$!-----------------------------------------------------------------'f$verify(0)
$! UPDATE.COM
$!
$! WASD VMS Web Services, Copyright (C) 1996-2020 Mark G.Daniel.
$! This package (all associated programs), comes with ABSOLUTELY NO WARRANTY.
$! This is free software, and you are welcome to redistribute it under the
$! conditions of the GNU GENERAL PUBLIC LICENSE, version 3, or later version.
$! http://www.gnu.org/licenses/gpl.txt
$!
$! Update the WASD Web Services Package.
$!
$ UPDATE_VERSION = "v11.5.1"
$!
$! 10-DEC-2014  MGD  check required privilege
$! 06-JUL-2010  MGD  bugfix; copy [example]wasd_config_msg.conf
$! 07-NOV-2009  MGD  v10.0.0, logical naming schema
$! 14-SEP-2007  MGD  up-case procedure spec to avoid mixed-case issues
$! 19-JUL-2007  MGD  bugfix; parse of HT_ROOT with rooted logical (Tim Sneddon)
$! 13-MAR-2006  MGD  v9.1.4, shutdown.com
$! 27-NOV-2004  MGD  v9.0, new startup, message file
$! 23-DEC-2003  MGD  IA64 support
$! 23-JAN-2003  MGD  use subprocess defining HT_ROOT and HT_EXE in case the
$!                   'update' is not on a "real" WASD site (e.g. SSL update)
$! 07-DEC-2002  MGD  v8.1, major revision
$! 08-JUN-2002  MGD  v8.0, new message database
$! 03-NOV-2001  MGD  v7.2.1, PERSONA_MACRO build
$! 08-JUL-2001  MGD  v7.2, new startup
$! 04-NOV-2000  MGD  v7.1, new startup
$! 20-MAY-2000  MGD  v7.0, new message database
$! 30-NOV-1999  MGD  v6.1, new message database,
$!                         independant UPDATESSL.COM,
$!                         remove NETLIB support,
$!                         remove SSLeay support
$!                         bugfix; HT_ROOT derived from concealed device
$! 18-SEP-1999  MGD  OpenSSL 0.9.4
$! 05-MAY-1999  MGD  V6.0, new message database,
$!                         OpenSSL (Richard Levitte) distribution
$! 14-NOV-1998  MGD  v5.3, new server startup procedure
$! 03-SEP-1998  MGD  v5.2, no change
$! 27-JUN-1998  MGD  initial, v5.1 (and some would say long overdue!)
$!-----------------------------------------------------------------------------
$!
$ if f$trnlnm("INSTALL$DBUG") .nes. "" then set verify
$!
$ set noverify
$ ss$_abort = 44
$ ss$_bugcheck = 676
$ P1 = f$edit(P1,"upcase")
$ P2 = f$edit(P2,"upcase")
$ delete = "delete"
$ copy = "copy"
$ purge = "purge/log"
$ say = "write sys$command"
$ vms_version = f$integer(f$extract(1,1,f$getsyi("version"))) * 10 +-
                f$integer(f$extract(3,1,f$getsyi("version")))
$ if vms_version .ge. 72 then set process /parse=traditional
$ archName = f$edit(f$getsyi("ARCH_NAME"),"UPCASE")
$ if archName .eqs. "ALPHA" then archName = "AXP"
$ set control=Y
$ on controly then exit ss$_abort
$!
$ if f$trnlnm("WASD_ROOT","LNM$SYSTEM") .eqs. "" .and. -
     f$trnlnm("HT_ROOT","LNM$SYSTEM") .eqs. ""
$ then
$    type sys$input
                  *******************************************
                  *  "WASD_ROOT" LOGICAL NAME NOT DETECTED. *
                  *    THIS DOES NOT LOOK LIKE AN UPDATE!   *
                  *******************************************

$    exit ss$_abort
$ endif
$!
$ if f$trnlnm("WASD_ROOT","LNM$JOB") .eqs. ""
$ then
$!   (subprocess to do the actual work, define local logicals)
$    procCom = f$edit(f$environment("PROCEDURE"),"upcase")
$    wasdRoot = f$parse(procCom,,,"DEVICE","NO_CONCEAL") + -
                f$parse(procCom,,,"DIRECTORY","NO_CONCEAL") - -
                "][" - ".000000" - "000000." - ".INSTALL]" + ".]"
$    define /job /nolog /translation=concealed WASD_ROOT 'wasdRoot'
$    wasdExe = "WASD_ROOT:[''archName']"
$    define /job /nolog WASD_EXE 'wasdExe'
$!   (spawn a subprocess to do the actual install ensures job logical deletion)
$    set noon
$    spawn /wait @'procCom' "''P1'" "''P2'"
$    set on
$    deassign /job WASD_ROOT
$    deassign /job WASD_EXE
$    exit
$ endif
$!
$ if f$environment("depth") .le. 2
$ then
$    type sys$input

        WASD VMS Web Services, Copyright (C) 1996-2020 Mark G.Daniel.
  This package (all associated programs), comes with ABSOLUTELY NO WARRANTY.
   This is free software, and you are welcome to redistribute it under the
 conditions of the GNU GENERAL PUBLIC LICENSE, version 3, or any later version.
                    http://www.gnu.org/licenses/gpl.txt

$ endif
$!
$ currentDefault = f$environment("DEFAULT")
$!
$ type sys$input
               ******************************************
$ say "               *  UPDATE WASD VMS Web Services ''UPDATE_VERSION'  *"
$ type sys$input
               ******************************************

$ if P1 .nes. "SERVER" .and. P2 .nes. "SERVER"
$ then
$    type sys$input
If the server executable only is required to be updated then restart this
procedure with "SERVER" as a parameter.

$ endif
$ type sys$input
All sections making file-system modifications may be individually declined.
In this sense the update may be undertaken step-by-step or sections repeated.
The first section is COMPILING/LINKING, after which you will be able to quit.
In a mixed architecture cluster (including Alpha, Itanium and/or VAX systems)
the compile/link section must be done on any required to serve!

$ read sys$command response /prompt="Press RETURN to continue: "
$ say ""
$!
$ if .not. f$privilege("SYSPRV")
$ then
$    type sys$input
                        *****************************
                        *  requires SYSPRV enabled  *
                        *****************************

$    exit ss$_abort
$ endif
$!
$ if f$search("wasd_root:[000000]*.*") .eqs. ""
$ then
$    type sys$input
          ***********************************************************
          *  APPEARS TO BE A PROBLEM WITH THE "WASD_ROOT" LOGICAL!  *
          ***********************************************************

$    exit ss$_abort
$ endif
$!
$!(cleanup any pre 8.1 installation and/or update procedures)
$ if f$search("wasd_root:[000000]install%*.com") .nes. ""
$ then
$    set noon
$    delete/nolog/noconfirm wasd_root:[000000]install%*.com;*
$    set on
$ endif
$ if f$search("wasd_root:[000000]update%*.com") .nes. ""
$ then
$    set noon
$    delete/nolog/noconfirm wasd_root:[000000]update%*.com;*
$    set on
$ endif
$!
$ if P1 .eqs. "CLEAN"
$ then
$    @WASD_ROOT:[INSTALL]UPDATE_CLEANUP.COM
$    exit
$ endif
$!                         ***********************
$!                         *  BUILD EXECUTABLES  *
$!                         ***********************
$!
$!(the only parameter that is intended to be passed here is "SSL")
$ @WASD_ROOT:[INSTALL]BUILD.COM 'p1'
$!
$ type sys$input
                          ************************
                          *  SERVER QUICK-CHECK  *
                          ************************

This executes the package demonstration procedure, allowing the basic package
to be evaluated or checked.  You may run this at any time to again check the
$ if P1 .eqs. "SSL"
$    then type sys$input
package for basic functionality using $ @WASD_ROOT:[INSTALL]DEMO.COM SSL

$    else type sys$input
package for basic functionality using $ @WASD_ROOT:[INSTALL]DEMO.COM

$ endif
$ response = ""
$ read sys$command response /prompt="Execute the demonstration procedure? [NO]: "
$ say ""
$ if response
$ then
$    if P1 .eqs. "SSL"
$       then @WASD_ROOT:[INSTALL]DEMO.COM SSL
$       else @WASD_ROOT:[INSTALL]DEMO.COM
$    endif
$ endif
$!
$ if P1 .eqs. "SSL"
$ then
$!   (backward-compatibility in the way SSL used to built)
$    type sys$input
                     **********************************
                     *  SSL UPDATE   C O M P L E T E  *
                     **********************************

$    exit
$ endif
$!
$ if P1 .eqs. "SERVER"
$ then
$    type sys$input
                    *************************************
                    *  SERVER UPDATE   C O M P L E T E  *
                    *************************************

$    exit
$ endif
$!
$ type sys$input
                           **********************
                           *  CONTINUE UPDATE?  *
                           **********************

$ response = ""
$ read sys$command response /prompt="Continue the update? [NO]: "
$ say ""
$ if .not. response then exit
$!
$ type sys$input
                         **************************
                         *  CHECK DOCUMENTATION?  *
                         **************************

$ response = ""
$ read sys$command response /prompt="Check [WASDOC] content? [NO]: "
$ say ""
$ if response then @WASD_ROOT:[WASDOC]CHECK.COM
$!
$ if f$search("wasd_root:[axp-bin]*.exe") .eqs. "" .and. -
     f$search("wasd_root:[cgi-bin]*.com") .eqs. "" .and. -
     f$search("wasd_root:[log_server]*.log") .eqs. "" .and. -
     f$search("wasd_root:[vax-bin]*.exe") .eqs. ""
$ then
$    type sys$input
                     ***********************************
                     *  UPDATE PRE-8.0.1 INSTALLATION  *
                     ***********************************

This looks like a pre-8.0.1 update (no files in [AXP-BIN], [CGI-BIN],
[LOG_SERVER] or [VAX-BIN]).  If this is not the case then consider carefully
whether you should continue with this update.

$    response = "NO"
$    read sys$command response /prompt="Continue? [NO]: "
$    say ""
$    if response .eqs. "" then response = "NO"
$    if .not. response then exit ss$_abort
$    @WASD_ROOT:[INSTALL]SECURE_PRE81_INFO.COM
$ endif
$!
$ if f$search ("WASD_ROOT:[LOCAL]*STARTUP*.COM") .nes. ""
$ then
$    type sys$input
                  *****************************************
                  *  STARTUP PROCEDURES FOUND IN [LOCAL]  *
                  *****************************************

Startup procedures have been found in [LOCAL].  This indicates that this site
still has the version 8.0 or earlier structure.  These files will be renamed to
*.COM_ and should be deleted soon.  You will be required to respond YES when
asked to "UPDATE TO V8.1 STARTUP PROCEDURES" at the next step.
 
$    response = "YES"
$    read sys$command response /prompt="Modify startup procedures now? [YES]: "
$    say ""
$    if response .eqs. "" then response = "YES"
$    if response
$    then
$       copy = "copy/log"
$       copy wasd_root:[local]*startup*.com;0 wasd_root:[local]*.com_;0
$       delete = "delete"
$       delete wasd_root:[local]*startup*.com;*
$       say ""
$    endif
$ endif
$!
$ type sys$input
                   ****************************************
                   *  UPDATE TO V10.0 STARTUP PROCEDURES  *
                   ****************************************

Updating to version 10.0 from any other REQUIRES MODIFIED STARTUP procedures.
The new WASD logical naming schema is supported by these procedures.
It is STRONGLY recommended they be used!

  [EXAMPLE]STARTUP.COM           to   [STARTUP]STARTUP.COM
  [EXAMPLE]SHUTDOWN.COM          to   [STARTUP]SHUTDOWN.COM
  [EXAMPLE]STARTUP_SERVER.COM    to   [STARTUP]STARTUP_SERVER.COM
  [EXAMPLE]STARTUP_DECNET.COM    to   [STARTUP]STARTUP_DECNET.COM
  [EXAMPLE]WASD_FILE_DEV.COM     to   [000000]WASD_FILE_DEV.COM

If you decline they will be copied as STARTUP*_LATEST.COM instead (good luck!)

$ response = ""
$ read sys$command response /prompt="Update startup procedures? [NO]: "
$ say ""
$ copy = "copy/log"
$ if response
$ then
$    copy wasd_root:[example]startup.com wasd_root:[startup]
$    copy wasd_root:[example]shutdown.com wasd_root:[startup]
$    copy wasd_root:[example]startup_server.com wasd_root:[startup]
$    copy wasd_root:[example]startup_decnet.com wasd_root:[startup]
$    if f$search("wasd_root:[startup]startup_local.com") .eqs. "" -
        then copy wasd_root:[example]startup_local.com wasd_root:[startup]
$    copy wasd_root:[example]wasd_file_dev.com wasd_root:[000000]
$ else
$    copy wasd_root:[example]startup.com wasd_root:[startup]startup_latest.com
$    copy wasd_root:[example]shutdown.com wasd_root:[startup]shutdown_latest.com
$    copy wasd_root:[example]startup_server.com wasd_root:[startup]startup_server_latest.com
$    copy wasd_root:[example]startup_decnet.com wasd_root:[startup]startup_decnet_latest.com
$    copy wasd_root:[example]startup_local.com wasd_root:[startup]startup_local_latest.com
$    copy wasd_root:[example]wasd_file_dev.com wasd_root:[000000]wasd_file_dev_latest.com
$    purge = "purge"
$    purge wasd_root:[startup]*_latest.com
$ endif
$ say ""
$!
$ if f$trnlnm ("HTTPD$MSG") .eqs. "" .and. -
     f$trnlnm ("WASD_CONFIG_MSG") .eqs. ""
$ then
$    type sys$input
                ********************************************
                *  "HTTPD$MSG" not found and not updated.  *
                *     This logical should be defined!      *
                ********************************************

$ else
$    type sys$input
                   ***************************************
                   *  UPDATE MESSAGE CONFIGURATION FILE  *
                   ***************************************

This version uses the v9.0/v10.0 WASD_CONFIG_MSG configuration file.
If you are currently using less than v9.0 you will need to update.

$    response = ""
$    read sys$command response /prompt="Update your current version now? [NO]: "
$    say ""
$    if response
$    then
$       copy = "copy/log"
$       copy wasd_root:[example]wasd_config_msg.conf wasd_root:[local]
$       say ""
$    endif
$ endif
$!
$ if f$search("wasd_root:[axp-bin]*.exe") .eqs. "" .and. -
     f$search("wasd_root:[cgi-bin]*.com") .eqs. "" .and. -
     f$search("wasd_root:[log_server]*.log") .eqs. "" .and. -
     f$search("wasd_root:[vax-bin]*.exe") .eqs. ""
$ then
$!   (conclude that this is a pre version 8.0.1 update site)
$    @WASD_ROOT:[INSTALL]SCRIPTS_ALL.COM
$ endif
$!
$ type sys$input
                        ****************************
                        *  UPDATE PACKAGE SCRIPTS  *
                        ****************************

The procedure WASD_ROOT:[INSTALL]SCRIPTS.COM updates package scripts.
It prompts for selected groups of scripts to be installed (perhaps updated) or
removed.  More information is available when using the procedure.  Scripts
available with this release of the package will not be available for use by the
server until this procedure is performed.

You can execute the procedure now or do it later manually.

$ response = ""
$ read sys$command response /prompt="Execute the procedure now? [NO]: "
$ say ""
$ if response
$ then
$    @WASD_ROOT:[INSTALL]SCRIPTS.COM
$!   'f$verify(0)
$    set default 'currentDefault'
$ endif
$!
$!
$ type sys$input
                       ******************************
                       *  REAPPLY SECURITY PROFILE  *
                       ******************************

The procedure WASD_ROOT:[INSTALL]SECURE.COM resets a site's file structure
and server/scripting accounts to a default installation.  It is recommended to
reapply these settings periodically to ensure the package-default security
environment has not been compromised.  This activity is not without potential
side-effects however.  If changes have been made to cater for specific
scripting requirements, etc., these may be rendered non-working.  Refer to the
"Technical Overview" for more detailed information.

You can execute the procedure now or do it at any other time manually.

$ response = ""
$ read sys$command response /prompt="Execute the procedure now? [NO]: "
$ say ""
$ if response
$ then
$    @WASD_ROOT:[INSTALL]SECURE.COM
$!   'f$verify(0)
$    set default 'currentDefault'
$ endif
$!
$ type sys$input
                  ****************************************
                  *  CLEAN UP AFTER PREVIOUS VERSION(S)  *
                  ****************************************

The procedure WASD_ROOT:[INSTALL]UPDATE_CLEANUP.COM deletes files from previous
versions no longer in use and otherwise cleans up after older versions of WASD. 
(It is generally fairly conservative, but no guarantees.)

You can execute the procedure now or do it later manually.

$ response = ""
$ read sys$command response /prompt="Execute the procedure now? [NO]: "
$ say ""
$ if response
$ then
$    @WASD_ROOT:[INSTALL]UPDATE_CLEANUP
$!   'f$verify(0)
$    set default 'currentDefault'
$ endif
$!
$ type sys$input
                            *********************
                            *  PURGE OLD FILES  *
                            *********************

Performs a purge of the WASD_ROOT:[000000] tree, removing replaced versions.
You can purge now or do it later manually using PURGE WASD_ROOT:[000000...].

$ response = ""
$ read sys$command response /prompt="Purge now? [NO]: "
$ say ""
$ if response
$ then
$    purge WASD_ROOT:[000000...]
$    say ""
$ endif
$!
$ type sys$input
                        *****************************
                        *  UPDATE  C O M P L E T E  *
                        *****************************

$!-----------------------------------------------------------------------------