??I)I~~MSGHLP$$T_KEY_FACILITY K)MSGHLP$$L_KEY_RECORD_ID )his message occurs on pre-Version 7.2 systems when you>attempt to access a disk that was initialized on a Version 7.2;or later system. Version 7.2 extends the size of the BITMAP9field and the increased size is incompatible with earlier versions.CACC, Accounting Util!t1RU MERGE, 'n' records to be mergedity>When the /LOG qualifier is used with the /SORT qualifier, this4message displays the number of records to be merged.None. @{1qt?INPUT, 'file-spec', 'n' records selected, 'n' records rejectedity:When the /LOG qualifier is used, this message displays how9many records were selected and/or rejected for each inputfile.None.=1nqtotal number of records that were selected and/or rejected, as2well as the total number of input files processed.None. ?}1ps>INVACCREC, record 'record' has invalid or unrecognized formatity>A record in the accounting file has an invalid or unrecognized=format. The facility attempts to continue processing records.;Verify that the accounting file is valid for OpenVMS. CheckOUNTING11111ACC, Accounting UtilityLEDIT, Access Cont#+1M\SYNTAX, invalid ACE syntaxrol List Editor:An error was encountered trying to parse the ACE currently>being entered. The portion of the ACE after the point of error is displayed.*Correct the error and enter the ACE again.Y!C#C1t(kBPREVDUPACE, previous ACE will supercede current ACE - not enteredrol List Editor>An ACE already exists prior to the current position within theThe current ACE is protected against deletion. This is usually8because it is an application ACE or it is marked hidden.None. PE#J1vbDSUCCDUPACE, current ACE will supercede succeeding ACE - not enteredrol List Editor;An ACE already exists after the current position within the:ACL, and would be rendered useless by the current ACE. Thecurrent ACE is not entered.=Modify or delete the current ACE or the succeeding occurrence of the ACE. FME, ACM Dispatcher[']J1FBCONTACTSYSMGR, requested operation has failed; contact the system manager Flow Control Codes=The ACME server or an ACME agent encountered some failure notdue to any action of the user./Choose the proper role-based action as follows: End User:;A failure beyond your control has prevented authentication."Report this to the system manager.System Manager:Make a note of this error and tell the system manager what you#were doing when the error occurred.System Manager:7This message should never be presented to the end user.:Consult the author or vendor of the program being used. IfMake a note of this error and tell the system manager what you#were doing when the error occurred.System Manager:7This message should never be presented to the end user.:Consult the author or vendor of the program being used. Ifpassword callout routine when both of the following conditionsoccur:8o The new password selected by the user is unacceptable.9o No ACME agent has indicated that it cannot retry with a different password.'1NaWAITAST, wait for AST event Flow Control Codes;An ACME authentication and password callout routine returns7this code to request that processing of this request besuspended pending AST delivery./Choose the proper role-based action as follows: End User:>Make a note of this error and tell the system manager what you#were doing when the error occurred.System Manager:7This message should never be presented to the end user.:Consult the author or vendor of the program being used. IfMake a note of this error and tell the system manager what you#were doing when the error occurred.System Manager:7This message should never be presented to the end user.:Consult the author or vendor of the program being used. IfThe VMS ACME returns this status code if an account is expired:in the SYSUAF record for this user. You may want your ACMEshare this failure information with unprivileged users so that5it cannot be used to guess passwords or plan attacks.ACME Programmer:security policy that prevents this password from being changedby the end user.ACME Programmer:>The VMS ACME returns this status code if the SYSUAF record for=this user indicates the password is locked. You may want your8ACME agents to do the same, based on their own controls.p "1S]d!PWDEXPIRED, password has expiredlure Codesreturning the status code ACME$_PERFORMDIALOGUE. When you call;SYS$ACM[W] again, repeat the queueing of the dialogue entrythat received the error.k$UX1}@DUPCREDTYP, credentials of the specified type have already been issuedCodesA call to ACME callback routine ACME$CB_ACQUIRE_RESOURCE couldnot be fulfilled./Choose the proper role-based action as follows:ACME Programmer:7In the likely event that your ACME agent cannot proceed:without the ACME-specific resource, return the code ACME$_9WAITRESOURCE to have your ACME agent called again at this;ACME callout routine after an ACME-specific resource of the:specified type becomes available. (Note that even when the=resource becomes available, another request might make use of;the resource first, causing your ACME agent to have to waitagain.)&&111bg0UNSUPPORTED, requested operation is unsupportedCodes8An ACME agent attempted to call an ACME callback routineyou can press Ctrl/Y to abort this command and enter a commandthat specifies /CANCEL.>Note: Any new requests are queued, but they are not dispatched1to the server until the server resumes operation...HC+1t@BDUPACME, an agent with the specified name has already been loadedR and SHOW SERVER CodesERRCLOSELOGFIL, error closing log file; status = 'hex-number'R and SHOW SERVER Codes-The ACME$SERVER log file could not be closed./Choose the proper role-based action as follows:System Manager:>Examine the error status. If the error is not due to a device->off-line condition or another correctable situation, contact aCompaq support representative.00~Jh+F1JDERROPENCONFIGSFIL, error opening configuration staging file; status" = 'hex_number'R and SHOW SERVER Codes5The ACME server could not open the ACME$SERVER_CONFIG2configuration logging file upon startup. Automatic0reconfiguration on restart will not be possible./Choose the proper role-based action as follows:System Manager:;Look at the value of the logical name ACME$SERVER_CONFIG to>see if it points to a nonexistent directory or a full disk. If=ACME$SERVER_CONFIG is not defined as a logical name, the filestate if you subsequently restart the server. You will have toestablish the state explicitly.11UK>+.1og=ERROPENLOGFIL, error opening log file; status = 'hex-number'R and SHOW SERVER Codes-The ACME$SERVER log file could not be opened./Choose the proper role-based action as follows:System Manager:>Look at the value of the logical name ACME$SERVER to see if it1points to a nonexistent directory or a full disk.22Lh+1K%DERROPENRESTARTFIL, error opening configuration restart file; status" = 'hex_number'R and SHOW SERVER Codessee if it points to a nonexistent directory or a full disk. If>ACME$SERVER_RESTART is not defined as a logical name, the file=will be named SYS$SYSTEM:ACME$SERVER_RESTART.DAT. If the fileable to recover its previous configuration state. You may have"to establish the state explicitly.33\M?+/1pn>ERRWRITELOGFIL, error writing log file; status = 'hex-number'R and SHOW SERVER Codes.The ACME$SERVER log file could not be written./Choose the proper role-based action as follows:System Manager:8Check the status value displayed in the message to learn
The ACME server or an ACME agent encountered a failure not dueto user action./Choose the proper role-based action as follows:System Manager:2If logging is enabled, look in the ACME$SERVER log6file for a detailed description. If ACME$SERVER is not5defined as a logical name, the log file will be namedSYS$MANAGER:ACME$SERVER.LOG.8Note: By default, the ACME server does not start up withReturn this code from your ACME agent control callout routines>only after using ACME callback routine ACME$CB_SEND_LOGFILE to$record circumstances of the failure.55}O/+1`w.INACTIVE, authentication server is not activeR and SHOW SERVER Codes>The authentication server process (ACME_SERVER) was not active;when an attempt was made to stop, disable, or configure theserver./Choose the proper role-based action as follows:System Manager:An unprivileged caller (that is, a caller running in user mode>without SECURITY privilege) has exceeded the maximum number of=iterative requests that can be made in a dialogue sequence of2calls. The default is set at 26 dialogue requests.6A user with SYSNAM privilege can change the default by7defining the executive mode logical name ACME$DIALOGUE_;ITERATIVE_LIMIT in the LNM$SYSTEM_TABLE table. For example:< $ DEFINE/SYSTEM/EXECUTIVE ACME$DIALOGUE_ITERATIVE_LIMIT 52Valid values are 1 through 100.C5Zg1?DOIUNAVAILABLE, the domain of interpretation is not processing requests] Codes;The DOI specified as a target in the call to the SYS$ACM[W]*system service is not currently available./Choose the proper role-based action as follows:System Manager:Review the arguments provided to the SYS$ACM[W] system service.to determine which ones are causing the error. C ;&21W^%NOACMECTX, no ACME context is active] CodesReview the ACME$SERVER log to look for a failure in ACME agentReview the arguments provided to the SYS$ACM[W] system service4to determine which ones are causing the status code. CB>8yk1ipT7NOSUCHDOI, the domain of interpretation does not exist] Codes=An ACME agent supporting the DOI specified as a target in the:call to the SYS$ACM[W] system service has not been loaded./Choose the proper role-based action as follows: End User:=Contact your system manager and provide information about the;type of operation and the principal name used, and indicateA programming error has occurred. The caller of the SYS$ACM[W]7system service must perform more dialogue processing tocomplete the request./Choose the proper role-based action as follows:ACM Client Programmer:>Review your dialogue mode calling sequence to ensure that yourshare this failure information with unprivileged users so that5it cannot be used to guess passwords or plan attacks.ACME Programmer:security policy that prevents this password from being changedby the end user.ACME Programmer:>The VMS ACME returns this status code if the SYSUAF record for=this user indicates the password is locked. You may want your8ACME agents to do the same, based on their own controls.p "1S]d!PWDEXPIRED, password has expiredlure Codesreturning the status code ACME$_PERFORMDIALOGUE. When you call;SYS$ACM[W] again, repeat the queueing of the dialogue entrythat received the error.k$UX1}@DUPCREDTYP, credentials of the specified type have already been issuedCodesA call to ACME callback routine ACME$CB_ACQUIRE_RESOURCE couldnot be fulfilled./Choose the proper role-based action as follows:ACME Programmer:7In the likely event that your ACME agent cannot proceed:without the ACME-specific resource, return the code ACME$_9WAITRESOURCE to have your ACME agent called again at this;ACME callout routine after an ACME-specific resource of the:specified type becomes available. (Note that even when the=resource becomes available, another request might make use of;the resource first, causing your ACME agent to have to waitagain.)&&111bg0UNSUPPORTED, requested operation is unsupportedCodes8An ACME agent attempted to call an ACME callback routineyou can press Ctrl/Y to abort this command and enter a commandthat specifies /CANCEL.>Note: Any new requests are queued, but they are not dispatched1to the server until the server resumes operation...HC+1t@BDUPACME, an agent with the specified name has already been loadedR and SHOW SERVER CodesERRCLOSELOGFIL, error closing log file; status = 'hex-number'R and SHOW SERVER Codes-The ACME$SERVER log file could not be closed./Choose the proper role-based action as follows:System Manager:>Examine the error status. If the error is not due to a device->off-line condition or another correctable situation, contact aCompaq support representative.00~Jh+F1JDERROPENCONFIGSFIL, error opening configuration staging file; status" = 'hex_number'R and SHOW SERVER Codes5The ACME server could not open the ACME$SERVER_CONFIG2configuration logging file upon startup. Automatic0reconfiguration on restart will not be possible./Choose the proper role-based action as follows:System Manager:;Look at the value of the logical name ACME$SERVER_CONFIG to>see if it points to a nonexistent directory or a full disk. If=ACME$SERVER_CONFIG is not defined as a logical name, the filestate if you subsequently restart the server. You will have toestablish the state explicitly.11UK>+.1og=ERROPENLOGFIL, error opening log file; status = 'hex-number'R and SHOW SERVER Codes-The ACME$SERVER log file could not be opened./Choose the proper role-based action as follows:System Manager:>Look at the value of the logical name ACME$SERVER to see if it1points to a nonexistent directory or a full disk.22Lh+1K%DERROPENRESTARTFIL, error opening configuration restart file; status" = 'hex_number'R and SHOW SERVER Codessee if it points to a nonexistent directory or a full disk. If>ACME$SERVER_RESTART is not defined as a logical name, the file=will be named SYS$SYSTEM:ACME$SERVER_RESTART.DAT. If the fileable to recover its previous configuration state. You may have"to establish the state explicitly.33\M?+/1pn>ERRWRITELOGFIL, error writing log file; status = 'hex-number'R and SHOW SERVER Codes.The ACME$SERVER log file could not be written./Choose the proper role-based action as follows:System Manager:8Check the status value displayed in the message to learn
The ACME server or an ACME agent encountered a failure not dueto user action./Choose the proper role-based action as follows:System Manager:2If logging is enabled, look in the ACME$SERVER log6file for a detailed description. If ACME$SERVER is not5defined as a logical name, the log file will be namedSYS$MANAGER:ACME$SERVER.LOG.8Note: By default, the ACME server does not start up withReturn this code from your ACME agent control callout routines>only after using ACME callback routine ACME$CB_SEND_LOGFILE to$record circumstances of the failure.55}O/+1`w.INACTIVE, authentication server is not activeR and SHOW SERVER Codes>The authentication server process (ACME_SERVER) was not active;when an attempt was made to stop, disable, or configure theserver./Choose the proper role-based action as follows:System Manager:hash value of a proposed new password is present and unexpired>in its password history file. You may want your ACME agents to)do the same, based on their own controls.5-1f4PWDINVALID, unspecified password policy restriction Codes (Password Quality)covered by any other password quality secondary status for theACME facility. 2-1c| 1PWDINVCHAR, password contains invalid characters Codes (Password Quality)5The Authenticate Principal or Change Password request:failed because a proposed new password contains charactersunacceptable to the ACME agent./Choose the proper role-based action as follows: End User:6Choose a password without the unacceptable characters.ACME Programmer::When another ACME agent has indicated it cannot handle new;password retries, the VMS ACME calls ACME$CB_SET_2ND_STATUS6with this status code and then returns ACME$_INVNEWPWD7if a proposed new password contains characters that are9unacceptable for the password hash algorithm indicated in>the SYSUAF record for this user. You may want your ACME agents,to do the same, based on their own controls.,-s1]v+PWDTOOEASY, password can be easily guessed Codes (Password Quality)your ACME agents to do the same, based on their own standards.2-1c| 1PWDTOOLONG, password greater than maximum length Codes (Password Quality)security auditing log may warrant an investigation regarding a#possible attack against the system.:If the account of a legitimate user was locked, reconsider=the administrative decision to lock this account. For the VMS:ACME, the control is the DISUSER flag in the SYSUAF record>for this user. Consult the appropriate documentation for other;ACME agents to determine when they might return this statuscode.ACME Programmer:=For confidentiality, your ACME agent should call ACME$CB_SET_>2ND_STATUS with this status code to indicate the precise cause9of the authentication failure for accounting and securitysecurity auditing log may warrant an investigation regarding a#possible attack against the system.;Alternatively, a legitimate user may be having difficulties logging in.ACME Programmer:=For confidentiality, your ACME agent should call ACME$CB_SET_>2ND_STATUS with this status code to indicate the precise cause9of the authentication failure for accounting and securitysecurity auditing log may warrant an investigation regarding a#possible attack against the system.9Alternatively, a legitimate user may just be having a bad password day.ACME Programmer:=For confidentiality, your ACME agent should call ACME$CB_SET_>2ND_STATUS with this status code to indicate the precise cause9of the authentication failure for accounting and securityFor confidentiality, the VMS ACME calls ACME$CB_SET_2ND_STATUS:with this status code to indicate the precise cause of theThen the VMS ACME returns the status code ACME$_AUTHFAILURE to the user. C'`1t:BMAPCONFLICT, principal name maps to a different OpenVMS user name Codes (Privileged)9An unprivileged caller asked to merge credentials using a7principal name that an ACME agent mapped to a different7OpenVMS user name than that associated with the currentprocess./Choose the proper role-based action as follows:System Manager:6Presence of this status code in the accounting file or>security auditing log may warrant an investigation regarding a#possible attack against the system.=Investigate the software being used to see if a configurationerror is causing this problem.ACME Programmer:=For confidentiality, your ACME agent should call ACME$CB_SET_>2ND_STATUS with this status code to indicate the precise cause9of the authentication failure for accounting and security'Q1o|=NOEXTAUTH, principal name cannot be authenticated externally Codes (Privileged)>The attempted use of external authentication is not authorized:for the specified principal name. An ACME agent other than=the VMS ACME successfully authenticated a principal name thatsecurity auditing log may warrant an investigation regarding a#possible attack against the system.=It is more likely that this message indicates a configuration"error with one of the ACME agents.ACME Programmer:>For confidentiality, the VMS ACME calls ACME$CB_SET_2ND_STATUS:with this status code to indicate the precise cause of theThen the VMS ACME returns the status code ACME$_AUTHFAILURE to the user.?'$1p>NOLOCAUTH, not authorized to override external authentication Codes (Privileged)auditing log may warrant an investigation regarding a possibleattack against the system.ACME Programmer:>For confidentiality, the VMS ACME calls ACME$CB_SET_2ND_STATUS:with this status code to indicate the precise cause of theThen the VMS ACME returns the status code ACME$_AUTHFAILURE to the user.9'71j}8NOSUCHUSER, principal name does not exist or is invalid Codes (Privileged)auditing log may warrant an investigation regarding a possibleattack against the system.ACME Programmer:=For confidentiality, your ACME agent should call ACME$CB_SET_>2ND_STATUS with this status code to indicate the precise cause9of the authentication failure for accounting and securityACPI failed to properly locate and load firmware configuration8tables during system boot. This indicates a problem with8system firmware or a significant image revision mismatch!between ACPI and system firmware.Contact HP Customer Support./0h1`|~.OSLDEV, Error getting handle to parent objectguration and Power Interfacetables. If the device being configured is essential for proper=system operation, a BUGCHECK will occur. This could be caused8by system firmware or detection of an unsupported deviceconfiguration.9None. This message indicates a system firmware bug, which-should be fixed in a future firmware release.*0h1[wV)OSLDEV, Error getting device informationguration and Power InterfaceREGDECCON, register declaration conflict in routine 'routine- descriptor'ler for OpenVMS Alpha;The compiler detected a conflict within a routine between a9PRESERVE register clause and an OUTPUT or SCRATCH clause."Correct the register declarations.$)S1Uj#UNALGLOLAB, unaligned global labeller for OpenVMS Alpha>The compiler detected an unaligned global label (also known asan external label).Align this global reference. 0)1av%/ILLREGHERE, this register may not be used hereler for OpenVMS Alpha:The PC register cannot be used in the following addressing2modes: register, register deferred, autodecrement,*autoincrement, and autoincrement deferred.Use another register. *).1[p)REGOPSYNX, register operand syntax errorler for OpenVMS Alpha-The addressing mode syntax contains an error.Correct the syntax.!! $)f#1Uj#ILLREGNUM, illegal register numberler for OpenVMS Alpha>A register name is not the AP, FP, SP, or PC register name, or&it is not in the range R0 through R12."Correct the illegal register name.""w/)1`u.POSCODEGEN, possible run-time code generationler for OpenVMS Alpha:The compiler detected a branch to a stack location or to aA branch to a destination that is the offset from a label (for$example, BLSS FOO+2) is not allowed.;Place a label at the destination, and branch to that label.%%ME)1vD_DPOSCOROUT, possible co-routine call in routine 'routine-descriptor'ler for OpenVMS Alpha>The compiler detected a coroutine call that transfers control,=via a JSB instruction, to a return address on the stack. Such;coroutine calls are not supported on OpenVMS Alpha systems.;Rewrite the routines participating in the coroutine linkage9to exchange explicit callback addresses. Put the callbackcoroutine can then invoke the other by using a JSB instruction(to the other's callback address routine.&&_)x1^=MEMREFNOT, memory reference not naturally aligned in routine 'routine-descriptor'ler for OpenVMS Alpha>The compiler detected a memory reference that is not naturally=aligned (that is, a byte on a byte boundary, a word on a word;boundary, a longword on a longword boundary, and so forth).=If performance is a concern, correct the alignment by padding9the memory reference or by promoting it to a larger unit.''[)21pAUNALMEMSTO, unaligned memory address stored in routine 'routine- descriptor'ler for OpenVMS Alpha8The compiler detected the storage of an unaligned memory5reference in the routine. Stored memory addresses are=assumed to be aligned. Aligned memory references to unaligned!addresses can impair performance.1To improve performance, align the memory address.((# U)e515WORDALSTK, word aligned stack in routine 'routine-descriptor'ler for OpenVMS Alpha6A word-aligned stack in the routine conflicts with the>octaword alignment of the stack by the compiler. This conflict7can cause unaligned stack references or cause the stackpointer to become unaligned.8Change the alignment in the routine from word-aligned tooctaword-aligned.++* C)41t<BILLRSBCAL, illegal RSB in CALL_ENTRY routine 'routine-descriptor'ler for OpenVMS Alpha6The code path to which the CALL_ENTRY routine branched:contains an RSB instruction. Such a CALL routine will fail at run time.3Replace the RSB instruction with a RET instruction.,,F)8d1w(EBRANCHBET, branch between routines from routine 'routine-descriptor'ler for OpenVMS Alpha7A branch from this routine to another routine occurred.>By default, the compiler saves and restores the contents of R2=through R11 if those registers are modified. If a register isto the appropriate entry point directive (.CALL_ENTRY or .JSB_ENTRY).--" U)d514UNDECCALL, undeclared local CALL target: 'routine-descriptor'ler for OpenVMS Alpha6The call destination is not declared with .CALL_ENTRY. Add the .CALL_ENTRY declaration.//')D1Xm&ADRLSTSYNX, address list syntax errorler for OpenVMS Alpha1\qr*ILLSTATINI, illegal static initializationler for OpenVMS Alpha;An invalid static initialization was detected. The compilerrestricts operations to:5 opr =where 'opr' represents all MACRO operators and 'constant' can>be an expression that equates to a compile-time constant. This=restriction applies to external symbols and operands that are*labels in other program sections (psects).9Static initialization directives using any operations are8supported on literals, symbols with constant values, andlabels in the same psect.=Revise the code to contain no more than two external symbols.66 " 7)1h}6DIROPDEF, opcodes generated with .OPDEF not supportedler for OpenVMS AlphaThe compiler detected use of .REFxx, which is not supported onOpenVMS Alpha systems.Replace .REFxx with a macro.::% !)'1Rg DIRSYNX, directive syntax errorler for OpenVMS Alpha&The directive contains a syntax error.Correct the syntax.;;%$)s1Uj#MISSINGEND, missing .END statementler for OpenVMS Alpha8There is no .END directive at the end of the module. The9assembler inserted an .END directive after the last line.Insert an .END directive.<<a& 0)^1avs/DIRTRANS, .TRANSFER directive is not supportedler for OpenVMS Alpha9A .TRANSFER directive was found. Transfer vectors are not#supported on OpenVMS Alpha systems.7Remove the transfer vector from the code. In its place,=specify a linker options file that includes the SYMBOL_VECTOR(statement when you link the object file.==& 8)#1i~7FRMPTRMOD, frame pointer modified in routine 'routine'ler for OpenVMS AlphaA write to FP was detected."Remove any stack frame references.>>& ))P;1Zo(ILLSYMLEN, symbol exceeds 31 charactersler for OpenVMS Alpha=The symbol name is too long. The assembler truncated the nameto 31 characters.:Specify a symbol name that has no more than 31 characters.??*C)H1tBBUGCHECK, compiler bugcheck, please report problem to maintainersler for OpenVMS AlphaAn argument to an .ENABLE or .DISABLE directive is not a legaloption.5Delete the option, or replace it with a legal option.EE8 #)+%1Ti"DIVBYZERO, division by zero errorler for OpenVMS Alpha*An expression contains a division by zero.$Change the values in the expression.FF8*)M-1[p)NOTENUFOPR, not enough operands suppliedler for OpenVMS Alpha=The instruction requires more operands than were specified inthe statement.,Add the operands, or change the instruction.GG9#):1Ti,"REPCNTTOO, repeat count too largeler for OpenVMS Alpha=A data storage directive specifies a count larger than 65535, for example:< .BYTE 1 [512*512] ; attempts to initialize 262144 bytes9Revise the directive to specify a count of 65535 or less.HH!:>)1oM3=BYTALSTK, byte aligned stack in routine 'routine-descriptor'ler for OpenVMS Alpha:The compiler detected a byte-aligned stack in the routine.9The compiler octaword-aligns the stack on calls. However,;references to the byte-aligned stack within the routine cancause alignment faults.=Inspect your code to determine if byte alignment of the stack>is necessary. If not, change the alignment in your source code;by padding the data elements or structures, or by promoting,the data structures from bytes to octawords.II;=)H1n )(1K`#GENERR, generated ERROR:ler for OpenVMS Alpha=An .ERROR directive is assembled; 'xxxxx' is the value of the;expression specified in the directive, and 'message' is the text specified in the directive.'Follow the instructions in the message.KK>B)1syAWRITOARG, Write to argument list in routine 'routine-descriptor'ler for OpenVMS Alpha;The compiler detected a write to the argument list, invoked:with CALLG. On OpenVMS VAX systems, a routine invoked with9CALLG can return values to its caller by writing into the6argument list, but this does not work on OpenVMS Alphasystems.8You can ignore this informational message if the routine:is never invoked with CALLG or if it is invoked with CALLG:but the caller does not expect to receive data back in the;argument block. Otherwise, you must change both the routine;and its callers to pass the return value by reference or byanother supported method.7The flagging option ARGLIST can be used to disable this flagging.LL@%)^41Vk$NOTFLAGOPT, not a legal FLAG optionler for OpenVMS Alpha=The compiler detected an illegal option to the FLAG qualifieron the MACRO/MIGRATION command.3Revise the code to include only legal FLAG options.ME$CB_QUEUE_DIALOGUE)arguments can be macro arguments or strings delimited by angle>brackets or the circumflex delimiters. Symbol arguments can be%absolute symbols or decimal integers.Correct the syntax.C )(1Mb#GENWRN, generated WARNING:ler for OpenVMS Alpha;A .WARN directive is assembled; 'xxxxx' is the value of the;expression specified in the directive, and 'message' is the text specified in the directive.'Follow the instructions in the message.D1)31bw0BADLEXFORM, illegal format for lexical functionler for OpenVMS Alpha2The macro string operator contains a syntax error.Correct the syntax.,H().1Yn>'MACLBFMTER, macro library format errorler for OpenVMS Alpha-A format error occurred in the MACRO library.:Retry the assembly and, if the error still occurs, use the:DCL command LIBRARY (see the HP OpenVMS DCL Dictionary) to+re-create the library from the source code.K/)1`u.ALIGNXCEED, alignment exceeds PSECT alignmentler for OpenVMS Alpha7The .ALIGN directive specifies an alignment larger than6the program section alignment. For example, the .PSECT9directive specifies byte alignment (the default), and the<.ALIGN directive specifies a longword alignment; or a .PSECT)directive specifies an invalid alignment.8Correct the conflicting alignments. The .PSECT directiveThe value of the expression cannot be stored in a longword (324bits). The assembler truncated the value to 32 bits.$Change the values in the expression.JT-)~k1^s\,NOTINANIF, statement outside condition bodyler for OpenVMS Alpha)H1o=EXPSTACKO, expression stack overflow, depth='decimal-number'ler for OpenVMS Alphaargument home_args=TRUE is specified without the argument max_$args, specify the argument max_args.X))K1Zo(NOTINMACRO, statement not in MACRO bodyler for OpenVMS Alpha>A .NARG, .ENDM, or .ENDR directive is used outside the context of a macro.Correct the code.YZ)W.1%@CANTRESSTK, cannot resolve stack reference in routine 'routine- descriptor'ler for OpenVMS Alpha=The SP reference cannot be resolved because its offset is nota compile-time constant.-Change the offset to a compile-time constant.Y ')H1Xm&EXPSTACKU, expression stack underflowler for OpenVMS AlphaThe compiler assumed the highest argument referenced and homedthe argument list.9Check the code to determine if the number of arguments is=less than or equal to the number reported by this message. IfModify the source program, if necessary, to detect and respondto the condition.8If either the /SHOW or the /CROSS_REFERENCE qualifier is;specified without /LIST, reenter the command with the /LIST qualifier.Ue])%1BgCALTRETADDR, alternate return address on stack in routine 'routine- descriptor'ler for OpenVMS AlphaBRNDIRLOC, branch directive ignored in locked memory sequenceler for OpenVMS Alpha1Yn'NOTLGLISOP, not a legal listing optionler for OpenVMS AlphaA branch instruction has a target that is within an LDx_L/STx_ C sequence.7To avoid this warning, rewrite the source code to avoid;branches within or into LDx_L/STx_C sequences. Branches out7of interlocked sequences are valid and are not flagged.\hE)mv1vnDRETADDRMOD, return address modified in routine 'routine-descriptor'ler for OpenVMS Alpha>The compiler detected an attempt to modify the return address.-This is not allowed on OpenVMS Alpha systems.>Rewrite the code that modifies the return address on the stack:to instead return a status value to its caller. The statuscan be either an explicit CALL/JSB in the source code, such as="JSB subroutine", or an implicit call that occurs as a result>of another instruction. For example, some instructions such as3MOVC and EDIV generate calls to run-time libraries.3To avoid this warning, move the routine call or theThe compiler found an STx_C instruction before finding an LDx_:L instruction. This indicates an ill-formed lock sequence.>Change the code so that the STx_C instruction follows the LDx_L instruction.((lX)~1-BRETINJSB, RET in JSB_ENTRY 'routine-descriptor', with non-scratch registersler for OpenVMS Alpha:A RET instruction was detected in a JSB_ENTRY routine that>preserves registers. These registers will not be restored whentaking the RET path.The operator is not an opcode, directive, user-defined opcode,0previously defined macro, or macro in a library.>Change the operator to a valid opcode, directive, or macro; ordefine the macro.** rl)z1,2BAPTEMPUSE, AP used as a temporary register is converted to R12 in( routine 'routine-descriptor'ler for OpenVMS Alpha=Because the routine modified AP, the compiler changed any use;of AP in the routine to R12. This message is informational.None.++s0)F&1av/CHECKUSE, check instruction use (MxPR or BUGx)ler for OpenVMS Alpha7BUGx pertains to the VAX architecture, not to the Alpha architecture.%Use the EVAX-BUGCHK built-in instead.,,s!)$1Rg OPRNDSYNX, operand syntax errorler for OpenVMS Alpha#An operand contains a syntax error.Correct the syntax.--Mv7)O1h}_6CHKABSADR, absolute addressing mode should be checkedler for OpenVMS Alpha;The compiler generated code for an instruction that uses anabsolute address; for example:6 MOVL R1, @#200 ; Store value in R1 at location #200should be changed. The only code addresses that can legally beIf there are more than six arguments and no explicit referenceThe compiler detected registers that are saved and restored bydefault.the registers saved and restored. If you do not, specify those in the entry declaration.553 $)%1Uj E#DATALSTSYN, data list syntax errorler for OpenVMS Alpha;The data list in the directive contains a syntax error. For=example, the directive .LONG 3,,5 contains a data list syntax;error because there is no data item between the two commas.$Correct the syntax of the data list.66 T)S1=HINTRTN, compiler hint: 'register-list' in routine 'routine- descriptor'ler for OpenVMS Alpha:The compiler detected registers that are read before beingwritten in the routine.;Inspect the code to confirm that the registers are intended:to be input registers. If so, they can be specified in the4argument input= in the entry declaration.77))/\1Zo(MULDEFLBL, multiple definition of labeller for OpenVMS Alpha.The same label is defined twice in the module.8Delete the second label definition, or change one of the"labels to a different symbol name.88 n)g1CHINTRTN, compiler hint: Possible output registers: 'register-list') in routine 'routine-descriptor'ler for OpenVMS Alpha8The compiler detected registers that are written but not-subsequently read before exiting the routine.;Inspect the code to confirm that the registers are intended;to be output registers. If so, they can be specified in the5argument output= in the entry declaration.99f)N1\CQUADMEMREF, quadword memory references may be unaligned in routine! 'routine-descriptor'ler for OpenVMS Alpha>")_<1Sh!UNTERMARG, unterminated argumentler for OpenVMS Alpha8The string argument is missing a delimiter, or the macro%argument is missing an angle bracket.;Add a delimiter or an angle bracket to the string argument.?? )[/1QfDATINCODE, data in code streamler for OpenVMS Alpha8Data was found in the code stream. This condition is not!allowed on OpenVMS Alpha systems.:For implicit JSB parameters, pass the parameter value in a1Wl%NOTPSECOPT, not a valid PSECT optionler for OpenVMS Alpha;The attribute specified in the .PSECT directive is invalid.=Delete the invalid attribute, or replace it with a valid one.AA"&);1Wl4%UNTERMCOND, unterminated conditionaller for OpenVMS Alpha;A conditional assembly block is not terminated by the .ENDC1w@EMULTLKSEC, routines which share code must use the same linkage psectler for OpenVMS Alpha=The compiler detected a routine that shares code with another7routine but that does not use the same linkage section.=Put the routines that share code in the same linkage section.CC5)WQ1f{#4MUSTBEJSB, branch target must be declared JSB_ENTRYler for OpenVMS Alpha7The compiler detected a routine that is a branch targetwithout a JSB entry directive.9Declare the JSB entry point with either the .JSB_ENTRY orJSB32_ENTRY directive.DD:)Cc1k&9UPLEVRET, uplevel return in routine 'routine-descriptor'ler for OpenVMS Alpha:The routine is returning to an address beyond its caller'scaller.8Rewrite the routine so that it returns a status value to:its caller that indicates that the caller should return toparameters, or pass a pointer to the stack base from which thedata was read.FF/)=1`u.NOFORMLARG, no formal argument for .IRP/.IRPCler for OpenVMS AlphaThis type of overwriting static data is not allowed on OpenVMSAlpha systems.caller. Instead, pass the required data as parameters, or passt1T>FIEINALI, Field in aligned structure not naturally aligned in routine 'routine'ler for OpenVMS Alpha=An unaligned field was detected in an aligned data structure.;Align the field on a natural boundary, that is, a byte on a7byte boundary, a word on a word boundary, and so forth.OO &):1Wl%IFDIRSYNX, IF directive syntax errorler for OpenVMS Alpha9A conditional assembly directive contains a syntax error.Correct the syntax.PP ()`%1Yn'IFEXPRNABS, IF expression not absoluteler for OpenVMS Alpha=The expression in an .IF directive contains undefined symbols!or is not an absolute expression.$Change the values in the expression.QQvk)|[1-@STORCODLAB, stored code labels must be declared entry points in) routine 'routine-descriptor'ler for OpenVMS AlphaReduce the use of OpenVMS Alpha registers. To ensure that this7problem does not recur, use only OpenVMS VAX registers.VV &)U<1Wl%INSNOTSUP, instruction not supportedler for OpenVMS Alpha=The compiler detected an instruction that is not supported onOpenVMS Alpha systems.;Investigate whether you can substitute a built-in function.WWt)Y1S?VARSIZSTK, variable-sized stack update prevents accurate stack3 tracing in routine 'routine-descriptor'ler for OpenVMS Alpha:A non-compile-time constant has been applied to the stack.=This causes the generation of additional code that will lowerthe performance of the routine.6Change the stack update to a compile-time constant, if!possible, to improve performance.XX -)_<1^s,ILLABSADR, illegal absolute addressing modeler for OpenVMS AlphaRetry the assembly, or create a new copy of the input file andthen retry the assembly. ')1Xm\&CODGENWARN, 'code-generation-warning'ler for OpenVMS Alpha=The code generator detected a problem. This message indicates:an internal compiler error in all cases except one: if you>use an IPR number not supported by OpenVMS Alpha systems in an6MTPR/MFPR instruction, this warning message is issued.8Check to make sure that any IPR numbers in your code are9supported on OpenVMS Alpha systems. If all are supported,The destination of a branch instruction is not an address; forexample, BRB 10(R9).:Change the destination of the branch instruction, or use ajump (JMP) instruction. )/1LaILLCHR, illegal characterler for OpenVMS Alpha.The source line contains an illegal character.Delete the illegal character.  ()1Yn;'INSVIRMEM, insufficient virtual memoryler for OpenVMS Alpha9The module being assembled has too many symbols and macro8definitions for the virtual memory available, or a macro6definition called itself (a recursive definition). The"assembler terminated the assembly.>Have the system manager increase the virtual memory available;8reduce the level of macro nesting; split the module into9several smaller modules; or eliminate the recursive macro definition. 1F)21wCERUNTIMSTK, run time stack differences prevent accurate stack tracingler for OpenVMS Alpha8A label was found that can be reached with two different;stack depths, depending on flow path. This can produce lessefficient code.1Check stack updates for correctness on all paths. 6 ()bx1YnH'ENDWRNGMAC, statement ends wrong MACROler for OpenVMS Alpha=The name in the .ENDM directive is different from the name in#the corresponding .MACRO directive.:Correct the name in the .ENDM directive to ensure that the<.ENDM directive and .MACRO directive correspond as required. /)5m1`u.TOOMNYOPND, too many operands for instructionler for OpenVMS Alpha4Too many operands are specified for the instruction.;Specify fewer operands. Refer to VAX Architecture Reference0Manual for information on operands if necessary. &): 1Wl%TOOMNYPSEC, too many PSECTs declaredler for OpenVMS Alpha9More than 255 user-defined program sections are declared.Declare fewer program sections. 5)y 1f{4ILLDFLTARG, illegal argument for .DEFAULT directiveler for OpenVMS Alpha:A .DEFAULT directive does not specify DISPLACEMENT, or the=displacement specified is not either BYTE, WORD, or LONGWORD.Correct the .DEFAULT directive.'?)ZZ1p9>ABSPSECT, statement not supported in absolute program sectionler for OpenVMS AlphaMove any declarations that are not symbol definitions to otherprogram sections (psects). )t1NcILLEXPR, illegal expressionler for OpenVMS Alpha;A radix unary operator is not followed by a number, or left7and right angle brackets do not match in an expression.Correct the syntax.t[)F1@CCONDCAFT, condition code C expected after JSB in routine 'routine- descriptor'ler for OpenVMS Alpha8The compiler detected an attempt to communicate by means:of condition code C. The compiler does not permit implicit*communication by means of condition codes.The base mode changed the value of the register, and the index:register is the same as the register in the base mode; the!1H]ILLMODE, illegal modeler for OpenVMS Alpha=You specified an invalid addressing mode for the instruction. Specify a legal addressing mode.$$#)N91Ti"SYMNOTABS, symbol is not absoluteler for OpenVMS Alphacan be either an explicit CALL/JSB in the source code, such as="JSB subroutine", or an implicit call that occurs as a result>of another instruction. For example, some instructions such as3MOVC and EDIV generate calls to run-time libraries.3To avoid this warning, move the routine call or theThe compiler found an STx_C instruction before finding an LDx_:L instruction. This indicates an ill-formed lock sequence.>Change the code so that the STx_C instruction follows the LDx_L instruction.((lX)~1-BRETINJSB, RET in JSB_ENTRY 'routine-descriptor', with non-scratch registersler for OpenVMS Alpha:A RET instruction was detected in a JSB_ENTRY routine that>preserves registers. These registers will not be restored whentaking the RET path.The operator is not an opcode, directive, user-defined opcode,0previously defined macro, or macro in a library.>Change the operator to a valid opcode, directive, or macro; ordefine the macro.** rl)z1,2BAPTEMPUSE, AP used as a temporary register is converted to R12 in( routine 'routine-descriptor'ler for OpenVMS Alpha=Because the routine modified AP, the compiler changed any use;of AP in the routine to R12. This message is informational.None.++s0)F&1av/CHECKUSE, check instruction use (MxPR or BUGx)ler for OpenVMS Alpha7BUGx pertains to the VAX architecture, not to the Alpha architecture.%Use the EVAX-BUGCHK built-in instead.,,s!)$1Rg OPRNDSYNX, operand syntax errorler for OpenVMS Alpha#An operand contains a syntax error.Correct the syntax.--Mv7)O1h}_6CHKABSADR, absolute addressing mode should be checkedler for OpenVMS Alpha;The compiler generated code for an instruction that uses anabsolute address; for example:6 MOVL R1, @#200 ; Store value in R1 at location #200should be changed. The only code addresses that can legally beIf there are more than six arguments and no explicit referenceThe compiler detected registers that are saved and restored bydefault.the registers saved and restored. If you do not, specify those in the entry declaration.553 $)%1Uj E#DATALSTSYN, data list syntax errorler for OpenVMS Alpha;The data list in the directive contains a syntax error. For=example, the directive .LONG 3,,5 contains a data list syntax;error because there is no data item between the two commas.$Correct the syntax of the data list.66 T)S1=HINTRTN, compiler hint: 'register-list' in routine 'routine- descriptor'ler for OpenVMS Alpha:The compiler detected registers that are read before beingwritten in the routine.;Inspect the code to confirm that the registers are intended:to be input registers. If so, they can be specified in the4argument input= in the entry declaration.77))/\1Zo(MULDEFLBL, multiple definition of labeller for OpenVMS Alpha.The same label is defined twice in the module.8Delete the second label definition, or change one of the"labels to a different symbol name.88 n)g1CHINTRTN, compiler hint: Possible output registers: 'register-list') in routine 'routine-descriptor'ler for OpenVMS Alpha8The compiler detected registers that are written but not-subsequently read before exiting the routine.;Inspect the code to confirm that the registers are intended;to be output registers. If so, they can be specified in the5argument output= in the entry declaration.99f)N1\CQUADMEMREF, quadword memory references may be unaligned in routine! 'routine-descriptor'ler for OpenVMS Alpha>")_<1Sh!UNTERMARG, unterminated argumentler for OpenVMS Alpha8The string argument is missing a delimiter, or the macro%argument is missing an angle bracket.;Add a delimiter or an angle bracket to the string argument.?? )[/1QfDATINCODE, data in code streamler for OpenVMS Alpha8Data was found in the code stream. This condition is not!allowed on OpenVMS Alpha systems.:For implicit JSB parameters, pass the parameter value in a1Wl%NOTPSECOPT, not a valid PSECT optionler for OpenVMS Alpha;The attribute specified in the .PSECT directive is invalid.=Delete the invalid attribute, or replace it with a valid one.AA"&);1Wl4%UNTERMCOND, unterminated conditionaller for OpenVMS Alpha;A conditional assembly block is not terminated by the .ENDC1w@EMULTLKSEC, routines which share code must use the same linkage psectler for OpenVMS Alpha=The compiler detected a routine that shares code with another7routine but that does not use the same linkage section.=Put the routines that share code in the same linkage section.CC5)WQ1f{#4MUSTBEJSB, branch target must be declared JSB_ENTRYler for OpenVMS Alpha7The compiler detected a routine that is a branch targetwithout a JSB entry directive.9Declare the JSB entry point with either the .JSB_ENTRY orJSB32_ENTRY directive.DD:)Cc1k&9UPLEVRET, uplevel return in routine 'routine-descriptor'ler for OpenVMS Alpha:The routine is returning to an address beyond its caller'scaller.8Rewrite the routine so that it returns a status value to:its caller that indicates that the caller should return toparameters, or pass a pointer to the stack base from which thedata was read.FF/)=1`u.NOFORMLARG, no formal argument for .IRP/.IRPCler for OpenVMS AlphaThis type of overwriting static data is not allowed on OpenVMSAlpha systems.caller. Instead, pass the required data as parameters, or passt1T>FIEINALI, Field in aligned structure not naturally aligned in routine 'routine'ler for OpenVMS Alpha=An unaligned field was detected in an aligned data structure.;Align the field on a natural boundary, that is, a byte on a7byte boundary, a word on a word boundary, and so forth.OO &):1Wl%IFDIRSYNX, IF directive syntax errorler for OpenVMS Alpha9A conditional assembly directive contains a syntax error.Correct the syntax.PP ()`%1Yn'IFEXPRNABS, IF expression not absoluteler for OpenVMS Alpha=The expression in an .IF directive contains undefined symbols!or is not an absolute expression.$Change the values in the expression.QQvk)|[1-@STORCODLAB, stored code labels must be declared entry points in) routine 'routine-descriptor'ler for OpenVMS AlphaReduce the use of OpenVMS Alpha registers. To ensure that this7problem does not recur, use only OpenVMS VAX registers.VV &)U<1Wl%INSNOTSUP, instruction not supportedler for OpenVMS Alpha=The compiler detected an instruction that is not supported onOpenVMS Alpha systems.;Investigate whether you can substitute a built-in function.WWt)Y1S?VARSIZSTK, variable-sized stack update prevents accurate stack3 tracing in routine 'routine-descriptor'ler for OpenVMS Alpha:A non-compile-time constant has been applied to the stack.=This causes the generation of additional code that will lowerthe performance of the routine.6Change the stack update to a compile-time constant, if!possible, to improve performance.XX -)_<1^s,ILLABSADR, illegal absolute addressing modeler for OpenVMS Alphadelete them. (Do not move them to a different directory.) Then>reinstall the Availability Manager to put the compatible filesin the correct location.?6H^1gm5PASSLEN, password not 8 characters on line: 'string'anager6Password in the security triplet is not 8 alphanumericcharacters long.9Edit the AMDS$DRIVER_ACCESS.DAT file or the AMDS$CONSOLE_#ACCESS.DAT to correct the password.?:(1kq09RMSHUT, stopping Data Collector processing for this nodeanager;Data collection in the Data Collector is being shut down. ASupport and describe the system environment at the time of the corruption. ?T2(1=DATACOLENA, node enabled for data collection and to run Data Analyzeranager1Data collection in the Data Collector is enabled.'None. This is an informational message. ?cBW1syuAGRPTOOLNG, group name too long, truncated to 'number' charactersanagergroup name that would overflow the internal buffers. The group(name will be truncated to 16 characters.Check that AMDS$CONFIG is defined in the LNM$JOB logical name.,Check process privileges for access to file.?&-1W]%LOADSECDB, loading security databaseanager,Loading of security database was successful.None required.?(~(1Y_'LOGINTVALMAX, maximum value is 'value'anager7This secondary message is output with LOGINTVALRESET toMake sure that the SYSGEN parameter SCSNODE is set to the name of the node.?#=>1nt5ACCGPTERR, /FAO=1sk_Structure Utility>The Analyze /Disk_Structure utility encountered an error while=opening the [000000]GPT.SYS file on the volume. This error is;accompanied by the error from the $QIO System Service which*explains the cause of this access failure.The specified file is not cataloged in a directory. This error:is neither reported nor repaired if any errors occurred in-processing the directories on the volume set.;If the /CONFIRM qualifier is specified, you can catalog the/FAO=2sk_Structure Utilitythe home block indicates that the file [000000]GPT.SYS must be$present, but the file was not found.:There may be a malformed entry in the [000000]000000.DIR;19directory file that should have the name GPT.SYS;1. For a;possible corrective action, data by executing the following=commands must be collected for HP Customer Support along with;the details of how the volume was created, whether by using!INITIALIZE or BACKUP restoration:$ SHOW DEVICE /FULL -$ DUMP/DIRECTORY [000000]000000.DIR /WIDTH=80<$ DUMP/BLOCK=(COUNT=1,START=2)/WIDTH=80 [000000]INDEXF.SYS;1>$ ANAL/IMAGE/SEL=(NAME,ID,BUILD,LINK,IMAGE) SYS$SHARE:INIT$SHR?$ ANAL/IMAGE/SEL=(NAME,ID,BUILD,LINK,IMAGE) SYS$SHARE:BACKUPSHR$$?X(1=AGPTNOMAP, /FAO=1sk_Structure Utility>The [000000]GPT.SYS file is intended to map the first and last;32 blocks of a given volume, but the file header of GPT.SYS$indicates that this is not the case.7The GPT file may be a user file, named with an expected9reserved file name. If this is the case, the file must be>renamed without the .SYS file extension or with an appropriate9name; otherwise, contact HP Customer Support with details6about how the volume was initialized, whether by using=INITIALIZE or BACKUP commands, and with the data by executingthe following commands:= $ DUMP /HEADER/BLOCK=COUNT=1/WIDTH=80 [000000]GPT.SYS$ $ SHOW DEVICE /FULL %%?  '(1Xl&FREEMEM, error freeing virtual memorysk_Structure Utility:An error was encountered during an attempt to free dynamic>virtual memory. This message indicates a software error in theutility that produced it.Contact HP Customer Support.&&?d ;(/1lGv:DIRNAME, directory file 'file-spec' is not named '.DIR;1'sk_Structure Utility4The specified file is marked with the DIRECTORY file>characteristic, but it does not have a file type of .DIR and a=version number of 1. The RMS file system cannot recognize thefile as a directory..Use the DCL command RENAME to rename the file.''?\ B($1sJnABAD_INUSE, ODS-1 header has INUSE field greater than AVAIL fieldsk_Structure Utility8The value in the FH1$B_INUSE field of the file header is=greater than the value in the FM1$B_AVAIL field. This invalidThe primary index file header on the specified relative volume:is corrupted. The utility refreshes the primary index file,header from the alternate index file header.None.))?&.(1_s<-WRITEBOOT, error writing boot block, RVN 'n'sk_Structure Utility>The Analyze/Disk_Structure utility encountered an error duringthan the current date. The utility sets the backup date to the current date.None.,,? 1 T(1@FUTCREDAT, file ('file-id') 'file-name' creation date is in the futuresk_Structure Utility9The creation date recorded for the file is later than the7current date. The utility sets the creation date to the current date.None.--?2 T(1)/@FUTREVDAT, file ('file-id') 'file-name' revision date is in the futuresk_Structure Utility:The date of the last modification recorded for the file is:later than the current date. The utility sets the revisiondate to the current date.None...?52C(&1t!GBWRITEHEADER, file ('file-id') 'file-name' file header write errorsk_Structure Utility7An error was encountered during an attempt to write the>specified file header to the index file, [000000]INDEXF.SYS;1,!on the specified relative volume.:If the specified file header is currently in use, the file;can no longer be accessed by the operating system - it must;be deleted and reconstructed from backup media. If the file8header is not in use, no action is necessary because the9operating system will not attempt to use the file header.//?q3v(18RENAME, directory ('new-entry-number') 'directory-name'< error renaming directory entry ('old-entry-number')sk_Structure UtilityANALYZE/DISK/REPAIR command. A secondary message indicates thereason for the failure.7Take action based on information in the secondary error>message and retry the operation. For example, if the secondary;message is "SYSTEM-W-DUPFILENAME, duplicate file name", you=must manually rename the file that is specified in the RENAMEmessage.00?37(1h|)6WRITEHOME, error writing home block, VBN 'n', RVN 'n'sk_Structure Utility7An error was encountered during an attempt to write theWRITEIBMAP, error writing index file bitmap, VBN 'n', RVN 'n'sk_Structure Utility=An error was encountered during an attempt to write the index=file bitmap to the specified virtual block of the index file,7[000000]INDEXF.SYS;1, on the specified relative volume.;The volume probably can be mounted by the operating system,storage control block to virtual block 1 of the storage bitmap=file, [000000]BITMAP.SYS;1, on the specified relative volume.;The volume probably can be mounted by the operating system,;but the volume should either be copied to fresh media or be reconstructed from backup media.44?<<(_$1m;BAD_LBNSIZE, ODS-1 header has LBNSIZE field not equal to 3sk_Structure Utility:The value of the FM1$B_LBNSIZE field in the file header is#invalid. The only valid value is 3.#Restore the file from backup media.55?<(Y1PBMODIFY, directory 'directory-id' 'directory-name' error modifyingC symlink attribute for directory entry 'directory-entry-id'sk_Structure Utility5A system error occurred while ANALYZE/DISK/REPAIR wasAn error was encountered during an attempt to open the storagethe specified file does not agree with the UIC recorded in theprimary header.5None. The utility corrects the extension file header.99?F 7(k/1h|6GETDVI, error getting device characteristics, RVN 'n'sk_Structure Utility8An error was encountered in an attempt to get the device1characteristics of the specified relative volume..Take action based on the accompanying message.::?"IU(k/14COPENFILE, file ('file-id') 'file-name' error opening file for read checksk_Structure Utility6An error was encountered during an attempt to open the3specified file to execute the /READ_CHECK function..Take action based on the accompanying message.;;? J4(s/1ey3MODQUOTA, error modifying quota record for ['UIC']sk_Structure Utility>An error was encountered during an attempt to modify the usage3data in the quota file entry for the specified UIC..Take action based on the accompanying message.<<?MR(1#BALLOCCLR, blocks incorrectly marked allocated LBN 'n' to 'n', RVN 'n'sk_Structure Utility=The specified logical blocks on the specified relative volume8were marked allocated in the storage bitmap but were notallocated to a file.;None. The utility marks the specified blocks as free in the9storage bitmap. The /CONFIRM qualifier is ignored in this operation.==?|N](n~1DALLOCEXT, blocks allocated to lost extension file header LBN 'n' to 'n', RVN 'n'sk_Structure Utility=The specified logical blocks on the specified relative volume/were allocated to a lost extension file header.;None. The utility marks the specified blocks as free in the9storage bitmap. The /CONFIRM qualifier is ignored in thisaction.>>?EN8(-1i}W7MAPAREA, file ('file-id') 'file-name' invalid map areask_Structure Utility,The specified file has a corrupted map area.:The damage can probably be repaired by copying the file towere marked free in the storage bitmap but were allocated to afile.allocated blocks. The sort is performed in-memory and requires;virtual memory. If the utility fails to allocate the needed=virtual memory, it displays this error message and produces apartially sorted report.9If the partially sorted report is not acceptable, correct;the error and reenter the command. You may need to increase:the page file quota of the account or the SYSGEN parameter%VIRTUALPAGECNT (on VAX systems only).EE?X 0(b/1au/CREATELOST, error creating directory [SYSLOST]sk_Structure Utility8An error was encountered during an attempt to create the(directory [SYSLOST] to enter lost files..Take action based on the accompanying message.FF?X ,(Hu1]q.+DSAQUOTA, error disabling quota processingsk_Structure Utility;An error was encountered during an attempt to disable quota processing.=Take action based on the accompanying message. Use the SYSMAN6command DISKQUOTA DISABLE to disable quota processing.GG?AZ$(91UiS#OPENQUOTA, error opening QUOTA.SYSsk_Structure Utility6An error was encountered during an attempt to open the;quota file, [000000]QUOTA.SYS;1, on relative volume 1. This=condition is normal if quotas are not enforced on the volume.8If necessary, correct the error and reenter the command.HH?Z%(Y=1Vj$UNLKVOL, error unlocking volume setsk_Structure Utility8An error was encountered during an attempt to unlock thevolume set to allow allocation.None. The utility changes the backlink to point to the primary file header.KK?Jcb(}81$\?NOPRIVDIRSUM, some directories protected against access cannot! recover lost filessk_Structure Utility7During the directory scan, the utility could not read a=directory because of a privilege error (for example, the userExamine and delete the file. If possible, reconstruct the filefrom backup media.NN?e\(1D ?INVEXTHDR, file ('file-id') 'file-name' invalid extension file header sequencesk_Structure Utility:The sequence numbers in the extension file headers for the:specified file are not correct. The sequence number should,increase by 1 in each extension file header.>The link that points to the incorrect extension file header is=cleared. Part of the file cannot be accessed by the operating=system. Delete the file and, if possible, reconstruct it from backup media.OO?bg)(.1ZnFt(MAXVOLS, too many volumes in volume setsk_Structure Utility;The volume set count recorded in the home block of relative>volume 1 of an input volume set is greater than 255. Possibly,9this value has been corrupted. The Analyze/Disk_Structure"utility cannot process the volume.-Reconstruct the volume set from backup media.PP?nZ(D1mEBADNAMEFORM, file header ('file-identifier') has invalid name format fieldsk_Structure Utility;The name format field in the file header does not match theFind out which files had bad file owner fields. For each file,9correct the file owner field using the SET FILE/OWNER_UICcommand.TT?p !(;$1Rf HEADER_DEL, deleted file headersk_Structure Utility:The file header format indicates that the file is deleted.#Restore the file from backup media.UU?8w<(wR1mJ;CHKALTHOME, invalid alternate home block, VBN 'n', RVN 'n'sk_Structure Utility>The alternate home block at the specified virtual block of the7index file on the specified relative volume is corrupt.=None. The utility refreshes the alternate home block from theprimary home block.VV?wY(^$1 @INVHEADER_BUSY, invalid file header marked "busy" in index file bitmapsk_Structure Utility5The file header is corrupt, but the index file bitmap'indicates that the file header is busy.#Restore the file from backup media.WW?x:(1k9CHKPRIHOME, invalid primary home block, VBN 'n', RVN 'n'sk_Structure UtilityThe Analyze/Disk_Structure utility detected two files that areout of alphabetical order.8Do a SET FILE/NODIRECTORY on the directory file in whichAn error occurred during an attempt to assign a channel to thedevice..Take action based on the accompanying message. ~`(\1The specified extension file header is in the extension headerchain of more than one file.9The damage can be repaired by copying the volume to fresh6media, or by copying all the files to new versions and:then deleting the original versions. Examine each file for:corruption and reconstruct from backup media as necessary. ~?(cD1p+>NOREPAIR, one or more volumes write locked - /REPAIR canceledsk_Structure UtilityThe value in the FH2$B_FID_RVN field of the file header is not7the relative volume number (RVN) of the current volume.#Restore the file from backup media.~A(EY1r$@NOCMKRNL, correcting free block count requires CMKRNL privilegesk_Structure Utility9To correct the free block count, you must have the CMKRNL privilege.+Enable the CMKRNL privilege, then enter the,ANALYZE/DISK_STRUCTURE/REPAIR command again.~ \($10IDLEHEADER_BUSY, idle file header marked "busy"* no user action necessarysk_Structure Utility#The header is in a transient state.None.~;(@Y1l:NOLOGIO, erasing old home block requires LOG_IO privilegesk_Structure Utility4To erase an old home block, you must have the LOG_IO privilege.+Enable the LOG_IO privilege, then enter the,ANALYZE/DISK_STRUCTURE/REPAIR command again.~9W(2}1KASHORTBITMAP, storage bitmap on RVN 'n' does not cover the entire devicesk_Structure Utility5The storage bitmap file, [000000]BITMAP.SYS;1, on the:specified relative volume is too small for the device sizeand volume cluster factor.=This is an informational message. The volume is usable by the=file system. However, only the space described by the storage(bitmap is available for file allocation.>None. However, do not mount this volume on OpenVMS Version 7.1=or earlier systems; doing so could cause the system to crash.~e1(k1bvw0OLDHM, old home block found at LBN 'n', RVN 'n'sk_Structure Utility>The Analyze/Disk_Structure utility found a home block that was+created by a previous initialize operation.=None. The Analyze/Disk_Structure utility automatically erasesEither the backlink of the specified file does not contain the=file identification of any of the directory files in which it;is entered, or the backlink of the specified file creates a)loop in the directory backlink structure.;Use the /REPAIR qualifier to move the file to the [SYSLOST]>directory. The backlink of the file will then be set correctly"for the file's entry in [SYSLOST].~ >( $1o=FIDNUM_ZERO, file number zero but not a valid deleted headersk_Structure UtilityHowever, other fields in the file header do not contain valuesconsistent with a deleted file.#Restore the file from backup media.~jC(`1t|BSAMEDEVICE, you cannot write output to the disk you are repairingsk_Structure Utility9You used the /LIST, /OUTPUT, or /USAGE qualifier to write%output to the disk you are repairing.;Enter the command again, making sure that none of the files;specified by the /LIST, /OUTPUT, or /USAGE qualifier are onthe disk you are repairing.~J.($1_s8\-RS_LSS_AC, RSOFFSET field less than ACOFFSETsk_Structure Utility;The value in the FH2$B_RSOFFSET field of the file header is=less than the value in the FH2$B_ACOFFSET field. This invalidspecified relative volume has the wrong size, given the device9size and volume cluster factor, or is not contiguous. For8Files-11 structure level 1 volumes, the bitmap must have;the exact size needed by the device; for Files-11 structure>levels 2 and 5 the bitmap must be no larger than needed by thedevice.media. If the volume can be mounted, you can repair the damage%by copying the volume to fresh media.~  +(/1\p*ENAQUOTA, error enabling quota processingsk_Structure Utility:An error was encountered during an attempt to enable quota7processing. The utility does not reconstruct disk quota information..Take action based on the accompanying message.~ ;(E$1l:DELHEADER, file ('file-id') 'file-name' marked for deletesk_Structure Utility;The specified file is marked for deletion, but has not beendeleted.#None. The utility deletes the file.~-(1^r,READBOOT, error reading boot block, RVN 'n'sk_Structure Utility6An error was encountered during an attempt to read the7bootstrap block from virtual block 1 of the index file,7[000000]INDEXF.SYS;1, on the specified relative volume.volume probably cannot be used as a system volume for a VAX-11;processor model that requires access to the bootstrap blockduring a bootstrap operation.~( Y(x$1:@DELHEADER_BUSY, deleted file header marked "busy" in index file bitmapsk_Structure Utility;The file header indicates that the file is deleted, but the;index file bitmap indicates that the file header is in use.#Restore the file from backup media. ~M3([1dx_2READDIR, error reading directory 'directory-name'sk_Structure Utility6An error was encountered during an attempt to read the7specified directory file. The Backup utility terminatesprocessing of the directory.:Use the DCL command DIRECTORY to examine the directory andreconstruct files as necessary.!!~'($1Xl(&BAD_CHECKSUM, header checksum invalidsk_Structure Utility=The value in the FH1$W_CHECKSUM field of an ODS-1 file header;or in the FH2$W_CHECKSUM field of an ODS-2 file header doesnot match the computed value.#Restore the file from backup media.""~5>(51oG=READFILE, file ('file-id') 'file-name' error reading VBN 'n'sk_Structure Utility6An error was encountered during an attempt to read the=specified virtual block of the specified file while executingthe /READ_CHECK function.4Reconstruct the file from backup media if necessary.##~A( 1r ,@READHEADER, file ('file-id') 'file-name' file header read errorsk_Structure Utility2An error was encountered during an attempt to read.the specified file header from the index file,7[000000]INDEXF.SYS;1, on the specified relative volume.:If the specified file header is currently in use, the file=can no longer be accessed by the operating system and must be=reconstructed from backup media. If the file header is not in=use, no action is necessary because the operating system willnot attempt to use it.$$~%6(1g{)75READHOME, error reading home block, VBN 'n', RVN 'n'sk_Structure Utility;An error was encountered during an attempt to read the home9block from the specified virtual block of the index file,7[000000]INDEXF.SYS;1, on the specified relative volume.;The volume probably can be mounted by the operating system,>using one of the alternate home blocks. If the error persists,5try copying the volume to fresh media. If the /REPAIR(H1o8=READIBMAP, error reading index file bitmap, VBN 'n', RVN 'n'sk_Structure UtilityAn error was encountered during an attempt to read the storage=bitmap from the specified virtual block of the storage bitmap=file, [000000]BITMAP.SYS;1, on the specified relative volume.;The volume probably can be mounted by the operating system.>However, if the error persists, copy the volume to fresh media;or reconstruct the volume from backup media. If the /REPAIR:qualifier is specified, the utility rewrites the specifiedAn error was encountered during an attempt to read the storage>control block from virtual block 1 of the storage bitmap file,7[000000]BITMAP.SYS;1, on the specified relative volume.;The volume probably can be mounted by the operating system.>However, if the error persists, copy the volume to fresh media;or reconstruct the volume from backup media. If the /REPAIR:qualifier is specified, the utility rewrites the specifiedSCRATCH_HEADER, scratch header used by XQP Movefile operationsk_Structure Utility>The Analyze/Disk_Structure utility found a scratch file header>(a temporary file header used by Movefile). This condition can>be reported while an ANALYZE/DISK_STRUCTURE operation is being performed.6During a Movefile operation, blocks can be temporarily;allocated to more than one file header. In such cases, this=message can be accompanied by one or more MULTALLOC messages.9These messages cease when the scratch header is released.>If the message occurs while an ANALYZE/DISK_STRUCTURE/NOREPAIR9operation is being performed on a disk that is in use, noaction is required.:If the message occurs while a disk is being analyzed after7a system crash, release any scratch file headers on the:disk by performing an ANALYZE/DISK_STRUCTURE/REPAIR or SET%VOLUME/REBUILD operation on the disk.,,~S(]1@?BBLHEADER, file ('file-id') 'file-name' contains suspected bad blockssk_Structure Utility8The specified file is marked as containing suspected bad=blocks. When the file is deleted, the blocks will be verified0and returned to the bad block file if necessary.The specified directory file is not in the expected format for&a directory file. The file is corrupt.2Use the DCL command SET FILE/NODIRECTORY to delete4the corrupt directory file, then use the DCL commandthe specified directory, and then execute ANALYZE/DISK/REPAIR.22~%(p1\7:BADSYMENTRY, directory entry for 'file-spec' in directoryD 'directory-id' 'directory-name' does not match symlink& attribute in file headersk_Structure Utility;The symlink attribute of the directory entry mentioned does3not match the symlink attribute in the file header./If special files are enabled on the volume then;ANALYZE/DISK/REPAIR command will solve the problem. Special>files can be enabled on the volume using the command $ SET VOL//VOLUME_CHARACTERISTICS=SPECIAL_FILES33~d(S1ABADSYMIGNORE, symlink errors were not fixed as special files are! disabled on volumesk_Structure Utility>Symlink errors cannot be fixed if the volume has speical_filesattribute disabled.9Enable the special_file attribute of the volume using the;command $SET VOL /VOLUME_CHARACTERISTICS=SPECIAL_>FILES. Once this is done, execute ANALYZE/DISK/REPAIR to solve the problem.44~t(g1E=BADSYMVER, version limit exceeded for symlink 'file-spec' in5 directory 'directory-id' 'directory-name'sk_Structure Utility9The specified directory contains multiple versions of the>symlink file. In a directory, a symlink file cannot exist withmultiple versions.;Rename each version of the file to a unique filename in the*specified directory to solve this problem.55~kS([1"}BBADEFBLK, file ('file-id') 'file-name' inconsistent EFBLK and map areask_Structure Utility=The end-of-file pointer recorded in the RMS record attributes>for the specified file does not lie within the space allocated to the file.>None. The utility sets the end-of-file pointer to point to theend of the allocated space.66~H.($1_s6Z-AC_LSS_MP, ACOFFSET field less than MPOFFSETsk_Structure Utility8The value in the FH2$B_ACOFFSET field of the file header8is less than the value in the FH2$B_MPOFFSET field. This9indicates that the access control list of the file headerprecedes the map area.#Restore the file from backup media.77~:(1R1k9LOCKHEADER, file ('file-id') 'file-name' deaccess lockedsk_Structure Utility0The specified file is marked as deaccess locked.=If the /CONFIRM qualifier is specified, you can either unlockor delete the file.88~%1($1bv70BAD_FIDNUM, unexpected FID_NUM or FID_NMX fieldsk_Structure Utility>The value in the FH1$W_FID field of an ODS-1 file header or in>the FH2$W_FID field of an ODS-2 file header does not match thevalue used to access the file.#Restore the file from backup media.99~X&($1WkFj%BAD_FIDSEQ, unexpected FID_SEQ fieldsk_Structure Utility:The value in the FH1$W_FID_SEQ field of an ODS-1 header orallocated blocks. The sort is performed in-memory and requires;virtual memory. If the utility fails to allocate the needed=virtual memory, it displays this error message and produces apartially sorted report.9If the partially sorted report is not acceptable, correct;the error and reenter the command. You may need to increase:the page file quota of the account or the SYSGEN parameter%VIRTUALPAGECNT (on VAX systems only).EE?X 0(b/1au/CREATELOST, error creating directory [SYSLOST]sk_Structure Utility8An error was encountered during an attempt to create the(directory [SYSLOST] to enter lost files..Take action based on the accompanying message.FF?X ,(Hu1]q.+DSAQUOTA, error disabling quota processingsk_Structure Utility;An error was encountered during an attempt to disable quota processing.=Take action based on the accompanying message. Use the SYSMAN6command DISKQUOTA DISABLE to disable quota processing.GG?AZ$(91UiS#OPENQUOTA, error opening QUOTA.SYSsk_Structure Utility6An error was encountered during an attempt to open the;quota file, [000000]QUOTA.SYS;1, on relative volume 1. This=condition is normal if quotas are not enforced on the volume.8If necessary, correct the error and reenter the command.HH?Z%(Y=1Vj$UNLKVOL, error unlocking volume setsk_Structure Utility8An error was encountered during an attempt to unlock thevolume set to allow allocation.None. The utility changes the backlink to point to the primary file header.KK?Jcb(}81$\?NOPRIVDIRSUM, some directories protected against access cannot! recover lost filessk_Structure Utility7During the directory scan, the utility could not read a=directory because of a privilege error (for example, the userExamine and delete the file. If possible, reconstruct the filefrom backup media.NN?e\(1D ?INVEXTHDR, file ('file-id') 'file-name' invalid extension file header sequencesk_Structure Utility:The sequence numbers in the extension file headers for the:specified file are not correct. The sequence number should,increase by 1 in each extension file header.>The link that points to the incorrect extension file header is=cleared. Part of the file cannot be accessed by the operating=system. Delete the file and, if possible, reconstruct it from backup media.OO?bg)(.1ZnFt(MAXVOLS, too many volumes in volume setsk_Structure Utility;The volume set count recorded in the home block of relative>volume 1 of an input volume set is greater than 255. Possibly,9this value has been corrupted. The Analyze/Disk_Structure"utility cannot process the volume.-Reconstruct the volume set from backup media.PP?nZ(D1mEBADNAMEFORM, file header ('file-identifier') has invalid name format fieldsk_Structure Utility;The name format field in the file header does not match theFind out which files had bad file owner fields. For each file,9correct the file owner field using the SET FILE/OWNER_UICcommand.TT?p !(;$1Rf HEADER_DEL, deleted file headersk_Structure Utility:The file header format indicates that the file is deleted.#Restore the file from backup media.UU?8w<(wR1mJ;CHKALTHOME, invalid alternate home block, VBN 'n', RVN 'n'sk_Structure Utility>The alternate home block at the specified virtual block of the7index file on the specified relative volume is corrupt.=None. The utility refreshes the alternate home block from theprimary home block.VV?wY(^$1 @INVHEADER_BUSY, invalid file header marked "busy" in index file bitmapsk_Structure Utility5The file header is corrupt, but the index file bitmap'indicates that the file header is busy.#Restore the file from backup media.WW?x:(1k9CHKPRIHOME, invalid primary home block, VBN 'n', RVN 'n'sk_Structure UtilityOBSSERVERDB, obsolete audit server database 'n.n' encountered=An obsolete audit server database file was encountered by thepreserve the newest alarms. This event results from the server"FINAL_ACTION setting of PURGE_OLD.None.;D1uuGMCREMARCEST, remote archive link established ('n' messages 'n' lost)6The audit server established a new remote archive filefailed. The audit server will reestablish a link to the remote%node as soon as it becomes available.None. [1EREMARCNAVL, remote archive link not available; archive messages will be lost4The audit server cannot establish a link to the node;associated with the system audit archive file. This message9may be accompanied by further information on the cause of8the problem. If no further information is signaled, this9indicates that the node is not available or not accepting=remote connections. The audit server will establish a link to0the remote node as soon as it becomes available.None. BX1ssAREMARCSTS, remote archive link not available ('n' messages lost):The audit server is unable to establish a link to the node;associated with the system audit archive file. This message6follows the REMARCNAVL or REMARCFAIL error message and9is broadcast each minute indicating the number of archive>messages being lost. The audit server will establish a link to0the remote node as soon as it becomes available.None.  >t1oo=REMDISABLED, resource monitoring disabled for journal 'name'7Resource monitoring has been disabled for the specified;security audit journal file. This message is informational.None. !<t1mm;REMENABLED, resource monitoring enabled for journal 'name'8Resource monitoring has been enabled for the disk volume:associated with the specified security audit journal file.None. &%@E1qq8?REMNOTENAB, resource monitoring not enabled for journal 'name'Increase the terminal page length, if possible, and try again.>CYX1tt%BNOOPCOM, OPCOM not running at 'time'; security alarms may be lost8The audit server detects that the operator communicationmanager (OPCOM) is not running.system service that potentially prevents the audit server from0passing a message to other nodes in the cluster.;Ensure that there is sufficient disk space on all nodes for=the OPCOM process to write log files, and ensure that account;quotas are adequate for the cluster load. If this condition&persists, contact HP Customer Support.O21cc1RESCRASH, resources exhausted; server restarting>The process virtual memory allocated to the audit server (used>to buffer incoming security alarms) is exhausted. This message9indicates that the audit server final action mode was set;to RESTART and that the audit server process is restarting.7Buffered security alarms received prior to the resource8exhaustion condition are stored in the process dump file%SYS$SYSROOT:[SYSEXE]AUDIT_SERVER.DMP.None.PF{1wwxERESCRITICAL, security auditing resources exhausted on journal 'name':The free disk space on the disk volume associated with theA forced audit server restart was received by the audit server=process. The audit server process restarts. Buffered security>alarms received prior to the restart are stored in the process/dump file SYS$SYSROOT:[SYSEXE]AUDIT_SERVER.DMP.=None. This event results from the server FINAL_ACTION setting of RESTART.\eu1DSYSJNLFULL, device full error on journal SECURITY; automatic server restart suppressed4The device associated with the system security audit8journal file is full. When this occurs, the audit server:does not restart itself. Buffered security alarms received7prior to the error are stored in the process dump file,%SYS$SYSROOT:[SYSEXE]AUDIT_SERVER.DMP.8Free up space on the system volume and restart the audit;server process by using the command SET AUDIT/SERVER=START.]69d1gg5SYSJNLNAC, cannot access system audit journal 'name'>The audit server process cannot open the system security auditRESUME, system operation resumed; security auditing resources availables iDr1PDINCONSTATE, internal consistency error; please contact your Digital# support representative:An internal consistency error occurred in the audit serverprocess.6Keep the process dump file, SYS$SYSROOT:[SYSEXE]AUDIT_:SERVER.DMP, if it exists, and contact HP Customer Support.{w 61QQARCHIVEDSB, archiving disabled5Archiving is disabled. This message is informational.None.x`B1EARCHIVEMOVE, archiving ending on: 'file-name' archiving starting on: 'file-name';Archiving has been successfully redirected to a new archivefile.None. y0G1aa/ARCHIVENEW, archiving starting on: 'file-name'=Archiving to the specified archive file has been successfullyenabled.None.!! y=;r1nnArchiving cannot be enabled because the archive journal is not*directed to a file-structured disk device.>Redirect the archive journal to a file-structured disk device.##{;z!1ll:ARCOPENFAIL, archive file open failure (status: 'status');The audit server cannot open the system audit archive file.=The specified status code indicates the cause of the problem. Correct the error and try again.$$k,1]]}+JNLPUTFAIL, write to system journal failedCheck the system error logs and operator messages to determine8the source of the problem. If the error persists, pleasecontact HP Customer Support.%% 'bT1XX&DB_NAC, cannot access server database>The audit server attempted to read or write the audit server's"database, but could not access it.name for the audit server's database is SYS$MANAGER:VMS$AUDIT_;SERVER.DAT. If the audit server is to use a different file,NEWIGNORE, security auditing resources exhausted; new message ignoredpoint. This event results from the server FINAL_ACTION settingof IGNORE_NEW.None.))01aa/NEWSERVERDB, new audit server database created9A new permanent audit server database (SYS$MANAGER:AUDIT_=SERVER.DAT) has been successfully created by the audit serverprocess.None.**V{1WASUSPEND, system operation suspended; security auditing resources exhausted:The free disk space on the disk volume associated with the:specified audit journal file has fallen below the resource>action threshold. Consequently, the audit server has suspendedall noncritical processes.Security audit event listening has been disabled. This messageis informational.None.--A^1rr@LISTENENAB, event listening enabled on device 'device' ('name')7The specified device has been successfully enabled as a%security audit event listener device.None...Jd?1\ALISTENFAIL, device 'device' does not exist or is not accessible;! requestor PID: 'pid'Ensure that the device exists and allows (SYSTEM:RWLP) access.//"ju$14ELISTENNOTMBX, requested listener device ('device') is not a mailbox;# requestor PID: 'pid'8The audit server cannot associate the specified listener;device because the listener device is not a mailbox device.#Specify an existing mailbox device.00=THORIZE11111UAF, Authorize Utility11BACKUP, BACKUP/ENCRYE31vDBACNOTENC, backup set is not encrypted; ignoring /ENCRYPT qualifierPT CommandThe save set is not encrypted.2None. The save set is restored without decryption.22b6C1EDECRYPERR, error encountered in encryption facility while decrypting a backup recordPT Command5An error has occurred while decrypting save-set data.;See the accompanying message for more information about theerror.33_L>1$CENCALGNOT, specified encryption algorithm is not supported in this copy of BACKUPPT Command8You specified an unsupported encryption algorithm to thealgorithm keyword.=Re-enter the command, using a supported encryption algorithm.44a1W?ENCBSRNOT, internal error. BACKUP Summary, Record required for decryption not foundPT Command:The BACKUP Summary Record that contains the data key under:which the save set is encrypted was not found at the start9of the save set. It is possible that the save set was not encrypted.6None. The save set is probably corrupted and cannot be;restored. If the save set was in fact not encrypted, it can0be recovered by omitting the /ENCRYPT qualifier.55;@C1lv:ENCFINERR, error encountered closing an encryption streamPT Command6An error has occurred while cleaning up the encryptioncontext.;See the accompanying message for more information about theerror.66SCC1?ENCINIERR, an error was encountered initializing an encryption streamPT Command7An error has occurred while initializing the encryption operation.;See the accompanying message for more information about theerror.77wW31VAENCKEYMAT, the supplied decryption key does not yield a readable save setPT Command9The checksum on the decrypted data key and initialization>vector does not match the checksum that was stored previously.:This usually means that an incorrect key name or value hasbeen specified.2Determine the correct key to decrypt the save set.88X461DENCNOTSUP, encryption of save sets is not supported in this copy of BACKUPPT Command3This version of BACKUP does not support encryption.5Use a version of BACKUP that does support encryption.99`fhi1 r=ENCQUAIGN, encryption not supported for this copy operation;' ignoring /ENCRYPT qualifierPT Command=BACKUP supports encryption only in save sets, not in file-to-)file or volume-to-volume copy operations.8K1oy=ENCSAVSET, save set is encrypted. /ENCRYPT must be specifiedPT Command7The save set is encrypted and therefore cannot be read.6Decrypt the save set. Specify the correct key with the/ENCRYPT qualifier.<<*<*1[e)KEYLENERR, entered key value is too longPT Command;The specified key is too long for the encryption algorithm.)Re-enter the command using a shorter key.==>JA1oy=KEYNOTVER, key value not entered identically as verificationPT Command>The key values entered at the key and verification prompts are different.:Re-enter the keys, taking care to type the same value eachtime.>> ackup Utili%#{1VX{$NOSYSDISK, no access to system diskty"The system disk is not accessible.;Determine why the system disk is inaccessible. If possible,>make the system disk operational and retry the BACKUP command.??>BN1suPASYMNOTFLW, file is a SYMLINK and BACKUP does not follow the linkty7The specified file is a SYMLINK. BACKUP does not follow6SYMLINK while searching directory paths. SYMLINK filesare saved and restored as is.7Recreate the SYMLINK file on the destination disk afterthe file is restored.@@>@61qsP?BLKZERO, block 0 of 'device-name' is bad - volume not bootablety5The boot block of the specified volume is not usable.=None. However, the volume probably cannot be used as a system;volume for a VAX-11 processor model that requires access to,the boot block during a bootstrap operation.AA:1km9NOBACKUP, 'string' data not copied, file marked NOBACKUPty9A save operation was performed on a file marked NOBACKUP.6Therefore, only the file header was saved; no data wastransferred to the save set.2Either use the /BACKUP qualifier with the SET FILE9command to specify that the file be backed up, or add the6/IGNORE=NOBACKUP qualifier to the BACKUP command line.BB6j?1gi5NOBADDATA, bad block data not found on 'device-name'ty9Software bad block data is not present on the volume. The/volume has been initialized with no bad blocks.>Execute the Bad Block Locator utility before using the volume.CC:x1FLThe specified volume is not a Files-11 On-Disk Structure Level72 volume. The volume cannot be used as a save-set disk.:Retry the operation using a properly initialized structurelevel 2 volume.HH A#1rt .@BLOCKLOST, block of 'file-spec' lost due to unrecoverable errorty8The Backup utility encountered an irrecoverable error in;reading the specified save set and cannot correct the error!using the redundancy information."None. Save-set data has been lost.II 0o1ac/INVSTRUCT, invalid structure level in save setty=An incorrect value occurred in the structure level field of a0save-set block. Data in the save set is corrupt.None. Save-set data is lost.JJ -11^`,ACTIVEBCB, buffer active during reel switchty0A software error occurred in the Backup utility.Contact HP Customer Support.KKB '*1XZ*T&DIAGPACK, 'disk' is a diagnostic packty;Either a Backup utility operation attempted to use a volumeIf the error resulted from a missing or overwritten tape mark,;you might be able to recover by rewriting the tape from thedata from the last good tape mark up to or beyond the positionThe Backup utility detected an alias directory, which will not=be processed. Also, no files, subdirectories, or subdirectory+files will be processed for this directory.=None. This message advises the user not to be concerned about;files that no longer appear in the listing or journal file.SS";01ln4:INVBJLEOF, invalid end-of-file position in BACKUP journalty5The end-of-file pointer recorded for the journal file;specified by the /JOURNAL qualifier is invalid. The journal#file is corrupt and cannot be used./Reconstruct the journal file from backup media.TT 201ce1INVBJLSIZ, invalid record size in BACKUP journalty=An invalid record size occurred in the journal file specified:by the /JOURNAL qualifier. The journal file is corrupt andcannot be used./Reconstruct the journal file from backup media.UU601gi*5INVBJLSTR, invalid structure level in BACKUP journalty=The structure level recorded in the journal file specified by>the /JOURNAL qualifier is invalid. The journal file is corruptand cannot be used./Reconstruct the journal file from backup media.VV 5.=1fh4CONTINUE, unable to continue processing 'file-spec'ty;The specified file, which is being processed at a change of=save-set volumes, is no longer accessible. The Backup utilityAn incorrect value occurred in the block size field of a save-+set block. Data in the save set is corrupt.None. Save-set data is lost.]][o1M=NONCONTIG, 'file-name' is not contiguous due to insufficient contiguous spacety>The specified file was originally allocated contiguous blocks.:However, because the output volume lacked enough space forvirtual memory. This message indicates a software error in theutility that produced it.Contact HP Customer Support.__ .B1_a-NONEDEL, no files processed on deletion passty;The Backup utility did not delete any files in the deletionpass.None.``"#11TV"BUFFERSLOST, all buffers are lostty0A software error occurred in the Backup utility.Contact HP Customer Support.aa"/V1`b.NONEREC, no files processed on recording passty>The Backup utility did not update the backup date on any filesin the recording pass.None.bb1#6D1giC5BUFFQUAL, /BUFFER_COUNT qualifier obsolete - ignoredty;The Backup utility is ignoring the /BUFFER_COUNT qualifier,$6:1giP5ONEF11OUT, file-structured output must not be a listty8The output specification for a copy, restore, or compare8operation without the /IMAGE qualifier is a list of file:specifications. (The Backup utility does not accept this.)9Modify your output specification and reenter the command.ff$X/1?WRITEBACK, error writing backup date for 'device-name' file ID ('file-id')ty9The Backup utility encountered an error during an attempt9to update the backup date of the specified file. If other:file activity is occurring on the volume, the error may be;caused by another user who may have deleted the file duringthe backup procedure..Take action based on the accompanying message.x}_;IBACKUP, Backup Utili%:91kmG9ONEIMGDEV, /IMAGE input specification must not be a listty>The specification for an input volume set to be processed with;the /IMAGE qualifier is a list of file specifications. (The%Backup utility does not accept this.)8Modify your input specification and reenter the command.%4nD1eg3WRITEBLOCK, error writing block 'n' of 'file-spec'tyAn error occurred while writing the file the Backup utility istrying to restore..Take action based on the accompanying message., 9xK1jl/8DISKFRAG, free space on 'device-name' is too fragmentedty5The number of free extents on the specified volume is;unreasonably large. The volume cannot be used as a save-setdisk.;Reinitialize the volume, or select another volume and retrythe operation.3,2/1ceE1SHLVSTATE, 'file-name' has changed shelved statety8During a compare or verify operation, the Backup utility:detected that the data contents of the specified file have6been shelved and the file contents are unavailable for=verification. This condition can occur when shelving activitySpecify the /AUTOUNSHELVE qualifier on the SET PROCESS command:to change the process shelving default to autounshelve, or6disable shelving activity during the backup operation. 0C,1tvBPROCDONE, operation completed. Processing finished at 'date-time'ty+Standalone backup processing has completed.None. 0&#1WY%SHORTBLOCK, save-set block too shorttyThe output device for a restore of a physical backup is larger=than the input device. Only disk blocks up to the size of the.input device are written to the output device.9Depending on the volume structure of the input device the:unequal sizes of the devices might create an unusable disk>volume because of the extra uninitialized blocks at the end ofthe output device.8If the input device contains a Files-11, ODS-2, or ODS-5after the restore using the DCL command SET VOLUME/LIMIT/SIZE. 24y1eg3PHYDEVSM, device 'device-name' too small for inputty;The output device for a restore of a physical backup is tooUse the DCL command SHOW DEVICE/FULL or BACKUP/LIST ;to determine the total block size of the input device. Then>choose an output device of the same size or larger and try theoperation again. M2@rz1qs_?NONPHYSET, nonphysical save set supplied to physical operationty=A save set created without the /PHYSICAL qualifier is used as3input to an operation with the /PHYSICAL qualifier.>Enter the BACKUP/LIST command to determine how the save set is:created. Reevaluate the operation and reenter the command.3)g/1Z\(NOTDISM, unable to dismount 'device-id'typrocess the index file, [000000]INDEXF.SYS;1, on the specified(relative volume of the specified device..Take action based on the accompanying message.,61ue1bd>0UNEXPIRED, its expiration date is in the futurety7The Backup utility tried to mount a tape that cannot beaccompanying message provides more information about the cause:of the error. BACKUP continues the save operation, but the'output does not create a bootable disk.:Refer to the accompanying message for clues to solving the7problem. If that does not help, use the SYS$SETBOOT.EXEaccompanying message provides more information about the cause>of the error. BACKUP continues the restore operation, but doesnot create a bootable disk.6Refer to the accompanying message for clues to solving3the problem. If that does not help, you can use the7SYS$SETBOOT.EXE utility program to make the disk volume bootable.0@ VnK1B@GENMINUS1, shadow set virtual unit generation number invalid on 'device'ty>An attempt was made to use the BACKUP command on a member of a.shadow set that has not yet been fully formed.8Wait for the shadow set to be fully formed and retry thebackup operation.@%Q1VX$REPLY, operator reply is 'response'ty>This informational message displays the operator's response tothe Backup query.None.TA8@1ikf7NOOPER, no operator is available to handle the requestty6There are no operator terminals enabled to handle thisrequest.=Either service the request yourself, or abort the request. ToThe BACKUP command specified /EXACT_ORDER for label processing;and one of the following problems was detected in the label&comparison of the mounted tape volume:of the file in the standalone backup operation. If the disk is1restored, the journal commands must be reentered.None.$$MH=21np-_INVFNAME, invalid file name 'filename' from '/qualifier' filety7The file name read from the list of files is an invalidOpenVMS file format.>Edit the list of files and correct the file name. Then reenterthe BACKUP command.&&I @S1qsk?INCBADDIR, saved directory 'directory-name' has invalid formatty=In response to the /INCREMENTAL qualifier, the saved copy (inAfter the incremental restoration is complete, check the filesfor correct format.''vK6<1gi5NOIPUFILE, no input file specified with '/qualifier'ty;There was no input file specified with the named qualifier.5Reenter the BACKUP command with an input file for the:specified qualifier. For more information about the format;of the qualifier, refer to online help for BACKUP or the HP5OpenVMS System Management Utilities Reference Manual.((L8911ik7OPTALTFN, option file must have an alternate file namety8There was no alternate file name in the HSM option file.0Contact HP Customer Support to report the error.))nMCJ1tvBTOOMANIF, too many input file names, use only one input file namety>You have entered more than one input file for the /INPUT_FILES qualifier.9Enter only one input file. For more information about the>format of the /INPUT_FILES qualifier, refer to online help for>BACKUP or the HP OpenVMS System Management Utilities ReferenceManual.**M 'r/1XZ&INCDELERR, error deleting 'file-name'ty7An error is encountered during an attempt to delete the9specified file in response to the /INCREMENTAL qualifier..Take action based on the accompanying message.++N 1QSINCDELETE, deleted 'file-name'tywrite errors in the specified save set the specified number of'times by rewriting the blocks in error.9None. However, if the number of errors appears excessive,5consider retiring the save-set media when convenient.22KR+H1\^]*ALLOCMEM, error allocating virtual memoryty7An error occurred during an attempt to allocate dynamicvirtual memory.8Take action based on the accompanying message. It may be7necessary to increase either the page file quota of the5account or, on VAX systems only, the SYSGEN parameterVIRTUALPAGECNT.33:R1P1bdL0CANTEXPREG, cannot expand virtual address spacety8Standalone BACKUP attempted unsuccessfully to expand itsvirtual address space.2If this error can be reliably reproduced, note the9circumstances under which it occurs, including the BACKUP*command used. Contact HP Customer Support.44R3&71df2INVDEVTYP, invalid backup device type 'file-spec'ty%The specified device type is invalid.6Reenter the command, specifying a disk or tape device.55RS $1>MOUNTERR, volume 'volume' on 'device' was not mounted because 'reason'ty;The Backup utility was unable to mount the specified volume!for one of the following reasons:=o The expiration date specified in the volume label is in the: future. That is, the data on the volume has not expired.8o The volume label does not match the one requested. The= label specified in the BACKUP command (either explicitly or5 implicitly) does not match the label on the volume.8o The volume is protected against access. The protection8 specified in the volume header disallows access by the% person entering the BACKUP command.;At this point, the Backup utility allows you to either quit>the operation, overwrite the volume label and continue, or put;a new volume in the drive and continue processing. To abort prompt.:To overwrite information in the volume header and continue>processing, enter the OVERWRITE command at the BACKUP> prompt.9To restart the operation with a new volume, enter the NEW prompt. If the QUIT or NEW command is>chosen, the Backup utility automatically dismounts the volume.66S]G 1CCANTLOCK, cannot lock pages into memory; reboot if the system disk goes off linety9Standalone BACKUP cannot lock the required pages into the working set.=Normally, no action is necessary. However, if the system disk9goes off line, it will be necessary to reboot the system.create a directory entry for the specified file in response tothe /INCREMENTAL qualifier.*Correct the error and reenter the command.88T0 1ac/MOUNTF11, 'file-spec' must be mounted Files-11tydevices have been specified and that the /SAVE_SET, /PHYSICAL,>and /IMAGE qualifiers are properly used. Then, if appropriate,>mount the specified volume without the /FOREIGN qualifier, andreenter the command.99 UbL>1ECOMPALGNOT, specified compression algorithm is not supported in this copy of BACKUPtyRetry the backup operation, using the volume that contains the(beginning of the selected file as input.;;U-1^`,MOUNTFOR, 'device' must be mounted /FOREIGNty4The specified volume is mounted without the /FOREIGNdevices have been specified and that the /SAVE_SET, /PHYSICAL,>and /IMAGE qualifiers are properly used. Then, if appropriate,;mount the specified volume with the /FOREIGN qualifier, andreenter the command.<<U.:I1_a-OPENOUT, error opening 'file-name' as outputty9The Backup utility cannot open the specified output file.=Determine why the file cannot be opened and repeat the backup operation.==VcC1LNNOTREPAIRED, not repairedty=BACKUP is not able to open the specified saveset file. Hence,$not able to repair the saveset file.;See the accompanying message for more information about theerror.>> V Bu11suAINCFILSPE, /INCREMENTAL specification must have only device nametyVMS$COMMON.DIR and this incorrect back link for VMS$COMMON.DIRhas been repaired.None.CCZ ,1]_+CREDIR, created directory 'directory-name'ty5The Backup utility successfully created the directory7'directory'. This message is displayed only if the /LOGqualifier is specified.None.DDZ41egS*3MAXBAD, bad block table overflow for 'device-name'tycommand INITIALIZE cannot initialize the volume, or the Backup9utility cannot process the volume. This message generally5indicates that the disk volume can no longer be used.:Check the status of the device and reenter the command. If:the failure persists, reformat the disk. Notify the system;manager. If the failure still persists and the disk pack is$under warranty, return it to Compaq.EE[@O1qs?REPAIRED, saveset attributes changed to RFM=FIX, specified MRSty=BACKUP saveset attribute RFM is changed to FIX and MRS to thespecified value.None.FF[ 6]/1gi5CREDIRERR, error creating directory 'directory-name'tyThis informational message displays the operator's response to=a query from the Backup utility after the operator aborted orcanceled a request.None.JJT^b:1,f,OPERFAIL, error requesting operator servicety`ZpS1PBIGNSIZEQUAL, the logical volume size exceeds the physical size of the diskty>Specified logical volume size exceeds the physical size of the0disk. Hence, BACKUP ignores the /SIZE qualifier.7Retry the BACKUP with logical volume size less than thephysical size of the disk.OOra5O1fh4LOWPGFLQUOTA, PGFLQUOTA should be greater than 8192ty:Specified PGFLQUOTA quota value for BACKUP process is lessthan 8192 pagelets.:PGFLQUOTA quota value for BACKUP process should be greater8than 8192 pagelets. Modify the PGFLQUOTA quota value for:BACKUP process as specified in HP OpenVMS System Manager'sManual, Volume 1: Essentials.PPa1k11bd0NOTJOURNAL, 'file-spec' is not a BACKUP journalty5The specified file does not have the appropriate file4attributes; it is not a Backup utility journal file.0Locate the correct file and reenter the command.QQa&pF1WY%OPERSPEC, specify option ('options')ty;This message is returned to the operator. It indicates that3the Backup utility encountered a recoverable error.9The operator must select one of the options listed in the=message. The options listed depend upon the recoverable error;that was encountered. Possible options are: QUIT, CONTINUE,6RESTART, NEW, OVERWRITE and USE. If the QUIT option isthe Backup utility will restart the operation at the beginning9of the current volume. If the NEW option is selected, the8Backup utility will dismount the current tape volume and;request that a new tape volume be mounted. If the OVERWRITE9option is selected, the Backup utility will overwrite the=currently loaded volume label. If the USE option is selected,>the Backup utility will use the currently loaded volume label.RRbF61wy.ELOGIONOPRIV, LOG_IO privilege required for physical backup operationty9For physical BACKUP operation, process must have the LOG_9IO privilege. The BACKUP process does not have the LOG_IO privilege.5Modify the BACKUP process privilege and retry BACKUP.SSb*U1[])RESUME, resuming operation on volume 'n'ty>The Backup utility is continuing an operation on the specifiedvolume of a save set.None.TTc5@1fh4MAXFILES, Maximum files allowed on DISK is modifiedty5Maximum files allowed on the specified disk have been modified.None.UU}cFp1wyEXORERRS, 'n' errors recovered by redundancy group in 'save-set-spec'tyEvent flags are exhausted and are not available for displaying>the CTRL-T output on to the screen. Hence, BACKUP has disabled the CTRL-T.None.XXeO179BADOPTDSC, invalid callable interface option descriptor,@ argument position 'position', option type = 'option-9 type', descriptor = 'descriptor' 'descriptor'ty=An invalid or zero-length string descriptor was specified foran option value.8Note the values found and their relative position in thespecified option value. (Refer to the BACKUP documentation and:the BACKUP API definitions files for valid option values.);Nh7.1hj2`6MAXVOLS, too many volumes in volume set 'device-name'ty;The volume set count recorded in the home block of relative>volume 1 of an input volume set is greater than 255. Possibly,8this value has been corrupted. The Backup utility cannotprocess the volume.-Reconstruct the volume set from backup media.;i`KC1!ECOMPERR, error encountered in compression facility while compressing a backup recordty2An inconsistency has occurred while compressing ordecompressing the data.;See the accompanying message for more information about theerror.;iE11%5BADOPTVALQ, invalid callable interface option value,A argument position 'position', option type = 'option-@ type', option value = 'option-value' 'option-value'ty;An invalid option quadword value was detected in the set ofoptions.specified option value. (Refer to the BACKUP documentation and:the BACKUP API definitions files for valid option values.);Ai:b1kmS9INVFILEXT, invalid file extension linkage in 'file-spec'ty7The specified save-set file has an invalid pointer to a;following segment of the file. The remainder of the file isnot accessible.=Attempt to recover data by beginning a restore operation with#the first unprocessed file segment.;i=pF1np&*SPECIFY, specify option ('valid-options') BACKUP>ty;This message is returned to the operator. It indicates that3the Backup utility encountered a recoverable error.9The operator must select one of the options listed in the=message. The options listed depend upon the recoverable error;that was encountered. Possible options are: QUIT, CONTINUE,6RESTART, NEW, OVERWRITE and USE. If the QUIT option isthe Backup utility will restart the operation at the beginning9of the current volume. If the NEW option is selected, the8Backup utility will dismount the current tape volume and;request that a new tape volume be mounted. If the OVERWRITE9option is selected, the Backup utility will overwrite the=currently loaded volume label. If the USE option is selected,>the Backup utility will use the currently loaded volume label.;j #{!1TV"HDRCRC, software header CRC errorty3An incorrect value occurred in the header CRC field:(BBH$W_CHECKSUM) of a save-set block. Data in the save set is corrupt. None. The save-set data is lost.; j/@|1`b.OPRABORT, operator has aborted backup requestty8The operator selected the ABORT option when prompted forinput.8The backup operation has been aborted. You might want to;restart the backup operation, because all data has not beensaved. ;bjKB1|~2t%SPECLBL, the label was not specified$ specify label (up to 6 characters)ty5This message can occur when no operator assistance is=specified. Exact label checking is in effect, but the command7line did not specify enough labels to cover the currentvolume.7Specify a volume label to be used in exact volume order checking. ;m TY19INCONQUALS, qualifier '/qualifier' contradicts qualifier '/qualifier'ty8The two specified qualifiers conflict and cannot be usedtogether in the BACKUP command.3Reenter the BACKUP command with only one of the twoThis /LOG message indicates that a file header only is copied.9The file is marked NOBACKUP; therefore, no data is saved.None. ;=r)1Z\IO(CREATEDAS, created 'file-1' as 'file-2'ty:This message is output for every file that is successfully6converted from ODS-5 to ODS-2 format. This message may6occur when the BACKUP command qualifiers /NOINITIALIZE8and /IGNORE=STRUCTURE are specified for an image restore operation.None.;t >1oq =FACTBAD, cannot read factory bad block data on 'device-name'ty7Either the Backup utility or the DCL command INITIALIZEc;INCRVN, incorrect relative volume mounted on 'device-name'ty:Either the wrong volume of a multivolume disk save-set wasINCSETCNT, incorrect number of devices in input specificationty9The number of devices in the input specification does not;agree with the volume set count recorded on relative volume1.7Reenter the command with the correct number of devices.;|1+ARESTERR, error restoring alias file entry( 'dev:[directory]entry.alias',9 the primary file entry was 'dev:[prim_dir]primary.file'ty=An error occurred when the Backup utility tried to restore an=alias file entry. The alias file entry was not restored. Note>that in most cases the alias file entry is eliminated from the directory.the data in this error message and any secondary error status,=correct the problem and create the alias file entry using theDCL command SET FILE/ENTER.=As a general practice, Compaq recommends that you execute the;DCL command ANALYZE/DISK after Backup restore operations of:all save sets have been completed and any subsequent error=corrections have been made, for example, using SET FILE/ENTER commands.; C1tv0$BINDEXTOSM, index file is too small on output device 'device-name'tyc1oq=SSATEOV, this save-set was started in the end-of-tape regionty>The current save set was started in the end-of-tape region. No#data was written, only ANSI labels.None.;Y71hjk6SSCHANGE, unexpected end of save set on 'device-name'ty:Internal consistency checks have detected that the current;save set has ended, and the Backup utility is reading a new save set.:You will be prompted to continue or quit. If you choose to:continue, the Backup utility will continue reading the new save set.;Sj1CBADQUAL, qualifier '/qualifier' is inconsistent with the operation typety>The specified qualifier cannot be used with the type of Backup*operation indicated by the BACKUP command.:Reenter the BACKUP command without the specified qualifier=or select a different operation type. For more information onthe problem and retry the backup operation. Otherwise, contactHP Customer Support.;7 |18IEDUPOPT, previously specified callable interface option type invalid,B argument position 'position', option type = 'option-type'ty8An option type is specified more than once in the set ofReevaluate the command to ensure that the obtained results arecorrect.;l*^1[]~)MULTREAD, error reading file 'file-name'ty;The Backup utility cannot read the specified file. Multiple!attempts to read the file failed.;Determine why the file cannot be read and repeat the backup operation.7If the input disk is a disk served by Distributed Files6Services (DFS), check for problems with the DFS server connection. ;yAB1/BBADREPLY, unknown type of operator reply; reply is 'message-type'5 'message-status' 'reply-id' 'message-text'ty5The operator's reply is an unknown type and cannot be processed.8See the operator or your system manager to determine theproblem.!!;?y1pr>QUOTAFILE, quota file is too small - use DISKQUOTA to rebuildty2During a restore or copy operation with the /IMAGE8qualifier, the Backup utility found that the quota file,6[000000]QUOTA.SYS;1, on the output volume is not largeenough.8After the restore or copy operation is complete, use the9SYSMAN command DISKQUOTA REBUILD to reconstruct the quotafile."";*V1[])STARTDELETE, starting file deletion passty>The Backup utility is beginning to delete files in response tothe /DELETE qualifier.None.##;21ce1STARTRECORD, starting backup date recording passtyIf the /SINCE=BACKUP or /BEFORE=BACKUP qualifier is used, note>that data will be lost if the operation is restarted using the>same output media. If it is necessary to restart the operation0because of a system failure, use another volume.$$; @4.1qs?IDENT, Standalone BACKUP 'string'; the date is 'date and time'ty3This is a standalone backup identification message.-Make sure that the displayed data is correct.%%;wf1AODS5CONV, structure level 5 files will be converted to structure# level 2 on 'device-name'ty5This informational message is output at the beginning7of an ODS-5 to ODS-2 conversion in BACKUP. This message7occurs when the BACKUP command qualifiers /NOINITIALIZE8and /IGNORE=STRUCTURE are specified for an image restore operation.None.&&;)1Z\(STARTVERIFY, starting verification passty9The Backup utility completed the operation on the current9volume and is beginning to verify data in response to the/VERIFY qualifier.None.'';Y^1BODS5LOSS, conversion may result in loss of structure level 5 file attributesty8This informational message is output at the beginning of8an ODS-5 to ODS-2 conversion in BACKUP. ODS-5 attributes6will be lost during the conversion and ODS-5 filenames8will be converted to valid ODS-2 filenames. This message7occurs when the BACKUP command qualifiers /NOINITIALIZE8and /IGNORE=STRUCTURE are specified for an image restore operation.None.((;6X11gi5NOTSAVESET, 'save-set-spec' is not a BACKUP save setty5The specified file does not have the appropriate file!attributes; it is not a save set.0Locate the correct file and reenter the command.));Qc`m1cBSTASMALLMEM, small memory system. Booted device must stay on line during operation.ty7The amount of system memory is too small to lock all of'standalone backup into the working set.:Ensure that the device from which standalone backup booted1stays on line during the entire backup operation.**;-{21^` ,CLOSEIN, error closing 'file-name' as inputtyThe Backup utility is writing journal records to the specified;file in response to the /JOURNAL qualifier. This message is2displayed only if the /LOG qualifier is specified.None.,,;@|1qs7?BADSETCNT, incorrect number of devices in output specificationty8The output specification for a copy, restore, or compare=operation with the /IMAGE qualifier must be a list containing:the same number of devices as the number of volumes in theinput volume set.>If the input is a save set, use the DCL command BACKUP/LIST toallocate the minimum number of buffers required to perform thebackup operation.8The system manager should ensure that the SYSGEN and UAF:parameters for all accounts that perform backup operations are at the recommended settings.00;Zj1BRCTNOPRIV, LOG_IO privilege required to read disk RCT - operation continuingty;The Backup utility cannot read bad block data from the disk-because you do not have the LOG_IO privilege.;The backup operation finishes, but bad block information isthe backup operation after enabling or acquiring the necessary privilege.11;< 1mo;RCTUNRSZR, RCT unreadable, output SERIALNUM field set to 0ty=The disk's Replacement and Caching Table was unreadable. As a=result, the output volume serial number is set to 0, and datais lost.Reformat of replace the volume.22; 11bd0FIDERROR, unexpected file change in 'file-spec'ty:A file boundary marker is missing from the input save set.DELETE, error deleting 'file-name' file ID ('numeric-string')ty7An error is encountered during an attempt to delete the:file with the specified file identification in response to8the /DELETE qualifier. The accompanying message providesadditional information.None.77;4G1eg3RSTRTDIS, restart disabled for this backup sessionty9The save set being written was started in the end-of-tape=(EOT) region of the previous tape. No data was written on theIn a copy or restore operation with the /PHYSICAL qualifier, a=bad block is present on the output volume in a location where>;8w/1ik7READBAD, error reading bad block data on 'device-name'ty1df K2READBLOCK, error reading block 'n' of 'file-spec'ty9The Backup utility encountered an error during an attempt6to read the specified block of the specified file. The5accompanying message provides additional information.=Examine the file for corruption and reconstruct as necessary.@@;xDq1uwCNOSLS, qualifier '/qualifier' is invalid when SLS is not installedty=The command line contains a qualifier specific to the StorageThe Backup utility was processing a file that cannot be mappedbecause of insufficient quotas.8The system manager should ensure that the SYSGEN and UAF:parameters for all accounts that perform backup operations are at the recommended settings.FF;$'G1UW~#READERR, error reading 'file-name'ty&Backup cannot read the specified file.;Determine why the file cannot be read and repeat the backup operation.GG;<m1mo;VBNMISSING, 'file-spec' has missing blocks 'n' through 'n'tythe input save set although they follow the end-of-file block.&Data in the save set may be corrupted.=Examine the file for corruption and reconstruct as necessary.command does not provide a device specification (or the device>specification is syntactically incorrect) and the input device=is the user's default device. In this case, the output device:defaults to the current default device (the input device).0Check the command line to ensure that the device;specifications are syntactically correct and that no device>appears (explicitly or implicitly) more than once. Reenter theBACKUP command.RR;I CZ1tv[BFILNOPOST, file will not be subject to date-recording or deletionty;This warning message indicates that the Backup utility will7not post-process the file because its contents were notsuccessfully verified.=Determine why the file could not be successfully verified andretry the backup operation.SS;!=>1np3READJNLACE, error reading journal ACE for 'file-spec' file ID 'file-id'ty9The Backup utility cannot read the journal access control#entry (ACE) for the specified file.=Determine if the access control list (ACL) cannot be written.>This could be due to a corrupted ACL or some other hardware or=software related error. Correct the problem, if possible, andretry the backup operation.WW;0w1ac/ABORT, operator requested abort on fatal errorty>In response to a BACKUP-I-SPECIFY prompt, the user or operator7entered the QUIT option; the Backup utility terminated.None.XX;3n\1df02SAVSETCLU, save-set disk cluster factor must be 1tymust contain a file name. The following list elements, if any, must contain only a device name.8Reenter the command, with the save-set name in the firstelement of the list.z%zBACKUP, Backup Utili`1HDNOVOLDATA, volume summary data for 'device-name' not found - /IMAGE cannot be usedty;In a restore operation with the /IMAGE qualifier, no volume:initialization data exists. Either the save set is created=without the /IMAGE qualifier, or save-set data has been lost.8Attempt to recover data without the /IMAGE qualifier. If9this error occurs during a disk-to-disk (copy) operation,occurred when the save set was created. Data in this block may be corrupt.5Examine the file for corruption and reconstruct it asinput file. If other file activity is occurring on the volume,;the error may result because another user modified the fileduring the backup procedure.5None; however, note that the copies are inconsistent.z V_J12BREADVERR, virtual read error on file 'file-name' at block 'block- number'ty:The Backup utility received an error while reading a block#associated with the specified file.>Determine why the file could not be read and repeat the backup operation.z 1QSCOMPARED, compared 'file-spec'ty>The Backup utility successfully completed a compare operation.>This message is displayed only when the /LOG command qualifieris used.None.z8`1ik7NEXTVOL, volume 'volume' mounted - operation continuestyThe specified directory file is not in the expected format for&a directory file. The file is corrupt.2Use the DCL command SET FILE/NODIRECTORY to delete4the corrupt directory file, then use the DCL commandNone. However, the saved copy of the file may be inconsistent.z-K31^`,LISINPSAV, /LIST requires save set as inputty>The input specification for a listing operation must reference a save set.2Correct the specification and reenter the command.z9e\1jl-8VOLINSET, 'device-name' is already part of a volume setty:The specified volume is already bound to a volume set. The)volume cannot be used as a save-set disk.9Retry the operation using a properly initialized Files-11!On-Disk Structure Level 2 volume.zDcmS1VDRECORDSWL, 'device-name' is write protected - backup date recording pass not executedty=The input device is software write-locked. The Backup utility.cannot perform the backup data recording pass.>Dismount the input device, remount it as writable, and reenterthe BACKUP command.z7r'1hj6VOLLABERR, its label does not match the one requestedty=The Backup utility tried to mount a tape whose label does not3match the ones specified with the /LABEL qualifier.&Mount the tape with the correct label.z Yf,1DNOSUCHRVN, /VOLUME = 'number' invalid, volume set contains 'number' volumestyk1oq=PHYDEVGEO, device type of 'device-name' does not match inputty8In an operation with the /PHYSICAL qualifier, the output1device must be the same type as the input device.the command line. The loaded volume is not the expected volume5according to the order specified in the command line.=Examine the volume labels and their order as specified in the:command line. The user or the operator must respond to the=prompt to specify what action to take to complete this backup operation.z?1pre>PHYFILSPE, /PHYSICAL specification must have only device namety:When the /PHYSICAL command qualifier was used, more than a:device name was specified as an input-specifier or output->specifier. The file specification for a volume to be processed=with the /PHYSICAL qualifier must contain only a device name.=Refer to the HP OpenVMS System Management Utilities Reference=Manual for information on the /PHYSICAL command qualifier andreenter the command.z_=}1npqused as input to an operation without specifying the /PHYSICAL qualifier.=Use the DCL command BACKUP/LIST to determine how the save set>is created. Reevaluate the operation, and reenter the command.zV13AVOLUSED, volume with label 'label' was already used in this save operationtyEither a required parameter was not specified or the specified/parameter pointed to an invalid set of options.:Note the argument passed to the BACKUP API and examine the=set of options for correctness; then specify an argument that9points to a non-zero set of options. (Refer to the BACKUPThe specified qualifier cannot be used with the type of Backup*operation indicated by the BACKUP command.:Reenter the BACKUP command without the specified qualifier=or select a different operation type. For more information onthe problem and retry the backup operation. Otherwise, contactHP Customer Support.;7 |18IEDUPOPT, previously specified callable interface option type invalid,B argument position 'position', option type = 'option-type'ty8An option type is specified more than once in the set ofReevaluate the command to ensure that the obtained results arecorrect.;l*^1[]~)MULTREAD, error reading file 'file-name'ty;The Backup utility cannot read the specified file. Multiple!attempts to read the file failed.;Determine why the file cannot be read and repeat the backup operation.7If the input disk is a disk served by Distributed Files6Services (DFS), check for problems with the DFS server connection. ;yAB1/BBADREPLY, unknown type of operator reply; reply is 'message-type'5 'message-status' 'reply-id' 'message-text'ty5The operator's reply is an unknown type and cannot be processed.8See the operator or your system manager to determine theproblem.!!;?y1pr>QUOTAFILE, quota file is too small - use DISKQUOTA to rebuildty2During a restore or copy operation with the /IMAGE8qualifier, the Backup utility found that the quota file,6[000000]QUOTA.SYS;1, on the output volume is not largeenough.8After the restore or copy operation is complete, use the9SYSMAN command DISKQUOTA REBUILD to reconstruct the quotafile."";*V1[])STARTDELETE, starting file deletion passty>The Backup utility is beginning to delete files in response tothe /DELETE qualifier.None.##;21ce1STARTRECORD, starting backup date recording passtyIf the /SINCE=BACKUP or /BEFORE=BACKUP qualifier is used, note>that data will be lost if the operation is restarted using the>same output media. If it is necessary to restart the operation0because of a system failure, use another volume.$$; @4.1qs?IDENT, Standalone BACKUP 'string'; the date is 'date and time'ty3This is a standalone backup identification message.-Make sure that the displayed data is correct.%%;wf1AODS5CONV, structure level 5 files will be converted to structure# level 2 on 'device-name'ty5This informational message is output at the beginning7of an ODS-5 to ODS-2 conversion in BACKUP. This message7occurs when the BACKUP command qualifiers /NOINITIALIZE8and /IGNORE=STRUCTURE are specified for an image restore operation.None.&&;)1Z\(STARTVERIFY, starting verification passty9The Backup utility completed the operation on the current9volume and is beginning to verify data in response to the/VERIFY qualifier.None.'';Y^1BODS5LOSS, conversion may result in loss of structure level 5 file attributesty8This informational message is output at the beginning of8an ODS-5 to ODS-2 conversion in BACKUP. ODS-5 attributes6will be lost during the conversion and ODS-5 filenames8will be converted to valid ODS-2 filenames. This message7occurs when the BACKUP command qualifiers /NOINITIALIZE8and /IGNORE=STRUCTURE are specified for an image restore operation.None.((;6X11gi5NOTSAVESET, 'save-set-spec' is not a BACKUP save setty5The specified file does not have the appropriate file!attributes; it is not a save set.0Locate the correct file and reenter the command.));Qc`m1cBSTASMALLMEM, small memory system. Booted device must stay on line during operation.ty7The amount of system memory is too small to lock all of'standalone backup into the working set.:Ensure that the device from which standalone backup booted1stays on line during the entire backup operation.**;-{21^` ,CLOSEIN, error closing 'file-name' as inputtyThe Backup utility is writing journal records to the specified;file in response to the /JOURNAL qualifier. This message is2displayed only if the /LOG qualifier is specified.None.,,;@|1qs7?BADSETCNT, incorrect number of devices in output specificationty8The output specification for a copy, restore, or compare=operation with the /IMAGE qualifier must be a list containing:the same number of devices as the number of volumes in theinput volume set.>If the input is a save set, use the DCL command BACKUP/LIST toallocate the minimum number of buffers required to perform thebackup operation.8The system manager should ensure that the SYSGEN and UAF:parameters for all accounts that perform backup operations are at the recommended settings.00;Zj1BRCTNOPRIV, LOG_IO privilege required to read disk RCT - operation continuingty;The Backup utility cannot read bad block data from the disk-because you do not have the LOG_IO privilege.;The backup operation finishes, but bad block information isthe backup operation after enabling or acquiring the necessary privilege.11;< 1mo;RCTUNRSZR, RCT unreadable, output SERIALNUM field set to 0ty=The disk's Replacement and Caching Table was unreadable. As a=result, the output volume serial number is set to 0, and datais lost.Reformat of replace the volume.22; 11bd0FIDERROR, unexpected file change in 'file-spec'ty:A file boundary marker is missing from the input save set.DELETE, error deleting 'file-name' file ID ('numeric-string')ty7An error is encountered during an attempt to delete the:file with the specified file identification in response to8the /DELETE qualifier. The accompanying message providesadditional information.None.77;4G1eg3RSTRTDIS, restart disabled for this backup sessionty9The save set being written was started in the end-of-tape=(EOT) region of the previous tape. No data was written on theIn a copy or restore operation with the /PHYSICAL qualifier, a=bad block is present on the output volume in a location where>;8w/1ik7READBAD, error reading bad block data on 'device-name'ty1df K2READBLOCK, error reading block 'n' of 'file-spec'ty9The Backup utility encountered an error during an attempt6to read the specified block of the specified file. The5accompanying message provides additional information.=Examine the file for corruption and reconstruct as necessary.@@;xDq1uwCNOSLS, qualifier '/qualifier' is invalid when SLS is not installedty=The command line contains a qualifier specific to the StorageThe Backup utility was processing a file that cannot be mappedbecause of insufficient quotas.8The system manager should ensure that the SYSGEN and UAF:parameters for all accounts that perform backup operations are at the recommended settings.FF;$'G1UW~#READERR, error reading 'file-name'ty&Backup cannot read the specified file.;Determine why the file cannot be read and repeat the backup operation.GG;<m1mo;VBNMISSING, 'file-spec' has missing blocks 'n' through 'n'tythe input save set although they follow the end-of-file block.&Data in the save set may be corrupted.=Examine the file for corruption and reconstruct as necessary.command does not provide a device specification (or the device>specification is syntactically incorrect) and the input device=is the user's default device. In this case, the output device:defaults to the current default device (the input device).0Check the command line to ensure that the device;specifications are syntactically correct and that no device>appears (explicitly or implicitly) more than once. Reenter theBACKUP command.RR;I CZ1tv[BFILNOPOST, file will not be subject to date-recording or deletionty;This warning message indicates that the Backup utility will7not post-process the file because its contents were notsuccessfully verified.=Determine why the file could not be successfully verified andretry the backup operation.SS;!=>1np3READJNLACE, error reading journal ACE for 'file-spec' file ID 'file-id'ty9The Backup utility cannot read the journal access control#entry (ACE) for the specified file.=Determine if the access control list (ACL) cannot be written.>This could be due to a corrupted ACL or some other hardware or=software related error. Correct the problem, if possible, andretry the backup operation.WW;0w1ac/ABORT, operator requested abort on fatal errorty>In response to a BACKUP-I-SPECIFY prompt, the user or operator7entered the QUIT option; the Backup utility terminated.None.XX;3n\1df02SAVSETCLU, save-set disk cluster factor must be 1tymust contain a file name. The following list elements, if any, must contain only a device name.8Reenter the command, with the save-set name in the firstelement of the list.|CBAD, Bad Block Locat B}1s}ADEVRCT, unable to analyze 'device-name', due to revector cachingor Utility:The device controller is capable of revectoring bad blocks7dynamically; hence, the device will always appear to be flawless.Do not analyze the media.U4d1(@INVALQUAL, the 'qualifier-name' is an invalid qualifier in this contextor Utility3The specified qualifier is invalid in this context.0Consult the documentation for the list of valid,2nonconflicting qualifier specifications and usage.A1r| @NOBADINFO, no bad block information available for 'device-name'or Utility9A device that is not a last-track device does not contain8a bad block file. The utility will create a new SDBSF innonlast-track format.None.7s/1DLSTTOTBK, device 'device-name' contains a total of 'number' blocks;- 'number' defective blocks detectedor Utility.This message details the number of bad blocks.None.BR31;IVBLKENT, invalid or missing bad block specifier in string "'string'"or Utility2The specified block contains an invalid character.Correct the value.CgP1@IVBLKNUM, 'string' is an invalid block number, 'position' value% 'nnnnnnnn' is out of rangeor Utility=The specified block number is invalid due to the value in the'position' field.Correct the value.G >R01oy=GETDVI, error obtaining device information for 'device-name'or Utility3An error was encountered while attempting to obtaininformation about the device./Take action based on the accompanying messages.I:6F1ku9ALIGNDISK, 'device-name' contains an alignment cartridgeor Utility5The specified device contains an alignment cartridge.and displays the portion of the command line that is in error.The duplicate block is ignored.None.  *=U1[e)FAO, error formatting report informationor UtilityAn error occurred during an attempt to assign a channel to thedevice..Take action based on the accompanying message.21cm1BBFOVF, bad block file overflow on 'device-name'or Utility8During the analysis of the media, the SDBSF became full.:Possibly a large number of bad blocks was specified to the1/BAD_BLOCKS qualifier or the media is unreliable.7Reenter the ANALYZE/MEDIA command with fewer bad blocksFor example, this could occur if you update the bad block file=without exercising the media, and the device is write-locked./Take action based on the accompanying messages.`;X1.DSDBSFRFAIL, failed to read the software detected bad sector file on 'device-name'or Utility:The Bad Block Locator utility cannot locate a valid SDBSF.context that causes the Bad Block Locator utility to re-create"the SDBSF; for example, /EXERCISE.  6x51gq5DEVNOTBLK, 'device' is not a block structured deviceor UtilityMount the device using the /FOREIGN qualifier and reinvoke theutility.F#[1wEBLK0BAD, block 0 is bad, do not use 'device-name' as a system deviceor Utility"Block 0 is defective on the media.;Do not use the media as a system device, because block 0 isused to contain the bootstrap.^<1BMDBSFCRUPT, manufacturer's detected bad sector file is corrupt on 'device-name'or Utility;The header information in the redundant MDBSF is corrupted.Have the media inspected.d.1EMDBSFRFAIL, failed to read the manufacturer detected bad sector file on 'device-name'or Utility:This error can occur as the result of any of the followingreasons:13BADFORKIPL, bad FORK exit interrupt priority levelcheckis no longer appropriate to continue to send messages for each>error, and error reporting is suppressed. The system continuesto attempt to write the dump.7When the system reboots, copy the dump to another file.9Determine the text associated with the hexadecimal statusto 1), the OpenVMS operating system needs to remap portions ofattempted the write operation. The system continues to attemptto write the dump.8When the OpenVMS operating system reboots, copy the dump7to another file. Determine the text associated with the:hexadecimal status by using the /STATUS qualifier with the:DCL command HELP/MESSAGE or by using the F$MESSAGE lexical=function or an equivalent. If the status indicates a possible6disk problem, see the user action for the accompanyingmessage.## /1`e9,.NOBUFPCKT, required buffer packet not presentcheck13UNABLCREVA, unable to create virtual address spacecheckset to 0). The dump cannot be used because analysis depends on>the system page table, which is kept in the uppermost physical=pages of memory (that is, the last data to be written if thisstyle of dump is written).9If there is room on the volume that holds the system dump=file, expand the dump file. If space is limited, try to write:a selective dump. Refer to the HP OpenVMS System Manager's"Manual for the correct procedures.((,1]b6)+INVTQEFMT, invalid time queue entry formatcheckDocument and report any events that occurred on other nodes in=the cluster that also have the shadow set mounted. Reboot the.node that crashed and remount all shadow sets.22! 21ch</1FREEPAGREF, free page reference count is nonzerocheck@DISKCLASS, fatal error detected by Disk Class driver (DUDRIVER)checkbuffers. The system allocates space for error log entries from>a set of common buffers. System software that makes use of the;error logging routines typically writes into these entries.:This message occurs when an attempt to write into an error=log entry has overwritten other parts of the system error log>buffers. The most common cause of this error is a coding errorwithin a device driver.:Use the BACKUP command with the /IGNORE=NOBACKUP qualifier;to make a backup save set of the system dump file generated;by this error. Contact HP Customer Support and describe the conditions leading to the error.==6%1V[/"$SHRCNTNEG, PFN share count negativecheck>8 -1^c7*,GBLPAGSZRO, Global page share count is zerocheckmust contain a file name. The following list elements, if any, must contain only a device name.8Reenter the command, with the save-set name in the firstelement of the list.G}<7@BUGCHECK, System Bug=A1rwK>@BADLCKWSLE, bad locked working set list entry, not a page tablecheck"1SX,!NOTFCPWCB, Not FCP window in IRPcheckautomatically reboots if the BUGREBOOT system parameter is setto 1.=Use the BACKUP command with the /IGNORE=NOBACKUP qualifier to13DOUBLDALOC, double deallocation of swap file spacecheck13GPGNULPGFL, global page has null page file addresscheck13PTELENVIOL, unexpected page table length violationcheck13WSSIZEERR, working set size less than pages in usecheckcondition. After all of physical memory is written to a systemKeep a copy of the crash dump and contact HP Customer Support.00t/1`e9,.APTWRTERR, active page table swap write errorcheck@TAPECLASS, fatal error detected by Tape Class driver (TUDRIVER)check not 0checkThe OpenVMS software detected an irrecoverable hardware error.7Because of the severity of the error, further operation6is impossible or it could corrupt user data. After allautomatically reboots if the BUGREBOOT system parameter is setto 1.>Thoroughly test all system hardware components. If no hardware8errors are located and if the problem persists, note the;conditions at the time of the error. Use the BACKUP command=with the /IGNORE=NOBACKUP qualifier to make a backup save setwriting out the system and global page tables. The page tablesallows a single copy of each global page to exist in the dump.that initiated the bugcheck, special system processes, currentautomatically reboots if the BUGREBOOT system parameter is setto 1.1otH;=RSBREFNZRO, tried to deallocate RSB with non-zero ref. countcheckKeep a copy of the crash dump and contact HP Customer Support.''7 1PU)NOTUCBUCB, corrupted UCB listcheck13BADSWPVBN, swap VBN specified for non-process pagecheck1otH;=NOSHMGSD, No shared memory global section dsc found for pagecheck13PGFLOCBAD, pagefault, location field has bad valuecheck1otH;=NOSHMGSD, No shared memory global section dsc found for pagecheckCONFIGURATION SET CLUSTER_AUTHORIZATION command at the SYSMAN>prompt.a-'DR1^q,NOPRIV, operation requires SYSPRV privilegezation File Service8Access to the cluster authorization file requires SYSPRV privilege.:Enter a SET PROFILE/PRIVILEGE=SYSPRV command, then reenteryour original command."T'WE14ANEEDBOTH, no authorization file - need both a password and group numberzation File Service=The CONFIGURATION SET CLUSTER_AUTHORIZATION command specifiesan invalid group number.=Reenter the command with a numeric group number between 1 and65535.']+1K^INVPWD, invalid passwordzation File Service9A cluster password contains characters other than A to Z,"0 to 9, $, hyphen, and underscore.*Reenter the command with a valid password.;';+1l:INVPWDLEN, invalid password length - password not changedzation File Service:A cluster password is null or has more than 31 characters.*Reenter the command with a valid password.1;'A1lC:INVRFM, invalid record format - file must be FIXED lengthzation File Service8The file SYS$SYSTEM:CLUSTER_AUTHORIZE.DAT has an invalidformat.;Delete and re-create the file on all cluster members with a>CONFIGURATION SET CLUSTER_AUTHORIZATION command at the SYSMAN>prompt.DA, Compound DocumeY4#Z1et3AGGCNT, Aggregate type: 'type' Agg count: 'number'nt Architecture6This informational message lists the number of missing"aggregates for the specified type.None.Z&#L+1Wf%ALLOCFAIL, memory allocation failurent Architecture;The standard memory allocation procedure failed to allocatedynamic memory.*Increase your process quotas if necessary. [#$|1KZ~CLOSEFAIL, close failurent Architecture#The standard close function failed.9Check whether all input files are present and ensure that:there is sufficient space and access rights for all outputfiles. e\'#/1Xgw&DCVNOTFND, domain converter not foundnt Architecture.The required domain converter cannot be found.>Only tabular-to-document domain conversions (for example, DTIF=to DDIF) are currently supported. Check the formats specified8for input and output files to ensure that a document-to-*tabular conversion is not being attempted. ]"#o1Sb!DEFAULT, item present by defaultnt Architecture=The application's call to CDA$LOCATE_ITEM determined that the0item was present by default in the input stream.None. ^!#M1Ra DEFNOTFOU, definition not foundnt Architecture:The application's call to CDA$FIND_DEFINITION refers to anundefined entity.Contact HP Customer Support. _#R1DSEMPTY, empty itemnt Architecture=The application's call to a CDA access procedure refers to anitem that is empty.Contact HP Customer Support.`#f1L[ENDOFDOC, end of documentnt Architecture>The application's call to CDA$GET_AGGREGATE determined that no&more aggregates exist in the document.None.a#^1L[ENDOFSEQ, end of sequencent Architecture9The application's call to CDA$NEXT_AGGREGATE refers to an#aggregate at the end of a sequence.Contact HP Customer Support.bW#H$1@ERRINPLOG, error messages produced during input conversion, see error lognt Architecture=The input conversion did not complete and error messages were produced.#Refer to the error log for details.cX#I$1AERROUTLOG, error messages produced during output conversion, see error lognt Architecture>The output conversion did not complete and error messages were produced.#Refer to the error log for details.d)#d1Zi(FILESPEC, Missing filespec: 'file-spec'nt ArchitectureThe specified file is missing.1Check related error messages; check the names and1accessibility of relevant input and output files.e##X21Tc"FLTTRN, floating-point truncationnt Architecture9Floating truncation occurred during CDA$LOCATE_ITEM for ageneral floating-point value.1None. You encountered a CDA implementation limit.f&#/)1Wf%ICVNOTFND, input converter not foundnt Architecture.The specified input converter cannot be found.=Check the format specified for the input file for errors. SeeITEM refers to an aggregate that is already part of a sequence4but that is not the first aggregate in the sequence.Contact HP Customer Support.$$v#]1O^INVITMCOD, invalid item codent Architecture=The application's call to a CDA access procedure refers to anundefined aggregate item code.Contact HP Customer Support.%%w#1O^INVITMLST, invalid item listnt Architecture;The application's call to CDA$OPEN_FILE or CDA$CREATE_ROOT_=AGGREGATE has a processing options item list that contains an invalid item.Contact HP Customer Support.&&x!#DF1Ra INVOPTVAL, invalid option valuent Architecture8A specified processing option value is not valid for the converter.=Refer to the Using the CDA Converters manual for valid optionvalues.''y"#f1Sb!INVOUTDMN, invalid output domainnt Architecture=An invalid output domain was specified for the back end. Only'DDIF and DTIF are supported as domains.Specify a valid domain.((z#1P_INVSCOCOD, invalid scope codent Architecturethat has a special tag encoding, but the value of the add_info¶meter is not defined for the item.=Check for mismatched versions of the CDA components installedCheck the format specified for the output file for errors. SeeThe application's call to CDA$CONVERT determined that the back=end suspended conversion. This message is returned by the CDAviewer.Contact HP Customer Support.55+#0z1\k*TYPEREF, Undefined type name: 'type-name'nt Architecture/No definition was found for the specified type.;Check for possible mismatched DDIF versions or corrupt DDIF=input. If no problems are found, contact HP Customer Support.66,#1]l+UNRECENC, unrecognized encoding(s) skippednt Architecturetype, but the item that specifies the data type has an invalidvalue.Contact HP Customer Support.::#-1N]VERSKEW, major version skewnt Architecture=The toolkit cannot properly process the data because the DDIF9version number in the input file differs from the toolkitversion number.,Install the correct version of the software.;;#$P1JY}WRITFAIL, write failurent Architecture#The standard write function failed.=Check whether you have sufficient space and access rights forall output files.<<EU, Command Definit 5cq1fqE4CONFNOPARM, NOPARAMETERS has already been specifiedion Utility>CDU encountered a PARAMETER clause after a NOPARAMETERS clause#in a single verb/syntax definition.;Make sure each verb/syntax definition in the .CLD file does4not contain both NOPARAMETERS and PARAMETER clauses.==3 5cq1fqE4CONFNOQUAL, NOQUALIFIERS has already been specifiedion Utility>CDU encountered a QUALIFIER clause after a NOQUALIFIERS clause#in the same verb/syntax definition.;Make sure each verb/syntax definition in the .CLD file does4not contain both NOQUALIFIERS and QUALIFIER clauses.>>"1MXvSYMTOOLNG, string too longion UtilityA command string is too long.!Reenter a shorter command string.?? 1Qf1bm$0CONFOUTPUTS, only one OUTPUTS clause is allowedion Utility8CDU encountered more than one OUTPUTS clause in a singleverb/syntax definition.;Make sure each verb/syntax definition in the .CLD file does)not contain more than one OUTPUTS clause.@@. 0cq1al@/CONFPARM, a parameter has already been definedion Utility>CDU encountered a NOPARAMETERS clause after a PARAMETER clause#in a single verb/syntax definition.;Make sure each verb/syntax definition in the .CLD file does4not contain both PARAMETER and NOPARAMETERS clauses.AA. 0cq1al@/CONFQUAL, a qualifier has already been definedion Utility>CDU encountered a NOQUALIFIERS clause after a QUALIFIER clause#in a single verb/syntax definition.;Make sure each verb/syntax definition in the .CLD file does4not contain both QUALIFIER and NOQUALIFIERS clauses.BB- :Zo1kv?9CONFROUTIMG, only one routine or image clause is allowedion Utility:CDU encountered more than one IMAGE or ROUTINE clause in asingle verb/syntax definition.;Make sure each verb/syntax definition in the .CLD file does2not contain more than one IMAGE or ROUTINE clause.CC3\>1do 2INVTYPE, built-in type 'type-name' is not definedion Utility;CDU encountered an invalid keyword in a built-in definitionwhile reading from a .CLD file.=Make sure all built-in keywords in the .CLD file are defined.DD a9I1CUNDEFOUTPUT, line 'line-number': Output parameter/qualifier 'name' is not definedion Utility8CDU encountered an undefined OUTPUT parameter/qualifier.;Make sure all OUTPUT parameters/qualifiers in the .CLD file are defined.EE0I91al/INVVALCLAUSE, invalid value clause encounteredion Utility=CDU encountered an invalid VALUE keyword while reading from a .CLD file.8Make sure all VALUE keywords in the .CLD file are valid.FFFEH1wEUNDEFSYNTAX, line 'line-number': Syntax 'syntax-name' is not definedion Utility8CDU encountered an undefined syntax name during a SYNTAX assignment.CDU encountered a DEFINE statement in which there is already adefinition with the same name.1`k.DUPIDENT, only one IDENT statement is allowedion Utility8There is more than one IDENT statement in the .CLD file.=Make sure there is only one IDENT statement in the .CLD file.QQX 9I1ju!j8DUPKEY, keyword 'keyword-name' has already been definedion Utility8CDU encountered a KEYWORD definition that conflicts with:an existing KEYWORD definition with the same name. KEYWORD7definitions in the same TYPE definition must be unique.=Make sure each KEYWORD definition in the same TYPE definition is unique.RRTQ@1!AINVITEM, invalid item 'item-name' encountered. Some text will be skippedion Utility>CDU encountered (and ignored) an unexpected item while readingfrom a .CLD file.7Make sure all commands in the .CLD file contain correctsyntax.SS ,Wg1]h&+DUPLABEL, only one LABEL clause is allowedion Utility6CDU encountered more than one LABEL clause in a singlequalifier/parameter definition.>Make sure each qualifier/parameter definition in the .CLD file'contains no more than one LABEL clause.TT 1E?1bm0DUPMODULE, only one MODULE statement is allowedion Utility>More than one MODULE statement is encountered in a single .CLDfile.>Make sure there is only one MODULE statement in the .CLD file.UU>1oz =CLIMISMATCH, CLI type of image does not match /CLI qualifierion Utility8You tried to use the SET COMMAND/CLI=CLI-type command to:modify command tables created by a CLI type other than theone you have specified.None.VV  0Qa1al/DUPPLACE, only one PLACEMENT clause is allowedion Utility:CDU encountered more than one PLACEMENT clause in a singlequalifier definition.=Make sure each qualifier definition in the .CLD file contains"no more than one PLACEMENT clause.WW  .Pe1_j-DUPPREFIX, only one PREFIX clause is allowedion Utility7CDU encountered more than one PREFIX clause in a singleverb/syntax definition.;Make sure each verb/syntax definition in the .CLD file does(not contain more than one PREFIX clause.XX  .Nc1_j-DUPPROMPT, only one PROMPT clause is allowedion Utility7CDU encountered more than one PROMPT clause in a singleparameter definition.=Make sure each parameter definition in the .CLD file does not$contain more than one PROMPT clause.YY >Sa1oz.=DUPQUAL, qualifier 'qualifier-name' has already been definedion Utility:CDU encountered a previously defined qualifier in a singleverb/syntax definition.8Make sure all qualifiers defined in a single verb/syntax'definition in the .CLD file are unique.ZZ .Qh1_j#-DUPSYNTAX, only one SYNTAX clause is allowedion Utility0CDU encountered more than one SYNTAX clause in aqualifier/parameter definition.>Make sure each qualifier/parameter definition in the .CLD file(contains no more than one SYNTAX clause.[[ *HX1[f)DUPTYPE, only one TYPE clause is allowedion Utility;CDU encountered more than one TYPE clause in a single value definition.Make sure each qualifier/parameter definition in the .CLD file(contains no more than one SYNTAX clause.]]:dTX1L?ROUTREQ, line 'line-number': A ROUTINE clause is required when# generating an object fileion Utility:CDU did not encounter a ROUTINE clause while attempting togenerate an object file.;Make sure the .CLD file contains a ROUTINE clause if objectfile generation is desired.^^- fLQ1??DEFAULTLEN, a default is limited to 'max-length' characters in% length, including commasion Utility9A DEFAULT assignment in the .CLD file exceeds the maximumallowable length.Include the name of the input tables in the command string. If=there are no .CLD files, do not specify the /TABLES qualifierin the command string.bb#gk1T_1"BADVALUE, illegal qualifier valueion Utility7Either the qualifier value in the command string or the.qualifier value in the .CLD file is incorrect.=Either enter a valid qualifier value in the command string or,modify the qualifier value in the .CLD file.cc:C`1kv9INVPLACE, placement must be GLOBAL, LOCAL, or POSITIONALion Utility7An invalid keyword value is specified for the PLACEMENT qualifier.:Make sure each PLACEMENT keyword value in the .CLD file is$either GLOBAL, LOCAL, or POSITIONAL.dd>EF1oz=PATHAMBIG, line 'line-number': Path 'path-name' is ambiguousion Utility>CDU encountered a DISALLOW clause that references an ambiguouspath.:Make sure no DISALLOW path references in the .CLD file are ambiguous.ee`:@1DPATHUNDEF, line 'line-number': Path 'path-name' refers to undefined verb or syntaxion Utility9A DISALLOW clause references an undefined verb or syntax.6Make sure all DISALLOW references in the .CLD file aredefined.ffD0@1uCPATHUNRES, line 'line-number': Path 'path-name' cannot be resolvedion Utility/A DISALLOW clause references an undefined path.6Make sure all DISALLOW references in the .CLD file aredefined.gg}'&1Xc&SUCCESS, normal successful completionion Utility%The operation completed successfully.None.hh C361tBINTHCHAR, internal error: encountered character of class h-stringion Utility2CDU encountered a corrupt internal data structure.5Retain the .CLD file and contact HP Customer Support.ii 6361gr5INTINVNODE, internal error: invalid node encounteredion Utility2CDU encountered a corrupt internal data structure.5Retain the .CLD file and contact HP Customer Support.jj8a^O1JEINVREQPARM, line 'line-number': All required parameters must precede optional onesion Utility;CDU encountered a required parameter specification after an!optional parameter was specified.>Specify all required parameters before any optional parametersin the command.kk 461ep3INTNODESPACE, internal error: node space exhaustedion UtilityCDU exhausted internal memory.5Retain the .CLD file and contact HP Customer Support.ll 361do2INTPATHSTKOV, internal error: path stack overflowion UtilityCDU exhausted internal memory.5Retain the .CLD file and contact HP Customer Support.mmfp15AINVROUT, line 'line-number': A ROUTINE clause is valid only when# generating an object fileion Utility:CDU encountered a ROUTINE clause and was not generating an>object file. The ROUTINE clause is valid only when object filegeneration is requested.;Edit the .CLD file to remove the ROUTINE clause, or specify3the /OBJECT qualifier with the SET COMMAND command.nn41kn1bmF0CONFCON, CONCATENATE has already been specifiedion Utility9CDU encountered a NOCONCATENATE clause after processing a0CONCATENATE clause in the same value definition.9Make sure each value definition in the .CLD file does not3contain both CONCATENATE and NOCONCATENATE clauses.oo)<Wl1mx;;CONFDEFREQ, only one DEFAULT or REQUIRED clause is allowedion Utility=CDU encountered more than one DEFAULT or REQUIRED clause in asingle value definition.9Make sure each value definition in the .CLD file does not1contain more than one DEFAULT or REQUIRED clause.pp17ao1hsC6CONFDIS, a DISALLOW clause has already been specifiedion UtilityThe verb you tried to delete is not defined in the current CLItable.3Check your syntax and try to delete the verb again.rr /_h1`k2.CONFNEG, NEGATABLE has already been specifiedion Utility>CDU encountered a NONNEGATABLE clause after a NEGATABLE clausein the same keyword definition.>Make sure each keyword definition in the .CLD does not contain(both NEGATABLE and NONNEGATABLE clauses.ss-5`n1fq?4CONFNOCON, NOCONCATENATE has already been specifiedion Utility:CDU encountered a CONCATENATE clause after a NOCONCATENATE$clause in the same value definition.9Make sure each value definition in the .CLD file does not3contain both CONCATENATE and NOCONCATENATE clauses.ttZ'1OZNOMODS, no modification madeion Utility=The process tables were not modified because there is no .CLDfile in the command string.&Add a .CLD file to the command string.uu-3ao1do?2CONFNODIS, NODISALLOWS has already been specifiedion UtilityCDU encountered a NEGATABLE clause after a NONNEGATABLE clausein the same keyword definition.;Make sure each keyword definition in the .CLD file does not0contain both NEGATABLE and NONNEGATABLE clauses.wwJLI, Command LanguagC'61tIBSYMTOOLNG, symbol 'symbol-name' is too long to copy to subprocesse Interpreter (DCL)>When a subprocess is spawned, a logical name, a logical value,too large to be fully displayed. The value is truncated in thedisplay.None.r9Support and describe the conditions leading to the error.rror.he following list elements, if any, must contain only a device name.8Reenter the command, with the save-set name in the firstelement of the list.}[3ECLI, Command LanguagW'>j1CCNULLPIPE, null pipe segment found; please specify the missing pipe segmente Interpreter (DCL)=An expected pipe segment command was not found in a pipeline.:Either add the missing pipe segment commands or remove the.extraneous pipe segment command separator (|). ,'1]p+REFUSED, you cannot attach to that processe Interpreter (DCL)parameter, or a list of input values separated by commas for aportions of a UIC must be specified within square brackets [ ]!and must be separated by a comma. Correct and reenter the command.  Q'1) in the specified parameter.;Note that this error can occur if a physical device name is;specified without a colon following it. This error can also;occur with VAX VMS Version 4.4 or higher if you use Version<3.7 syntax to specify a concealed device (for example, using)DUA0: instead of /TRANSLATION_CONCEALED).>Examine the directory name (or logical name, if a logical name;is specified). Correct the directory syntax and reenter thecommand.T'P1DAOLDTAB, command tables have obsolete format - use SET COMMAND to recreatee Interpreter (DCL)=CLI encountered a command table with an obsolete format whileThe command action for an ON command in a command procedure is6too complex to be evaluated or too large to be stored.Correct the ON command action. 4'1ex 3PRESENT, entity value is present in command stringe Interpreter (DCL)6This status, returned by the CLI$PRESENT CLI interface:routine, indicates that the specified entity is explicitlypresent in the command line.None. ,"D'1u%>CNOCMDPROC, error opening captive command procedure - access deniede Interpreter (DCL);When you attempted to log in, you failed because you have a;captive account and DCL received an error during the login.8For example, DCL could not find your LOGIN.COM file. You:may also have incorrect protection on the system's SYLOGIN;file (SYS$MANAGER:SYLOGIN.COM or /SYSTEM/EXEC logical). The=system's SYLOGIN file must be protected with at least WORLD:E6access to the file and the directory that contains it.See your system manager. }$>'|1o=UNDFIL, file has not been opened by DCL - check logical namee Interpreter (DCL)9A DCL command READ, WRITE, or CLOSE specified a file that7is not currently opened or for which no logical name is assigned.use the DCL command OPEN to open the file before attempting toread or write to it. 7%F'~A1wIEBUFOVF, command buffer overflow - shorten expression or command linee Interpreter (DCL)9A command string, including continuation lines, is longer:than the buffer used by the command interpreter to store acommand.7Shorten and reenter the command, or enter more than onecommand.%-'1^q,UNDKEY, 'state' key 'key-name' is undefinede Interpreter (DCL)9An attempt was made to use the SHOW/KEY or the DELETE/KEY=command to show or delete the definition of a key that is notdefined.None.&R'91g>INVCALL, invalid CALL nesting structure or data inconsistency detectede Interpreter (DCL)+Possible causes for this error message are:9o SUBROUTINE and ENDSUBROUTINE commands are mismatched or" unpaired in a command procedure.:o The GOSUB command was used with a label defined with the SUBROUTINE command.The number of pipe segment commands caused DCL to overflow itsinternal buffers.8Break the pipeline up into several shorter pipelines and'execute them in separate PIPE commands.* T'c1?FRZNCTX, context is frozen - either cancel this context or use alternatee Interpreter (DCL)changed after it has been referenced by an appropriate lexical7function other than F$CONTEXT, which requires a contextsymbol.>Use another symbol, or use the cancel function of F$CONTEXT to#erase the context from this symbol. *8'lJ1i|27NOTCTX, symbol specified is not a valid context symbole Interpreter (DCL)>An attempt is being made to use a symbol that has a type other,than a context type such as PROCESS_CONTEXT.:Refer to the documentation of the lexical function you aretrying to use.*='g!1n Either there is a null subshell or a subshell command sequence;lacks the separators necessary to distinguish it from othercommand sequences.0Remove or correct the offending subshell syntax.1S'1k?NOTDISCON, terminal is not disconnectable - explicitly specify LOGOUTe Interpreter (DCL):An attempt has been made to disconnect a terminal that has:not been set as disconnectable from the current process. A;disconnect under these circumstances would log out the user!and, therefore, is not permitted.1Either explicitly log out, or set the terminal as=disconnectable by using the SET TERMINAL/PERMANENT/DISCONNECTcommand and try again.2 ,'0#1]p+IMAGEFNF, image file not found 'file-name'e Interpreter (DCL)/An attempt was made to run a nonexistent image."Check for typing errors and retry.5 A'_1r@GBLNDF, cannot define symbol - global symbol scoping is enablede Interpreter (DCL)8An attempt is being made to define a global symbol after3using the SET SYMBOL/SCOPE=NOGLOBAL command. Global:symbols cannot be accessed or defined while symbol scoping6is set to NOGLOBAL. This can be reset by using the SETSYMBOL/SCOPE=GLOBAL command.>Check your command procedure. Either change the symbol scopingto GLOBAL or use local symbols.7A'^1r@ONLEVL, invalid ON context - use only within command procedurese Interpreter (DCL)Check that the source program has specified a transfer address5and, if necessary, reassemble and relink the program.##F)'8k1Zm(REQPRMABS, required parameter is absente Interpreter (DCL)7A required qualifier for a DCL command was not entered.specified and when the SPAWN command is executed from within anoninteractive process.Do not use /NOTIFY.++{L '#1QdALLOC, 'device-name' allocatede Interpreter (DCL)"The specified device is allocated.None.,,]LE'U1voDIVFNAM, invalid lexical function name - check validity and spellinge Interpreter (DCL);A command contains the character string F$name() where nameis not a valid function.8Verify the spelling of the lexical function. Use the DCL:command HELP or refer to the HP OpenVMS DCL Dictionary fora list of lexical functions.--P:'!1k~"9NOPAREN, value improperly delimited - supply parenthesise Interpreter (DCL):A value supplied as part of a parenthesized value list for:a parameter, qualifier, or keyword is missing a delimiting parenthesis. Correct and reenter the command...T?'&&1p>IVKEYNAM, unrecognized key name - check validity and spellinge Interpreter (DCL)%A key name was specified incorrectly.%Correct the spelling of the key name.//TU<'a1mf;IVKEYW, unrecognized keyword - check validity and spellinge Interpreter (DCL)>A keyword specified in a command is not valid for the command.8The rejected portion of the command is displayed between backslashes.7Use the DCL command HELP or refer to the HP OpenVMS DCL(Dictionary for a list of valid keywords.00Z)'M1Zm(SPAWNED, process 'process-name' spawnede Interpreter (DCL)>This message is output by the DCL command SPAWN when it spawns a subprocess.None.11[ B'M01sAEXPSYN, invalid expression syntax - check operators and operandse Interpreter (DCL)>An arithmetic expression in a DCL command is not syntactically3correct; the command interpreter cannot analyze the;expression. An invalid expression can occur as a result of:2o Missing operators between values or symbol nameso Unmatched parentheses6o Undefined symbol names that are being interpreted as character string data/Correct the expression and reenter the command.22l[ C'i1t~BGOSUBMAX, GOSUB procedures too deeply nested - limit to 16 levelse Interpreter (DCL)Interactive access (access to the $ prompt) is not allowed forcaptive accounts.8There is an error in the captive login command procedure=that has been established for this account, causing it to endnot a recognized operator. The rejected portion of the command!is displayed between backslashes.;Correct the command. Enter the DCL command HELP EXPRESSIONS=for a list of valid operators, or refer to the HP OpenVMS DCL Dictionary.66#a!'Q1Re5 IVPROT, invalid protection codee Interpreter (DCL)A command contained more than the maximum number of parameters%allowed. This error can be caused by:'r1o=IVQLOC, invalid qualifier location - place after a parametere Interpreter (DCL)>A qualifier that can be used only to qualify a parameter value2in a command is placed following the command name.6Reenter the command; place the qualifier following the:parameter value it actually qualifies. Use the DCL command;HELP or refer to the HP OpenVMS DCL Dictionary to determine+the meaning and placement of the qualifier.<<eS'R1?IVQUAL, unrecognized qualifier - check validity, spelling, and placemente Interpreter (DCL)>lB'!!1sAINVFILSPE, input or output file specification too long - shortene Interpreter (DCL) A file specification is invalid. Correct and reenter the command.??LnP'bh1^PWDNOTVAL, old password validation error - password unchangede Interpreter (DCL)=The password was not changed because the password you entered=for validation does not match the account's current password.The password was not changed because the password you typed atThe CREATE/NAME_TABLE/ATTRIBUTES=SUPERSEDE command cannot find=an existing table of the same name. The new table is created.None.EEr:'1k~69IVVALU, invalid value syntax - see command documentatione Interpreter (DCL);A value for a command qualifier is not specified correctly,5or a command is not being used in its proper context.8The rejected portion of the command is displayed between backslashes.=Correct the command. Use the DCL command HELP or refer to the;HP OpenVMS DCL Dictionary to determine the proper syntax oruse of the command.FFr$'/p1Uh#PWDSYNTAX, illegal password syntaxe Interpreter (DCL).A password was entered using incorrect syntax.;Enter a password using 1 to 31 alphanumeric characters, the3dollar sign ($), or the underscore (_) characters.GGr;'1l:TABSUPER, previous table 'table-name' has been supersedede Interpreter (DCL);The CREATE/NAME_TABLE/ATTRIBUTES=SUPERSEDE command found anAn executing command procedure was interrupted by a Ctrl/Y and=is still active. The READ command is trying to read data from=this interrupted command procedure, which has no read access.=To read data from the terminal, repeat the READ command using;SYS$COMMAND as the input file. The STOP command can also be=used to deactivate the interrupted command procedure, and the5READ command can be repeated as originally specified.QQ;'Y1l:ATTACHED, terminal now attached to process 'process-name'e Interpreter (DCL)>This message is output by the DCL command ATTACH or SPAWN whenit attaches to a process.None.RRt;'~1l:NOFORCMD, account restricted - foreign commands not valide Interpreter (DCL):Foreign commands have been disabled for this account. (See7the OpenVMS User's Manual for an explanation of foreign commands.)>This account requires that all images are run by verbs defined;in the CLI table (these are called DCLTABLES) specified for this account.SS,+'fi1\o>*INVLOGFIL, invalid log file specificatione Interpreter (DCL)7The log file specification is syntactically invalid for-reasons specified in an accompanying message.Make sure that the CALL statement in your command procedure isroutine, indicates that the specified entity is not explicitly7present in the command line, but is present by default.None.WW/'|!1`s.TKNOVF, command element is too long - shortene Interpreter (DCL)>An element (that is, any string placed between two delimiters)'n1o,=OVRFLW, too much data - modify size of field or size of datae Interpreter (DCL);A data value is larger than the area defined to receive it;;for example, a DCL command, DEPOSIT, requested that a value1larger than 1 byte be deposited in a 1-byte area.>Verify the value and the area to receive it; correct the value.or the receiving area and reenter the command.YY 1'1bu0DEFKEY, 'state' key 'key-name' has been definede Interpreter (DCL)The specified key is defined.None.ZZ?'1p">NORUNMCR, account restricted - RUN and MCR commands not valide Interpreter (DCL);The RUN and MCR commands are foreign commands and have been=disabled for this account. (See the OpenVMS User's Manual for$an explanation of foreign commands.)9This account requires that all images are run using verbs>defined in the CLI table (called DCLTABLES) specified for thisaccount.ist.3I=r3CLI, Command Languag @'@@1q?DEFOVF, too many command procedure parameters - limit to eighte Interpreter (DCL)3A command procedure is invoked with more than eight parameters.3Reenter the command; do not specify more than eight parameters.3,C'nI1t>BSTKOVF, command procedures too deeply nested - limit to 32 levelse Interpreter (DCL)5The maximum level of nesting of command procedures is7exceeded. Too many procedures invoked other procedures.Use the correct version of tables in the SYS$LIBRARY:DCLTABLESfile.3AU'<~1SDUSGOSUB, target of GOSUB not found - check spelling and presence of labele Interpreter (DCL);The destination label of a GOSUB statement cannot be found.k1B?CMDNOTFND, command not found - use RECALL/ALL to display saved commandse Interpreter (DCL)=The command that you tried to find using RECALL is not found.=Use the RECALL/ALL command to display all the saved commands,,then modify and reenter your RECALL command.3R'I:1BUSGOTO, target of GOTO not found - check spelling and presence of labele Interpreter (DCL):The label of a GOTO command cannot be found in the current command file.9Ensure that the correct label exists in the command file. 3!A'1r-3@KEYCNV, synonym key 'key-name' has been converted to 'key-name'e Interpreter (DCL)=The key name specified in the DEFINE/KEY command is a synonym>for a definable key name. The synonym name is converted to the*actual key name prior to defining the key.None. 3 F'*1wEINSFPRM, missing command parameters - supply all required parameterse Interpreter (DCL)9A command cannot be executed because one or more required9parameters are missing. With the DCL command interpreter,8this message occurs only during the execution of command=procedures; at the interactive level, the command interpreter5continues to prompt until all required parameters areentered.Correct the command procedure. 3+'>!1\o*INVOUTSPE, invalid output file assignmente Interpreter (DCL)=You specified an invalid or null file in defining SYS$OUTPUT. Correct and reenter the command. 36'N1gz5NEGATED, entity explicitly negated in command stringe Interpreter (DCL)INCREDSYN, incomplete redirection syntax; supply missing file parametere Interpreter (DCL)6The redirection syntax is missing the redirection file parameter.9Add the missing file parameter to the redirection syntax.3'4G1M`INVQUAL, invalid qualifiere Interpreter (DCL)3You entered an invalid qualifier for a DCL command.:Check your documentation for the command, then correct and reenter it.31'^1bu0COMMA, requested value is terminated by a commae Interpreter (DCL):The returned value is terminated by a comma, implying that"additional values are in the list.None.3.8'Ou1i|@7NOVALU, value not allowed - remove value specificatione Interpreter (DCL)6A qualifier or keyword that does not accept a value isspecified with a value.7Use the DCL command HELP or refer to the HP OpenVMS DCLDisplay the current symbols and adjust the abbreviation of theambiguous symbol.%%39'YK1j}!8ABVERB, ambiguous command verb - supply more characterse Interpreter (DCL):Too few characters were used to truncate a command name tomake the command name unique.A request to set a device spooled is made for a device that isalready set spooled.None.''3/ 5'~J1fyA4ENTNF, specified entity not found in command tablese Interpreter (DCL):The parameter, qualifier, or keyword specified as input to:one of the CLI$xxxx routines does not exist in the commandtables.9Check the spelling of the entity and its existence in thecommand tables.((3A'U1r@INVREDSYN, invalid redirection type specified in a pipe segmente Interpreter (DCL)=The redirection type specified in the pipe segment command ina pipeline is invalid.:Observe the following restrictions and correct the invalidredirection syntax::o SYS$OUTPUT redirection can be specified only in the last% pipe segment command of a pipeline.:o SYS$INPUT redirection can be specified only in the first% pipe segment command of a pipeline.))3B+']1\oT*COMPLX, expression too complex - simplifye Interpreter (DCL)4The command interpreter cannot analyze an arithmetic>expression in a command because it contains too many operatorsand/or parentheses.=Shorten the expression and reenter the command. If necessary,execute more than one command.**3A'*1r@SUPERSEDE, previous value of 'logical-name' has been supersedede Interpreter (DCL))The specified logical name was redefined.None.++3:'-21k~9LBLNOTALLINPIP, labels are not allowed in a PIPE commande Interpreter (DCL),A DCL label was specified in a PIPE command.1Remove the offending DCL labels from the command.,,36'x1gz5CONCAT, requested value is terminated by a plus signe Interpreter (DCL);The returned value is concatenated to the next value with a;plus sign, implying that additional values are in the list.None.--34'01ex.3PERMSYM, deletion of permanent symbols not allowede Interpreter (DCL)This message, associated with an internal status code returned>from the command interpreter result parse routine, indicates a-request to perform an unimplemented function.Contact HP Customer Support.//3S']71+CTRMMBX, terminal has associated mailbox - terminate image and then SPAWNe Interpreter (DCL)4A SPAWN command failed because the current image has'associated a mailbox with the terminal.6Terminate the current image, then reenter the command.0032@'21qD?INVRFM, invalid record format for record I/O - file not openede Interpreter (DCL)7This message is returned by the DCL command OPEN if the7file you are trying to open has a record format that isincompatible with record I/O.1DCL cannot be used to read or write to this file.113R'K%1BINVROUT, invalid routine specified in command tables - check .CLD filee Interpreter (DCL)=A user-defined command attempted to invoke a routine that DCL cannot find.$Correct the command definition file.223%P'y*1 7ASYMABR, abbreviated symbols not allowed - remove "*" from symbol namee Interpreter (DCL)_:NULFIL, missing or invalid file specification - respecifye Interpreter (DCL)5The command interpreter expected a file specification7following an execute procedure symbol (@), a prompting6message, a plus sign (+), or a comma (,), but no filespecification is entered. Correct and reenter the command.443B' !1sASYMDEL, invalid symbol or value delimiter - check command syntaxe Interpreter (DCL)>An illegal character is present in a command line containing a>symbol definition. This error can also indicate that arguments;were specified for a lexical function that does not require;arguments. The rejected portion of the command is displayedbetween backslashes. Correct and reenter the command.553 ''Mn1Xk&&DEVNOTFOR, device not mounted foreigne Interpreter (DCL);You cannot perform this operation because the device is notmounted foreign.=If the device is not mounted, mount it foreign; if the device/is mounted, dismount it and remount it foreign.6633'Es1dw/2NUMBER, invalid numeric value - supply an integere Interpreter (DCL);A numeric value is specified for a DCL command that expects7values in certain radices or interprets values within a:particular context. For example, the number 999 is entered:when an octal value is required, or an alphabetic value is9specified in a context that requires a numeric value (for example, a file version number).7Use the DCL command HELP or refer to the HP OpenVMS DCL:Dictionary for the legal values, then reenter the command.7734'1ex3SYMLNG, symbol name is too long - shorten the namee Interpreter (DCL)A symbol name is too long.Shorten the symbol name.883ZT':12l:CONFLICT, illegal combination of command elements - check documentatione Interpreter (DCL)>Two or more qualifiers, keywords, or parameters that cannot be'Y1o5=SYMOVF, no room for symbol definitions - delete some symbolse Interpreter (DCL)3The command interpreter cannot hold any more symbolprocedure(s), and use local symbols within procedures whenever possible.9The size of the command language interpreter (CLI) symbol=table can also be increased by resetting the SYSGEN parameterSYSGEN SHOW CLISYMTBL command shows the default table size andnot a recognized operator. The rejected portion of the command!is displayed between backslashes.;Correct the command. Enter the DCL command HELP EXPRESSIONS=for a list of valid operators, or refer to the HP OpenVMS DCL Dictionary.66#a!'Q1Re5 IVPROT, invalid protection codee Interpreter (DCL)A command contained more than the maximum number of parameters%allowed. This error can be caused by:'r1o=IVQLOC, invalid qualifier location - place after a parametere Interpreter (DCL)>A qualifier that can be used only to qualify a parameter value2in a command is placed following the command name.6Reenter the command; place the qualifier following the:parameter value it actually qualifies. Use the DCL command;HELP or refer to the HP OpenVMS DCL Dictionary to determine+the meaning and placement of the qualifier.<<eS'R1?IVQUAL, unrecognized qualifier - check validity, spelling, and placemente Interpreter (DCL)>lB'!!1sAINVFILSPE, input or output file specification too long - shortene Interpreter (DCL) A file specification is invalid. Correct and reenter the command.??LnP'bh1^PWDNOTVAL, old password validation error - password unchangede Interpreter (DCL)=The password was not changed because the password you entered=for validation does not match the account's current password.The password was not changed because the password you typed atThe CREATE/NAME_TABLE/ATTRIBUTES=SUPERSEDE command cannot find=an existing table of the same name. The new table is created.None.EEr:'1k~69IVVALU, invalid value syntax - see command documentatione Interpreter (DCL);A value for a command qualifier is not specified correctly,5or a command is not being used in its proper context.8The rejected portion of the command is displayed between backslashes.=Correct the command. Use the DCL command HELP or refer to the;HP OpenVMS DCL Dictionary to determine the proper syntax oruse of the command.FFr$'/p1Uh#PWDSYNTAX, illegal password syntaxe Interpreter (DCL).A password was entered using incorrect syntax.;Enter a password using 1 to 31 alphanumeric characters, the3dollar sign ($), or the underscore (_) characters.GGr;'1l:TABSUPER, previous table 'table-name' has been supersedede Interpreter (DCL);The CREATE/NAME_TABLE/ATTRIBUTES=SUPERSEDE command found anAn executing command procedure was interrupted by a Ctrl/Y and=is still active. The READ command is trying to read data from=this interrupted command procedure, which has no read access.=To read data from the terminal, repeat the READ command using;SYS$COMMAND as the input file. The STOP command can also be=used to deactivate the interrupted command procedure, and the5READ command can be repeated as originally specified.QQ;'Y1l:ATTACHED, terminal now attached to process 'process-name'e Interpreter (DCL)>This message is output by the DCL command ATTACH or SPAWN whenit attaches to a process.None.RRt;'~1l:NOFORCMD, account restricted - foreign commands not valide Interpreter (DCL):Foreign commands have been disabled for this account. (See7the OpenVMS User's Manual for an explanation of foreign commands.)>This account requires that all images are run by verbs defined;in the CLI table (these are called DCLTABLES) specified for this account.SS,+'fi1\o>*INVLOGFIL, invalid log file specificatione Interpreter (DCL)7The log file specification is syntactically invalid for-reasons specified in an accompanying message.Make sure that the CALL statement in your command procedure isroutine, indicates that the specified entity is not explicitly7present in the command line, but is present by default.None.WW/'|!1`s.TKNOVF, command element is too long - shortene Interpreter (DCL)>An element (that is, any string placed between two delimiters)'n1o,=OVRFLW, too much data - modify size of field or size of datae Interpreter (DCL);A data value is larger than the area defined to receive it;;for example, a DCL command, DEPOSIT, requested that a value1larger than 1 byte be deposited in a 1-byte area.>Verify the value and the area to receive it; correct the value.or the receiving area and reenter the command.YY 1'1bu0DEFKEY, 'state' key 'key-name' has been definede Interpreter (DCL)The specified key is defined.None.ZZ?'1p">NORUNMCR, account restricted - RUN and MCR commands not valide Interpreter (DCL);The RUN and MCR commands are foreign commands and have been=disabled for this account. (See the OpenVMS User's Manual for$an explanation of foreign commands.)9This account requires that all images are run using verbs>defined in the CLI table (called DCLTABLES) specified for thisaccount.ist.r}dr; CLUSTER 11111Cluster Port DriverrMA, HP POSIX Thread* 6)1g|-5EXCCOP, exception raised; VMS condition code followss Library for OpenVMS;An exception has been raised by the EXC_HANDLING.H package,:which provides portable exceptions for the C language. The9accompanying OpenVMS condition code identifies the error.;See the documentation for the software that your program is;calling to determine the reason for this exception. Correct;the problem or use the EXC_HANDLING.H package to provide anexception handler.r+ 4)1ez83EXCCOPLOS, exception raised; some information losts Library for OpenVMSThe EXC_HANDLING.H package, which provides portable exceptionsINIT macro defined in the EXC_HANDLING.H package to initializethe exception.r> 7)U1h}6EXISTENCE, object referenced does not currently exists Library for OpenVMS8A DECthreads routine has been requested to operate on anobject that does not exist.9Consult the documentation for the DECthreads routine that;issued this message to determine the conditions that caused6it. Also check the program where the call is issued torequest that a thread terminate after first performing cleanupand shutdown operations.:If you do not want threads to terminate at the point where;this alert is being delivered, you can use several routines:(cma_alert_disable_general, cma_alert_disable_asynch, cma_=alert_restore, pthread_setcancel, and pthread_setasynccancel)>to specify points in the thread process where alerts cannot bedelivered to the thread. r@B0)ht1avR/ALERT_NESTING, improper nesting of alert scopes Library for OpenVMS6An attempt was made to restore an inner scope after an0enclosing outer scope had already been restored.=Examine the code to determine where the incorrect alert state5variable was passed to the cma_alert_restore routine. rB5)1f{u4WRONGMUTEX, wrong mutex specified in condition waits Library for OpenVMS8A thread attempted to wait for a condition variable that8already has at least one thread waiting, and that thread9specified a different mutex. DECthreads requires that all=threads concurrently waiting for a condition variable specifythe same mutex.=Design your code so that each condition variable represents aDetermine which routine raised the exception. Then consult the;documentation to determine the correct parameters and value=ranges. Update your code accordingly and retry the operation.r =)/y1n+init while DECthreads was still trying to initialize itself onto require less stack space; for example, nest your calls less-deeply or allocate less storage on the stack.r0))do1ZoB(TIMED_OUT, timed condition wait expireds Library for OpenVMS>On a cma_cond_timed_wait routine, the timer expired before the$condition was signaled or broadcast.=Take appropriate action based on program dependencies for the0specific condition variable wait that timed out.rV)1)BUSE_ERROR, requested operation is inappropriate for the specified objects Library for OpenVMS7The state or type of an object is inappropriate for the:operation; for example, the operation attempts to unlock amutex that is not locked.8Determine which routine caused the error and consult the:documentation to learn which object states are appropriatefor the routine.rC)1tBNOSTACKMEM, no space is currently available to create a new stacks Library for OpenVMS9A call to cma_create_thread or another DECthreads routine=requires a new stack to be created, but there is insufficientspace to create it.additional stacks may be created. Alternatively, adjust system>or user quotas to allow the allocation of more virtual memory.r -)~1^s,IN_USE, object referenced is already in uses Library for OpenVMS=The DECthreads operation cannot be performed on the specified=object because it is already in use; for example, the routine/is attempting to delete a mutex that is locked.:Determine which routine caused the error and make sure the7object is in an appropriate state before attempting the operation.rHNF1&1111NICONFIG, Ethernet Configurator ModulerONV, Convert Utilit7*1hi6UDF_BKS, cannot convert UDF records into spanned filey)UDF records cannot span block boundaries.Specify no block spanning.r:=;1kl9UDF_BLK, cannot fit UDF records into single block bucketyUse the ANALYZE/RMS_FILE command to determine the cause of thestructure error.r. $?1UV#ILL_VALUE, illegal parameter valuey3An invalid or out-of-range value was specified on a qualifier.Specify a valid value.r;.=91_`-PROERR, prolog checksum error at VBN = 'nnn'yThis message will be accompanied by an RMS file system messagethat explains the error.>Take action based on the accompanying RMS file system message.rK 0R91ab/CREA_ERR, error creating work file 'file-spec'y=This message will be accompanied by an RMS error message thatexplains the error.8Take action based on the accompanying RMS error message.rg (91YZ,'EXTN_ERR, unable to extend output filey=The size of the input file exceeded the initial allocation of=the output file, and when the Convert utility tried to extendthe file, an error occurred.8Take action based on the accompanying RMS error message.rp n61QRDUP, duplicate key encounteredy>More than one record in the input file has the same value in a.key field, but duplicate keys are not allowed.5Either allow duplicate keys or change the key values.rs`!1MNREX, record already existsy:An attempt was made to write a record into a relative file$cell that already contains a record. Delete the record and try again. r%^E1VW$RMS, record caused RMS severe erroryThe /APPEND qualifier was specified and the output file is not sequential. Specify /NOAPPEND and try again.%%r*M/1[\)BADSORT, error trying to sort input filey8This message is accompanied by a SORT error message thatexplains the error..Take action based on the accompanying message.&&r ')(1XY&IDX_LIM, exceeded maximum index levely(The index tree depth exceeded 32 levels.'Redesign the file to make it shallower.''r9Ln1jk%8PAD, PAD option ignored, output record format not fixedy>Records can be padded only with the FIXED record format in the output file.;Either change the output file record format to FIXED, or do1not specify a /PAD qualifier on the command line.((rB&b1WXT%RSK, record shorter than primary keyy;The record does not contain enough data to fill the primary%key field in the indexed output file.>Compare the layout of the input and output records, and changeIncrease the FILLM parameter in the user authorization record.11r18lm1ijC7VFC, record too short to fill fixed part of VFC recordy;There are fewer bytes in the input record than are required/for the fixed portion of the VFC output record.:Either make the fixed control portion of the output record1smaller, or do not use the /FIXED_CONTROL option.22r ,c!1]^+ILL_KEY, illegal key or value out of rangey=/KEY was specified with a nonnumeric value, or with a numeric$value outside the range of 0 to 254. Specify a legal value with /KEY.33r,/1]^+LOADIDX, error loading secondary index 'n'y9An error occurred during the load of the specified key of>reference on the output file. (Note that indexes 0 through n-1 are intact.).Take action based on the accompanying message.44r)!Y1RS; PLV, unsupported prolog versiony:The version number field in the file's prolog read on open>indicates that the file cannot be processed by this version ofthe RMS file system.;Verify your version of the RMS file system; use the correctversion to process the file.55rH#1KLSEQ, record not in ordery6/NOSORT was specified, but the primary keys are not inascending order."Specify /SORT, or specify /NOFAST.66r /ReclaiJ,pE1]f+NOTIDX, output file is not an indexed filem Utility6A nonindexed file (for example, a sequential file) was8specified as the target for a Convert/Reclaim operation.9Specify only Prolog 3 indexed files for a Convert/Reclaim operation.77r1!Y1R[C PLV, unsupported prolog versionm Utility:The version number field in the file's prolog read on open>indicates that the file cannot be processed by this version ofthe RMS file system.;Verify your version of the RMS file system; use the correctversion to process the file.88r!kZ1R[  PLV, unsupported prolog versionm Utility2A Prolog 1 or Prolog 2 indexed file was specified;7CONVERT/RECLAIM works only with Prolog 3 indexed files.6Specify a Prolog 3 file, or use the Convert utility to"reorganize the Prolog 1 or 2 file.99r8ERT11111CONV, Convert Utility::rE /RECLAIM11111CONV, Convert/Reclaim Utility;;r=RASH11111BUGCHECK, System Bugcheck<<r: EATE/FDL11111FDL, FDL Utilities==rF, Cross-Referenc $+1U^#FAOBUG, FAO system service failuree Utility*The $FAO system service returned an error.Contact HP Customer Support.>>r1 %^1V_C$FAOFAIL, FAO system service failuree Utility8The $FAO system service returned an error. An unexpected$internal consistency check occurred.8Ensure that the field descriptor FAO control strings are:correct. If necessary, have your system manager contact HPCustomer Support.??rluster Port DriverAd1rr@Port Error Bit(s) Set - CNF/PMC/PSR 'xxxxxxxx/xxxxxxxx/xxxxxxxx'8The port driver attempts to reinitialize the port; after*50 attempts, it marks the device off line.>Check the error logs for a sanity timeout. This sanity timeout>is indicated by bit 6 of the PSR (PSR = 'xxxxxx4x'). The errorattempts to reinitialize the adapter; after 50 failed attemptsit marks the device off line.7Contact HP Customer Support to check the port hardware.AArR4^1eed3Port has Closed Virtual Circuit - REMOTE PORT 'xxx'=The port driver has closed the virtual circuit that the localport opened to the remote port.:Check the PP$DB_STATUS field of the error log entry to see>why the virtual circuit is closed. This error is normal if the&remote system crashed or is shut down.BBr/1``.Port incompatible with nonzero system base PA.=You attempted to use an older non-PCI device, such as an XMI-:based CIXCD or KFMSB, on an Alpha system whose main memory.does not begin at physical address zero (PA0).>Use CIXCD or KFMSB adapters only in systems with system memory>based at physical address zero (0). Use adapters such as CIPCA;or KFPSA in systems with system memory based above physical address zero.CCrLL1GGPort is going Offline=The port is offline after failing to reinitialize following a port failure.9Check the error log for errors from this port and call HPCustomer Support.DDr,aL1]] +Port is Reinitializing. Check the Error Log9The port is reinitializing after a port failure. The port&attempts to recover from all failures.9Check the error log for errors from this port and call HPCustomer Support.EErKDL1uu]CPort is Reinitializing ('number' Retries Left). Check the Error Log9The port is reinitializing after a port failure. The port=attempts to recover from a failure, and if the retry count is#exhausted, the port is set offline.9Check the error log for errors from this port and call HPCustomer Support.FFr ?<1AAPort Power Down8The port driver detected a power down interrupt from theport.;Contact HP Customer Support to check the port power supply.GGr 1?? Port Power Up5A system-wide power failure was detected and is being9recovered. In the case of a CI 750 adapter, the expansion8box may have lost power and power is now being restored.None.HHr Ck81ttBPort Transition Failure - CNF/PMC/PSR 'xxxxxxxx/xxxxxxxx/xxxxxxxx'8The port driver attempts to reinitialize the port; after150 failed attempts, it marks the device off line.7Contact HP Customer Support to check the port hardware.IIr^ M81~~8p-Port Transition Failure - NODESTS/CASR(H)/(L) 'xxxxxxxx/xxxxxxxx/xxxxxxxx'1The adapter is reporting an internal error during6initialization or restart. The port driver attempts to;reinitialize the adapter; after 50 failed attempts it marksthe device off line.7Contact HP Customer Support to check the port hardware.JJr| A*1rr@Port ucode not at current rev level. PROM/RAM rev is 'xxxx/xxxx')The port driver continues port operation.9Check the console storage device for the latest microcode6version. For ports with on-board microcode, contact HP;Customer Support to upgrade the port microcode. Compaq does9not support prolonged operation of the port with obsolete microcode.KKrB1ss APort ucode not at required rev level. PROM/RAM rev is 'xxxx/xxxx'7The adapter microcode must be updated to ensure correct=operation. Most likely a major defect exists in the microcode"revision currently in the adapter.;Load the latest microcode for that adapter from the console7load media, or contact HP Customer Support to check the'hardware and load the latest microcode.LLr";1SS!Message Free Queue Insert Failure;The port driver attempts to reinitialize the port; after 501oo=Remote System Conflicts with Known System - REMOTE PORT 'xxx'8The port driver configuration poller discovered a remote;system with SCSSYSTEMID or SCSNODE equal to that of another2system to which a virtual circuit is already open.up any longer than necessary. If you are running in an OpenVMS=Cluster environment and two systems with conflicting identity7are polling when another virtual circuit failure occurs:in the OpenVMS Cluster environment, systems in the cluster0environment might crash with a CLUEXIT bugcheck.QQr0@k81qq?Unexpected Interrupt - CNF/PMC/PSR 'xxxxxxxx/xxxxxxxx/xxxxxxxx'8The port driver attempts to reinitialize the port; after150 failed attempts, it marks the device off line.7Contact HP Customer Support to check the port hardware.RRr1J X1{{*Unexpected Interrupt - NODESTS/CASR(H)/(L) 'xxxxxxxx/xxxxxxxx/xxxxxxxx'>The adapter has issued a hardware interrupt when the driver is>not prepared to handle one. This indicates that the driver andk81oo=BVP timeout. - Status/Error/Data 'xxxxxxxx/xxxxxxxx/xxxxxxxx';The port driver attempts to reinitialize the port; after 50.failed attempts, it marks the device off line.7Contact HP Customer Support to check the port hardware.UUr: 641gg15CPU ucode not at required rev level for port activity3The port driver will not attempt to start the port.:On a VAX-11/750 system, make sure that the console TU58 is>present and up-to-date. Otherwise, contact HP Customer Supportto check the port hardware.VVr;?51pp>Cables have gone from CROSSED to UNCROSSED - REMOTE PORT 'xxx'4A former crossed cable condition has been corrected.None.WWr <?_O1pp>Cables have gone from UNCROSSED to CROSSED - REMOTE PORT 'xxx'9A self-test loopback packet has detected a crossed cables$condition or other software failure.The port driver closes the port-to-port virtual circuit to the remote port.8Retain the error logs and crash dumps from the local and0remote systems, and contact HP Customer Support.YYrO8?1ii7Software is Closing Virtual Circuit - REMOTE PORT 'xxx'8The port driver closed the virtual circuit to the remoteport.example, causes this error and may be detected from the one or>two previous error log entries noting bad paths to this remotenode.ZZrPk[1MMSoftware Shutting Down Port;The port driver attempts to reinitialize the port; after 50.failed attempts, it marks the device off line.;Check other error log entries for the possible cause of theport reinitialization failure.[[rUk1;?Excessive packet losses on LAN Path from 'local-device-name' to* 'device-name' on REMOTE NODE 'node-name':PEDRIVER had to perform an excessively high rate of packet7retransmissions on the LAN path consisting of the local=device, the intervening network, and the device on the remotenode.9This message indicates that the LAN path has degraded and8is approaching, or has reached, the point where reliable;communications with the remote node are no longer possible.=It is likely that the virtual circuit to the remote node will>close if the losses continue. Furthermore, continued operation=with high LAN packet losses can result in significant loss in>performance because of the communication delays resulting from=the packet loss detection timeouts and packet retransmission.$Take the following corrective steps:;1 Check the local and remote LAN device error counts to see9 if a problem exists on the devices. Issue the following commands on each node:# $ SHOW DEVICE local-device-name $ MC SCACP SCACP> SHOW LAN device-name $ MC LANCP( LANCP> SHOW DEVICE device-name/COUNT82 If device error counts on the local devices are within7 normal bounds, contact your network administrators to5 request that they diagnose the LAN path between the devices.= If necessary, contact HP Customer Support for assistance in$ diagnosing your LAN path problems.;For additional driver troubleshooting information, refer to&the HP OpenVMS Cluster Systems manual.\\rY;1OOResponse Queue Remove Failure;The port driver attempts to reinitialize the port; after 501oo'=Unrecognized SCA Packet - FLAGS/OPC/STATUS/PORT 'xx/xx/xx/xx':The port driver closes the port-to-port virtual circuit to>the remote port. If the virtual circuit is already closed, the=port driver inhibits datagram reception from the remote port.>Save the error log file that contains this entry and the crash=dumps from both the local and remote systems. Then contact HPCustomer Support.``ry ')^1XX&Failed to Locate Port Micro-code Image(The port driver will not start the port.7Make sure that the console load media is present in the%console drive, and reboot the system.aar~di1AACI port timeout8The port driver attempts to reinitialize the port; after*50 attempts, it marks the device off line.>Contact HP Customer Support to check the port hardware, the CI)cable, and the node number configuration.bbrS:U1kke9CI port Virtual Circuit SETCKT OPEN timeout: Restart Port9When the CI port found a new, remote CI node, the CI port;did not complete the processing of a "virtual-circuit-open"indicates problems with port load balancing, system tuning, or+faulty hardware or firmware on the CI port.ccr #;1TT"Datagram Free Queue Insert Failure;The port driver attempts to reinitialize the port; after 50defined in the CLI table (called DCLTABLES) specified for thisaccount.ist.Cluster Port Driver #;1TT"Datagram Free Queue Remove Failure;The port driver attempts to reinitialize the port; after 50Contact HP Customer Support. This error is caused by a failure:to obtain access to an interlocked queue. Possible sourcesHSC console, it is useful to read them only if the HSC console>does not record them for some reason (if it runs out of paper, for example).>The sending of HSC informational error log datagrams should beThe port driver switched communications from a low-performanceeither nonpaged pool or bus addressable pool (BAP) in order tomight be wrong for the current configuration). The best way to>determine the correct values is to set all of these parameters:and NPAGCALC to their default values, boot the system, and7run AUTOGEN. Using AUTOGEN with feedback will provide a:more accurate value for NPAGEDYN and NPAGEVIR. For the BAP)parameters, feedback makes no difference. 1C1bb(0Insufficient Non-paged Pool for Virtual Circuits>After finding that insufficient memory resources are available:for normal communication, the port driver breaks a virtualcircuit.:Increase the NPAGEDYN pool SYSGEN parameter and reboot thesystem.JD71{{APath #n. Has become working but CROSSED to Path #n. - REMOTE PORT 'xxx':The specified path is working, but the cables appear to becrossed.6Check for crossed-cable pairs and correct the problem. 7C1hh6Path #n. Has gone from BAD to GOOD - REMOTE PORT 'xxx'SYSGEN parameter is set too low, especially if the remote node,is running privileged user-written software.04o1aa/SCSSYSTEMID has NOT been set to a nonzero value3The port driver will not attempt to start the port.>Modify the SCSSYSTEMID SYSGEN parameter and reboot the system./See the appropriate OpenVMS installation guide.1?kh1ppC>No Path-Block During Virtual Circuit Close - REMOTE PORT 'xxx';The port driver attempts to reinitialize the port; after 50.failed attempts, it marks the device off line.=Keep the error logs and crash dumps from the local and remote)systems, and contact HP Customer Support.Lj1}};Received Connect Without Path-Block - FLAGS/OPC/STATUS/PORT 'xx/xx/xx/xx'4A virtual circuit class message that requests an SCS=connection has been received from a remote system while there>is no virtual circuit to that system. The port driver attemptsto require less stack space; for example, nest your calls less-deeply or allocate less storage on the stack.r0))do1ZoB(TIMED_OUT, timed condition wait expireds Library for OpenVMS>On a cma_cond_timed_wait routine, the timer expired before the$condition was signaled or broadcast.=Take appropriate action based on program dependencies for the0specific condition variable wait that timed out.rV)1)BUSE_ERROR, requested operation is inappropriate for the specified objects Library for OpenVMS7The state or type of an object is inappropriate for the:operation; for example, the operation attempts to unlock amutex that is not locked.8Determine which routine caused the error and consult the:documentation to learn which object states are appropriatefor the routine.rC)1tBNOSTACKMEM, no space is currently available to create a new stacks Library for OpenVMS9A call to cma_create_thread or another DECthreads routine=requires a new stack to be created, but there is insufficientspace to create it.additional stacks may be created. Alternatively, adjust system>or user quotas to allow the allocation of more virtual memory.r -)~1^s,IN_USE, object referenced is already in uses Library for OpenVMS=The DECthreads operation cannot be performed on the specified=object because it is already in use; for example, the routine/is attempting to delete a mutex that is locked.:Determine which routine caused the error and make sure the7object is in an appropriate state before attempting the operation.rHNF1&1111NICONFIG, Ethernet Configurator ModulerONV, Convert Utilit7*1hi6UDF_BKS, cannot convert UDF records into spanned filey)UDF records cannot span block boundaries.Specify no block spanning.r:=;1kl9UDF_BLK, cannot fit UDF records into single block bucketyUse the ANALYZE/RMS_FILE command to determine the cause of thestructure error.r. $?1UV#ILL_VALUE, illegal parameter valuey3An invalid or out-of-range value was specified on a qualifier.Specify a valid value.r;.=91_`-PROERR, prolog checksum error at VBN = 'nnn'yThis message will be accompanied by an RMS file system messagethat explains the error.>Take action based on the accompanying RMS file system message.rK 0R91ab/CREA_ERR, error creating work file 'file-spec'y=This message will be accompanied by an RMS error message thatexplains the error.8Take action based on the accompanying RMS error message.rg (91YZ,'EXTN_ERR, unable to extend output filey=The size of the input file exceeded the initial allocation of=the output file, and when the Convert utility tried to extendthe file, an error occurred.8Take action based on the accompanying RMS error message.rp n61QRDUP, duplicate key encounteredy>More than one record in the input file has the same value in a.key field, but duplicate keys are not allowed.5Either allow duplicate keys or change the key values.rs`!1MNREX, record already existsy:An attempt was made to write a record into a relative file$cell that already contains a record. Delete the record and try again. r%^E1VW$RMS, record caused RMS severe erroryThe /APPEND qualifier was specified and the output file is not sequential. Specify /NOAPPEND and try again.%%r*M/1[\)BADSORT, error trying to sort input filey8This message is accompanied by a SORT error message thatexplains the error..Take action based on the accompanying message.&&r ')(1XY&IDX_LIM, exceeded maximum index levely(The index tree depth exceeded 32 levels.'Redesign the file to make it shallower.''r9Ln1jk%8PAD, PAD option ignored, output record format not fixedy>Records can be padded only with the FIXED record format in the output file.;Either change the output file record format to FIXED, or do1not specify a /PAD qualifier on the command line.((rB&b1WXT%RSK, record shorter than primary keyy;The record does not contain enough data to fill the primary%key field in the indexed output file.>Compare the layout of the input and output records, and changeIncrease the FILLM parameter in the user authorization record.11r18lm1ijC7VFC, record too short to fill fixed part of VFC recordy;There are fewer bytes in the input record than are required/for the fixed portion of the VFC output record.:Either make the fixed control portion of the output record1smaller, or do not use the /FIXED_CONTROL option.22r ,c!1]^+ILL_KEY, illegal key or value out of rangey=/KEY was specified with a nonnumeric value, or with a numeric$value outside the range of 0 to 254. Specify a legal value with /KEY.33r,/1]^+LOADIDX, error loading secondary index 'n'y9An error occurred during the load of the specified key of>reference on the output file. (Note that indexes 0 through n-1 are intact.).Take action based on the accompanying message.44r)!Y1RS; PLV, unsupported prolog versiony:The version number field in the file's prolog read on open>indicates that the file cannot be processed by this version ofthe RMS file system.;Verify your version of the RMS file system; use the correctversion to process the file.55rH#1KLSEQ, record not in ordery6/NOSORT was specified, but the primary keys are not inascending order."Specify /SORT, or specify /NOFAST.66r /ReclaiJ,pE1]f+NOTIDX, output file is not an indexed filem Utility6A nonindexed file (for example, a sequential file) was8specified as the target for a Convert/Reclaim operation.9Specify only Prolog 3 indexed files for a Convert/Reclaim operation.77r1!Y1R[C PLV, unsupported prolog versionm Utility:The version number field in the file's prolog read on open>indicates that the file cannot be processed by this version ofthe RMS file system.;Verify your version of the RMS file system; use the correctversion to process the file.88r!kZ1R[  PLV, unsupported prolog versionm Utility2A Prolog 1 or Prolog 2 indexed file was specified;7CONVERT/RECLAIM works only with Prolog 3 indexed files.6Specify a Prolog 3 file, or use the Convert utility to"reorganize the Prolog 1 or 2 file.99r8ERT11111CONV, Convert Utility::rE /RECLAIM11111CONV, Convert/Reclaim Utility;;r=RASH11111BUGCHECK, System Bugcheck<<r: EATE/FDL11111FDL, FDL Utilities==rF, Cross-Referenc $+1U^#FAOBUG, FAO system service failuree Utility*The $FAO system service returned an error.Contact HP Customer Support.>>r1 %^1V_C$FAOFAIL, FAO system service failuree Utility8The $FAO system service returned an error. An unexpected$internal consistency check occurred.8Ensure that the field descriptor FAO control strings are:correct. If necessary, have your system manager contact HPCustomer Support.??rluster Port DriverAd1rr@Port Error Bit(s) Set - CNF/PMC/PSR 'xxxxxxxx/xxxxxxxx/xxxxxxxx'8The port driver attempts to reinitialize the port; after*50 attempts, it marks the device off line.>Check the error logs for a sanity timeout. This sanity timeout>is indicated by bit 6 of the PSR (PSR = 'xxxxxx4x'). The errorattempts to reinitialize the adapter; after 50 failed attemptsit marks the device off line.7Contact HP Customer Support to check the port hardware.AArR4^1eed3Port has Closed Virtual Circuit - REMOTE PORT 'xxx'=The port driver has closed the virtual circuit that the localport opened to the remote port.:Check the PP$DB_STATUS field of the error log entry to see>why the virtual circuit is closed. This error is normal if the&remote system crashed or is shut down.BBr/1``.Port incompatible with nonzero system base PA.=You attempted to use an older non-PCI device, such as an XMI-:based CIXCD or KFMSB, on an Alpha system whose main memory.does not begin at physical address zero (PA0).>Use CIXCD or KFMSB adapters only in systems with system memory>based at physical address zero (0). Use adapters such as CIPCA;or KFPSA in systems with system memory based above physical address zero.CCrLL1GGPort is going Offline=The port is offline after failing to reinitialize following a port failure.9Check the error log for errors from this port and call HPCustomer Support.DDr,aL1]] +Port is Reinitializing. Check the Error Log9The port is reinitializing after a port failure. The port&attempts to recover from all failures.9Check the error log for errors from this port and call HPCustomer Support.EErKDL1uu]CPort is Reinitializing ('number' Retries Left). Check the Error Log9The port is reinitializing after a port failure. The port=attempts to recover from a failure, and if the retry count is#exhausted, the port is set offline.9Check the error log for errors from this port and call HPCustomer Support.FFr ?<1AAPort Power Down8The port driver detected a power down interrupt from theport.;Contact HP Customer Support to check the port power supply.GGr 1?? Port Power Up5A system-wide power failure was detected and is being9recovered. In the case of a CI 750 adapter, the expansion8box may have lost power and power is now being restored.None.HHr Ck81ttBPort Transition Failure - CNF/PMC/PSR 'xxxxxxxx/xxxxxxxx/xxxxxxxx'8The port driver attempts to reinitialize the port; after150 failed attempts, it marks the device off line.7Contact HP Customer Support to check the port hardware.IIr^ M81~~8p-Port Transition Failure - NODESTS/CASR(H)/(L) 'xxxxxxxx/xxxxxxxx/xxxxxxxx'1The adapter is reporting an internal error during6initialization or restart. The port driver attempts to;reinitialize the adapter; after 50 failed attempts it marksthe device off line.7Contact HP Customer Support to check the port hardware.JJr| A*1rr@Port ucode not at current rev level. PROM/RAM rev is 'xxxx/xxxx')The port driver continues port operation.9Check the console storage device for the latest microcode6version. For ports with on-board microcode, contact HP;Customer Support to upgrade the port microcode. Compaq does9not support prolonged operation of the port with obsolete microcode.KKrB1ss APort ucode not at required rev level. PROM/RAM rev is 'xxxx/xxxx'7The adapter microcode must be updated to ensure correct=operation. Most likely a major defect exists in the microcode"revision currently in the adapter.;Load the latest microcode for that adapter from the console7load media, or contact HP Customer Support to check the'hardware and load the latest microcode.LLr";1SS!Message Free Queue Insert Failure;The port driver attempts to reinitialize the port; after 501oo=Remote System Conflicts with Known System - REMOTE PORT 'xxx'8The port driver configuration poller discovered a remote;system with SCSSYSTEMID or SCSNODE equal to that of another2system to which a virtual circuit is already open.up any longer than necessary. If you are running in an OpenVMS=Cluster environment and two systems with conflicting identity7are polling when another virtual circuit failure occurs:in the OpenVMS Cluster environment, systems in the cluster0environment might crash with a CLUEXIT bugcheck.QQr0@k81qq?Unexpected Interrupt - CNF/PMC/PSR 'xxxxxxxx/xxxxxxxx/xxxxxxxx'8The port driver attempts to reinitialize the port; after150 failed attempts, it marks the device off line.7Contact HP Customer Support to check the port hardware.RRr1J X1{{*Unexpected Interrupt - NODESTS/CASR(H)/(L) 'xxxxxxxx/xxxxxxxx/xxxxxxxx'>The adapter has issued a hardware interrupt when the driver is>not prepared to handle one. This indicates that the driver andk81oo=BVP timeout. - Status/Error/Data 'xxxxxxxx/xxxxxxxx/xxxxxxxx';The port driver attempts to reinitialize the port; after 50.failed attempts, it marks the device off line.7Contact HP Customer Support to check the port hardware.UUr: 641gg15CPU ucode not at required rev level for port activity3The port driver will not attempt to start the port.:On a VAX-11/750 system, make sure that the console TU58 is>present and up-to-date. Otherwise, contact HP Customer Supportto check the port hardware.VVr;?51pp>Cables have gone from CROSSED to UNCROSSED - REMOTE PORT 'xxx'4A former crossed cable condition has been corrected.None.WWr <?_O1pp>Cables have gone from UNCROSSED to CROSSED - REMOTE PORT 'xxx'9A self-test loopback packet has detected a crossed cables$condition or other software failure.The port driver closes the port-to-port virtual circuit to the remote port.8Retain the error logs and crash dumps from the local and0remote systems, and contact HP Customer Support.YYrO8?1ii7Software is Closing Virtual Circuit - REMOTE PORT 'xxx'8The port driver closed the virtual circuit to the remoteport.example, causes this error and may be detected from the one or>two previous error log entries noting bad paths to this remotenode.ZZrPk[1MMSoftware Shutting Down Port;The port driver attempts to reinitialize the port; after 50.failed attempts, it marks the device off line.;Check other error log entries for the possible cause of theport reinitialization failure.[[rUk1;?Excessive packet losses on LAN Path from 'local-device-name' to* 'device-name' on REMOTE NODE 'node-name':PEDRIVER had to perform an excessively high rate of packet7retransmissions on the LAN path consisting of the local=device, the intervening network, and the device on the remotenode.9This message indicates that the LAN path has degraded and8is approaching, or has reached, the point where reliable;communications with the remote node are no longer possible.=It is likely that the virtual circuit to the remote node will>close if the losses continue. Furthermore, continued operation=with high LAN packet losses can result in significant loss in>performance because of the communication delays resulting from=the packet loss detection timeouts and packet retransmission.$Take the following corrective steps:;1 Check the local and remote LAN device error counts to see9 if a problem exists on the devices. Issue the following commands on each node:# $ SHOW DEVICE local-device-name $ MC SCACP SCACP> SHOW LAN device-name $ MC LANCP( LANCP> SHOW DEVICE device-name/COUNT82 If device error counts on the local devices are within7 normal bounds, contact your network administrators to5 request that they diagnose the LAN path between the devices.= If necessary, contact HP Customer Support for assistance in$ diagnosing your LAN path problems.;For additional driver troubleshooting information, refer to&the HP OpenVMS Cluster Systems manual.\\rY;1OOResponse Queue Remove Failure;The port driver attempts to reinitialize the port; after 501oo'=Unrecognized SCA Packet - FLAGS/OPC/STATUS/PORT 'xx/xx/xx/xx':The port driver closes the port-to-port virtual circuit to>the remote port. If the virtual circuit is already closed, the=port driver inhibits datagram reception from the remote port.>Save the error log file that contains this entry and the crash=dumps from both the local and remote systems. Then contact HPCustomer Support.``ry ')^1XX&Failed to Locate Port Micro-code Image(The port driver will not start the port.7Make sure that the console load media is present in the%console drive, and reboot the system.aar~di1AACI port timeout8The port driver attempts to reinitialize the port; after*50 attempts, it marks the device off line.>Contact HP Customer Support to check the port hardware, the CI)cable, and the node number configuration.bbrS:U1kke9CI port Virtual Circuit SETCKT OPEN timeout: Restart Port9When the CI port found a new, remote CI node, the CI port;did not complete the processing of a "virtual-circuit-open"indicates problems with port load balancing, system tuning, or+faulty hardware or firmware on the CI port.ccr #;1TT"Datagram Free Queue Insert Failure;The port driver attempts to reinitialize the port; after 50defined in the CLI table (called DCLTABLES) specified for thisaccount.ist.#}^/JDCL1'1111CLI, Command Language Interpreter (DCL)9, COBRTL, LIBRTL+*1\\:*ACTIMAGE, error activating image 'string';A problem was encountered activating the image specified in<'string'. In most cases, a secondary message will follow the;ACTIMAGE message text with more detailed information on why=the image cannot be activated. For example, if you try to run;an Alpha image on an Integrity server system, the secondary9message is "-IMGACT-F-NOT_I64, image is not an HP OpenVMSIndustry Standard 64 image".displayed. You may need to contact you system administrator to=correct many of the issues such as access privilege problems.'X, Data Compressio (k]1K_'INVARG, invalid argumentn/Expansion Facility>Either your program specified an invalid argument or the value+of an argument is not in the correct range.:Correct the program to specify a valid argument or a value!that is within the correct range.:-(J@1^r,AGAIN, another data analysis pass is neededn/Expansion Facility:DCX$MAKE_MAP must see all data records again before it cancompute a map.5Present the application program data to DCX again for analysis.kC(!1Pd\}INVCTX, invalid context blockn/Expansion Facility;A DCX procedure is called with an invalid context variable,TRUNC, data truncatedn/Expansion Facility6The buffer is too small for the compressed data record=produced by DCX$COMPRESS_DATA or for the expanded data record;produced by DCX$EXPAND_DATA. As much data as the buffer canhold has been returned.Provide a larger buffer. ADTM, DECdtm Serviced4v1@ALOG_FAIL, transaction aborted because an attempt to write to the! transaction log faileds3The DECdtm transaction log could not be written to.make sure that the local node name is not identical to another;node name. For information about doing this, see the DECdnsORPHAN_BRANCH, transaction aborted because it was incorrectly distributeds,The transaction was incorrectly distributed.5If you are using DECdtm services in a Phase IV DECnet9environment, note the conditions leading to the error andcontact HP Customer Support.:If you are using DECdtm services in a DECnet-Plus network,>make sure that the local node name is not identical to another;node name. For information about doing this, see the DECdnsAn error occurred while generating an authorization key. A key>was generated but could not be saved. The key was revoked, and;the authorization ID previously associated with the displaydevice was deleted.;Ensure that the display device is still available, and that:you have write access to the X authority file. Reenter thecommand. D"\1uCBADDEFTRAN, logical DECW$SETDISPLAY_DEFAULT_TRANSPORT is not validif for OpenVMSTRANSPORT logical refers to a valid network transport (DECNET,8TCPIP, or LOCAL) and not to a list of equivalence names.!!1"J 1bp0BADPROXY, 'string' is not a valid proxy addressif for OpenVMS:The LBX proxy server returned a string that is not a validproxy address.2Verify that the proxy manager is using the correct7configuration file and has started the LBX proxy server properly.=If there is a configuration error, shutdown the proxy manager=using the STOP/ID command, and correct the error. Restart the;proxy manager and repeat the SET DISPLAY command. Note thatIf a configuration error is not found, contact your HP support:representative or the support representative for the proxymanager software.""5="1n|lGThe specified display device was created using a proxy server,>which does not allow changes to the node, transport, or servervalues.8Use the SET DISPLAY/CREATE/PROXY command to create a new8display device with the appropriate node, transport, andserver values.&&/"01`n.NAMENOTFOUND, named value not found in deviceif for OpenVMS/The requested named value has not been defined.None.''/")x1`n.NOACCESSPROXY, unable to access proxy managerif for OpenVMS(The proxy manager could not be accessed.>Check that the proxy manager has been started. Verify that the;node name, transport, and port number for the proxy manager are correct.:If the proxy manager is on a remote host that uses another>operating platform, check that the proxy manager allows access;from this host and does not require further authentication.8Correct the underlying problem, and reenter the command.(([:"t1kym9NOCLIENT, DECwindows Motif client software not installedif for OpenVMS=The specified DCL command qualifier requires the installation5of DECwindows Motif for OpenVMS Version 1.3 or later.:Ask your system manager to install the appropriate version9of DECwindows Motif, or avoid using the specified command qualifier.))C"D1tBNOPMCONN, cannot open a connection to the proxy manager, 'string'if for OpenVMS:An error occurred while attempting to connect to the proxymanager.=Take action based on the accompanying message. Check that theneeded, then use the SHOW DISPLAY/VALUE command to verify thatthe value is correct.11D"{1uCXAUTHNOTUPD, authorization entry not removed from X authority fileif for OpenVMS9The generated authorization key was revoked; however, the:associated entry could not be removed from the X authorityfile.=Use the XAUTH command to view the contents of the X authority>file. If the authorization entry is found, remove it using the=XAUTH REMOVE command. Otherwise subsequent connections to theX server will be prevented.225"1ft.4NOSECURITY, the SECURITY extension is not availableif for OpenVMS;This message indicates that the SECURITY extension to the X=server is not available or that a client attempted to connect:to the X server using a generated, untrusted authorizationkey.:Check the definition of the logical DECW$SERVER_EXTENSIONS=in the DECW$PRIVATE_SERVER_SETUP.COM file and verify that the+extension has been enabled on the X server.33)"1Zh(NOSERVER, could not connect to X serverif for OpenVMS;An error occurred while attempting to generate or revoke an=authorization key. The key could not be generated or revoked,2because the connection to the X server was denied.9Check that the node, transport, and server values for the;display device are correct. Check that the user has a valid>authorization entry in the X authority file and that it grants6the appropriate permission to connect to the X server.44^7"*1hvFp6DEVNOTCREATED, device was not created by this processif for OpenVMS>The display device specified in the SET DISPLAY/DELETE command7is a supervisor-mode device that was not created by the;current process. This display device can only be deleted bythe process that created it.=Check that the correct device name was specified, and reenter8the command from the process that originally created the=device. Note that supervisor-mode display devices are deletedThe SET DISPLAY command was used to initiate a connection to a>Low-Bandwidth X (LBX) proxy server. An authentication protocol>for the server was found or specified without any accompanying/authorization data (from the X authority file).;Reenter the command using the /LBXDATA qualifier to specify9the appropriate authorization data (such as a valid magic8cookie). If the current authentication protocol does not5require additional data, any valid value can be used.77A"1r @XAUTH_LOCKED, the X authority file is locked by another processif for OpenVMS4The SET DISPLAY command could not save the generated:authorization key in the X authority file because the file/is currently locked for use by another process.>If the X authority file is locked for editing or reading by an>active process (such as by someone using xauth in command mode>to edit the file), wait for the process to complete its use of.the file, and reenter the SET DISPLAY command.:If the lock on the file is stale (such as from an abruptly9terminated process), use the XAUTH -b command to manually6release the lock, and reenter the SET DISPLAY command.88IFF, DIFFERENCES CoB*G1[`)SYSFAOERR, unexpected error from SYS$FAOmmand=An unexpected error occurred during a call to the $FAO systemservice.Contact HP Customer Support.99z]Q1?MAXDIF, maximum number of difference records encountered - DIF abortedmmand:The number of differences that have been found exceeds the7number that was specified with the /MAXIMUM_DIFFERENCES9qualifier. Therefore, the Differences utility terminated,;listing only those difference records it encountered beforereaching the maximum.None.::mf)H1 CMRGGTMTCH, value of 'x' for /MERGE is greater than /MATCH value of! 'y' /MERGE set to 'y'mmand(A /MERGE value exceeds the /MATCH value.9Decrease the /MERGE value to be less than or equal to the /MATCH value.;;/501`e.CMDLIN, command line segment in error 'error'mmand4Part of the command line is syntactically incorrect./Specify the correct syntax in the command line.<<v ,1QVFILAREDIF, files are differentmmand+The two files being compared are different.None.==6B1gl5STRCPYERR, unexpected error from string copy routinemmand6An unexpected error occurred during an RTL string copy operation.Contact HP Customer Support.>>!9\1RW CMDSYNTAX, command syntax errormmand8The syntax of the DIFFERENCES command line is incorrect.9Use the DCL command HELP to determine the correct command!syntax, then reenter the command.??m,K1CPARGTMTCH, value of 'x' for /PARALLEL is greater than /MATCH value( of 'y', /PARALLEL set to 'y'mmand+A /PARALLEL value exceeds the /MATCH value.1af/TOOMNYFIL, more than two input files specifiedmmand$Too many input files were specified.=Reenter the command, specifying no more than two input files.BBO1PUSAMEFILE, files are identicalmmand6This success message confirms that the two files beingcompared are identical.None.CC 6>1gl5INSVIRMEM, insufficient virtual memory - DIF abortedmmand=The Differences utility has run out of virtual memory because=it either (1) encountered a difference section that contains>more records than can be stored in virtual memory, or (2) ranIn the first case, reduce the size of the offending difference:section; the listing will have terminated in the middle ofIn the second case, rerun the Differences utility and generateone listing at a time.DD6{1gl5NOLOWVER, no lower version of file 'file-spec' foundmmand8The Differences utility cannot default the revision file9specification because no lower version of the master fileexists.4Check whether you correctly specified the file name.specification if it has a name different from the master file.EElH1DTWOWIDTHS, /WIDTH and /LINE_WIDTH are redundant - /LINE_WIDTH value& ignored, /WIDTH value usedmmand:Both /WIDTH and /LINE_WIDTH were specified; /LINE_WIDTH is unnecessary.None.FFSM, DISMOUNT Comma;0Lc1ac/SYSDEV, the system device cannot be dismountedndCorrect the device name (or logical name, if a logical name is#specified) and reenter the command.GGL/+01`b.CANNOTDMT, 'device-name' cannot be dismountednd*The specified device cannot be dismounted./Take action based on the accompanying messages.HHQ7.V1hj6MARKEDDMT, 'device-name' has been marked for dismountnd9When a device is marked for dismount, the volume dismount8completes as soon as the last open file on the volume is>closed. The DISMOUNT/CLUSTER/OVERRIDE=CHECKS command dismounts>the volume on nodes that have no files open on the volume, andSpecify a member of a shadow set or do not use this qualifier.JJW V@01@DSMCLUFAIL, dismount/cluster failed on one or more nodes in the clusternd7One or more nodes in the cluster failed to dismount thedevice./Take action based on the accompanying messages.KK[WS1?OPT_WBM_MERGE, shadow set requires a merge, continuing without bitmapnd>A merge was in progress when the command was executed. Because:the qualifier /POLICY=MINICOPY=OPTIONAL was specified, the>DISMOUNT operation completed, but no write bitmap was started.>A shadow set must be consistent before a member can be removedto start a write bitmap.>None. The device was removed successfully even though no writebitmap was started.LL_DR@1uw CREQ_WBM_MERGE, unable to start bitmap, shadow set requires a mergend;The command specified the /POLICY=MINICOPY qualifier, but amerge is in progress.6Allow the merge to complete; then reissue the DISMOUNTcommand.MMc:v1km9WBM_NOTAVAIL, unable to start bitmap, subsystem disablednd=One or more nodes in the cluster is not write bitmap capable.7This condition has disabled the write bitmap subsystem.the write bitmap could not be started by the shadowing driver.-However, the member was successfully removed.8This message likely indicates a memory resource problem.;None required. The member was successfully removed and will.require a full copy to be returned to the set.7However, to learn why the write bitmap failed to start,=DISMOUNT the shadow set member by specifying /POLICY=MINICOPY:(that is, without the =OPTIONAL keyword). The failure code-from shadowing will be displayed by DISMOUNT.OOu*A1[]-)SPOOLEDEV, 'n' devices spooled to volumend8The specified number of devices are being spooled to thevolume.:Stop the queues that are being spooled to the disk and use=the /NOSPOOL qualifier on the SET DEVICE command to reset thedevices in the queue.PP?e 1pr>SRCMEM, only source member of shadow set cannot be dismountednd;An attempt was made to dismount a shadow set member that is(the only valid source member of the set.4If there is only one shadow set member, it cannot beThe specified number of user files are open on the volume thatis to be dismounted.;Close all the open files on the volume. Use the SHOW DEVICE=command with the /FILES qualifier to verify that all files onthe volume have been closed.TT +B^1\^*INSTIMAGE, 'n' images installed on volumend9The specified number of images have been installed on thevolume.=Use the Install utility's REMOVE or DELETE commands to removeor delete the installed images.UU 1i01bd0FILESOPEN, volume has files open on remote nodend8The volume on the remote node has files open. You cannot/dismount the volume until all files are closed./Close the files or request that they be closed.VV 7N=1hj6INSWPGFIL, 'n' swap or page files installed on volumend>The specified number of swap or page files have been installedon the volume.ADVADVERSEND, multicast error while advertising clearinghouseuted Name Service (DECdns).o1o=ADVBADFORMAT, bad advertisement message received from deviceuted Name Service (DECdns)An internal error occurred in the DNS$ADVER process. The imagemight be corrupt.Contact HP Customer Support. Manual for$an explanation of foreign commands.)9This account requires that all images are run using verbs>defined in the CLI table (called DCLTABLES) specified for thisaccount.ist./( n/DNS, DIGITAL Distrib 4.81e3ADVCACHEINIT, could not initialize DNS clerk cacheuted Name Service (DECdns)7The DNS$ADVER process cannot initialize the DNS caches.;Take action based on the accompanying message. Make sure noADVDEFCONN, error connecting DNS$DEFAULT_FILE.DAT, no default namespace defineduted Name Service (DECdns)8The DNS$ADVER process opened the configuration file, but'cannot connect to the file and read it..Take action based on the accompanying message./&0.;/1a{/ADVDEFLOAD, error closing DNS$DEFAULT_FILE.DATuted Name Service (DECdns):The DNS$ADVER process cannot close the configuration file..Take action based on the accompanying message./i'[.1f{EADVDEFOPEN, error opening DNS$DEFAULT_FILE.DAT, no default namespace defineduted Name Service (DECdns)5The DNS$ADVER process cannot open the file containingThere is not enough memory available for the DNS$ADVER process&to allocate space to build a protocol.'Check process and system memory quotas./7,2./1c}I1ADVMBX, could not create mailbox DNS$SOLICIT_MBXuted Name Service (DECdns)The DNS$ADVER process attempted to create a DNS timeout value,7but received an error from the $GETTIM service routine..Take action based on the accompanying message./61.1b| 0ADVUIDNICK, failed to add NSNAME entry to cacheuted Name Service (DECdns)8An error occurred while trying to associate a UID with a9namespace nickname in the DNS global cache. No entry willbe made in the global cache.None./7'.M/1Xr&ADVWRITETHER, error writing on deviceuted Name Service (DECdns);An error occurred while DNS$ADVER was trying to write to anEthernet device..Take action based on the accompanying message./I8.U1i>7UNKNOWNCLEARINGHOUSE, the clearinghouse does not existuted Name Service (DECdns)The DNS solicit process cannot communicate with the advertiser4process. This may happen when the advertiser process:(DNS$ADVER) is unable to start properly, or has terminated abnormally.8Make sure the DNS$ADVER process is running. If it is not4running, restart it using the SYS$STARTUP:DNS$CLERK_The specified display device was created using a proxy server,>which does not allow changes to the node, transport, or servervalues.8Use the SET DISPLAY/CREATE/PROXY command to create a new8display device with the appropriate node, transport, andserver values.&&/"01`n.NAMENOTFOUND, named value not found in deviceif for OpenVMS/The requested named value has not been defined.None.''/")x1`n.NOACCESSPROXY, unable to access proxy managerif for OpenVMS(The proxy manager could not be accessed.>Check that the proxy manager has been started. Verify that the;node name, transport, and port number for the proxy manager are correct.:If the proxy manager is on a remote host that uses another>operating platform, check that the proxy manager allows access;from this host and does not require further authentication.8Correct the underlying problem, and reenter the command.(([:"t1kym9NOCLIENT, DECwindows Motif client software not installedif for OpenVMS=The specified DCL command qualifier requires the installation5of DECwindows Motif for OpenVMS Version 1.3 or later.:Ask your system manager to install the appropriate version9of DECwindows Motif, or avoid using the specified command qualifier.))C"D1tBNOPMCONN, cannot open a connection to the proxy manager, 'string'if for OpenVMS:An error occurred while attempting to connect to the proxymanager.=Take action based on the accompanying message. Check that theneeded, then use the SHOW DISPLAY/VALUE command to verify thatthe value is correct.11D"{1uCXAUTHNOTUPD, authorization entry not removed from X authority fileif for OpenVMS9The generated authorization key was revoked; however, the:associated entry could not be removed from the X authorityfile.=Use the XAUTH command to view the contents of the X authority>file. If the authorization entry is found, remove it using the=XAUTH REMOVE command. Otherwise subsequent connections to theX server will be prevented.225"1ft.4NOSECURITY, the SECURITY extension is not availableif for OpenVMS;This message indicates that the SECURITY extension to the X=server is not available or that a client attempted to connect:to the X server using a generated, untrusted authorizationkey.:Check the definition of the logical DECW$SERVER_EXTENSIONS=in the DECW$PRIVATE_SERVER_SETUP.COM file and verify that the+extension has been enabled on the X server.33)"1Zh(NOSERVER, could not connect to X serverif for OpenVMS;An error occurred while attempting to generate or revoke an=authorization key. The key could not be generated or revoked,2because the connection to the X server was denied.9Check that the node, transport, and server values for the;display device are correct. Check that the user has a valid>authorization entry in the X authority file and that it grants6the appropriate permission to connect to the X server.44^7"*1hvFp6DEVNOTCREATED, device was not created by this processif for OpenVMS>The display device specified in the SET DISPLAY/DELETE command7is a supervisor-mode device that was not created by the;current process. This display device can only be deleted bythe process that created it.=Check that the correct device name was specified, and reenter8the command from the process that originally created the=device. Note that supervisor-mode display devices are deletedThe SET DISPLAY command was used to initiate a connection to a>Low-Bandwidth X (LBX) proxy server. An authentication protocol>for the server was found or specified without any accompanying/authorization data (from the X authority file).;Reenter the command using the /LBXDATA qualifier to specify9the appropriate authorization data (such as a valid magic8cookie). If the current authentication protocol does not5require additional data, any valid value can be used.77A"1r @XAUTH_LOCKED, the X authority file is locked by another processif for OpenVMS4The SET DISPLAY command could not save the generated:authorization key in the X authority file because the file/is currently locked for use by another process.>If the X authority file is locked for editing or reading by an>active process (such as by someone using xauth in command mode>to edit the file), wait for the process to complete its use of.the file, and reenter the SET DISPLAY command.:If the lock on the file is stale (such as from an abruptly9terminated process), use the XAUTH -b command to manually6release the lock, and reenter the SET DISPLAY command.88IFF, DIFFERENCES CoB*G1[`)SYSFAOERR, unexpected error from SYS$FAOmmand=An unexpected error occurred during a call to the $FAO systemservice.Contact HP Customer Support.99z]Q1?MAXDIF, maximum number of difference records encountered - DIF abortedmmand:The number of differences that have been found exceeds the7number that was specified with the /MAXIMUM_DIFFERENCES9qualifier. Therefore, the Differences utility terminated,;listing only those difference records it encountered beforereaching the maximum.None.::mf)H1 CMRGGTMTCH, value of 'x' for /MERGE is greater than /MATCH value of! 'y' /MERGE set to 'y'mmand(A /MERGE value exceeds the /MATCH value.9Decrease the /MERGE value to be less than or equal to the /MATCH value.;;/501`e.CMDLIN, command line segment in error 'error'mmand4Part of the command line is syntactically incorrect./Specify the correct syntax in the command line.<<v ,1QVFILAREDIF, files are differentmmand+The two files being compared are different.None.==6B1gl5STRCPYERR, unexpected error from string copy routinemmand6An unexpected error occurred during an RTL string copy operation.Contact HP Customer Support.>>!9\1RW CMDSYNTAX, command syntax errormmand8The syntax of the DIFFERENCES command line is incorrect.9Use the DCL command HELP to determine the correct command!syntax, then reenter the command.??m,K1CPARGTMTCH, value of 'x' for /PARALLEL is greater than /MATCH value( of 'y', /PARALLEL set to 'y'mmand+A /PARALLEL value exceeds the /MATCH value.1af/TOOMNYFIL, more than two input files specifiedmmand$Too many input files were specified.=Reenter the command, specifying no more than two input files.BBO1PUSAMEFILE, files are identicalmmand6This success message confirms that the two files beingcompared are identical.None.CC 6>1gl5INSVIRMEM, insufficient virtual memory - DIF abortedmmand=The Differences utility has run out of virtual memory because=it either (1) encountered a difference section that contains>more records than can be stored in virtual memory, or (2) ranIn the first case, reduce the size of the offending difference:section; the listing will have terminated in the middle ofIn the second case, rerun the Differences utility and generateone listing at a time.DD6{1gl5NOLOWVER, no lower version of file 'file-spec' foundmmand8The Differences utility cannot default the revision file9specification because no lower version of the master fileexists.4Check whether you correctly specified the file name.specification if it has a name different from the master file.EElH1DTWOWIDTHS, /WIDTH and /LINE_WIDTH are redundant - /LINE_WIDTH value& ignored, /WIDTH value usedmmand:Both /WIDTH and /LINE_WIDTH were specified; /LINE_WIDTH is unnecessary.None.FFSM, DISMOUNT Comma;0Lc1ac/SYSDEV, the system device cannot be dismountedndCorrect the device name (or logical name, if a logical name is#specified) and reenter the command.GGL/+01`b.CANNOTDMT, 'device-name' cannot be dismountednd*The specified device cannot be dismounted./Take action based on the accompanying messages.HHQ7.V1hj6MARKEDDMT, 'device-name' has been marked for dismountnd9When a device is marked for dismount, the volume dismount8completes as soon as the last open file on the volume is>closed. The DISMOUNT/CLUSTER/OVERRIDE=CHECKS command dismounts>the volume on nodes that have no files open on the volume, andSpecify a member of a shadow set or do not use this qualifier.JJW V@01@DSMCLUFAIL, dismount/cluster failed on one or more nodes in the clusternd7One or more nodes in the cluster failed to dismount thedevice./Take action based on the accompanying messages.KK[WS1?OPT_WBM_MERGE, shadow set requires a merge, continuing without bitmapnd>A merge was in progress when the command was executed. Because:the qualifier /POLICY=MINICOPY=OPTIONAL was specified, the>DISMOUNT operation completed, but no write bitmap was started.>A shadow set must be consistent before a member can be removedto start a write bitmap.>None. The device was removed successfully even though no writebitmap was started.LL_DR@1uw CREQ_WBM_MERGE, unable to start bitmap, shadow set requires a mergend;The command specified the /POLICY=MINICOPY qualifier, but amerge is in progress.6Allow the merge to complete; then reissue the DISMOUNTcommand.MMc:v1km9WBM_NOTAVAIL, unable to start bitmap, subsystem disablednd=One or more nodes in the cluster is not write bitmap capable.7This condition has disabled the write bitmap subsystem.the write bitmap could not be started by the shadowing driver.-However, the member was successfully removed.8This message likely indicates a memory resource problem.;None required. The member was successfully removed and will.require a full copy to be returned to the set.7However, to learn why the write bitmap failed to start,=DISMOUNT the shadow set member by specifying /POLICY=MINICOPY:(that is, without the =OPTIONAL keyword). The failure code-from shadowing will be displayed by DISMOUNT.OOu*A1[]-)SPOOLEDEV, 'n' devices spooled to volumend8The specified number of devices are being spooled to thevolume.:Stop the queues that are being spooled to the disk and use=the /NOSPOOL qualifier on the SET DEVICE command to reset thedevices in the queue.PP?e 1pr>SRCMEM, only source member of shadow set cannot be dismountednd;An attempt was made to dismount a shadow set member that is(the only valid source member of the set.4If there is only one shadow set member, it cannot beThe specified number of user files are open on the volume thatis to be dismounted.;Close all the open files on the volume. Use the SHOW DEVICE=command with the /FILES qualifier to verify that all files onthe volume have been closed.TT +B^1\^*INSTIMAGE, 'n' images installed on volumend9The specified number of images have been installed on thevolume.=Use the Install utility's REMOVE or DELETE commands to removeor delete the installed images.UU 1i01bd0FILESOPEN, volume has files open on remote nodend8The volume on the remote node has files open. You cannot/dismount the volume until all files are closed./Close the files or request that they be closed.VV 7N=1hj6INSWPGFIL, 'n' swap or page files installed on volumend>The specified number of swap or page files have been installedon the volume.ADVADVERSEND, multicast error while advertising clearinghouseuted Name Service (DECdns).o1o=ADVBADFORMAT, bad advertisement message received from deviceuted Name Service (DECdns)An internal error occurred in the DNS$ADVER process. The imagemight be corrupt.Contact HP Customer Support. Manual for$an explanation of foreign commands.)9This account requires that all images are run using verbs>defined in the CLI table (called DCLTABLES) specified for thisaccount.ist.n}}nDSR, DIGITAL Standar3'#1X`&PROCFILE, processing file 'file-name'd Runoff"DSR has begun processing the file.None.n B ?f=1px>DOESNTFIT, 'string' will not fit at current indentation leveld Runoff;The specified string will not fit on a line with the proper)indention of the index entry or subentry.If possible, keep a copy of the file that caused the error andcontact HP Customer Support.n1BJTEXTD, 'string'd Runoff8This message accompanies one or more other messages that;describe an error condition. This message displays the text(being processed when the error occurred.Correct the source file.nb&1NVTEXTD, entry text: 'string'd Runoff9The indicated index entry caused this error. This message'accompanies one or more other messages.%Correct the entry in the source file. n (1Ya'IDENT, DSRTOC version 'version-number'd Runoff:This message, displayed when the /IDENTIFICATION qualifier:is specified, shows the version number of the DSR Table ofContents utility.None. n '01X`&EMPTYIN, empty input file 'file-name'd Runoff/The input file contains no data for processing.Edit the input file. n*61[c)TOODEEP, maximum subindex depth exceededd Runoff5The number of levels of subindex entries is exceeded.Check the subindex entries. n3.1dl2NOINDEX, no index information in file 'file-name'd Runoff-The specified file contains no index entries.Check the input file. nz 21LTIGNORED, 'string' ignoredd Runoff1DSR ignored a character string during processing.None.n//n1`h.BADVALUE, 'value' is an invalid keyword valued Runoff.An invalid value is specified for the keyword.8Check the command string for a spelling or syntax error.4Verify the values or syntax and reenter the command.n$.1U]#NOLIST, parameter list not allowedd Runoff-The command does not accept a parameter list.Eliminate the parameter list.n4*:1em3INVRECORD, invalid record type in file 'file-name'd Runoff)The file contains an invalid record type.9Make sure that the file contains the correct record type.n(J1Ya'COMPLETE, processing complete 'string'd Runoff=The DSR Table of Contents utility has processed the indicated input file.None.n(-&1Ya'TRUNCATED, string too long - truncatedd Runoff,A string is too long and has been truncated.%Edit the file and shorten the string.nTK, DECtalk Facilit (.1YZ'OFFHOOK, telephone is offhook (active)y-The phone is off the hook (a call is active).None.n k]1KLINVARG, invalid argumenty>Either your program specified an invalid argument or the value+of an argument is not in the correct range.:Correct the program to specify a valid argument or a value!that is within the correct range.n-b1^_,WINK, a wink was detected on the phone liney>A wink (a possible timeout) is detected on the phone line. The"caller may have hung up the phone.None.n 6V1gh5ERRPHOTRA, phonemic transcription error was detectedy7A phonemic transcription malfunction occurred after theDECtalk device was turned on.Check the DECtalk hardware.n 8`1ij7CONSEQERR, a control sequence malfunction was detectedy=A DECtalk private control sequence malfunction occurred since!the DECtalk device was turned on.Check the DECtalk hardware.np%%1VW|$NOT_A_TRM, device is not a terminaly$The output device is not a terminal.None.n!+7!1\]*NOTLCLTRM, device is not a local terminaly6The output device is not a terminal on the local node. Specify a local terminal device.n"*1NOyINVVOI_ID, invalid voice-idy)An invalid voice identifier is specified.>Ensure that the voice identifier is being passed by reference,A DTK$ input routine could not parse an escape sequence passedto it.Contact HP Customer Support.""na8N31ij7NODIATONE, no dial tone was detected on the phone liney;DTK$DIAL_PHONE is called to dial a phone number and no dialtone is detected.2Correct the telephone line problem and call again.##n| #1TUq"FATERRLIB, fatal error in libraryyAn internal error occurred.Contact HP Customer Support.$$n /V1`a.INPBUFOVR, input buffer overflow was detectedy7An input buffer overflow malfunction occurred after theDECtalk device was turned on.Check the DECtalk hardware.%%n!91RS TIMEOUT, a timeout has occurredy8This message indicates that the output device timed out.None.&&n )O1Z[(DECTSTFAI, a local self-test has failedy8A local self-test malfunction occurred since the DECtalkdevice was turned on.Check the DECtalk hardware.''n.=d1_`-NOROOM, no room in dictionary for definitionyCheck your output string to determine which escape sequence issequence, this facility has probably already defined a routineto perform that function.,,n/N1`a.COMFAIL, a communication failure was detectedy>A communications malfunction occurred since the DECtalk devicewas turned on.Check the DECtalk hardware.--n A/H1rs@FILTOOLON, file-specification is too long (over 255 characters)y.The file specification exceeds 255 characters.;Correct your program to request a file name of 255 or fewer characters...nR4N1efd3VOIALREXI, voice_ID already exists for this devicey;A user tried to create a new voice identifier for a DECtalk;device when one already exists. This is normal in a modular7environment. The existing voice identifier is returned.=None. Make sure you do not delete a voice identifier that youdid not create.//n4v1ef3NOMALFUN1, no malfunctions detected since power upy>This message indicates that no malfunctions occurred since the6DECtalk device was turned on. This is the first reply.None.00n41ef3NOMALFUN2, no malfunctions detected since power upy:This message indicates that no malfunctions occurred since=the DECtalk device was turned on. This is the second or laterreply.None.11n4D1ef3NOANSWER, no answer was detected on the phone liney:DTK$DIAL_PHONE is called to dial a phone number and no oneanswers.Call again later.22n.J1_`-NVROPRFAI, the last NVR operation has failedy>An NVR operation failure occurred since the DECtalk device was turned on.Check the DECtalk hardware.33nR, DECnet Test Rec )1F1Z_(BADFUNC, invalid function type receivedeiver0The test program has a protocol incompatibility.9Run the test against a compatible version of DTRECV or an equivalent.44ni ;1lq:DTRBADMAIL, unexpected mail received, type is 'mail-type'eiverThe logical link is broken.Retry the operation.55n~'%01X]&BADPAT, invalid data pattern receivedeiver$This message describes a test error./Retry the test and contact HP Customer Support.66n+%1\a*BADSEQNUM, invalid data sequence receivedeiver$This message describes a test error.Retry the test.77n)1F1Z_(BADSUBFCN, invalid subfunction receivedeiver0The test program has a protocol incompatibility.9Run the test against a compatible version of DTRECV or an equivalent.88n:1F1kp9INVOPTION, non-supported flow control parameter receivedeiver0The test program has a protocol incompatibility.9Run the test against a compatible version of DTRECV or an equivalent.99n'%1OT{BADUSRDAT, invalid user dataeiver&Bad user data has caused a test error.$Correct the data and retry the test.::n S, DECnet Test SenFi(1wz EINVTIME, invalid test duration; specify maximum of 3,600,000 secondsder;A test duration in a DATA test is invalid. The maximum test,duration is 3,600,000 seconds or 1000 hours.'Retry the test using a valid test time.;;n' $>1KNrCONTYP, conflicting typeder#An invalid test type was specified.=Use DTSEND HELP to determine valid test types, and try again.<<nPE1ORBADMAIL, bad mailbox messageder>nn$1K1UX#UNREC_QUAL, unrecognized qualifierder0The command line contained an invalid qualifier.=Use DTSEND HELP to determine the correct qualifier, and retry the command.??nr,F1PSUNREC_VERB, unrecognized verbder+The command line contained an invalid verb.Use DTSEND HELP to determine the required value, and retry thecommand.FFn5@1fi4BADUSRDAT, user data does not match in CONNECT testder9The user data returned by DTR does not match in a CONNECTtest.Retry the test.GGn<N1mp;BADUSRLEN, user data length does not match in CONNECT testder=The length of the user data returned by DTR does not match ina CONNECT test.Retry the test.HHnw %1QTyBADDATDAT, data echoed invalidder$This message describes a test error.Retry the test.IIn*%1[^)BADDATLEN, not enough data sent/receivedder$This message describes a test error.Retry the test.JJn>;31or=INVSIZE, invalid message size; specify a size from 0 to 4096der:An invalid data message size was specified in a DATA test.2Specify a value from 0 to 4096 and retry the test.KKn%(H1VY$INVSNTX, invalid syntax encounteredder'DTS detected an invalid command syntax.>Use DTSEND HELP to determine the correct syntax, and retry thecommand.LLnUMP, DUMP Command -!1^^,DEVQUALS, invalid qualifier for device typeIm1oo%=BADSTART, starting block beyond maximum legal block 'number'must be passed by value, and some must be passed by reference.=Check the documentation to ensure that you correctly pass theright number of parameters.VVna1LRDEFAULTFONT, default fontiewer)=The CDA Viewer could not load a specified font so it is using"a default font (12-point Courier).6If you are using the CDA Viewer application, check for8diagnostic error messages in the CDA Viewer's DiagnosticInformation dialog box.;If you are using the DVR callable widget interface, specify3a callback to a viewer widget instance and look for:DvrCRcdaError callback reasons in your callback procedure.must be in the DECW$SYSTEM_DEFAULTS: directory. This error can;occur if you have an incorrect version of a UID file in the system area.YYn?I1pv>DRMPOPUPFETCHFAIL, DVR routines could not fetch pop-up windowiewer)8An attempt to fetch one of the CDA Viewer's popup dialogwindows failed.must be in the DECW$SYSTEM_DEFAULTS: directory. This error can;occur if you have an incorrect version of a UID file in the system area.\\n^1GMEOD, end of documentiewer):The end of the document has been reached. Attempts to move"forward in the document will fail.None.]]n(%1Y_,'FATALERROR, fatal error, submit an SPRiewer)$An unrecoverable error has occurred.9Check routine parameters to ensure that they are properly9called. If everything appears normal, contact your Compaq3account representative or your authorized reseller.^^n7^1PVIFILENOTOPEN, file is not openiewer)Ensure that you call the routines needed to open a file beforetrying to manipulate the file.__n2_E1ci 1FORMATERROR, formatting error in diagnostic infoiewer)>The CDA Viewer has issued a diagnostic error message regardingthe DDIF content of a document.;If you are using the CDA Viewer application, you can access>the diagnostic information by using the Diagnostic Information$option under the File pulldown menu.7If you are using the callable viewer widget, specify an9Activate Callback procedure and examine the callback data1when you receive a DvrCRcdaError callback reason.``n7gE1hn6FORMATINFO, formatting information in diagnostic infoiewer)the diagnostic information by using the Diagnostic Information$option under the File pulldown menu.7If you are using the callable viewer widget, specify an9Activate Callback procedure and examine the callback data1when you receive a DvrCRcdaError callback reason.aan3aE1dj2FORMATWARN, formatting warning in diagnostic infoiewer)6The CDA Viewer has issued a diagnostic warning message)regarding the DDIF content of a document.;If you are using the CDA Viewer application, you can access>the diagnostic information by using the Diagnostic Information$option under the File pulldown menu.7If you are using the callable viewer widget, specify an9Activate Callback procedure and examine the callback data1when you receive a DvrCRcdaError callback reason.bbn`Cu1tzrBGRAPHICFAIL, error processing graphic information, cannot displayiewer)IMAGEFAIL, error processing image information, cannot displayiewer)=The document contains invalid or unsupported image data. Some7image features are not yet supported by the CDA Viewer.fails again, you may require a system with more memory to viewthe requested document page.ggn+@01\b*MEMDEALLOFAIL, memory deallocation failediewer)7The CDA Viewer's attempt to give back system memory hasfailed./Ensure that the system is functioning properly.hhnt$<1U[#NODISPCONT, no displayable contentiewer);The DDIF document does not contain any displayable content.>If you are using the character-cell CDA Viewer, try converting7the file to PostScript output or view the file with the;windowing CDA Viewer to check whether the document containsStarting with Version 1.2-6, the CDA Viewer no longer supports;the Display PostScript Extension used to display PostScriptfiles.9If you have this option, set the display to a server that=still supports the Display PostScript Extension and retry the operation.jjn 1KQ#2NOFONT, cannot load fontiewer)>The CDA Viewer cannot load a specified font. If an applicationset the page length to 24 or more rows. On nonvideo terminals,any page length is acceptable.uun @1qq?INSFANL, insufficient data in Definition and/or Analysis files=The FDL editor is executing an optimize script invoked by the=/NOINTERACTIVE qualifier. Certain information is missing from)the definition file or the analysis file.1Supply the missing information by reexecuting the=ANALYZE/RMS_FILE/FDL command to produce another analysis file4and/or use the analysis file as the definition file.vvn 6<1gg5DEVCLASS, device class of SYS$INPUT must be terminal;EDIT/FDL cannot interact with a file, only with a terminal.6Do not invoke EDIT/FDL from a batch job. If you invoke6EDIT/FDL from an interactive command file, include the9following line immediately before the EDIT/FDL command inthe command file:3 $ ASSIGN/USER 'F$LOGICAL("SYS$OUTPUT")' SYS$INPUTwwn5IT/FDL11111EDF, FDL Editorxxn T Editor /1@@Invalid string;You specified a string that EDT cannot handle. For example,defined in the CLI table (called DCLTABLES) specified for thisaccount.ist.b_ EDT Editor ,11NNzInvalid value in SET command+The EDT command SET has an invalid keyword.0Reenter the command, specifying a valid keyword.( Y21YY'Sequence number must be less than 655366The number specified as the :integer specifier for the!/SEQUENCE qualifier is too large.1Reenter the command, specifying a smaller number. ! rU1RR Error opening terminal for input8EDT cannot access the specified terminal for input. This8message appears when EDT is used from a running program.5After determining why EDT cannot access the specifiedterminal, correct the problem.  " sU1SS!Error opening terminal for output9EDT cannot access the specified terminal for output. This8message appears when EDT is used from a running program.5After determining why EDT cannot access the specifiedterminal, correct the problem.E  -1OO*WError reading from input fileterminal. This message appears when EDT is used from a runningprogram.7After determining why EDT cannot process input from the(specified terminal, correct the problem.  N1NN-Error writing to output filecharacters present when the editing session ends. This messageindicates an EDT problem.The EDT limit on the size of its work file (65,535 blocks) was exceeded.=Use the CLEAR command to delete a buffer when it is no longer>needed. This precaution also helps reduce the size of the work!file on systems with small disks.  K@1OOAdvance past bottom of buffer:An attempt was made to move the cursor past the end of thebuffer ([EOB]).9Press the up arrow key to move the cursor above the [EOB]mark.   /1PP)Write file could not be closed=EDT opened the output file and copied the text specified with=the WRITE command into that file. However, for some reason at-the system level, EDT cannot close that file..Take action based on the accompanying message.! 81QQ]Write file could not be created=EDT cannot create the output file with the file specification9supplied with the WRITE command. This error can be caused;by problems in the file name itself (either it has too many9characters or an invalid character). Other causes include8problems in the directory specification, if one was used<(either the directory does not exist, you do not have access;to it, or the directory specification format is incorrect).=This message could also mean that there is a problem with the-file system, such as insufficient disk space.7After determining the cause of the problem, correct it.& 661HH~I/O error on work file5EDT cannot access its text storage area for the file.5Take action based on the accompanying system message.( /1PP/Print file could not be closed=EDT opened the output file and copied the text specified with=the PRINT command into that file. However, for some reason at3the system level, EDT is unable to close that file..Take action based on the accompanying message.~) /1QQaPrint file could not be created=EDT cannot create the output file with the file specification=you supplied with the PRINT command. This error can be caused;by problems in the file name itself (either it has too many9characters or an invalid character). Other causes include8problems in the directory specification, if one was used<(either the directory does not exist, you do not have access;to it, or the directory specification format is incorrect).=This message could also mean that there is a problem with the-file system, such as insufficient disk space..Take action based on the accompanying message.).+ W1\\;*Unexpected characters after end of command9The command you entered ends with a string of one or more;characters that is not part of the command. The rest of thecommand is valid.=Reenter the command, removing the invalid characters from theend of the command line.7 ! t(1RR Could not align tabs with cursorThe EDT command DEFINE is incomplete; either MACRO or KEY must be specified.=Reenter the command, specifying either DEFINE MACRO or DEFINEKEY.K* `J1[[)Cannot set terminal type from change mode7You attempted to enter a SET TERMINAL {VT100|VT52|HCPY}'command while working in a screen mode.>To change the terminal type with the SET TERMINAL command, use line mode.U= 1nna buffer. EDT stops accepting additional lines when it reaches this limit.None.PVN M1b?Max line number exceeded; lines no longer ascending; resequence recommended9EDT reached the limits of its line numbering capacity. If=lines continue to be added to your buffer, EDT will no longerable to number them uniquely.>The buffer should be resequenced if there are fewer lines than line numbers.W- +11^^,Max number of lines for this buffer exceeded*No more lines can be added to this buffer.0Place any remaining lines in a different buffer. [ ! vV1RR Include file could not be closed;You specified the a file using the INCLUDE command that EDT9could not close. Some problem exists at the system level.7After determining what system problem prevents EDT fromclosing the file, correct it.\ ! YV1RR Include file could not be openedEDT does not recognize or support the command you entered. You+may have incorrectly specified the command.1Check the command syntax and reenter the command.l  `1@@CTRL/C ignored>You attempted to use Ctrl/C to interrupt an EDT operation that EDT does not allow you to abort.None.l >:1MMUnrecognized command option=The command you entered includes an invalid option/qualifier.9Reenter the command, specifying a valid option/qualifier. Pq0 v1aab/Change mode can be entered only from a terminal>Change mode (keypad, nokeypad, or hardcopy change mode) cannot=be entered from a network, a batch command file, or a startup command file.:Use the EDT command SET MODE CHANGE in the startup file to:make EDT enter change mode at the end of the startup file.!!t  `?1OOHelp file could not be closed;You specified a help file that EDT is unable to close. Some#problem exists at the system level.>After determining the cause of the system problem, correct it.""\u  1OOnHelp file could not be opened;The requested EDT Help file cannot be accessed. An error in>system storage occurred (for example, improper installation ofthe operating system).7Verify that the logical name EDTHELP (with a default of9SYS$HELP:.HLB) designates the EDT Help file, and that thefile has not been damaged.##Xv ) Y1ZZj(Help File Index could not be initializedEDT has been revised to enable users to edit sequence-numbered=files and to retain the sequence numbers for future work. The:new capabilities replace the original line number feature.None.&& Q"1KKThat key is not definable6The key selected for the EDT command DEFINE KEY is notavailable for definition.!Select a different key to define.'' /1QQOutput file could not be closed:EDT opened the output file and copied the MAIN buffer text=into that file. However, for some reason at the system level,EDT cannot close that file..Take action based on the accompanying message.((! 81RRl Output file could not be created=EDT cannot create the output file with the file specification;supplied with the EXIT command. This error can be caused by8problems in the file name itself (either it contains too;many characters or it contains an invalid character). Other:causes include problems in the directory specification, if=one was used (either the directory does not exist, you do not;have access to it, or the directory specification format isthe ends of lines). This message is only a warning. EDT allows=editing of the file, but difficulties can arise if you try toedit the nonstandard elements.None.22(! /1RR : Journal file could not be closed>You used the /RECOVER qualifier in your EDIT/EDT command line,1KKBackup past top of buffer;An attempt was made to move the cursor above the first line(top) of the buffer.=Press any key to move the cursor below the top of the buffer.99* F51[[)String delimiter must be non-alphanumeric:A letter, digit, or percent sign (%) was used as a string delimiter.4Reenter the command, using a valid string delimiter.:: ?`1FFString was not found7The string defined in the range specification cannot befound.:Verify that EDT is searching in the expected direction and$that the string was typed correctly.;;v  ;1GGFile attributes error:EDT cannot edit the file because of the file's attributes.None.<<  `(1MMFile specification required=A file name (or file specification) was not specified with an!INCLUDE, PRINT, or WRITE command.'Reenter the command, specifying a file.==B q1FFTParenthesis mismatch=The number of right parentheses [)] does not match the number=of left parentheses [(]. This error occurs when a change mode command string is being entered.:Modify your change mode command string to include an equal5number of properly nested left and right parentheses.>>( 1YY'Keys cannot be defined in Nokeypad mode6The nokeypad DEFK command reassigns the key definition;function only in keypad mode to a key other than Ctrl/K; it cannot be used to redefine keys.None.?? wL1HH Parsing stack overflow=The command you entered caused the memory space for the parse8data to be filled before the command could be validated.>Check your command string. If it is valid, reenter the command in segments.@@i  1EE{Insufficient memory:There is insufficient memory to complete the last command.1JJCommand buffer exhausted:The string of change mode commands exceeds 255 characters.=Divide the string into several lines and reenter the command.CC9 l1jj8Command buffer exhausted during XLATE command processing>There are too many characters in your XLATE procedure. EDT can,handle only 255 characters per command line.Enter fewer characters.DD! +/1RR} Command file could not be closed*The startup command file cannot be closed..Take action based on the accompanying message.EE ' 731XX&Destination for MOVE or COPY not found6The range specification in the command does not exist.2Reenter the command, specifying an existing range.FF! A/1RR Command file could not be opened8The command file specified in the command line cannot beopened..Take action based on the accompanying message.GG Ze1MM Command file does not exist=The command file parameter in the command line does not existin the specified directory.=Reenter the command, specifying a command file parameter that&does exist in the specified directory.HH A1CCAborted by CTRL/C 111oo=No more than 65535 lines can be processed in a single command0You specified a range that exceeds 65,535 lines.0Reenter the command, specifying a smaller range.OO ><1EENo output file name=You used the EDT command EXIT without specifying a file name.;Reenter the command, specifying a file name, or enter QUIT.PP eF1HHNo output file written=You attempted to put text into an output file, but EDT cannot&handle the record format of that text.9Change the record format of the file, if possible, before editing it.QQ *11NNxSearch string cannot be null)The search string contains no characters.0Reenter the command, specifying a search string.RR RJ1HHNo select range active:You did no create a select range prior to entering the EDTcommand APPEND or CUT.>z No such line;There are no original line numbers for the specified range./Ensure that a specified range has line numbers.TT , 1]]+Record too big, truncated to 255 characters=You attempted to edit or include a file that has lines longer=than 255 characters. EDT deleted all characters from position<256 on because EDT line length is limited to 255 characters.None.UU M1LL`Select complete lines only9You used the SELECT line range specifier with a line mode>command such as COPY, FILL, MOVE, PRINT, TAB ADJUST, or WRITE.9However, the active select range had at least one partialIf you are using the character-cell CDA Viewer, try converting7the file to PostScript output or view the file with the;windowing CDA Viewer to check whether the document containsStarting with Version 1.2-6, the CDA Viewer no longer supports;the Display PostScript Extension used to display PostScriptfiles.9If you have this option, set the display to a server that=still supports the Display PostScript Extension and retry the operation.jjn 1KQ#2NOFONT, cannot load fontiewer)>The CDA Viewer cannot load a specified font. If an applicationset the page length to 24 or more rows. On nonvideo terminals,any page length is acceptable.uun @1qq?INSFANL, insufficient data in Definition and/or Analysis files=The FDL editor is executing an optimize script invoked by the=/NOINTERACTIVE qualifier. Certain information is missing from)the definition file or the analysis file.1Supply the missing information by reexecuting the=ANALYZE/RMS_FILE/FDL command to produce another analysis file4and/or use the analysis file as the definition file.vvn 6<1gg5DEVCLASS, device class of SYS$INPUT must be terminal;EDIT/FDL cannot interact with a file, only with a terminal.6Do not invoke EDIT/FDL from a batch job. If you invoke6EDIT/FDL from an interactive command file, include the9following line immediately before the EDIT/FDL command inthe command file:3 $ ASSIGN/USER 'F$LOGICAL("SYS$OUTPUT")' SYS$INPUTwwn5IT/FDL11111EDF, FDL Editorxxn T Editor /1@@Invalid string;You specified a string that EDT cannot handle. For example,defined in the CLI table (called DCLTABLES) specified for thisaccount.ist.%|^+ZELV, Error Log Viewe9k1jkX8B2TNOTFND, valid bit-to-text translation data not foundr8Valid bit-to-text translation data was not found for the:entire current error log event. This could result from anyof the following conditions:;o Bit-to-text translation of the current error log event is not supported.-o An invalid error log event was encountered.;o There is an error in the bit-to-text translation data for the current error log event.ENDEVENT, end of event unexpectedly encountered in 'filespec'r;The end of an error log event was unexpectedly encountered.Contact HP Customer Support.!c1RS ENTFND, bit-to-text entry foundr7Matching bit-to-text translation data was found for the*current error log bit-to-text table entry.None.B(x1YZT'ENTNOTFND, bit-to-text entry not foundr:No matching bit-to-text translation data was found for theCorrect the cause of any error that was signalled prior to theprogram's termination.%%1VW|$FILCLSERR, error closing 'filespec'r$The specified file cannot be closed.6Verify that the file is still accessible and retry the8command. If the file is accessible and the command still#fails, contact HP Customer Support. &#?1TU8"FILNAMERR, error parsing filespecr/An error was encountered while parsing the filespecification.;Verify that the file specification is correct and retry the=command. If the file specification is correct and the command)still fails, contact HP Customer Support.  (-1YZ'FILNAVERR, error navigating 'filespec'r,An error occurred while navigating the file.6Verify that the file is still accessible and retry the8command. If the file is accessible and the command still#fails, contact HP Customer Support. %1VWr$FILOPNERR, error opening 'filespec'rThe file cannot be opened.6Verify that the file is still accessible and retry the8command. If the file is accessible and the command still#fails, contact HP Customer Support. ):1Z[)(FILRDERR, error reading from 'filespec'r9An error occurred while attempting to read from the file.6Verify that the file is still accessible and retry the8command. If the file is accessible and the command still#fails, contact HP Customer Support. '91XY&&FILWRERR, error writing to 'filespec'r8An error occurred while attempting to write to the file.6Verify that the file is still accessible and retry the8command. If the file is accessible and the command still#fails, contact HP Customer Support.\]1DINVB2TENT, invalid bit-to-text entry at symbol 'sequence-number' in 'filespec'r9An invalid bit-to-text table entry was encountered in the"bit-to-text translation data file.Contact HP Customer Support.nX1BINVB2TFLD, invalid bit-to-text field at symbol 'sequence-number',* field 'field-ID' in 'filespec'r;An invalid bit-to-text field was encountered in the bit-to-text translation data file.Contact HP Customer Support.[V1CINVB2TNOD, invalid bit-to-text node at symbol 'sequence-number' in 'filespec'r>An invalid bit-to-text node was encountered in the bit-to-texttranslation data file.Contact HP Customer Support.]Y1EINVB2TSYM, invalid bit-to-text symbol at symbol 'sequence-number' in 'filespec'rELV cannot obtain a valid date and time from the system or thecurrent error log event.Contact HP Customer Support.2[n1cd-1INVERLEVT, invalid error log event in 'filespec'rD1gh5MEMALLERR, error allocating 'number' bytes of memoryr=An error was encountered while attempting to allocate memory.:Increase the memory available to the process and retry thecommand. \1QRNODFND, bit-to-text node foundr7Matching bit-to-text translation data was found for the#current error log bit-to-text node.None.:'q1XYL&NODNOTFND, bit-to-text node not foundr:No matching bit-to-text translation data was found for the>current error log bit-to-text node. This could result from anyof the following conditions:;o Bit-to-text translation of the current error log event is not supported.-o An invalid error log event was encountered.;o There is an error in the bit-to-text translation data for the current error log event.,1op=UNSFILFMT, unsupported file format encountered in 'filespec'r+An unsupported file format was encountered.>If the file is a converted error log file or an error log file:created on a version prior to OpenVMS Version 7.2, use the>DCL command ANALYZE/ERROR_LOG to translate the error log file.EVTTOOLRG, 'number'-byte error log event too large to convertr;The event cannot be converted because the size of the error.log event exceeds the maximum RMS record size.None.!!2NCRYPT, ENCRYPT or ?#11p1>AESDECERR, error during AES decryption, SSL status = 'status'DECRYPT Command0An error occured in the SSL AES decrypt routine.:If the SSL shareable images are installed, the error mightAESENCERR, error during AES encryption, SSL status = 'status'DECRYPT Command0An error occured in the SSL AES encrypt routine.:If the SSL shareable images are installed, the error mightis DES. When using AES, specify a key created with and for AES;encryption, and use AES encryption for both the key and thedata algorithm. For example:3 $ ENCRYPT /CREATE_KEY /AES MyAESKey "My AES key -9 _$ that must be at least 16, 24, or 32 bytes in length"0 $ ENCRYPT MYFILE.TXT MYAESKEY /KEY=AESCBC192 -' _$ /DATA=AESCBC192 /OUTPUT=MYFILE.ENC&&#F&1P_AESNODATA, no data to encryptDECRYPT CommandAESNOFUNC, that function is not currently implemented for AESDECRYPT Command7The attempted function is currently not implemented for6Advanced Encryption Standard (AES); it applies to Data,Encryption Standard (DES) only at this time.A message authentication code (MAC) has been calculated for anexisting file.'None. This is an informational message.,,8#_(1ix7AUTHMATCH, file 'file-spec' successfully authenticatedDECRYPT Command;The computed message authentication code (MAC) for the file"matches the previously stored MAC.'None. This is an informational message.--MB#T1s _AAUTHMISM, file authentication code mismatch for file 'file-spec'DECRYPT Command>The contents of the file have changed because the MAC does not>match the one stored in the database. This could indicate file tampering.8First, check the contents of the file; then make sure itbelongs in your directory...V#v1 @CONINIERR, unable to initialize the work area for the algorithm selectedDECRYPT Command=The context and work area contain inconsistent check data and7are assumed to be corrupted or incorrectly initialized.%Verify that the following took place:The context and work area supplied to the encryption primitive8routine was not long enough for the encryption primitive;routine to operate. This error is expected only if you makeVerify that the symbol used as the size of the context area is>correct for the selected algorithm and that the resulting size>reflects the minimum requirements for the encryption primitiveroutine.00&-#Yr1^m8,CONNOTINI, context area not yet initializedDECRYPT Command4The Context Block has not been initialized by either#ENCRYPT$INIT or ENCRYPT$K_FNC$INIT.7Check your program to be sure that the Context Block is9initialized before an encryption or decryption operation.110#81ap./CONPOIINI, context area is already initializedDECRYPT Command7An initialize call contained a nonzero context pointer.9Verify that the proper sequence of initialize, encrypt or=decrypt, and finalize calls has referenced the pointer to the context area.22e#s1mECRCFAIL, CRC comparison indicates file 'file-spec' has been tampered with or is corruptedDECRYPT Command8The cyclic redundancy check (CRC) value for the original>plaintext file does not match the value of the decrypted file.>Although the file has been saved, changes have occurred in theciphertext file.contiguously, this message results and a noncontiguous file iscreated.9If file contiguity is important, free up sufficient spacecontiguous disk blocks. Purge files, delete unnecessary files,$or select a different output device.44/#=81`o.DBOPEN, cannot open database file 'file-spec'DECRYPT CommandYou specified an incorrect encryption key. Only one key can beused for each database.;Use the correct key. Specify the same key you used when youoriginally updated the MAC.66Y#31BFILBADBLK, file 'file-spec' contains bad block(s); processing not attemptedDECRYPT Command2You tried to encrypt a file containing bad blocks.You attempted a file encryption operation on a directory file.8The file encryption services are intended for user files9only. The encryption and decryption of directories is not supported.4Ensure that any wildcard file specification does not9include directory files. If you are at the DCL level, use6the /EXCLUDE=*.DIR qualifier in the ENCRYPT or DECRYPT9commands. If you are operating at the application program>interface level, filter each file specification before callingENCRYPT$ENCRYPT_FILE.=To encrypt whole directory structures, use the BACKUP utilitywith the /ENCRYPT qualifier.99E]#1WCFILNOPPF, file encryption of process-permanent file 'file-spec' is not supportedDECRYPT Command7You attempted a file encryption operation on a process-7permanent file. Even though process-permanent files can:reside on a disk as batch or log files, they are presented=to a process as though they are record devices, and cannot betreated as disk files.=Reconstruct the batch or command file to copy input data to ato a disk file; then copy it to the output log as appropriate.::<#_1m|;FILESTRUCT, input file structure error in file 'file-spec'DECRYPT Command=An internal logic error occurred when data from a compressed, encrypted file was decompressed.Contact HP Customer Support.;;7#F1hwy6FILSTRUNS, structure of encrypted file is unsupportedDECRYPT Command5A file created by a later version of the software was/presented to an earlier version for decryption.:A file encrypted with the file encryption routine contains9a routine version number to track any future enhancementsforced the creation of a file with a version number lower thananother file in the directory.2If this is not the intended action, provide a file=specification that does not force a version number value withthe /OUTPUT=filename qualifier.==j?#F1p6|>ILLALGMOD, algorithm submode selection unknown or unsupportedDECRYPT Command>You specified a submode code that the indicated algorithm does>!E#t:1v3DILLALGSEL, algorithm selection unknown, unavailable, or unsupportedDECRYPT Command8You supplied an algorithm code to a function that is not:supported or is not installed or available on this system.9None. That algorithm cannot be used in this installation.??=#1n}8returning this error. The descriptor type field indicates that=this descriptor type is not supported for passing parameters.;Verify that the descriptors passed conform to the specified4type requirements. It may be necessary to explicitly8initialize the descriptor type field to avoid default oruninitialized values.@@.X#y/1@BIMGVERNEQ, algorithm image version is no longer supported; relink requiredDECRYPT Command#S1o~i=INPLENERR, input length does not meet algorithm requirementsDECRYPT Command#The input data length is not valid.8The DESECB and DESCBC modes require input data that is a8multiple of 8 bytes in length. The AESECB128, AESECB192,9AESECB256, AESCBC128, AESCBC192, and AESCBC256 block mode-algorithms all require multiples of 16 bytes.Revise the input data length to be a multiple of 8 bytes or 16bytes, as required.CCU#1CBINSCONSPA, insufficient context space to support this algorithm's needsDECRYPT Command:The ENCRYPT$INIT function attempted to allocate space fromIncrease the process parameters to permit more virtual memory,The Encryption startup procedure SYS$STARTUP:ENCRYPT$START.COMhas not executed.7Execute the startup procedure from the system manager'saccount.EE(8#~D1ix:7INVARGCOU, invalid argument count for ENCRYPT$ routineDECRYPT Commandfile is either new, renamed, or has not been associated with aMAC.:Sometimes this message is an indication of file tampering.4Determine whether the file belongs in this database.SSE#I1vDNOKGENROU, no key generation routine is provided for this algorithmDECRYPT Command4The specified algorithm did not contain a random keygeneration routine.Contact HP Customer Support.TTA#>1r@NOKTSTROU, no key filter routine is provided for this algorithmDECRYPT Command=The specified algorithm did not contain a key filter routine.Contact HP Customer Support.UU3#$1ds 2NOTAUTHDB, file is not an authentication databaseDECRYPT Command7The file you specified is not a database created by the7Encryption for OpenVMS software. It is not usable as anauthentication database.#Use a different file specification.VV#5#sM1fu54NOTDEL, error prevents deletion of file 'file-spec'DECRYPT Command6You specified the /DELETE qualifier when encrypting or;decrypting a file, but you lack delete access to this file.key value string is composed of digits in the range 0 to 9 andA to F.YY/#1`o .NOTSECDB, setting is not in security databaseDECRYPT CommandOUTLENERR, output length does not meet algorithm requirementsDECRYPT Command;You did not supply an output buffer long enough to hold the;output from the encryption or decryption operation. Because;some algorithms increase or decrease data-byte count, check-the requirements of the different algorithms.9The DES block mode algorithms (DESECB and DESCBC) require:multiples of 8 bytes. The AES block modes (AESECB, AESCBC,>128, 192, or 256) all require output buffers for padded blocksin multiples of 16 bytes.+Supply a sufficiently larger output buffer.\\!U#v(1 3defined in the CLI table (called DCLTABLES) specified for thisaccount.ist.++j+ENCRYPT, ENCRYPT or V#s1\code (MAC) stored in the security database. The file is either>new, renamed, or has not been associated with a MAC. Sometimes0this message is an indication of file tampering.4Determine whether the file belongs in this database.+9#b1jy8SECSUMM1, Summary: Security settings authenticated: 'n'DECRYPT CommandThe message authentication code (MAC), based upon the securityThe message authentication code (MAC) in the database file hasbeen updated to a new MAC.'None. This is an informational message.+;Z#(1%MEUPDSECENT, security authentication code for file 'filename' has been updatedDECRYPT CommandD1gh5MEMALLERR, error allocating 'number' bytes of memoryr=An error was encountered while attempting to allocate memory.:Increase the memory available to the process and retry thecommand. \1QRNODFND, bit-to-text node foundr7Matching bit-to-text translation data was found for the#current error log bit-to-text node.None.:'q1XYL&NODNOTFND, bit-to-text node not foundr:No matching bit-to-text translation data was found for the>current error log bit-to-text node. This could result from anyof the following conditions:;o Bit-to-text translation of the current error log event is not supported.-o An invalid error log event was encountered.;o There is an error in the bit-to-text translation data for the current error log event.,1op=UNSFILFMT, unsupported file format encountered in 'filespec'r+An unsupported file format was encountered.>If the file is a converted error log file or an error log file:created on a version prior to OpenVMS Version 7.2, use the>DCL command ANALYZE/ERROR_LOG to translate the error log file.EVTTOOLRG, 'number'-byte error log event too large to convertr;The event cannot be converted because the size of the error.log event exceeds the maximum RMS record size.None.!!2NCRYPT, ENCRYPT or ?#11p1>AESDECERR, error during AES decryption, SSL status = 'status'DECRYPT Command0An error occured in the SSL AES decrypt routine.:If the SSL shareable images are installed, the error mightAESENCERR, error during AES encryption, SSL status = 'status'DECRYPT Command0An error occured in the SSL AES encrypt routine.:If the SSL shareable images are installed, the error mightis DES. When using AES, specify a key created with and for AES;encryption, and use AES encryption for both the key and thedata algorithm. For example:3 $ ENCRYPT /CREATE_KEY /AES MyAESKey "My AES key -9 _$ that must be at least 16, 24, or 32 bytes in length"0 $ ENCRYPT MYFILE.TXT MYAESKEY /KEY=AESCBC192 -' _$ /DATA=AESCBC192 /OUTPUT=MYFILE.ENC&&#F&1P_AESNODATA, no data to encryptDECRYPT CommandAESNOFUNC, that function is not currently implemented for AESDECRYPT Command7The attempted function is currently not implemented for6Advanced Encryption Standard (AES); it applies to Data,Encryption Standard (DES) only at this time.A message authentication code (MAC) has been calculated for anexisting file.'None. This is an informational message.,,8#_(1ix7AUTHMATCH, file 'file-spec' successfully authenticatedDECRYPT Command;The computed message authentication code (MAC) for the file"matches the previously stored MAC.'None. This is an informational message.--MB#T1s _AAUTHMISM, file authentication code mismatch for file 'file-spec'DECRYPT Command>The contents of the file have changed because the MAC does not>match the one stored in the database. This could indicate file tampering.8First, check the contents of the file; then make sure itbelongs in your directory...V#v1 @CONINIERR, unable to initialize the work area for the algorithm selectedDECRYPT Command=The context and work area contain inconsistent check data and7are assumed to be corrupted or incorrectly initialized.%Verify that the following took place:The context and work area supplied to the encryption primitive8routine was not long enough for the encryption primitive;routine to operate. This error is expected only if you makeVerify that the symbol used as the size of the context area is>correct for the selected algorithm and that the resulting size>reflects the minimum requirements for the encryption primitiveroutine.00&-#Yr1^m8,CONNOTINI, context area not yet initializedDECRYPT Command4The Context Block has not been initialized by either#ENCRYPT$INIT or ENCRYPT$K_FNC$INIT.7Check your program to be sure that the Context Block is9initialized before an encryption or decryption operation.110#81ap./CONPOIINI, context area is already initializedDECRYPT Command7An initialize call contained a nonzero context pointer.9Verify that the proper sequence of initialize, encrypt or=decrypt, and finalize calls has referenced the pointer to the context area.22e#s1mECRCFAIL, CRC comparison indicates file 'file-spec' has been tampered with or is corruptedDECRYPT Command8The cyclic redundancy check (CRC) value for the original>plaintext file does not match the value of the decrypted file.>Although the file has been saved, changes have occurred in theciphertext file.contiguously, this message results and a noncontiguous file iscreated.9If file contiguity is important, free up sufficient spacecontiguous disk blocks. Purge files, delete unnecessary files,$or select a different output device.44/#=81`o.DBOPEN, cannot open database file 'file-spec'DECRYPT CommandYou specified an incorrect encryption key. Only one key can beused for each database.;Use the correct key. Specify the same key you used when youoriginally updated the MAC.66Y#31BFILBADBLK, file 'file-spec' contains bad block(s); processing not attemptedDECRYPT Command2You tried to encrypt a file containing bad blocks.You attempted a file encryption operation on a directory file.8The file encryption services are intended for user files9only. The encryption and decryption of directories is not supported.4Ensure that any wildcard file specification does not9include directory files. If you are at the DCL level, use6the /EXCLUDE=*.DIR qualifier in the ENCRYPT or DECRYPT9commands. If you are operating at the application program>interface level, filter each file specification before callingENCRYPT$ENCRYPT_FILE.=To encrypt whole directory structures, use the BACKUP utilitywith the /ENCRYPT qualifier.99E]#1WCFILNOPPF, file encryption of process-permanent file 'file-spec' is not supportedDECRYPT Command7You attempted a file encryption operation on a process-7permanent file. Even though process-permanent files can:reside on a disk as batch or log files, they are presented=to a process as though they are record devices, and cannot betreated as disk files.=Reconstruct the batch or command file to copy input data to ato a disk file; then copy it to the output log as appropriate.::<#_1m|;FILESTRUCT, input file structure error in file 'file-spec'DECRYPT Command=An internal logic error occurred when data from a compressed, encrypted file was decompressed.Contact HP Customer Support.;;7#F1hwy6FILSTRUNS, structure of encrypted file is unsupportedDECRYPT Command5A file created by a later version of the software was/presented to an earlier version for decryption.:A file encrypted with the file encryption routine contains9a routine version number to track any future enhancementsforced the creation of a file with a version number lower thananother file in the directory.2If this is not the intended action, provide a file=specification that does not force a version number value withthe /OUTPUT=filename qualifier.==j?#F1p6|>ILLALGMOD, algorithm submode selection unknown or unsupportedDECRYPT Command>You specified a submode code that the indicated algorithm does>!E#t:1v3DILLALGSEL, algorithm selection unknown, unavailable, or unsupportedDECRYPT Command8You supplied an algorithm code to a function that is not:supported or is not installed or available on this system.9None. That algorithm cannot be used in this installation.??=#1n}8returning this error. The descriptor type field indicates that=this descriptor type is not supported for passing parameters.;Verify that the descriptors passed conform to the specified4type requirements. It may be necessary to explicitly8initialize the descriptor type field to avoid default oruninitialized values.@@.X#y/1@BIMGVERNEQ, algorithm image version is no longer supported; relink requiredDECRYPT Command#S1o~i=INPLENERR, input length does not meet algorithm requirementsDECRYPT Command#The input data length is not valid.8The DESECB and DESCBC modes require input data that is a8multiple of 8 bytes in length. The AESECB128, AESECB192,9AESECB256, AESCBC128, AESCBC192, and AESCBC256 block mode-algorithms all require multiples of 16 bytes.Revise the input data length to be a multiple of 8 bytes or 16bytes, as required.CCU#1CBINSCONSPA, insufficient context space to support this algorithm's needsDECRYPT Command:The ENCRYPT$INIT function attempted to allocate space fromIncrease the process parameters to permit more virtual memory,The Encryption startup procedure SYS$STARTUP:ENCRYPT$START.COMhas not executed.7Execute the startup procedure from the system manager'saccount.EE(8#~D1ix:7INVARGCOU, invalid argument count for ENCRYPT$ routineDECRYPT Commandfile is either new, renamed, or has not been associated with aMAC.:Sometimes this message is an indication of file tampering.4Determine whether the file belongs in this database.SSE#I1vDNOKGENROU, no key generation routine is provided for this algorithmDECRYPT Command4The specified algorithm did not contain a random keygeneration routine.Contact HP Customer Support.TTA#>1r@NOKTSTROU, no key filter routine is provided for this algorithmDECRYPT Command=The specified algorithm did not contain a key filter routine.Contact HP Customer Support.UU3#$1ds 2NOTAUTHDB, file is not an authentication databaseDECRYPT Command7The file you specified is not a database created by the7Encryption for OpenVMS software. It is not usable as anauthentication database.#Use a different file specification.VV#5#sM1fu54NOTDEL, error prevents deletion of file 'file-spec'DECRYPT Command6You specified the /DELETE qualifier when encrypting or;decrypting a file, but you lack delete access to this file.key value string is composed of digits in the range 0 to 9 andA to F.YY/#1`o .NOTSECDB, setting is not in security databaseDECRYPT CommandOUTLENERR, output length does not meet algorithm requirementsDECRYPT Command;You did not supply an output buffer long enough to hold the;output from the encryption or decryption operation. Because;some algorithms increase or decrease data-byte count, check-the requirements of the different algorithms.9The DES block mode algorithms (DESECB and DESCBC) require:multiples of 8 bytes. The AES block modes (AESECB, AESCBC,>128, 192, or 256) all require output buffers for padded blocksin multiples of 16 bytes.+Supply a sufficiently larger output buffer.\\!U#v(1 3defined in the CLI table (called DCLTABLES) specified for thisaccount.ist.j }hj7ERF, Error Log Repor &)1Wb5%DEVSELREQ, device selection requiredt Formatter(A device type or class must be selected.7Use the DCL command HELP or refer to the HP OpenVMS DCL5Dictionary to determine the appropriate qualifier for;selecting a device type or class. Then reenter the command.j,%#31Va$WRITEERR, error writing 'file-spec't Formatter"The output file cannot be written.2Take action based on the accompanying RMS message.j6;<E1mxH;UNKCLASS, unknown device class found, 'device-class-value't Formatter7An entry with an unknown or unsupported device class is encountered.;Use the UNKNOWN_ENTRIES keyword with the /INCLUDE qualifierlogged on to an OpenVMS Alpha system; if it is not, contact HPCustomer Support. jR-%/1^i,OPENIN, error opening 'input-file' as inputt Formatter$The file cannot be opened for input..Take action based on the accompanying message. jT 11bm0INCENTRY, incomplete entry type, 'entry-number't Formatter=The specified entry was only partially written into the error9log. Analyze/Error cannot decode this entry because it is incomplete.None. j-V3E1do?2UNKTYPE, unknown device type, 'device-type-value't Formatter7An entry with an unknown or unsupported device type was encountered.;Use the UNKNOWN_ENTRIES keyword with the /INCLUDE qualifier1mx;;INVQUAVAL, value 'value' invalid for qualifier 'qualifier't Formatter=The specified value is not valid for the specified qualifier.7Use the DCL HELP command or refer to the HP OpenVMS DCL9Dictionary for the valid qualifier values. Then enter thecorrected command.j41ep3TOTAL, 'n' selected, 'n' rejected, 'n' input filest Formatter>This message reports the total number of input files processedThis message reports the total number of input files processed7and the total number of entries selected, rejected, andskipped across all the files.None.j /1Q\INVREPTYP, invalid report typet Formatter.An internal consistency error was encountered.Contact HP Customer Support.jVF1DBADEVTYP, bad device type, 'value' in text library module, 'module- name't Formatter>A value in the specified library module is out of the requiredrange.Contact HP Customer Support.j\F1BBADEVVAL, bad device table value, 'value' in text library module, 'module-name't Formatter>A value in the specified library module is out of the requiredrange.Contact HP Customer Support. j(,A1]h:+LOADERR, error loading image, 'image-name't Formatter9An error occurred during an attempt to load the specifiedimage.=Obtain the specified image from your distribution kit. If the=specified image is not part of your distribution kit, contactHP Customer Support.!!j9XCHANGE, Exchange U @1qw28?DEVONLY, using device name only, ignoring parts of 'file-spec'tility6The Exchange utility has ignored all parts of the filevirtual volume and copying all files from the possibly corrupt;volume. Note that this copy must be made before exiting theExchange utility.''j#E1v|DINVVOLFMT, volume format specified is not consistent with file spectilitywill try again to copy the file to a good space on the volume.++j~(Dx1u{CWRITECHECKREC, write check error recovered on volume 'volume-name'tility:The Exchange utility encountered an error while checking avolume for further signs of deterioration. Discard or reformat"the volume if errors are frequent.,,j/*7/1[a)NOTDELETED, file 'file-name' not deletedtility6The Exchange utility cannot delete the specified file..Take action based on the accompanying message.--jH07g1hnZ6NOCOPBAD, cannot create .BAD file with wildcard namestilityvolume for further signs of deterioration. Discard or reformat"the volume if errors are frequent.//j71/|g1`fI.NOCOPBADDEL, cannot delete existing .BAD filetility:The Exchange utility cannot copy an RT-11 file with a file8type of .BAD because the same file already exists on thevolume.:Because RT-11 gives the file type of .BAD special meaning,+choose a different file type for your file.00jO2E~g1v|aDNOCOPDUP, already copied file with same output name in this commandtilityThe Exchange utility cannot execute a COPY command because theoutput volume is write-locked.=Remount the output volume with write access, then reenter thecommand.22j491jp:8NOCOPNODEL, file already exists and /NODELETE requestedtility:The Exchange utility cannot execute a COPY command because=the output file already exists and the /NODELETE qualifier isThe Exchange utility cannot execute a COPY command because the:output file already exists and is protected from deletion.9If you want to perform the copy, use the RENAME/NOPROTECT6command to remove the protection from the output file.44j63p71dj2NOCOPSAMDEV, illegal wildcard copy to same devicetility;The Exchange utility cannot perform a copy operation due to3illegal use of wildcards or the /REPLACE qualifier.8EXCHANGE will not perform a wildcard copy from a foreign7volume back to the same foreign volume, since it can be:difficult or impossible to prevent a loop with files being:copied more than once. It also will not perform a /REPLACE>copy of a file to itself, since that implies deleting the filebefore the copy.55jZ7?o1pvl>NOCOPSYSDEL, cannot delete existing .SYS file without /SYSTEMtility=The Exchange utility cannot copy a file with the file type of<.SYS because an existing file of the same name would have to be deleted.9If you want to delete the old file and copy the new file,4reenter the COPY command with the /SYSTEM qualifier.66j8-S/1^d,NOCOPYBOOT, unable to copy boot informationtility=The Exchange utility encountered a problem while attempting aCOPY/BOOT operation..Take action based on the accompanying message.77jD Fx1w}EDOS11_BADLABEL, volume on 'tape-drive' has label with invalid formattility>The Exchange utility received an error trying to read a DOS-118magtape label, or the label did not have a valid format.7In the case of an input error, take action based on the=accompanying message. In the case of invalid format, the tape;mounted on the drive is not a valid DOS-11 volume. Find and6mount the correct DOS-11 tape and retry the operation.88jE CaP1tz+BDOS11_BLOCKSIZE, volume on 'tape' has block larger than 512 bytestility;While reading a DOS-11 magtape, the Exchange utility read a$block that is longer than 512 bytes.=The file containing the long block cannot be processed by theExchange utility.99jF 4]/1ek3DOS11_IOERROR, error during I/O on volume 'volume'tility9The Exchange utility encountered an error during input or"output on a DOS-11 magtape volume..Take action based on the accompanying message.::j>G ?mm1pvP>DOS11_POSITION, rewinding tape to recover correct positioningtility;The Exchange utility lost its position on a DOS-11 magtape.0This is usually due to an input or output error.9The Exchange utility will rewind the tape and move to the2correct position. Allow time for this to complete.;;jH31dj2CANCELED, command was canceled by keyboard actiontility9The Exchange utility received a Ctrl/C key sequence while=processing a command; it canceled the command and returned to the prompt.None.<<jIWI1EBADLOGIC, internal logic error detected, please report error 'error- code'tilityOPENFOREIGN, unable to open 'device-name' as a foreign volumetility=The Exchange utility encountered an RMS error while trying to,open or connect to a foreign-mounted device.3Take action based on the accompanying RMS messages.>>jMCk1tz3BMANY_TO_ONE, input specifies multiple files, output a single filetility=The Exchange utility encountered a COPY command with an inputDU1ou=NODEVICE, missing or incorrect device name in 'command-line'tility=The Exchange utility cannot find the device name in a commandline.7Check the command for a misspelling or other error, andreenter the correct command.CCj\=41nt)Reenter the command, specifying a local device name, or log instream file, or the input file is not a valid stream file. Use-the correct /RECORD_FORMAT type for the file.QQj8 :Z1kqJ9FIL11_NOREC, ignoring /RECORD_FORMAT for Files-11 outputtility8The Exchange utility does not support the /RECORD_FORMAT option on Files-11 output files.<1ou=STNOTAVAIL, requested starting block number is not availabletility;The Exchange utility cannot satisfy a /START_BLOCK request.>Either the requested block is already contained inside a file,=or it is larger than the largest block on the volume. Use theThe Exchange utility created a larger than necessary bad block*file because the volume directory is full.EXCHANGE and take the EXCHANGE-initialized volume to the other>system. With the EXCHANGE-initialized volume, you will be able=to transfer files between the two systems in both directions.XXj DF31u{CIGNORE_DIRE, directory name ignored, not used for this volume typetility:The Exchange utility ignored the directory name field of a file name.2Do not enter the directory name; it is not needed.YYjtAi1rx@RT11_ERRLOCK, volume will be write-locked to prevent corruptiontility8The Exchange utility write-locked a volume. EXCHANGE has9discovered a structure error, and is refusing to write to>the volume so that the error will not be made worse. It should=be possible to read some or all of the files on the disk. TheSYS$UPDATE:CONSCOPY.COM for an example of how to save a volume>as a virtual device, reinitialize the volume, and copy all the"files back to the original volume.^^jP>k1oub=RT11_STBLOCK, file start block - segment header inconsistenttility/ALLOCATION values cannot be larger than the device or 65,535,whichever is smaller.``j(C1tz4:BTOOMANYCOL, too many columns, reduced number to fit listing widthtility:The Exchange utility encountered a DIRECTORY/COLUMNS valueThe file is read successfully, but you should watch the volume;for further signs of deterioration. Discard or reformat thevolume if errors are frequent.eej5H1fl4RT11_UNKENT, entry with unknown format in directorytility4The Exchange utility found a directory entry with anunexpected format.=EXCHANGE will refuse to write to the volume, but will attempt9to read the volume and make what sense of the volume thatdefined in the CLI table (called DCLTABLES) specified for thisaccount.ist.I|EXCHANGE, Exchange UVC1zCRTOUTEOF, end-of-file on output 'file-spec', insufficient space on volumetilityI/1ou=PARTCOPIED, file 'file-name' partially copied to 'file-spec'tility>The Exchange utility copied part of a file before encountering an error..Take action based on the accompanying message.e:l1kqw9READERRREC, read error recovered on volume 'volume-name'tility;The Exchange utility encountered an error while reading the/volume, but the operation succeeded on a retry.>The file is read successfully, but you should watch the volume;for further signs of deterioration. Discard or reformat thevolume if errors are frequent.LDX1u{^CINVRECFMT, record format specified inconsistent with volume formattility8The Exchange utility found that the format option on theit is on the correct file specification. It is possible to put;/RECORD_FORMAT on either input or output specifications (or(even on both), depending on the command.-K1^d,NOVOLUMES, no volumes are currently mountedtility=The Exchange utility cannot show mounted volumes because none are mounted.None.!,O1]c3+BADDEV, device is unsupported for transfertility9BINRECFMT, an illegal binary record found in 'file-name'tility7The Exchange utility found a record that is not a validformatted binary record.;Retry the command after checking whether the file is really;a PDP-11 formatted binary file. If it is not a binary file,:use the correct /RECORD_FORMAT qualifier. For example, the:console file CI780.BIN is assumed to be a formatted binary;file, since it has the file type BIN. CI780.BIN is really a9fixed-length file, so it should be copied with a /RECORD_FORMAT=FIXED qualifier. iBY1sy{AVOLUME_FULL, volume is full (insufficient space for the request)tility9The Exchange utility is unable to copy a file because thevolume has insufficient space.;RT-11 supports only contiguous files; therefore the volumes=must have a free space as large as the file being copied. Use:the DIRECTORY/ALL command to see where the unused areas on=the volume are. By deleting unneeded files adjacent to unused;areas, it might be possible to create a large enough space.character were substituted for each invalid byte, and the file was copied.The Exchange utility encountered an error while waiting for anRMS operation to complete.=This is possible only if EXCHANGE is interrupted by a Ctrl/Y.=Reenter the command and let it complete without interruption.?%[1V\Q$NOSYSACT, no action on .SYS file(s)tility;The Exchange utility cannot perform the requested action onfiles with the file type .SYS.A value in the specified library module is out of the requiredrange.Contact HP Customer Support.j\F1BBADEVVAL, bad device table value, 'value' in text library module, 'module-name't Formatter>A value in the specified library module is out of the requiredrange.Contact HP Customer Support. j(,A1]h:+LOADERR, error loading image, 'image-name't Formatter9An error occurred during an attempt to load the specifiedimage.=Obtain the specified image from your distribution kit. If the=specified image is not part of your distribution kit, contactHP Customer Support.!!j9XCHANGE, Exchange U @1qw28?DEVONLY, using device name only, ignoring parts of 'file-spec'tility6The Exchange utility has ignored all parts of the filevirtual volume and copying all files from the possibly corrupt;volume. Note that this copy must be made before exiting theExchange utility.''j#E1v|DINVVOLFMT, volume format specified is not consistent with file spectilitywill try again to copy the file to a good space on the volume.++j~(Dx1u{CWRITECHECKREC, write check error recovered on volume 'volume-name'tility:The Exchange utility encountered an error while checking avolume for further signs of deterioration. Discard or reformat"the volume if errors are frequent.,,j/*7/1[a)NOTDELETED, file 'file-name' not deletedtility6The Exchange utility cannot delete the specified file..Take action based on the accompanying message.--jH07g1hnZ6NOCOPBAD, cannot create .BAD file with wildcard namestilityvolume for further signs of deterioration. Discard or reformat"the volume if errors are frequent.//j71/|g1`fI.NOCOPBADDEL, cannot delete existing .BAD filetility:The Exchange utility cannot copy an RT-11 file with a file8type of .BAD because the same file already exists on thevolume.:Because RT-11 gives the file type of .BAD special meaning,+choose a different file type for your file.00jO2E~g1v|aDNOCOPDUP, already copied file with same output name in this commandtilityThe Exchange utility cannot execute a COPY command because theoutput volume is write-locked.=Remount the output volume with write access, then reenter thecommand.22j491jp:8NOCOPNODEL, file already exists and /NODELETE requestedtility:The Exchange utility cannot execute a COPY command because=the output file already exists and the /NODELETE qualifier isThe Exchange utility cannot execute a COPY command because the:output file already exists and is protected from deletion.9If you want to perform the copy, use the RENAME/NOPROTECT6command to remove the protection from the output file.44j63p71dj2NOCOPSAMDEV, illegal wildcard copy to same devicetility;The Exchange utility cannot perform a copy operation due to3illegal use of wildcards or the /REPLACE qualifier.8EXCHANGE will not perform a wildcard copy from a foreign7volume back to the same foreign volume, since it can be:difficult or impossible to prevent a loop with files being:copied more than once. It also will not perform a /REPLACE>copy of a file to itself, since that implies deleting the filebefore the copy.55jZ7?o1pvl>NOCOPSYSDEL, cannot delete existing .SYS file without /SYSTEMtility=The Exchange utility cannot copy a file with the file type of<.SYS because an existing file of the same name would have to be deleted.9If you want to delete the old file and copy the new file,4reenter the COPY command with the /SYSTEM qualifier.66j8-S/1^d,NOCOPYBOOT, unable to copy boot informationtility=The Exchange utility encountered a problem while attempting aCOPY/BOOT operation..Take action based on the accompanying message.77jD Fx1w}EDOS11_BADLABEL, volume on 'tape-drive' has label with invalid formattility>The Exchange utility received an error trying to read a DOS-118magtape label, or the label did not have a valid format.7In the case of an input error, take action based on the=accompanying message. In the case of invalid format, the tape;mounted on the drive is not a valid DOS-11 volume. Find and6mount the correct DOS-11 tape and retry the operation.88jE CaP1tz+BDOS11_BLOCKSIZE, volume on 'tape' has block larger than 512 bytestility;While reading a DOS-11 magtape, the Exchange utility read a$block that is longer than 512 bytes.=The file containing the long block cannot be processed by theExchange utility.99jF 4]/1ek3DOS11_IOERROR, error during I/O on volume 'volume'tility9The Exchange utility encountered an error during input or"output on a DOS-11 magtape volume..Take action based on the accompanying message.::j>G ?mm1pvP>DOS11_POSITION, rewinding tape to recover correct positioningtility;The Exchange utility lost its position on a DOS-11 magtape.0This is usually due to an input or output error.9The Exchange utility will rewind the tape and move to the2correct position. Allow time for this to complete.;;jH31dj2CANCELED, command was canceled by keyboard actiontility9The Exchange utility received a Ctrl/C key sequence while=processing a command; it canceled the command and returned to the prompt.None.<<jIWI1EBADLOGIC, internal logic error detected, please report error 'error- code'tilityOPENFOREIGN, unable to open 'device-name' as a foreign volumetility=The Exchange utility encountered an RMS error while trying to,open or connect to a foreign-mounted device.3Take action based on the accompanying RMS messages.>>jMCk1tz3BMANY_TO_ONE, input specifies multiple files, output a single filetility=The Exchange utility encountered a COPY command with an inputDU1ou=NODEVICE, missing or incorrect device name in 'command-line'tility=The Exchange utility cannot find the device name in a commandline.7Check the command for a misspelling or other error, andreenter the correct command.CCj\=41nt)Reenter the command, specifying a local device name, or log instream file, or the input file is not a valid stream file. Use-the correct /RECORD_FORMAT type for the file.QQj8 :Z1kqJ9FIL11_NOREC, ignoring /RECORD_FORMAT for Files-11 outputtility8The Exchange utility does not support the /RECORD_FORMAT option on Files-11 output files.<1ou=STNOTAVAIL, requested starting block number is not availabletility;The Exchange utility cannot satisfy a /START_BLOCK request.>Either the requested block is already contained inside a file,=or it is larger than the largest block on the volume. Use theThe Exchange utility created a larger than necessary bad block*file because the volume directory is full.EXCHANGE and take the EXCHANGE-initialized volume to the other>system. With the EXCHANGE-initialized volume, you will be able=to transfer files between the two systems in both directions.XXj DF31u{CIGNORE_DIRE, directory name ignored, not used for this volume typetility:The Exchange utility ignored the directory name field of a file name.2Do not enter the directory name; it is not needed.YYjtAi1rx@RT11_ERRLOCK, volume will be write-locked to prevent corruptiontility8The Exchange utility write-locked a volume. EXCHANGE has9discovered a structure error, and is refusing to write to>the volume so that the error will not be made worse. It should=be possible to read some or all of the files on the disk. TheSYS$UPDATE:CONSCOPY.COM for an example of how to save a volume>as a virtual device, reinitialize the volume, and copy all the"files back to the original volume.^^jP>k1oub=RT11_STBLOCK, file start block - segment header inconsistenttility/ALLOCATION values cannot be larger than the device or 65,535,whichever is smaller.``j(C1tz4:BTOOMANYCOL, too many columns, reduced number to fit listing widthtility:The Exchange utility encountered a DIRECTORY/COLUMNS valueThe file is read successfully, but you should watch the volume;for further signs of deterioration. Discard or reformat thevolume if errors are frequent.eej5H1fl4RT11_UNKENT, entry with unknown format in directorytility4The Exchange utility found a directory entry with anunexpected format.=EXCHANGE will refuse to write to the volume, but will attempt9to read the volume and make what sense of the volume thatdefined in the CLI table (called DCLTABLES) specified for thisaccount.ist.}t'FDL, FDL Utilities*$m1[[)SYNTAX, syntax error in statement 'text'#An FDL syntax error is encountered.;Examine the specified line in the FDL file, determine which0validity rule is violated, and correct the line.C]1ttBINVBLK, invalid RMS control block at virtual address 'hex-offset';FDL$GENERATE or FDL$RELEASE passed an address that is not a valid OpenVMS RMS control block.Correct the invalid address.G3:21dd2INVDATIM, invalid date/time in statement 'number'9The specified statement contains an invalid date or time.1Correct the invalid date or time in the FDL file.H$`A1UU#OPENFDL, error opening 'file-name'>This message will be accompanied by an OpenVMS RMS file system message that explains the error.7Take action based on the accompanying OpenVMS RMS errormessage.LWW1?UNKNOWN_TAG, 'reference-string' is an unknown tag in statement 'number'7No value or an incorrect value was used for the STORED_SEMANTICS secondary attribute.Use the correct value.M $^M1UU#CREATE, error creating 'file-name'UNQUAKW, unrecognized qualifier keyword in statement 'number' 'reference-text'A keyword was misspelled.%Correct the spelling in the FDL file. s,4)1]]+NOQUAL, no qualifier in statement 'number'3A qualifier was omitted from the attribute keyword.(Edit the FDL file and add the qualifier. x&cX1WW%RFLOC, unable to locate related fileUNSECKW, unrecognized secondary keyword in statement 'number' 'reference-text'A keyword was misspelled.%Correct the spelling in the FDL file. ;1ll':MULPRI, multiple primary definition in statement 'number'9The same primary attribute was specified in more than oneA network socket could not be accepted. This can occur if your5network parameters prohibit adequate socket creation.#Contact your network administrator../1KeACCEPTED, Access grantednfiguration Manager Server.This is a normal access informational message.None.9.<1j8JOINED, Joined subserver association with 'server-name'nfiguration Manager Server;(Informational) A subserver joined an existing association.None.(.D1Ys'HEARTBEAT, Requesting CLIENT heartbeatnfiguration Manager Server:(Diagnostic) The GCM server is requesting to hear from itsclients.None.(.G1Ys'HEARTBEAT, Requesting SERVER heartbeatnfiguration Manager Server:(Diagnostic) The GCM server is requesting to hear from its subservers.None.:.=1k9HEARTBEAT, Received CLIENT heartbeat from 'session-name'nfiguration Manager Server<(Diagnostic) The GCM server heard from the specified client.None.:.@1k9HEARTBEAT, Received SERVER heartbeat from 'session-name'nfiguration Manager Server4(Diagnostic) The GCM server heard from the specified subserver.None.+.:1\v*CLIENTNOTIFY, Issued Client Change Notifynfiguration Manager Server9(Diagnostic) A change event was issued to active clients.None...=1_y-SERVERNOTIFY, Issued Subserver Change Notifynfiguration Manager Server<(Diagnostic) A change event was issued to active subservers.None. :.I1k9CLIENTCLOSE, Client disconnected session: 'session-name'nfiguration Manager Server5(Informational) The client requested to terminate thespecified session.None.   .;1QkTERMREQ, Termination requestednfiguration Manager Server:The session was terminated by client or subserver request.None.!!S (.1Ys_e'NONGALAXY, This is not a Galaxy systemnfiguration Manager Server9(Informational) The GCM server is running on a non-Galaxy>system. All systems running OpenVMS Version 7.2-1H1 or greater=can use the GCM server for limited operations, but the server4is really intended to run on Galaxy-enabled systems.None."" .M1PjCFGEVENT, Configuration eventnfiguration Manager Server>This timestamp message marks the occurrence of a configuration change event.None.##! -.1^x-3,OVERLAP, Overlapping events, re-encoding...nfiguration Manager Server:A configuration change event occurred while the server wasnormal for some commands. The message is returned simply as an!indication of command completion.None.'':.J1k9CLOSECLIENT, Server disconnected session: 'session-name'nfiguration Manager Server9(Informational) The GCM server disconnected the specifiedclient session.None.((4.11e3CLOSESERVER, Server disconnected SUBSERVER sessionnfiguration Manager Server0The GCM server disconnected a subserver session.None.))J8.$1i8\7NOLOGICAL, GCMSRV$DIR system logical name is undefinednfiguration Manager Server9The logical name GCMSRV$DIR is established by the startupY1e3BADASSOC, Bad ASSOCIATION record in Admin Databasenfiguration Manager Server=The association record in the GCM server database is corrupt.=Run the setup utility SYS$COMMON:[SYS$CONFIG]GCM$SETUP.EXE toreinitialize the database.33S8.`1ie7NOLOCALSYS, Local SYSTEM not defined in Admin Databasenfiguration Manager Server>The system records in the GCM server database do not contain a definition for the local system.=Run the setup utility SYS$COMMON:[SYS$CONFIG]GCM$SETUP.EXE to;reinitialize the database, and be sure to define your localsystem.44..:`1_y-NOLISTENER, Failed to create Listener socketnfiguration Manager Server9The GCM server could not create a socket listener thread.:Verify that the TCP/IP network is properly initialized. If$necessary, reinstall the GCM server.55).3`1Zt(NOENCODER, Failed to create XML Encodernfiguration Manager Server2The GCM server could not create an encoder thread.:Verify that the TCP/IP network is properly initialized. If$necessary, reinstall the GCM server.66+.:`1\v*NOHEART, Failed to create Heartbeat Timernfiguration Manager Server9The GCM server could not create a heartbeat timer thread.:Verify that the TCP/IP network is properly initialized. If$necessary, reinstall the GCM server.77.r1JdEXIT, GCM Server Exitednfiguration Manager ServerThe GCM server process failed.;Restart or reinstall the GCM server and investigate why the5process would fail. Check server log files for clues.88.i1NhRESTART, Restarting processnfiguration Manager Server=The GCM server detected an internal application inconsistency6and initiated a restart after disconnecting all active8clients. The inconsistency can result from exhaustion of;resources or quotas, interaction with another system event,8or malicious user actions. If the GCM server restarts 99:times, it will abort further attempts until it is manually restarted.None.996.P1g5GCMABORT, GCM_SERVER aborted by logical name requestnfiguration Manager Server=The user has invoked the GCMSRV$ABORT logical to halt furtherrestart attempts.None.::&.1Wq-%NOLOCALNAME, Unknown local host namenfiguration Manager Server=The GCM server could not obtain the TCP/IP local host name by;calling the TCP/IP service "getlocalhostname". This failure9indicates a problem with your TCP/IP installation or nameserver.=Contact your network administrator to determine why host name=lookup may have failed. On private networks that do not use aContact your GCM server administrator to request the necessary privileges.<<?.x,1p.>FATALOP, Fatal operation requested by session: 'session-name'nfiguration Manager Server>A session attempted to execute an unknown operation code. This8attempt was probably prompted by a client or server bug.+Report this problem to HP Customer Support.==2.:1c}1UNRAVELED, Client thread terminated on exceptionnfiguration Manager Server9A fatal thread exception caused termination of a session.Restart the client or server.>>/.l1`z.DUPCON, Client requested duplicate connectionnfiguration Manager ServerContact your GCM server administrator to request the necessary privileges.@@+.U!1\v*INVCMDREQ, Invalid command request packetnfiguration Manager Serverexecution. A large number of pending commands can also cause anew command request to fail.1Wq%NOMEMORY, Insufficient server memorynfiguration Manager Server6The GCM server could not execute a function because of8insufficient memory available to the GCM server process.=Check process quotas and restart the GCM server if necessary.CC+.n1\v*NOCMDRETURN, Error opening command outputnfiguration Manager Serverexceeded the number of concurrent connections supported by the GCM server.>Contact your GCM server administrator. The number of supported7connections is defined in the GCM server administration=database and can be altered only by a user with administrator privileges.JJ.1PjDENIED, Exceeded server limitnfiguration Manager Server:A subserver connection request was denied because it wouldConsult your GCM server administrator. The number of supported7connections is defined in the GCM server administration=database and can be altered only by a user with administrator privileges.KKd=.r|1nvA subserver listed in the association cannot be accessed using2the provided network name and address information.>Verify that the proper information is in the database and thatA subserver session could not be created. This can result from(resource exhaustion or network problems.;Verify the GCM server records in the database. You may also(need to restart one or more GCM servers.MM7.:A1h6NOCONLOG, Error opening Connection Log; Continuing...nfiguration Manager Server9The GCM server cannot create the optional connection log.5Check whether there is write access to the SYS$CONFIG directory.NN2.<A1c}1NOEVTLOG, Error opening Event Log; Continuing...nfiguration Manager Server;The GCM server cannot create the optional server event log.5Check whether there is write access to the SYS$CONFIG directory.OO~0.i1a{'/NOSUBSEC, Unable to establish security contextnfiguration Manager Server:Secure Sockets Layer (SSL) security cannot be established.=This error typically preceeds a fatal error during an attempt2to create one of the critical application threads.>Verify that the SSL run-time libraries are properly installed.)You may need to reinstall the GCM server.PP1).,1ZtC(BADREAD, Unable to read from connectionnfiguration Manager ServerIf necessary, restart one or more of the GCM servers until theproblem is resolved.TTJ&.f1Wq\%NOREPORT, Error accessing FRU reportnfiguration Manager Server-An error occurred while accessing an optional+Field Replaceable Unit (FRU) report file at*SYS$COMMON:[SYS$CONFIG]GCM_FRUREPORT.HTML.7Check whether the type of system that the GCM server is-running on supports FRU reporting operations.UU,. 1]w+NOLOG, Log is empty or logging is disablednfiguration Manager Server9The GCM server cannot return a connect or event log file,;or the attempted logging operation has been disabled in the database.Verify that logging is enabled.VV..k*1_y-BADCMDREQ, Bad command request packet formatnfiguration Manager ServerEnsure that there is write access to the SYS$CONFIG directory.XXA'.T1XrS&NOBANNER, Error accessing Banner filenfiguration Manager Server&A client requested the GCM banner file;SYS$COMMON:[SYS$CONFIG]GCM_BANNER.JPG, but no such file was)provided by the GCM server administrator.9Refer to the GCM installation guide for information aboutsetting up a banner file.YYD(.U1YsV'NONOTICE, Error accessing Notices filenfiguration Manager Server&A client requested the GCM notice filedescribes a system that does not match the system it is trying to engage.-Select a different model or create a new one.]]9.1j58NOTENABLED, Administrator has not enabled subscriptionsnfiguration Manager Server=The installer or GCM server administrator has not established:a subscription template so that users can subscribe to the7association, as required by the installation procedure.=Establish a subscription template so that users can subscribe7to the association. (See the GCM installation guide for details.)^^(.In1Ys*'NODOCLIST, Document list not availablenfiguration Manager Server=An error occurred while trying to create a list of the posted documents.;Check whether the file specifications have been incorrectly1formatted in the library records of the database.__0.41a{/NODOCUMENTS, No documents are currently postednfiguration Manager Server3The user requested documents from an empty library.None.``L).M1Zt^(NOFULLCFG, Configuration assembly errornfiguration Manager Server=Only a partial configuration model could be obtained from theThe GCM server could not find and post a document described ina database library record.The subserver is currently shut down or otherwise unreachable.Restart the subserver.hhI*.C1[u[)SUBREJECT, Subserver connection rejectednfiguration Manager Server:A subserver connection attempt was rejected for an unknownreason.6Verify that the proper GCM server records exist in the;database. If this error occurs again, try restarting one or/more GCM servers until the problem is resolved.ii..k.1_y-UNSUPPORTED, Invalid command for system typenfiguration Manager Server;You attempted to execute a command that is not supported by.the system on which the GCM server is running.-Avoid using this command on this system type.jj/.I1`z.AMLISTENING, Waiting for client connection...nfiguration Manager ServerCRELNMFAIL, call to $CRELNM failed - trying to create process# logical 'logical name'inker Utility:The linker failed to create a logical name during the link operation.5Have your system manager contact HP Customer Support.nn /!O41`m.NOMODS, no input modules specified (or found)inker Utility4The linker did not find any input modules which is arequirement for the link.3Specify the module or list of modules to be linked.oo !1d BMULELFSEC, attributes for ELF section 'section name' incompatible( with previous no-alloc usage module: 'module-name' file: 'file-name'inker Utility:An Executable and Linking Format (ELF) module has declared;a program section to be of a different type than a previous declaration.;Either change the attributes for the program section withinILLSECNUM, section number 'number' not legal for local symbol) relocation type: 'relocation-type'! to section: 'section-name'# offset: 'hexadecimal-number'" local symbol: 'symbol-name' module: 'module-name' file: 'file-name'inker Utilitythe command definition file being incompatible or the use of aforeign command line.=Do not link using a foreign command line interface. Make sure=the correct command line definition file for the LINK verb is being used. '3E!>1vEDFATLQUAL, qualifier 'qualifier-name' illegal for OpenVMS ELF imagesinker Utilitylinker which links OpenVMS Executable and Linking Format (ELF)images.=Issue the link command again without the indicated qualifier.'D!G>1uCQUALIGNSHR, qualifier 'qualifier-name' ignored for shareable imageinker Utility>The qualifier indicated is not supported for linking shareableimages.=Issue the link command again without the indicated qualifier.'/!_1A>CONSEGATT, conflicting segment attributes for 'data-type' and 'segment-type'4 'virtual-address-space' assigned to 'segment-type'inker Utility7Segment qualifier options (specified with the qualifier9/SEGMENT) indicate that a segment is to be made SHORT and:placed into an address region which differs from the SHORTis not compatible with the architecture of the system on whichthe image is being generated.:If you want the image to run on systems having a page size>larger than that specified by the /BPAGE qualifier, relink theThe command interpreter detected a syntax error in the commandline.+Take action based on the following message.'#=!7"1n{&LINERR, command line segment in error 'command-line'inker Utility6The specified segment of the command line is in error.!Enter the command line correctly.'B$R!f^1T;FIRSTMOD, first input file being a library requires module extractioninker UtilityEnter the command specifying an input file or use the /INCLUDEqualifier on the library file.'O%s!z61+ainformation about short data. Have your system manager contactHP Customer Support.'+.!0/1_l-CRFERR, error encountered in Cross Referenceinker Utility/The Cross-Reference facility returned an error..Take action based on the accompanying message.',W!MM1/BNOTIMGLIB, file 'file-name' is not a shareable image symbol table libraryinker Utility=The system library IMAGELIB was found, but is not a shareableimage library.>Determine the cause of the failure and relink when the failure is corrected.'-S!J/1 shareable image being built had neither the relative attributehave both of these attributes. As a result of not having these9attributes, the program section will not be listed in theimage's Global Symbol Table.:Determine why the program section does not have both theseThe linker found that there are two shareable images exporting9a program section (psect) of the same name. The shareable;images will refer to their own copy of the program section,>but the linker is unable to determine the target of referencesfrom the image being linked.>Determine which of the two shareable images, if either, should>export the program section, re-link the shareable images, thenrelink the current image.(('73!S81dq2LNKGFL, failed to access linkage file 'file-name'inker Utility;The linkage file was not accessible for the reason given inthe secondary message.7Correct the problem indicated and issue the link again.))'8E!*1vDUNRESBOUND, 'number' bound procedures not present in symbol vector:inker UtilityThere is a reference to the symbol that could not be resolved.Once the strong references are fixed, the weak references will;not be shown. The linker assumes that the user wants to see=the weak references as long as there are any undefined strong references.object module was not included) and perform the link operationagain...'E=!1WCINVLDHDR, invalid ELF header; field 'field-name' has invalid value 'hexadecimal-value' module: 'module-name' file: 'file-name'inker Utility9The Executable and Linking Format (ELF) module header has>certain landmarks that the linker examines for a sanity check.:The linker found the listed field to contain an invalid or.unsupported value and is reporting that value.:Run ANALYZE on the module and determine if the module is a!1o@INVLDHDRF, header flag 'flag-name' has incorrect sense in flags, 'hexadecimal-value'field-name' ' module: 'module-name' file: 'file-name'inker Utility9The Executable and Linking Format (ELF) module header has:specific flags set for OpenVMS modules. The linker found aflag not set correctly.8Run ANALYZE on the module and determine if the module is9a valid OpenVMS I64 object module and inform the languageprocessor owner if not.00'?!1~ =INVLDNULL, NULL section field 'field-name' has invalid value 'hexadecimal-value' module: 'module-name' file: 'file-name'inker Utility;The first section in an Executable and Linking Format (ELF);module is null by definition. The linker discovered that it3did not contain a correct value for a null section.9Run ANALYZE on the module and determine if the first NULL8section has the correct settings and inform the languageprocessor owner if not.11' @!C1COMPWARN, compilation warnings followed by module: 'module-name' file: 'file-name' or. shareable image: 'shareable-image-name'inker Utility9The completion code of the module has a severity level ofWARNING.None.22'A!_]1YERRORS, compilation errors followed by module: 'module-name' file: 'file-name' or. shareable image: 'shareable-image-name' or" mask file: 'mask-file-name'inker Utility9The completion code of the module has a severity level of$ERROR. Image production is disabled.>Correct the source from which the module was produced and thenissue the link command again.33'B!o]1CEOMFTL, link abort specified followed by module: 'module-name' file: 'file-name' or. shareable image: 'shareable-image-name'inker Utility9The completion code of the module has a severity level of4ABORT. The linker aborts the current link operation.>Correct the source from which the module was produced and thenissue the link command again.44'C(!\a1Yf#'FATALERROR, fatal error message issuedinker Utility9The linker has encountered a situation in which it cannot!continue with the link operation.>Correct the problem or problems reported prior to this message!and issue the link command again.55'AD! 1SDRSRVDNAME, linker reserved name 'symbol-name' converted to 'symbol- name' module: 'module-name' file: 'file-name'inker Utilityinternally to help with the link operation. The linker changes8the name to lowercase characters to avoid a conflict andcontinues with the link.=If you find the action taken by the linker is not acceptable,8modify your sources so that you do not use this reservedprefix.66'E!`D18EACONPSCATT, attribute 'attribute-name' conflicts with 'attribute-- name' ; set to NO'attribute-name' section: 'section-name' followed by module: 'module-name' file: 'file-name' or. shareable image: 'shareable-image-name'inker Utility=The linker found conflicting attributes for a program section!contributed by different modules.9None. The linker modified the attributes to eliminate the conflict.77'F!q31ECONFALGN, PSECT option alignment 'decimal-number' less than compiler7 assigned 'decimal-number'; alignment ignored section: 'section-name' module: 'module-name' file: 'file-name'inker UtilityThe language processor has emitted more than one module headerfor the module.5Have your system manager contact HP Customer Support.<<'K!c10@BADUNWSTRCT, one or more unwind related sections are missing or corrupted module: 'module-name' file: 'file-name'inker Utility8The language processor has emitted incomplete or corrupt)unwind information for the object module.>If you are using the Intel Assembler, the you have to manually=specify the unwind sections; repair the code. Otherwise, have0your system manager contact HP Customer Support.=='L[!Y61($MULTLNM, multiple LNM records found module: 'module-name' file: 'file-name'inker Utility9The language processor has emitted more than one languageprocessor note for the module.5Have your system manager contact HP Customer Support.>>'M!61=ENTSIZDIF, size of table entry 'decimal-number' differs from* declared size 'decimal-number' section: 'section-name' module: 'module-name' file: 'file-name'inker UtilityThe symbol lists the program section name as the owner but thesymbol or a function symbol owned by a program section with no allocation.5Have your system manager contact HP Customer Support.EE'(Tv!P61:ALCLCOM, the symbol 'symbol-name' has local binding but is also a common symbol module: 'module-name'inker Utility9The language processor has emitted a local, common symbolwhich is not allowed.5Have your system manager contact HP Customer Support.FF'Ui!R61/2NOSTTCOM, ELF symbol type COMMON is not supported module: 'module-name' file: 'file-name'inker Utility:The language processor has emitted a symbol of type COMMONthat is not supported.5Have your system manager contact HP Customer Support.GG'_V!t61;qBSHTALIGN, section header table module offset 'hexadecimal-number', not 'decimal-number'-byte aligned file: 'file-name'inker Utility9The language processor emitted an object module where the9section header table did not meet alignment requirements.5Have your system manager contact HP Customer Support.HH'W!u61oCSCTNXCAPING, ELF section number indirection escaping not supported followed by module: 'module-name' file: 'file-name' or. shareable image: 'shareable-image-name'inker Utility6The current version of the linker does not support the=Executable and Linking Format (ELF) section escaping feature.5Have your system manager contact HP Customer Support.II'iX!N61E{ECONFPSCUSED, a section with conflicting attributes is used to assign* memory for the common symbol section: 'section-name'( symbol: 'type-name' 'symbol-name'inker Utility6Not all program sections defining a common symbol havecompatible attributes.5Have your system manager contact HP Customer Support.JJ'dY!@g1v;COLLSHT, SHORT psect cannot be collected via linker option section: 'section-name' module: 'module-name' file: 'file-name'inker Utility7SHORT program sections cannot be specified in a collectoption.The specified modules were not compiled with the same externalfiles (for example, a library). Recompile the specified modules.LL'{[!61WDILLPSCIDX, linked psect index 'decimal-number' from psect 'section- name' is not valid module: 'module-name' file: 'file-name'inker Utility6The language processor has emitted a section where the>section index number in a link field does not point to a validsection.5Have your system manager contact HP Customer Support.MM'n\p!61J9INVLNKG, invalid target linkage for symbol 'symbol-name' module: 'module-name' file: 'file-name'inker UtilityINVOVRINI, incompatible multiple initializations for overlaid section section: 'section-name' module: 'module-name' file: 'file-name' module: 'module-name' file: 'file-name'inker Utility>A program section is being initialized a subsequent time where:the non-zero portions of the initializations do not match.sure the register linkage is compatible between the caller and9the target routine and then issue the link command again.fa!61ELNKGFND, linkage section found in module declared to have no linkage information section: 'section-name' module: 'module-name' file: 'file-name'inker Utility>The language processor emitted a linkage signature section but>did not indicate that the module contains linkage information.)The linkage signature section is ignored.5Have your system manager contact HP Customer Support.fLb!_61(^BLNKGSENSE, declaration linkage for non-definition symbol 'symbol- name' module: 'module-name' file: 'file-name'inker Utility7The language processor has emitted a definition linkage&signature for a non-definition symbol.5Have your system manager contact HP Customer Support.f>cz!b61PCMULDEFLNKG, symbol 'symbol-name' has subsequent linkage definition module: 'module-name' file: 'file-name'inker Utility7The language processor has given a symbol more than one)linkage signature within the same module.5Have your system manager contact HP Customer Support.fdw!`14@MULDEFTYPE, symbol 'symbol-name' has subsequent type definition module: 'module-name' file: 'file-name'inker UtilityThe language processor has emitted a non-symbolic reference to1a group section from a section outside the group.5Have your system manager contact HP Customer Support. fg!61\EORPHNLNKG, linkage found in psect 'section-name' for symbol 'symbol- name' not found module: 'module-name' file: 'file-name'inker UtilityThe linker found the name of an overlaid section (in the image:that was being linked) in a shareable image, but could not=overlay it on the shareable image because it was initialized.>There is no relocation for the image being linked which allowslinker can overlay it with the shareable image. Or, relink the7shareable image so that it does not export the section.f+ne!d61=DOUTOFORDER, a VMS_CALL_SIG relocation was not followed by a PCREL21& relocation - bad compilerD relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility9A rule in the design of the Executable And Linking Format4(ELF) object language states that every VMS_CALL_SIGNOGLOSYM, 'symbol-name' (index 'decimal-number') not found in# linker's global databaseD relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility6The linker was processing an object module and found a:relocation for a symbol that was not defined by the object#module. This is a compiler problem.5Have your system manager contact HP Customer Support.fp!mG1r4USEUNDEF, undefined symbol 'symbol-name' referenced section: 'section-name'< offset: %X'hexadecimal-number' slot: 'decimal-number' module: 'module-name' file: 'file-name'inker Utility7An undefined symbol was referenced by a relocation. The4section and offset give the source of the reference.=Include the object module that defines the symbol in the linkcommand.fq[!61BCOMMON, warning: 'symbol-name' is a common symbol (this file will not execute properly)D relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility;In the Executable and Linking Format (ELF) object language,>symbols which are common must be global so that all the common=symbols that have the same name receive the same storage. The;linker found one that is local. This is a compiler problem.5Have your system manager contact HP Customer Support.fr_!,61@NOLOCALSYM, 'symbol-name' (index 'decimal-number') not found in$ linker's local databaseD relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility!61o|/eDRELOSHRIMG, symbol 'symbol-name' not resolved from within the imageD relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utilitydefinition of a symbol come from a shareable image. The linker6found this to be the case. This is a compiler problem.5Have your system manager contact HP Customer Support.fqt-!1^k3NORELOBW, cannot do a relocation on a byte or wordD relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility=The linker received a relocation for a symbol that was a byte;or a word in length. The linker relocates symbols, and then>passes that relocation to the image activator in case it wantsThere are some relocations that require that the target symbol:be in a short data section. In this case, the linker found;a symbol that was from a normal section. This is a compilerproblem.5Have your system manager contact HP Customer Support.fvh!p19NOTAFUNC, local symbol 'symbol-name' is not a function -4 'relocation-type' relocations require oneD relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility>Some relocations require that the definition of a local symbol=is a function so that the linker's internal database contains;a descriptor for it. Then, the linker will be able to storethat have the phrase 'FPTR' in the name. If that relocation isto be within 21 bits of the original call. This is an internal>linker error: either the trampoline section has been misplaced'or a trampoline section was never made.5Have your system manager contact HP Customer Support.fN{\!61*`DP0SIGNULL, a VMS_CALL_SIG relocation was received, but there was no signature sectionD relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility1The linker found a VMS_CALL_SIG relocation but no;corresponding signature section. This is either an internal!linker error or a compiler error.5Have your system manager contact HP Customer Support.f|f!G1nEUSEUNDEFACC, undefined symbol referenced by 'symbol-name' relocation& undefined symbol: 'symbol-name'D relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility:The linker has found a load or an operation relocation for9an undefined symbol. This is similar to USEUNDEF, but the:relocation is one specific to OpenVMS for implementing RunTime Complex Expressions.=Include the object module that defines the symbol in the linkcommand.f}r! 61@NOTINACC, symbols defined in sections overlaid with a shareable7 image can not be operated on ('symbol-name')D relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility;Local symbols, by definition, are never resolved outside of;the object module where they originated. In this case, theyimage, which is not possible. This is an internal linker erroror a compiler error.5Have your system manager contact HP Customer Support. f~X!T61 EBADACC, relocation was out of order - accumulator operation not done - bad compiler!D relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility=OpenVMS has an extension to the Executable and Linking Format9(ELF) object language that requires that Run Time Complex8Expression relocations be in the following order: a load;relocation, an operation expression relocation, and a store>relocation. This error was issued because the relocations were'not in order. This is a compiler error.5Have your system manager contact HP Customer Support.!!f!61|.ONLYOPR, relocation must be 'relocation-type', 'symbol-origin' symbol: 'symbol-name', 'symbol-origin' symbol: 'symbol-name'D relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility=OpenVMS has an extension to the Executable and Linking Format;(ELF) object language for Run Time Complex Expressions that9has the following rules: If both symbols are relocatable,9the only operand allowed is subtraction. If one symbol is8absolute and the other is relocatable, the only operands9allowed are addition and subtraction. If the first symbol:is from a shareable image, and the second is absolute, the:only operands allowed are addition and subtraction. If the;first symbol is absolute and the second is from a shareablecame across any conditions that fall outside these rules, this,error is produced. It is a compiler problem.5Have your system manager contact HP Customer Support.""f:!1LEACCTWOSHR, in this operation, both symbols cannot be resolved from a shareable image& shareable symbol: 'symbol-name'& shareable symbol: 'symbol-name'D relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility=OpenVMS has an extension to the Executable and Linking Format;(ELF) object language for Run Time Complex Expressions that>has the following rule: Both symbols in one expression can notbe defined by shareable images.17(DIVBYZERO, division by zero not allowed% dividend symbol: 'symbol-name'$ divisor symbol: 'symbol-name'D relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility=A Run Time Complex Expressions with the division operator hasa zero divisor.=Check the source or the listings and correct the calculation.%%fMm!Rb1_@MORETHAN, results of the operation were more than the 'storage-2 length' stored : %X'hexadecimal-number'D relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility=OpenVMS has an extension to the Executable and Linking Format;(ELF) object language for Run Time Complex Expressions that8has four storage commands: store byte, store word, store;longword and store quadword. If the result of the operation=does not fit in the size of the storage being declared in the$relocation, this error is displayed.=Extend the amount of storage in the declaration of the symbol#referenced by the store relocation.&&fW!N613i?NOTPMTIDX, 'symbol-type' symbol (index 0x'hexadecimal-number')0 encountered when trying to index PMT module: 'module-name' file: 'file-name'inker Utility>The section index is not identifiable as a valid section indexby the linker.5Have your system manager contact HP Customer Support.''fu!61>ZEROSEC, internal linker data structure was unexpectedly zero module: 'module-name' file: 'file-name'inker Utility;The linker builds an internal database from which a modules8section header table index can be converted into virtual;and physical addresses for the section and segment to which:it applies. The linker returns this error when the section2address is zero. This is an internal linker error.5Have your system manager contact HP Customer Support.((f! 61.BZEROISL, internal linker data structure was unexpectedly zero for section 'section-name' module: 'module-name' file: 'file-name'inker Utilityrelocation must be zero. The linker found this not to be true.This is a compiler problem.5Have your system manager contact HP Customer Support.++fi!61e@SHRINOFF, linker internal error - an official FD was made for a. symbol defined by a shareable imageD relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility6The linker discovered that a procedure is defined in a8shareable image when it was in the process of creating a;function descriptor for it. This is an internal linker or acompiler problem.5Have your system manager contact HP Customer Support.,,fj?!"1p}|>CMDTOOLONG, command line too long in options file 'file-name'inker Utility!An options file line is too long.;Shorten the line and relink. If the line is a SYMBOL_VECTOR=option, you can break the line into two or more SYMBOL_VECTOR9options, but keep those option lines in the same order to(preserve the order of the symbol vector.--f'!{/1Xe&OPTBASNOT, option 'BASE=' not allowedinker Utility=The linker found a BASE= option statement in a linker optionsA symbol defined by the SYMBOL= option cannot be included as a4symbol vector entry using the SYMBOL_VECTOR= option.OPTIGNELF, option ignored, not allowed for OpenVMS ELF imagesinker Utility4The option being used does not apply for OpenVMS I644Executable and Linking Format (ELF) link operations.5Remove the option and issue the link operation again.77fv!91APSCATTIGN, psect attribute 'attribute-name' is not supported for3 OpenVMS ELF sections, attribute ignoredinker Utility=Not all attributes for OpenVMS Alpha and VAX program sections8apply to OpenVMS I64 Executable and Linking Format (ELF);program sections. The attribute specified does not apply to!OpenVMS I64 ELF program sections.8Remove the attribute and issue the link operation again.88fa!)91BPSCATTOPT, psect attribute 'attribute-name' is not user settable, attribute ignoredinker Utility(You can not set the indicated attribute.8Remove the attribute and issue the link operation again.99fZ!1lEPSCALIOPT, psect 'section-name' alignment ('decimal-number') exceeds0 page size, reset to 'decimal-number' options file: 'file-name'inker Utility>The specified program section (psect) is aligned on a boundary>of greater granularity than the size of the page specified for=the image. The linker reset the alignment of the psect to thesize of the page.:None required. If you require a psect alignment of greater>granularity, relink the image and specify the /BPAGE qualifier>with a value equal to or greater than the granularity requiredfor the psect.::f/!1`m.OPTIGNSHR, option ignored for shareable imageinker Utilityshareable image. The linker ignores the option when creating ashareable image.None.;;f{g!px1CNOTVECTYET, NOTVECTORED = 'symbol-name' encountered before VECTOR_" TABLE option, ignoredinker Utilitythe link. Compatible compilers may be required to create both.>Contact the providers of the objects and images to resolve the conflict.d!61hCMSSNGOMD, linker internal error - symbol 'symbol-name' defined but has no owning moduleinker Utility7The linker cannot find the defining module of the known9symbol. Symbols with their defining module names are keptshareable image. This message indicates a problem in the inputshareable image.7Verify the shareable image. Contact the provider of the,shareable image file to resolve the problem.e!1wCMULPSCINI, multiple initializations for overlaid section 'section- name'. shareable image: 'shareable-image-name'inker UtilityMake sure that different shareable images use different global;symbol table names. When linking the shareable images these9names are constructed out of the image file specification;name. If the shareable image file and the vector table file;are the same, make sure that both input files are specified the same way.1!+\1bo0EMPTYFILE, no modules found in file 'file-name'inker Utility*An object file contains no object modules.:Ensure that the source file compiled properly and that the output object file is not empty.>!7W1o| $NOTELFMSK, not ELF format mask file file: 'file-name'inker Utility6The mask input file is not an OpenVMS I64 object file.BBOUNDINUSE, procedure 'function-name' already has FD, cannot bind6 its FD to 'symbol-name' via 'symbol-name'inker Utility9The named symbol in a BOUND_PROCEDURE= option already has8an FD defined. This is probably caused by a call to that:procedure from any code in the linked objects. Binding the8symbol and calling it in the same image is not possible.6Consult the cross reference table in the linker map to;determine if the procedure is called. Remove the call or do+not use this symbol in the call and relink.c!$1{@BNDSYMVEC, bound procedure 'function-name' does not appear in a! SYMBOL_VECTOR= optioninker Utilityhas to be an entry in the symbol vector and it has to be bound!with the BOUND_PROCEDURE= option.#Adjust the options file and relink. 5!t61fs4CLUNOSDATA, no short data in cluster 'cluster-name'inker Utility8The linker cannot find a short data segment in the named:cluster. The message indicates an internal linker problem.5Have your system manager contact HP Customer Support.lf!jp1~BINSVIRMEM, insufficient virtual memory for 'decimal-number' pages" for cluster: 'cluster-name'inker Utility7The linker cannot allocate enough virtual memory in the1resulting image to contain the specified cluster.:Consult a /FULL map to determine why the linker ran out of4virtual memory; then correct the problem and relink.{P!61Woption or in a /BPAGE qualifier value. This may also be caused6by a language generator producing a too big alignment.=Depending on the cause, set an appropriate alignment with the>PSECT_ATTRIBUTE option or adjust the target page size with the>/BPAGE qualifier. For problems caused by a language generator,>have your system manager contact the support representative ofthe language generator.ptor and share it among later relocationsthat have the phrase 'FPTR' in the name. If that relocation isto be within 21 bits of the original call. This is an internal>linker error: either the trampoline section has been misplaced'or a trampoline section was never made.5Have your system manager contact HP Customer Support.fN{\!61*`DP0SIGNULL, a VMS_CALL_SIG relocation was received, but there was no signature sectionD relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility1The linker found a VMS_CALL_SIG relocation but no;corresponding signature section. This is either an internal!linker error or a compiler error.5Have your system manager contact HP Customer Support.f|f!G1nEUSEUNDEFACC, undefined symbol referenced by 'symbol-name' relocation& undefined symbol: 'symbol-name'D relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility:The linker has found a load or an operation relocation for9an undefined symbol. This is similar to USEUNDEF, but the:relocation is one specific to OpenVMS for implementing RunTime Complex Expressions.=Include the object module that defines the symbol in the linkcommand.f}r! 61@NOTINACC, symbols defined in sections overlaid with a shareable7 image can not be operated on ('symbol-name')D relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility;Local symbols, by definition, are never resolved outside of;the object module where they originated. In this case, theyimage, which is not possible. This is an internal linker erroror a compiler error.5Have your system manager contact HP Customer Support. f~X!T61 EBADACC, relocation was out of order - accumulator operation not done - bad compiler!D relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility=OpenVMS has an extension to the Executable and Linking Format9(ELF) object language that requires that Run Time Complex8Expression relocations be in the following order: a load;relocation, an operation expression relocation, and a store>relocation. This error was issued because the relocations were'not in order. This is a compiler error.5Have your system manager contact HP Customer Support.!!f!61|.ONLYOPR, relocation must be 'relocation-type', 'symbol-origin' symbol: 'symbol-name', 'symbol-origin' symbol: 'symbol-name'D relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility=OpenVMS has an extension to the Executable and Linking Format;(ELF) object language for Run Time Complex Expressions that9has the following rules: If both symbols are relocatable,9the only operand allowed is subtraction. If one symbol is8absolute and the other is relocatable, the only operands9allowed are addition and subtraction. If the first symbol:is from a shareable image, and the second is absolute, the:only operands allowed are addition and subtraction. If the;first symbol is absolute and the second is from a shareablecame across any conditions that fall outside these rules, this,error is produced. It is a compiler problem.5Have your system manager contact HP Customer Support.""f:!1LEACCTWOSHR, in this operation, both symbols cannot be resolved from a shareable image& shareable symbol: 'symbol-name'& shareable symbol: 'symbol-name'D relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility=OpenVMS has an extension to the Executable and Linking Format;(ELF) object language for Run Time Complex Expressions that>has the following rule: Both symbols in one expression can notbe defined by shareable images.17(DIVBYZERO, division by zero not allowed% dividend symbol: 'symbol-name'$ divisor symbol: 'symbol-name'D relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility=A Run Time Complex Expressions with the division operator hasa zero divisor.=Check the source or the listings and correct the calculation.%%fMm!Rb1_@MORETHAN, results of the operation were more than the 'storage-2 length' stored : %X'hexadecimal-number'D relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility=OpenVMS has an extension to the Executable and Linking Format;(ELF) object language for Run Time Complex Expressions that8has four storage commands: store byte, store word, store;longword and store quadword. If the result of the operation=does not fit in the size of the storage being declared in the$relocation, this error is displayed.=Extend the amount of storage in the declaration of the symbol#referenced by the store relocation.&&fW!N613i?NOTPMTIDX, 'symbol-type' symbol (index 0x'hexadecimal-number')0 encountered when trying to index PMT module: 'module-name' file: 'file-name'inker Utility>The section index is not identifiable as a valid section indexby the linker.5Have your system manager contact HP Customer Support.''fu!61>ZEROSEC, internal linker data structure was unexpectedly zero module: 'module-name' file: 'file-name'inker Utility;The linker builds an internal database from which a modules8section header table index can be converted into virtual;and physical addresses for the section and segment to which:it applies. The linker returns this error when the section2address is zero. This is an internal linker error.5Have your system manager contact HP Customer Support.((f! 61.BZEROISL, internal linker data structure was unexpectedly zero for section 'section-name' module: 'module-name' file: 'file-name'inker Utilityrelocation must be zero. The linker found this not to be true.This is a compiler problem.5Have your system manager contact HP Customer Support.++fi!61e@SHRINOFF, linker internal error - an official FD was made for a. symbol defined by a shareable imageD relocation section: 'relocation section-name' (section header entry: 'decimal-number' ). relocation type: 'relocation type-name'2 relocation entry: 'relocation index-number' module: 'module-name' file: 'file-name'inker Utility6The linker discovered that a procedure is defined in a8shareable image when it was in the process of creating a;function descriptor for it. This is an internal linker or acompiler problem.5Have your system manager contact HP Customer Support.,,fj?!"1p}|>CMDTOOLONG, command line too long in options file 'file-name'inker Utility!An options file line is too long.;Shorten the line and relink. If the line is a SYMBOL_VECTOR=option, you can break the line into two or more SYMBOL_VECTOR9options, but keep those option lines in the same order to(preserve the order of the symbol vector.--f'!{/1Xe&OPTBASNOT, option 'BASE=' not allowedinker Utility=The linker found a BASE= option statement in a linker optionsA symbol defined by the SYMBOL= option cannot be included as a4symbol vector entry using the SYMBOL_VECTOR= option.OPTIGNELF, option ignored, not allowed for OpenVMS ELF imagesinker Utility4The option being used does not apply for OpenVMS I644Executable and Linking Format (ELF) link operations.5Remove the option and issue the link operation again.77fv!91APSCATTIGN, psect attribute 'attribute-name' is not supported for3 OpenVMS ELF sections, attribute ignoredinker Utility=Not all attributes for OpenVMS Alpha and VAX program sections8apply to OpenVMS I64 Executable and Linking Format (ELF);program sections. The attribute specified does not apply to!OpenVMS I64 ELF program sections.8Remove the attribute and issue the link operation again.88fa!)91BPSCATTOPT, psect attribute 'attribute-name' is not user settable, attribute ignoredinker Utility(You can not set the indicated attribute.8Remove the attribute and issue the link operation again.99fZ!1lEPSCALIOPT, psect 'section-name' alignment ('decimal-number') exceeds0 page size, reset to 'decimal-number' options file: 'file-name'inker Utility>The specified program section (psect) is aligned on a boundary>of greater granularity than the size of the page specified for=the image. The linker reset the alignment of the psect to thesize of the page.:None required. If you require a psect alignment of greater>granularity, relink the image and specify the /BPAGE qualifier>with a value equal to or greater than the granularity requiredfor the psect.::f/!1`m.OPTIGNSHR, option ignored for shareable imageinker Utilityshareable image. The linker ignores the option when creating ashareable image.None.;;f{g!px1CNOTVECTYET, NOTVECTORED = 'symbol-name' encountered before VECTOR_" TABLE option, ignoredinker UtilityThere are inconsistencies in the structure of the fixup vector9in the image. This usually indicates a corrupt or invalidimage.Relink the image.;1lo:SYMVECMIS, shareable image's symbol vector table mismatchtor8There is an inconsistency between a shareable image that8was activated at run time and information used to create;an image that calls it. If the calling image is native, the:inconsistency is with the shareable image that the calling=image was linked against. If the calling image is translated,>the inconsistency is with the shareable image's .IIF file used,during the translation of the calling image.9Link the calling image against the correct version of theThe image header type word contains an invalid type code. This-usually indicates a corrupt or invalid image.Relink the image./5|1fi4ISD_OFF, image section descriptor offset is invalidtor9The offset in an image header block points beyond the end:of that block. This usually indicates a corrupt or invalidimage.Relink the image.0$K1UX,#BADSVINDX, bad symbol vector indextorRelink the executable images to achieve a consistent shareable>image linkage mechanism within the image header of your image. B 4p1eh3IMG_SIZ, image header descriptor length is invalidtorIn the case of a BAD_LINK error, a native image that is linked4/NATIVE_ONLY attempted to call a translated routine.;In the case of a SYMVECMIS error, there is an inconsistencyAn error has occurred while closing the process dump file. The:messages that follow provide additional data on the error.4If the cause of the error can be understood from theNone. This is an informational message from SYS$SYSTEM:IMGDMP_RIGHTS.{ib1BDELETED, rights identifier 'id' with incorrect value ('value') or% attributes ('name') deleted;The specified rights identifier has been deleted because it%has an incorrect value or attributes.>None. This is an informational message from SYS$SYSTEM:IMGDMP_=RIGHTS, which will then automatically recreate the identifier&with the correct value and attributes.-};81ll?:EXPREG, SYS$EXPREG_64 returned fewer pages than requested7This is a supplementary message for the BADLOGIC error.:Check whether the process has sufficient pagefile quota to9write the process dump. If this does not appear to be the%problem, contact HP Customer Support.81 &>FETCHERROR, unexpected error fetching data from 'address1' toC 'address2', length 'm', requested at PC 'n'; condition code = 'status'7This is a supplementary message for the BADLOGIC error.Contact HP Customer Support.7&|v1WWI%NOEXTEND, error extending 'filename'8An error occurred while extending the process dump file.;Secondary messages provide additional information about theerror.:If possible, correct the error based on information in the:secondary message. Otherwise, contact HP Customer Support.S81ENOREAD, no access to location 'address', length 'm', requested at PC 'n'7This is a supplementary message for the BADLOGIC error.Contact HP Customer Support.m81BNOWRITE, bad fetch target; no write access to location 'address',) length 'm', requested at PC 'n'7This is a supplementary message for the BADLOGIC error.Contact HP Customer Support.Q81BNOZERO, inconsistency found while zeroing unwanted data - no more data7This is a supplementary message for the BADLOGIC error.Contact HP Customer Support.5-sv1^^G,OPENOUT, error opening 'filename' as output6An error occurred while opening the process dump file.;Secondary messages provide additional data about the error.:If possible, correct the error based on information in the:secondary message. Otherwise, contact HP Customer Support. i19BPRIVIMAGE, image has elevated privileges; requires SYS$PROTECTED_% PROCDMP or IMGDMP$READALL;An attempt was made to dump a process running an image that=was installed with higher privileges than the process, or the$process is in a protected subsystem.;Use AUTHORIZE to grant the IMGDMP$READALL identifier to the:process if the user is trusted. Otherwise, refer to the HP>OpenVMS System Manager's Manual, Volume 2: Tuning, Monitoring,=and Complex Systems and read the chapter about Managing Page,:Swap, and Dump Files for information about how to set up aspecified) and reenter the command, specifying a device on the host system.&&:0!1ae/BADLABELQ, invalid keyword on /LABEL qualifiermand>An invalid keyword is specified with the /LABEL qualifier. Theonly valid keyword is:0 /LABEL=VOLUME_ACCESSIBILITY:"single-character" Correct and reenter the command.''?'b1NRyUNKDEV, unknown device typemand&The device type is unknown or invalid.=Correct the device name (or logical name if a logical name is#specified) and reenter the command.((_E5 1fjq4LIMITCHANGED, value for /LIMIT increased to 'value'mand8The value specified for /LIMIT was less than the minimum8allowed. The minimum allowed value is the largest of the following: o The value supplied with /LIMITo The physical disk size5o The size resulting from a 256-block BITMAP.SYS file. (256 * 4096 bits/block * Disk Cluster Value);This is an informational message and no action is required.The INITIALIZE command cannot allocate space on the volume for=the index file. Possibly too much space is requested for fileheaders.3Specify a smaller value for the /HEADERS qualifier.++R7:K1hl6BADWINDOWS, value for /WINDOWS qualifier out of rangemand9The value supplied for the /WINDOWS qualifier is invalid.>Execute the command again specifying a value in the range of 7 through 80.,,[41eiU,3MAXBAD, bad block table overflow for 'device-name'mandcommand INITIALIZE cannot initialize the volume, or the Backup9utility cannot process the volume. This message generally5indicates that the disk volume can no longer be used.:Check the status of the device and reenter the command. If:the failure persists, reformat the disk. Notify the system;manager. If the failure still persists and the disk pack is$under warranty, return it to Compaq.-- m0;1ae/BADOVR, unknown keyword on /OVERRIDE qualifiermand:The command syntax for the /OVERRIDE qualifier is invalid.9Enter the DCL command HELP or refer to the HP OpenVMS DCL;Dictionary for the legal keywords, then enter the correctedcommand...u >1os=FACTBAD, cannot read factory bad block data on 'device-name'mand7Either the Backup utility or the DCL command INITIALIZEMTLBLLONG, label specified for 'device-name' is longer than 6 charactersmand/The label specified for the device is too long.Respecify the label.00~[?1CMTLBLNONA, label specified for 'device-name' contains non-ANSI "a" charactersmand7Invalid ANSI "a" characters are specified in the volumelabel.>Reenter the command with valid ANSI "a" characters. Valid ANSI:"a" characters are numbers 0 through 9, uppercase letters,$space, and the following characters:#! " % & ' ( ) * + ,-. / : ; < = > ?11 $!1UY(#INDEX, invalid index file positionmand.1os'=NOTSTRUC1, qualifier(s) not available with structure level 1mand:You used qualifiers requesting features not available with=Files-11 On-Disk Structure Level 1 (for example, /CLUSTER and /DATACHECK).-Use structure level 2 or omit the qualifiers.66|$!1UYm#CLUSTER, unsuitable cluster factormand>The cluster size specified for an INITIALIZE command is either:too small or too large for the volume. The maximum clustercommand. If the list of blocks is long, place the command in acommand procedure file.::n1MQBADUIC, invalid UIC syntaxmand9The command contains an invalid UIC. The group and member>portions of a UIC must both be specified and be separated by a6comma, or a valid rights identifier must be specified.9Enter the DCL command HELP or refer to the HP OpenVMS DCL;Dictionary for the correct syntax, then enter the correctedcommand.;;*?1[_&)LARGECNT, disk too large to be supportedmand8This version of Files-11 does not support a disk of thissize.>Check the device driver to determine if it is initializing the>device database correctly. You may need Compaq-supplied custom software.<<]1OSXBADVOL1, bad VOL1 ANSI labelmand9The protection encoded on a magnetic tape volume label is=invalid or the label itself is invalid; the magnetic tape ACP=cannot process the tape. Or, the tape is defective; it is not;an ANSI-labeled tape, or the hardware device is not readingthe tape properly.9Verify the tape volume. If necessary, mount the tape as a"foreign volume and try to read it.==Cg1txBBADVOLACC, invalid value on /LABEL=VOLUME_Accessibility qualifiermand8An invalid ANSI "a" character is specified in the volume-accessibility field of the tape volume label.:Specify a valid ANSI "a" character in the single-character;field of the command. Valid ANSI "a" characters are numbers80 through 9, uppercase letters, space, and the following characters:#! " % & ' ( ) * + ,-. / : ; < = > ?>>f5G1fjx4BADVOLLBL, invalid value for ANSI tape volume labelmand8There are one or more invalid ANSI "a" characters in the volume label.6Respecify the command with a valid ANSI "a" character. ???4Q!1ei3BADDATCHK, invalid keyword on /DATACHECK qualifiermand:The keyword specified for the /DATACHECK qualifier must beeither READ or WRITE. Correct and reenter the command.@@.!1_c-BADDENS, unknown value on /DENSITY qualifiermandINIT encountered at least one error when it attempted to erase the volume..Take action based on the accompanying message.BB 5}1fjP4ILLOPT, qualifier(s) not appropriate to this devicemand>A MOUNT or INITIALIZE command specifies qualifiers that do not;apply to this device type or medium. Certain qualifiers are=applicable only to magnetic tape, or only to disk, or only to,the ISO 9660 or High Sierra file structures.5Enter the HELP command or refer to the HP OpenVMS DCL=Dictionary for a list of qualifiers, then enter the correctedcommand.CCPSMB, Input Symbio"2'1SU!INVUSER, invalid username 'name'nt1The specified user name is syntactically invalid.&Correct the error and reenter the job.DD+$f'1UW#MISSPASS, missing PASSWORD commandnt9A batch job entered from a card reader does not contain a+PASSWORD command following the JOB command.&Correct the error and reenter the job.EEA$p'1UW#INVCONT, invalid line continuationnt>In a batch job entered from a card reader, a continued line is0followed by a line beginning with a dollar sign.&Correct the error and reenter the job.FF [01ac/OPENUAF, error opening user authorization filent>The system cannot open the user authorization file to validate8a batch job entered from a card reader. The accompanying(message provides additional information.See your system manager.GG"/1SU,!JOBCARD, job beginning 'command'ntThe system encountered an error creating a batch job from card reader input.=Take action based on information in the accompanying message,then reenter the job.LLSTALL, Install Uti$,C91]a+NOCMK, operation requires CMKRNL privilegelity7The CMKRNL privilege is needed to perform the requested operation.8Exit INSTALL and enter the command SET/PROC/PRIV=CMKRNL.MM)>k1osE=MISSLNKQUAL, image was not linked with /SECTION_BINDING=CODElity,The image was not linked using the qualifier=/SECTION_BINDING=CODE. Specifying this qualifier ensures that>the linker does not optimize calls between code image sections'by using a relative branch instruction.+Either relink the image using the qualifier>/SECTION_BINDING=CODE or do not install the image as resident.NN/1/1bf0REMOVED, entry for 'file-spec' has been removedlity.The known file entry was removed successfully.None.OO7CH1txBNONRES, installed image non-resident with other specified optionslity7The image has been successfully installed, but not as aresident image.None.PP; ,E/1]a+IMGHDR, error while accessing image headerlity/SECTION_BINDING=DATA or do not install the image as resident.TT~C ^T1<BIMGTRACED, /TRACEBACK image cannot be privileged, execute_only or resident imagelity:An attempt is made to create or replace a known file image>with either the /PRIVILEGE or /EXECUTE_ONLY qualifier, and the.image is linked with the /TRACEBACK qualifier.;Relink the image using the /NOTRACEBACK qualifier and retrythe image installation.UUL;V1lp:NOPAGEDYN, unable to allocate enough paged dynamic memorylity;INSTALL cannot complete the operation because paged dynamicmemory is not accessible.Contact your system manager.VVQOA1rvsc@NODELSHRADR, unable to delete image with shareable address datality=The Install utility cannot delete an image that was installed5with shareable address data. The following images are:automatically installed this way when the SYSGEN parameterA Known File Entry is created by means of the REPLACE command,None. The use of REPLACE implies that an old entry is expectedto exist, but did not exist.ZZd#!1LPsIVQUAL, invalid qualifierlity"An invalid qualifier is specified. Correct and reenter the command.[[k4S-1ei3SYSVERDIF, system version mismatch - please relinklity;The image being installed is not linked against the currentversion of the system.,Relink the image and retry the installation.\\8m 1qs1bfJ0HDRNOTRES, unable to make image header residentlity>Insufficient pool is available to make the header resident, or1the file has an image header larger than 1 block.;Use the SYSGEN parameter PAGEDYN to increase the pool. Only6files with 1-block image headers may be made resident.]]s $1UYx#HELP, enter /HELP for INSTALL helplityThis message is informational.Enter HELP for INSTALL help.^^w 6R/1gk5FAIL, failed to 'execute-verb' entry for 'file-spec'lityM41os=NONSHRADR, image installed ignoring '/SHARE=ADDRESS' 'image'lity>The named image was successfully installed, but without shared address data.9An accompanying message indicates why the image could not:be installed with shared address data. No immediate action9is required. To avoid this message in the future, you can>intentionally install the image without shared address data orWhile a protected shared image was being installed with shared:address data, an attempt was made to reference an unmappedaddress.message identifies an image that is referenced, but is not yet installed.to install an image with shareable address data, all shareable>images that the image is linked against must also be installedwith shareable address data.=Ensure that the image named in this message is installed with:shared address data before attempting to install the imagenamed in the NONSHRADR message.#?1pt(>NOTSHRSYMVEC, symbol vector is not in NONSHRADR image sectionlity3This message accompanies the NONSHRADR message. The9NOTSHRSYMVEC message indicates that the symbol vector for:the image is in a writable data section and cannot be made shareable.new known file entry for any reason, this message is displayed8to explicitly declare that the previous known file entry8has been successfully removed. This message is a warning:explaining why even the old entry no longer exists in case%REPLACE failed to create a new entry.None. #%'1VZ$NOSHRD, file can not be made sharedlity;Only native-mode and compatibility-mode images supported by;the AME and provided by VAX-11 RSX systems are supported asshareable known files.&Reinstall without the /SHAR qualifier. #1(!1bf0INVPRVNAM, 'privilege' is not a valid privilegelity'An invalid privilege name is specified. Correct and reenter the command. #&541W[%NOKFEFND, Known File Entry not foundlity4There is no known file entry for the specified file.3Use /LIST to see what entries are in the file list. #1gB1bf0NOVER, no file version obtained for 'file-spec'lity:INSTALL cannot obtain the file version number of the image+file for the known file entry being listed.5Ensure that the image file exists, and check the file protection.#/+jw1\`A*NOLIST, there is no Known File Entry Listlity:The known file entry list is not created. Therefore, LIST,.DELETE, REMOVE, and PURGE will have no effect.1ae3q/ILLFILEVER, file version numbers not permittedlity4An explicit version number was specified in a remove9operation. Only one version of a file can be installed at>one time, so specifying a version number on a remove operationcan produce unintended results.=Reenter the command without specifying a file version number.#Cz11tx#BNOLOAD, network and sequentially loaded files are not installablelity>Known file entries cannot be created for files that are stored:on magnetic tape or that are accessible through a network.0Transfer the file to a disk and then install it.# #'1TX"INTRNLERR, Internal Error: 'code'lity&INSTALL encountered an internal error.Contact HP Customer Support.#A4L1rv@PLSREBOOT, please reboot to install a new version of this imagelity3This informational message accompanies NODELSHRADR.=You must reboot the system to replace an image installed withAn error has occurred while closing the process dump file. The:messages that follow provide additional data on the error.4If the cause of the error can be understood from theNone. This is an informational message from SYS$SYSTEM:IMGDMP_RIGHTS.{ib1BDELETED, rights identifier 'id' with incorrect value ('value') or% attributes ('name') deleted;The specified rights identifier has been deleted because it%has an incorrect value or attributes.>None. This is an informational message from SYS$SYSTEM:IMGDMP_=RIGHTS, which will then automatically recreate the identifier&with the correct value and attributes.-};81ll?:EXPREG, SYS$EXPREG_64 returned fewer pages than requested7This is a supplementary message for the BADLOGIC error.:Check whether the process has sufficient pagefile quota to9write the process dump. If this does not appear to be the%problem, contact HP Customer Support.81 &>FETCHERROR, unexpected error fetching data from 'address1' toC 'address2', length 'm', requested at PC 'n'; condition code = 'status'7This is a supplementary message for the BADLOGIC error.Contact HP Customer Support.7&|v1WWI%NOEXTEND, error extending 'filename'8An error occurred while extending the process dump file.;Secondary messages provide additional information about theerror.:If possible, correct the error based on information in the:secondary message. Otherwise, contact HP Customer Support.S81ENOREAD, no access to location 'address', length 'm', requested at PC 'n'7This is a supplementary message for the BADLOGIC error.Contact HP Customer Support.m81BNOWRITE, bad fetch target; no write access to location 'address',) length 'm', requested at PC 'n'7This is a supplementary message for the BADLOGIC error.Contact HP Customer Support.Q81BNOZERO, inconsistency found while zeroing unwanted data - no more data7This is a supplementary message for the BADLOGIC error.Contact HP Customer Support.5-sv1^^G,OPENOUT, error opening 'filename' as output6An error occurred while opening the process dump file.;Secondary messages provide additional data about the error.:If possible, correct the error based on information in the:secondary message. Otherwise, contact HP Customer Support. i19BPRIVIMAGE, image has elevated privileges; requires SYS$PROTECTED_% PROCDMP or IMGDMP$READALL;An attempt was made to dump a process running an image that=was installed with higher privileges than the process, or the$process is in a protected subsystem.;Use AUTHORIZE to grant the IMGDMP$READALL identifier to the:process if the user is trusted. Otherwise, refer to the HP>OpenVMS System Manager's Manual, Volume 2: Tuning, Monitoring,=and Complex Systems and read the chapter about Managing Page,:Swap, and Dump Files for information about how to set up aspecified) and reenter the command, specifying a device on the host system.&&:0!1ae/BADLABELQ, invalid keyword on /LABEL qualifiermand>An invalid keyword is specified with the /LABEL qualifier. Theonly valid keyword is:0 /LABEL=VOLUME_ACCESSIBILITY:"single-character" Correct and reenter the command.''?'b1NRyUNKDEV, unknown device typemand&The device type is unknown or invalid.=Correct the device name (or logical name if a logical name is#specified) and reenter the command.((_E5 1fjq4LIMITCHANGED, value for /LIMIT increased to 'value'mand8The value specified for /LIMIT was less than the minimum8allowed. The minimum allowed value is the largest of the following: o The value supplied with /LIMITo The physical disk size5o The size resulting from a 256-block BITMAP.SYS file. (256 * 4096 bits/block * Disk Cluster Value);This is an informational message and no action is required.The INITIALIZE command cannot allocate space on the volume for=the index file. Possibly too much space is requested for fileheaders.3Specify a smaller value for the /HEADERS qualifier.++R7:K1hl6BADWINDOWS, value for /WINDOWS qualifier out of rangemand9The value supplied for the /WINDOWS qualifier is invalid.>Execute the command again specifying a value in the range of 7 through 80.,,[41eiU,3MAXBAD, bad block table overflow for 'device-name'mandcommand INITIALIZE cannot initialize the volume, or the Backup9utility cannot process the volume. This message generally5indicates that the disk volume can no longer be used.:Check the status of the device and reenter the command. If:the failure persists, reformat the disk. Notify the system;manager. If the failure still persists and the disk pack is$under warranty, return it to Compaq.-- m0;1ae/BADOVR, unknown keyword on /OVERRIDE qualifiermand:The command syntax for the /OVERRIDE qualifier is invalid.9Enter the DCL command HELP or refer to the HP OpenVMS DCL;Dictionary for the legal keywords, then enter the correctedcommand...u >1os=FACTBAD, cannot read factory bad block data on 'device-name'mand7Either the Backup utility or the DCL command INITIALIZEMTLBLLONG, label specified for 'device-name' is longer than 6 charactersmand/The label specified for the device is too long.Respecify the label.00~[?1CMTLBLNONA, label specified for 'device-name' contains non-ANSI "a" charactersmand7Invalid ANSI "a" characters are specified in the volumelabel.>Reenter the command with valid ANSI "a" characters. Valid ANSI:"a" characters are numbers 0 through 9, uppercase letters,$space, and the following characters:#! " % & ' ( ) * + ,-. / : ; < = > ?11 $!1UY(#INDEX, invalid index file positionmand.1os'=NOTSTRUC1, qualifier(s) not available with structure level 1mand:You used qualifiers requesting features not available with=Files-11 On-Disk Structure Level 1 (for example, /CLUSTER and /DATACHECK).-Use structure level 2 or omit the qualifiers.66|$!1UYm#CLUSTER, unsuitable cluster factormand>The cluster size specified for an INITIALIZE command is either:too small or too large for the volume. The maximum clustercommand. If the list of blocks is long, place the command in acommand procedure file.::n1MQBADUIC, invalid UIC syntaxmand9The command contains an invalid UIC. The group and member>portions of a UIC must both be specified and be separated by a6comma, or a valid rights identifier must be specified.9Enter the DCL command HELP or refer to the HP OpenVMS DCL;Dictionary for the correct syntax, then enter the correctedcommand.;;*?1[_&)LARGECNT, disk too large to be supportedmand8This version of Files-11 does not support a disk of thissize.>Check the device driver to determine if it is initializing the>device database correctly. You may need Compaq-supplied custom software.<<]1OSXBADVOL1, bad VOL1 ANSI labelmand9The protection encoded on a magnetic tape volume label is=invalid or the label itself is invalid; the magnetic tape ACP=cannot process the tape. Or, the tape is defective; it is not;an ANSI-labeled tape, or the hardware device is not readingthe tape properly.9Verify the tape volume. If necessary, mount the tape as a"foreign volume and try to read it.==Cg1txBBADVOLACC, invalid value on /LABEL=VOLUME_Accessibility qualifiermand8An invalid ANSI "a" character is specified in the volume-accessibility field of the tape volume label.:Specify a valid ANSI "a" character in the single-character;field of the command. Valid ANSI "a" characters are numbers80 through 9, uppercase letters, space, and the following characters:#! " % & ' ( ) * + ,-. / : ; < = > ?>>f5G1fjx4BADVOLLBL, invalid value for ANSI tape volume labelmand8There are one or more invalid ANSI "a" characters in the volume label.6Respecify the command with a valid ANSI "a" character. ???4Q!1ei3BADDATCHK, invalid keyword on /DATACHECK qualifiermand:The keyword specified for the /DATACHECK qualifier must beeither READ or WRITE. Correct and reenter the command.@@.!1_c-BADDENS, unknown value on /DENSITY qualifiermandINIT encountered at least one error when it attempted to erase the volume..Take action based on the accompanying message.BB 5}1fjP4ILLOPT, qualifier(s) not appropriate to this devicemand>A MOUNT or INITIALIZE command specifies qualifiers that do not;apply to this device type or medium. Certain qualifiers are=applicable only to magnetic tape, or only to disk, or only to,the ISO 9660 or High Sierra file structures.5Enter the HELP command or refer to the HP OpenVMS DCL=Dictionary for a list of qualifiers, then enter the correctedcommand.CCPSMB, Input Symbio"2'1SU!INVUSER, invalid username 'name'nt1The specified user name is syntactically invalid.&Correct the error and reenter the job.DD+$f'1UW#MISSPASS, missing PASSWORD commandnt9A batch job entered from a card reader does not contain a+PASSWORD command following the JOB command.&Correct the error and reenter the job.EEA$p'1UW#INVCONT, invalid line continuationnt>In a batch job entered from a card reader, a continued line is0followed by a line beginning with a dollar sign.&Correct the error and reenter the job.FF [01ac/OPENUAF, error opening user authorization filent>The system cannot open the user authorization file to validate8a batch job entered from a card reader. The accompanying(message provides additional information.See your system manager.GG"/1SU,!JOBCARD, job beginning 'command'ntThe system encountered an error creating a batch job from card reader input.=Take action based on information in the accompanying message,then reenter the job.LLSTALL, Install Uti$,C91]a+NOCMK, operation requires CMKRNL privilegelity7The CMKRNL privilege is needed to perform the requested operation.8Exit INSTALL and enter the command SET/PROC/PRIV=CMKRNL.MM)>k1osE=MISSLNKQUAL, image was not linked with /SECTION_BINDING=CODElity,The image was not linked using the qualifier=/SECTION_BINDING=CODE. Specifying this qualifier ensures that>the linker does not optimize calls between code image sections'by using a relative branch instruction.+Either relink the image using the qualifier>/SECTION_BINDING=CODE or do not install the image as resident.NN/1/1bf0REMOVED, entry for 'file-spec' has been removedlity.The known file entry was removed successfully.None.OO7CH1txBNONRES, installed image non-resident with other specified optionslity7The image has been successfully installed, but not as aresident image.None.PP; ,E/1]a+IMGHDR, error while accessing image headerlity/SECTION_BINDING=DATA or do not install the image as resident.TT~C ^T1<BIMGTRACED, /TRACEBACK image cannot be privileged, execute_only or resident imagelity:An attempt is made to create or replace a known file image>with either the /PRIVILEGE or /EXECUTE_ONLY qualifier, and the.image is linked with the /TRACEBACK qualifier.;Relink the image using the /NOTRACEBACK qualifier and retrythe image installation.UUL;V1lp:NOPAGEDYN, unable to allocate enough paged dynamic memorylity;INSTALL cannot complete the operation because paged dynamicmemory is not accessible.Contact your system manager.VVQOA1rvsc@NODELSHRADR, unable to delete image with shareable address datality=The Install utility cannot delete an image that was installed5with shareable address data. The following images are:automatically installed this way when the SYSGEN parameterA Known File Entry is created by means of the REPLACE command,None. The use of REPLACE implies that an old entry is expectedto exist, but did not exist.ZZd#!1LPsIVQUAL, invalid qualifierlity"An invalid qualifier is specified. Correct and reenter the command.[[k4S-1ei3SYSVERDIF, system version mismatch - please relinklity;The image being installed is not linked against the currentversion of the system.,Relink the image and retry the installation.\\8m 1qs1bfJ0HDRNOTRES, unable to make image header residentlity>Insufficient pool is available to make the header resident, or1the file has an image header larger than 1 block.;Use the SYSGEN parameter PAGEDYN to increase the pool. Only6files with 1-block image headers may be made resident.]]s $1UYx#HELP, enter /HELP for INSTALL helplityThis message is informational.Enter HELP for INSTALL help.^^w 6R/1gk5FAIL, failed to 'execute-verb' entry for 'file-spec'lityM41os=NONSHRADR, image installed ignoring '/SHARE=ADDRESS' 'image'lity>The named image was successfully installed, but without shared address data.9An accompanying message indicates why the image could not:be installed with shared address data. No immediate action9is required. To avoid this message in the future, you can>intentionally install the image without shared address data orthe image SYS$SHARE:SYS$ICBM.EXE is not present on your systemdisk or is not installed.=Check to see whether the image file exists and verify that it>is installed as a known image. (For instructions on installing=a known image, refer to the Install utility chapter in the HP=OpenVMS System Management Utilities Reference Manual.) If youDuring device configuration, OpenVMS was unable to communicate=with one of the devices identified during its scan of the I/Obuses.>Verify that your hardware configuration is set up properly andFrom the console of the storage array, set an allocation class9for the controller that has a positive value of less than1000.b]+x1\\*NODEVID, no identifier defined for device7The device being configured either has been assigned an;invalid device ID or it has an invalid or missing worldwideID.=Assign a valid device ID to the failing device, following the:procedure described in the documentation for the device or=storage array. If you still have a problem, try replacing the=drive. If the error persists, contact HP Customer Support for assistance.bp31dd2MSCIOERR, I/O error while trying to access device>During device configuration, OpenVMS was unable to communicate=with one of the devices identified during its scan of the I/Obuses.>Verify that your hardware configuration is set up properly andThis message is displayed while IO AUTOCONFIGURE scans a fibre8channel bus to locate and configure devices on that bus.None. b21cc1NOICBM, failed to find ICBM with prefix 'prefix':No IOGEN Configuration Building Module (ICBM) can be foundmust also assign an allocation class to the array controllers.;OpenVMS has not obtained a valid allocation class from thisdevice.>From the console of the storage array, set an allocation classfor the array controller.bw(*1YY'CONFIGURED, Configured device 'device')The specified device has been configured.None.bJBC, Job Controller+h1\\K*NOMORECHAR, no more characteristics found8No more characteristics exist that match a wildcard name7specified for the QUI$_DISPLAY_CHARACTERISTICS function5of the $GETQUI system service. At least one match was6found in previous calls during the wildcard search forcharacteristics.7Note the condition and, if necessary, modify the source/program to detect and respond to the condition.b"h1SS[!NOMOREENT, no more entries found;No more job entries exist for the specified user name. This>condition is returned for the QUI$_DISPLAY_ENTRY function of a>call to the $GETQUI system service. It indicates that at least9one entry was found in previous calls during the wildcardsearch for entries.7Note the condition and, if necessary, modify the source/program to detect and respond to the condition.b!h1RRY NOMOREFILE, no more files found>No more files exist for the specified batch or print job. This;condition is returned for the QUI$_DISPLAY_FILE function of:a call to the $GETQUI system service. It indicates that at>least one file was found in previous calls during the wildcardsearch for files.7Note the condition and, if necessary, modify the source/program to detect and respond to the condition.b?v1pp>NOAUTOSTART, node does not have the autostart feature enabledThe event is usually caused by a corrupt queue file, though it.may indicate an internal job controller error.;Enter a STOP/QUEUE/MANAGER command to close the queue file.=If you are running in an OpenVMS Cluster environment, do this:on all nodes. Next, enter a START/QUEUE/MANAGER command on9one node. This will open the queue file and cause the jobspecified for the QUI$_DISPLAY_MANAGER function of the $GETQUI>system service or the DISPLAY_MANAGER function of the F$GETQUI:lexical function. At least one match was found in previous4calls during the wildcard search for queue managers.7Note the condition and, if necessary, modify the source/program to detect and respond to the condition.bq!h1RR NOMOREQUE, no more queues foundDISPLAY_QUEUE function of the $GETQUI system service. At least9one match was found in previous calls during the wildcardsearch for queues.7Note the condition and, if necessary, modify the source/program to detect and respond to the condition.bg/1NNSETIMR, error setting timer=The job controller encountered an error setting a timer for a(job submitted with the /AFTER qualifier..Take action based on the accompanying message.bE1PPNOTASSIGN, queue not assigned:The specified queue cannot be deassigned because it is not assigned.None.b!x1RR/ PRCREAT, error creating process=The job controller encountered an error in creating a process9for a terminal that is attempting to log in. This failure=usually occurs when there are no more process slots available&in the system to create a new process.9Try again later when fewer users are competing for system=resources. Also, notify the system manager of this situation.b:n/1kk9WRIRSPMSG, error writing system service response message7The job controller encountered an error responding to a5$GETQUI, $SNDACC, $SNDJBC, or $SNDSMB system service..Take action based on the accompanying message.b+O/1\\*WRISMBMBX, error writing symbiont mailboxINVBLOCK, internal job controller error; invalid use of block 'number'-A logic error occurred in the job controller.None. b"'A1XX&MISREQPAR, missing required parameter7An item code required for the requested function is notpresent.Specify the required item.!!b(a:1g>BUFTOOSMALL, request could not be completely satisfied due to! limited buffer size>The $GETQUI or $SNDJBC request was not fully satisfied becauseThe parameters of the specified job cannot be modified because>the job is currently executing. Or, the specified queue cannot;be deleted because there is a job executing from the queue.:Reenter the request after the job has completed execution.%%bW:9v1jji8ITMREMOVED, meaningless items were removed from request:One or more item codes or qualifiers are not meaningful in:this command. The command is processed and the meaninglessitems are ignored.The job controller encountered an error assigning a channel to its mailbox..Take action based on the accompanying message.''b? &1WW%GEN_MAX, generic queue limit reached5A maximum of eight generic queues can feed a specific9execution queue. An attempt was made to make an execution,queue the target of too many generic queues.None. This is a restriction.((bR@/(1``<d.NOOPENJOB, no open job for requesting process8The requesting process did not open a job with the SJC$_7CREATE_JOB function prior to making the current $SNDJBC=request, or did not open a job with the SMR$K_CREJOB function,prior to making the current $SNDSMB request.'Modify the program to open a job first.))bA)Dn1ZZ (SYSFAIL, system failed during execution:The system crashed during execution of a batch or symbiontprocess.>Resubmit the batch job or restart the output queues previously.associated with the affected symbiont process.**bGRP1C@REQUEST, service required on queue 'name' for job 'number' user 'name'The system created a new system job queue file. Note, however,:that any jobs currently entered in the old queue file have>been lost. They have not been transferred to the newly created queue file.None.,,b{O|^1/ENOTIMZONRUL, SYS$TIMEZONE_RULE logical not defined, Daylight Savings5 Time clock adjustments are not possible;The system time will not get adjusted when daylight savingsQMGREXISTS, queue manager name is already defined in database4The queue manager name you specified already exists.:Use SHOW QUEUE/MANAGER command or the QUI$_DISPLAY_MANAGER=function of the $GETQUI system service to display informationabout existing queue managers.a unique name with the /NAME_OF_MANAGER qualifier or the SJC$_QUEUE_MANAGER_NAME item code.FFb-&1^^ ,INVITMCOD, invalid item code or option code9The $GETQUI or $SNDJBC item list contains an invalid item7code, or the $SNDSMB or $SNDACC option list contains aninvalid option code.%Correct the item code or option code.GGbI41eeU[3Job 'name' (queue 'name', entry 'number') completed;This message is issued in response to the /NOTIFY qualifier=of the PRINT or SUBMIT command to indicate that the specifiedwith the SET QUEUE, START/QUEUE, or INITIALIZE/QUEUE commands,then retry your request.IIbt21cc1Job 'name' (queue 'name', entry 'number') holding=This message is issued in response to the /IDENTIFY qualifier=of the PRINT or SUBMIT command to indicate that the specified9job has been successfully entered on the queue listed. Byto submit a job has been disabled. You cannot modify or submitjobs to a disabled queue.6This message can also indicate a corrupt queue record.=If you are trying to submit a job, submit it to another queueand notify the system manager.>The system manager should search the operator log file for thefollowing message:9 QMAN-I-QUEDISCOR, queue 'name' has been disabled due to database corruption;This message indicates a corrupt queue record for the named8queue. The system manager should follow the instructions/provided in the documentation for that message.KKb?1pp>Job 'name' (queue 'name', entry 'number') holding until 'time'=This message is issued in response to the /IDENTIFY qualifier=of the PRINT or SUBMIT command to indicate that the specified9job has been successfully entered on the queue listed. ByThis message typically indicates that the system is improperly configured.:Use AUTOGEN to reconfigure the system. If the problem does:not seem to be associated with the system's configuration,>keep a copy of SYS$SYSTEM:JBC$JOB_CONTROL.DMP and any messages;written to the console or operator log file with the QUEUE_8MANAGE or JOB_CONTROL user name, and contact HP CustomerSupport.OOb~<1mm;Job 'name' (queue 'name', entry 'number') started on 'name'=This message is issued in response to the /IDENTIFY qualifier=of the PRINT or SUBMIT command to indicate that the specified9job has been successfully entered on the queue listed. Byreenter your original command when the queue is in the stoppedstate.QQb(c 1YY'JOBABORT, job aborted during execution=The execution of the affected job is aborted by a STOP/ABORT,$STOP/ENTRY, or DELETE/ENTRY command.If necessary, resubmit the job.RRbP8W1ii b7QUENOTSTOP, queue must be stopped to perform operation=A queue management operation that requires the queue to be in=a stopped state (for example, deleting a queue) was attempted%while the queue was in another state.8Enter a STOP/QUEUE/RESET command to stop the queue, thenreenter the original request.SSb`<1mmlr;JOBCTLABORT, request failed because job controller aborted8The $GETQUI, $SNDACC, $SNDJBC, or $SNDSMB system service>operation failed because the job controller process terminated=execution. The job controller voluntarily aborts and restarts;itself if it encounters a fatal system error or an internal logic error.None.TTb@S1qq?QUERESET, job aborted during execution because queue was reset=The queue is reset with a STOP/RESET command during executionof the affected job.Resubmit the job.UUb)[ 1ZZ(JOBDELETE, job deleted before execution>The affected job was deleted by a DELETE/ENTRY or DELETE/QUEUEcommand before it executed.If necessary, resubmit the job.HP Customer Support.ithin the image rather than to a debug4section where the modification is supposed to occur.5Have your system manager contact HP Customer Support.*#JBC, Job Controller,b'1]]+JOBNOTEXEC, specified job is not executingjob queue manager has not been started. This error is returned>on queue operations before the START/QUEUE/MANAGER command hasbeen executed.Consult the system manager.81ii17JOBQUEENA, system job queue manager is already runningSTOP/QUEUE/MANAGER command. Otherwise, no action is necessary.#R1TT"NORESTART, job is not restartable>The specified job cannot be requeued because it is not definedto be restartable.None.<x1mm;JOBREQUEUE, job aborted during execution and then requeued>The execution of the affected job is aborted by a STOP/REQUEUE8command. The job is requeued and will be executed again.None. ;1QQSTARTED, queue already started:The queue cannot be started because it is already running.None.;h]1ll1:AUTONOTSTART, queue is auto start active, but not startedThe job controller received an invalid message. This indicates>a logic error in the system or in the job controller interfaceof a user-written symbiont."Identify the cause of the problem. 8#E1TTJ"INVMSGBUF, invalid message buffer>The $SNDSMB or $SNDACC message buffer is invalid because it isCorrect the message buffer format and retry the system servicecall. fB~1ssxASTKNOTCHANGE, the stock associated with a form cannot be changed;A DEFINE/FORM command for an existing form specified /STOCK=with a new stock value while references to the form are still outstanding.3Use the SHOW QUEUE/FULL command to display existing9references. Remove any outstanding references and reenterthe DEFINE/FORM/STOCK request.>If the SHOW QUEUE/FULL display does not include the reference,or a $SNDACC or $SNDSMB option, is outside the valid range for that item.8Specify a valid value and retry the system service call.1KKNOJOBCTX, no job contexteither the QUI$_DISPLAY_JOB or the QUI$_DISPLAY_ENTRY functioncodes.a1ESTRUCT_LEVEL, system job queue file has incompatible structure level of 'number';After opening the system job queue file, the job controller8determined that the internal format of the queue file or5revision level is different from the format currently;supported by the system. This situation usually occurs when;an old queue file is used after installing a new release of=the OpenVMS operating system or after a maintenance update in(which the queue file format has changed.:Create a new queue file using the START/QUEUE/MANAGER/NEW_>REVISION command, or delete the existing queue file and create1a new file using the START/QUEUE/MANAGER command.$1UU#NOSUCHCHAR, no such characteristic:The specified characteristic does not exist. In a wildcard7$GETQUI operation, no more characteristics matching thespecified selector exist.None.y(1YYo'INVQMANNAM, invalid queue manager namejob queue file. Note, however, that any jobs currently entered8in the old queue file have been lost; they have not been,transferred to the newly created queue file.None.A1KKNOSUCHENT, no such entry9The specified job entry in the system queue file does notexist.None.'A\k1rr9@TOOMUCHINFO, size of data in request exceeds system constraints:The amount of data specified for a record within the queue manager's database is too large.>Contact HP Customer Support to notify OpenVMS Engineering that+current constraints do not meet your needs.y1KKNOSUCHFILE, no such file8The specified file does not exist. In a wildcard $GETQUI8operation, no more files matching the specified selectorexist.None.y1KKNOSUCHFORM, no such form8The specified form does not exist. In a wildcard $GETQUI8operation, no more forms matching the specified selectorexist.None.1=/1bb0REAJBCMBX, error reading job controller mailboxon another node to perform the requested operation. The remote=job controller cannot be reached because an invalid node name;was specified, the remote node is not reachable, or the job-controller on the remote node is not running.=Check the node name specified and verify that the remote node;is currently in the OpenVMS Cluster environment, then retrythe operation.#1TT"NOSUCHQMGR, no such queue manager9The specified queue manager does not exist. In a wildcard>$GETQUI or F$GETQUI operation, no more queue managers matchingthe specified selector exist.None. {1KKNOSUCHQUE, no such queue9The specified queue does not exist. In a wildcard $GETQUI9operation, no more queues matching the specified selectorexist.None.!!>z/1oo=SYMCREPRC, error creating symbiont process for 'device-name'9The job controller encountered an error creating an input7symbiont process for card reader input on the specifieddevice..Take action based on the accompanying message.""/1W1bbA0SYMDEL, unexpected symbiont process termination;A symbiont process exited without being requested to do so.9This message can result from an unplanned node or OpenVMSCluster shutdown.=Take action based on the accompanying message. A process dumpmight have been created.ting system service response message7The job controller encountered an error responding to a5$GETQUI, $SNDACC, $SNDJBC, or $SNDSMB system service..Take action based on the accompanying message.b+O/1\\*WRISMBMBX, error writing symbiont mailboxINVBLOCK, internal job controller error; invalid use of block 'number'-A logic error occurred in the job controller.None. b"'A1XX&MISREQPAR, missing required parameter7An item code required for the requested function is notpresent.Specify the required item.!!b(a:1g>BUFTOOSMALL, request could not be completely satisfied due to! limited buffer size>The $GETQUI or $SNDJBC request was not fully satisfied becauseThe parameters of the specified job cannot be modified because>the job is currently executing. Or, the specified queue cannot;be deleted because there is a job executing from the queue.:Reenter the request after the job has completed execution.%%bW:9v1jji8ITMREMOVED, meaningless items were removed from request:One or more item codes or qualifiers are not meaningful in:this command. The command is processed and the meaninglessitems are ignored.The job controller encountered an error assigning a channel to its mailbox..Take action based on the accompanying message.''b? &1WW%GEN_MAX, generic queue limit reached5A maximum of eight generic queues can feed a specific9execution queue. An attempt was made to make an execution,queue the target of too many generic queues.None. This is a restriction.((bR@/(1``<d.NOOPENJOB, no open job for requesting process8The requesting process did not open a job with the SJC$_7CREATE_JOB function prior to making the current $SNDJBC=request, or did not open a job with the SMR$K_CREJOB function,prior to making the current $SNDSMB request.'Modify the program to open a job first.))bA)Dn1ZZ (SYSFAIL, system failed during execution:The system crashed during execution of a batch or symbiontprocess.>Resubmit the batch job or restart the output queues previously.associated with the affected symbiont process.**bGRP1C@REQUEST, service required on queue 'name' for job 'number' user 'name'The system created a new system job queue file. Note, however,:that any jobs currently entered in the old queue file have>been lost. They have not been transferred to the newly created queue file.None.,,b{O|^1/ENOTIMZONRUL, SYS$TIMEZONE_RULE logical not defined, Daylight Savings5 Time clock adjustments are not possible;The system time will not get adjusted when daylight savingsQMGREXISTS, queue manager name is already defined in database4The queue manager name you specified already exists.:Use SHOW QUEUE/MANAGER command or the QUI$_DISPLAY_MANAGER=function of the $GETQUI system service to display informationabout existing queue managers.a unique name with the /NAME_OF_MANAGER qualifier or the SJC$_QUEUE_MANAGER_NAME item code.FFb-&1^^ ,INVITMCOD, invalid item code or option code9The $GETQUI or $SNDJBC item list contains an invalid item7code, or the $SNDSMB or $SNDACC option list contains aninvalid option code.%Correct the item code or option code.GGbI41eeU[3Job 'name' (queue 'name', entry 'number') completed;This message is issued in response to the /NOTIFY qualifier=of the PRINT or SUBMIT command to indicate that the specifiedwith the SET QUEUE, START/QUEUE, or INITIALIZE/QUEUE commands,then retry your request.IIbt21cc1Job 'name' (queue 'name', entry 'number') holding=This message is issued in response to the /IDENTIFY qualifier=of the PRINT or SUBMIT command to indicate that the specified9job has been successfully entered on the queue listed. Byto submit a job has been disabled. You cannot modify or submitjobs to a disabled queue.6This message can also indicate a corrupt queue record.=If you are trying to submit a job, submit it to another queueand notify the system manager.>The system manager should search the operator log file for thefollowing message:9 QMAN-I-QUEDISCOR, queue 'name' has been disabled due to database corruption;This message indicates a corrupt queue record for the named8queue. The system manager should follow the instructions/provided in the documentation for that message.KKb?1pp>Job 'name' (queue 'name', entry 'number') holding until 'time'=This message is issued in response to the /IDENTIFY qualifier=of the PRINT or SUBMIT command to indicate that the specified9job has been successfully entered on the queue listed. ByThis message typically indicates that the system is improperly configured.:Use AUTOGEN to reconfigure the system. If the problem does:not seem to be associated with the system's configuration,>keep a copy of SYS$SYSTEM:JBC$JOB_CONTROL.DMP and any messages;written to the console or operator log file with the QUEUE_8MANAGE or JOB_CONTROL user name, and contact HP CustomerSupport.OOb~<1mm;Job 'name' (queue 'name', entry 'number') started on 'name'=This message is issued in response to the /IDENTIFY qualifier=of the PRINT or SUBMIT command to indicate that the specified9job has been successfully entered on the queue listed. Byreenter your original command when the queue is in the stoppedstate.QQb(c 1YY'JOBABORT, job aborted during execution=The execution of the affected job is aborted by a STOP/ABORT,$STOP/ENTRY, or DELETE/ENTRY command.If necessary, resubmit the job.RRbP8W1ii b7QUENOTSTOP, queue must be stopped to perform operation=A queue management operation that requires the queue to be in=a stopped state (for example, deleting a queue) was attempted%while the queue was in another state.8Enter a STOP/QUEUE/RESET command to stop the queue, thenreenter the original request.SSb`<1mmlr;JOBCTLABORT, request failed because job controller aborted8The $GETQUI, $SNDACC, $SNDJBC, or $SNDSMB system service>operation failed because the job controller process terminated=execution. The job controller voluntarily aborts and restarts;itself if it encounters a fatal system error or an internal logic error.None.TTb@S1qq?QUERESET, job aborted during execution because queue was reset=The queue is reset with a STOP/RESET command during executionof the affected job.Resubmit the job.UUb)[ 1ZZ(JOBDELETE, job deleted before execution>The affected job was deleted by a DELETE/ENTRY or DELETE/QUEUEcommand before it executed.If necessary, resubmit the job.HP Customer Support.ithin the image rather than to a debug4section where the modification is supposed to occur.5Have your system manager contact HP Customer Support.|| LADCP, LAD Control Pe0"T81ao/NODISKCLIENT, disk client driver not availablerogram Utilitycondition occurred that caused the connection to be abnormally terminated.>Determine the availability of the node that had the connectionbroken.~ `1PPSESLIM, session limit reached7A LAT connection attempt failed because the current LAT'session limit has already been reached.8Use the LATCP command SET NODE/SESSION_LIMIT=OUTGOING to9increase the session limit, or wait for a session slot to;become available. Refer to the HP OpenVMS System Management0Utilities Reference Manual for more information.  0Z:1aa/CONNDELETEONLY, connection can only be deleted:You tried to change a virtual circuit characteristic. Thisinformation cannot be changed.9Do not attempt to change virtual circuit characteristics. /K/1``.BADGETJPI, unable to read process information;LATCP was unable to read process information before doing aSPAWN command..Take action based on the accompanying message.  &1WW%CONNECTED, session to 'service-name'>The SET HOST/LAT session has been established to the specified:service and node. No node name is specified in the message)when the node is the same as the service.None. *H1[[)NOMORESVCS, no more services in database>A wildcard search of services in the database reached the lastservice.None.  6]1gg:5CONNECTQUEUED, queued at service position 'position'>A LAT connection request issued to a service with no available6resources has been placed in the remote node's service6connection queue. When resources become available, the%connection request will be completed.;Wait until the connection request is serviced. To abort the queued connection, press Ctrl/Y..>/1__-REINITERR, error attempting reinitialization=LATCP cannot reinitialize in order to accept another command..Take action based on the accompanying message.%H1VV$LOSTMSG, broadcast message was lost>LATCP encountered an error while trying to display a broadcastmessage.None.,N.1]]+NOTATERM, command device is not a terminal=An attempt was made to use SET HOST/LAT from a device that isnot a terminal.-Use SET HOST/LAT from a terminal device only.! i13ECONTIMEOUT, connection timed out, server not available, or incorrect" server name specified>A LAT connection attempt on a LAT device (LTAxxx:) failed whennot available, or the LTA device describing the destination to.receive the connection was set up incorrectly.>Check the mapping for the LTA device from which the connection6was attempted, or check to see whether the remote node8described by the LTA device is available on the network.,.}1]]+UNDEFENTRY, invalid queue entry request ID-The queue entry you specified does not exist.=Use the LATCP SHOW QUEUE_ENTRY command to list all entries in>the local queue. Retry the command, using a valid queue entry.) 3tc1dd;2ERRVIRDPY, unable to create virtual output deviceCheck group codes of the local node against group codes of the object node. ,61]]+CONTROLC, operation completed under CTRL/C5The LATCP command completed after you pressed Ctrl/C.None. /L1``.LRJACCESSREJECT, immediate access is rejected=The connection cannot be established because immediate access was rejected.Retry the connection later.!MG1PPLRJCORRUPT, corrupted request;The connection cannot be established because of a corruptednetwork message.=Retry the connection. Contact the network manager if problemspersist."+y1\\*LRJDELETED, queue entry deleted by server;The connection cannot be established because the connectionLRJNOTQUEUED, entry is not in the queue or server queue limit reachedThe connection cannot be established because a system shutdown"of the object node is in progress.None.))v0<1FFLRJUNKNOWN, unknown;The connection cannot be established for an unknown reason.None.**1'<1XX&LRJUSERDIS, user requested disconnect;The session was normally disconnected from the object node.None.++2(O1YY'LRJUSERDISC, user requested disconnect=The remote user of the LAT session requested that the sessionbe disconnected.None.,,8(/1JJrINVCMD, invalid command'The specified LATCP command is invalid..Take action based on the accompanying message.--x?$/1UU#MODLINK, modified link 'link-name'.The specified link has been modified by LATCP.None...B3?1dd2MODNODE, modified characteristic(s) of local node7Characteristics of the local node have been modified byLATCP.None.//CD1uuCNODECNTRSONLY, only counter information is available for this node8The specified node offers no services known to the local>node. However, there is a connection from the node and counterinformation is maintained.None.00eGx1OOwINVNODEUID, invalid node UID>A LAT connection was attempted, but the remote node returned a8unique node identifier that was different than expected.6Retry the connection. If this error persists, look for;multiple nodes on the network having the same LAT node nameSystem Management Utilities Reference Manual for instructions)and retry the connection.77Q."/1__-CANTCOPYSTR, unable to copy character string!An internal LATCP error occurred..Take action based on the accompanying message.88cU%o1VVu$NODESHUT, node shutdown in progress>g-v;1^^,UNREACHABLE, node 'node-name' not reachable8A LAT connection attempt to a specified node and serviceD>1oo=NOTLOADED, LAT terminal port driver (LTDRIVER) is not loaded;An attempt was made to execute LATACP when LTDRIVER was notloaded.=Check to see whether the LAT software is properly configured.BBj091aa/ZEROPORT, zeroed counters for port 'port-name'8Port counters for the specified device have been zeroed.None.CCk991jj8ZEROSERVICE, zeroed counters for service 'service-name'8LATCP reset the counters for the specified service to 0.None.DDm3wS1dd.2NODUNAV, node 'node-name' not currently reachable8A LAT connection attempt to a specified service and node=failed because the specified node is not currently reachable.=Retry the connection, or determine why the remote node is notcurrently reachable.EEz,r1]]+NORATINGIMAGE, LAT rating image not loaded>An attempt was made to start the LAT ancillary control process2(LATACP), but the LAT$RATING image was not loaded.9Be sure to start LAT by executing the LAT$STARTUP command9procedure to access the support startup files supplied by8Compaq. The LAT$STARTUP command procedure executes other9command procedures, including LAT$CONFIG, which loads theLAT$RATING image.FF} 1PPFAILOVER, attempting failover:A SET HOST/LAT connection to a service has been abnormally;lost. SET/HOST LAT is attempting to connect to another nodeoffering the same service.None.GG3I1dd/2NOTOFFERED, service not offered by requested node5A LAT connection attempt to a specified service for a9specified node failed because the node does not offer theselected service.7Retry the connection and specify a node that offers thedesired service.HHz]1PP'CIBLIM, circuit limit reached9A LAT connect request to a remote node failed because the6remote node has no resources to accept another virtualcircuit.>Wait until the remote node disconnects another virtual circuitbefore attempting to connect.II)BwQ1ss;ASRVCNODE, service 'service-name' not offered by node 'node-name'8A LAT connection attempt to a specified service and node=failed because the node does not offer the specified service.;Retry the connection request and specify a node that offersthe desired service.JJ++Q1\\=*SRVDIS, outgoing connections are disabled6An outbound LAT connection was attempted when outboundconnections are disabled.=Enable connections using the LATCP command SET NODE. Refer to;the HP OpenVMS System Management Utilities Reference Manualfor more information.KK4j+1ee3QUALOBS, qualifier obsolete - '/qualifier' ignoredLAT$RATING image. If you make changes to the LAT$RATING image,=be sure that the initialization entry points are still called$by LTDRIVER when LTDRIVER is loaded.RRu #-1TT"DEFINEKEY, defined key 'key-name',The specified key has been defined by LATCP.None.SS$S1UU#NAMETOOLONG, link name is too long>An attempt was made to create or set a link with a name longerthan 16 characters.Shorten the link name.TT5`G1ff 4NOSELF, connecting to the local node is not allowed:A LAT connection attempt to a service offered by the local$node was targeted to the local node.=Retry the connection and specify another node that offers theservice.UU.B/1__-CMDERROR, error reported by command executor8The command executor module for LATCP cannot execute thecommand..Take action based on the accompanying message.VVs $*1UU#DELENTRY, deleted queue entry 'id')The specified queue entry ID was deleted.None.WW'h/1XX&NOIDBAVAIL, unable to allocate an IDB;LATCP cannot allocate enough virtual memory for an internal+data structure needed to execute a command..Take action based on the accompanying message.XX7L'1hh6TODISCON, type ^'character' to disconnect the session5Use the specified control character to disconnect theSET HOST/LAT session.&Enter the specified control character.YY$A!1UU#CMDOBS, command obsolete - ignored7The specified LATCP command is obsolete; the command isignored. Discontinue use of this command.ZZ .31__-DELETEDCONN, deleted connection 'connect-id'2A delete circuit operation completed successfully.None.[[ +1\\*END, control returned to node 'node-name'>A remote terminal session has ended. If DECnet for OpenVMS has>not been started on your system, _0:: is displayed in place ofyour node name.None.\\*Z1[[)NOSRVC, service 'service-name' not known>A LAT connection was attempted for a specified service that isunknown to the local node.if there is something wrong with a node offering the specified>service. Possibly the service group codes on the local node do=not intersect with the group codes for the specified service.]]AE.1rr@CNTRSOBS, counters command qualifier obsolete - command ignored;The LATCP command SHOW COUNTERS is obsolete; the command isignored.-Discontinue use of the SHOW COUNTERS command.^^B]/1ssANOITMLST, unable to allocate virtual memory for command itemlist:LATCP cannot allocate enough virtual memory for a LAT item!list needed to execute a command..Take action based on the accompanying message.__ \9X1ENOTWITHCONN, parameter cannot be modified with connections active or pending8An attempt to modify a LAT parameter failed because that;parameter cannot be modified while active connections exist7or while a connection request is pending. For a list ofWait until there are no outstanding connection requests beforemodifying the parameter.``v #.1TT"DELLINK, deleted link 'link-name'-The specified link has been deleted by LATCP.None.aav #.1TT"DELPORT, deleted port 'port-name'-The specified port has been deleted by LATCP.None.bb 6BM1gg5INSRES, insufficient resources to complete operation8The system does not have enough resources to service therequest.=Contact the system manager to determine which system resourceis inadequate.cc ,11]]+DELSERVICE, deleted service 'service-name'0The specified service has been deleted by LATCP.None.dd"?61SS!VCLIM, LAT circuit limit reached5The maximum number of allowable LAT circuits has beenreached.5Retry the operation when a circuit becomes available.eeV1k1bbh0VCSESLIM, session limit for LAT circuit reached>A LAT connection attempt failed because the connection between7the local node and the destination node already has the#maximum number of sessions allowed.6Attempt a connection to another node offering the same3service, or wait until a session becomes available.ff%w21VV$NOLANDEV, no LAN devices configured=No LAN controllers were found on the system. At least one LAN8controller must be present in order for LAT to function.1Install hardware for at least one LAN controller.ggx',1XX&LATSTOPPING, LAT shutdown in progress+The LAT software stopped on the local node.None.hhv#.1TT"NEWLINK, created link 'link-name'-The specified link has been created by LATCP.None.iiUM1ANEWLOGNAME, created logical name 'logical-name' in table 'table- name';The specified logical name has been created by LATCP in thespecified table.None.jjv#.1TT"NEWPORT, created port 'port-name'-The specified port has been created by LATCP.None.kk,11]]+NEWSERVICE, created service 'service-name'0The specified service has been created by LATCP.None.lly *L1[[)ENTNOTFOU, node/service entity not found:The local node cannot locate information about a specifiednode or service.9Check the network to ascertain that the specified node or9nodes offering the specified service are available. Also,;check that the group codes offered by the specified node or3service coincide with the local node's user groups.mm% /51``7.ENTRYDELONLY, queue entry can only be deleted>An attempt was made to use a SETMODE $QIO operation on a queue;entry. You can only delete queue entries from the system or&use SENSEMODE $QIO operations on them.4Do not use SETMODE $QIO operations on queue entries.nnIFmw1ww[ECONAPPLICATION, connection request is not to a LAT applications port>A LATSYM print queue was set up, but the LTA device controlled-by the queue is not a LAT application device.6Use the LAT control program to modify the LTA device's7characteristics so that the device is a LAT applicationdevice.oo <"1mm;CONATMPT, continuing attempts to connect to 'service-name'6A SET HOST/LAT connection failed and is being retried.:This message is seen only if the /AUTOCONNECT qualifier isspecified on SET HOST/LAT.!Press Ctrl/Y to cancel the retry.pp(i1YY'NOSUCHNODE, node 'node-name' not known8A LAT connection attempt to a specified service and node/failed because the target node name is unknown.:Retry the connection until the specified node is known, orhas been rejected because LATACP has insufficient resources toservice the request.=Refer to the HP OpenVMS System Management Utilities Reference7Manual for information about how to set a node limit to>decrease LATACP's consumption of P0 space, or how to determine>the cause of the resource exhaustion and attempt to correct itby tuning the LATACP process.zzVC, Local Area Ope" k1S_!WORKING, 'customer-defined text'nVMS Cluster7The local area OpenVMS Cluster network failure analysis2determined that this network component is working.=If the network component is indeed working, no user action isnetwork description does not accurately represent the physicalThe affected job was deleted by a DELETE/ENTRY or DELETE/QUEUEcommand before it executed.If necessary, resubmit the job.HP Customer Support.ithin the image rather than to a debug4section where the modification is supposed to occur.5Have your system manager contact HP Customer Support. ^  LAVC, Local Area Ope# FL1T`"ASUSPECT, 'customer-defined-text'nVMS Cluster7The local area OpenVMS Cluster network failure analysis=located a network problem and reported this network component:as suspect. Several PEDRIVER channels that were using this:network component have failed. The analysis indicates that=this component or something connected to it is likely to havecaused the network problem.:Ask the system manager or network manager to look into thenetwork problem.RIVER.EXET, LAT Facility)71ZZ(NOMOREENTRIES, no more entries in queue6There are no more entries in the LAT connection queue.None.^9q1jjp8SERUNAV, service 'service-name' not currently availablecondition occurred that caused the connection to be abnormally terminated.>Determine the availability of the node that had the connectionbroken.~ `1PPSESLIM, session limit reached7A LAT connection attempt failed because the current LAT'session limit has already been reached.8Use the LATCP command SET NODE/SESSION_LIMIT=OUTGOING to9increase the session limit, or wait for a session slot to;become available. Refer to the HP OpenVMS System Management0Utilities Reference Manual for more information.  0Z:1aa/CONNDELETEONLY, connection can only be deleted:You tried to change a virtual circuit characteristic. Thisinformation cannot be changed.9Do not attempt to change virtual circuit characteristics. /K/1``.BADGETJPI, unable to read process information;LATCP was unable to read process information before doing aSPAWN command..Take action based on the accompanying message.  &1WW%CONNECTED, session to 'service-name'>The SET HOST/LAT session has been established to the specified:service and node. No node name is specified in the message)when the node is the same as the service.None. *H1[[)NOMORESVCS, no more services in database>A wildcard search of services in the database reached the lastservice.None.  6]1gg:5CONNECTQUEUED, queued at service position 'position'>A LAT connection request issued to a service with no available6resources has been placed in the remote node's service6connection queue. When resources become available, the%connection request will be completed.;Wait until the connection request is serviced. To abort the queued connection, press Ctrl/Y..>/1__-REINITERR, error attempting reinitialization=LATCP cannot reinitialize in order to accept another command..Take action based on the accompanying message.%H1VV$LOSTMSG, broadcast message was lost>LATCP encountered an error while trying to display a broadcastmessage.None.,N.1]]+NOTATERM, command device is not a terminal=An attempt was made to use SET HOST/LAT from a device that isnot a terminal.-Use SET HOST/LAT from a terminal device only.! i13ECONTIMEOUT, connection timed out, server not available, or incorrect" server name specified>A LAT connection attempt on a LAT device (LTAxxx:) failed whennot available, or the LTA device describing the destination to.receive the connection was set up incorrectly.>Check the mapping for the LTA device from which the connection6was attempted, or check to see whether the remote node8described by the LTA device is available on the network.,.}1]]+UNDEFENTRY, invalid queue entry request ID-The queue entry you specified does not exist.=Use the LATCP SHOW QUEUE_ENTRY command to list all entries in>the local queue. Retry the command, using a valid queue entry.) 3tc1dd;2ERRVIRDPY, unable to create virtual output deviceCheck group codes of the local node against group codes of the object node. ,61]]+CONTROLC, operation completed under CTRL/C5The LATCP command completed after you pressed Ctrl/C.None. /L1``.LRJACCESSREJECT, immediate access is rejected=The connection cannot be established because immediate access was rejected.Retry the connection later.!MG1PPLRJCORRUPT, corrupted request;The connection cannot be established because of a corruptednetwork message.=Retry the connection. Contact the network manager if problemspersist."+y1\\*LRJDELETED, queue entry deleted by server;The connection cannot be established because the connectionLRJNOTQUEUED, entry is not in the queue or server queue limit reachedThe connection cannot be established because a system shutdown"of the object node is in progress.None.))v0<1FFLRJUNKNOWN, unknown;The connection cannot be established for an unknown reason.None.**1'<1XX&LRJUSERDIS, user requested disconnect;The session was normally disconnected from the object node.None.++2(O1YY'LRJUSERDISC, user requested disconnect=The remote user of the LAT session requested that the sessionbe disconnected.None.,,8(/1JJrINVCMD, invalid command'The specified LATCP command is invalid..Take action based on the accompanying message.--x?$/1UU#MODLINK, modified link 'link-name'.The specified link has been modified by LATCP.None...B3?1dd2MODNODE, modified characteristic(s) of local node7Characteristics of the local node have been modified byLATCP.None.//CD1uuCNODECNTRSONLY, only counter information is available for this node8The specified node offers no services known to the local>node. However, there is a connection from the node and counterinformation is maintained.None.00eGx1OOwINVNODEUID, invalid node UID>A LAT connection was attempted, but the remote node returned a8unique node identifier that was different than expected.6Retry the connection. If this error persists, look for;multiple nodes on the network having the same LAT node nameSystem Management Utilities Reference Manual for instructions)and retry the connection.77Q."/1__-CANTCOPYSTR, unable to copy character string!An internal LATCP error occurred..Take action based on the accompanying message.88cU%o1VVu$NODESHUT, node shutdown in progress>g-v;1^^,UNREACHABLE, node 'node-name' not reachable8A LAT connection attempt to a specified node and serviceD>1oo=NOTLOADED, LAT terminal port driver (LTDRIVER) is not loaded;An attempt was made to execute LATACP when LTDRIVER was notloaded.=Check to see whether the LAT software is properly configured.BBj091aa/ZEROPORT, zeroed counters for port 'port-name'8Port counters for the specified device have been zeroed.None.CCk991jj8ZEROSERVICE, zeroed counters for service 'service-name'8LATCP reset the counters for the specified service to 0.None.DDm3wS1dd.2NODUNAV, node 'node-name' not currently reachable8A LAT connection attempt to a specified service and node=failed because the specified node is not currently reachable.=Retry the connection, or determine why the remote node is notcurrently reachable.EEz,r1]]+NORATINGIMAGE, LAT rating image not loaded>An attempt was made to start the LAT ancillary control process2(LATACP), but the LAT$RATING image was not loaded.9Be sure to start LAT by executing the LAT$STARTUP command9procedure to access the support startup files supplied by8Compaq. The LAT$STARTUP command procedure executes other9command procedures, including LAT$CONFIG, which loads theLAT$RATING image.FF} 1PPFAILOVER, attempting failover:A SET HOST/LAT connection to a service has been abnormally;lost. SET/HOST LAT is attempting to connect to another nodeoffering the same service.None.GG3I1dd/2NOTOFFERED, service not offered by requested node5A LAT connection attempt to a specified service for a9specified node failed because the node does not offer theselected service.7Retry the connection and specify a node that offers thedesired service.HHz]1PP'CIBLIM, circuit limit reached9A LAT connect request to a remote node failed because the6remote node has no resources to accept another virtualcircuit.>Wait until the remote node disconnects another virtual circuitbefore attempting to connect.II)BwQ1ss;ASRVCNODE, service 'service-name' not offered by node 'node-name'8A LAT connection attempt to a specified service and node=failed because the node does not offer the specified service.;Retry the connection request and specify a node that offersthe desired service.JJ++Q1\\=*SRVDIS, outgoing connections are disabled6An outbound LAT connection was attempted when outboundconnections are disabled.=Enable connections using the LATCP command SET NODE. Refer to;the HP OpenVMS System Management Utilities Reference Manualfor more information.KK4j+1ee3QUALOBS, qualifier obsolete - '/qualifier' ignoredLAT$RATING image. If you make changes to the LAT$RATING image,=be sure that the initialization entry points are still called$by LTDRIVER when LTDRIVER is loaded.RRu #-1TT"DEFINEKEY, defined key 'key-name',The specified key has been defined by LATCP.None.SS$S1UU#NAMETOOLONG, link name is too long>An attempt was made to create or set a link with a name longerthan 16 characters.Shorten the link name.TT5`G1ff 4NOSELF, connecting to the local node is not allowed:A LAT connection attempt to a service offered by the local$node was targeted to the local node.=Retry the connection and specify another node that offers theservice.UU.B/1__-CMDERROR, error reported by command executor8The command executor module for LATCP cannot execute thecommand..Take action based on the accompanying message.VVs $*1UU#DELENTRY, deleted queue entry 'id')The specified queue entry ID was deleted.None.WW'h/1XX&NOIDBAVAIL, unable to allocate an IDB;LATCP cannot allocate enough virtual memory for an internal+data structure needed to execute a command..Take action based on the accompanying message.XX7L'1hh6TODISCON, type ^'character' to disconnect the session5Use the specified control character to disconnect theSET HOST/LAT session.&Enter the specified control character.YY$A!1UU#CMDOBS, command obsolete - ignored7The specified LATCP command is obsolete; the command isignored. Discontinue use of this command.ZZ .31__-DELETEDCONN, deleted connection 'connect-id'2A delete circuit operation completed successfully.None.[[ +1\\*END, control returned to node 'node-name'>A remote terminal session has ended. If DECnet for OpenVMS has>not been started on your system, _0:: is displayed in place ofyour node name.None.\\*Z1[[)NOSRVC, service 'service-name' not known>A LAT connection was attempted for a specified service that isunknown to the local node.if there is something wrong with a node offering the specified>service. Possibly the service group codes on the local node do=not intersect with the group codes for the specified service.]]AE.1rr@CNTRSOBS, counters command qualifier obsolete - command ignored;The LATCP command SHOW COUNTERS is obsolete; the command isignored.-Discontinue use of the SHOW COUNTERS command.^^B]/1ssANOITMLST, unable to allocate virtual memory for command itemlist:LATCP cannot allocate enough virtual memory for a LAT item!list needed to execute a command..Take action based on the accompanying message.__ \9X1ENOTWITHCONN, parameter cannot be modified with connections active or pending8An attempt to modify a LAT parameter failed because that;parameter cannot be modified while active connections exist7or while a connection request is pending. For a list ofWait until there are no outstanding connection requests beforemodifying the parameter.``v #.1TT"DELLINK, deleted link 'link-name'-The specified link has been deleted by LATCP.None.aav #.1TT"DELPORT, deleted port 'port-name'-The specified port has been deleted by LATCP.None.bb 6BM1gg5INSRES, insufficient resources to complete operation8The system does not have enough resources to service therequest.=Contact the system manager to determine which system resourceis inadequate.cc ,11]]+DELSERVICE, deleted service 'service-name'0The specified service has been deleted by LATCP.None.dd"?61SS!VCLIM, LAT circuit limit reached5The maximum number of allowable LAT circuits has beenreached.5Retry the operation when a circuit becomes available.eeV1k1bbh0VCSESLIM, session limit for LAT circuit reached>A LAT connection attempt failed because the connection between7the local node and the destination node already has the#maximum number of sessions allowed.6Attempt a connection to another node offering the same3service, or wait until a session becomes available.ff%w21VV$NOLANDEV, no LAN devices configured=No LAN controllers were found on the system. At least one LAN8controller must be present in order for LAT to function.1Install hardware for at least one LAN controller.ggx',1XX&LATSTOPPING, LAT shutdown in progress+The LAT software stopped on the local node.None.hhv#.1TT"NEWLINK, created link 'link-name'-The specified link has been created by LATCP.None.iiUM1ANEWLOGNAME, created logical name 'logical-name' in table 'table- name';The specified logical name has been created by LATCP in thespecified table.None.jjv#.1TT"NEWPORT, created port 'port-name'-The specified port has been created by LATCP.None.kk,11]]+NEWSERVICE, created service 'service-name'0The specified service has been created by LATCP.None.lly *L1[[)ENTNOTFOU, node/service entity not found:The local node cannot locate information about a specifiednode or service.9Check the network to ascertain that the specified node or9nodes offering the specified service are available. Also,;check that the group codes offered by the specified node or3service coincide with the local node's user groups.mm% /51``7.ENTRYDELONLY, queue entry can only be deleted>An attempt was made to use a SETMODE $QIO operation on a queue;entry. You can only delete queue entries from the system or&use SENSEMODE $QIO operations on them.4Do not use SETMODE $QIO operations on queue entries.nnIFmw1ww[ECONAPPLICATION, connection request is not to a LAT applications port>A LATSYM print queue was set up, but the LTA device controlled-by the queue is not a LAT application device.6Use the LAT control program to modify the LTA device's7characteristics so that the device is a LAT applicationdevice.oo <"1mm;CONATMPT, continuing attempts to connect to 'service-name'6A SET HOST/LAT connection failed and is being retried.:This message is seen only if the /AUTOCONNECT qualifier isspecified on SET HOST/LAT.!Press Ctrl/Y to cancel the retry.pp(i1YY'NOSUCHNODE, node 'node-name' not known8A LAT connection attempt to a specified service and node/failed because the target node name is unknown.:Retry the connection until the specified node is known, orhas been rejected because LATACP has insufficient resources toservice the request.=Refer to the HP OpenVMS System Management Utilities Reference7Manual for information about how to set a node limit to>decrease LATACP's consumption of P0 space, or how to determine>the cause of the resource exhaustion and attempt to correct itby tuning the LATACP process.zzVC, Local Area Ope" k1S_!WORKING, 'customer-defined text'nVMS Cluster7The local area OpenVMS Cluster network failure analysis2determined that this network component is working.=If the network component is indeed working, no user action isnetwork description does not accurately represent the physicalThe affected job was deleted by a DELETE/ENTRY or DELETE/QUEUEcommand before it executed.If necessary, resubmit the job.HP Customer Support.ithin the image rather than to a debug4section where the modification is supposed to occur.5Have your system manager contact HP Customer Support.^ |w ^ LBR, Librarian Routi661LONOMTCHFOU, no match foundnes5The specified module is not in the module name table.5Ensure that the module exists in the current library.^ 'x1X[&OLDLIBRARY, old format library openednes;This success message is generated by the Librarian routines;when a library that is not in the current format is opened.None.^ -1^a,OLDMISMCH, old format library type mismatchnes:The requested Version 1.0 library is a different type from;the type expected. Processing continues based on the actual library type.None.^ 2X(1cf1V5LIBRARY, V5 format library being changed to V6nes:The Librarian has modified the version format level of theopened library to Version 6.'None. This is an informational message.^ r1HKMAPPED, module mappednes>This informational status return from LBR$MAP_MODULE indicates2that the requested module has already been mapped.None.^  D1ORNOTMAPPED, module not mappednesdetermine why it is no longer mapped and perform the operationagain.^ w!U{1>MODINUSE, module is being put into library; put_module access prohibitednes>A record-oriented, module-insert operation (LBR$PUT_RECORD) isOpenVMS Utility Routines Manual for a description of key types!and provide the appropriate type. ^ $71hk>6INVEOBJSIZ, invalid or missing ELF object module sizenesare, you must modify your code to check the library type being6used and make the call to the correct library service.^ * =51ORILLTYP, illegal library typenes21PSNOHLPTXT, help text not foundnes=There is no help text associated with the specified key path.1Check that the help module is properly formatted.^  ,N1]`+EMPTYHIST, library update history is emptynes8The library has an update history, but no update historyrecords are present.None.^ 5K;1fi4USRINPERR, user input routine returned error statusnes9A user-supplied input routine returned an error status toLBR$OUTPUT_HELP.:Determine the reason for the failure in the input routine. ^ d:1KNKEYNOTFND, key not foundnes;The Librarian cannot find the key specified in the key name'argument to the LBR$LOOKUP_KEY routine.9Correct the key name argument before calling the routine.!!^ IJ1PSTOOMNYARG, too many argumentsnes>A call to a Librarian function passed more arguments than were expected.9Reduce the number of arguments so that the call is in thecorrect format.""^  61gj5ENDTOPIC, request LBR$OUTPUT_HELP terminate printingnesEither the library is not open or an illegal library index was specified.=Determine that the library is open and that the library index is correct.&&^ X-1NQLIBNOTOPN, library not opennes=Except for LBR$INI_CONTROL and LBR$OPEN, all routines requirethat the library be open.,Open the library before calling the routine.''^ Y1ORLIBOPN, library already opennes=The library you attempted to open is already open. Processingof your program continues.None.((^  ,1QTILLFMT, illegal library formatnes+The file calling LBR$OPEN is not a library.Specify the correct library.))^  #791TW"ILLFUNC, illegal library functionnes6The library function specified in LBR$OPEN is illegal.8Correct the library function before calling the routine.**^  !'51RU| ILLIDXNUM, illegal index numbernes&The specified index number is illegal.4Correct the index number before calling the routine.++^ .,1FIwINVRFA, invalid RFAnes-The specified record file address is invalid.+Correct the RFA before calling the routine.,,^ {%1PSxRECLNG, illegal record lengthnes$The record length exceeds 512 bytes.Reformat the module.--^  9R?1jm8ILLINROU, input routine improperly specified or missingnes>A Librarian function is called with a missing or invalid inputroutine parameter.=If no input routine is passed to the Librarian function, then;supply one; or check the values of the other arguments that=were passed to ensure that none of the arguments specify that>the input routine parameter is required. If a routine value is=supplied, then check that it is a valid address (for example, nonzero)...^  T';18INTRNLERR, LBR internal error; contact a Compaq support representativenes&This is an internal consistency check.:Retain any relevant files and contact HP Customer Support.//^ U1ILNULIDX, index is emptynes>The specified index is found empty on a call to LBR$GET_INDEX.Processing continues.None.00^ %@31VY$LKPNOTDON, lookup has not been donenes7LBR$LOOKUP_KEY is not called before calling up LBR$GET_RECORD.2Call LBR$LOOKUP_KEY before calling LBR$GET_RECORD.11^ "1SV !TYPMISMCH, library type mismatchnes5On a call to LBR$OPEN, the library type you requested7conflicts with the library type specified in the create:options argument. Processing continues based on the actual library type.None.22^  /Mc1`c.ILLOP, illegal operation for access requestednes>An attempt was made to modify a Version 1.0 library or a read- only library.;Compress the library into the current format, or change the&access privileges to the library file.33^ @:1MPRECTRUNC, record truncatednes7The buffer supplied in the routine is too small for therecord.9Supply a sufficiently large buffer to contain the record.44^  ;SG1lo :ILLOUTROU, output routine improperly specified or missingnes8A Librarian function is called with a missing or invalidoutput routine parameter.9If no output routine is passed to the Librarian function,A string descriptor passed to a general library procedure does¬ contain a valid DSC$B_CLASS field.9Locate the call to the library that caused the error, and=initialize the field to the proper class of descriptor. Refer>to the run-time library documentation for a description of theclasses of descriptors.99^ A +[1\]S*ILLRECLEN, illegal record length 'length'yILLRECTYP, illegal record type 'type' in module 'module-name'y>^ ]S1NOINVARG, invalid argument(s)y;A calling program passed one or more invalid arguments to a run-time library (LIB$) routine.The string passed to the LIB$TPARSE library procedure containsa syntax error.'Correct the syntax error in the string.AA^  !1RS ERRROUCAL, error routine calledy=One or more errors were detected during a call to LIB$DELETE_>FILE or LIB$RENAME_FILE, but a user-specified error routine is=called to handle the conditions. This is an alternate successstatus.None.BB^ /WX1`a.INVTYPE, invalid LIB$TPARSE state table entryy=The state table passed to the LIB$TPARSE procedure is invalidand cannot be processed.;Refer to the run-time library documentation for the correctformat for the state table.CC^ b+o1\]t*NOCLI, no CLI present to perform functiony6The calling process does not have a CLI to perform the7function, or the CLI does not support the request type.:Ensure that the calling process has a CLI and that the CLI7supports the request type. (Note that an image run as a4subprocess or detached process does not have a CLI.)DD^ !0<H1ab/ONEDELTIM, at least one delta time is requiredy;The LIB$DATE_TIME routine requires at least one delta time.;Determine which argument is incorrect and replace it with a delta time.EE^ "~1PQONEENTQUE, one entry in queuey:The procedure successfully completed. An entry is added to;the front of the queue. As a result, the queue contains oneentry.None.FF^ r' \[1AILLSYMLEN, symbol 'symbol' has illegal length 'length' in module 'module-name'y=81op=INVCLADTY, invalid class data type combination in descriptoryMake sure the date-time input string matches the input format.VV^ Ck+E1\]U*AMBKEY, 'keyword' is an ambiguous keywordy=Too few characters were used to truncate a keyword to make it1kl)9NODTOOLNG, primary node name too long after being quotedy;When quotation marks are added to the primary node name, itAn input string accepted by LIB$GET_INPUT was truncated to fit>the string descriptor passed to it. This message is associated=with a status code returned from a run-time library procedure6and is not normally displayed by the operating system.:Correct your program by increasing the field length in the descriptor.bb^ ^*<1[\4p)ATTCONSTO, attempt to continue from stopy>A condition-handling routine attempted to continue from a callEnsure that the correct event flag number is used in the call.jj^  (\?1YZ'EF_ALRRES, event flag already reservedy9A call is made to LIB$RESERVE_EF to receive an event flag!number that is already allocated.>Ensure that the correct event flag number is used in the call.kk^  lb1QR INSEF, insufficient event flagy>A call is made to LIB$GET_EF to allocate an event flag number,,but all event flag numbers were unavailable.7Use LIB$FREE_EF to free previously allocated event flag)numbers if they are no longer being used.ll^  *#1[\)EF_RESSYS, event flag reserved to systemyflag number. Ranges for valid event flag numbers are 1 through23 and 32 through 63."Specify a valid event flag number.mm^ L<1DE^BADSTA, bad stacky;The user stack has an invalid format or cannot be accessed.:Recompile your program with the /CHECK=BOUNDS qualifier to>determine whether an array reference is out of bounds. If this;does not correct the problem, use the debugger to determine&where your program modifies the stack.nn^ D+?1\]V*INVNBDS, invalid numeric byte data stringy8The string of bytes specified as an NBDS is not an NBDS.:Numeric byte data strings are explained in the LIB$CVT_DX_=DX routine documentation in the HP OpenVMS RTL Library (LIB$)Manual.>Check the NBDS descriptor against LIB$CVT_DX_DX documentation.oo^  5>1fg(4ELETOOLON, element too long, maximum 255 charactersy:The initialization string element passed to LIB$INIT_DATE_;TIME_CONTEXT is too long; the maximum length allowed is 255 characters.=Begin debugging procedures to verify and correct the problem.pp^ #D11TU"NOHOSNAM, no host node name foundy;The run-time library cannot get the host node name from thesystem.>This routine gets the local node name by searching through the following sources in this order:o $GETSYIW system services7o A translation of the executive mode logical SYS$NODE_ FULLNAME6o A translation of the executive mode logical SYS$NODE7Ask your system manager if these sources are available.qq^ &/1WX%INVOPER, invalid operation specifiedy.The operation code is out of range or invalid.Correct the operation code.rr^ '1XY&INVOPEZON, invalid operation for zoney=The item code is invalid for the specified zone. This message:is also returned for an invalid use of an unspecified userzone action routine.Specify a valid item code.ss^ )W1Z[(KEYALRINS, key already inserted in treey=A key is found in the tree, so a new key is not inserted. Theoperation is successful.None.tt^ k)1Z[}(PAGLIMEXC, page limit exceeded for zoneyrequest has attempted to allocate more pages than specified by&the page_limit attribute for the zone.=Modify your program to allocate fewer pages, to create a zone:with a higher page limit, or to request pages from anotherzone.uu^ "1ST !STRIS_INT, string is interlockedy:Code being executed at AST level attempted to write into a=string that is already being written into or whose length was=being used for length computation immediately before the AST.=Do not write to strings at AST level that are used at non-AST;level or in other AST-level processing. If you must use the;same strings for interrupt routines, disable the ASTs while#string assignments are in progress.vv^ h>1OPBADBLOADR, bad block addressy>Either the LIB$FREE_VM or LIB$GET_VM library routine is called(with an invalid virtual storage address.=Begin debugging procedures to verify and correct the problem.(JOBDELETE, job deleted before execution>The affected job was deleted by a DELETE/ENTRY or DELETE/QUEUEcommand before it executed.If necessary, resubmit the job.HP Customer Support.ithin the image rather than to a debug4section where the modification is supposed to occur.5Have your system manager contact HP Customer Support. Q'!  LIB, Library Facilit#^1TU="BADTAGVAL, bad boundary tag valueyare longwords appended to the end of each block that store the>size of the block. Before a block is freed, LIB$FREE_VM checks,that these blocks have not been overwritten.8Modify your program to ensure that it writes only to the$memory locations that it can access. bRU1t:STRLVL, illegal object language structure level in module 'module-name'yEither the library routine LIB$GET_VM is called with a request7for 0 blocks, or the requested block size is too large.=If the requested block size is 0, correct the source program.=If the specified block size is too large, use the DCL command=SET WORKING_SET to increase the current working set limit for#your process and retry the program. J"\1ST\!KEYNOTFOU, key not found in treey=The specified key is not found in the tree. One cause of this9error is when the LIB$FIND_IMAGE_SYMBOL call is unable to3locate the specified symbol in the specified image.=Check for a missing or erroneous symbol name specification ina LIB$FIND_IMAGE_SYMBOL call. &E;1WX%NEGTIM, a negative time was computedy=The computed time was less than the system zero date (17-NOV-1858).:Examine each argument and the order in which it is passed.  +o_1\]+*INSLUN, insufficient logical unit numbersy8A call is made to LIB$GET_LUN to allocate a logical unit5number, but all logical unit numbers are unavailable.:Use LIB$FREE_LUN to free previously allocated logical unit#numbers if they are no longer used. aK1KL(sSTRTRU, string truncatedy;A run-time library procedure returned a string that did not8fit into the specified receiving area, resulting in lost=trailing characters. This message is associated with a status(code returned from the Run-Time Library.>Correct your program to increase the area specified to receive the string. ^A[1rsp@BADCCC, illegal compilation code 'code' in module 'module-name'yAn absolute time is passed to the routine, but a delta time is required.'Change the absolute time to delta time. H (B1YZZ'INSVIRMEM, insufficient virtual memoryy9The application was unable to allocate additional virtualmemory.1DELBADZONE, bad zoney9LIB$SHOW_VM_ZONE, LIB$STAT_VM_ZONE, or LIB$VERIFY_VM_ZONE:is called with a zone identifier that does not represent aA delta time is passed to the routine, but an absolute time is required.*Change the delta time to an absolute time.  q[1@ILLFMLCNT, minimum argument count exceeds maximum for procedure/ 'procedure' in module 'module-name'yindependent screen procedures created more data than would fitin an entire buffer.6Increase the size of the buffer specified in a call toLIB$PUT_BUFFER.  :&1kl9ILLFORMAT, illegal format, too many or not enough fieldsy%An invalid format string was entered.Correct the date/time string.  !1RS INTLOGERR, internal logic errory=A LIB$ routine detected an internal logic error. This message;is associated with a status code returned from the run-timelibrary.Contact HP Customer Support. O181bc)a0SECINTFAI, secondary interlock failure in queuey>Secondary interlock failed (severe error) retry-cnt times in a=row. The queue is not modified. This condition can occur onlyVerify that the initialization string begins and ends with thesame delimiter character.  I41KLINTOVF, integer overflowy>Either the library routine or the hardware detected an integer overflow.3Choose a destination data type with a larger range. H 2[1cdZ1EOMWARN, compilation warnings in module 'module'yFLTUND, arithmetic trap, floating underflow at PC='xxxxxxxx', PSL='xxxxxxxx'y9An arithmetic exception condition occurred as a result offloating-point underflow.;Examine the PC location displayed in the message; check the8program listing to verify that operands or variables arespecified correctly. 9#[1TUK"SEQUENCE, illegal record sequenceyA Librarian function is called with a missing or invalid inputroutine parameter.=If no input routine is passed to the Librarian function, then;supply one; or check the values of the other arguments that=were passed to ensure that none of the arguments specify that>the input routine parameter is required. If a routine value is=supplied, then check that it is a valid address (for example, nonzero)...^  T';18INTRNLERR, LBR internal error; contact a Compaq support representativenes&This is an internal consistency check.:Retain any relevant files and contact HP Customer Support.//^ U1ILNULIDX, index is emptynes>The specified index is found empty on a call to LBR$GET_INDEX.Processing continues.None.00^ %@31VY$LKPNOTDON, lookup has not been donenes7LBR$LOOKUP_KEY is not called before calling up LBR$GET_RECORD.2Call LBR$LOOKUP_KEY before calling LBR$GET_RECORD.11^ "1SV !TYPMISMCH, library type mismatchnes5On a call to LBR$OPEN, the library type you requested7conflicts with the library type specified in the create:options argument. Processing continues based on the actual library type.None.22^  /Mc1`c.ILLOP, illegal operation for access requestednes>An attempt was made to modify a Version 1.0 library or a read- only library.;Compress the library into the current format, or change the&access privileges to the library file.33^ @:1MPRECTRUNC, record truncatednes7The buffer supplied in the routine is too small for therecord.9Supply a sufficiently large buffer to contain the record.44^  ;SG1lo :ILLOUTROU, output routine improperly specified or missingnes8A Librarian function is called with a missing or invalidoutput routine parameter.9If no output routine is passed to the Librarian function,A string descriptor passed to a general library procedure does¬ contain a valid DSC$B_CLASS field.9Locate the call to the library that caused the error, and=initialize the field to the proper class of descriptor. Refer>to the run-time library documentation for a description of theclasses of descriptors.99^ A +[1\]S*ILLRECLEN, illegal record length 'length'yILLRECTYP, illegal record type 'type' in module 'module-name'y>^ ]S1NOINVARG, invalid argument(s)y;A calling program passed one or more invalid arguments to a run-time library (LIB$) routine.The string passed to the LIB$TPARSE library procedure containsa syntax error.'Correct the syntax error in the string.AA^  !1RS ERRROUCAL, error routine calledy=One or more errors were detected during a call to LIB$DELETE_>FILE or LIB$RENAME_FILE, but a user-specified error routine is=called to handle the conditions. This is an alternate successstatus.None.BB^ /WX1`a.INVTYPE, invalid LIB$TPARSE state table entryy=The state table passed to the LIB$TPARSE procedure is invalidand cannot be processed.;Refer to the run-time library documentation for the correctformat for the state table.CC^ b+o1\]t*NOCLI, no CLI present to perform functiony6The calling process does not have a CLI to perform the7function, or the CLI does not support the request type.:Ensure that the calling process has a CLI and that the CLI7supports the request type. (Note that an image run as a4subprocess or detached process does not have a CLI.)DD^ !0<H1ab/ONEDELTIM, at least one delta time is requiredy;The LIB$DATE_TIME routine requires at least one delta time.;Determine which argument is incorrect and replace it with a delta time.EE^ "~1PQONEENTQUE, one entry in queuey:The procedure successfully completed. An entry is added to;the front of the queue. As a result, the queue contains oneentry.None.FF^ r' \[1AILLSYMLEN, symbol 'symbol' has illegal length 'length' in module 'module-name'y=81op=INVCLADTY, invalid class data type combination in descriptoryMake sure the date-time input string matches the input format.VV^ Ck+E1\]U*AMBKEY, 'keyword' is an ambiguous keywordy=Too few characters were used to truncate a keyword to make it1kl)9NODTOOLNG, primary node name too long after being quotedy;When quotation marks are added to the primary node name, itAn input string accepted by LIB$GET_INPUT was truncated to fit>the string descriptor passed to it. This message is associated=with a status code returned from a run-time library procedure6and is not normally displayed by the operating system.:Correct your program by increasing the field length in the descriptor.bb^ ^*<1[\4p)ATTCONSTO, attempt to continue from stopy>A condition-handling routine attempted to continue from a callEnsure that the correct event flag number is used in the call.jj^  (\?1YZ'EF_ALRRES, event flag already reservedy9A call is made to LIB$RESERVE_EF to receive an event flag!number that is already allocated.>Ensure that the correct event flag number is used in the call.kk^  lb1QR INSEF, insufficient event flagy>A call is made to LIB$GET_EF to allocate an event flag number,,but all event flag numbers were unavailable.7Use LIB$FREE_EF to free previously allocated event flag)numbers if they are no longer being used.ll^  *#1[\)EF_RESSYS, event flag reserved to systemyflag number. Ranges for valid event flag numbers are 1 through23 and 32 through 63."Specify a valid event flag number.mm^ L<1DE^BADSTA, bad stacky;The user stack has an invalid format or cannot be accessed.:Recompile your program with the /CHECK=BOUNDS qualifier to>determine whether an array reference is out of bounds. If this;does not correct the problem, use the debugger to determine&where your program modifies the stack.nn^ D+?1\]V*INVNBDS, invalid numeric byte data stringy8The string of bytes specified as an NBDS is not an NBDS.:Numeric byte data strings are explained in the LIB$CVT_DX_=DX routine documentation in the HP OpenVMS RTL Library (LIB$)Manual.>Check the NBDS descriptor against LIB$CVT_DX_DX documentation.oo^  5>1fg(4ELETOOLON, element too long, maximum 255 charactersy:The initialization string element passed to LIB$INIT_DATE_;TIME_CONTEXT is too long; the maximum length allowed is 255 characters.=Begin debugging procedures to verify and correct the problem.pp^ #D11TU"NOHOSNAM, no host node name foundy;The run-time library cannot get the host node name from thesystem.>This routine gets the local node name by searching through the following sources in this order:o $GETSYIW system services7o A translation of the executive mode logical SYS$NODE_ FULLNAME6o A translation of the executive mode logical SYS$NODE7Ask your system manager if these sources are available.qq^ &/1WX%INVOPER, invalid operation specifiedy.The operation code is out of range or invalid.Correct the operation code.rr^ '1XY&INVOPEZON, invalid operation for zoney=The item code is invalid for the specified zone. This message:is also returned for an invalid use of an unspecified userzone action routine.Specify a valid item code.ss^ )W1Z[(KEYALRINS, key already inserted in treey=A key is found in the tree, so a new key is not inserted. Theoperation is successful.None.tt^ k)1Z[}(PAGLIMEXC, page limit exceeded for zoneyrequest has attempted to allocate more pages than specified by&the page_limit attribute for the zone.=Modify your program to allocate fewer pages, to create a zone:with a higher page limit, or to request pages from anotherzone.uu^ "1ST !STRIS_INT, string is interlockedy:Code being executed at AST level attempted to write into a=string that is already being written into or whose length was=being used for length computation immediately before the AST.=Do not write to strings at AST level that are used at non-AST;level or in other AST-level processing. If you must use the;same strings for interrupt routines, disable the ASTs while#string assignments are in progress.vv^ h>1OPBADBLOADR, bad block addressy>Either the LIB$FREE_VM or LIB$GET_VM library routine is called(with an invalid virtual storage address.=Begin debugging procedures to verify and correct the problem.(JOBDELETE, job deleted before execution>The affected job was deleted by a DELETE/ENTRY or DELETE/QUEUEcommand before it executed.If necessary, resubmit the job.HP Customer Support.ithin the image rather than to a debug4section where the modification is supposed to occur.5Have your system manager contact HP Customer Support. }c  LIBRAR, LIBRARY Com V1=DIFTYP, expected 'library-type' library 'library-spec' to be 'library-type'and6The specified library is of a different type from that;indicated in the command string. Processing continues basedon the actual library type.None. GB>1svYALOOKUPERR, error looking up 'module-name' in 'library-file-spec'and=The Librarian utility cannot find the requested module in the>module name table, an RMS file system error occurred, or there'is not enough virtual memory available.=Reenter the command line, specifying an existing module name. V< 1BNOMTCHENDM, no matching .ENDM for macro 'macro-name' in 'library- name'and;The specified macro does not contain a matching .ENDM line.Reformat the macro source file. DO.1uxCNOTASHRIMG, file 'file-name' is not an OpenVMS AXP shareable imageand=The file given as input to a shareable image library is not ashareable image.-Relink the image using the LINK/SHARE option. \H1?NOMTCHENDR, 'location' missing .ENDR for macro 'macro-name' in 'library-name'and7The Librarian utility found a matching .ENDM before therequired .ENDR.Correct the macro source file. /U)1`c.NOMTCHFOU, no matches found for 'module-name'and;The module specified with the /ONLY qualifier is not in themodule name table (MNT).(Ensure that the specified module exists. A,91ru@MHDERR, module header error for 'module-name' in 'library-name'and+The specified module has an invalid header.8Compress the library before reentering the command line. U1BBRKNLIB, library 'library-name' not properly closed - compress or rebuildand>An error that occurred during a previous update to the library:interrupted the write operation, leaving the library in aninconsistent state.;This library can no longer be modified, but it can be read.=Uncorrupt data can be reclaimed by compressing the library or4by extracting modules and re-creating a new library. (Xi19EELFLIB, OpenVMS ELF processing not active; library 'library-name' is ELF typeand=An attempt was made to work with an ELF library on an OpenVMS;Alpha or OpenVMS VAX system. Only the OpenVMS I64 Librarian2and Library services will work with ELF libraries.;Ensure that the library you are working with is the correct,one for the system on which you are working. )3Di1dg2NONELFLIB, library 'library-name' is not type ELFand:An attempt was made to insert an ELF module into a non-ELFlibrary.;Ensure that the library you are inserting into has the same,type as the module you are trying to insert. *FDi1wz'ENOTELFFILE, 'file-name' is not an ELF object or shareable image fileand:An attempt was made to insert a non-ELF module into an ELFlibrary.;Ensure that the library you are inserting into has the same,type as the module you are trying to insert. +?}61ps&>UNKGRPFLG, flags for group 'group_name' have unknown settingsand8The Librarian has detected that a language processor has;emitted incorrect settings for a group within an ELF objectmodule.5Have your system manager contact HP Customer Support. ,E1vyDMAPMODERR, module 'module-name' not found in library 'library-name'and8The Librarian encountered an error mapping the module to9process P2 space. A secondary message indicates the causeof the problem.=Correct the problem and issue the command again. If the cause>is quota problems, please refer to the Release Notes for clueson how to solve the problem. -Bo1svACHGDATSTRUC, library 'library-name' upgraded to format version 6and:The format level of the ELF object module or ELF shareable3image library has been converted to format level 6.None. f.Ek1vy xDNOTSUPPORT, Alpha and VAX qualifiers not supported by I64 Librarianand;The OpenVMS I64 Librarian will list the contents of OpenVMS;Alpha and OpenVMS VAX libraries, but it will not accept the/ALPHA and /VAX qualifiers.;Remove the architecture qualifier from the command line and.ensure that you are using the correct library. /A^=1ru@OPTNOTSUPPORT, /NAMES keywords supported for ELF libraries onlyand=A keyword was entered with the /NAMES qualifier. Keywords areallowed for ELF libraries only.1lo:REMOVED, symbol 'symbol-name' removed from 'library-name'and=This success message is generated by the DCL command LIBRARY.None. ;;>1lo:REPLACED, module 'module-name' replaced in 'library-name'and=This success message is generated by the DCL command LIBRARY.None. 1=<F1mpC;REPLACERR, error replacing 'module-name' in 'library-name'and8An error occurred during a module replacement operation.:Either an RMS file system error occurred or enough virtualmemory is not available.The name of the object module you attempted to insert into the&library exceeds the name-length limit.7Rename the module before inserting it into the library. IB^C1svAMACNAMLNG, macro 'macro-name' name is too long in 'library-name'and>The name of the macro you attempted to insert into the libraryexceeds the name-length limit.;Either rename the macro or extend the library's name-lengthlimit. c o4B1EGSDTYP, module 'module-name' file 'library-file-spec' has an illegal( GSD record (type 'record-type')and3The specified object module is illegally formatted.8Recompile the object module before inserting it into thelibrary. k D>1uxCEXTRACTED, module 'module-name' extracted from 'library-file-spec'and=This success message is generated by the DCL command LIBRARY.None. l 4P 1eh3EXTRAENDM, extraneous .ENDM in 'library-file-spec'and:The specified library contains an .ENDM line that does notterminate any macro.Reformat the macro source file. %tu<R17;NOTOBJLIB, library 'library-name' is not an object libraryand=An attempt is made to cross-reference a library or to use the4/REMOVE qualifier in a macro, help, or text library.;Reenter the command line, specifying an object library thatcontains the requested symbol.  );1Z]!(INDEXERR, index error in 'library-name'and=An error occurred while searching or traversing the index; anAsk the system manager to increase your page file quota or, onAINVKEYCHAR, key not inserted; 'ASCII-character' (%X'hexadecimal-0 byte') is not a valid key characterand1lo:INSERTED, module 'module-name' inserted in 'library-name'and=This success message is generated by the DCL command LIBRARY.None.''  <''1mp;INSERTERR, error inserting 'module-name' in 'library-name'and9One of the following conditions prevented the DCL command5LIBRARY from inserting the specified modules into thelibrary:*o The modules are not formatted correctly.2o The organization of the input file is incorrect.$o An RMS file system error occurred.%o There is not enough virtual memory.&Correct the error and insert the file.(( ;J;1lo:NOHLPTXT, no level 1 help text found in 'input-file-spec'and>The specified input file does not contain a properly formatted help file.:Reformat the help file before reentering the command line.)) $ 9=1jm68DELDATERR, error deleting data from 'library-file-spec'and:An error occurred during an attempt to delete the text; an>RMS file system error occurred; or there is not enough virtualmemory available.1qt?DELETED, module 'module-name' deleted from 'library-file-spec'and=This success message is generated by the DCL command LIBRARY.None.,, >U81or=KEYNAMLNG, key 'key-name' name length illegal in 'file-spec'and=The name of the module being inserted exceeds the name lengthlimit for the library.7Rename the module before inserting it into the library.-- f0:1DSTRLVL, object structure level 'nnn' unsupported in module 'module- name' in 'library-name'and/An illegally formatted object file is inserted.9Recompile the object file and insert it into the library... Y571=NESTLEVEL, nesting level exceeded in macro 'macro-name' file 'library-name'and4The specified macro exceeds the nesting limit of 63.6Change the macro before inserting it into the library.// q Bq1svADELKEYERR, error deleting 'module-name' from 'library-file-spec'and;The module you want to delete does not appear in the module>name table; an RMS file system error occurred; or there is not enough virtual memory available.8List the library to see if the module is present. If so,7correct the problem before reentering the command line.00 Di1uxCCNVRTING, 'library-file-spec' is a copy of 'old-library-file-spec'and3The specified modification to a Version 1.0 library4automatically converts it to the new library format.None.11 D1 1uxCTOOMNYENDR, too many .ENDR in macro 'macro-name' in 'library-name'and0The specified macro contains an unmatched .ENDR.Reformat the macro source file.22 Xm912CCOMCOD, compilation 'error' in module 'module-name' file 'library- file-spec'and:The object module you are inserting contains a compilation1error, a warning, or an illegal compilation code.8Recompile the module before reentering the command line.33  da 1BENDWRNGMAC, .ENDM 'macro-name' does not end macro 'macro-name' in 'library-file-spec'and;The macro name following the .ENDM statement does not match$the name of the macro it should end.Reformat the macro source file.44 "_[F14ARECLNG, illegal record length ('nnn') in module 'module-name' in 'library-file-spec'and=The specified module contains records that exceed the maximumrecord length of 2048 bytes.The specified input file does not contain a properly formattedmacro.Reformat the macro source file.77 ^p91pDSYMNAMLNG, symbol 'module-type' module 'module-name' file 'library-* name' has illegal length 'nnn'and8The specified module name exceeds the name length limit.:Make sure that all the symbol names in the module are less=than the library's name length limit, or compress the librarywith a larger key length.88 6H41gj5NOMODNAM, no module name found for 'input-file-spec'and>An attempt was made to insert unnamed text modules into a textlibrary.3Use the /MODULE qualifier to name the text modules.99 /9qc1jmA8NOSYMBOLS, no global symbol table found in 'image-name'and;There is no symbol table in the shareable image. The linker4always produces a symbol table, even if it is empty.;If this error persists after relinking, retain the relevant&files and contact HP Customer Support.:: ^=51@RECTYP, illegal record type ('type') in module 'module-name' in 'library-file-spec'and> E#1v )DINVALID_VERSION, license is invalid for this version of the productagement Utility;The version number on the license is lower than the product>version; the license does not authorize use of this version of the product.:See your system manager. A Product Authorization Amendment=(PAAM) may not be registered and loaded, or a new license for;the product may have been obtained but not registered. YourA reservation list or combined reservation lists for a license7include too many names. When a LICENSE LOAD command was9entered, LMF checked this list and eliminated one or more*names from the activated reservation list.9Modify the reservation list or lists to have fewer names.>Check for repeated names; LMF does not check for redundancies.@@ ?#(1p+>LICIGN, 'product' 'authorization' License Ignored Not Virtualagement Utility=This message is returned to log the licenses that are ignored:and not loaded while loading on an OpenVMS guest system in a cluster.7Modify the license using /VIRTUAL and reload it, if the"OpenVMS guest is a cluster member.;If loading on a standalone guest, the license loads but the=message is displayed. This message indicates that the license#r1o~=VIRLICIGN, 'product' 'authorization' Virtual License Ignoredagement Utility=This message is returned to log the virtual licenses that are3ignored while loading on a physical OpenVMS system.None.BB  D#{1u~CILLSELECT, invalid table selector was specified - 'table-selector'agement Utility>An invalid activity or availability code was entered. Activity:and availability codes are entered using the /ACTIVITY and7/AVAILABILITY qualifiers to the LICENSE commands, or in;response to prompts from the command procedure VMSINSTAL or VMSLICENSE.;Review the activity or availability code listed on the PAK,>and reenter the code. You may need to contact your PAK issuer.CC xC#D1tFBWRGARCH, 'product-name' license is not valid on this architectureagement Utility:You attempted to load a license that cannot be used on the:current architecture. For example, you attempted to load a>license designated for use only on VAX systems onto an OpenVMS Alpha system.;Obtain the correct Product Authorization Key (PAK) for yoursystem.DD &n#V1 >NOCOMB, multiple licenses could not be combined for 'product'. Authorization: 'authorization-number'agement Utility;LMF cannot combine licenses. Not all licenses for a product6can be combined. The only fields that can differ amongFor the first problem, see your system manager. For the second:problem, access the product when other users have finished=using it. For the third problem, be sure to load all licensesAIDEST, 'product' 'authorization' not transferred, already in databaseagement Utility:An attempt was made to copy or move a license to a license5database that already includes the specified license.,One of the following actions is appropriate:8#H1ixE7BADLDB, error reading license database 'database-name'agement Utility=LMF encountered an error while attempting to read the LICENSE database.9Have the system manager analyze the accompanying RMS file=system message and, if necessary, restore the database from a backup copy.OO ??#H1p>BADLDBWRIT, error writing to license database 'database-name'agement Utility=LMF encountered an error while trying to write to the LICENSE database.a few minutes and enter the command again (for example, if thefile is locked).PP FC:#D1kzX9NOOEDB, The Operating Environment database is not loadedagement Utility;The operating environment database has not been loaded intomemory.=Try to manually load the operating environment database using>the DCL command LICENSE LOAD /OEDB. If you still get an error,contact HP Customer Support.QQ D>#(1o~/=OEDBUPD, Operating Environment Database successfully updatedagement Utility9The LICENSE LOAD/OEDB command succeeded and the operating6environment database was successfully updated with thecontents of LMF$OE.DAT.'None. This is an informational message.RR I7#u1hw6CANCELED, 'product' 'authorization' has been canceledagement Utility;This message is returned when a command is entered with the8/LOG qualifier. The specified license has been canceled.None.SS L@#CK1q?NODELETE, 'product' was not deleted; no matching records foundagement Utility;The license specified with a LICENSE DELETE command was notfound.7Check the name or names of the licenses, then enter thecorrected command.TT N<#l1m|;MODUNITS, number of units cannot be modified for 'product'agement Utility7An attempt was made to change the number of units for a3license that does not include the MOD_UNITS option.=Verify that the correct license is being modified. The number61]l+NOTINRSRVLIST, not in license reserve listagement Utility=You are not in the reservation list attached to this product.5Ask your system manager to add your name to the list.WW [7#1hw 6UNLOADED, 'product' 'authorization' has been unloadedagement Utility;This message is returned when a command is entered with the:/LOG qualifier. The specified license has been deactivatedwith a LICENSE UNLOAD command.None.XX `f#i1(DNOPRIV, insufficient privileges for this operation. CMKRNL, SYSNAM, and SYSPRV are requiredagement Utilitycombinable licenses. Before you can activate a new license for=a product with a license already active on the node, you must%first enter a LICENSE UNLOAD command.None.[[ b[#1$*AALREADYSTARTED, the License Management Facility has already been startedagement Utility=An attempt was made to start the License Management Facility,:but it had already been started. By default, LMF starts atsystem startup.None.\\ f9#8I1jy8BADOPTION, illegal option was specified - 'option-name'agement Utility7An invalid keyword was specified for licensing options.=Review the options as listed on the PAK, and reenter the code correctly.]] g1#r1bq0MOVED, 'product' 'authorization' has been movedagement Utility;This message is returned when a command is entered with the5/LOG qualifier. The specified license has been moved.None.^^ i_#,1BAMBIG, information provided was ambiguous; multiple licenses were found for 'product'agement Utility8An attempt was made to execute an LMF command, but therealways be uniquely identified when the producer, product name,/issuer, and authorization string are specified.+Specify more information about the product.__ 0k2#?1crB1BADOUT, error writing to output file 'file-name'agement Utility4A LICENSE ISSUE command was entered with the /OUTPUT=qualifier; LMF encountered an error while attempting to writeto the specified output file.>Take action based on the accompanying RMS file system message.`` .p>#`b1o~@=NOENABLE, 'product' has been canceled; it cannot be enabled.agement Utility8The LICENSE ENABLE command cannot be used to reverse the&actions of the LICENSE CANCEL command.>Enter the LICENSE CANCEL command with a new date to change the"status of a user-canceled license.aa t;#~1l{:NOENT, no license was loaded for this product - 'product'agement Utility:An attempt was made to deactivate a license with a LICENSE8UNLOAD command. However, no license that matches the one-specified in the command is currently active.;Enter the SHOW LICENSE command to verify that a license forAn attempt was made to register a license with attributes that>LMF does not support. This license uses an unsupported mixtureof license types or options.0A different PAK is needed, one that LMF can use.t. 3%Z  LICENSE, License Mang#\1B?UNSUPCOMBOP, 'product-name' uses an unsupported combination of& options and license typeagement Utility=You attempted to load a license with attributes that LMF does=not support. Specifically, the combination of key options andlicense type is not supported.TERM, 'product' 'authorization-number' license has terminatedagement Utility8The license termination date of an active license in the>LICENSE database is earlier than the current date; the licenseis no longer valid.=See your system manager. The system manager may have canceled=the license or obtained a new license without registering and loading it.  @#1q ?HISDELETED, 'product' 'authorization' history has been deletedagement Utility;This message is returned when a command is entered with the=/LOG qualifier. The history records for the specified licensehave been deleted.None. $#s.1Ud#TERMINATED, license has terminatedagement Utility;The license termination date of a loaded license is earlier6than the current date; the license is no longer valid.=See your system manager. The system manager may have canceled=the license or obtained a new license without registering and loading it.;Alternatively, verify the product name and producer. If you>entered the wrong product name, activate the license again. If=you have products with the same name but different producers,=specify the name of the producer in the LICENSE LOAD command.=If a license is amended, make sure the license is deactivated;with a LICENSE UNLOAD command before attempting to activate2(with the LICENSE LOAD command) the license again. >#},1o~'=NOREMOVE, 'name' was not removed, not in 'product-name' listagement Utility8A LICENSE MODIFY/REMOVE command specified a user name or=node name that is not in the include, exclude, or reservationlist.+Reenter the command using an existing name. F=#jq1n}XEnter a LICENSE MODIFY/RESERVE command to reserve the license,1and then activate it with a LICENSE LOAD command. #8#_^1ix57RNF, the specified license was not found for 'product'agement Utilitydefault, the facility starts when STARTUP.COM is executed. TheEither specify a smaller value or use the defaults by entering a value of 0.  5#t1fu4DELETED, 'product' 'authorization' has been deletedagement Utility;This message is returned when a command is entered with the7/LOG qualifier. The specified license has been deleted.None. V#Q1CNOINC, INCLUDE list must specify exactly one node for 'product' to be loadedagement Utility8An attempt was made to activate a NO_SHARE license in an7OpenVMS Cluster environment that was modified using the7LICENSE MODIFY command. When the LICENSE MODIFY command8was entered, an include list of exactly one node was not specified..Specify exactly one node name with the LICENSE!MODIFY/INCLUDE=node-name command. W 6#a1gvi5EMTLDB, LICENSE database contains no license recordsagement Utility9An attempt was made to activate a license, but no license&records exist in the LICENSE database.9Licenses must be registered before they can be activated.>This message is received at system startup if you have not yetregistered any licenses.  5#t1fu4ENABLED, 'product' 'authorization' has been enabledagement Utility;This message is returned when a command is entered with the7/LOG qualifier. The specified license has been enabled.None. '#n1XgT&NOSTART, licensing cannot be started.agement Utility:LMF encountered an error while attempting to load the LURT;entry or create the logical name table. This message can be;received at system startup or when entering a LICENSE START9command. An RMS file system message follows this message.9Have the system manager analyze the accompanying RMS file3system message to determine the appropriate action. _#!#1DBADCHECKCHAR, invalid checksum character was specified - 'checksum- character'agement Utility An invalid checksum was entered."Enter the correct checksum string. o+#E1\k<*BADVERSION, illegal version was specifiedagement Utility;A LICENSE LIST, REGISTER, or AMEND command was entered with9the /VERSION qualifier and incorrect syntax. The /VERSION;qualifier uses the format integer.integer. Specify wildcardsyntax as *.* but not * alone.A LICENSE LOAD or LICENSE UNLOAD command specified the product9parameter with a wildcard character. This is not allowed.2Specify an exact product name with these commands.  C# ~1t!BINTERINJ, internal LMF error was encountered. Checkpoint 'number'agement UtilityAn internal LMF problem exists.;Record the checkpoint number in this error message. Contact8your system manager, who may need to contact HP CustomerSupport. .#1_n,-NOLOAD, license was not loaded for 'product'agement Utilityreview the license information for the product. If the license8is a clusterwide license, units may have been previouslyallocated to other nodes.  j#:v1|ELISTIGNORED, combination set for 'producer' 'product' includes a PAKE without an include or exclude list; other lists ignoredagement Utility:During the process of combining licenses prior to loading,;the License Management Facility (LMF) detected a PAK in the8set without an include list or exclude list. Under theseThe specified input file does not contain a properly formattedmacro.Reformat the macro source file.77 ^p91pDSYMNAMLNG, symbol 'module-type' module 'module-name' file 'library-* name' has illegal length 'nnn'and8The specified module name exceeds the name length limit.:Make sure that all the symbol names in the module are less=than the library's name length limit, or compress the librarywith a larger key length.88 6H41gj5NOMODNAM, no module name found for 'input-file-spec'and>An attempt was made to insert unnamed text modules into a textlibrary.3Use the /MODULE qualifier to name the text modules.99 /9qc1jmA8NOSYMBOLS, no global symbol table found in 'image-name'and;There is no symbol table in the shareable image. The linker4always produces a symbol table, even if it is empty.;If this error persists after relinking, retain the relevant&files and contact HP Customer Support.:: ^=51@RECTYP, illegal record type ('type') in module 'module-name' in 'library-file-spec'and> E#1v )DINVALID_VERSION, license is invalid for this version of the productagement Utility;The version number on the license is lower than the product>version; the license does not authorize use of this version of the product.:See your system manager. A Product Authorization Amendment=(PAAM) may not be registered and loaded, or a new license for;the product may have been obtained but not registered. YourA reservation list or combined reservation lists for a license7include too many names. When a LICENSE LOAD command was9entered, LMF checked this list and eliminated one or more*names from the activated reservation list.9Modify the reservation list or lists to have fewer names.>Check for repeated names; LMF does not check for redundancies.@@ ?#(1p+>LICIGN, 'product' 'authorization' License Ignored Not Virtualagement Utility=This message is returned to log the licenses that are ignored:and not loaded while loading on an OpenVMS guest system in a cluster.7Modify the license using /VIRTUAL and reload it, if the"OpenVMS guest is a cluster member.;If loading on a standalone guest, the license loads but the=message is displayed. This message indicates that the license#r1o~=VIRLICIGN, 'product' 'authorization' Virtual License Ignoredagement Utility=This message is returned to log the virtual licenses that are3ignored while loading on a physical OpenVMS system.None.BB  D#{1u~CILLSELECT, invalid table selector was specified - 'table-selector'agement Utility>An invalid activity or availability code was entered. Activity:and availability codes are entered using the /ACTIVITY and7/AVAILABILITY qualifiers to the LICENSE commands, or in;response to prompts from the command procedure VMSINSTAL or VMSLICENSE.;Review the activity or availability code listed on the PAK,>and reenter the code. You may need to contact your PAK issuer.CC xC#D1tFBWRGARCH, 'product-name' license is not valid on this architectureagement Utility:You attempted to load a license that cannot be used on the:current architecture. For example, you attempted to load a>license designated for use only on VAX systems onto an OpenVMS Alpha system.;Obtain the correct Product Authorization Key (PAK) for yoursystem.DD &n#V1 >NOCOMB, multiple licenses could not be combined for 'product'. Authorization: 'authorization-number'agement Utility;LMF cannot combine licenses. Not all licenses for a product6can be combined. The only fields that can differ amongFor the first problem, see your system manager. For the second:problem, access the product when other users have finished=using it. For the third problem, be sure to load all licensesAIDEST, 'product' 'authorization' not transferred, already in databaseagement Utility:An attempt was made to copy or move a license to a license5database that already includes the specified license.,One of the following actions is appropriate:8#H1ixE7BADLDB, error reading license database 'database-name'agement Utility=LMF encountered an error while attempting to read the LICENSE database.9Have the system manager analyze the accompanying RMS file=system message and, if necessary, restore the database from a backup copy.OO ??#H1p>BADLDBWRIT, error writing to license database 'database-name'agement Utility=LMF encountered an error while trying to write to the LICENSE database.a few minutes and enter the command again (for example, if thefile is locked).PP FC:#D1kzX9NOOEDB, The Operating Environment database is not loadedagement Utility;The operating environment database has not been loaded intomemory.=Try to manually load the operating environment database using>the DCL command LICENSE LOAD /OEDB. If you still get an error,contact HP Customer Support.QQ D>#(1o~/=OEDBUPD, Operating Environment Database successfully updatedagement Utility9The LICENSE LOAD/OEDB command succeeded and the operating6environment database was successfully updated with thecontents of LMF$OE.DAT.'None. This is an informational message.RR I7#u1hw6CANCELED, 'product' 'authorization' has been canceledagement Utility;This message is returned when a command is entered with the8/LOG qualifier. The specified license has been canceled.None.SS L@#CK1q?NODELETE, 'product' was not deleted; no matching records foundagement Utility;The license specified with a LICENSE DELETE command was notfound.7Check the name or names of the licenses, then enter thecorrected command.TT N<#l1m|;MODUNITS, number of units cannot be modified for 'product'agement Utility7An attempt was made to change the number of units for a3license that does not include the MOD_UNITS option.=Verify that the correct license is being modified. The number61]l+NOTINRSRVLIST, not in license reserve listagement Utility=You are not in the reservation list attached to this product.5Ask your system manager to add your name to the list.WW [7#1hw 6UNLOADED, 'product' 'authorization' has been unloadedagement Utility;This message is returned when a command is entered with the:/LOG qualifier. The specified license has been deactivatedwith a LICENSE UNLOAD command.None.XX `f#i1(DNOPRIV, insufficient privileges for this operation. CMKRNL, SYSNAM, and SYSPRV are requiredagement Utilitycombinable licenses. Before you can activate a new license for=a product with a license already active on the node, you must%first enter a LICENSE UNLOAD command.None.[[ b[#1$*AALREADYSTARTED, the License Management Facility has already been startedagement Utility=An attempt was made to start the License Management Facility,:but it had already been started. By default, LMF starts atsystem startup.None.\\ f9#8I1jy8BADOPTION, illegal option was specified - 'option-name'agement Utility7An invalid keyword was specified for licensing options.=Review the options as listed on the PAK, and reenter the code correctly.]] g1#r1bq0MOVED, 'product' 'authorization' has been movedagement Utility;This message is returned when a command is entered with the5/LOG qualifier. The specified license has been moved.None.^^ i_#,1BAMBIG, information provided was ambiguous; multiple licenses were found for 'product'agement Utility8An attempt was made to execute an LMF command, but therealways be uniquely identified when the producer, product name,/issuer, and authorization string are specified.+Specify more information about the product.__ 0k2#?1crB1BADOUT, error writing to output file 'file-name'agement Utility4A LICENSE ISSUE command was entered with the /OUTPUT=qualifier; LMF encountered an error while attempting to writeto the specified output file.>Take action based on the accompanying RMS file system message.`` .p>#`b1o~@=NOENABLE, 'product' has been canceled; it cannot be enabled.agement Utility8The LICENSE ENABLE command cannot be used to reverse the&actions of the LICENSE CANCEL command.>Enter the LICENSE CANCEL command with a new date to change the"status of a user-canceled license.aa t;#~1l{:NOENT, no license was loaded for this product - 'product'agement Utility:An attempt was made to deactivate a license with a LICENSE8UNLOAD command. However, no license that matches the one-specified in the command is currently active.;Enter the SHOW LICENSE command to verify that a license forAn attempt was made to register a license with attributes that>LMF does not support. This license uses an unsupported mixtureof license types or options.0A different PAK is needed, one that LMF can use.t.Z {d Z LINK, Linker Utility 8!1ii\}7CONFOPTION, conflicting options: 'option' and 'option';The specified options conflict. For example, a base address8was specified for an OpenVMS VAX image being linked with:the /BPAGE qualifier, or a symbol vector was specified for8an OpenVMS Alpha executable or system image. No image is produced. Resolve the conflict and relink.Z +AD1\\*UDFENV, 'undefined environment reference'=An undefined reference to an environment was found after Pass1.8Determine why the reference is undefined and correct the condition.Z mC1HHUDFSYM, 'symbol-name':There are strong undefined symbol references after Pass 1.1This message is issues for each undefined symbol.7Determine why the symbols are undefined and correct the condition.Z 8pz/1JSYMVABNORMAL, Symbol 'string') defined in module 'module-name' as DATA& was declared in options as PROCEDURE8The specified symbol is defined as data in the specified8module but is declared as a procedure in a SYMBOL_VECTORoption..Correct the SYMBOL_VECTOR= option, and relink.Z  ":!1SS!CONFQUAL, conflicting qualifiers9A qualifier conflicts with a qualifier already specified. Resolve the conflict and relink.Z CP>1ttBSYMVALRDEF, symbol 'symbol-name' already defined in SYMBOL_VECTOR8The specified symbol name is defined more than once in aSYMBOL_VECTOR= option.=Remove the duplicate definitions from the option, and relink.Z  %61VV$ILLQUALVAL, illegal qualifier value5The command line contains an illegal qualifier value.Reenter the command correctly.Z A$1rr@MEMBUG, memory (de)allocation bug 'number', 'address', 'number'#There is a problem with the linker.Contact HP Customer Support. Z  @2!1qq?CONFQUAL2, conflicting qualifiers: 'qualifier' and 'qualifier'1The specified qualifiers cannot be used together. Resolve the conflict and relink. Z  j.E14ILLRECLEN, illegal record length ('decimal-number')4 in module 'module-name' file 'file-name'-A module contains a record of illegal length.:Contact HP Customer Support about the appropriate language compiler. Z  B=1ssAMEMFUL, insufficient virtual address space to complete this linkperformance of the image during execution of references to the=address. To avoid this, correct the source to avoid unaligned*address references, recompile, and relink.Z }P1;NOMPSCALL, psect 'psect-name' is marked NOMOD but has zero@ allocation in module 'module-name', file 'file-name'9The specified program section (psect) was marked NOMOD by:the linker, but no virtual memory is allocated for it; the:object module is corrupt. NOMOD program sections must have=virtual memory allocated. The NOMOD attribute of the psect isremoved.performance of the image during execution of references to the=address. To avoid this, correct the source to avoid unaligned*address references, recompile, and relink.Z Y 1uk;CONPSCATT, NOMOD attribute conflicts with 'attribute'; set: to NO'attribute' in psect 'psect-name', module+ 'module-name', file 'file-name'9Both the NOMOD attribute and the specified attribute were6present for the specified program section (psect). The/specified attribute was negated for that psect.6None required. The NOMOD attribute of the psect can be:specified only by the language processor that compiled the;module. To reset the psect attribute that has been negated,The specified shareable image file is linked under the OpenVMS"Version 2.0 or Version 2.1 linker.%Relink the specified shareable image.Z i1ERELOFIXDZ, deferred relocation/fixup is within a demand zero section" at location 'location'zero sections must not have information written to them during8the link process. This condition indicates a compiler or linker fault.Contact HP Customer Support.Z H16ADRWRTDAT, address data in shareable writable section' in psect 'psect-name' offset 'number'* in module 'module-name' file 'file-name'8The object language equivalent of the VAX MACRO .ADDRESS;directive is encountered in a common section, such as those=found in VAX BASIC, VAX FORTRAN, or VAX PL/I. This causes the7section to be nonshareable; the linker bases the image.=Remove the address data from the command and initialize it at run time.Z 1ARELOFIXLKG, relocation/fixup to a linkage section that is markedC overlaid in psect 'psect-name' in module 'module-name' in file 'file-name'into an image section that contains linkage information and is5marked overlaid. Linkage sections cannot be overlaid.for a linkage section and marked it OVR. If so, delete the OVR attribute.Z Mg1B_ERELOFIXOUT, deferred relocation/fixup is outside image boundaries at location 'location'7 9V1jjP8IMGBASED, shareable image 'image-name' is already based>An options file specifies a base address for a shareable imagethat is already based.;Make the image position-independent so that it can be basednot allocate the address range (displayed in hexadecimal radix.in the message) within the demand zero bitmap.Contact HP Customer Support.((Z 9CC31ttBSHRINSYS, shareable image(s) cannot be linked into a system image;There is an attempt to link a shareable image with a systemimage.2Do not link a shareable image with a system image.))Z 9S1u%=UNIVSTAR, UNIVERSAL=* option is ignored unless /NOEXECUTABLE specified=The UNIVERSAL=* option has been specified in the options fileAn input-object module defines a common area to have a greater;length than the common area of the same name defined in theinput shareable image.>Modify the length of the program section defining common areas<(such as those used in VAX BASIC, VAX PL/I, VAX FORTRAN, and=VAX C) to be less than or equal to the length of that programsection in the shareable image.++Z Z;j"1Jl;SHRPSCREF, reference to psect 'psect-name' is not position= independent in psect 'psect-name' offset 'number'4 in module 'module-name' file 'file-name'>.ADDRESS or general addressing mode is not used in a reference*to a program section in a shareable image.!Correct the reference and relink.,,Z .<=co1nn@S615k=SHRSYMREF, reference to symbol 'symbol-name' is not position= independent in psect 'psect-name' offset 'number'4 in module 'module-name' file 'file-name'9A reference to a symbol in a shareable image does not usegeneral addressing mode.5Correct the reference to use general addressing mode.//Z t?IT12BSHRSYMTRA, Attempted .TRANSFER of shareable image symbol 'symbol-? name' illegal in psect 'psect-name' offset 'number'4 in module 'module-name' file 'file-name'7The .TRANSFER directive specifies a symbol from anothershareable image.>Link with the object modules containing the symbol rather thanthe shareable image.00Z ?P/1WRNERS, compilation warnings1 in module 'module-name' file 'file-name'.The specified module has compilation warnings.Correct the module and relink.11Z @Z?J1?MODNAM, module 'module-name' name length is illegal - not 1 to 'decimal-number'8A module contains a header record with an invalid modulename.>Contact HP Customer Support regarding the appropriate language processor.22Z @Q8x12 SHRWRNERS, compilation warnings/ in shareable image file 'file-name'7The specified shareable image has compilation warnings.=Correct the source, recompile and relink the shareable image,9and relink any images linked against the shareable image.33Z WA ]~]1 iAIMGREQ, qualifier 'qualifier' requires that an image be produced qualifier ignored8The specified qualifier cannot be used in a LINK command>because it requires that the linker operation produce an imagefile.:Reissue the LINK command with the appropriate /EXECUTABLE,!/SHAREABLE, or /SYSTEM qualifier.44Z FA7J1rr@ALIASINUSE, universal alias name 'alias-name' is already in use6The specified alias is associated with another symbol.=Edit the options file to assign a unique alias to the symbol, and relink.55Z Gqt16NOOPTSYMV, symbol 'symbol-name' was defined by option9 and cannot be used in SYMBOL_VECTOR statement>A symbol defined by the SYMBOL= option cannot be included as a4symbol vector entry using the SYMBOL_VECTOR= option. number') in module 'module-name' file 'file-name'9The specified module contains more linkage pairs than arepersists, use the ANALYZE/OBJECT command to collect additional>information. If the compiler was provided by DIGITAL or Compaq2Computer Corporation, contact HP Customer Support.;;Z -N t.l1?DGETPTIERR, error from $GETPTI, buffer 'number', image VPN 'decimal-. number' for 'decimal-number' pages-The $GETPTI system service returned an error.;Preserve all relevant programs, listings, object files, and/library files, and contact HP Customer Support.<<Z Ss5G1 @PSCALI, psect 'psect-name' alignment ('decimal-number') illegal1 in module 'module-name' file 'file-name'4A module specifies an illegal alignment for a psect.:Contact HP Customer Support about the appropriate language translator.==Z PT1bAPSCALIOPT, psect 'psect-name' alignment 'decimal-number' exceeds0 page size, reset to 'decimal-number'' in options file 'file-name'>The specified program section (psect) is aligned on a boundary>of greater granularity than the size of the page specified for=the image. The linker reset the alignment of the psect to thesize of the page.:None required. If you require a psect alignment of greater>granularity, relink the image and specify the /BPAGE qualifier>with a value equal to or greater than the granularity requiredfor the psect.>>Z T1])WRTINDZRO, store into location 'address'@ in psect 'psect-name' from module 'module-name' file4 'file-name' is into a DZRO image section>An attempt was made to write into a demand-zero image section,>which cannot be initialized by an object module. No image will be generated.:Collect all relevant information about the program section>and the language processor that created the object module, andcontact HP Customer Support.??Z 4Ut`A1FAPSCNXR, transfer address is not in executable, relocatable psect1 in module 'module-name' file 'file-name':The transfer address for a module is not in an executable,$relocatable program section (psect).9Move the transfer address into an executable, relocatablepsect.@@Z \DhJ1uu'CALPHASHRNOTBAS, AXP shareable images cannot contain based clusters9OpenVMS Alpha systems do not support basing clusters at a-specific virtual address in shareable images.>Remove the base address from all CLUSTER options used to build the image.AAZ a ^AI1+GSDTYP, illegal GSD record type ('number')1 in module 'module-name' file 'file-name':The specified object module contains an illegal GSD recordtype.>Contact HP Customer Support regarding the appropriate language compiler.BBZ <cR=1N=ALREDEF, multiple .TRANSFER for symbol 'symbol-name' illegal$ psect 'psect-name' offset 'number'* in module 'module-name' file 'file-name'If you want the image to be eligible for code section binding,>remove the dependency between image sections by performing one!or both of the following actions:9o Modify the source code to eliminate the reference; then recompile and relink.The specified option does not apply to an OpenVMS Alpha image.The linker ignores the option.None.NNZ ~/1``.OPTIGNSHR, option ignored for shareable imageshareable image. The linker ignores the option when creating ashareable image.None.OOZ ,G1]]+OPTIGNSYS, option ignored for system image>An options file specifies an option that is ignored for systemimages.None.PPZ \2213MULCLUOPT, cluster 'cluster-name' multiply defined' in options file 'file-name'1An options file defines a cluster more than once.1Delete all but one of the definitions and relink.QQZ @\1qq?OPTIGNVAX, 'option' option ignored, not allowed for VAX imagesVAX BASIC, VAX PL/I, VAX FORTRAN, and VAX C) is defined in two>shareable images. The linker is not able to resolve referencesto it.file name parameter, ensure that the specified debugger module>contains a transfer address. If the file name parameter is not'specified, contact HP Customer Support.ccZ ?w1pp>TFRSYS, transfer address in system image 'image-name' ignored:The linker encountered a transfer address while creating a;system image. System images cannot have transfer addresses.Remove the transfer address.ing the license, reenter the command.;o If you are deactivating the license for a product and the< producer is not DEC (the default), specify the name of the) producer in the LICENSE UNLOAD command.bb LvR#11-^=BADPAK, PAK is for an unsupported license type and cannot be registeredagement Utility>An attempt was made to register a license with attributes that>LMF does not support. This license uses an unsupported mixtureof license types or options.0A different PAK is needed, one that LMF can use.t. BmT  LINK, Linker Utility 8g1ii&7DBINDISABLE, section binding of DATA has been disabled9The /SECTION_BINDING=DATA qualifier was specified and the>linker found dependencies between data references in different:image sections. The image is not eligible for data sectionbinding.>If you want the image to be eligible for data section binding,>remove the dependency between image sections by performing one!or both of the following actions::o Modify the source code to eliminate the references; then recompile and relink.Correct the source code so that the global symbol reference is>not placed in a BYTE or WORD field; then recompile and relink. x3F1"BSTALITUDF, stack of undefined literal 'number' in record 'number'4 in module 'module-name' file 'file-name'2There is an attempt to stack an undefined literal.:Contact HP Customer Support about the appropriate language processor.  V1BUPSCNOCONTRI, universal psect 'psect-name' was not contributed byA any object module deleted from Global Symbol Table9The program section name is specified in a SYMBOL_VECTOR=;option but is not in any of the object modules or libraries6that the linker searched. The psect symbol will not be9available to users of the shareable image, but space will!be reserved in the symbol vector.OUTSIMG, attempted store location 'address' is outside 'name'" ('address' to 'address')2 in module 'module-name' file 'file-name':An attempt was made to store outside the specified program9segment. This may be caused by an attempt to initialize a;shared COMMON of a shareable image when linking against theshareable image.VECTOR= option but does not have the REL and/or GBL attributes=set. The psect symbol will not be available to callers of theshareable image.:Modify the source to set the psect attributes properly and;then recompile; or, modify the appropriate psect attributes/with a PSECT_ATTR= option and relink the image. '1?OUTSIMGP, attempted store location 'address' is outside 'name'# ('address' to 'address')A in psect 'psect-name' module 'module-name' file 'file- name'=An attempt was made to store an address outside the specified7program segment. This is generally due to an attempt toThe value of the FILLM process quota parameter is too low. The5linker cannot open enough files to complete the link.is not compatible with the architecture of the system on whichthe image is being generated.>If you want the image to run on OpenVMS Alpha systems having a=page size larger than that specified by the /BPAGE qualifier,>relink the image, and specify a page size at least as large asCMDTOOLONG, command line too long in options file 'file-name'!An options file line is too long.Shorten the line and relink. WS:1DNOTVAXEOM, AXP end-of-module record found in VAX object file 'file- name'9An OpenVMS Alpha end-of-module record is in the specifiedOpenVMS VAX object file.9Contact HP Customer Support about the language processor. TUF1 fCSTRLVL, illegal object language structure level ('decimal-number')# should be 'decimal-number'1 in module 'module-name' file 'file-name':An object module header record specifies an illegal objectlanguage structure level.:Contact HP Customer Support about the appropriate language processor. 5ew:1 G@NOTVAXGSD, AXP GSD record for symbol 'symbol-name' found in VAX# object file 'file-name'8An OpenVMS Alpha global symbol definition record for the=specified symbol is in the specified OpenVMS VAX object file.9Contact HP Customer Support about the language processor.!! Wk:1-DNOTVAXHDR, AXP module header record found in VAX object file 'file- name'=An OpenVMS Alpha text information and relocation (TIR) record,is in the specified OpenVMS VAX object file.9Contact HP Customer Support about the language processor."" nF!1;BADCCC, bad compilation completion code ('decimal-number')1 in module 'module-name' file 'file-name'4The specified module contains an illegal compilationcompletion code. Recompile the module and relink.## )U1;@BADVERARRAY, unable to resolve 'symbol' to build system version array9The linker cannot resolve all symbols of the form "SYS$K_=VERSION*" to build the system version array. Either SYS$BASE_IMAGE or the linker is corrupt.Contact HP Customer Support.$$ f eS1x?ILLDBGETIR, cannot do fixup for ETIR record ('record-type') in$ debug/traceback contextThe specified modules were not compiled with the same externalfiles (for example, a library). Recompile the specified modules.'' xc1pCLIBFIND, failed to find valid module or STB at RFA 'number:number'3 for module 'module-name' file 'file-name'8The linker tried to read the stated object module at the7specified record file address, but did not find a valid:module. Someone might have deleted a module from a librarybetween Pass 1 and Pass 2.:Retry the link operation. If it continues to fail with the'same error, try rebuilding the library.(( dA]1rrv@BASDUERRS, basing image due to errors in relocatable references:The .ADDRESS directive and general addressing mode are not;used in reference to shareable images. The linker must base/the shareable images to resolve the references.:None: the image will execute properly. However, you should!correct the specified references.)) b _!1StBENTIDMTCHB, 'string' ident of 'number,number' for entity 'string'* in module 'module-name' file 'file-name') does not match ident of 'number,number'* in module 'module-name' file 'file-name'>The specified modules were not compiled with the same externalfiles (for example, a library). Recompile the specified modules.** `N1@LIBNAMLNG, library module name 'module-name' has illegal length ('decimal-number')=A library module name specified in the /INCLUDE qualifier hasillegal length.Reenter the command correctly.++ {rtv1?NOLINKSTB, linker-generated symbol table file is illegal input1 module 'module-name' file 'file-name'>A linker-generated symbol table file was found. Such a file is4not legal input for building an OpenVMS Alpha image.>Relink against the shareable image corresponding to the symbol6table instead of against the symbol table file itself.,, pv@1B>BASENOTALLW, basing shareable image cluster, file 'file-name'6 not allowed for AXP images, base ignored8The linker detected an attempt to base a shareable image;cluster within an image. Basing shareable image clusters is%not allowed on OpenVMS Alpha systems.8Remove the base from the CLUSTER= clause, and relink theimage.-- % ''178ENTIDMTCHO, object type of 'string' for entity 'string'* in module 'module-name' file 'file-name'( does not match object type of 'string'* in module 'module-name' file 'file-name'&Different object types were specified.&Recompile using matching object types... RWC1;BASESYM, base address symbol 'symbol-name' is undefined or relocatable;A symbol used to specify a base address symbolically is notdefined or is relocatable.7Use a defined, absolute symbol to specify symbolic base addresses.// 5 E71G+ENTIDMTCHT, ident type for entity 'string'* in module 'module-name' file 'file-name'B differs from ident type in module 'module-name' file 'file-name'BASSHRBEL, shareable image 'image-name' has base of 'address'2 which is below image base of 'address';The base address of a shareable image specified as input in9the creation of a based shareable image is lower than the&address specified in the BASE= option.>None; however, note that the linker places the input shareable;image at a lower base address than the address specified inthe BASE= option.11 [S1PmA64BBASED, 64-bit psects cannot appear in based cluster 'cluster- name'9An attempt was made to define a 64-bit psect in the named:cluster. This cluster has a base address and 64-bit psects=cannot be defined in based clusters. There may be an internalproblem with the linker.Contact HP Customer Support.22 ^ 8E1+pEILLFMLCNT, minimum argument count ('decimal-number') exceeds maximum ('decimal-number')1 in formal specification of symbol 'symbol-name'* in module 'module-name' file 'file-name'7A procedure definition subrecord has an illegal format.:Contact HP Customer Support about the appropriate language compiler.33 C>uq1ooU=64BINSYS, 64-bit psects cannot be linked into a system image9The /SYSTEM qualifier was specified in a LINK command for:objects or options that contain a 64-bit psect definition.=Do not use the /SYSTEM qualifier in LINK commands for objects2or options that contain a 64-bit psect definition.44 77+1hh&LINERR, command line segment in error 'text'6The specified segment of the command line is in error.*Correct the error and retry the operation.55 +h1\\*64BMOD, 64-bit psects must be demand zero>The image section where the psect resides must be demand zero.(This message indicates a compiler error.Contact HP Customer Support.66 QO%1*NOSUCHMOD, module 'module-name' not found% in library 'library-name'=A module requested from a library with the /INCLUDE qualifiercannot be found.$Correct the command line and relink.77 PWpj1bC64BNODZRO, images linked with /nodemand_zero cannot contain 64-bit psects> ,>51]]+NUDFENVS, 'number' undefined environments:=The linker found undefined environments at the end of Pass 1.4Ensure that all referenced environments are defined.??  h7I15EOMSTK, 'number' items left on Linker internal stack1 in module 'module-name' file 'file-name'6An object module did not leave the linker stack empty.>Contact HP Customer Support regarding the appropriate language compiler.@@ 9 Rga1K;FIRSTMOD, first input file being a library requires module extraction=No input files were specified, or the first file is a library(file with no explicit module extraction.8Specify an input file and reenter the command or use the'/INCLUDE qualifier on the library file.AA 5T=1ff4NUDFLSYMS, 'number' undefined module-local symbols:=Undefined module-local symbols were encountered by the linkerat the end of Pass 1.TRUNC, truncation error in psect 'psect-name' offset 'number'0 in module 'module-name' file 'file-name'>A reference using byte or word relative addressing mode is too far away.9Correct the reference to use longword relative addressingmode.DD '901XX&NUDFSYMS, 'number' undefined symbols:8The linker found undefined symbols at the end of Pass 1./Ensure that all referenced symbols are defined.EE a@1%TRUNCDAT, computed value is 'value1': value written is 'value2' at location 'address'9Usually, this error occurs when a reference using byte or;word PC-relative displacement is made to a target requiring9longword relative displacement. 'Value1' is the value the;linker needed to store; 'value2' is the value the linker is$able to store (a truncated version).9Correct the reference to use longword relative addressingmode.FF 1baddress reference crosses an image section boundary. The first;address specified is the location of the address reference.9The second and third addresses specified are the starting;addresses of the image sections. This can occur if there isdata in a code section.9If you want the referenced image sections to be installed9resident or all the code section address references to be9optimized, remove the relative address dependency betweenimage sections.JJ fd1y.BINDFAILS, binding failed, psect 'psect-name'6 spanned image section located at 'address'9The /SECTION_BINDING qualifier is specified and a program;section (psect) extends across the end of one image section=to the beginning of another. This causes a relative reference-made within the psect to cross this boundary.;Use clusters to create more, smaller image sections, one of'which can completely contain the psect.KK xs1?2CONFIXMEM, conflicting virtual memory requirement* for fixup section for image 'image-name'7 Restructure image or eliminate based shareable images7The linker cannot allocate virtual memory for the fixup8section because a based shareable image is taking up thespace.:Restructure the set of shareable images to be nonbased, or7leave enough space between them for the object modules.LL , D1>AILLNAMELEN, 'name-type' 'name' name length ('decimal-number') isC illegal - not 1 to 'decimal-number' in module 'module-# name' file 'file-name':The length of a program section, module, or symbol name isillegal.Correct the length and relink.MM B 10CONFMEM, conflicting virtual memory requirement< at 'address' for 'decimal-number' pages in cluster 'cluster-name'6Virtual memory required for a cluster has already been allocated.Correct the problem and relink.NN -9F1jj?8NOMODATTIGN, psect attribute NOMOD is not user settable>You cannot specify the NOMOD attribute of a program section. A>compiler sets the NOMOD attribute based on the contents of theprogram section.6Remove the NOMOD attribute from the PSECT_ATTR= optionspecification.OO Y(G1VAX BASIC, VAX PL/I, VAX FORTRAN, and VAX C) is defined in two>shareable images. The linker is not able to resolve referencesto it.file name parameter, ensure that the specified debugger module>contains a transfer address. If the file name parameter is not'specified, contact HP Customer Support.ccZ ?w1pp>TFRSYS, transfer address in system image 'image-name' ignored:The linker encountered a transfer address while creating a;system image. System images cannot have transfer addresses.Remove the transfer address.ing the license, reenter the command.;o If you are deactivating the license for a product and the< producer is not DEC (the default), specify the name of the) producer in the LICENSE UNLOAD command.bb LvR#11-^=BADPAK, PAK is for an unsupported license type and cannot be registeredagement Utility>An attempt was made to register a license with attributes that>LMF does not support. This license uses an unsupported mixtureof license types or options.0A different PAK is needed, one that LMF can use.t. }^  :LINKER11111LINK, Linker Utility MCP, Log Manager Co !s41Q^LOG_BUSY, transaction log busyntrol Program:The dump aborted because the transaction log was too busy.7This can happen when the transaction rate is very high.3Wait until the system is less busy, then try again. $!g@1Ub #LOG_IN_USE, transaction log in usentrol Program>The transaction log cannot be closed because it is in use. The'TP_SERVER process has not been stopped.8Stop all applications that use DECdtm services, then tryagain. ,!L1]j+LOG_NOT_IN_USE, transaction log not in usentrol Program>The transaction log is not in use and the TP_SERVER process is not running.None. E!p1vDUID_INV, resource manager/transaction identifier has invalid formatntrol Program9You entered a hexadecimal resource manager or transaction5identifier containing invalid hexadecimal characters.5Enter the hexadecimal resource manager or transaction8identifier in the format xxxxxxxx-xxxx-xxxx-xxxxxxxxxxxx9(where x is a hexadecimal character in the range 0 to F). U!1P @UID_LENGTH, resource manager/transaction identifier has invalid lengthntrol Program7The resource manager or transaction identifier does not:satisfy the required length of hexadecimal characters. TheSYS$JOURNAL directory, or it is not named using the conventionSYSTEM$node-name.3Refer to the HP OpenVMS System Manager's Manual for6information about naming and placing transaction logs. p7!c1hu/6CHANGE_INV, selected change of state is not permittedntrol Programinvalid sequence; for example, a prepare state is listed aftera commit state.7Note the conditions leading to the error. Make a backup1s&ARNAME_INV, hex resource manager name contains non-hex charactersntrol Program=Either the hexadecimal resource manager name contains invalid)characters, or it was not preceded by %X.=Enter the resource manager name using hexadecimal characters. ,!Y(1]j+RNAME_LONG, resource manager name too longntrol Program=The name entered for the resource manager exceeds 32 ASCII or64 hexadecimal characters.'Enter the correct number of characters. 7!pF1hu+6RNAME_ODD, hex resource manager name is an odd lengthntrol Program=The hexadecimal resource manager name entered contains an odd1number of characters, which prevents translation.8Enter an even number of characters, up to 32 ASCII or 64 hexadecimal. c3!R1dqu2STATE_UNK, transaction state UNKNOWN: 'xx' ('xx')ntrol Program>An attempt was made to dump a record that contained an unknowntransaction state.7Note the conditions leading to the error. Make a backupYou attempted to create a transaction log that is too small touse.;Specify a minimum file size of 100 blocks when you create atransaction log.  @!E1q~?EMPTY_CHECK, checkpoint record contains no active transactionsntrol ProgramFILE_EXISTS, transaction log already exists - current log not supersededntrol Program>The transaction log already exists. This transaction log mightThe section being analyzed by LMCP failed the write check test=(this determines if the section was completely written to the log file).7Note the conditions leading to the error. Make a backupwas attempted on an image offset that has no resultant addresswithin the image.:Disable executive slicing by specifying the LDR$V_NO_SLICE8option or by using the LOAD_SYS_IMAGES system parameter..Correct the bad references in the source code. cK2i1cmu1NO_PAGED_ISDS, cannot load paged ISDs in SYSBOOTage Loader>SYSBOOT failed to load the executive image because it contains)either paged code or paged data sections.=Correct the link procedure used to build the executive image;ensure that each executive image contains only one each of the"types of information listed above.%% Q/t1`jc.BADREFCNT, faulty reference count maintenanceage Loaderare currently restricted from BATCH logins, try an interactive6class (LOCAL, REMOTE, or DIALUP). If you are currently:restricted from all login classes, you cannot log in until9you are permitted to use the system. You may also want to=ask your system manager about the login restrictions for youraccount...  ,6/1]_+FRCPWDERR, error changing expired passwordre5An error occurred while changing an expired password..Take action based on the accompanying message.//  "1SU$*!EVADE, breakin evasion in effectre=Access to an account is denied because break-in evasion is in>effect for that account. This message is written to the system;accounting and security audit records; the NOTVALID messagedisplays to the user.None.00 2 :@M1km9DISRECONNECT, you are not authorized to do reconnectionsre4Authorization is needed to reconnect to disconnected processes.message is written to the system accounting and security audit3records; the NOTVALID message displays to the user.None.22 F 51fh4EXLICENSE, licensed number of system users exceededre6The maximum number of interactive users for which your9system is licensed have already logged in. Further loginsare currently disabled.8Log in after another user has logged off. If the maximum7number of users is exceeded frequently, ask your system5manager whether the system's license can be upgraded.33 L,j91]_+OPENIN, error opening 'file-name' as inputre=A file to be read by LOGINOUT (for example, a file containing+the announcement message) cannot be opened.8Ensure that the file exists and that it has read access.44 1^4%1egC3CAPTIVE, qualifier not allowed in captive accountsre;An attempt was made to use qualifiers (for example, /CLI or>/DISK) on a captive account that is logging in. If the account;logging in is a captive account, no qualifiers may be used.$Retry without specifying qualifiers.55 ^ =CA1npAuthorization is needed for the login class you are attempting>from the current source. The login classes are: LOCAL, DIALUP,;REMOTE, NETWORK, and BATCH. The system manager can restrict/your use of each login class at specific times.=If possible, try a different login class. For example, if you>are currently restricted from BATCH logins, try an interactive6class (LOCAL, REMOTE, or DIALUP). If you are currently:restricted from all login classes, you cannot log in until9you are permitted to use the system. You may also want to=ask your system manager about the login restrictions for youraccount.77 ,eC,1tv>BPWDEXPIR, your password has expired - contact your system managerre6The password is valid for a specific length of time as:determined by your system manager. When a password reaches;the end of its specified time period, it expires and can no=longer be used to gain access to the system. This is a systemLGI_PWD_TMO). This message is written to the system accounting7and security audit records. The user does not receive amessage when this error occurs.None.99 ob1pBNOTMODEM, VAX/VMS host system modem not wired correctly - contact your system managerre>The modem connected to the OpenVMS system is not asserting the=proper signal control. The terminal line is set to /MODEM and>TTDRIVER did not detect all the necessary modem signals within30 seconds of a login attempt.>The system manager should ensure that the following conditionsare met:;o The modem cable connecting the modem provides the correct signal.'o The terminal port supports modem use.7o The modem provides the correct signals in the correct order.system will then read input from the file. However, you cannot:initiate an interactive process while SYS$INPUT is definedbe activated or a network problem prevented the authentication;from completing. Users having the ExtAuth flag set in their=user authorization record are authenticated using an external>authentication service if this service has been enabled on thesystem.8The external authentication image must be installed as a9known shareable image by the system manager. Be sure that;the systemwide, executive-mode logical name SYS$ACME_MODULE;correctly describes the location of this image and that the=image is world readable (W:RE). Refer to the HP OpenVMS Guide9to System Security for more information about configuring'external authentication on your system.== :aZ1km(9CLIFAIL, error activating command interpreter 'CLI-name're:An error occurred while attempting to invoke the specified%command interpreter for your process.=Ensure that the command interpreter image exists and that theimage file has read access.>> 5M/1fh4CLIPROT, error protecting command interpreter pagesre9An error occurred while attempting to protect the commandinterpreter pages..Take action based on the accompanying message.?? aFd1wysECLISYMTBL, error creating space for command interpreter symbol tablere=There is not enough virtual address space available to create%the command interpreter symbol table.:You can increase the amount of available virtual memory by,taking one or more of the following actions:;o Adjust the AUTHORIZE quota PGFLQUO to increase the user's paging file quota.LOGIN cannot access the specified command language interpretertables.=Determine whether the specified tables exist and, if they do,CLITBLPROT, error protecting command interpreter tables pagesreLog in again without specifying the /CLI or /TABLES qualifiersafter your user name.FF 0?1ac/USERAUTH, error accessing authorization recordre8The login processor cannot read the user record for thisuser.Try the operation again later.GG *B|K1su<AUSEREXC, you are at maximum allowed processes for your user namere8No more processes can be logged in under this user name.9The EXQUOTA message simultaneously displays to the systemmanager.:Wait until another process using this user name has loggedout, and retry.HH '1XZ&CMDINPUT, error reading command inputre6An error occurred during the entry of the command; for9example, the timeout period following the prompt for user7name or password expired before a response was entered.Repeat the login procedure.II &{1WY%NOTVALID, user authorization failurere6An incorrect user name, password, or both was entered.:The USERAUTH message simultaneously displays to the systemmanager.Repeat the login procedure.JJ * 4E1eg<3FILEACC, error accessing system authorization filere>An error occurred while attempting to access the authorizationfile.)The system manager should ensure that the=SYS$SYSTEM:SYSUAF.DAT file exists and has system read access.'Then you can retry the login procedure.KK 1KMINVPWD, invalid passwordre6NETUAFACC, error accessing network authorization filere:LOGIN cannot read the SYS$SYSTEM:NETPROXY.DAT network userauthorization file.>Determine whether the file SYS$SYSTEM:NETPROXY.DAT exists and,=if it does, make sure it is not protected against system readaccess.MM P/l1`bb.BADDAY, you are not authorized to login todayre;There are restrictions from the class of login that you are9attempting. The system manager can restrict user use of alogin class on specific days.=If possible, try a different login class. For example, if you:are restricted from BATCH logins today, try an interactiveNOLOCAUTH, not authorized to override external authenticationre:An attempt is being made to bypass external authentication1using the /LOCAL_PASSWORD qualifier during login.5This qualifier requires SYSPRV privilege unless local=authentication has been configured on a systemwide basis. Use=of this qualifier is restricted to users who have the ExtAuthA register name is not the AP, FP, SP, or PC register name, or&it is not in the range R0 through R12."Correct the illegal register name.XX 'D1X^&ADRLSTSYNX, address list syntax erroremblerAn argument to an .ENABLE or .DISABLE directive is not a legaloption.5Delete the option, or replace it with a legal option. 7 #+%1TZ"DIVBYZERO, division by zero errorembler*An expression contains a division by zero.$Change the values in the expression. 7*M-1[a)NOTENUFOPR, not enough operands suppliedembler=The instruction requires more operands than were specified inthe statement.,Add the operands, or change the instruction. = (1KQGENERR, generated ERROR:embler=An .ERROR directive is assembled; 'xxxxx' is the value of the;expression specified in the directive, and 'message' is the text specified in the directive.'Follow the instructions in the message. FA.1_eDX-BADLEXARG, illegal lexical function argumentembler:The argument to a macro string operator is invalid. String>arguments can be macro arguments or strings delimited by angle>brackets or the circumflex delimiters. Symbol arguments can be%absolute symbols or decimal integers.Correct the syntax.  B (1MSGENWRN, generated WARNING:embler;A .WARN directive is assembled; 'xxxxx' is the value of the;expression specified in the directive, and 'message' is the text specified in the directive.'Follow the instructions in the message.  C131bh0BADLEXFORM, illegal format for lexical functionembler2The macro string operator contains a syntax error.Correct the syntax.  G(.1Y_/'MACLBFMTER, macro library format errorembler-A format error occurred in the MACRO library.:Retry the assembly and, if the error still occurs, use the:DCL command LIBRARY (see the HP OpenVMS DCL Dictionary) to+re-create the library from the source code.  J/1`fv.ALIGNXCEED, alignment exceeds PSECT alignmentembler7The .ALIGN directive specifies an alignment larger than6the program section alignment. For example, the .PSECT9directive specifies byte alignment (the default), and the<.ALIGN directive specifies a longword alignment; or a .PSECT)directive specifies an invalid alignment.8Correct the conflicting alignments. The .PSECT directiveThe value of the expression cannot be stored in a longword (324bits). The assembler truncated the value to 32 bits.$Change the values in the expression. ;S-~k1^dM,NOTINANIF, statement outside condition bodyemblerA .NARG, .ENDM, or .ENDR directive is used outside the context of a macro.Correct the code. "X,R1]c4+PSECBUFUND, PSECT context buffer underflowembler;The .RESTORE_PSECT directive attempted to restore a program;section context when the program section context buffer wasempty.:Ensure that each .RESTORE_PSECT directive corresponds to a.SAVE_PSECT directive. Z' 1X^2&PSECOPCNFL, conflicting PSECT optionsembler=The values specified in a .PSECT directive conflict with each=other or are not the same as the values in a preceding .PSECT7directive that specified the same program section name.Correct the conflicting values. f(T>1Y_'NOTLGLISOP, not a legal listing optionemblerThe operator is not an opcode, directive, user-defined opcode,0previously defined macro, or macro in a library.>Change the operator to a valid opcode, directive, or macro; ordefine the macro. ~r!$1RX| OPRNDSYNX, operand syntax errorembler#An operand contains a syntax error.Correct the syntax. u,H81]c+MSGCMAIIF, missing comma in .IIF statementembler1W]%NOTPSECOPT, not a valid PSECT optionembler;The attribute specified in the .PSECT directive is invalid.=Delete the invalid attribute, or replace it with a valid one.!! &;1W]%%UNTERMCOND, unterminated conditionalembler;A conditional assembly block is not terminated by the .ENDCThe destination of a branch instruction is not an address; forexample, BRB 10(R9).:Change the destination of the branch instruction, or use ajump (JMP) instruction...  /1LRILLCHR, illegal characterembler.The source line contains an illegal character.Delete the illegal character.// ' (bx1Y_9'ENDWRNGMAC, statement ends wrong MACROembler=The name in the .ENDM directive is different from the name in#the corresponding .MACRO directive.:Correct the name in the .ENDM directive to ensure that the<.ENDM directive and .MACRO directive correspond as required.00 /5m1`f.TOOMNYOPND, too many operands for instructionembler4Too many operands are specified for the instruction.;Specify fewer operands. Refer to VAX Architecture Reference0Manual for information on operands if necessary.11 &: 1W]%TOOMNYPSEC, too many PSECTs declaredembler9More than 255 user-defined program sections are declared.Declare fewer program sections.22  5y 1fl4ILLDFLTARG, illegal argument for .DEFAULT directiveembler:A .DEFAULT directive does not specify DISPLACEMENT, or the=displacement specified is not either BYTE, WORD, or LONGWORD.Correct the .DEFAULT directive.33  t1NTILLEXPR, illegal expressionembler;A radix unary operator is not followed by a number, or left7and right angle brackets do not match in an expression.Correct the syntax.44  !1RX ILLIFCOND, illegal IF conditionembler:The condition specified in a conditional assembly is not a=valid condition, or there are no symbols after a DIFFERENT orIDENTICAL condition.Correct the syntax.55 - $1U["?#ILLINDXREG, invalid index registerembler>The base mode changed the value of the register, and the index:register is the same as the register in the base mode; the!1HNILLMODE, illegal modeembler=You specified an invalid addressing mode for the instruction. Specify a legal addressing mode.>> L>F1ou^=VQLBADUSE, Vector opcode qualifier not valid for this opcodeembler5The qualifier you used is not valid for the specifiedoperation code.:Enter a valid qualifier. Use this DCL command to display a1list of valid qualifiers for vector instructions:4 $ HELP MACRO VECTOR_INSTRUCTION ASSEMBLER_NOTATION?? #N91TZ"SYMNOTABS, symbol is not absoluteembler/DISK) on a captive account that is logging in. If the account;logging in is a captive account, no qualifiers may be used.$Retry without specifying qualifiers.55 ^ =CA1npAuthorization is needed for the login class you are attempting>from the current source. The login classes are: LOCAL, DIALUP,;REMOTE, NETWORK, and BATCH. The system manager can restrict/your use of each login class at specific times.=If possible, try a different login class. For example, if you>are currently restricted from BATCH logins, try an interactive6class (LOCAL, REMOTE, or DIALUP). If you are currently:restricted from all login classes, you cannot log in until9you are permitted to use the system. You may also want to=ask your system manager about the login restrictions for youraccount.77 ,eC,1tv>BPWDEXPIR, your password has expired - contact your system managerre6The password is valid for a specific length of time as:determined by your system manager. When a password reaches;the end of its specified time period, it expires and can no=longer be used to gain access to the system. This is a systemLGI_PWD_TMO). This message is written to the system accounting7and security audit records. The user does not receive amessage when this error occurs.None.99 ob1pBNOTMODEM, VAX/VMS host system modem not wired correctly - contact your system managerre>The modem connected to the OpenVMS system is not asserting the=proper signal control. The terminal line is set to /MODEM and>TTDRIVER did not detect all the necessary modem signals within30 seconds of a login attempt.>The system manager should ensure that the following conditionsare met:;o The modem cable connecting the modem provides the correct signal.'o The terminal port supports modem use.7o The modem provides the correct signals in the correct order.system will then read input from the file. However, you cannot:initiate an interactive process while SYS$INPUT is definedbe activated or a network problem prevented the authentication;from completing. Users having the ExtAuth flag set in their=user authorization record are authenticated using an external>authentication service if this service has been enabled on thesystem.8The external authentication image must be installed as a9known shareable image by the system manager. Be sure that;the systemwide, executive-mode logical name SYS$ACME_MODULE;correctly describes the location of this image and that the=image is world readable (W:RE). Refer to the HP OpenVMS Guide9to System Security for more information about configuring'external authentication on your system.== :aZ1km(9CLIFAIL, error activating command interpreter 'CLI-name're:An error occurred while attempting to invoke the specified%command interpreter for your process.=Ensure that the command interpreter image exists and that theimage file has read access.>> 5M/1fh4CLIPROT, error protecting command interpreter pagesre9An error occurred while attempting to protect the commandinterpreter pages..Take action based on the accompanying message.?? aFd1wysECLISYMTBL, error creating space for command interpreter symbol tablere=There is not enough virtual address space available to create%the command interpreter symbol table.:You can increase the amount of available virtual memory by,taking one or more of the following actions:;o Adjust the AUTHORIZE quota PGFLQUO to increase the user's paging file quota.LOGIN cannot access the specified command language interpretertables.=Determine whether the specified tables exist and, if they do,CLITBLPROT, error protecting command interpreter tables pagesreLog in again without specifying the /CLI or /TABLES qualifiersafter your user name.FF 0?1ac/USERAUTH, error accessing authorization recordre8The login processor cannot read the user record for thisuser.Try the operation again later.GG *B|K1su<AUSEREXC, you are at maximum allowed processes for your user namere8No more processes can be logged in under this user name.9The EXQUOTA message simultaneously displays to the systemmanager.:Wait until another process using this user name has loggedout, and retry.HH '1XZ&CMDINPUT, error reading command inputre6An error occurred during the entry of the command; for9example, the timeout period following the prompt for user7name or password expired before a response was entered.Repeat the login procedure.II &{1WY%NOTVALID, user authorization failurere6An incorrect user name, password, or both was entered.:The USERAUTH message simultaneously displays to the systemmanager.Repeat the login procedure.JJ * 4E1eg<3FILEACC, error accessing system authorization filere>An error occurred while attempting to access the authorizationfile.)The system manager should ensure that the=SYS$SYSTEM:SYSUAF.DAT file exists and has system read access.'Then you can retry the login procedure.KK 1KMINVPWD, invalid passwordre6NETUAFACC, error accessing network authorization filere:LOGIN cannot read the SYS$SYSTEM:NETPROXY.DAT network userauthorization file.>Determine whether the file SYS$SYSTEM:NETPROXY.DAT exists and,=if it does, make sure it is not protected against system readaccess.MM P/l1`bb.BADDAY, you are not authorized to login todayre;There are restrictions from the class of login that you are9attempting. The system manager can restrict user use of alogin class on specific days.=If possible, try a different login class. For example, if you:are restricted from BATCH logins today, try an interactiveNOLOCAUTH, not authorized to override external authenticationre:An attempt is being made to bypass external authentication1using the /LOCAL_PASSWORD qualifier during login.5This qualifier requires SYSPRV privilege unless local=authentication has been configured on a systemwide basis. Use=of this qualifier is restricted to users who have the ExtAuthA register name is not the AP, FP, SP, or PC register name, or&it is not in the range R0 through R12."Correct the illegal register name.XX 'D1X^&ADRLSTSYNX, address list syntax erroremblerYou entered a DIRECTORY/FOLDER/START=string command, but there>were no folders found alphabetically higher than the specifiedstring.None.V &`1MMNONEWMAIL, no new messagesfile and one or more included files. The process sent the text7of the base DDIF file, but no included files were sent.:Check the base DDIF file and all included files for format>errors. Correct any format errors and ensure that all included,files are available, then retry the command. V yJ ,e1]]+DOTSUNPACK, error unpacking document files prompt.V  9HG1jj8EDITPROC, error creating or executing editor subprocess;You entered a SEND/EDIT command and Mail failed to create a subprocess.=Take action based on the accompanying message and reenter thecommand.V 5N1ff4USERDSABL, user 'user-name' cannot receive new mail=You tried to send mail to a user who has been disallowed fromreceiving mail.None.V 2SI1cc1USERSPEC, invalid user specification 'user-name'>You specified an invalid user name when sending a mail messageto a list of users.=Ensure that your list contains valid user names and retry the operation.V  +W1\\*DELETED, 'compress-file-name.TMP' deletedyou did not specify an addressee on the command line or at the"To: prompt. The file was not sent. 0J1aaP/ERACTED, error activating editor 'editor-name'9Mail cannot activate the editor specified in the last SETEDITOR command.>Enter the SHOW EDITOR command to see which editor is currently7in use. Check with your system manager to make sure the-specified editor is available on your system.V %51VV$NOSUCHUSR, no such user 'user-name'An error occurred when you tried to send mail to the specifieduser..Take action based on the accompanying message.!!V 2=/1cc1UAFGETERR, error reading user authorization fileThe A free queue loopback write failed. The memory channel and;cluster connections were reinitialized for this adapter; nocluster traffic was lost.;If the error occurs more than once in a short time, force aerror. Contact HP Customer Support and describe the conditionsleading to the error.((V o{5~1ff4MC'unit-id' CPU'number': Allocating a TQE from pool.;The memory channel software failed to acquire enough system;resources to allocate a TQE. The memory channel will not be$used in forming cluster connections.8Try rebooting. If the error recurs, force a system crash:using Ctrl/P followed by the CRASH command. Use the BACKUPerror. Contact HP Customer Support and describe the conditionsleading to the error.))V |>~1oo=MC'unit-id' CPU'number': Allocating CRCTX for memory channel.;The memory channel software failed to acquire enough system:resources to allocate the memory channel CRCTX. The memory8channel will not be used in forming cluster connections.8Try rebooting. If the error recurs, force a system crash:using Ctrl/P followed by the CRASH command. Use the BACKUPerror. Contact HP Customer Support and describe the conditionsleading to the error.**V }F~1wwEMC'unit-id' CPU'number': Allocating map registers for memory channel.;The memory channel software failed to acquire enough systemerror. Contact HP Customer Support and describe the conditionsleading to the error.++V ~J~1{{5AMC'unit-id' CPU'number': Allocating system memory for the receive page.;The memory channel software failed to acquire enough system9resources to allocate system memory for the receive page.6The memory channel will not be used in forming cluster connections.8Try rebooting. If the error recurs, force a system crash:using Ctrl/P followed by the CRASH command. Use the BACKUPerror. Contact HP Customer Support and describe the conditionsleading to the error.,,V 8Q1ii7MC'unit-id' CPU'number': Application cleanup timed out.error. Contact HP Customer Support and describe the conditionsleading to the error...V y71hh6MC'unit-id' CPU'number': B-freequeue loopback timeout.>The B free queue loopback write failed. The memory channel and;cluster connections were reinitialized for this adapter; nocluster traffic was lost.;If the error occurs more than once in a short time, force aMC'unit-id' CPU'number': Bad value in PCI base-class register.MC'unit-id' CPU'number': Bad value in PCI class code register.Illegal value in PCI command register. The memory channel will+not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.88V 5mA1ff4MC'unit-id' CPU'number': Bad value in PCI device ID.;Illegal value in PCI device ID register. The memory channel0will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.99V @oA1qq!?MC'unit-id' CPU'number': Bad value in PCI header-type register.=Illegal value in PCI header-type register. The memory channel0will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.::V BqA1ss%AMC'unit-id' CPU'number': Bad value in PCI interrupt pin register.7Illegal value in PCI interrupt pin register. The memory8channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.;;V DsA1uu)CMC'unit-id' CPU'number': Bad value in PCI maximum latency register.9Illegal value in PCI maximum latency register. The memory8channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.<<V 2jA1cc1MC'unit-id' CPU'number': Bad value in PCI MCTBAR.=Illegal value in PCI MCTBAR register. The memory channel will+not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.==V BqA1ss%AMC'unit-id' CPU'number': Bad value in PCI minimum grant register.7Illegal value in PCI minimum grant register. The memory8channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.>>V ;mA1ll:MC'unit-id' CPU'number': Bad value in PCI status register.;Illegal value in PCI vendor ID register. The memory channel0will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.??V >mA1oo=MC'unit-id' CPU'number': Bad value in PCI sub-class register.;Illegal value in PCI sub-class register. The memory channel0will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.@@V 5mA1ff4MC'unit-id' CPU'number': Bad value in PCI vendor ID.;Illegal value in PCI vendor ID register. The memory channel0will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.AAV ;sA1ll :MC'unit-id' CPU'number': Bad value in memory channel LCSR.9Illegal value in memory channel LCSR register. The memory8channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.BBV <tA1mm";MC'unit-id' CPU'number': Bad value in memory channel PRBAR.:Illegal value in memory channel PRBAR register. The memory8channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.CCV 1mA1bb0MC'unit-id' CPU'number': Bad value in vendor ID.;Illegal value in PCI vendor ID register. The memory channel0will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.DDV @k1qq?MC'unit-id' CPU'number': BAFree que empty during CHAN CREATION.:The BAFree queue was empty when trying to create a message/channel for a new priority. The system crashed.=Use the BACKUP command with the /IGNORE=NOBACKUP qualifier to=make a backup save set including the system dump file and the;console log file and error log file that were active at the;time of the error. Contact HP Customer Support and describe$the conditions leading to the error.EEV 7X1hh6MC'unit-id' CPU'number': BAFree que empty during init.:The BAFree queue was empty when trying to create a messagechannel. The system crashed.=Use the BACKUP command with the /IGNORE=NOBACKUP qualifier to=make a backup save set including the system dump file and the;console log file and error log file that were active at the;time of the error. Contact HP Customer Support and describe$the conditions leading to the error.FFV N1SCMC'unit-id' CPU'number': Can't re-request community state, no nodes are up.>The memory channel could not join the memory channel community>because other nodes became unavailable. The memory channel and;cluster connections were reinitialized for this adapter; nocluster traffic was lost.;If the error occurs more than once in a short time, force aThe memory channel could not join the memory channel community>because other nodes became unavailable. The memory channel and;cluster connections were reinitialized for this adapter; nocluster traffic was lost.;If the error occurs more than once in a short time, force amemory channel management lock. The memory channel and cluster:connections were reinitialized for all nodes in the memory/channel community; no cluster traffic was lost.;If the error occurs more than once in a short time, force aMemory channel software failed while trying to send an "updateerror. Contact HP Customer Support and describe the conditionsleading to the error.RRV oI~1zzerror. Contact HP Customer Support and describe the conditionsleading to the error.SSV E1vvPDMC'unit-id' CPU'number': Duplicate COMM_STATE_COMPLETE int received.>The memory channel could not join the memory channel community8because other nodes sent conflicting signals. The memory;channel and cluster connections were reinitialized for this%adapter; no cluster traffic was lost.;If the error occurs more than once in a short time, force a~1ooz=MC'unit-id' CPU'number': Enabling interrupts through the ADP.7The memory channel software failed to enable interrupts7through the ADP. The memory channel will not be used informing cluster connections.8Try rebooting. If the error recurs, force a system crash:using Ctrl/P followed by the CRASH command. Use the BACKUPerror. Contact HP Customer Support and describe the conditionsleading to the error.UUV A1rro@MC'unit-id' CPU'number': Error during builder update of channels=The memory channel software failed while trying to update the>shared channels management memory in a node joining the memory=channel community. The memory channel and cluster connections;were reinitialized for this adapter; no cluster traffic waslost.;If the error occurs more than once in a short time, force a1ooi=MC'unit-id' CPU'number': Error during builder update of locks=The memory channel software failed while trying to update the;shared locks management memory in a node joining the memory=channel community. The memory channel and cluster connections;were reinitialized for this adapter; no cluster traffic waslost.;If the error occurs more than once in a short time, force aThe memory channel could not join the memory channel community>because other nodes became unavailable. The memory channel and;cluster connections were reinitialized for this adapter; nocluster traffic was lost.;If the error occurs more than once in a short time, force ac1oo=MC'unit-id' CPU'number': Error in Update AB Headers Channels.c1oo=MC'unit-id' CPU'number': Error in Update BA Headers Channels.Memory channel software failed while trying to set PCT entries:for lock pages. The memory channel and cluster connections;were reinitialized for this adapter; no cluster traffic waslost.;If the error occurs more than once in a short time, force aMC'unit-id' CPU'number': Hub Timeout detected - reinitializing adapter.8The memory channel hub timed out. The memory channel and;cluster connections were reinitialized for this adapter; nocluster traffic was lost.;If the error occurs more than once in a short time, force aImproper alignment of memory channel PCI addresses. The memory8channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport. U@A1qq&g?MC'unit-id' CPU'number': Init retries exceeded, going off-line.=This node could not join the memory channel community because=of incorrect behavior in the hardware or software. The memory8channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport. C1tt4BMC'unit-id' CPU'number': Initialization error after joiner update.8An error occurred during this node's attempt to join the8memory channel community. The memory channel and cluster;connections were reinitialized for this adapter; no clustertraffic was lost.;If the error occurs more than once in a short time, force aMC'unit-id' CPU'number': interrupt facility incorrectly sized.=The shared interrupt management memory could not be correctly=sized. The memory channel will not be used in forming cluster connections.8Try rebooting. If the error recurs, force a system crash:using Ctrl/P followed by the CRASH command. Use the BACKUPerror. Contact HP Customer Support and describe the conditionsleading to the error. 8~1ii7MC'unit-id' CPU'number': Insufficient memory for locks.9Memory channel software was unable to allocate sufficient:memory for the memory channel management locks. The systemcrashed.=Use the BACKUP command with the /IGNORE=NOBACKUP qualifier to=make a backup save set including the system dump file and the;console log file and error log file that were active at the;time of the error. Contact HP Customer Support and describe$the conditions leading to the error. -N1^^,MC'unit-id' CPU'number': Invalid lock state.=A memory channel management lock was in an invalid state. Thesystem crashed.=Use the BACKUP command with the /IGNORE=NOBACKUP qualifier to=make a backup save set including the system dump file and the;console log file and error log file that were active at the;time of the error. Contact HP Customer Support and describe$the conditions leading to the error. ;1ll3:MC'unit-id' CPU'number': Joiner can't find mgmt locks tag.:A node trying to join a memory channel community could not=find the management locks tag. The memory channel and cluster;connections were reinitialized for this adapter; no clustertraffic was lost.;If the error occurs more than once in a short time, force aerror. Contact HP Customer Support and describe the conditionsleading to the error. zP~1BMC'unit-id' CPU'number': Loading memory channel scatter/gather map registers.9The memory channel software failed to load scatter/gather=map registers. The memory channel will not be used in formingcluster connections.8Try rebooting. If the error recurs, force a system crash:using Ctrl/P followed by the CRASH command. Use the BACKUPerror. Contact HP Customer Support and describe the conditionsleading to the error. .1__-MC'unit-id' CPU'number': Lock DB copy failed.:An error occurred during a copy of the locks database. The=memory channel and cluster connections were reinitialized for*this adapter; no cluster traffic was lost.;If the error occurs more than once in a short time, force amemory channel lock; the required loopback did not complete in=a reasonable time. The memory channel and cluster connections;were reinitialized for this adapter; no cluster traffic waslost.;If the error occurs more than once in a short time, force aerror. Contact HP Customer Support and describe the conditionsleading to the error. JPA1\=MC'unit-id' CPU'number': Memory channel hardware error during initialization.MC'unit-id' CPU'number': Memory channel link online failure 1.;Memory channel link online failure. The memory channel will+not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport. ?hA1pp>MC'unit-id' CPU'number': Memory channel link online failure 2.;Memory channel link online failure. The memory channel will+not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport. ?hA1pp>MC'unit-id' CPU'number': Memory channel link online failure 3.;Memory channel link online failure. The memory channel will+not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport. ?hA1pp>MC'unit-id' CPU'number': Memory channel link online failure 4.;Memory channel link online failure. The memory channel will+not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport. -P}A1?EMC'unit-id' CPU'number': Memory channel loopback write interrupt test failed.8The memory channel loopback write interrupt test failed.6The memory channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport. DsA1uu)CMC'unit-id' CPU'number': Memory channel loopback write test failed.9The memory channel loopback write test failed. The memory8channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport. CIA1zzUAMC'unit-id' CPU'number': Memory channel real slave but adapter_OK off.MA1~~PAMC'unit-id' CPU'number': Memory channel real slave but thinks its virtual.=The memory channel adapter is of type real slave, but behaves=as if virtual. The memory channel will not be used in formingcluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.## IBA1ss[AMC'unit-id' CPU'number': Memory channel real slave inconsistency.>The memory channel adapter behaves inconsistently with respect;to its apparent type of real slave. The memory channel will+not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.$$ "><1oo4=MC'unit-id' CPU'number': Memory channel unsupported hub type.8This revision of the memory channel hub is not supported:by OpenVMS. The memory channel will not be used in formingcluster connections.;Ask HP Customer Support to replace your memory channel hub.%% =A1nn0The memory channel hub is a virtual hub, and adapter_OK should9be on, but is off. The memory channel will not be used informing cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.'' 6DA1uuHCMC'unit-id' CPU'number': Memory channel virtual hub but hub_OK off.=The memory channel hub is a virtual hub, and hub_OK should be>on, but is off. The memory channel will not be used in formingcluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.(( GFA1wwYEMC'unit-id' CPU'number': Memory channel virtual hub but node ID != 0.;The memory channel adapter is a virtual hub master, and itsThe memory channel adapter is a virtual hub master, and hub_ok=should be on, but is off. The memory channel will not be usedin forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.** NPA1`BMC'unit-id' CPU'number': Memory channel virtual hub master but hub type != 0.;The memory channel adapter is a virtual hub master, and hubThe memory channel adapter is a virtual hub slave, and its hubmemory channel management lock. The memory channel and cluster:connections were reinitialized for all nodes in the memory/channel community; no cluster traffic was lost.;If the error occurs more than once in a short time, force aThe memory channel could not join the memory channel community>because other nodes became unavailable. The memory channel and;cluster connections were reinitialized for this adapter; nocluster traffic was lost.;If the error occurs more than once in a short time, force amemory channel management lock. The memory channel and cluster:connections were reinitialized for all nodes in the memory/channel community; no cluster traffic was lost.;If the error occurs more than once in a short time, force aAn error occurred while reading memory channel MCERR register.6The memory channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.55 8A1ii.7MC'unit-id' CPU'number': Reading memory channel MCPORT.5An error occurred while reading memory channel MCPORT8register. The memory channel will not be used in formingcluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.66 7A1hh,6MC'unit-id' CPU'number': Reading memory channel PRBAR.>An error occurred while reading memory channel PRBAR register.6The memory channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.77 :}A1kk)9MC'unit-id' CPU'number': Reading PIC interrupts register.8An error occurred while reading PCI interrupts register.6The memory channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.88 :}A1kk)9MC'unit-id' CPU'number': Reading PCI class code register.8An error occurred while reading PCI class code register.6The memory channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.99 0|A1aa/MC'unit-id' CPU'number': Reading PCI device ID.7An error occurred while reading PCI device ID register.6The memory channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.:: 9|A1jj'8MC'unit-id' CPU'number': Reading PCI device ID register.7An error occurred while reading PCI device ID register.6The memory channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.;; :}A1kk)9MC'unit-id' CPU'number': Reading PCI interrupts register.8An error occurred while reading PCI interrupts register.6The memory channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.<< =A1nn/> 'BA1ss9AMC'unit-id' CPU'number': Reading PCI status and control register.6An error occurred while reading PCI status and control8register. The memory channel will not be used in formingcluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.?? 91jjQ8MC'unit-id' CPU'number': Release mgmt lock busy timeout.8Memory channel software timed out trying to get a memory:channel management lock's busy bit. The memory channel and;cluster connections were reinitialized for all nodes in the6memory channel community; no cluster traffic was lost.;If the error occurs more than once in a short time, force a~1oo =MC'unit-id' CPU'number': Removing a TQE from the timer queue.;The memory channel software failed while trying to remove a=TQE from the timer queue. The memory channel will not be usedin forming cluster connections.8Try rebooting. If the error recurs, force a system crash:using Ctrl/P followed by the CRASH command. Use the BACKUPerror. Contact HP Customer Support and describe the conditionsleading to the error.AA L1}}Q>MC'unit-id' CPU'number': Timed out waiting for joiner update - reiniting.>The memory channel could not join the memory channel community>because other nodes became unavailable. The memory channel and;cluster connections were reinitialized for this adapter; nocluster traffic was lost.;If the error occurs more than once in a short time, force aerror. Contact HP Customer Support and describe the conditionsleading to the error.EE 7C1hh6MC'unit-id' CPU'number': Unknown channel block status.9A Channel Block had an unknown channel status. The systemcrashed.=Use the BACKUP command with the /IGNORE=NOBACKUP qualifier to=make a backup save set including the system dump file and the;console log file and error log file that were active at the;time of the error. Contact HP Customer Support and describe$the conditions leading to the error.FF BXA1T?MC'unit-id' CPU'number': unsupported base address alignment for memory channel board.8The base address alignment in the PCI MCTBAR register is;unsupported. The memory channel will not be used in formingcluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.GG 6D@1uuHCMC'unit-id' CPU'number': Unsupported memory channel board revision.8This revision of the memory channel adapter board is not9supported by OpenVMS. The memory channel will not be usedin forming cluster connections.6Ask HP Customer Support to replace your memory channeladapter.HH -AA1rr?@MC'unit-id' CPU'number': Waiting for memory channel to be reset.=The memory channel software timed out waiting for the adapter8to reset. The memory channel will not be used in formingcluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.t an .END directive.of license types or options.0A different PAK is needed, one that LMF can use.t.   MC, MEMORY CHANNEL/E1``.MC'unit-id' CPU'number': We shouldn't be here.;The memory channel software behaved incorrectly. The systemcrashed.=Use the BACKUP command with the /IGNORE=NOBACKUP qualifier to=make a backup save set including the system dump file and the;console log file and error log file that were active at the;time of the error. Contact HP Customer Support and describe$the conditions leading to the error. IP1zz?MC'unit-id' CPU'number': Work queue stopper is not in the right state.;A channel work queue stopper was not "empty" or "received".The system crashed.=Use the BACKUP command with the /IGNORE=NOBACKUP qualifier to=make a backup save set including the system dump file and the;console log file and error log file that were active at the;time of the error. Contact HP Customer Support and describe$the conditions leading to the error. 6A1gg.5MC'unit-id' CPU'number': Writing memory channel LCSR.7An error occurred while writing the memory channel LCSR8register. The memory channel will not be used in formingcluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport. 7A1hh,6MC'unit-id' CPU'number': Writing memory channel PRBAR.>An error occurred while writing memory channel PRBAR register.6The memory channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport. {P~1BMC'unit-id' CPU'number': Writing memory channel scatter/gather map registers.:The memory channel software failed to write scatter/gather=map registers. The memory channel will not be used in formingcluster connections.8Try rebooting. If the error recurs, force a system crash:using Ctrl/P followed by the CRASH command. Use the BACKUPerror. Contact HP Customer Support and describe the conditionsleading to the error. -nA1^^ ,MC'unit-id' CPU'number': Writing PCI MCTBAR.c1oo=MC'unit-id' CPU'number': Error in Update AB Headers Channels.c1oo=MC'unit-id' CPU'number': Error in Update BA Headers Channels.Memory channel software failed while trying to set PCT entries:for lock pages. The memory channel and cluster connections;were reinitialized for this adapter; no cluster traffic waslost.;If the error occurs more than once in a short time, force aMC'unit-id' CPU'number': Hub Timeout detected - reinitializing adapter.8The memory channel hub timed out. The memory channel and;cluster connections were reinitialized for this adapter; nocluster traffic was lost.;If the error occurs more than once in a short time, force aImproper alignment of memory channel PCI addresses. The memory8channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport. U@A1qq&g?MC'unit-id' CPU'number': Init retries exceeded, going off-line.=This node could not join the memory channel community because=of incorrect behavior in the hardware or software. The memory8channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport. C1tt4BMC'unit-id' CPU'number': Initialization error after joiner update.8An error occurred during this node's attempt to join the8memory channel community. The memory channel and cluster;connections were reinitialized for this adapter; no clustertraffic was lost.;If the error occurs more than once in a short time, force aMC'unit-id' CPU'number': interrupt facility incorrectly sized.=The shared interrupt management memory could not be correctly=sized. The memory channel will not be used in forming cluster connections.8Try rebooting. If the error recurs, force a system crash:using Ctrl/P followed by the CRASH command. Use the BACKUPerror. Contact HP Customer Support and describe the conditionsleading to the error. 8~1ii7MC'unit-id' CPU'number': Insufficient memory for locks.9Memory channel software was unable to allocate sufficient:memory for the memory channel management locks. The systemcrashed.=Use the BACKUP command with the /IGNORE=NOBACKUP qualifier to=make a backup save set including the system dump file and the;console log file and error log file that were active at the;time of the error. Contact HP Customer Support and describe$the conditions leading to the error. -N1^^,MC'unit-id' CPU'number': Invalid lock state.=A memory channel management lock was in an invalid state. Thesystem crashed.=Use the BACKUP command with the /IGNORE=NOBACKUP qualifier to=make a backup save set including the system dump file and the;console log file and error log file that were active at the;time of the error. Contact HP Customer Support and describe$the conditions leading to the error. ;1ll3:MC'unit-id' CPU'number': Joiner can't find mgmt locks tag.:A node trying to join a memory channel community could not=find the management locks tag. The memory channel and cluster;connections were reinitialized for this adapter; no clustertraffic was lost.;If the error occurs more than once in a short time, force aerror. Contact HP Customer Support and describe the conditionsleading to the error. zP~1BMC'unit-id' CPU'number': Loading memory channel scatter/gather map registers.9The memory channel software failed to load scatter/gather=map registers. The memory channel will not be used in formingcluster connections.8Try rebooting. If the error recurs, force a system crash:using Ctrl/P followed by the CRASH command. Use the BACKUPerror. Contact HP Customer Support and describe the conditionsleading to the error. .1__-MC'unit-id' CPU'number': Lock DB copy failed.:An error occurred during a copy of the locks database. The=memory channel and cluster connections were reinitialized for*this adapter; no cluster traffic was lost.;If the error occurs more than once in a short time, force amemory channel lock; the required loopback did not complete in=a reasonable time. The memory channel and cluster connections;were reinitialized for this adapter; no cluster traffic waslost.;If the error occurs more than once in a short time, force aerror. Contact HP Customer Support and describe the conditionsleading to the error. JPA1\=MC'unit-id' CPU'number': Memory channel hardware error during initialization.MC'unit-id' CPU'number': Memory channel link online failure 1.;Memory channel link online failure. The memory channel will+not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport. ?hA1pp>MC'unit-id' CPU'number': Memory channel link online failure 2.;Memory channel link online failure. The memory channel will+not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport. ?hA1pp>MC'unit-id' CPU'number': Memory channel link online failure 3.;Memory channel link online failure. The memory channel will+not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport. ?hA1pp>MC'unit-id' CPU'number': Memory channel link online failure 4.;Memory channel link online failure. The memory channel will+not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport. -P}A1?EMC'unit-id' CPU'number': Memory channel loopback write interrupt test failed.8The memory channel loopback write interrupt test failed.6The memory channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport. DsA1uu)CMC'unit-id' CPU'number': Memory channel loopback write test failed.9The memory channel loopback write test failed. The memory8channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport. CIA1zzUAMC'unit-id' CPU'number': Memory channel real slave but adapter_OK off.MA1~~PAMC'unit-id' CPU'number': Memory channel real slave but thinks its virtual.=The memory channel adapter is of type real slave, but behaves=as if virtual. The memory channel will not be used in formingcluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.## IBA1ss[AMC'unit-id' CPU'number': Memory channel real slave inconsistency.>The memory channel adapter behaves inconsistently with respect;to its apparent type of real slave. The memory channel will+not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.$$ "><1oo4=MC'unit-id' CPU'number': Memory channel unsupported hub type.8This revision of the memory channel hub is not supported:by OpenVMS. The memory channel will not be used in formingcluster connections.;Ask HP Customer Support to replace your memory channel hub.%% =A1nn0The memory channel hub is a virtual hub, and adapter_OK should9be on, but is off. The memory channel will not be used informing cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.'' 6DA1uuHCMC'unit-id' CPU'number': Memory channel virtual hub but hub_OK off.=The memory channel hub is a virtual hub, and hub_OK should be>on, but is off. The memory channel will not be used in formingcluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.(( GFA1wwYEMC'unit-id' CPU'number': Memory channel virtual hub but node ID != 0.;The memory channel adapter is a virtual hub master, and itsThe memory channel adapter is a virtual hub master, and hub_ok=should be on, but is off. The memory channel will not be usedin forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.** NPA1`BMC'unit-id' CPU'number': Memory channel virtual hub master but hub type != 0.;The memory channel adapter is a virtual hub master, and hubThe memory channel adapter is a virtual hub slave, and its hubmemory channel management lock. The memory channel and cluster:connections were reinitialized for all nodes in the memory/channel community; no cluster traffic was lost.;If the error occurs more than once in a short time, force aThe memory channel could not join the memory channel community>because other nodes became unavailable. The memory channel and;cluster connections were reinitialized for this adapter; nocluster traffic was lost.;If the error occurs more than once in a short time, force amemory channel management lock. The memory channel and cluster:connections were reinitialized for all nodes in the memory/channel community; no cluster traffic was lost.;If the error occurs more than once in a short time, force aAn error occurred while reading memory channel MCERR register.6The memory channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.55 8A1ii.7MC'unit-id' CPU'number': Reading memory channel MCPORT.5An error occurred while reading memory channel MCPORT8register. The memory channel will not be used in formingcluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.66 7A1hh,6MC'unit-id' CPU'number': Reading memory channel PRBAR.>An error occurred while reading memory channel PRBAR register.6The memory channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.77 :}A1kk)9MC'unit-id' CPU'number': Reading PIC interrupts register.8An error occurred while reading PCI interrupts register.6The memory channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.88 :}A1kk)9MC'unit-id' CPU'number': Reading PCI class code register.8An error occurred while reading PCI class code register.6The memory channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.99 0|A1aa/MC'unit-id' CPU'number': Reading PCI device ID.7An error occurred while reading PCI device ID register.6The memory channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.:: 9|A1jj'8MC'unit-id' CPU'number': Reading PCI device ID register.7An error occurred while reading PCI device ID register.6The memory channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.;; :}A1kk)9MC'unit-id' CPU'number': Reading PCI interrupts register.8An error occurred while reading PCI interrupts register.6The memory channel will not be used in forming cluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.<< =A1nn/> 'BA1ss9AMC'unit-id' CPU'number': Reading PCI status and control register.6An error occurred while reading PCI status and control8register. The memory channel will not be used in formingcluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.?? 91jjQ8MC'unit-id' CPU'number': Release mgmt lock busy timeout.8Memory channel software timed out trying to get a memory:channel management lock's busy bit. The memory channel and;cluster connections were reinitialized for all nodes in the6memory channel community; no cluster traffic was lost.;If the error occurs more than once in a short time, force a~1oo =MC'unit-id' CPU'number': Removing a TQE from the timer queue.;The memory channel software failed while trying to remove a=TQE from the timer queue. The memory channel will not be usedin forming cluster connections.8Try rebooting. If the error recurs, force a system crash:using Ctrl/P followed by the CRASH command. Use the BACKUPerror. Contact HP Customer Support and describe the conditionsleading to the error.AA L1}}Q>MC'unit-id' CPU'number': Timed out waiting for joiner update - reiniting.>The memory channel could not join the memory channel community>because other nodes became unavailable. The memory channel and;cluster connections were reinitialized for this adapter; nocluster traffic was lost.;If the error occurs more than once in a short time, force aerror. Contact HP Customer Support and describe the conditionsleading to the error.EE 7C1hh6MC'unit-id' CPU'number': Unknown channel block status.9A Channel Block had an unknown channel status. The systemcrashed.=Use the BACKUP command with the /IGNORE=NOBACKUP qualifier to=make a backup save set including the system dump file and the;console log file and error log file that were active at the;time of the error. Contact HP Customer Support and describe$the conditions leading to the error.FF BXA1T?MC'unit-id' CPU'number': unsupported base address alignment for memory channel board.8The base address alignment in the PCI MCTBAR register is;unsupported. The memory channel will not be used in formingcluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.GG 6D@1uuHCMC'unit-id' CPU'number': Unsupported memory channel board revision.8This revision of the memory channel adapter board is not9supported by OpenVMS. The memory channel will not be usedin forming cluster connections.6Ask HP Customer Support to replace your memory channeladapter.HH -AA1rr?@MC'unit-id' CPU'number': Waiting for memory channel to be reset.=The memory channel software timed out waiting for the adapter8to reset. The memory channel will not be used in formingcluster connections.7Try rebooting. If the error recurs, contact HP CustomerSupport.t an .END directive.of license types or options.0A different PAK is needed, one that LMF can use.t. }YR  MESSAGE, Message Uti!51RV SYMTOOLNG, symbol name too longlity4A symbol name was assigned with too many characters.Shorten the symbol name. :P1NRNOMSGS, no messages definedlity9No messages have been defined in the message source file.:Ensure that at least one message definition appears in themessage source file. !2d;1cg1SHARCONF, /SHARED conflicts with facility numberlity>The /SHARED qualifier was specified on the facility definition$with a facility number other than 0.:Remove the /SHARED qualifier from the facility definition. s `01>FACOVFL, facility table overflow in section; contact a Compaq support representativelity/An internal error was detected in the compiler.Contact HP Customer Support.  `01DINDEXOVFL, index area overflow in section; contact a Compaq support representativelity/An internal error in the compiler was detected.Contact HP Customer Support.  ]51BDATAOVFL, data area overflow in section; contact a Compaq support representativelity4An internal error has been detected in the compiler.Contact HP Customer Support.  4HX1ei 3DUPMSG, message code 'nn' already assigned as 'ss'lity7The same message code (nn) is assigned to more than onemessage symbol.;Reenter the message definitions; assign a different messagesymbol to one message code. % %=1VZ7$DUPSYM, duplicate symbol definitionlity;The same symbol is assigned to two values. This message mayThe same facility name or facility number is specified for twodifferent facilities.;Reenter the facility definitions so that each facility name#corresponds to one facility number.  ?IME, MIME Utility &b1WW?%BADFILENAM, invalid output file name=The file cannot be opened. Either the file name was specifiedthat precede valid MIME or RFC822 headers, such as From:, To:,Subject:, and so forth. b#+t1\\t*BADMAILCAP, invalid entry in Mailcap file>An entry in the MIME$MAILCAP.DAT file is invalid and may causeA valid MIME$MAILCAP.DAT entry must include at least the first;two required (RFC 1524) fields, separated by a semicolon. A;second semicolon is required if more options are specified. For example: #3 # content-type ; view command [; options] # image/jpg; "XVIEW %s"4Enter HELP SHOW CONTENT at the MIME> prompt for more information. $/E)1``.BADNAMBLK, Fatal program error: bad NAM block>Internal MIME failure. No reference to NAMBLK was given in thecall.(Report the error to HP Customer Support. o%,81]]+CANTALLMEM, cannot allocate dynamic memory7There is not enough memory to open the MIME attachment.Exit the application, edit the MIME$MAILCAP.DAT file, and thenretry the operation. s*(&1YY'CANTOPNTMP, cannot open temporary file%A fatal, internal error has occurred.None. o+$&1UU{#CANTRDINPF, cannot read input file%A fatal, internal error has occurred.None. m,"&1SSy!CANTRDTMPF, cannot read tmp file%A fatal, internal error has occurred.None. t-)&1ZZ(CANTWRITMP, cannot write temporary file%A fatal, internal error has occurred.None. .;1ll"(:DBL_ERROR, Fatal double error: 'error-code', 'error-code'6Two consecutive fatal errors occurred. Either an errorwhile attempting a conv$pass_options operation to pass CONVERT+option flags during a MIME EXTRACT command.None."" 6%8X1VV$FILEERROR, File error: 'error-code';Either a file name was specified incorrectly or there was anumber, letter, hyphen, underscore, or dollar sign are changedto an underscore character.None.$$ 81CW1bb0FIRSTPART, cannot remove the first message part9An attempt was made to remove the first or only part of amessage.>If there are any parts left to be removed, specify the correctmessage part to remove.%% 9?1pp&,>INITERROR, Fatal initialization error; Status = 'status-code'8A fatal error occurred in a basic initialization routine7while attempting to initialize the display screen, read=MAIL defaults, or read MIME$FILETYPES.DAT or MIME$MAILCAP.DATfiles.None.&& :@1qq ?INVMSG822, ignoring invalid content encoding on message/rfc822=Encoding is specified for a Content-Type of 'message/RFC822.'Encoding is specified for a Content-Type of 'message/partial'.83A1ii7INVNUMPRT, partial message has invalid number of parts:A partial message has been decoded but the total number of:parts is incorrect. Partial messages are parts of a larger9message that has been broken into parts for transmission.:Each partial message must have a corresponding part number>and an indicator of the total number of parts for the completemessage.2The message is improperly formatted or was decoded5incorrectly. Edit the message and look for extraneous=forwarding message headers that need to be removed. The first;blank line must appear after the MIME version and followingA partial message has been decoded but the current part numberhave a corresponding part number and an indicator of the total;number of parts for the complete message. The message parts*are tallied when the messages are decoded.2The message is improperly formatted or was decoded5incorrectly. Edit the message and look for extraneous=forwarding message headers that need to be removed. The first;blank line must appear after the MIME version and following>the headers. Also note the message number and the total number9of parts. When the message has been cleaned up, retry the operation with the MIME utility.,, x@0Y1aa/MD5CORUPT, 'filename' was corrupted in transit9The decoded MD5 message digest or its "signature" did notmatch the embedded MD5 digest.=The message format may be corrupt. Edit the message to remove>any extraneous headers and then retry the operation. Note that;the first blank line must appear after the MIME version andfollowing the headers.-- A/)?1``.MSGFILOPN, another message file is still open(Another MIME message file is still open.>Close the currently open message and then retry the operation... B+1\\*NOATTCHNUM, attachment number is required LIST> MIME> EXTRACT/ATTACHMENT=1 ! extracts the first attachment// SC(o1YYe'NOATTFILE, cannot find attachment file;The specified attachment file for the ADD command cannot be=opened. Either the file name was incorrectly specified or the"file resides in another directory.;Try specifying the disk, directory, and filename.extension. For example:$ MIME> ADD $4$DKA100:[user]my.jpg00 D81ii&-7NOBOUNDRY, multipart message has no boundary parameter>A message was decoded that does not have a boundary parameter.8Multiple part messages must define a boundary parameter,:which is typically an alphanumeric marker used to separate>the multiple parts of the message. A Content-Type of multipart;was decoded, which specifies that a boundary parameter mustfollow. For example: MIME-Version: 1.0" Content-Type: multipart/mixed;? boundary="----=_NextPart_000_0018_01BF92AF.82A44900"8The message may have been decoded incorrectly because of>extraneous forwarding MAIL headers. Edit the message to remove;any extraneous headers; then retry the operation. Note that;the first blank line must appear after the MIME version andfollowing the headers.11 [E)91ZZ4m(NOEXTRACT, attachment was not extracted=An attachment of the message could not be extracted because a=file name was specified incorrectly. The file name was either:embedded in the message, specified in the command line, or"specified in response to a prompt.8Retry the extract command with or without the file name.22 SFDl1uueCNOFILETYPE, entry in FILETYPES.DAT does not specify a Content-Typefile Content-Type or subtype that was incorrectly specified inthe MIME$FILETYPES.DAT file.=The default MIME$FILETYPES.DAT file format is a simple comma-separated list, as follows:< # '#' is a comment delimiter (spaces and tabs are ignored) #3 #Extension: Content-Type/subtype: Encoding:3 #---------- --------------------- ---------0 jpg, image/jpg, Base640 jpeg, image/jpeg, Base64=The subtype immediately follows the Content-type, and the two-types are separated by a slash (/) character.temporarily overridden with command line qualifiers to the ADDcommand.*Edit the SYS$MANAGER:MIME$FILETYPES.DAT or=SYS$LOGIN:MIME$FILETYPES.DAT file, as appropriate, to correctthe subtype specification.33 GZv1aENOFILEXTEN, entry in FILETYPES.DAT does not specify a file extension string:A file format error was detected during an attempt to read6a file extension that was incorrectly specified in theMIME$FILETYPES.DAT file.=The default MIME$FILETYPES.DAT file format is a simple comma-separated list, as follows:< # '#' is a comment delimiter (spaces and tabs are ignored) #3 #Extension: Content-Type/subtype: Encoding:3 #---------- --------------------- ---------0 jpg, image/jpg, Base640 jpeg, image/jpeg, Base64>The file extension, Content-Type, subtype, and encoding scheme9are the default settings when an attachment is added to a=MIME message. These values can be temporarily overridden with+command line qualifiers to the ADD command.*Edit the SYS$MANAGER:MIME$FILETYPES.DAT or=SYS$LOGIN:MIME$FILETYPES.DAT file, as appropriate, to correct the problem.44 G'Cd1XX&BADQUOTE, quoted string not specified:The value specified for the /EDIT qualifer is not a quotedstring.:Reenter the command and include quotation marks around the(value specified for the /EDIT qualifier.55 H(t-1YY'NOFILNAME, file name must be specified>A file name was requested and expected but either no file name4was specified or the specified file name is invalid.,Retry the operation using a valid file name.66 I>_1oo=NOMAILDIR, cannot create temporary file(s) in mail directory9A directory and file specification does not exist, so the$partial message could not be stored.:If all of the following conditions are true, please report+this internal error to HP Customer Support:&o A MAIL profile exists for this user.that has been broken into parts for transmission. Each partial message must have a part number.2The message is improperly formatted or was decoded=incorrectly. Edit the message to remove extraneous forwarding;message headers. The first blank line must appear after themessage that has been broken into parts for transmission. Each5partial message must have a corresponding message ID.2The message is improperly formatted or was decoded6incorrectly. Edit the message to remove any extraneousmessage has been cleaned up, retry the operation with the MIMEutility.:: 'M6dn1gg95NOSUCHPRT, the specified message part does not exist=The attachment or a message part could not be located for the%EDIT, EXTRACT, or the REMOVE command.=Respecify the correct attachment number. Use the LIST command/to display the message part attachment numbers.;; 4N831iiF7NOTRFC822, message format does not comply with RFC 822=The message could not be properly decoded. For a MIME message:to be decoded, it must consist of MIME headers followed by=at least one blank line prior to the body of the message. Forexample:/ From: "Adams, Charles" ) To: 'Paul' 9 Subject: FW: I want you to see the following picture...& Date: Tue, 5 Feb 2002 11:07:10 -0400 MIME-Version: 1.0. X-Mailer: Internet Mail Service (5.5.1960.3) Content-Type: multipart/mixed;: boundary="---- =_NextPart_000_01C02D4B.9EB62140"A This message is in MIME format. Since your mail reader does not@ understand this format, some or all of this message may not be legible.>Check whether the message is in MIME message format. If it is,>it may have extraneous forwarding mail headers that need to be=removed by editing the message. Remove any unneccessary lines> Q(KS1YY'READONLY, current message is read-onlyFor write-access to a MIME message, use the OPEN/DRAFT commandor the NEW command.?? R'g1XX&SAVEFILE, saving file . . .'filename' ADD /CONTENT_TYPE="application/xls";If this error occurs on an ADD operation, check whether the>entry in MIME$FILETYPES.DAT file is correct. For READ and EDIT7operations, check entries in the MIME$MAILCAP.DAT file.:There are seven basic types and subtypes registered: text,=multipart, message, application, image, audio, and video. New:types are actively being registered with Internet Assigned=Numbers Authority (IANA). However, sometimes the new types or;subtypes are alternatively specified in the actual message. For example:4 MIME> ADD /CONTENT_TYPE="application/vnd.ms-excel"7You can edit or type the message to reveal its type andsubtype.CC @V2}r1ccR1UNEXPDEOF, unexpected EOF detected on input file:The end-of-file character was found before the message was9completely decoded using the BASE64 encoding and decodingscheme.lines and RFC822 headers (for example, From: and To:) prior to=the first MIME-Version: 1.0 header. Then retry the operation.DD WQL1=VIEWERR, error while attempting to launch viewer: 'filename' 'status'=An error was encountered while attempting to read or view the message file.;Respecify the VIEW command in the MIME$MAILCAP.DAT file and:ensure that the application it invokes is a native OpenVMS>application. If DECwindows is required, ensure that DECwindowsis installed and functional.EE tX>1oo=WRONGPART, cannot remove attachments to forwarded message(s)7An incorrect attachment part number was specified as an:argument to the REMOVE command. You can remove attachmentsto the primary message only.:Repecify the number for the attachment to be removed. Note;that in multipart messages, the first part (textual) shouldnot be removed.FF 'OM, Maintenance Ope"!A1S`&!MIRBFOVF, mirror buffer exceededration Module7An attempt to allocate a buffer for a LOOP NODE or LOOPYou must supply a password with the LOOP NODE or LOOP EXECUTORcommand.(Supply a password with the LOOP command.JJ X2!PG1cp1BADMOPFCT, bad MOP function received from targetration Module=A MOP message is rejected because the MOP Code field containsan invalid value.=Correct the MOP Code field in the device transmitting the MOPmessage.KK Y6!XO1gt5BADMOPPGM, bad MOP program type received from targetration ModuleA MOP message is rejected because the MOP Processor Type fieldcontains an invalid value.2Correct the MOP Processor Type field in the devicetransmitting the MOP message.MM [)!wA1Zg(ALPBFOVF, active looper buffer exceededration Module:An attempt to allocate a buffer for a LOOP CIRCUIT command;failed, possibly because virtual memory has been exhausted.7Increase the amount of virtual memory available for theprocess.NN [5!WN1fs4BADMOPSID, bad MOP software ID received from targetration Module;A MOP message is rejected because the MOP Software ID fieldcontains an invalid value.A MOP message is rejected because the MOP Format Version fieldcontains an invalid value.2Correct the MOP Format Version field in the devicetransmitting the MOP message.PP z!1P]QIOBFOVF, QIO buffer overflowration Module4An internal buffer used to obtain network management:information is sized inadequately. This is a program logicerror and should be reported.Contact HP Customer Support.QQ |>!T1o|=BADPARSETBL, internal error - invalid parsing table detectedration Module;An internal table is invalid. This is a program logic errorand should be reported.Contact HP Customer Support.RR )!;1Zg(NCBFAIL, undefined object on local noderation Module:There is a program logic error in a Network Control Block.Contact HP Customer Support.SS '!L*1Xe&NOUSERNAME, username must be suppliedration Module9You did not supply a user name with the LOOP NODE or LOOPEXECUTOR command.)Supply a user name with the LOOP command.TT 4!^91er 3NOUSERPASS, username and password must be suppliedration Module>You did not supply both a user name and password with the LOOPNODE or LOOP EXECUTOR command.8Supply a user name and a password with the LOOP command.UU NITOR, Monitor Uti^1>@INVSTLEVEL, structure level is invalid or already up to current structure levellityit still does not play back, the structure level is unknown tothis version of MONITOR.VV J 5@1fj\4ERROUTOPN, error opening conversion file for outputlity8An error occurred during processing of a MONITOR CONVERT4command. The specified output file cannot be opened.8This error may occur if the output file specification is incorrect.6Correct the output file specification and reenter yourcommand.WW  !>1RV% ERRPARSE, error parsing commandlity=An error is detected while parsing a Monitor utility command.correct syntax for utility commands, enter the HELP command atthe MONITOR> prompt.XX  &=/1W[%ERRPROMPT, error prompting for inputlityThe Monitor utility encountered a problem when it attempted to>collect system-specific information from the remote node. Thisis generally a network problem.9Check to make sure that the networking software is up and8running on the remote node. Reenter the MONITOR request.R FI+1w{ENOCLASS, requested /INPUT file classes not found or are incompatiblelity;The MONITOR request has been terminated because none of thespecified input recording file. This situation may result froma MONITOR request with a future beginning time could cause the+process to hibernate and then get canceled.8Verify that the file specified with the /INPUT qualifier;is the MONITOR recording file you wanted. Then, reenter theMONITOR request.R U 81imag7ESTABCON, establishing connection to remote node(s)...lity7Connections to one or more remote nodes are being made.3Connections to remote nodes are made when the /NODE=qualifier is used or when the CLUSTER class is requested. All>connections to remote nodes are made before data collection is initiated.None.R # 0E1ae5/INVVIEWSP, invalid /VIEWING_TIME specificationlity6The /VIEWING_TIME value must be an unsigned contiguous:string of decimal digits forming a value in the range of 1to 9,999,999, inclusive.=Reenter the MONITOR request, specifying a valid /VIEWING_TIMEvalue.R Y"2O1cgk1INVBTIMSP, invalid /BEGINNING time specificationlity2The value of the /BEGINNING qualifier is specifiedvalue returned to the Monitor utility from one of the run-time/library terminal-independent screen procedures. R 2=1MQUNEXPERR, unexpected errorlityrequest, are currently defined. As an alternative, specify the=/ITEM=all qualifier to obtain all items available in the filefor the requested class.R ;)Q?1Z^(NOCPUS, requested cpu[s] are not activelityCorrect the CPU specification and reenter the MONITOR command.R B&u!1W[%INVCPUID, invalid CPU identificationlity;The CPU identification specified with the /CPU qualifier is8invalid. Valid CPU identifications are integers 0 to 31. Correct and reenter the command.R DBfO1sw,AREQFILMIS, requested file is missing from input file 'file-name'lity9The data describing the file requested with the /FILENAME+qualifier does not exist in the input file.=Correct the /FILENAME qualifier specification and reenter theMONITOR command.R CHTak1U?NOOUTPUT, no output selected ... specify /DISPLAY, /RECORD, or /SUMMARYlityReenter the MONITOR request, specifying any combination of the+qualifiers: /DISPLAY, /RECORD, or /SUMMARY.R bI.1_ct-NODEINIERR, error during node initializationlity;An error occurred during the initialization of a node. This;error can occur if an attempted connection to a remote nodefails.8Determine whether the network is working properly on the;remote node. When the node can be successfully initialized,reenter the MONITOR command.R P11bf0NODENOTAVAIL, requested nodes are not availablelity7The remote nodes specified in a MONITOR request are not:currently accessible over the network. Therefore, they are6not available for data collection from the local node.=Determine why the remote nodes are not available. Reenter the=MONITOR command when they do become accessible from the localnode.R 3R>"1os#E=NODENOTMEM, node 'node-name' is not a member of this clusterlity9The requested node is not a member of the OpenVMS Cluster>environment specified in the request. MONITOR can collect data6only from nodes within an OpenVMS Cluster environment.!Correct and reenter your command.R YSC`1txkBNODENOTPRES, 1 or more nodes requested do not exist in input filelity=At least one of the nodes requested during a playback command!does not exist in the input file.6Enter the command without a node name specification to9determine which nodes are contained within the file. Then!correct and reenter your command.R O_/L1`da.INVETIMSP, invalid /ENDING time specificationlityOpenVMS DCL Dictionary for more information on specifying timevalues.8Reenter the MONITOR request with a correct value for the/ENDING qualifier.R A_=_1nrSrequired. If, however, the /BEGINNING qualifier is incorrectly=specified and if future monitoring is not desired, cancel theMONITOR request and reenter it.R {Aw1rv@NORBS, TOPRBS data is not available in the requested input filelity;A MONITOR PROCESSES/TOPRBS playback request has been issued>for an input file that contains no TOPRBS data. Such a request;attempts to retrieve information about the top consumers of;real balance slot faults. Starting with OpenVMS VAX Version<6.0, this information is incorporated in the PROCESSES class>of monitor data, where it can be recorded and then played back:from a monitor recording file. In this instance, the input=file must have been recorded prior to Version 6.0 because the-PROCESSES class does not contain TOPRBS data.;Reissue the MONITOR PROCESSES request to obtain information:about processes, but do not specify the /TOPRBS qualifier.R |YP1W:SQUALERR, more than one statistic qualifier specified for 'class-name' classlity7b1os =INVINPFIL, /INPUT file is not a valid MONITOR recording filelity=The file specified with the /INPUT qualifier is not a MONITOR6recording file. When MONITOR creates a recording file,:identification information is stored in the header record;;this information is then verified when the file is used forqualifiers by entering a DCL command similar to the following:$ HELP MONITOR class_name_qualifiers"Then, reenter the MONITOR request.%%R 'FoO1w{9ERMSFILMIS, 1 or more requested RMS files are missing from input filelity8The data describing one or more files requested with the5/FILENAME qualifier does not exist in the input file.=Correct the /FILENAME qualifier specification and reenter theMONITOR command.&&R U1>SRVMISMATCH, MONITOR server on remote node is an incompatible versionlity3An attempt was made to monitor a node running on an;incompatible version of the Monitor utility. This can occur>in an OpenVMS Cluster environment if all nodes are not running>the same version of the OpenVMS operating system. This is only:a warning and the Monitor request will continue to monitor=other requested nodes running the same version as the node on which the request was initiated.None.''R H{1LPCLASDISAB, class disabledlity>One or more of the specified class names are not valid MONITORclasses.;Check the list of valid monitor classes by entering the DCL>command HELP MONITOR. Correct and reenter the MONITOR command.((R Ux1A=INVITEMNM, /ITEM name 'item-name' is invalid or not uniquely identifiedlity9The specified item name is not defined for the class with>which it is specified. This message can result from specifying=an item name with too few characters to uniquely identify it.:Check the list of items defined for the requested class byThe monitor request continues execution, monitoring only those9requested classes that are present in the input recordingfile.:If an incorrect input file has been specified, correct andreenter the command.++R y01=CLASUNK, some requested class(es) have file structure levels: incompatible with the current version of MONITORlity=One or more of the requested monitor classes in the specifiedthe current version of the Monitor utility. This situation may>result from reading a file that is created by a version of the6Monitor utility higher than the one currently running.;No action is required. The monitor request will continue to9execute, monitoring only those requested classes that arebeing displayed or recorded are individual disks. MONITOR willBecause MONITOR collects information about mounted disks only,;you can reduce the number of disks monitored by dismounting unused disks.//R ] *^1[_o)IGNFIL, ignoring input file: 'file-spec'lity;An input file specified in an /INPUT list was excluded from!inclusion in a multifile summary.7If the ignored file should be included in the multifile;summary, then examine the linked error message, correct the=situation described therein, and reenter the MONITOR request.00R M#a1TX_"NOINPFILES, no usable input fileslity6A multifile summary is requested but none of the files)specified in the /INPUT list can be used.>Examine the IGNFIL error messages preceding this message. Each;one identifies a file that is ignored, and explains why the>file cannot be used. A typical situation where input files are=ignored is one where the /BEGINNING and/or /ENDING qualifiers:are specified and the ignored files do not contain data in=the range of the requested time. Reenter the MONITOR request,4specifying at least one input file that can be used.11R  =k1nrUNo action is necessary. However, you can avoid this message by+issuing the command without the POOL class.22R 'J1X\&COLLERR, error during data collectionlity;An unexpected error occurred while collecting the requested monitor data.;Correct the error indicated by the linked message and rerun8the MONITOR command. If the linked message is NOPRIV, it;may indicate that the Monitor utility is not installed withReenter the MONITOR command; specify a file with the /FILENAME qualifier.66R ^a1f>PDQUALERR, more than one display type qualifier specified for 'class-name' classlity:The MONITOR command specified more than one of the display>type qualifiers (/TOPBIO, /TOPCPU, /TOPDIO, /TOPFAULT) for the>PROCESSES class. Only one of these qualifiers may be specifiedfor each MONITOR request.=Reenter the MONITOR command, specifying only one display type"qualifier for the PROCESSES class.77R  @g1quN?FILTRNERR, input RMS filename is not unique across the CLUSTERlity=A single file name specified with the /FILENAME qualifier for;the RMS class translated to a different file on one or moreMonitoring is requested to begin at a time that is the same asin double quotes. For live monitoring and playback, delta time7specifications are offset from the current system time.(Correct and reenter the MONITOR request.99R n>)1osW=BEGRAN, requested beginning time beyond range of /INPUT filelity>Monitoring of an input recording file is requested to begin at=a time later than the ending time indicated in the file. This;error occurs most frequently when a delta time is specified;in the /BEGINNING qualifier. Delta time specifications must:always be preceded by a plus or minus sign. If a plus sign:is used, the entire time specification must be enclosed in;double quotes. For both live monitoring and playback, deltaA MOP message is rejected because the MOP Processor Type fieldcontains an invalid value.2Correct the MOP Processor Type field in the devicetransmitting the MOP message.MM [)!wA1Zg(ALPBFOVF, active looper buffer exceededration Module:An attempt to allocate a buffer for a LOOP CIRCUIT command;failed, possibly because virtual memory has been exhausted.7Increase the amount of virtual memory available for theprocess.NN [5!WN1fs4BADMOPSID, bad MOP software ID received from targetration Module;A MOP message is rejected because the MOP Software ID fieldcontains an invalid value.A MOP message is rejected because the MOP Format Version fieldcontains an invalid value.2Correct the MOP Format Version field in the devicetransmitting the MOP message.PP z!1P]QIOBFOVF, QIO buffer overflowration Module4An internal buffer used to obtain network management:information is sized inadequately. This is a program logicerror and should be reported.Contact HP Customer Support.QQ |>!T1o|=BADPARSETBL, internal error - invalid parsing table detectedration Module;An internal table is invalid. This is a program logic errorand should be reported.Contact HP Customer Support.RR )!;1Zg(NCBFAIL, undefined object on local noderation Module:There is a program logic error in a Network Control Block.Contact HP Customer Support.SS '!L*1Xe&NOUSERNAME, username must be suppliedration Module9You did not supply a user name with the LOOP NODE or LOOPEXECUTOR command.)Supply a user name with the LOOP command.TT 4!^91er 3NOUSERPASS, username and password must be suppliedration Module>You did not supply both a user name and password with the LOOPNODE or LOOP EXECUTOR command.8Supply a user name and a password with the LOOP command.UU NITOR, Monitor Uti^1>@INVSTLEVEL, structure level is invalid or already up to current structure levellityit still does not play back, the structure level is unknown tothis version of MONITOR.VV J 5@1fj\4ERROUTOPN, error opening conversion file for outputlity8An error occurred during processing of a MONITOR CONVERT4command. The specified output file cannot be opened.8This error may occur if the output file specification is incorrect.6Correct the output file specification and reenter yourcommand.WW  !>1RV% ERRPARSE, error parsing commandlity=An error is detected while parsing a Monitor utility command.correct syntax for utility commands, enter the HELP command atthe MONITOR> prompt.XX  &=/1W[%ERRPROMPT, error prompting for inputlitycommand when insufficient paged pool was available to allocate;a file system buffer cache using the sizes specified by theMount the device as a member of a shadow set. You can use DSA::to specify a generic virtual unit if you do not know which!virtual unit contains the device.   1MMWILLQUAL, invalid qualifier;Either a required qualifier was omitted from the command or;an invalid qualifier was supplied with the command. Certain>qualifiers are valid only in conjunction with other qualifiers:(such as /SHADOW) or are valid only when optional softwareproducts are installed.;Refer to online Help or the HP OpenVMS DCL Dictionary for a;description of valid qualifier combinations; then enter thecorrected command. i 441eeG{3NOTACLU, 'device-name' is not a clusterwide device9An attempt was made to mount a device on all nodes in the6OpenVMS Cluster environment by specifying the /CLUSTER9qualifier; however, the device specified is not available6clusterwide, nor can it be made available clusterwide.3Reenter the command without the /CLUSTER qualifier.  !L21RR OFFLINE, 'device-name' off line=The specified device is off line. The requested action cannot be completed.1Place the device on line and reenter the command. #2!1TT"LOGNAME, logical name is too long1A logical name contains more than 255 characters. Correct and reenter the command. +KN1\\*NOTANSI, not ANSI volume on 'device-name';The volume on the specified device is not an ANSI-formattedmagnetic tape.;Initialize the tape and reenter the mount request, or mountthe tape foreign. *R61[[)SETLIMIT, too many volumes in volume set9The maximum permissible number of volumes in a volume set(255) has been reached.5Find the other volumes in the set and use them first.  <1mm1;DIFVOLMNT, different volume already mounted on this device9Previously, a different volume was mounted on this device:on another node in the cluster. The device may be in mount:verification on the other node. Either the original volume=was removed from the device and replaced with another, or its&volume identification was overwritten.7Restore the previously mounted volume to the device. If;this is not possible, dismount the device on all nodes that:currently have it mounted. Then retry the mount operation. G1e1bbY0BADHOMBLK, bad home block encountered on volume=An I/O error occurred while reading a home block during /BIND>processing. The first occurrence of this message is a warning;the second is fatal.3Repair using the Analyze/Disk_Structure utility, or0reinitialize the volume and retry the operation. IrbV1[CINVBACKLINK, invalid backlink in extension header 'file-number' on- relative volume 'volume-number'MOUNT cannot determine the current master member of the shadow;set. This problem can occur if the shadow set is undergoingfrequent changes in membership.9Find and correct any problems that may create instability9in the shadow set (for example, malfunctioning devices or8communications problems among the nodes in the cluster). I##n1TT["SHDWCOPYREQ, shadow copy required=A shadow set member requires a shadow copy operation, but you/specified that copy operations are not allowed.=Verify that the volume can be initialized (that is, ascertainThe specified device was successfully added to the shadow set.Examine the accompanying failure status code, then correct theerror and reenter the command. (>61oo=SHDWMEMSUCC, 'ddcu:' is now a valid member of the shadow set5The specified device is now a full shadow set member.None. ),(X1YY;'NONLOCAL, device is not a local device9The device name specified in a command or program requestcontains a network node name.=Verify the device name (or logical name, if a logical name is>specified) and reenter the command, specifying a device on the host system. +,SFs1=9REMOUVOL, REMOUNT relative volume 'nn' 'volume-label' on 'device-name'6An error requiring operator intervention occurred on amagnetic tape.=Perform the required physical actions and use the DCL command4REPLY to notify the system that the volume is ready. G- 1P1bb Y0DISMAL, all of the volumes have been dismounted>All of the volumes mounted by this invocation of $MOUNT or the>MOUNT command have been dismounted because of errors that were(detected after the volumes were mounted.Find or initialize another volume to be the shadow set master. . XM1@DISMOUNTD, volume 'volume-name' of volume-set 'volume-set-name' dismounted9The specified volume of the specified volume set has been:dismounted because of errors encountered in processing the>volume after it is mounted. An error with part of a volume set;causes the entire volume set to be dismounted. This messageIf the volume set name is not available, the string "name n/a"&appears as the name of the volume set.=Take action based on the accompanying message and reenter theMOUNT command. .5<S1ff4ISAMBR, 'device-name' is a member of the shadow set;The specified device is already a member of the shadow set.7None. For completeness, MOUNT reports the status of allmembers of the shadow set. N/ 4L1ee`3DISMPART, some of the volumes have been dismounted;Some of the volumes that were mounted by this invocation of;the Mount utility or the MOUNT command have been dismounted6due to errors detected after the volumes were mounted.^1hh6MMEABORT, mount aborted by media management subsystem=The media management subsystem has aborted the mount request.>Correct the problem reported by the media management subsystemand retry the mount operation. 6#W1TT+"WRITELOCK, volume is write locked;This message indicates that the DCL command MOUNT found thevolume to be write-locked.;None, unless you wish to write on the volume. In that case,;you must write-enable the drive, and dismount and mount thevolume. R7h1Jd7DEVBUSYINSET, mount or dismount in progress on device,/ '$DSAdevice$IN_SET' lock failure;When the members of a shadow set mount operation were being9validated, MOUNT was unable to obtain the "member of set">lock, which is needed to validate the membership of the shadow=set. This transient condition is usually caused by some other>activity involving this shadow set, such as a mount, dismount,or mount verification.7MOUNT retries the mount operation for 30 seconds before.returning this status to the user or to OPCOM.:Ensure that no other mount nor dismount operation is being8performed. Also check whether the shadow set is in Mount8Verification on any node in the cluster. When the shadowrequest. Check the accompanying message for details about what"was wrong with the original reply.'' DCe1tt^BALHOMERR, I/O error reading alternate home block on 'device-name'6DOSETVOL, Use SET VOLUME/STRUCTURE_LEVEL and remount.;This message accompanies the INCONSTRUCT and INCONSET error9messages to provide instructions for making the volume orvolume set consistent.>If the volume or volume set is not currently mounted /NOSHARE,set. Afterwards, you can dismount the volume or volume set andmount it as you wish.-- I=E1nnWait for operator assistance, perform the request yourself, orabort the request.11 6Q Q1LLHDRVERR, fatal drive error>In a SCSI OpenVMS Cluster environment, a request has been made>to mount a device on a shared SCSI bus and the device does not,support SCSI-2 tagged command queuing (TCQ).>If you want to mount a device on a shared SCSI bus, the devicemust support TCQ.22 Q2+1cc1MOUNTED, 'volume-label' mounted on 'device-name'*This message announces a successful mount.None.33 R+`a1\\*WRTHOMBLK, I/O error rewriting home block>An I/O error occurred while writing the home block of a volume during the MOUNT/BIND operation.=Check that the hardware is functioning properly. Reinitialize"the disks and retry the operation.44 S7:K1hh6BADWINDOWS, value for /WINDOWS qualifier out of range9The value supplied for the /WINDOWS qualifier is invalid.>Execute the command again specifying a value in the range of 7 through 80.55 ,U561ff>4BADMDFMT, invalid syntax on /MEDIA_FORMAT qualifier5The syntax of the /MEDIA_FORMAT qualifier is invalid.5Correct the command and reenter it. The /MEDIA_FORMAT5qualifier can have one of three values: COMPACTION or5NOCOMPACTION for tape media, or CDROM for disk media.66 aY_51s>NODEVAVL, device 'device-name' is not available for mounting. ['optional comment']4Someone else has allocated the device you requested.=The operator can either abort the mount or redirect the mount;to a different device. To redirect the mount to a different9device, specify SUBSTITUTE in the reply text, as follows:9 REPLY/TO=identification-number "SUBSTITUTE device-name".To cancel the mount, use the /ABORT qualifier:# REPLY/ABORT=identification-number;Alternatively, the user can enter Ctrl/Y to abort the mount,operation and then mount a different device.77 \WE1~?OPT_WBM_MERGE, shadow set requires a merge, continuing without bitmapset requires a merge. The shadow set must be consistent before0a member can be removed to start a write bitmap.6Execute the MOUNT command without the /POLICY=MINICOPY)qualifier to allow the merge to complete.>> 'aV139=SHDWMEMMCPY, 'ddcu:' added to the shadow set with a minicopy operation;The qualifier /POLICY=MINICOPY{=OPTIONAL} was specified and;the member has been added to the shadow set with a minicopy8operation. The specified device is now a full shadow setmember.:If the write bitmap that is to be used for the minicopy is=deleted before the minicopy occurs, a full copy is performed.4As with all copy and merge operations, the number ofMount either a tape that the user has write privilege to, or a=blank tape. Request initialization of this tape when replyingto the next mount request.AA c ?1pp>INCOMPAT, qualifiers incompatible with already mounted volume:A DCL command MOUNT is entered to mount a shareable volume>that is already mounted; the characteristics of the volume are*already established and cannot be changed.;Use the DCL command SHOW DEVICE to determine how the volume7is mounted. Reenter the DCL command MOUNT/SHARE without qualifiers.BB lc/1``~~.NOTLABEL, 'volume-label' not on 'device-name'>The operator responded to a message from the magnetic tape ACPReissue the command, using a phase II volume shadowing virtual>unit name (DSAnn) consistent with phase II (host-based) volume shadowing.DD 5e*81[[G)WBM_NOTSTARTED, write bitmap not started>The qualifier /POLICY=MINICOPY=OPTIONAL was specified, but the:write bitmap could not be started by the shadowing driver.8This message likely indicates a memory resource problem.9None required. The operation completed without starting a write bitmap.7However, to learn why the write bitmap failed to start,;dismount the shadow set and reissue the MOUNT command using>the /POLICY=MINICOPY (that is, without the =OPTIONAL keyword).;The failure code from shadowing will be displayed by MOUNT.EE e3m1ddI2XSMBRS, maximum number of shadow members exceeded:You have specified too many members for a shadow set. This>condition can occur if you try to add more members to a shadow:set that is already mounted or if you specify the /INCLUDE/qualifier, causing other members to be located.;Omit one or more members from the MOUNT command so that the0resulting shadow set has three or fewer members.FF f5`21ff4MOUVOL, MOUNT relative volume 'nn' on 'device-name';During a read operation, the operator is requested to mount#the next reel in a multivolume set.1Mount the indicated reel on the device specified.GG Pi Ba1ssbAINCONFOR, inconsistent /FOREIGN option. Cluster mounted 'option'7The qualifier specified on the current mounting node is>different from the value used by other nodes that have alreadymounted the same disk.Verify that the /OWNER_UIC option is specified consistently on all nodes.LL Ql FK1wwcEINCONPROT, inconsistent /PROTECTION option. Verify volume protection8The protection specified in the /PROTECTION qualifier is;not consistent with the protection that the device has been+mounted with on other nodes in the cluster.Both disks and magnetic tapes appear in the list of devices to be mounted.;Specify one or the other and reenter the command; check thelogical name assignments.RR p W!10@INCONSET, structure level on 'device-name' is inconsistent with volume set6The file structure level recorded on the volume is not8consistent with the structure level of the volume set of>which it is a part. The volume is marked as Files-11 structure;level 2 while the rest of the volume set is structure level>5, or vice versa. This condition can occur if a system failure>occurs during the execution of a SET VOLUME /STRUCTURE_LEVEL=5command.:This error is fatal for all shareable mounts (for example,2MOUNT/SYSTEM and MOUNT/SHARE). It is a warning for:/NOSHARE mounts; however, the volume set is locked against9modification. That is, existing files can be accessed and0updated, but they cannot be extended or deleted.=If the volume set is not currently mounted /NOSHARE, dismount:the portion that is currently mounted and mount the entire;set using /NOSHARE. Then execute the DCL command SET VOLUME9/STRUCTURE_LEVEL=5 on the volume set. Afterwards, you can1dismount the volume set and mount it as you wish.SS Yq A]1rrk@INCONSHR, inconsistent sharing option. Cluster mounted 'option'device, possibly on another node in the cluster. The condition2may persist under one of the following conditions:7o The other mount is waiting for an operator request to complete.o The device is malfunctioning.;o An application has taken the DMT$_device_name lock and is not releasing it.:MOUNT will retry the mount operation for 30 seconds beforereturning this status.;Determine where the other mount or dismount operation is in7progress and rectify the problem that is holding it up.:Use the SDA command SHOW RESOURCE/NAME=DMT$_ to see if any7applications or processes have the lock granted. If so,;shut down that application or process until after the mountoperations are complete.VV s:j1kk49UNRELVOL, volume is not part of volume set being mountedbelonging to the same volume set can be mounted using the sameMOUNT command.7Mount the specified volume using a separate command, or1specify the /BIND qualifier in the MOUNT command.lity commands, enter the HELP command atthe MONITOR> prompt.XX  &=/1W[%ERRPROMPT, error prompting for inputlitydevice, possibly on another node in the cluster. The condition2may persist under one of the following conditions:7o The other mount is waiting for an operator request to complete.o The device is malfunctioning.;o An application has taken the MOU$_device_name lock and is not releasing it.:MOUNT will retry the mount operation for 30 seconds beforereturning this status.;Determine where the other mount or dismount operation is in7progress and rectify the problem that is holding it up.:Use the SDA command SHOW RESOURCE/NAME=MOU$_ to see if any7applications or processes have the lock granted. If so,;shut down that application or process until after the mountoperations are complete. >u [1QQPAQBTIME, ACP queue is unstable>The Mount utility tried to start the ancillary control process<(ACP) associated with the MOUNT command, but the ACP did not'respond within the expected time frame.;Determine why the ACP cannot be started. For example, checkwhether it exists on the disk. Zu F]1wwlEINCONWRITE, inconsistent /(NO)WRITE option. Cluster mounted 'option':The write option specified on the current mounting node is=different from the write option used by other nodes that havealready mounted the same disk.device, possibly on another node in the cluster. The condition2may persist under one of the following conditions:7o The other mount is waiting for an operator request to complete.o The device is malfunctioning.;o An application has taken the MOU$DSA_device_name lock and is not releasing it.:MOUNT will retry the mount operation for 30 seconds beforereturning this status.;Determine where the other mount or dismount operation is in7progress and rectify the problem that is holding it up.9Use the SDA command SHOW RESOURCE/NAME=MOU$DSA_ to see if;any applications or processes have the lock granted. If so,;shut down that application or process until after the mountoperations are complete. v&X1WW%OPRQSTCAN, operator request canceledis not running and that the mount operation is being attemptedby a nonprivileged user.:MOUNT will retry the mount operation for 30 seconds beforereturning this status.>Verify that the AUDIT_SERVER process is running or execute the(MOUNT command from a privileged process. w 'f=1XX&DUPDEVSPC, duplicate device specified=The same tape device is specified more than once in a list of'tape devices for the DCL command MOUNT.device, possibly on another node in the cluster. The condition2may persist under one of the following conditions:7o The other mount is waiting for an operator request to complete.o The device is malfunctioning.;o An application has taken the SYS$_device_name lock and is not releasing it.:MOUNT will retry the mount operation for 30 seconds beforereturning this status.;Determine where the other mount or dismount operation is in7progress and rectify the problem that is holding it up.:Use the SDA command SHOW RESOURCE/NAME=SYS$_ to see if any7applications or processes have the lock granted. If so,;shut down that application or process until after the mountoperations are complete. x.>/1__-OPRSNDERR, error sending request to operator=MOUNT failed in an attempt to send a message to the operator..Take action based on the accompanying message. kyU=1@}?DEVBUSYVOL, mount or dismount in progress on device, VOL$ lock failure=A mount or dismount operation is currently in progress on the>device, possibly on another node in the cluster. The condition2may persist under one of the following conditions:7o The other mount is waiting for an operator request to complete.o The device is malfunctioning.;o An application has taken the VOL$_device_name lock and is not releasing it.:MOUNT will retry the mount operation for 30 seconds beforereturning this status.;Determine where the other mount or dismount operation is in7progress and rectify the problem that is holding it up.:Use the SDA command SHOW RESOURCE/NAME=VOL$_ to see if any7applications or processes have the lock granted. If so,;shut down that application or process until after the mountoperations are complete. G<O1mm Y;NOTODS2, shadow members must be Files-11 Structure Level 2:A specified member of a shadow set is not Files-11 On-Disk=Structure Level 2 (ODS-2). A non-ODS-2 volume can be added to#a shadow set only as a copy target.>Find or initialize a valid ODS-2 volume to act as a master forthe shadow set. %01aa/7/SRCMBRADD, source member added to virtual unit6A volume has been added as a valid source member to an>already mounted shadow set. This action occurs only when MOUNT>determines that the new member's storage control block exactly>matches the storage control block of the mounted virtual unit.>This would be the case if you add a new shadow set member thatThe primary home block of a disk is corrupt or unreadable; the*backup volume is used to mount the volume.9Repair the disk using the Analyze/Disk_Structure utility. ?V/1pp>RMTMNTFAIL, 'device-name' failed to mount on node 'node-name'the specified volume set is found to contain a volume with thelabel specified.5Verify the labels on the existing volumes in the set.7Choose a new label for the volume you are adding to the9set, reinitialize the volume, and reenter the DCL command MOUNT/BIND. 41ee3BADSECSYS, failed to create or access SECURITY.SYS4The Mount utility was unable to create and write the;SECURITY.SYS file on a volume that was initialized prior to8OpenVMS Version 6.0, usually because the device is full.!Try any of the following actions:0o Mount the device using the /NOWRITE qualifier.:o Mount the device with /OVERRIDE=SECURITY if the security5 policy of the system permits this. Once the disk is; mounted, free up approximately 10 blocks on the disk, and< then remount the disk without using the /OVERRIDE=SECURITY qualifier.;o Mount the device on a version of OpenVMS prior to Version; 6.0 and free up about 10 blocks on the disk. Then remount. the disk on the later version of the system.!! Ck1ttBRQSTDON, operator request canceled - mount completed successfully>A previously issued operator request has been canceled and the+mount operation has completed successfully.None."" 06Z1aa/BADSHADOW, invalid syntax on /SHADOW qualifier5The MOUNT command contains invalid shadow set syntax.:Correct the syntax and reenter the command, or correct theprogram that caused the error.## +WV1\\ *NOTSHDWDEV, not a valid shadow set member-There are two possible causes for this error:9o You did not specify an explicit allocation class in the% device name of a shadow set member.5o You specified a device that does not support volume: shadowing to be a shadow set member. Only certain disks,8 including Digital Storage Architecture and SCSI disks, support volume shadowing.Reenter the command, specifying the shadow set virtual unit as.DSAnnn, with no allocation class or node name.%% f1AAUTOMEMCOPY, 'device-name' automatically added to the shadow set# with a copy operation4The MOUNT qualifier /INCLUDE was specified, allowing9members that were previously part of the shadow set to be8automatically added to the set. The indicated device was:successfully added to the shadow set. A copy operation was6initiated, making this device a target for all blocks.None.&& go1 AAUTOMEMERGE, 'device-name' automatically added to the shadow set$ with a merge operation;The /INCLUDE qualifier was specified, allowing members that:were previously part of the shadow set to be automaticallyto the other members of the set except for possible incomplete7write operations, for which the shadowing software willcheck.None.'' BB1ssNTAAUTOMEMSUCC, 'device-name' automatically added to the shadow set;The /INCLUDE qualifier was specified, allowing members that:were previously part of the shadow set to be automaticallyA MOUNT switch parameter is invalid. For example, a nonnumeric4character might be specified in a numeric parameter.Correct the invalid parameter.// j1MM|BADUIC, invalid UIC syntax9The command contains an invalid UIC. The group and member>portions of a UIC must both be specified and be separated by a6comma, or a valid rights identifier must be specified.9Enter the DCL command HELP or refer to the HP OpenVMS DCL;Dictionary for the correct syntax, then enter the correctedcommand.00 8RD1ii7BADUNDFAT, invalid keyword on /UNDEFINED_FAT qualifier7The MOUNT command specified an invalid keyword with the/UNDEFINED_FAT qualifier.;Select a correct combination of keywords from the following categories.Record format keywords:(o FIXED:record-attributes...,record-sizeo VARIABLE:record-attributes...o STREAM:record-sizeo STREAM_LF:record-sizeo STREAM_CR:record-size#o LSB_VARIABLE:record-attributes...Record attribute keywords: o NONE (None)o CR (Carriage_return)o FTN (Fortran) o PRN (Print)o NOBKS (No-Block-Span)7Record size attribute: a decimal number from 1 to 32767>For more information about selecting keywords, refer to the HP5OpenVMS System Management Utilities Reference Manual.11 E,1vvDNOTVOLSET, volume on 'device-name' not in volume set 'volume-label'device is not part of the volume set specified by the file set/identifier in the first file in the volume set.=For a disk, mount the device by itself using a separate MOUNTFILE_ID=n Enables file identification caching, where n is= the number of entries and must be greater than 1.4NOFILE_ID Disables file identification caching. the extent cache, where n is the number of one-: thousandths of the currently available free! space on the disk.>QUOTA=n Enables quota caching, where n is the number of* entries in the quota cache.&NOQUOTA Disables quota caching.8TAPE_DATA Enables write caching for a magnetic tape device.*WRITETHROUGH Disables writeback caching.>See the MOUNT documentation or Help for more information about these keywords and their values.44  .@1__V-FILESTRUCT, unsupported file structure level7This message occurs on pre-Version 7.2 systems when you>attempt to access a disk that was initialized on a Version 7.2;or later system. Version 7.2 extends the size of the BITMAP9field and the increased size is incompatible with earlier versions.names and volume labels specified in the command and retry the operation.88 =>1nn1Specify the MOUNT command using an explicit shadow set virtual unit number.>> B<ru1mmT;BATCHNOOPR, no operator available to service batch request8The MOUNT request has been aborted because the batch job8requires operator assistance and no operator is present.7Either locate an operator or correct the condition thatcommand and then reenter the command with a matching number ofdevices and volume labels.CC R1%:ACCERR, non-blank accessibility field in volume labels on 'device-name'>The accessibility field on the magnetic tape, which is mountedEither a volume set with the specified name is already mounted7in the OpenVMS Cluster environment, or the devices were;mounted into the volume set in a different order on anothernode.:If the same volume set is already mounted on another node,:ensure that devices are mounted into the volume set in the:same order. Otherwise, wait for the other volume set to be>dismounted. The name of a volume set cannot be changed once itis established. >_/1oo=VOLSETSTS, change of status for volume set 'volume-set-name':MOUNT encountered a condition that resulted in a change of#state for the specified volume set..Take action based on the accompanying message. {F1wwEVOLSHDWMEM, mounting a shadow set member volume; volume write locked:The volume being mounted is a former shadow set member. Tothe volume and remount it with the /OVERRIDE=SHADOW_MEMBERSHIP qualifier. a1IANOALOCLASS, allocation class not allowed with shadowing phase II virtual unit nameunit. Allocation classes are not allowed in virtual unit names:with volume shadowing phase II (OpenVMS Volume Shadowing).=Reenter the command without specifying an allocation class on;the virtual unit. The virtual unit must be specified in the:form DSA or DSAnnnn, where nnnn represents a unique numberfrom 0 to 9999.  6[/1gg5VOLSTATUS, change of status for volume 'volume-name':MOUNT encountered a condition that resulted in a change ofstate for the specified volume..Take action based on the accompanying message.  r7o1hh6BITMAPERR, I/O error on storage bitmap; volume locked6An I/O error was encountered during a mount operation.7Existing files on the volume can be accessed, but other=operations (for example, create and delete) are not possible.9Either repair the volume using the Analyze/Disk_Structure4utility or copy the volume using the Backup utility.  53=1ff4BITMAPINV, storage bitmap is invalid, volume locked2The volume's storage bitmap contains invalid data.K1ooa=WAITDEVRDY, Waiting for device 'device-name' to become ready;The Mount utility is waiting for the stacker/loader to loadthe next tape.5None. When the next tape becomes available, the mountoperation will complete.:If you wish to terminate the mount procedure, enter Ctrl/Ywhen this message displays.  $F!1UU#ACPNAME, ACP file name is too long9The file name specified for an ACP image has more than 20 characters. Correct and reenter the command.  5}1ffL4ILLOPT, qualifier(s) not appropriate to this device>A MOUNT or INITIALIZE command specifies qualifiers that do not;apply to this device type or medium. Certain qualifiers are=applicable only to magnetic tape, or only to disk, or only to,the ISO 9660 or High Sierra file structures.5Enter the HELP command or refer to the HP OpenVMS DCL=Dictionary for a list of qualifiers, then enter the correctedcommand.&DUPDEVSPC, duplicate device specified=The same tape device is specified more than once in a list of'tape devices for the DCL command MOUNT.device, possibly on another node in the cluster. The condition2may persist under one of the following conditions:7o The other mount is waiting for an operator request to complete.o The device is malfunctioning.;o An application has taken the SYS$_device_name lock and is not releasing it.:MOUNT will retry the mount operation for 30 seconds beforereturning this status.;Determine where the other mount or dismount operation is in7progress and rectify the problem that is holding it up.:Use the SDA command SHOW RESOURCE/NAME=SYS$_ to see if any7applications or processes have the lock granted. If so,;shut down that application or process until after the mountoperations are complete. x.>/1__-OPRSNDERR, error sending request to operator=MOUNT failed in an attempt to send a message to the operator..Take action based on the accompanying message. kyU=1@}?DEVBUSYVOL, mount or dismount in progress on device, VOL$ lock failure=A mount or dismount operation is currently in progress on the>device, possibly on another node in the cluster. The condition2may persist under one of the following conditions:7o The other mount is waiting for an operator request to complete.o The device is malfunctioning.;o An application has taken the VOL$_device_name lock and is not releasing it.:MOUNT will retry the mount operation for 30 seconds beforereturning this status.;Determine where the other mount or dismount operation is in7progress and rectify the problem that is holding it up.:Use the SDA command SHOW RESOURCE/NAME=VOL$_ to see if any7applications or processes have the lock granted. If so,;shut down that application or process until after the mountoperations are complete. G<O1mm Y;NOTODS2, shadow members must be Files-11 Structure Level 2:A specified member of a shadow set is not Files-11 On-Disk=Structure Level 2 (ODS-2). A non-ODS-2 volume can be added to#a shadow set only as a copy target.>Find or initialize a valid ODS-2 volume to act as a master forthe shadow set. %01aa/7/SRCMBRADD, source member added to virtual unit6A volume has been added as a valid source member to an>already mounted shadow set. This action occurs only when MOUNT>determines that the new member's storage control block exactly>matches the storage control block of the mounted virtual unit.>This would be the case if you add a new shadow set member thatThe primary home block of a disk is corrupt or unreadable; the*backup volume is used to mount the volume.9Repair the disk using the Analyze/Disk_Structure utility. ?V/1pp>RMTMNTFAIL, 'device-name' failed to mount on node 'node-name'the specified volume set is found to contain a volume with thelabel specified.5Verify the labels on the existing volumes in the set.7Choose a new label for the volume you are adding to the9set, reinitialize the volume, and reenter the DCL command MOUNT/BIND. 41ee3BADSECSYS, failed to create or access SECURITY.SYS4The Mount utility was unable to create and write the;SECURITY.SYS file on a volume that was initialized prior to8OpenVMS Version 6.0, usually because the device is full.!Try any of the following actions:0o Mount the device using the /NOWRITE qualifier.:o Mount the device with /OVERRIDE=SECURITY if the security5 policy of the system permits this. Once the disk is; mounted, free up approximately 10 blocks on the disk, and< then remount the disk without using the /OVERRIDE=SECURITY qualifier.;o Mount the device on a version of OpenVMS prior to Version; 6.0 and free up about 10 blocks on the disk. Then remount. the disk on the later version of the system.!! Ck1ttBRQSTDON, operator request canceled - mount completed successfully>A previously issued operator request has been canceled and the+mount operation has completed successfully.None."" 06Z1aa/BADSHADOW, invalid syntax on /SHADOW qualifier5The MOUNT command contains invalid shadow set syntax.:Correct the syntax and reenter the command, or correct theprogram that caused the error.## +WV1\\ *NOTSHDWDEV, not a valid shadow set member-There are two possible causes for this error:9o You did not specify an explicit allocation class in the% device name of a shadow set member.5o You specified a device that does not support volume: shadowing to be a shadow set member. Only certain disks,8 including Digital Storage Architecture and SCSI disks, support volume shadowing.Reenter the command, specifying the shadow set virtual unit as.DSAnnn, with no allocation class or node name.%% f1AAUTOMEMCOPY, 'device-name' automatically added to the shadow set# with a copy operation4The MOUNT qualifier /INCLUDE was specified, allowing9members that were previously part of the shadow set to be8automatically added to the set. The indicated device was:successfully added to the shadow set. A copy operation was6initiated, making this device a target for all blocks.None.&& go1 AAUTOMEMERGE, 'device-name' automatically added to the shadow set$ with a merge operation;The /INCLUDE qualifier was specified, allowing members that:were previously part of the shadow set to be automaticallyto the other members of the set except for possible incomplete7write operations, for which the shadowing software willcheck.None.'' BB1ssNTAAUTOMEMSUCC, 'device-name' automatically added to the shadow set;The /INCLUDE qualifier was specified, allowing members that:were previously part of the shadow set to be automaticallyA MOUNT switch parameter is invalid. For example, a nonnumeric4character might be specified in a numeric parameter.Correct the invalid parameter.// j1MM|BADUIC, invalid UIC syntax9The command contains an invalid UIC. The group and member>portions of a UIC must both be specified and be separated by a6comma, or a valid rights identifier must be specified.9Enter the DCL command HELP or refer to the HP OpenVMS DCL;Dictionary for the correct syntax, then enter the correctedcommand.00 8RD1ii7BADUNDFAT, invalid keyword on /UNDEFINED_FAT qualifier7The MOUNT command specified an invalid keyword with the/UNDEFINED_FAT qualifier.;Select a correct combination of keywords from the following categories.Record format keywords:(o FIXED:record-attributes...,record-sizeo VARIABLE:record-attributes...o STREAM:record-sizeo STREAM_LF:record-sizeo STREAM_CR:record-size#o LSB_VARIABLE:record-attributes...Record attribute keywords: o NONE (None)o CR (Carriage_return)o FTN (Fortran) o PRN (Print)o NOBKS (No-Block-Span)7Record size attribute: a decimal number from 1 to 32767>For more information about selecting keywords, refer to the HP5OpenVMS System Management Utilities Reference Manual.11 E,1vvDNOTVOLSET, volume on 'device-name' not in volume set 'volume-label'device is not part of the volume set specified by the file set/identifier in the first file in the volume set.=For a disk, mount the device by itself using a separate MOUNTFILE_ID=n Enables file identification caching, where n is= the number of entries and must be greater than 1.4NOFILE_ID Disables file identification caching. the extent cache, where n is the number of one-: thousandths of the currently available free! space on the disk.>QUOTA=n Enables quota caching, where n is the number of* entries in the quota cache.&NOQUOTA Disables quota caching.8TAPE_DATA Enables write caching for a magnetic tape device.*WRITETHROUGH Disables writeback caching.>See the MOUNT documentation or Help for more information about these keywords and their values.44  .@1__V-FILESTRUCT, unsupported file structure level7This message occurs on pre-Version 7.2 systems when you>attempt to access a disk that was initialized on a Version 7.2;or later system. Version 7.2 extends the size of the BITMAP9field and the increased size is incompatible with earlier versions.names and volume labels specified in the command and retry the operation.88 =>1nn1Specify the MOUNT command using an explicit shadow set virtual unit number.>> B<ru1mmT;BATCHNOOPR, no operator available to service batch request8The MOUNT request has been aborted because the batch job8requires operator assistance and no operator is present.7Either locate an operator or correct the condition thatcommand and then reenter the command with a matching number ofdevices and volume labels.CC R1%:ACCERR, non-blank accessibility field in volume labels on 'device-name'>The accessibility field on the magnetic tape, which is mountedSee the error returns section of the LIB$GET_VM routine in the=HP OpenVMS RTL Library (LIB$) Manual for possible reasons for the error.N (UeG1:CNOMSGFND, unable to locate message translation for status 'status- code' Utility description can include multiple .MSGHLP$DATA files, whereas> a delete operation accesses only one .MSGHLP$DATA file. When= a search path is specified directly or by default, a delete< operation is performed only on the first .MSGHLP$DATA file in the search path.9If the message is in the database and you are certain the9correct .MSGHLP$DATA file is being accessed to delete the;message, but with no success, check to see that the messageprefix immediately following the specified "9" line, or delete5the untranslated nickname line from the .MSGHLP file.N =*Y/1[c)SYSERR, error returned by system service Utility9An error occurred while Help Message was trying to call asystem service or RTL routine..Take action based on the accompanying message.N |B6'1go5NOTFOUND, message not found in Help Message database Utility+This message can occur for several reasons:9o Help Message cannot find documentation for this message8 in a .MSGHLP$DATA file or search path specified by the< /LIBRARY qualifier or in the default database. The default= database is either SYS$HELP:MSGHLP$LIBRARY.MSGHLP$DATA or a; search path of .MSGHLP$DATA files defined by logical name MSGHLP$LIBRARY.;o The value in $STATUS maps to a message that is unknown to the system.;o A message documented as "shared" is being looked up under4 the facility code that displayed with the message.Perform the following checks::o If you include a search string, check for typing errors,: and ensure that the string contains at least one word of< three or more characters (shorter words are ignored in the search).=o If you paste a message into the search string, check to see; if you failed to delete any operation-specific value that4 was inserted into a variable field in the message.;o Check to see if any installed .MSGHLP$DATA files that you= require are missing from the search path defined by logical< name MSGHLP$LIBRARY or from a search path that you want to' specify using the /LIBRARY qualifier.9o If you are attempting to access the message description< from a $STATUS value, check whether the messages .EXE file9 is known to the system. If necessary, use a SET MESSAGE7 command to include any unknown messages. For example:' $ SET MESSAGE SYS$MESSAGE:NETWRKMSG9o If you have specified /FACILITY, omit this qualifier or specify /FACILITY=SHARED.:o If the undocumented message was issued by a source other= than OpenVMS Engineering, report the missing message to the appropriate party.7If you perform these checks and the search still fails,9contact HP Customer Support about the missing message andthe facility that produced it. N X'I1X`.&SORTERR, error returned while sorting Utility;An error occurred while Help Message was trying to sort the output text.;Take action based on the accompanying message. If you get a=NO_WRK message, retry the command and specify the /WORK_FILES qualifier. N v %1V^v$HISTORY, Pat Nelson and John Lawson Utility7The idea for the Help Message facility was conceived by6OpenVMS writer Pat Nelson in 1991. She created a rough;prototype and recruited a volunteer to test it (then system:manager David Cantor). The code was written by John "Mage"Lawson.;The Help Message facility was introduced with OpenVMS Alpha;V1.0 in 1992 and has been a staple on all OpenVMS platforms9since. Best of all, it saves millions of trees with every>release now that message descriptions are available at the DCL7prompt instead of in a multi-volume, cumbersome manual.Use it and enjoy! N 91jr\/8UNVSTATUS, translation of symbol $STATUS is unavailable Utility7Help Message cannot translate the CLI symbol $STATUS to=determine the result of the last executed command. Either the>$STATUS symbol has been deleted, no command has been executed,4or the first and only command was aborted by Ctrl/Y.5Reissue the HELP/MESSAGE command and specify a search9string or the /STATUS or /FACILITY qualifier. The default7HELP/MESSAGE command will work properly when $STATUS is*available and a command has been executed. N 0O/1ai/OUTERR, error creating output file 'file-spec' Utility;Help Message cannot create the output file specified by the/OUTPUT qualifier..Take action based on the accompanying message. N <X/1mu;UPDERRS, errors encountered updating Help Message database Utility3A problem occurred while trying to insert or delete#information in a .MSGHLP$DATA file..Take action based on the accompanying message.N Ed,1v~DBADSTATUS, translation of symbol $STATUS has invalid format: 'text' Utility6The DCL symbol $STATUS contains something other than a,hexadecimal number in the form "%Xnnnnnnnn".+Retry the operation that created the error.N 1V/1bj0PAGINGERR, error returned from paging subsystem Utility9An error occurred while Help Message was trying to outputpaged data to the terminal..Take action based on the accompanying message.N .T/1_g-PARSE, unable to parse keyword search string UtilityMessage has been installed (for example, on a Japanese OpenVMSsystem)..Take action based on the accompanying message.N ju1?NOLIBRARIES, none of the specified libraries were found; check) logical name MSGHLP$LIBRARY Utility9The search path logical name MSGHLP$LIBRARY is defined to:point to a number of database files, none of which exists.9Verify that the logical name search path defines existing9Help Message database files, or deassign the logical name8so that Help Message accesses the default database file,$SYS$HELP:MSGHLP$LIBRARY.MSGHLP$DATA.N EGj1v~/DNOSUCHFAC, unknown facility name; use /FACILITY=? for complete list Utility2The requested facility name does not appear in the8specified messages database. By default, the database isA program called a MSGHLP routine while another code thread in3the same program was also calling a MSGHLP routine.Retry the operation.N d cQ1vCILLFSTCHR, illegal field type character 'character' encountered at line 'line-number' Utility=The specified line in a .MSGHLP file does not contain a 1, 2,3, 4, or 5 prefix.8Update the line to contain the correct numerical prefix: 1 - Message 2 - Facility 3 - Explanation 4 - User Action 5 - CommentN C@81qyU?MDFERR, error accessing Help Message database file 'file-spec' Utility7Help Message cannot access the named .MSGHLP$DATA file.3Take action based on the accompanying message. Some!possibilities to investigate are:;o Do you have write access for the named .MSGHLP$DATA file?8o Is the named .MSGHLP$DATA file included in the default< search path defined by logical name MSGHLP$LIBRARY or in a2 search path specified by the /LIBRARY qualifier?3o If you used the /LIBRARY qualifier to specify the1 .MSGHLP$DATA file, did you make a typing error?N TH, Mathematics FacL?1},INVARGMAT, invalid argument to math library user PC 'location'ility4One of the math procedures is called with an invalid argument.Correct the argument.N Op1 /LOGZERNEG, logarithm of zero or negative value user PC 'location'ility=An MTH log procedure is called with a 0 or a negative number.1The result returned is the reserved operand (-0).Correct the argument.N #>1ot!UNDEXP, undefined exponentiation user PC 'location'ility4An expression contains exponentiation that cannot be;mathematically evaluated; for example, 0.**0. The result isthe reserved operand (-0).Correct the math expression.N N`]1JO NOTIMP, not implementedility>An attempt was made to use a call, routine, or feature that is not implemented in this version.root of at least one negative number. The result returned is areserved operand (-0).:Correct the program so that all arguments are nonnegative.!!N (F1w|":%VEC_UNDEXP, undefined exponentiation user PC 'location'ility>An expression contains at least one vector exponentiation that:cannot be mathematically evaluated; for example, 0**0. The+result returned is a reserved operand (-0).Correct the expression.""N v M51~S-FLOOVEMAT, floating overflow in math library user PC 'location'ility9An overflow condition occurred during execution of a math>library procedure. This message results from an incorrect call>to the math library, and usually indicates that an argument istoo small or too large.4Correct the program where it calls the math library.##N  N+&1.FLOUNDMAT, floating underflow in math library user PC 'location'ility:An underflow condition occurred during execution of a math8library procedure and the caller is enabled for floatingBefore you can register more network services, you must remove9one or more network services using the SET NETWORK/REMOVEcommand.&&N EB1szAINCONSISTENT, logical names structure left in inconsistent stateCommand9An error that occurred while registering new services has8disrupted the logical names structure and caused data tobecome corrupted.9Deregister all network services using the DCL command SET7NETWORK/REMOVE. Then reregister the network services by7executing the SYS$STARTUP:SYS$NET_SERVICES.COM command.''N U1651bi0NOCONTROL, control characters are not permittedCommand5A control character was included in the text strings.4Remove all control characters from the text strings.((N `;531ls:NOTPERMITTED, qualifier 'qualifier-name' is not permittedCommand4The specified qualifier is invalid for this command.2Specify a valid qualifier and retry the operation.))N j=H81nuThe fatal error reported in an accompanying message caused thecommand to fail.,Correct the problem and retry the operation.,,N p,O1PhTIMEDOUT, operation timed outRT/STOP NETWORK Commands:The operation timed out because another user was using therequired resources.Try the operation again later.--N v6,eB1g&5WAIT, operation blocked by another user; please waitRT/STOP NETWORK Commands9The operation cannot be performed because another user is*modifying the network service information.:If you get the TIMEDOUT message, retry the operation againlater...N  HOW NETWORK9(Qc1Ya'CANTOPEN, cannot open file 'file-name' Command5An error was encountered while attempting to open thespecified file for output.=Ensure that the file exists in the current directory and that$you correctly specify the file name.//N (QF$1w:ENOAVAILABLE, network service information is unavailable at this time Command#No network services are registered.SERVICES.COM command is called from the SYS$STARTUP:SYSTARTUP_VMS.COM command procedure.00N ](101Ya'NOTFOUND, network 'name' was not found Command0The specified network service is not recognized./Check the network name and retry the operation.11N do\R1$vBSUPPRESSED, network-specific information suppressed due to output redirection Command;A secondary command directed to this network service is not=being executed because the /OUTPUT qualifier was specified toredirect the output.>If you wish to execute a secondary command, do not specify the/OUTPUT qualifier.22N w1;31bj0WRITEERR, error occurred writing to output file Command:An error was encountered while writing to the output file.2Take action based on the accompanying RMS message.33N ICONFIG, Ethernet C 4&O41ew3LOGIC, program logic error or unexpected conditiononfigurator Module>NICONFIG logic is unable to handle a condition or circumstanceit encountered.3This is a programming error and should be reported.44N  +&)_1\n*LOGIO, NICONFIG requires LOG_IO privilegeonfigurator Module(NICONFIG must run with LOG_IO privilege.virtual address space is exceeded or a program error occurred.7An invalid address or size for deallocation indicates aprogramming error.>>N i| @&F1q{?FAILGETVM, failed to allocate 'number' bytes of virtual memoryonfigurator Module=An error occurred when NICONFIG attempted to allocate virtualmemory.=Check the accompanying error message to determine whether the=virtual address space is exceeded or a program error occurred5(for example, an invalid address or allocation size).??N "&)_1Se!TMPMBX, NICONFIG requires TMPMBXonfigurator Module(NICONFIG must run with TMPMBX privilege.An error occurred when NICONFIG attempted to declare itself tothe network as a known object..Take action based on the accompanying message.AAN ,&)_1]o+NETMBX, NICONFIG requires NETMBX privilegeonfigurator Module(NICONFIG must run with NETMBX privilege.Cancel the mount verification, or remove the write lock on thevolume.EEN ,7%;1hy>6LOGFAIL, failed logfile operation on file 'file-spec'unication Process9The DCL command REPLY/LOG failed to create a new operator:communication log file. This message generally indicates afile system failure.:Accompanying messages indicate the reason for the failure.FFN  W%X1@LOGINIT, logfile initialized by operator 'file-spec' logfile is 'file-spec'unication Process6A DCL command REPLY/LOG successfully initialized a new operator communication log file.None.GGN %1N_LOGTIME, logfile time stampunication Process>This message, written periodically in the operator's log file,=indicates that the system is functioning properly at the time specified.None.HHN  #%j!1Te"ILLRQST, illegal operator requestunication Process;A DCL command REPLY is entered with no qualifiers, or a DCL-command REQUEST specifies an incorrect value. Correct and reenter the command.IIN &A R%18D'virtual-unit:' does not contain the member named to VMB. System may not rebootunication Process:Either of the following conditions can cause this message:;o The boot device is dismounted or failed out of the system disk shadow set.9o Shadowing finds the boot device missing from the system; disk shadow set membership during any dismount operations on the system disk.9Mount the boot device back into the shadow set as soon as=possible. If you cannot, change the device name in VMB so thesystem can reboot.JJN BF%<?1wESHUTDOWN, OPCOM shutting down. Requested by operator 'operator-name'unication Process;OPCOM is announcing the orderly shutdown of its activities.>Be aware that OPCOM will not be available to perform requests.KKN &Fv%4L18CWRONGVOL, 'date and time', device 'device-name' contains the wrong1 volume. Mount verification in progressunication Process3The volume in the drive is not the original volume.=Replace the original volume in the drive and cancel the mount verification.LLN G%wL1L] UNKNOPR, unknown operatorunication Process 1BSOPREPL, 'reply'unication Process=This is the operator's reply to a user's request or question.Take action based on the reply.PPN t6%1gxH5OPRNOTIF, operator notified, waiting.. 'system time'unication Process=The DCL command REQUEST is entered with the /REPLY qualifier;another message to the operator, or press Ctrl/Z to cancel therequest.QQN 7%H1hy6TERMDSBL, terminal disabled, operator 'operator-name'unication Process8A terminal is successfully disabled with the DCL commandREPLY/DISABLE.None.RRN 6%F1gx5TERMENAB, terminal enabled, operator 'operator-name'unication Process7A terminal is successfully enabled with the DCL command REPLY/ENABLE.None.SSN %%hC1Vg$TERMFAIL, failed to enable terminalunication Process4This message is a response to a REPLY/ENABLE request2indicating that your request to OPCOM is rejected.;Ask your system manager to give you OPER privilege, and tryagain.TTN _%I1CNOREMBROAD, no VAXcluster terminals were notified because OPCOM is not availableunication Process9A REPLY command attempting to send a message to terminals;on other nodes within an OpenVMS Cluster environment failed:because OPCOM is not available to satisfy the request. The4message is sent only to terminals on the local node.)Restart OPCOM with the following command: $ @SYS$SYSTEM:STARTUP OPCOMUUN T%1c>NOREMWAIT, /WAIT requested, therefore no VAXcluster terminals notifiedunication Process;A REPLY command attempted to send a message to terminals on:other nodes within an OpenVMS Cluster environment, but the>/WAIT qualifier was specified, which requests that the messagebe sent synchronously.6If the message must be delivered to terminals on otherMVABORTED, 'date-time', Mount verification aborted for device 'device-name'unication Process]%=t1PDREDCACHE, the file system buffer cache 'cache-name' is operating at reduced sizeunication Process9The specified disk volume, and possibly other volumes, is recommends that you accept the default values rather than set explicit values.; 2 If the volume is not your system disk, dismount it and remount it again.: If the volume is your system disk, reboot your system using AUTOGEN.; 3 If you still get REDCACHE error messages, repeat these5 steps until you do not get these error messages.]]N =%1n2CLUSCOMM, OPCOM on 'node-name1' is unable to communicate withB 'node-name2', csid 'cluster-ID', system 'SCS-system-ID'unication Process9The OPCOM process on the first named node cannot exchange;data with the OPCOM process on the second named node in the>cluster. This can occur if the second node is not available or!if there is a connectivity issue.*Notify the system manager for the cluster. }%G1 ACTLRUCODE, Microcode for device 'device-name' ('controller-name'? controller) is not up to the current revision levelunication Process>A more recent version of the microcode is needed for the nameddevice.>Refer to the documentation for the named device. If necessary,9contact the device provider for the latest version of the microcode. B%[1sADUPUNITNO, MSCP controller - duplicate unit number 'unit-number'unication Process8This message from the MSCP controller indicates that the!requested unit is already in use.This informational message from the OPCOM process on the first9named node indicates that the second named node is now an;active member of the cluster. An active member can interact3with OPCOM processes on other nodes in the cluster.None. %1CNODE_DEPARTED, OPCOM on 'node-name1' is deactivating 'node-name2',9 csid 'cluster-ID', system 'SCS-system-ID'< Node is no longer with us, placing node in DEPARTED state.unication Process;The OPCOM process on the first named node has detected that;the second named node is no longer part of the cluster. The;OPCOM process on the first node will not try to communicate0with the OPCOM process on the "departed" system.None. %1@NODE_INIT, OPCOM on 'node-name1' is initializing the local nodeC 'node-name2', csid 'cluster-ID', system 'SCS-system-ID'unication Process=The OPCOM process on the first named node has noticed the new;OPCOM process on the second named node and is going through:the initialization process required to allow the two OPCOM)processes to communicate with each other.None. %1=NODE_RETRY, OPCOM on 'node-name1' is trying again to talk toD 'node-name2', csid 'cluster-ID', system 'SCS-system-ID'unication Process3The OPCOM process on the first named node could not;communicate with the OPCOM process on the second named node8and is trying to re-establish communications. Either the9second node is unavailable or there is a problem with itsOPCOM process.Inform the system manager. %1ENODE_START, OPCOM on 'node-name1' recognizes node 'node-name2', csid1 'cluster-ID', system 'SCS-system-ID'B Attempting to establish communications, placing node in STARTING state.unication Process>The OPCOM process on the first named node sees that the secondpass along any relevant information found there to HP CustomerSupport. 6%R1gx5NOPERATOR, No operator coverage for request 'number'unication Process>No operator is enabled to handle the class associated with thespecified request.of the classes associated with the available operators, or one=of the operators must be enabled to handle the class that therequest asks for. (%<1Yj'NOTRQCB, data structure is not an RQCBunication Process;One of OPCOM's internal data structures has become corrupt.Contact HP Customer Support. C%O-1tBOPA0CLERR, "'name'" is not a valid class name in OPC$OPA0_CLASSESunication Process9An invalid class name was used when the logical OPC$OPA0_CLASSES was defined.>Notify the system manager. OPC$OPA0_CLASSES is usually defined9in SYS$MANAGER:SYLOGICALS.COM. The valid OPA0 class namesCLUSTER, SECURITY, LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5,7OPER6, OPER7, OPER8, OPER9, OPER10, OPER11, and OPER12. TC%ro1tfBVALUERR, error occurred while processing the command item 'value'unication Process8The value supplied to a qualifier in the command line is8invalid for the reason given in an accompanying message.:Take action based on the accompanying message. Reenter the3command specifying valid values for all qualifiers. %1yCWSINCLUSTER, The operator console and logfile will not be enabled.B Change OPC$OPA0_ENABLE & OPC$LOGFILE_ENABLE in SYLOGICALS.COM to enable them.unication Process=This system in the cluster is also a workstation (that is, it;has a graphics adapter), so by default the operator console&and operator log file are not enabled.4To enable the operator console or operator log file,6the logicals OPC$ENABLE_OPA0 and OPC$ENABLE_LOGFILE in;SYLOGICALS.COM must be defined as true. Once these logicals:are enabled, the operator console and log file are started6automatically at the next system startup. To start the:operator console manually, enter a REPLY/ENABLE command on9OPA0; enter a REPLY/LOG command to start the OPERATOR.LOGfile. %K1N_-NOSUCHRQST, no such requestunication Process3A DCL command REPLY specifies a nonexistent messageidentification number.;Reenter the command with the correct message number. If the;request is canceled by the user who issued it, no action is necessary. + +%%1\m=*DEVNOTERM, illegal source operator deviceunication Process6The DCL command REPLY requested a device that is not aDEVOFFLINX, 'date and time', Device 'device-name' is off line+ Mount verification in progressunication Process=The device is off line and mount verification is in progress.All I/O requests are stalled.9Cancel the mount verification or bring the volume back online.  %S1L]DEVONLINE, device on lineunication Process:This message is displayed on the operator's console when adevice becomes on line.None.cQ1vCILLFSTCHR, illegal field type character 'character' encountered at line 'line-number' Utility=The specified line in a .MSGHLP file does not contain a 1, 2,3, 4, or 5 prefix.8Update the line to contain the correct numerical prefix: 1 - Message 2 - Facility 3 - Explanation 4 - User Action 5 - CommentN C@81qyU?MDFERR, error accessing Help Message database file 'file-spec' Utility7Help Message cannot access the named .MSGHLP$DATA file.3Take action based on the accompanying message. Some!possibilities to investigate are:;o Do you have write access for the named .MSGHLP$DATA file?8o Is the named .MSGHLP$DATA file included in the default< search path defined by logical name MSGHLP$LIBRARY or in a2 search path specified by the /LIBRARY qualifier?3o If you used the /LIBRARY qualifier to specify the1 .MSGHLP$DATA file, did you make a typing error?N TH, Mathematics FacL?1},INVARGMAT, invalid argument to math library user PC 'location'ility4One of the math procedures is called with an invalid argument.Correct the argument.N Op1 /LOGZERNEG, logarithm of zero or negative value user PC 'location'ility=An MTH log procedure is called with a 0 or a negative number.1The result returned is the reserved operand (-0).Correct the argument.N #>1ot!UNDEXP, undefined exponentiation user PC 'location'ility4An expression contains exponentiation that cannot be;mathematically evaluated; for example, 0.**0. The result isthe reserved operand (-0).Correct the math expression.N N`]1JO NOTIMP, not implementedility>An attempt was made to use a call, routine, or feature that is not implemented in this version.root of at least one negative number. The result returned is areserved operand (-0).:Correct the program so that all arguments are nonnegative.!!N (F1w|":%VEC_UNDEXP, undefined exponentiation user PC 'location'ility>An expression contains at least one vector exponentiation that:cannot be mathematically evaluated; for example, 0**0. The+result returned is a reserved operand (-0).Correct the expression.""N v M51~S-FLOOVEMAT, floating overflow in math library user PC 'location'ility9An overflow condition occurred during execution of a math>library procedure. This message results from an incorrect call>to the math library, and usually indicates that an argument istoo small or too large.4Correct the program where it calls the math library.##N  N+&1.FLOUNDMAT, floating underflow in math library user PC 'location'ility:An underflow condition occurred during execution of a math8library procedure and the caller is enabled for floatingBefore you can register more network services, you must remove9one or more network services using the SET NETWORK/REMOVEcommand.&&N EB1szAINCONSISTENT, logical names structure left in inconsistent stateCommand9An error that occurred while registering new services has8disrupted the logical names structure and caused data tobecome corrupted.9Deregister all network services using the DCL command SET7NETWORK/REMOVE. Then reregister the network services by7executing the SYS$STARTUP:SYS$NET_SERVICES.COM command.''N U1651bi0NOCONTROL, control characters are not permittedCommand5A control character was included in the text strings.4Remove all control characters from the text strings.((N `;531ls:NOTPERMITTED, qualifier 'qualifier-name' is not permittedCommand4The specified qualifier is invalid for this command.2Specify a valid qualifier and retry the operation.))N j=H81nuThe fatal error reported in an accompanying message caused thecommand to fail.,Correct the problem and retry the operation.,,N p,O1PhTIMEDOUT, operation timed outRT/STOP NETWORK Commands:The operation timed out because another user was using therequired resources.Try the operation again later.--N v6,eB1g&5WAIT, operation blocked by another user; please waitRT/STOP NETWORK Commands9The operation cannot be performed because another user is*modifying the network service information.:If you get the TIMEDOUT message, retry the operation againlater...N  HOW NETWORK9(Qc1Ya'CANTOPEN, cannot open file 'file-name' Command5An error was encountered while attempting to open thespecified file for output.=Ensure that the file exists in the current directory and that$you correctly specify the file name.//N (QF$1w:ENOAVAILABLE, network service information is unavailable at this time Command#No network services are registered.SERVICES.COM command is called from the SYS$STARTUP:SYSTARTUP_VMS.COM command procedure.00N ](101Ya'NOTFOUND, network 'name' was not found Command0The specified network service is not recognized./Check the network name and retry the operation.11N do\R1$vBSUPPRESSED, network-specific information suppressed due to output redirection Command;A secondary command directed to this network service is not=being executed because the /OUTPUT qualifier was specified toredirect the output.>If you wish to execute a secondary command, do not specify the/OUTPUT qualifier.22N w1;31bj0WRITEERR, error occurred writing to output file Command:An error was encountered while writing to the output file.2Take action based on the accompanying RMS message.33N ICONFIG, Ethernet C 4&O41ew3LOGIC, program logic error or unexpected conditiononfigurator Module>NICONFIG logic is unable to handle a condition or circumstanceit encountered.3This is a programming error and should be reported.44N  +&)_1\n*LOGIO, NICONFIG requires LOG_IO privilegeonfigurator Module(NICONFIG must run with LOG_IO privilege.virtual address space is exceeded or a program error occurred.7An invalid address or size for deallocation indicates aprogramming error.>>N i| @&F1q{?FAILGETVM, failed to allocate 'number' bytes of virtual memoryonfigurator Module=An error occurred when NICONFIG attempted to allocate virtualmemory.=Check the accompanying error message to determine whether the=virtual address space is exceeded or a program error occurred5(for example, an invalid address or allocation size).??N "&)_1Se!TMPMBX, NICONFIG requires TMPMBXonfigurator Module(NICONFIG must run with TMPMBX privilege.An error occurred when NICONFIG attempted to declare itself tothe network as a known object..Take action based on the accompanying message.AAN ,&)_1]o+NETMBX, NICONFIG requires NETMBX privilegeonfigurator Module(NICONFIG must run with NETMBX privilege.Cancel the mount verification, or remove the write lock on thevolume.EEN ,7%;1hy>6LOGFAIL, failed logfile operation on file 'file-spec'unication Process9The DCL command REPLY/LOG failed to create a new operator:communication log file. This message generally indicates afile system failure.:Accompanying messages indicate the reason for the failure.FFN  W%X1@LOGINIT, logfile initialized by operator 'file-spec' logfile is 'file-spec'unication Process6A DCL command REPLY/LOG successfully initialized a new operator communication log file.None.GGN %1N_LOGTIME, logfile time stampunication Process>This message, written periodically in the operator's log file,=indicates that the system is functioning properly at the time specified.None.HHN  #%j!1Te"ILLRQST, illegal operator requestunication Process;A DCL command REPLY is entered with no qualifiers, or a DCL-command REQUEST specifies an incorrect value. Correct and reenter the command.IIN &A R%18D'virtual-unit:' does not contain the member named to VMB. System may not rebootunication Process:Either of the following conditions can cause this message:;o The boot device is dismounted or failed out of the system disk shadow set.9o Shadowing finds the boot device missing from the system; disk shadow set membership during any dismount operations on the system disk.9Mount the boot device back into the shadow set as soon as=possible. If you cannot, change the device name in VMB so thesystem can reboot.JJN BF%<?1wESHUTDOWN, OPCOM shutting down. Requested by operator 'operator-name'unication Process;OPCOM is announcing the orderly shutdown of its activities.>Be aware that OPCOM will not be available to perform requests.KKN &Fv%4L18CWRONGVOL, 'date and time', device 'device-name' contains the wrong1 volume. Mount verification in progressunication Process3The volume in the drive is not the original volume.=Replace the original volume in the drive and cancel the mount verification.LLN G%wL1L] UNKNOPR, unknown operatorunication Process 1BSOPREPL, 'reply'unication Process=This is the operator's reply to a user's request or question.Take action based on the reply.PPN t6%1gxH5OPRNOTIF, operator notified, waiting.. 'system time'unication Process=The DCL command REQUEST is entered with the /REPLY qualifier;another message to the operator, or press Ctrl/Z to cancel therequest.QQN 7%H1hy6TERMDSBL, terminal disabled, operator 'operator-name'unication Process8A terminal is successfully disabled with the DCL commandREPLY/DISABLE.None.RRN 6%F1gx5TERMENAB, terminal enabled, operator 'operator-name'unication Process7A terminal is successfully enabled with the DCL command REPLY/ENABLE.None.SSN %%hC1Vg$TERMFAIL, failed to enable terminalunication Process4This message is a response to a REPLY/ENABLE request2indicating that your request to OPCOM is rejected.;Ask your system manager to give you OPER privilege, and tryagain.TTN _%I1CNOREMBROAD, no VAXcluster terminals were notified because OPCOM is not availableunication Process9A REPLY command attempting to send a message to terminals;on other nodes within an OpenVMS Cluster environment failed:because OPCOM is not available to satisfy the request. The4message is sent only to terminals on the local node.)Restart OPCOM with the following command: $ @SYS$SYSTEM:STARTUP OPCOMUUN T%1c>NOREMWAIT, /WAIT requested, therefore no VAXcluster terminals notifiedunication Process;A REPLY command attempted to send a message to terminals on:other nodes within an OpenVMS Cluster environment, but the>/WAIT qualifier was specified, which requests that the messagebe sent synchronously.6If the message must be delivered to terminals on otherMVABORTED, 'date-time', Mount verification aborted for device 'device-name'unication Process]%=t1PDREDCACHE, the file system buffer cache 'cache-name' is operating at reduced sizeunication Process9The specified disk volume, and possibly other volumes, is recommends that you accept the default values rather than set explicit values.; 2 If the volume is not your system disk, dismount it and remount it again.: If the volume is your system disk, reboot your system using AUTOGEN.; 3 If you still get REDCACHE error messages, repeat these5 steps until you do not get these error messages.]]N =%1n2A string descriptor passed to a general library procedure does¬ contain a valid DSC$B_CLASS field.9Locate the call to the library that caused the error, and=initialize the field to the proper class of descriptor. Refer>to the run-time library documentation for a description of theclasses of descriptors. ()_`1Zc"(IO_CONCLO, I/O continued to closed file Facility>An attempt is made to perform I/O to a file being closed. Thiserror occurs only at AST level.=Correct the program so that AST-level routines do not perform!I/O on files that may be closing. L&91W`%WRONUMARG, wrong number of arguments Facility8Too many or too few arguments are specified in the call.5Recode to call the routine with the proper number and;selection of arguments. High-level language programmers who=have not issued a call directly to the routine should collect8supporting documentation, including the system traceback)listing, and contact HP Customer Support. $NH1U^#OUTCONERR, output conversion error Facility8The operation failed because the result would exceed thefixed-length string.1T]"INPCONERR, input conversion error Facility9There is an invalid character in the input string, or the8output value is not within the range of destination datatype.=Correct the input string or change the destination data type. <-g1^gN,USEFLORES, use of floating reserved operand Facilitywhen PATCH moves a VAX MACRO instruction that contains a labelto a patch area.None. 5"1ff4MEMBUG, dynmem error size='nn' addr='nn' error='nn'!An internal PATCH error occurred.;Keep a copy of the image file and the link map and note thean invalid operand for a destination field. For example, PATCH&does not accept the following command:"DEPOSIT/INSTRUCTION GO= 'BNEQ R0'.8Reenter the command, using a valid branch operand in thedestination field.  4G!1ee3SYNTAX, command syntax error at or near 'location'=A syntax error in a file name has been discovered in a CREATEcommand. Correct and reenter the command.  =1nn91ff4OLDINSCHK, memory location 'addr' not equal to 'xx'=The verification of the contents of the given address failed.8Reenter the PATCH command, specifying the correct value. <u91mm;BRTOOFAR, destination 'addr' is too far for branch operand;The relative displacement for the branch instruction is not8large enough to reach the specified destination address.8Correct the destination address and retry the operation. 5>91ff4OLDVALCHK, memory location 'addr' not equal to 'xx'=The verification of the contents of the given address failed.8Reenter the PATCH command, specifying the correct value. V1eCBADINITSZ, illegal size value, defaulting patch size to 'xxxxxxxx' bytes:The size-expression input argument did not fall within the=valid range. PATCH set the patch area to the address named in;the SET PATCH_AREA command, and used the default patch area(size to build the patch area descriptor.;Continue to enter patches into the user-defined patch area.;To see the current status of the patch area, enter the SHOWPATCH_AREA command. 4g1ee3NONCONTIG, non-contiguous image file being written=The image file being written by PATCH is not contiguous. This(error may be relevant to device drivers.None. # '1XXt&FRERANGE, storage package range errorAn internal error occurred.Contact HP Customer Support. #61gg?/5PREVINIT, patch area has previously been initialized>The patch area descriptor for the specified user-defined patch>area has previously been initialized. PATCH set the patch areaA command interpreter callback request failed due to the errorrepresented as 'xx'.Correct the error and retry. '1T1bb0PRIMOUT, error code of 'xx' parsing output file>A command interpreter callback request failed due to the errorrepresented as 'xx'.Correct the error and retry. ,QN21>MISSQUO, unmatched quotation marks in argument, closing quote assumed8Matching quotation marks or apostrophes were not used toenclose an argument.1Reenter the command, using the correct quotation.!! -,/1MMyINVCHAR, invalid character+The command contained an invalid character..Correct the character and reenter the command."" f11o1bb x0INVCHDABS, invalid command in /ABSOLUTE context7The command is invalid when patching a file in absoluteyou want to continue sharing the global section. The shareable.image must be reinstalled after it is patched.(( <6l!1gg5REPLACEERR, replacement value too large for location>When you replaced data with the PATCH command REPLACE, the new,data contained more bytes than the old data. Correct and reenter the command.)) >:N)1kk9MODIFYERR, modify error code of 'xx' on file 'file-spec'8An RMS $MODIFY request failed because of the error code,represented as 'xx'.(Correct the error and retry the request.** CT19MODNOTADD, insufficient symbol table space to add module 'module-name':The PATCH command SET MODULE failed. This typically occurs5when there is not enough space in the symbol table to#accommodate the additional modules.;To make room for the new modules, enter the following PATCH commands:;o SHOW MODULE command to determine which modules are in the symbol:o CANCEL MODULE command, specifying the module names whose symbols are no longer requiredo SET MODULE command++ QD%-1VV6c$NODECODE, cannot decode instruction1UU#RESOPCODE, opcode 'xx' is reserved=An opcode was specified that is reserved for Compaq use only.None.11 BYz1PPTINVDSTREC, invalid DST record=An invalid debug symbol table record is encountered. This can;be caused by a DEPOSIT to a random location, or it can be acompiler error.>Contact HP Customer Support unless the applications program or:a DEPOSIT command has altered a debug symbol table record.22 Z 2e]1cc%1EXPSTKOVR, expression too nested, stack overflow;An attempt was made to evaluate an expression that contains(more than 16 levels of nested arguments.=Remove levels of nested arguments until you have 16 levels orfewer and retry the operation.33 a 6V41gg5EXTBIT, illegal extract bit number - greater than 31invalid addressing modes, invalid syntax, not enough operands,or too many operands.#Determine the cause of the problem.99 u ;O1ll:DUPCOMFIL, command file 'file-spec' already being written:A request was made that a command procedure be written forthis PATCH session.None.:: z,B1]]+OPSYNTAX, instruction operand syntax error4There is a syntactical error in an operand within an instruction.Correct the syntax and retry.;; !|?{H1pp3>INVIMGHDR, inconsistent debug and symbol data in image header4The image header inconsistently describes the symbol9information, causing the absence of symbol information at PATCH time.>Relink the image. If the problem persists, contact HP CustomerSupport.<< 'E/1XX&JNLPUT, error writing to journal file>An output error occurred while PATCH is writing to the journalfile..Take action based on the accompanying message.== L1@1bb^0NOTPATADR, patch address is 'addr1' not 'addr2'4The incorrect starting address of the patch area was specified.;To determine the correct starting address, enter either the;PATCH command SHOW PATCH_AREA or ALIGN/BYTE. When you enter:ALIGN/BYTE, PATCH defines a symbol as the current startingaddress.>> R8S1iid7NORELOC, relocation of CASE instructions not supported2The Patch utility does not automatically move CASEinstructions to the patch area.0CASE instructions may be moved to the patch area.by using PATCH commands DELETE/INSTRUCTION and6DEPOSIT/INSTRUCTION/PATCH_AREA and the MACRO assemblerdirective .WORD.?? 1Z"1bb0TEROUT, error code of 'xx' parsing command file>A command interpreter callback request failed due to the errorcode cited in the message.!Correct the error code and retry.@@ (<!1YY'CLIERR, cli error parsing command line;The command line that invokes PATCH is incorrectly entered. Correct and reenter the command.AA @U<1qq?MULTECO, multiple eco levels ('nn' and 'nn') set for one patch7An attempt was made to define a second ECO level beforesetting the first ECO level.;To set the first ECO level, enter the PATCH command UPDATE.BB g AY1rr y@DATTOOLNG, length of new data may not exceed length of old data5This error is returned when patching in absolute mode;(PATCH/ABSOLUTE), and the length of the data being inserted;is longer than that of the data to be replaced in the file.=Make sure that the data to be inserted is equal to or shorterthan the data in the file.CC 4"1ee3OUTCMDLNG, output command line too long for buffer!An internal PATCH error occurred.Contact HP Customer Support.DD  8F1ii7INITPRS, error code of 'xx' on command line parse initparticular ECO level was not included in the qualifier's valuelist.=Add the ECO level to the qualifier's value list; retry if youwant this ECO to be applied.GG 69}1gg5MULTOPR, multiple successive operators in expression8An expression containing adjacent operators was entered.;Use angle brackets or parentheses, depending on the current4language, to separate the operators or enter a valid expression.HH #"1TTv"NOFREE, no free storage available!An internal PATCH error occurred.Contact HP Customer Support.II 21cc1NOGBL, some or all global symbols not accessible3When you initialized PATCH, either no global symbol9information was available to PATCH or the symbol table is8not large enough to incorporate all of the global symbol information.9To ensure that global symbol information is passed to the=Patch utility, reassemble or recompile and link your program,5including the OpenVMS Debugger or Traceback facility.JJ  21cc1ECONOTSET, eco level 'nn' not set in 'file-spec'=An ECO level was specified that is not set in that particular>image file. This typically occurs when the PATCH command CHECK/ECO is entered before the PATCH command UPDATE.=Enter a SET ECO command to reenable the Patch utility command7processing. Specify the correct ECO level and retry the operation.KK  3Ts1dd+2ECOSET, eco level 'nn' already set in 'file-spec'Correct the path name according to path name rules, and retry.SS ""1SSu!PARSEERR, internal parsing error!An internal PATCH error occurred.Contact HP Customer Support.TT V8?1ii)h7NOUPDATE, no patch for update qualifier eco level 'nn'>When a command procedure is submitted for interactive or batch:execution (by entering PATCH/UPDATE = (eco-level,...)), an:ECO level is specified that is not included in the command procedure.>Check your command procedure for correct ECO levels and retry.UU  6T1gg5ENDPRS, error code of 'xx' on command line parse end>A command interpreter callback request failed due to the errorrepresented as 'xx'.Correct the error and retry.VV ( USa1:CINSUFPAT, 'nn' bytes requested, patch area at 'addr' contains 'nn' bytes>The user-defined patch area is not large enough to accommodatethe specified code.;Use an alternate patch area; for example, the default patch$area, which is generally expandable.WW =-P1^^O,NOLCL, image does not contain local symbols;When PATCH was initialized, no local symbol information wasavailable to PATCH.;To ensure that local symbol information is passed to PATCH,marks or apostrophes when you were not in INSTRUCTION or ASCIImode.7Remove the quotation marks or apostrophes and retry the>operation, or, if you are entering instructions or ASCII data,indicate this in the command.[[ (="1YY'PATHTLONG, too many qualifiers on nameK1``.NOSUCHMODU, no such module name 'module-name'=The specified module name is not contained in the image file.>Retry the operation, specifying a module name contained in the image file.^^ ,F51]]+NSADDR, address 'addr' is not within image9An address was specified outside the address range of the image file.4Retry the operation, specifying the correct address.__ 'H91XX&NOACCESS, cannot access image section;An address contained in an image section is not within this image file.8Retry, specifying an address contained in an image file.`` 1X1bb0SECOUT, error code of 'xx' parsing journal file1cc1BADECO, illegal eco level of 'nn' in 'file-spec'"An illegal ECO level is specified.=Retry using a legal ECO level (between 1 and 128, inclusive).bb G]1LLNOSUCHSYM, no such symbol8A symbol is specified that is not contained in the PATCH symbol table.7Use the Patch utility command SET MODULE to bring local$symbols into the PATCH symbol table.cc R11bbd0NOANGLE, unmatched angle brackets in expression;An expression has an unequal number of right angle brackets:and left angle brackets, or the brackets are not correctly positioned.Add the required module to the utility's symbol table with the7SET MODULE command, or specify the correct symbol name.ee 65@1gg5NUMOPRNDS, 'xx' instructions must have 'nn' operands4An operand is omitted from the MACRO-11 instruction.5Reenter the command with the correct number ('nn') of operands.ff b1MMNUMTRUNC, number truncated;The Patch utility truncated a numeric data entry because it%exceeded the length of the data type.None.gg 4Y11ee3NUMVAL, error code of 'xx' requesting update value>A command interpreter callback request failed due to the errorcode represented as 'xx'.0Retry the request, using the correct error code.hh CSI, POLYCENTER Sof,.Q/1]w+NOVALDONE, cannot validate 'kit-file-name'tware Installation Utility6The POLYCENTER Software Installation utility could notvalidate the product kit..Take action based on the accompanying message.ii b.1JBRMDISABLED, recovery mode is not supported for this operation and has been disabledtware Installation Utility7Recovery mode has been disabled because the product was=installed on an ODS-5 volume, but the system volume is ODS-2.;Recovery mode is enabled by default for PRODUCT INSTALL and:PRODUCT RECONFIGURE operations. Recovery mode restores the=system environment if the operation is terminated prematurelyHPC or CDSA product. If necessary, contact your system managerfor assistance.kk E.!t1v%DABORT, operation terminated due to an unrecoverable error conditiontware Installation Utility An unrecoverable error occurred.;A message or messages preceding this one describe the error7condition. Correct the problem and retry the operation.ll b.11DAPLINVKIT, APPLY TO statement is valid only for kit types PATCH and MANDATORY UPDATEtware Installation Utility:An APPLY TO statement occurs in a product description file8(PDF) of a full, partial, operating system, platform, ortransition kit.:Either remove the APPLY TO statement or change the product:distribution kit type in the PRODUCT statement to PATCH orMANDATORY UPDATE.mm i.1a'EAPPLYTOERR, maintenance product 'product-name', applies to a product" that is not installedtware Installation Utility;You attempted to apply a mandatory update or patch kit to a9product that either is not installed on your system or is6installed, but does not have the prerequisite version.:Verify that you have the correct mandatory update or patchversion of the product you want to modify is already installedon the system.nn $[.16BCANCEL_WIP, termination resulted in an incomplete modification to the systemtware Installation Utility9You interrupted an operation that was executing, possibly>leaving the system in an incomplete state. For example, if you;interrupt an installation in progress, the utility does not-remove any files created by the installation.;HP recommends that you do not interrupt POLYCENTER Software5Installation utility operations. To recover from this:condition, you may need to reinstall the affected product.oo 7 >.Sm1oI=CONREMOS, confirm removal of operating system 'product-name'tware Installation Utility6This message asks you to confirm whether to remove thespecified operating system.;Answer Yes to confirm that you want to remove the operating0system, or answer No to terminate the operation.est and sendanother message.r handling and the /OVERRIDE=NO_FORCED_ERRORqualifier was not specified.=Specify the /OVERRIDE=NO_FORCED_ERROR qualifier and retry the operation. |<J  PCSI, POLYCENTER Sof /.6Z1`z .DBINUSE, product database in use; waiting ...tware Installation Utility5Another user is accessing the product database (PDB).>None. The utility processes your request when the current useris finished using the PDB. b.[1CERRNOAPPLY, APPLY TO statement is required for kit types PATCH and MANDATORY UPDATEtware Installation Utility;You are using a mandatory update or patch kit that does notcontain an APPLY TO statement.9Add an APPLY TO statement to the product description file<(PDF). A mandatory update or patch kit must name the product%to which the patch or update applies. qf.w[1(DERRPDFPRD, product description file name does not match information in PRODUCT statementtware Installation UtilityTake action based on the accompanying messages. If you specify:the /TRACE qualifier when you retry the operation, you can7view the commands sent to the subprocess and the output+generated when these commands are executed. G?.1p{Y>EXEINSFAIL, product supplied EXECUTE INSTALL procedure failedtware Installation Utility7A command procedure from the product kit (executed in aTake action based on the accompanying messages. If you specify:the /TRACE qualifier when you retry the operation, you can7view the commands sent to the subprocess and the output+generated when these commands are executed. KA.1r]@EXEPOUFAIL, product supplied EXECUTE POST_UNDO procedure failedtware Installation Utility7A command procedure from the product kit (executed in aTake action based on the accompanying messages. If you specify:the /TRACE qualifier when you retry the operation, you can7view the commands sent to the subprocess and the output+generated when these commands are executed. QD.1ucCEXEPRCFAIL, product supplied EXECUTE PRECONFIGURE procedure failedtware Installation Utility7A command procedure from the product kit (executed in aEXECUTE PRECONFIGURE statement in the product description file(PDF).>Take action based on the accompanying messages. If you specify:the /TRACE qualifier when you retry the operation, you can7view the commands sent to the subprocess and the output+generated when these commands are executed. I@.1q}[?EXEPRUFAIL, product supplied EXECUTE PRE_UNDO procedure failedtware Installation Utility7A command procedure from the product kit (executed in aTake action based on the accompanying messages. If you specify:the /TRACE qualifier when you retry the operation, you can7view the commands sent to the subprocess and the output+generated when these commands are executed. OC.1taBEXEPSTFAIL, product supplied EXECUTE POSTINSTALL procedure failedtware Installation Utility7A command procedure from the product kit (executed in aTake action based on the accompanying messages. If you specify:the /TRACE qualifier when you retry the operation, you can7view the commands sent to the subprocess and the output+generated when these commands are executed. G?.1p{Y>EXERELFAIL, product supplied EXECUTE RELEASE procedure failedtware Installation Utility7A command procedure from the product kit (executed in aTake action based on the accompanying messages. If you specify:the /TRACE qualifier when you retry the operation, you can7view the commands sent to the subprocess and the output+generated when these commands are executed. E>.1oyW=EXERMVFAIL, product supplied EXECUTE REMOVE procedure failedtware Installation Utility7A command procedure from the product kit (executed in aTake action based on the accompanying messages. If you specify:the /TRACE qualifier when you retry the operation, you can7view the commands sent to the subprocess and the output+generated when these commands are executed. C=.1nwUTake action based on the accompanying messages. If you specify:the /TRACE qualifier when you retry the operation, you can7view the commands sent to the subprocess and the output+generated when these commands are executed. A<.1muS;EXESTPFAIL, product supplied EXECUTE STOP procedure failedtware Installation Utility7A command procedure from the product kit (executed in aTake action based on the accompanying messages. If you specify:the /TRACE qualifier when you retry the operation, you can7view the commands sent to the subprocess and the output+generated when these commands are executed. G?.1p{Y>EXEUPGFAIL, product supplied EXECUTE UPGRADE procedure failedtware Installation Utility7A command procedure from the product kit (executed in aTake action based on the accompanying messages. If you specify:the /TRACE qualifier when you retry the operation, you can7view the commands sent to the subprocess and the output+generated when these commands are executed.  b.G1BFAILCONF, failed to resolve conflicting requirements for 'object- type' 'object-name'tware Installation Utility;More than one product supplies a managed object of the same7name, type, and scope. They cannot coexist because of aDetermine which product's managed object you want to preserve,9and make the necessary adjustments to the system. Use the;PRODUCT SHOW OBJECT/FULL 'object-name' command to determine8if an installed product has already provided the managedDetermine which product's managed object you want to preserve,9and make the necessary adjustments to the system. Use the;PRODUCT SHOW OBJECT/FULL 'object-name' command to determine8if an installed product has already provided the managed#9.1jJP8FORCEDDES, product 'product-name' implicitly deselectedtware Installation Utility8The named product has been implicitly deselected so that6it will not participate in the current operation. Thisexample, when another product being installed has a dependency;requirement for a different version of the product named inTake action based on the accompanying messages. If you specify:the /TRACE qualifier when you retry the operation, you can(view the command sent to the subprocess. (d.1EINVDSTFLD, destination specification cannot contain file name, type, or version fieldstware Installation Utility7The destination specification you used with the PRODUCT;command illegally contained a file name, file type, or file=version field. The /DESTINATION qualifer (or the logical nameyour current default device is used. If you omit the directory)name, the directory [VMS$COMMON] is used.INVDSTNOD, destination specification cannot contain node nametware Installation Utility7The destination specification you used with the PRODUCT9command contained a node name. The PRODUCT command cannot5install a product on another node in the network; the9destination device must be a locally accessible disk. Theremote node and perform the installation from there. Note that=the /SOURCE qualifier can specify the location of the product#kit on another node in the network. *B.r1slAINVLVN1, 'device' has invalid logical volume name 'logical-name'tware Installation Utility:The destination device for the operation has an associated9logical volume name that contains characters that are not:supported by the POLYCENTER Software Installation utility.=When a device is mounted, the MOUNT utility assigns a logical9name to the device. By default, the equivalence string of:this logical name takes the form DISK$volume-name, but youvolume name for a mounted device by entering the following DCLcommand:6 WRITE SYS$OUTPUT F$GETDVI("device-name","LOGVOLNAM") }+'.B1Xr&INVSPIDST, invalid destination devicetware Installation Utility4This error can occur under either of two conditions:6o You specified the logical name PCSI$DESTINATION or a9 /DESTINATION qualifier containing a device name that is not known to the system.8o The logical volume name in the product database for an8 installed product no longer refers to a device that is7 known to the system, or the logical name is no longer9 defined. Note that the destination device string in the= product database is used on PRODUCT REMOVE, PRODUCT INSTALL; (when performing an upgrade of an installed product), and PRODUCT RECONFIGURE commands.8Check the accompanying message to determine which device7string is in error. If you used this device name in the:/DESTINATION qualifier or as the equivalence string of the:logical name PCSI$DESTINATION, correct it, and reenter the;command. If the erring device name is a logical device name=read from the product database, use a SHOW LOGICAL command to9verify that the name is defined; if so, determine whether6the name refers to a known device. Define this logical9appropriately and reenter the command. Examine the output:from the following command to determine the logical volumebut you can specify any string as an optional parameter on the;MOUNT command. The destination device you specified for the>PRODUCT command using either the /DESTINATION qualifier or thevolume name for a mounted device by entering the following DCLcommand:6 WRITE SYS$OUTPUT F$GETDVI("device-name","LOGVOLNAM") -?.61pz>INVSPIDST2, destination volume must be a locally mounted disktware Installation Utility8The destination device that you specified in the PRODUCT7command using the /DESTINATION qualifier or the logical;name PCSI$DESTINATION does not identify a mounted disk that7is local to the machine on which you are performing the operation.=Change the destination specification to refer to a local disk8and reenter the command. To install a product on another8node, you must log in to the remote node and perform the:installation from there. You can use the /SOURCE qualifier=to specify the location of the product kit on another node in the network. .d.11DINVSPIDST3, destination volume is not formatted in Files-11 On-Disk Structure Level 2tware Installation Utility8The destination device that you specified in the PRODUCTPCSI$DESTINATION does not identify a disk that is formatted in#Files-11 On-Disk Structure Level 2.;Either specify another disk on which to install the product;or reinitialize the disk to reformat it in Files-ll On-Disk0Structure Level 2 before retrying the operation. /_. 1CINVSRCFLD, source specification cannot contain file name, type, or version fieldstware Installation Utility:The source specification you used with the PRODUCT command;contains a file name, file type, or file version field. The:/SOURCE qualifer (or the logical name PCSI$SOURCE) is used:to specify the device and directory where software product>kits are stored. The PRODUCT command searches this location to=find all product kits. A common mistake is to include in this=specification the name of the product kit (that is, the .PCSIReenter the PRODUCT command using the logical name PCSI$SOURCE:or the /SOURCE qualifier containing only a device name and;directory name. If more than one product kit matches all of=the selection criteria on the command line, you will be given(a menu of products from which to choose. 0V.1DCMODDELERR, error deleting module 'module-name' from library 'file- name'tware Installation UtilityTake action based on the accompanying messages. If you specify:the /TRACE qualifier when you retry the operation, you can(view the command sent to the subprocess. 5m.m1B?INVREMDST, remote destination must be mounted privately by the, process performing the operationtware Installation Utility;The POLYCENTER Software Installation utility tried to place=material on a volume whose owner is not the same as the ownerof the process.8Privately mount the destination volume so that only your3process has access to it; then retry the operation.!! B6;.1lvT:IVPFAILURE, test procedure completed with an error statustware Installation Utilitycompleted with an exit status that indicates a failure. If you>were executing a PRODUCT INSTALL command, the product has been4completely installed, but its test procedure failed.>Take action based on the accompanying messages. If you specify:the /TRACE qualifier when you retry the operation, you can7view the commands sent to the subprocess and the output+generated when these commands are executed."" \7U.1n@IVPINSTALL, product is installed, but its verification test has failedtware Installation Utilitycompleted with an exit status that indicates a failure. If you>were executing a PRODUCT INSTALL command, the product has been4completely installed, but its test procedure failed.>Take action based on the accompanying messages. If you specify:the /TRACE qualifier when you retry the operation, you can7view the commands sent to the subprocess and the output+generated when these commands are executed.## 9Y./1None. The POLYCENTER Software Installation utility attempts toresolve the conflict.'' q=w.lU1.EMULOBJNNM, the 'object-type' (unnamed) is multiply defined; conflict0 resolution may occur on installationtware Installation Utility:More than one managed object of the same name and type was0specified in the product description file (PDF).>None. The POLYCENTER Software Installation utility attempts toresolve the conflict.(( >4.M+1e3MULUPGRADE, multiple UPGRADE statements were foundtware Installation Utility9The product description file (PDF) contains more than oneUPGRADE statement.*Use only one UPGRADE statement in the PDF.)) CV.r10CZEROREF, product 'product-name' is no longer referenced by another producttware Installation Utility9At the completion of the current operation, the reference=count for this product will be zero. This means that no other=installed products have identified this product as a softwareCheck the product database and your command to verify that you,are trying to update a known managed object.00 L.sP1Hb%PDFEND, unmatched endtware Installation Utility:You specified a group statement in the product description7file (PDF) without a corresponding END group statement.4Check the group statements in the PDF for missing orextraneous END statements.11 M .sI1Qk'PDFEOF, unexpected end of filetware Installation Utility:You specified a group statement in the product description7file (PDF) without a corresponding END group statement.=Check the group statements in the PDF and add the missing END statement.22 NS.1h?PDFMST, missing semicolon or inappropriate construct preceding semicolontware Installation Utility6A product description language (PDL) statement in your;product description file (PDF) contains invalid syntax. The;most likely cause of the problem is a statement that is notterminated by a semicolon.;Review the PDL statement displayed with this error message.=If the line identified ends in a semicolon, look at preceding6statements in the source file for a missing semicolon.33 O:.|#1k$9PDFMTX, duplicate or mutually exclusive option specifiedtware Installation Utility>You either specified an option twice or specified incompatibleTake action based on any accompanying error messages and retrythe operation.66 T%.A31Vp$PRDALRREM, product has been removedtware Installation Utility7You attempted to remove a product that has already beenremoved.2Verify the name of the product you want to remove.77 UV.p1>BPRDSTAABS, operation is invalid on product 'product-name' that is absenttware Installation Utility>You attempted to perform an operation on a product that is not>installed on the system or is not accessible to the POLYCENTERSoftware Installation utility.;Verify that you are attempting the operation on the correct3product. If necessary, install the correct product.88 !Y7.Le1h36PTFDUPMOD, duplicate module name in product text filetware Installation Utility:More than one text module has the same name in the producttext file (PTF)..MM1o#=PTFINVMOD, invalid module header syntax in product text filetware Installation Utility>A text module header in the product text file (PTF) contains a syntax error.;Correct the syntax of the text module header and the modulename in the PTF.;; \?.Z>1p">PTFINVPRM, invalid parameter line syntax in product text filetware Installation Utilitygiven in the PRODUCT statement of the product description file(PDF).PTFMISMAT3, product name in =PRODUCT directive does not match5 corresponding field in PRODUCT statementtware Installation Utility>The product name in the =PRODUCT directive line of the productgiven in the PRODUCT statement of the product description file(PDF).:Correct your PTF and PDF files so that the version stringsmatch.Jaq.A1s:PTFMISMAT5, kit type in =PRODUCT directive does not match5 corresponding field in PRODUCT statementtware Installation Utility7The kit type name in the =PRODUCT directive line of the8product text file (PTF) does not match the kit type name9given in the PRODUCT statement of the product description file (PDF).9Correct your PTF and PDF files so that the kit type namesmatch.Jbv.A1x?PTFMISMAT6, language code in =PRODUCT directive does not match5 corresponding field in PRODUCT statementtware Installation Utility7The language code in the =PRODUCT directive line of the8product text file (PTF) does not match the language code9given in the PRODUCT statement of the product description file (PDF).9Correct your PTF and PDF files so that the language codesmatch.Jcu.@1u>PTFMISMAT7, country code in =PRODUCT directive does not match5 corresponding field in PRODUCT statementtware Installation Utility>The country code in the =PRODUCT directive line of the productReview the matching statement types in the product descriptionmodule that is not used by the product description file (PDF).6The PRODUCT PACKAGE operation ignored this definition.;This message alerts you that a module defined in the PTF isThe first line of the product text file (PTF) does not containan =PRODUCT directive."Correct the first line of the PTF. J~iE.q1vDPTFUNDMOD, module 'module-name' is not defined in product text filetware Installation Utility9A text module header in the product text file (PTF) has aREMRUNOS, cannot remove the running operating system; product skippedtware Installation Utility:You attempted to remove the operating system without firstshutting it down.:Shut down the operating system, privately mount the system5disk for exclusive use by your process, and retry the&operation using the /REMOTE qualifier.Jnp.01ARETAIN, 'object' 'object-name' was not replaced because 'object'- from kit has lower generation numbertware Installation Utility:During installation of a software product (or a patch to a;software product), the specified object (either a file or a>library module) was not copied from the kit to the destinationdependencies; for example, product A requires product B, whichrequires product A.Jmp[.pi1ASFTCNFINS, installed product 'product-name' does not satisfy all dependenciestware Installation Utility4The specified installed product does not satisfy the:constraints of a software statement in a selected product.Certain selected or installed products have constraints on thenamed product.None.JKrZ.rF1]@SFTCNFSEL, selected product 'product-name' does not satisfy all dependenciestware Installation Utilitynot found in the source directory. It is not yet known if thisAnswer Yes to the accompanying question if you wish to proceed=with the installation. If the software dependency is a "hard";reference (that is, it is not the result of a configurationoption, the option will be disabled and will not be presented.SFTREFREM, referenced product 'product-name' was removed from product databasetware Installation Utility:The named, referenced product was removed from the product8database or, in some operations, the POLYCENTER Software3Installation utility will ask whether to remove it.You attempted to upgrade a product using a partial product kit>for which the prerequisite prior version of the product is not>installed. A partial product kit cannot be installed alone; it:can be used only to upgrade a currently installed product.=Review the release notes for the product you want to install.=Install the prerequisite full kit for the product, then retry$the installation of the partial kit.J}^.221 DUPGRADERR, existing version of product that 'product-name' upgrades is incorrecttware Installation Utility7The named product has an UPGRADE statement that directs:the POLYCENTER Software Installation utility to upgrade an:existing version of the same product. The existing version9fails to meet the version constraints of the new product.is meant for HP internal use and is not a supported version of&the product (not even for field test).8This message warns that you are attempting to install orThe POLYCENTER Software Installation utility creates a product>kit file of type .PCSI with fixed-length records of 8192 bytes:and a compressed product kit file of type .PCSI$COMPRESSED:with fixed-length, 512-byte records. When product kits are9copied over the Internet or temporarily stored on systems9other than OpenVMS and then copied to OpenVMS, their file8attributes sometimes are not preserved. This can prevent;the POLYCENTER Software Installation utility from using RMS8services to access these files, expecially if the record)format is stream instead of fixed-length.'None. This is an informational message.!!J,.U1]w+CANNOTVAL, cannot validate 'kit-file-name'tware Installation Utility6The POLYCENTER Software Installation utility could not:validate the product kit. This is an informational message=and does not signal an error. It indicates that the kit might;not have gone through the optional signing process that was"introduced in OpenVMS Version 8.3.indicates it is a manifest file for the kit. This file has the>same file name and file type of the product kit with "_ESW" or="_HPC" appended to the file type. No attempt has been made to:validate this kit because it is marked as an unsigned kit.7Answer No to the question that follows to terminate the:operation. Try to determine why the "*.*_ESW" or "*.*_HPC"CNOCDSARTN, failed to load a required CDSA file validation routine:tware Installation Utility7The product kit is signed but it could not be validated=because the CDSA product is not installed, or it is installed=but not started. A required CDSA shareable image could not beloaded into memory.7Answer No to the question that follows to terminate the8operation. Contact your system manager for assistance in;getting CDSA operational. Alternatively, you can answer Yes9to proceed with the operation without validating the kit.$$J'B.1sS9ANOHPCRTN, failed to load a required HPC file validation routine:tware Installation Utility7The product kit is signed but it could not be validatedThe product kit could not be validated because it has not gone:through a signing process to create a manifest file with aThis is an informational message and does not signal an error.9Kit signing is an optional feature that was introduced inOpenVMS Version 8.3.None required. command;contains a file name, file type, or file version field. The:/SOURCE qualifer (or the logical name PCSI$SOURCE) is used:to specify the device and directory where software product>kits are stored. The PRODUCT command searches this location to=find all product kits. A common mistake is to include in this=specification the name of the product kit (that is, the .PCSIReenter the PRODUCT command using the logical name PCSI$SOURCE:or the /SOURCE qualifier containing only a device name and;directory name. If more than one product kit matches all of=the selection criteria on the command line, you will be given(a menu of products from which to choose. 0V.1DCMODDELERR, error deleting module 'module-name' from library 'file- name'tware Installation UtilityTake action based on the accompanying messages. If you specify:the /TRACE qualifier when you retry the operation, you can(view the command sent to the subprocess. 5m.m1B?INVREMDST, remote destination must be mounted privately by the, process performing the operationtware Installation Utility;The POLYCENTER Software Installation utility tried to place=material on a volume whose owner is not the same as the ownerof the process.8Privately mount the destination volume so that only your3process has access to it; then retry the operation.!! B6;.1lvT:IVPFAILURE, test procedure completed with an error statustware Installation Utilitycompleted with an exit status that indicates a failure. If you>were executing a PRODUCT INSTALL command, the product has been4completely installed, but its test procedure failed.>Take action based on the accompanying messages. If you specify:the /TRACE qualifier when you retry the operation, you can7view the commands sent to the subprocess and the output+generated when these commands are executed."" \7U.1n@IVPINSTALL, product is installed, but its verification test has failedtware Installation Utilitycompleted with an exit status that indicates a failure. If you>were executing a PRODUCT INSTALL command, the product has been4completely installed, but its test procedure failed.>Take action based on the accompanying messages. If you specify:the /TRACE qualifier when you retry the operation, you can7view the commands sent to the subprocess and the output+generated when these commands are executed.## 9Y./1None. The POLYCENTER Software Installation utility attempts toresolve the conflict.'' q=w.lU1.EMULOBJNNM, the 'object-type' (unnamed) is multiply defined; conflict0 resolution may occur on installationtware Installation Utility:More than one managed object of the same name and type was0specified in the product description file (PDF).>None. The POLYCENTER Software Installation utility attempts toresolve the conflict.(( >4.M+1e3MULUPGRADE, multiple UPGRADE statements were foundtware Installation Utility9The product description file (PDF) contains more than oneUPGRADE statement.*Use only one UPGRADE statement in the PDF.)) CV.r10CZEROREF, product 'product-name' is no longer referenced by another producttware Installation Utility9At the completion of the current operation, the reference=count for this product will be zero. This means that no other=installed products have identified this product as a softwareCheck the product database and your command to verify that you,are trying to update a known managed object.00 L.sP1Hb%PDFEND, unmatched endtware Installation Utility:You specified a group statement in the product description7file (PDF) without a corresponding END group statement.4Check the group statements in the PDF for missing orextraneous END statements.11 M .sI1Qk'PDFEOF, unexpected end of filetware Installation Utility:You specified a group statement in the product description7file (PDF) without a corresponding END group statement.=Check the group statements in the PDF and add the missing END statement.22 NS.1h?PDFMST, missing semicolon or inappropriate construct preceding semicolontware Installation Utility6A product description language (PDL) statement in your;product description file (PDF) contains invalid syntax. The;most likely cause of the problem is a statement that is notterminated by a semicolon.;Review the PDL statement displayed with this error message.=If the line identified ends in a semicolon, look at preceding6statements in the source file for a missing semicolon.33 O:.|#1k$9PDFMTX, duplicate or mutually exclusive option specifiedtware Installation Utility>You either specified an option twice or specified incompatibleTake action based on any accompanying error messages and retrythe operation.66 T%.A31Vp$PRDALRREM, product has been removedtware Installation Utility7You attempted to remove a product that has already beenremoved.2Verify the name of the product you want to remove.77 UV.p1>BPRDSTAABS, operation is invalid on product 'product-name' that is absenttware Installation Utility>You attempted to perform an operation on a product that is not>installed on the system or is not accessible to the POLYCENTERSoftware Installation utility.;Verify that you are attempting the operation on the correct3product. If necessary, install the correct product.88 !Y7.Le1h36PTFDUPMOD, duplicate module name in product text filetware Installation Utility:More than one text module has the same name in the producttext file (PTF)..MM1o#=PTFINVMOD, invalid module header syntax in product text filetware Installation Utility>A text module header in the product text file (PTF) contains a syntax error.;Correct the syntax of the text module header and the modulename in the PTF.;; \?.Z>1p">PTFINVPRM, invalid parameter line syntax in product text filetware Installation UtilityQuery the product database (PDB) to determine the cause of the3error. Correct the problem and retry the operation. .0-1_{x-CONTROLY, Ctrl/Y or Ctrl/C has been detectedoftware Installation Utility9You entered Ctrl/Y or Ctrl/C to abort the PRODUCT command=while the operation was executing. Terminating this operation;in progress may leave your system in an inconsistent state.>You are strongly encouraged to resume the operation and let it complete.7Following this message is a detailed explanation of the9consequences of aborting the operation. After reading it,specify a destination device and directory for the copy of the product kit.=B0Sm1sOADEFER, that item has been deferred; please set the default valueoftware Installation Utility>No value is assigned to this configuration choice in the inputconfiguration file.>Supply a default value. This default configuration choice will-be presented to the user during installation.B0;1srADESTQUAL, destination qualifier will be ignored for this productoftware Installation Utility=The /DESTINATION qualifier that you specified for the PRODUCT=command or the logical name PCSI$DESTINATION that you definedThis question prompts you to select the default values or viewthe configuration choices.Enter Yes or No:= Yes Automatically selects all of the defaults established: by either the product or the product database. You< will not see any configuration choices nested inside" this configuration choice.7 No Displays the configuration choices that you can select. -0Z41^z,Do you want the defaults for all suboptions?oftware Installation Utility>This question prompts you to select the default values or viewthe configuration choices.Enter Yes or No:= Yes Automatically selects all of the defaults established: by either the product or the product database. You< will not see any configuration choices nested inside" this configuration choice.7 No Displays the configuration choices that you can select. $091Uq#DUPPROD, duplicate product ignoredoftware Installation Utility8The product has already been selected for the operation.None. 1f0 I1CMOTIFNOTSUP, DECwindows Motif interface is no longer supported for! the PRODUCT commandoftware Installation Utility>The DECwindows Motif user interface to the POLYCENTER Software7Installation utility has been retired. The capabilities=supported by the DCL interface (that is, the PRODUCT command)8are a superset of those previously available through theDECwindows Motif interface.=Specify the PRODUCT command without the /INTERFACE=DECWINDOWS qualifier. W2)021Zvi(MUSTBEYN, your answer must be YES or NOoftware Installation Utility1The question asked requires a Yes or No response.=Answer the question with Yes, No, Y, or N (case insensitive).7If a default value is indicated in square brackets (for=example, [Y]), you can press RETURN (the Enter key) to accept the default. 30P1HdINVALKEY, invalid keyoftware Installation Utility9The answer or key you entered is not a valid reply to thequestion being asked.Try another response.40(T1NjINVALRESP, invalid responseoftware Installation Utility'Your response to the prompt is invalid.7Specify the number that is displayed to the left of theproduct you want to select.P80r1bDLASTIPCF, multiple input configuration files were specified; values? in a later one may supersede those in a previous oneoftware Installation Utility:This message displays whenever you specify a list of files6with the /CONFIGURATION=INPUT qualifier to the PRODUCT:command. The POLYCENTER Software Installation utility does;not check whether a product configuration choice appears in4any or several of the specified configuration files.9None required. You can inspect the configuration files to7determine which products' values are contained in each.?20=>1c1NODEFER, defer key is not available at this timeoftware Installation UtilityThis operation works as expected for kits in sequential format:where a .PCSI container file is produced for each product.PKGREQD, source, destination, and material specifications are% required for this operationoftware Installation Utility3The PACKAGE command is missing one or more required qualifiers.6Specify all of the following qualifiers in the PACKAGEcommand:: /SOURCE Specifies an explicit source search path in9 which to find product description and text files.> /MATERIAL Specifies a source search path in which to find> the files that comprise the source material for the product.: /DESTINATION Specifies an explicit destination directory< specification in which to create the packaged kit.V10ZB1b~0PRIVCLASS1, operation requires SYSLCK privilegeoftware Installation Utility;The operation you requested requires that your process havethe SYSLCK privilege enabled.6Use the SHOW PROCESS/PRIVILEGE command to display your:authorized privileges and your enabled privileges. If your6account is authorized to use SYSLCK privilege, use the8SET PROCESS /PRIVILEGE command to enable it. If you lackaccount is authorized to use SYSLCK and SYSPRV privileges, use>the SET PROCESS /PRIVILEGE command to enable them. If you lackto enable them. If you lack authorization, contact your systemprerequisite products are not installed or no kits are present+for these products in the source directory.:Place the prerequisite software product kits in the source"directory and retry the operation.OwE001vaDTerminating is strongly recommended. Do you want to terminate? [YES]oftware Installation Utility6A severe error was detected by the POLYCENTER Software;Installation utility during the operation. Continuing might:leave the system in an incomplete state, for example, withSupply a value for the configuration choice if the choices are&to be written to a configuration file.f{^041xEUNWRITE, that item will not be written to configuration file; please set the valueoftware Installation Utility3No value is assigned for this configuration choice.;Supply a value for the configuration choice to proceed with9the configuration of this product. This value will not be"written to the configuration file.~10r1b~0USERABORT, operation terminated by user requestoftware Installation Utility;Your response to the previous question directed the PRODUCT5command to terminate before completing the operation.None. NA051r+`@VERSELECT, this choice unselected a previously selected versionoftware Installation Utility6The current product version selection has superseded a9previous product version selection. Only one version of a+product can be selected for this operation.4Verify that the correct product version is selected.!!y^041CWRITE, that item will be written to configuration file; please set the default valueoftware Installation Utility3No value is assigned for this configuration choice.:Supply a value for the configuration choice if this choice=is to be written to a configuration file. If no file is being2written, you can press Ctrl/D to defer the choice.""30\D1d 2PRIVCLASS4, operation requires SECURITY privilegeoftware Installation Utility;The operation you requested requires that your process havethe SECURITY privilege enabled.6Use the SHOW PROCESS/PRIVILEGE command to display your:authorized privileges and your enabled privileges. If your8account is authorized to use SECURITY privilege, use the8SET PROCESS /PRIVILEGE command to enable it. If you lackYou can use the PRODUCT DELETE RECOVERY_DATA command to deletenot affect the installation status of patches already applied.=However, you will not be able to uninstall these patches at a4future time by using the PRODUCT UNDO PATCH command.$$OWER, AlphaServer 8m^/1V7BAD, bad checksum from 'cabinet-id' cabinet, regulator% 'regulator-id'; check error log200 Series Power Monitoring5A data packet received from the specified H7263 power>regulator contains a bad checksum. This message can indicate a6hardware error in the specified H7263 power regulator.8Use the DCL command DIAGNOSE to examine the system error;log file. Also examine the system for a failing H7263 power regulator.%%[|a/a_1m8EVENT, power event from 'cabinet-id' cabinet, regulator' 'regulator-id'; check error log200 Series Power Monitoring;The POWER_MONITOR process has detected a change in state of$the specified H7263 power regulator.Either your program specified an invalid argument or the value+of an argument is not in the correct range.:Correct the program to specify a valid argument or a value!that is within the correct range.)) )!1Zg(FORMEDAPP, a new application was formedsing Facility;A new application was formed by the calling process. Unless9this was not the expected result, this status indicates asuccessful operation.None.**5!s1fs4NOT_AVAILABLE, requested resource not available nowsing Facility:This success status is returned when you request immediate7nonblocking access to a resource that is not available.Continue normally.++! 5!fV1fs/4EVENT_OCCURRED, event occurred - param: 'parameter'sing Facility8This code indicates the occurrence of an event for which,notification has been requested by the user.>Since the application requested this notification, response isapplication-dependent.,,&5!9 1fs4BUFOVFL, buffer overflow for output filename stringsing Facility8The buffer could not contain the complete output string.Recode to pass a larger buffer.--3U!O1ANONPIC, cannot map section 'section' to same addresses as others mapped itsing FacilityDetermine the cause of the termination by examining the statuscode.11G =!;s1n{)> /!1`m.JOINEDAPP, an existing application was joinedsing Facility=The process joined an existing application instead of forming;a new application. Unless this was not the expected result,-this status indicates a successful operation.None.??;!SV1ly":NORMAL_EXIT, normal exit - index: 'index' status 'status'sing Facility3This message indicates the occurrence of the normalparticipant termination event.>Since the application requested this notification, response isapplication-dependent.@@1_!OW1C=ATTUSETWO, attempt to use two full barriers simultaneously - deadlock will occur.sing FacilityRecode to prevent deadlock by waiting on only one application-wide barrier at a time.AA 7!@31hu6ELEALREXI, an element of the same name already existssing Facility5An element by this name already exists, and its ID is returned.2Continue normally if you expect the name to exist.BB!!9T1R_ NOSECEX, no such section existssing Facility8The section specified to flush or delete does not exist.:Recode your program to ensure that the section to flush ordelete has been created.CC E!1vDELEINUSE, object is in use, specified operation cannot be performedsing Facilityspecified object is not in use when the specified operation is attempted.DD9!4B1jw8INVNUMCHI, invalid number of children, must be positivesing Facility3An attempt was made to create a number less than 1.;Recode the program to request a value greater than or equalto 1.EE 4!1er3DELETED, the specified object was forcibly deletedsing Facility8An object that ordinarily cannot be deleted was forcibly8deleted at the caller's request. This status indicates asuccessful delete operation.None.FFI&!31Wd[%NOINIT, PPL has not been initializedsing Facility2PPL$INITIALIZE must be called before this routine.;Recode your program to ensure that calls are in the correct9order. PPL$INITIALIZE is performed automatically for most>calls, but not for those calls that require the prior creationof an element.GG5!1fs4NOSUCHAPP, the specified application does not existsing Facility;The application that the process requested to join does not=exist. Because the request specified the "join-only" flag, noapplication was created.=If this is an unexpected error, check whether the application=name is specified correctly or whether the application has in8fact been created when this process attempts to join it.HH?!R[1p}*>ABNORMAL_EXIT, abnormal exit - index: 'index' status 'status'sing Facility>This code indicates the occurrence of the abnormal participanttermination event.7Since the application requested this notification, your"response is application-dependent.II=!1<1n{Recode your program to ensure that the input identification isfor a created element.KKg 2!b1cpy1INSVIRMEM, insufficient virtual memory availablesing Facility8The calling service does not have a sufficient amount of(available space to complete the request.:If extensive PPL services are being used, try specifying a=larger value to PPL$CREATE_APPLICATION. Otherwise, check your-system quotas to see if more space is needed.LL ,!L[1]j+INTDELPRC, participant stopped by PPL$STOPsing Facility>An application call to PPL$STOP forced the termination of this participant.7Since the application itself terminated this party, any"actions are application-dependent.MM1!:[1bo0NOSUCHLOC, no lock with the specified ID existssing Facility9No lock element is specified by the input identification.>Recode your program to ensure that the input identification isfor a created lock element.NN6!9G1gt5NOSUCHNAM, no element with the specified NAME existssing Facility8The name you input does not specify an existing element.=Recode your program to ensure that the name matches a createdelement.OO2!>e1cp1NO_SUCH_PARTY, no such party in this applicationsing Facility=The specified participant does not exist in this application.=Recode your program to ensure that the correct participant is&specified in the call to this routine.PP  1!Q[1bo0INTTERMIN, participant stopped by PPL$TERMINATEsing Facility>An application call to PPL$TERMINATE forced the termination ofthis participant.7Since the application itself terminated this party, any"actions are application-dependent.QQ4!41er%3NOMATCH, no match for the specified item was foundsing Facility3No object with the specified name currently exists.:If this is an unexpected result, check whether the name is:specified correctly or whether the object has already beendeleted.RRkY!K1}>INVSEMINI, invalid semaphore initial value, cannot exceed its maximum valuesing Facility;A semaphore initial value must be less than or equal to itsmaximum value.:Lower the specified initial value. Check the values of the>parameters semaphore_maximum and semaphore_initial, and adjust the incorrect value accordingly.SS6!3r1gt5SEMALRMAX, semaphore is already at its maximum valuesing Facility2The semaphore value cannot be incremented further.:Recode the program to ensure that only the correct maximum6number of PPL$INCREMENT_SEMAPHORE requests is entered.TT>!.81o|=INVSEMMAX, invalid semaphore maximum value, must be positivesing Facility-A semaphore's maximum value must be positive.7Change the specified maximum value to a positive value.UU9!(@1jw8SEMININON, semaphore initial value must be non-negativesing Facility'An improper initial value is specified.7Recode your program to ensure that the correct value ispassed.VV%!5Z1Vc$LOCNOTEST, lock was not establishedsing Facility4A lock that has not been granted cannot be released.8Code your program to ensure that the lock is held by the caller attempting to release it.WW9PD, Point-to-PointUcG19You tried to disconnect a device that was not part of a Point-#to-Point Protocol (PPP) connection.=Check the device name and reissue the PPPD command DISCONNECT[ddcu:].e the operation.est and sendanother message.r handling and the /OVERRIDE=NO_FORCED_ERRORqualifier was not specified.=Specify the /OVERRIDE=NO_FORCED_ERROR qualifier and retry the operation.nD;PPPD, Point-to-PointUB1?NOTNUMERIC, value specified for '/qualifier' ('value') must be numeric Protocol7A nonnumeric value was entered where a numeric value is required.Enter a numeric value.2x1cl21NOTREG, network protocol has not been registered Protocol7The protocol specified by the PPPD command SET/NETWORK_8PROTOCOL [ddcu:] does not match the name of the protocol9registered in the network database (using the DCL commandSET NETWORK/NETWORK_TYPE).8Verify that the protocol name is correct and reissue the>command. If the problem persists, contact your system manager.'o/1Xa&OUTPUTERR, error creating output line Protocolcannot be established for the reason given in the accompanyingmessage..Take action based on the accompanying message.-^/1^g,PPPENABLEERR, error starting PPP connection Protocol:A point-to-point connection was not enabled for the reason"given in the accompanying message..Take action based on the accompanying message. 9m/1js8PPPINFOERR, error obtaining information from PPP device Protocol>PPPD cannot retrieve information from the specified device for-the reason given in the accompanying message..Take action based on the accompanying message. ,1@PPPLISTOVER, PPP itemlist overrun; tag, items size, items item_B length and len = 'value1' 'value2' 'value3' 'value4' Protocol+A data encoding error occurred within PPPD.Contact HP Customer Support. 5g1fo4PPPNOTAVAIL, point-to-point driver is not installed Protocol;PPPD cannot locate the Point-to-Point Protocol (PPP) device*driver; it is not installed on the system.Contact your system manager. %/1V_$PPPSETERR, error setting PPP device Protocol8While the Point-to-Point Protocol (PPP) device was being:initialized, an error occurred for the reason given in theaccompanying message..Take action based on the accompanying message. R1;PREVSET, device has already been set up for point-to-point connections ProtocolU1ox=PROTOERR, error initiating network protocol callback routine Protocol9An error occurred while attempting to execute the networkprotocol callback routine.message while using a network protocol that supports Point-to-)Point Protocol, contact the manufacturer.+y/1\e *READERR, error reading from 'device-name' Protocol9During a read operation on the specified device, an error5occurred for the reason described in the accompanyingmessage..Take action based on the accompanying message.?491py>REMOTE, physical device specified cannot be a remote terminal Protocol3The specified physical device is a remote terminal.8Specify a physical device that is not a remote terminal.$?851py>TERMINAL, physical device specified must be a terminal device Protocol7The specified physical device is not a terminal device.4Specify a physical device that is a terminal device.%&Z/1W`%TERMSETUP, error with terminal setup ProtocolThe fatal error reported in an accompanying message caused thecommand to fail.,Correct the problem and retry the operation.Y8w1irk7ASNCNTINV, unable to show counters on an inactive line Protocol9The current serial line is not in Point-to-Point Protocol<(PPP) mode. No counter information is available for display.;Switch the serial line into PPP mode using the PPPD commandPPPD failed to configure an asynchronous device for the reason&described in the accompanying message..Take action based on the accompanying message.7a/1hq6ASSIGNCHAN, error trying to open device 'device-name' Protocol9PPPD failed to access the specified device for the reason&described in the accompanying message..Take action based on the accompanying message.E1v DBADIOSBADDR, IOSB buffer address 'address' is not on allocated list Protocol=The address of the I/O status block (IOSB) is not valid. PPPD>tried to use a status block that is not in the IOSB allocationqueue.Contact HP Customer Support. 8v71ir7BATCH, batch operations are not supported at this time ProtocolThe specified I/O status returned by the PPPD command DIAL_OUT[ddcu:] is not valid.Contact HP Customer Support.))SqCw1eCINVFLOWCTRL, cannot set hardware flow control on a serial port set, to both NOMODEM and NOCOMMSYNC Protocol;The flow control setting for the current serial port is notvalid.9Use the XON_XOFF flow control setting or have your systemvalid value(s) for this PPPD qualifier. Specify a legal value.11$-1^g6,IOSBALLOC, allocated IOSB list is not empty Protocol>When you tried to switch or disconnect the line during a DIAL_>OUT operation, PPPD encountered I/O status blocks (IOSBs) from3a pending I/O request in the IOSB allocation queue.Contact HP Customer Support.22>@=1ox=LOGNAME, logical name exceeds maximum length for device name Protocol9The specified logical name exceeds the limit for a devicename.E.1v"PDMODEMHANGUP, modem has signaled a hangup on the line; session ended Protocol;Due to a hardware error, interference over the serial line,>or a timeout event, the modem has initiated a hangup and ended'data transmission over the serial line.;Try to access a better connection by repeating the previous>DIAL_OUT operation. If the problem persists, check your serialAsk a user with SYSPRV privileges (usually the system manager)to disconnect the device.77+>p1\e*NOPARITY, device must be set to no parity Protocol=The physical device is set to something other than no parity.5Set the physical device to no parity by executing thefollowing command:% $ SET TERMINAL/NOPARITY device-name88-a/1^g,NOPORTACCESS, error accessing 'device-name' Protocol9PPPD failed to access the specified device for the reason&described in the accompanying message..Take action based on the accompanying message.998DZr1u~JCNOPPP, network protocol has not registered a PPPD callback routine Protocol8The network protocol that you are using does not include Point-to-Point Protocol support.9Check the manufacturer's specifications and use a network7protocol that includes Point-to-Point Protocol support.::)u/1Zc(NOPPPACCESS, error accessing PPP device Protocol;PPPD failed to access the specified Point-to-Point Protocol8device for the reason given in the accompanying message..Take action based on the accompanying message._MONITOR process has detected a change in state of$the specified H7263 power regulator.Either your program specified an invalid argument or the value+of an argument is not in the correct range.:Correct the program to specify a valid argument or a value!that is within the correct range.)) )!1Zg(FORMEDAPP, a new application was formedsing Facility;A new application was formed by the calling process. Unless9this was not the expected result, this status indicates asuccessful operation.None.**5!s1fs4NOT_AVAILABLE, requested resource not available nowsing Facility:This success status is returned when you request immediate7nonblocking access to a resource that is not available.Continue normally.++! 5!fV1fs/4EVENT_OCCURRED, event occurred - param: 'parameter'sing Facility8This code indicates the occurrence of an event for which,notification has been requested by the user.>Since the application requested this notification, response isapplication-dependent.,,&5!9 1fs4BUFOVFL, buffer overflow for output filename stringsing Facility8The buffer could not contain the complete output string.Recode to pass a larger buffer.--3U!O1ANONPIC, cannot map section 'section' to same addresses as others mapped itsing FacilityDetermine the cause of the termination by examining the statuscode.11G =!;s1n{)> /!1`m.JOINEDAPP, an existing application was joinedsing Facility=The process joined an existing application instead of forming;a new application. Unless this was not the expected result,-this status indicates a successful operation.None.??;!SV1ly":NORMAL_EXIT, normal exit - index: 'index' status 'status'sing Facility3This message indicates the occurrence of the normalparticipant termination event.>Since the application requested this notification, response isapplication-dependent.@@1_!OW1C=ATTUSETWO, attempt to use two full barriers simultaneously - deadlock will occur.sing FacilityRecode to prevent deadlock by waiting on only one application-wide barrier at a time.AA 7!@31hu6ELEALREXI, an element of the same name already existssing Facility5An element by this name already exists, and its ID is returned.2Continue normally if you expect the name to exist.BB!!9T1R_ NOSECEX, no such section existssing Facility8The section specified to flush or delete does not exist.:Recode your program to ensure that the section to flush ordelete has been created.CC E!1vDELEINUSE, object is in use, specified operation cannot be performedsing Facilityspecified object is not in use when the specified operation is attempted.DD9!4B1jw8INVNUMCHI, invalid number of children, must be positivesing Facility3An attempt was made to create a number less than 1.;Recode the program to request a value greater than or equalto 1.EE 4!1er3DELETED, the specified object was forcibly deletedsing Facility8An object that ordinarily cannot be deleted was forcibly8deleted at the caller's request. This status indicates asuccessful delete operation.None.FFI&!31Wd[%NOINIT, PPL has not been initializedsing Facility2PPL$INITIALIZE must be called before this routine.;Recode your program to ensure that calls are in the correct9order. PPL$INITIALIZE is performed automatically for most>calls, but not for those calls that require the prior creationof an element.GG5!1fs4NOSUCHAPP, the specified application does not existsing Facility;The application that the process requested to join does not=exist. Because the request specified the "join-only" flag, noapplication was created.=If this is an unexpected error, check whether the application=name is specified correctly or whether the application has in8fact been created when this process attempts to join it.HH?!R[1p}*>ABNORMAL_EXIT, abnormal exit - index: 'index' status 'status'sing Facility>This code indicates the occurrence of the abnormal participanttermination event.7Since the application requested this notification, your"response is application-dependent.II=!1<1n{Recode your program to ensure that the input identification isfor a created element.KKg 2!b1cpy1INSVIRMEM, insufficient virtual memory availablesing Facility8The calling service does not have a sufficient amount of(available space to complete the request.:If extensive PPL services are being used, try specifying a=larger value to PPL$CREATE_APPLICATION. Otherwise, check your-system quotas to see if more space is needed.LL ,!L[1]j+INTDELPRC, participant stopped by PPL$STOPsing Facility>An application call to PPL$STOP forced the termination of this participant.7Since the application itself terminated this party, any"actions are application-dependent.MM1!:[1bo0NOSUCHLOC, no lock with the specified ID existssing Facility9No lock element is specified by the input identification.>Recode your program to ensure that the input identification isfor a created lock element.NN6!9G1gt5NOSUCHNAM, no element with the specified NAME existssing Facility8The name you input does not specify an existing element.=Recode your program to ensure that the name matches a createdelement.OO2!>e1cp1NO_SUCH_PARTY, no such party in this applicationsing Facility=The specified participant does not exist in this application.=Recode your program to ensure that the correct participant is&specified in the call to this routine.PP  1!Q[1bo0INTTERMIN, participant stopped by PPL$TERMINATEsing Facility>An application call to PPL$TERMINATE forced the termination ofthis participant.7Since the application itself terminated this party, any"actions are application-dependent.QQ4!41er%3NOMATCH, no match for the specified item was foundsing Facility3No object with the specified name currently exists.:If this is an unexpected result, check whether the name is:specified correctly or whether the object has already beendeleted.RRkY!K1}>INVSEMINI, invalid semaphore initial value, cannot exceed its maximum valuesing Facility;A semaphore initial value must be less than or equal to itsmaximum value.:Lower the specified initial value. Check the values of the>parameters semaphore_maximum and semaphore_initial, and adjust the incorrect value accordingly.SS6!3r1gt5SEMALRMAX, semaphore is already at its maximum valuesing Facility2The semaphore value cannot be incremented further.:Recode the program to ensure that only the correct maximum6number of PPL$INCREMENT_SEMAPHORE requests is entered.TT>!.81o|=INVSEMMAX, invalid semaphore maximum value, must be positivesing Facility-A semaphore's maximum value must be positive.7Change the specified maximum value to a positive value.UU9!(@1jw8SEMININON, semaphore initial value must be non-negativesing Facility'An improper initial value is specified.7Recode your program to ensure that the correct value ispassed.VV%!5Z1Vc$LOCNOTEST, lock was not establishedsing Facility4A lock that has not been granted cannot be released.8Code your program to ensure that the lock is held by the caller attempting to release it.WW9PD, Point-to-PointUcG19You tried to disconnect a device that was not part of a Point-#to-Point Protocol (PPP) connection.=Check the device name and reissue the PPPD command DISCONNECT[ddcu:].e the operation.est and sendanother message.r handling and the /OVERRIDE=NO_FORCED_ERRORqualifier was not specified.=Specify the /OVERRIDE=NO_FORCED_ERROR qualifier and retry the operation.t}^FPRINT, PRINT Command.S/1__-ADDFIL, error adding file 'file-name' to job>The system encountered an error adding the specified file to abatch or print job..Take action based on the accompanying message.&&S!18BREMOINSF, node name specification or /REMOTE missing from command line7To print or submit a file residing on a remote node for6processing on that node, the /REMOTE qualifier must be4included in the PRINT or SUBMIT command and the fileAn error has occurred while closing the process dump file. The:messages that follow provide additional data on the error.4If the cause of the error can be understood from theNone. This is an informational message from SYS$SYSTEM:IMGDMP_RIGHTS.zib1BDELETED, rights identifier 'id' with incorrect value ('value') or% attributes ('name') deletedmp;The specified rights identifier has been deleted because it%has an incorrect value or attributes.>None. This is an informational message from SYS$SYSTEM:IMGDMP_=RIGHTS, which will then automatically recreate the identifier&with the correct value and attributes./|;81lnA:EXPREG, SYS$EXPREG_64 returned fewer pages than requestedmp7This is a supplementary message for the BADLOGIC error.:Check whether the process has sufficient pagefile quota to9write the process dump. If this does not appear to be the%problem, contact HP Customer Support.~81 (>FETCHERROR, unexpected error fetching data from 'address1' toC 'address2', length 'm', requested at PC 'n'; condition code = 'status'mp7This is a supplementary message for the BADLOGIC error.Contact HP Customer Support.9&|v1WYK%NOEXTEND, error extending 'filename'mp8An error occurred while extending the process dump file.;Secondary messages provide additional information about theerror.:If possible, correct the error based on information in the:secondary message. Otherwise, contact HP Customer Support.S81ENOREAD, no access to location 'address', length 'm', requested at PC 'n'mp7This is a supplementary message for the BADLOGIC error.Contact HP Customer Support.m81BNOWRITE, bad fetch target; no write access to location 'address',) length 'm', requested at PC 'n'mp7This is a supplementary message for the BADLOGIC error.Contact HP Customer Support.Q81BNOZERO, inconsistency found while zeroing unwanted data - no more datamp7This is a supplementary message for the BADLOGIC error.Contact HP Customer Support.7-sv1^`I,OPENOUT, error opening 'filename' as outputmp6An error occurred while opening the process dump file.;Secondary messages provide additional data about the error.:If possible, correct the error based on information in the:secondary message. Otherwise, contact HP Customer Support.i1;BPRIVIMAGE, image has elevated privileges; requires SYS$PROTECTED_% PROCDMP or IMGDMP$READALLmp;An attempt was made to dump a process running an image that=was installed with higher privileges than the process, or the$process is in a protected subsystem.;Use AUTHORIZE to grant the IMGDMP$READALL identifier to the:process if the user is trusted. Otherwise, refer to the HP>OpenVMS System Manager's Manual, Volume 2: Tuning, Monitoring,=and Complex Systems and read the chapter about Managing Page,:Swap, and Dump Files for information about how to set up acompatibility, user services should return this status for anyunrecognized function code.None.iDF)A1w:{EMODNOTFND, library module 'module-name' not found in record 'number'Modification Facility>The specified library module was not found in this record. The;print symbiont failed to locate the specified module in the2device control library associated with this queue.7Insert the library module or specify the correct modulelibrary. ;)"1l:INVITMCOD, invalid item code, item code = 'hex-item-code'Modification Facility!An invalid item code is detected.Specify a valid item code.!!20)D1avD/NOFILEID, no file identification was specifiedModification Facility=No file identification number is specified with this request.;This error usually indicates a problem in the creation of abatch log file.>Correct the problem in the batch command file and resubmit thejob.""[)R1>OSCTOOLON, operating system command string too long in record 'record-number'Modification Facility=The operating system command string is longer than allowed inthis record number.None.##]):1?TOOMANYLEV, too many levels of nested input detected in record 'record-number'Modification Facility9There are too many levels of nested input in this record.Contact HP Customer Support.$$[[)sY1mDLATSYM, LAT protocol requested on device 'device-name' which is not a LAT deviceModification Facility=This device is not a LAT device, but LAT symbiont protocol is4being requested by the requested processor symbiont.=Either use a non-LAT symbiont for this device or choose a LATdevice for this processor.%%+).1\q*NEWPAGE, attempted to write into new pageModification Facility-There is an attempt to write into a new page.None.&&3)Y1dy2PENDING, asynchronous operation not yet completedModification FacilityA print symbiont format routine is requesting that the current input service routine be paused.None.((v ))1DYEOF, end of inputModification Facility(This message indicates the end of input.None.))QMAN, Queue ManagerF1wwELOSTINFO, information for 'name' was lost due to database corruption:The queue manager detected corruption in the definition of9the specified queue, form, or characteristic. The corruptinformation was deleted.=Review the full definition of the affected object and correct2the definition to include the deleted information.=As soon as possible, do the following and contact HP CustomerSupport:=o Use the BACKUP/IGNORE=INTERLOCK command to create a copy of all *.QMAN$JOURNAL* files.=o Collect any messages written to the console or operator log= file with the JOB_CONTROL user name or the user name of any' queue manager running on your system.9 The default queue manager user name is QUEUE_MANAGE. If< any other queue managers are running on your system, their< user names are used as the additional queue manager names.; Use the SHOW QUEUE/MANAGERS command to list all the queue managers.**9071aaK/LOWDISKSPACE, disk space is low on 'disk-name'>The queue manager is still progressing through its work, but a>lack of disk space has been detected. This message indicates a4potential problem if preventive action is not taken.6Purge and delete files to make more space on the disk.++nU1VELOWMEMORY, the queue manager process may require more virtual memory' than is currently availableThe job controller or queue manager encountered an error whileallocating virtual memory.;Take action based on the accompanying message. You may need>to run AUTOGEN to increase the SYSGEN parameter VIRTUALPAGECNT;(on VAX systems only). If the accompanying message does not>require you to keep the process dump, the dump can be deleted.//^BY/1ssANODEVINFO, unable to retrieve device information, on 'disk-name'system is running, use the CONVERT/SHARE command. For completeThe queue manager detected corruption in the specified job anddeleted the job.ACCWAITDONE, no longer waiting to access files in 'directory'=When a node is booting, the queue manager can start up before:the disk that contains queue and journal files is mounted.:This message indicates that the queue manager is no longer8waiting because the disk has been mounted or startup has completed.None.<</1W1bbA0SYMDEL, unexpected symbiont process termination;A symbiont process exited without being requested to do so.9This message can result from an unplanned node or OpenVMSCluster shutdown.=Take action based on the accompanying message. A process dumpmight have been created.==<ekM1N:INVSMBMSG, invalid data in message from symbiont on queue) 'queue-name' is being ignored>A minor breach of symbiont or queue manager protocol occurred.;The queue manager explicitly made adjustments to compensate;for the breach. The symbiont will continue to process work.>This message is intended to alert symbiont writers to problems:in symbiont code. In most cases, users other than symbiont8writers need not be concerned when this message appears.=General users should report the occurrence of this message to;the symbiont developer, or ask the system manager to do so.;Symbiont developers should review the symbiont code and the=Print Symbiont Modification (PSM) and Symbiont/Job Controller;Interface (SMB) routines in the HP OpenVMS Utility Routines:Manual to determine what activity is causing this message.:Ensure that no improper state changes are being requested,>such as stalling a starting queue or pausing a stopping queue.>UEMAN, Queuing Util |1Q]TMOEXP, timeout period expiredity Commands>The SYNCHRONIZE command was terminated when the user-specifiedqualifier or specify a longer timeout value. The timeout value;can be any positive number greater than 0. There is no highlimit.??+5 $+1fr4INVCHANAM, 'name' is an invalid characteristic nameity Commands=The characteristic name specified is not syntactically valid.!1jv8INVCHANUM, 'number' is an invalid characteristic numberity Commands=The specified characteristic number is syntactically invalid. Correct and reenter the command.AAr+ !!1\h*INVFORNAM, 'name' is an invalid form nameity Commands9The specified form name is not syntactically valid. After;logical name translation, the form name must be a character:string whose length is in the range of 1 to 31 characters.=The character string must consist of alphanumeric characters,1dollar signs ($), and underscore (_) characters. Correctly specify the form name.BBs/ 4!1`l.INVFORNUM, 'number' is an invalid form numberity Commands3The specified form number is syntactically invalid. Correct and reenter the command.CC%+ fi1\h7*INVLOGFIL, invalid log file specificationity Commands7The log file specification is syntactically invalid for-reasons specified in an accompanying message.The rebuild operation encountered an error writing the storagecontrol block..Take action based on the accompanying message.JJ='%9/1Xi&MODIFYERR, error modifying quota filed (Mount Utility)8An error occurred while trying to access the quota file..Take action based on the accompanying message.KKC?%P*1p>SYSHEADER, failed to read system file header; rebuild abortedd (Mount Utility);The rebuild operation aborted because it could not read thesystem file header.)Check the hardware and retry the program.LL"PX%k/14?WRTBITMAP, I/O error writing storage bitmap on relative volume 'volume-id'd (Mount Utility)allocation, disallow any other file activity for them and copy;all but one file to a new version. Then delete the versions;containing dual allocation. This causes blocks that are notzero for a hardware device. The device description will not beadded.7Assign a nonzero value for the device ID, and retry the operation.Fe)|+1LwDNOT_ADDED, an error was detected for DEVICE = 'device-name', NAME =D 'device-mnemonic', or DRIVER = 'driver-name'; not added.sed AutoconfigurationMISSING_INFO, a required field was not provided for: DEVICE =A 'device-name', NAME = 'device-mnemonic', or DRIVER5 = 'driver-name' at line 'line-number'.sed Autoconfiguration;One of the listed fields is blank, and a value is required.)The device description will not be added.4Specify all required values and retry the operation.FH^)G61!CUNKNOWNADAPTER, unknown adapter Type: 'text-string' at line 'line- number'.sed Autoconfigurationcaused by a mistyped command, this condition can cause further=errors. If possible, check your code and retry the operation. FKB)I.1sAUNKNOWN_FLAG, unknown flag: 'text-string' at line 'line-number'.sed Autoconfiguration>An unknown flag was specified. The device description will not be added.-Specify a valid flag and retry the operation. FxUw)xU15?NOT_IN_DEVICE, 'keyword' command encountered with no preceding6 DEVICE command, at line 'line-number'.sed Autoconfiguration=A valid command was found, but it was not preceded by a valid9DEVICE command. The device description will not be added.;Correct the condition (commonly caused by a spelling error)and retry the operation. FZ)v1>BNOT_IN_PRIVATE, END_PRIVATE command encountered with no preceding> BEGIN_PRIVATE command, at line 'line-number'.sed Autoconfiguration>An END_PRIVATE command was found, but no BEGIN_PRIVATE command6preceded it. The device description will not be added.9Check your code for a missing or misspelled BEGIN_PRIVATE9command or an extraneous END_PRIVATE command. Correct the"condition and retry the operation. F|`)XJ1DCBAD_NUMBER, the argument 'text-string' to the 'keyword' command isE not a valid number. Device 'device-name' ignored at line 'line-number'.sed Autoconfiguration8The numeric value in an argument was illegal. The devicedescription will not be added.:Retry the operation specifying only numeric characters forthis argument.F~W)O+1BNOEQUALS, missing equals sign in 'keyword' command at line 'line- number'.sed Autoconfiguration;The command expected an equals sign. The device descriptionwill not be added.*Correct the error and retry the operation.F })61fADUPLICATE_ID, Device 'device-name' has the same ID as a previous: device for this bus, at line 'line-number'.sed Autoconfiguration:Another device defined earlier in the file has the same ID>and ADAPTER values. The initial occurrence in the file will be(used; the second device will be ignored.5Check your configuration files for duplicate records.Fr )-1WDID_NOT_STRING, the ID for device 'device-name' is not a string, but? CASE_BLIND is specified, at line 'line-number'.sed Autoconfiguration;The CASE_BLIND flag implies that the device ID is a string,A required numeric value contained an illegal text string. The%device description will not be added.0Specify a numeric value and retry the operation.Fn)N/11>TOOMANYARGS, 'command' expected 'number' arguments, but found. 'number', at line 'line-number'.sed Autoconfiguration:The command had too many arguments. The device descriptionwill not be added..Correct the condition and retry the operation.FX)X71-CNOSTRING, string value is NULL in 'keyword' command at line 'line- number'.sed Autoconfiguration8A required string argument had a zero length. The devicedescription will not be added.6Specify the required argument and retry the operation.Fxz)41VECOMMAND_REPEAT, duplicate 'keyword' command for device 'device-name'3 is ignored, at line 'line-number'.sed Autoconfiguration=A command was repeated within a description. Only the initial:occurrence within the description will be used; subsequentoccurrences will be ignored.3Check your configuration files for invalid records.F]`)oZ1o?LINE_TRUNCATED, more than 'number' characters in line, at line 'line-number'.sed Autoconfiguration8The command line exceeds the maximum allowable number of5characters. The device description will not be added.4Correct the command so that it contains 256 or fewer$characters, and retry the operation.F7)n1]I>BAD_EISA_ID, the ID 'text-string' must be 3 alpha characters,D followed by 4 hex digits. Device 'device-name' ignored$ at line 'line-number'.sed Autoconfiguration8File-Based Autoconfiguration is ignoring an illegal EISA4device ID. The device description will not be added.;EISA device IDs are of the form XXXnnnv, where XXX is three7uppercase ASCII alphabetic characters, nnn is a 3-digit>hexadecimal product ID, and v is a hexadecimal revision value.;When an EISA ID is entered as a string, it is validated and>compressed into a 32-bit binary ID that can be compared to the=ID read from the EISA card. You can enter this value directlyusing a numeric ID.DNULL_HW_ID, no ID was specified for DEVICE 'device-name'; premature. END_DEVICE at line 'line-number'.sed Autoconfiguration7No hardware ID was specified for the device. The devicedescription will not be added.,Specify a device ID and retry the operation.FE)E61vDNOMEMORY, could not allocate memory; requested 'text-string' bytes.sed Autoconfiguration=Non-paged memory could not be allocated for the configurationtable.5Increase NPAGEDYN in SYSBOOT and retry the operation.FG, Registry for Op0Q!1af/INVCACHEACTION, invalid cache action parameterenVMS>The REG$_CACHEACTION item code specified was inappropriate forthe request type.>Specify REG$_CACHEACTION of either REG$K_WRITEBEHIND or REG$K_ WRITETHRU.=1ot=INVKEYID, key does not exist or invalid key ID was specifiedenVMS1LQINVPATH, invalid key pathenVMS=An invalid path was specified for the REG$_KEYPATH item code..Repeat the operation and specify a valid path.Repeat the operation without specifying the REG$_FILESAVE itemcode.''F :p1kp9IPLTOOHIGH, callers above IPL 0 cannot call this serviceenVMS=An attempt was made to call the $REGISTRY system service with1an interrupt priority level (IPL) greater than 0.6Lower the IPL to 0 before calling the $REGISTRY systemservice.An operation was attempted on a key that was locked by anotherthread.Attempt the operation again.))F'?1X]&KEYNAMEEXIST, key name already existsenVMS8Two subkeys of the same key cannot have an identical keyname.9Repeat the operation and specify another key name string.None. For more information about using Registry for OpenVMS or=the $REGISTRY system service, consult the "COM, Registry, and;Events for HP OpenVMS Developer's Guide" or the "HP OpenVMS"System Services Reference Manual".00F)G1Z_(NOVALUE, specified value does not existenVMSMake sure that the path string and the value name are correct.The attempted operation is not permitted by the REG$_SECACCESS<(security access) value that was specified when the Registry+for OpenVMS key was last opened or created.STRINGTRUNC, output buffer is not large enough to contain the converted stringenVMS=The output buffer returned by the Registry for OpenVMS serverContact HP Customer Support or check the OpenVMS Release Notes;for the announcement of a new Registry database version and;instructions about how to preserve and restore the Registry;database during an upgrade. If you have the latest Registry6database and still get this error, contact HP CustomerSupport.77Fa51DTOOMANYOPENKEY, number of opened keys exceeds the limit; close some opened keyenVMS:Too many Registry for OpenVMS keys have been opened by the9current process. This error usually indicates an error inThe specified value already exists in the Registry for OpenVMS database.>None. For more information about using Registry for OpenVMS or=the $REGISTRY system service, consult the "COM, Registry, and;Events for HP OpenVMS Developer's Guide" or the "HP OpenVMS"System Services Reference Manual".99FBe 1sxAVOLMISMATCH, cannot create nonvolatile subkey for a volatile keyenVMS8An attempt was made to create a nonvolatile subkey for a+volatile key. This is an illegal operation.3Repeat the operation and specify a volatile subkey.obtain a lock to synchronize access to Registry structures for the process.1ot/=OBJWITHLINK, deleted key or value had link(s) pointing to itenVMS7One or more keys or values were created with a symbolic9(logical) link to another key or value that has just been;deleted. All symbolic links to the deleted key or value are now invalid.:Depending on the circumstances, you may want to delete the=stale links. However, if the link is associated with a key or;value that is also about to be deleted, you can ignore thismessage.security permissions on the key as necessary to provide access to the key.==F+p1\a*ACTIVE, registry server is already activeenVMS9The Registry server process (REGISTRY_SERVER) was already5running when an attempt was made to start the server.None.>>FA%q1V[S$BADFILEVER, bad file version numberenVMS8The Registry server is unable to create or rename a file7because the resultant version number would be too high.5Use the DCL command DIRECTORY to examine the files in9SYS$REGISTRY and determine whether any file has a version;number of 32767. If so, rename the file and give it a lowerversion number.;If an RMS-E-FLK error occurs when you attempt to rename the;file, the file is being accessed by the Registry server. Instartup procedure only from a suitably privileged account that&has sufficient process dynamic memory.BBF)1Z_(INACTIVE, registry server is not activeenVMS=The Registry server process (REGISTRY_SERVER) was not runningdifferent from the SET and SHOW SERVER commands to communicate=with the Registry server and so can be used to verify whetherthe server is responding.=One way to determine whether the server is busy is to execute>a SHOW SYSTEM command to check the process state and CPU time.:You can also monitor the size of files in the SYS$REGISTRY8directory to see if the server is busy updating databasefiles.5If you cannot verify whether the server is responding:properly, try restarting the server. If you still get this#error, contact HP Customer Support.CCF/1`e.INVSECDESCRIPTOR, invalid security descriptorenVMS8The Registry server is unable to create a key or set thethe application requested notification, what key was modified,'and what type of modification occurred.EEFy..1_d-NOLOGNAM, no SYS$REGISTRY logical name matchenVMS-The logical name SYS$REGISTRY is not defined.:Define the SYS$REGISTRY logical name to point to a cluster;accessible directory that will be used to hold the registry:database. See the COM, Registry, and Events for HP OpenVMSwithin this period, the Registry request returns to the callerUse the SHOW SERVER REGISTRY command to verify that a RegistryVerify that the SYS$REGISTRY logical name is defined. If there=is no Registry database on the system, you can use the REG$CPcommand program to create one.Contact HP Customer Support or check the OpenVMS Release Notes8for the announcement of a new Registry database version.;You can also trace the history of your Registry database toNone. For more information about using Registry for OpenVMS or=the $REGISTRY system service, consult the "COM, Registry, and;Events for HP OpenVMS Developer's Guide" or the "HP OpenVMS"System Services Reference Manual". /61`e.HAVESUBKEYS, cannot delete a key with subkeysenVMS5An attempt was made to delete a key that has subkeys..First delete the subkeys; then delete the key.and ADAPTER values. The initial occurrence in the file will be(used; the second device will be ignored.5Check your configuration files for duplicate records.Fr )-1WDID_NOT_STRING, the ID for device 'device-name' is not a string, but? CASE_BLIND is specified, at line 'line-number'.sed Autoconfiguration;The CASE_BLIND flag implies that the device ID is a string,A required numeric value contained an illegal text string. The%device description will not be added.0Specify a numeric value and retry the operation.Fn)N/11>TOOMANYARGS, 'command' expected 'number' arguments, but found. 'number', at line 'line-number'.sed Autoconfiguration:The command had too many arguments. The device descriptionwill not be added..Correct the condition and retry the operation.FX)X71-CNOSTRING, string value is NULL in 'keyword' command at line 'line- number'.sed Autoconfiguration8A required string argument had a zero length. The devicedescription will not be added.6Specify the required argument and retry the operation.Fxz)41VECOMMAND_REPEAT, duplicate 'keyword' command for device 'device-name'3 is ignored, at line 'line-number'.sed Autoconfiguration=A command was repeated within a description. Only the initial:occurrence within the description will be used; subsequentoccurrences will be ignored.3Check your configuration files for invalid records.F]`)oZ1o?LINE_TRUNCATED, more than 'number' characters in line, at line 'line-number'.sed Autoconfiguration8The command line exceeds the maximum allowable number of5characters. The device description will not be added.4Correct the command so that it contains 256 or fewer$characters, and retry the operation.F7)n1]I>BAD_EISA_ID, the ID 'text-string' must be 3 alpha characters,D followed by 4 hex digits. Device 'device-name' ignored$ at line 'line-number'.sed Autoconfiguration8File-Based Autoconfiguration is ignoring an illegal EISA4device ID. The device description will not be added.;EISA device IDs are of the form XXXnnnv, where XXX is three7uppercase ASCII alphabetic characters, nnn is a 3-digit>hexadecimal product ID, and v is a hexadecimal revision value.;When an EISA ID is entered as a string, it is validated and>compressed into a 32-bit binary ID that can be compared to the=ID read from the EISA card. You can enter this value directlyusing a numeric ID.DNULL_HW_ID, no ID was specified for DEVICE 'device-name'; premature. END_DEVICE at line 'line-number'.sed Autoconfiguration7No hardware ID was specified for the device. The devicedescription will not be added.,Specify a device ID and retry the operation.FE)E61vDNOMEMORY, could not allocate memory; requested 'text-string' bytes.sed Autoconfiguration=Non-paged memory could not be allocated for the configurationtable.5Increase NPAGEDYN in SYSBOOT and retry the operation.FG, Registry for Op0Q!1af/INVCACHEACTION, invalid cache action parameterenVMS>The REG$_CACHEACTION item code specified was inappropriate forthe request type.>Specify REG$_CACHEACTION of either REG$K_WRITEBEHIND or REG$K_ WRITETHRU.=1ot=INVKEYID, key does not exist or invalid key ID was specifiedenVMS1LQINVPATH, invalid key pathenVMS=An invalid path was specified for the REG$_KEYPATH item code..Repeat the operation and specify a valid path.Repeat the operation without specifying the REG$_FILESAVE itemcode.''F :p1kp9IPLTOOHIGH, callers above IPL 0 cannot call this serviceenVMS=An attempt was made to call the $REGISTRY system service with1an interrupt priority level (IPL) greater than 0.6Lower the IPL to 0 before calling the $REGISTRY systemservice.An operation was attempted on a key that was locked by anotherthread.Attempt the operation again.))F'?1X]&KEYNAMEEXIST, key name already existsenVMS8Two subkeys of the same key cannot have an identical keyname.9Repeat the operation and specify another key name string.None. For more information about using Registry for OpenVMS or=the $REGISTRY system service, consult the "COM, Registry, and;Events for HP OpenVMS Developer's Guide" or the "HP OpenVMS"System Services Reference Manual".00F)G1Z_(NOVALUE, specified value does not existenVMSMake sure that the path string and the value name are correct.The attempted operation is not permitted by the REG$_SECACCESS<(security access) value that was specified when the Registry+for OpenVMS key was last opened or created.STRINGTRUNC, output buffer is not large enough to contain the converted stringenVMS=The output buffer returned by the Registry for OpenVMS serverContact HP Customer Support or check the OpenVMS Release Notes;for the announcement of a new Registry database version and;instructions about how to preserve and restore the Registry;database during an upgrade. If you have the latest Registry6database and still get this error, contact HP CustomerSupport.77Fa51DTOOMANYOPENKEY, number of opened keys exceeds the limit; close some opened keyenVMS:Too many Registry for OpenVMS keys have been opened by the9current process. This error usually indicates an error inThe specified value already exists in the Registry for OpenVMS database.>None. For more information about using Registry for OpenVMS or=the $REGISTRY system service, consult the "COM, Registry, and;Events for HP OpenVMS Developer's Guide" or the "HP OpenVMS"System Services Reference Manual".99FBe 1sxAVOLMISMATCH, cannot create nonvolatile subkey for a volatile keyenVMS8An attempt was made to create a nonvolatile subkey for a+volatile key. This is an illegal operation.3Repeat the operation and specify a volatile subkey.obtain a lock to synchronize access to Registry structures for the process.1ot/=OBJWITHLINK, deleted key or value had link(s) pointing to itenVMS7One or more keys or values were created with a symbolic9(logical) link to another key or value that has just been;deleted. All symbolic links to the deleted key or value are now invalid.:Depending on the circumstances, you may want to delete the=stale links. However, if the link is associated with a key or;value that is also about to be deleted, you can ignore thismessage.security permissions on the key as necessary to provide access to the key.==F+p1\a*ACTIVE, registry server is already activeenVMS9The Registry server process (REGISTRY_SERVER) was already5running when an attempt was made to start the server.None.>>FA%q1V[S$BADFILEVER, bad file version numberenVMS8The Registry server is unable to create or rename a file7because the resultant version number would be too high.5Use the DCL command DIRECTORY to examine the files in9SYS$REGISTRY and determine whether any file has a version;number of 32767. If so, rename the file and give it a lowerversion number.;If an RMS-E-FLK error occurs when you attempt to rename the;file, the file is being accessed by the Registry server. Instartup procedure only from a suitably privileged account that&has sufficient process dynamic memory.BBF)1Z_(INACTIVE, registry server is not activeenVMS=The Registry server process (REGISTRY_SERVER) was not runningdifferent from the SET and SHOW SERVER commands to communicate=with the Registry server and so can be used to verify whetherthe server is responding.=One way to determine whether the server is busy is to execute>a SHOW SYSTEM command to check the process state and CPU time.:You can also monitor the size of files in the SYS$REGISTRY8directory to see if the server is busy updating databasefiles.5If you cannot verify whether the server is responding:properly, try restarting the server. If you still get this#error, contact HP Customer Support.CCF/1`e.INVSECDESCRIPTOR, invalid security descriptorenVMS8The Registry server is unable to create a key or set thethe application requested notification, what key was modified,'and what type of modification occurred.EEFy..1_d-NOLOGNAM, no SYS$REGISTRY logical name matchenVMS-The logical name SYS$REGISTRY is not defined.:Define the SYS$REGISTRY logical name to point to a cluster;accessible directory that will be used to hold the registry:database. See the COM, Registry, and Events for HP OpenVMSwithin this period, the Registry request returns to the callerUse the SHOW SERVER REGISTRY command to verify that a Registry411e7P3LOGERR, error writing to log file, log file closed Support and SET HOST Commandand restart logging by specifying SET HOST/DTE/LOG=filename or'enter SET DTE/LOG at the DTEPAD prompt.!1//1Ro LOGFAI, failed to open log file Support and SET HOST Command.An error prevented the creation of a log file..Take action based on the accompanying message. 1451KhDIALFAI, autodial failed Support and SET HOST Command3The autodialer failed to dial the specified number.4Verify the specified number and reenter the command.1./1PmPORTRXERR, port receive error Support and SET HOST Command-The outgoing terminal line detected an error..Take action based on the accompanying message. <1@1m;CONNECTION, connection made using 'protocol-name' protocol Support and SET HOST Command5A normal connection has been made using the specified protocol.None.!1,A1Ro INVVAL, invalid value - 'value' Support and SET HOST Command+A value entered for a parameter is invalid.7Check the rules for the parameter value and reenter thecommand.);1U1l:REMOTE, connection established to remote node 'node-name' Support and SET HOST Command:Connection to the remote system has been established. Thismessage is informational.None. .*1,/1[x)INVCHAR, invalid character - 'character' Support and SET HOST Command+The command contained an invalid character..Correct the character and reenter the command. 9*11[x)NOTERM, command device is not a terminal Support and SET HOST Command9SET HOST is invoked from a batch job. (SYS$COMMAND is not:a terminal.) SET HOST can be invoked only from interactiveterminal sessions.None. @"1"1Sp!PROTERR, internal protocol error Support and SET HOST Command!A system internal error occurred.Contact HP Customer Support. F%1"1Vs$UNKMSG, unknown message header type Support and SET HOST Command!A system internal error occurred.Contact HP Customer Support. ^"131Sp!BADMSG, unknown sub-message type Support and SET HOST Command2This message indicates an internal software error.Contact HP Customer Support.H`M1vI1~Z*CAPTIVE, this command cannot be executed.! Your account is CAPTIVE Support and SET HOST Command=Captive accounts are not allowed unrestricted access to CLIs,7which the SPAWN or CREATE_PROCESS built-in would allow.7Do not use the SPAWN or CREATE_PROCESS built-ins from acaptive account.dy1Q1DRESUMED, connection resumed. Press Ctrl/'escape character' to quit,3 Ctrl/'command character' for command mode Support and SET HOST Command>Connection to the remote system has been resumed. This messageis informational.9None. If you wish to quit the session, press Ctrl/'escape;character'. To access DTE command mode, press Ctrl/'command character'.f151Kh,SPDNOTSET, speed not set Support and SET HOST Command4The selected speed is not supported by the terminal.9For specific information on supported speeds, consult the;hardware manual for your terminal. Select a supported speedand reenter the command.l311d2BADOUTBAND, invalid out of band AST specification Support and SET HOST CommandA protocol error occurred.Contact HP Customer Support.l/1f1`}.NOPROT, protocol not supported on remote node Support and SET HOST Command;A DCL command SET HOST has been entered on a node that does)not support the remote terminal protocol.None.<|1-1MjNQIOERR, internal QIO error Support and SET HOST Command!A system internal error occurred.=If the SYSTEM message NOPRIV accompanies this one, either theA remote terminal session has ended. If DECnet for OpenVMS has>not been started on your system, _0:: is displayed in place ofyour node name.None.X1t1+ACNTRLY, Are you repeating ^Y to abort the remote session on node 'node-name'? Support and SET HOST Command5This message provides an opportunity to terminate the=connection if logging out is not possible on the remote node.Enter YES or NO.31S 1d2NETDIS, disconnect on remote terminal DECnet link Support and SET HOST Command>The remote terminal facility received a disconnect status fromthe DECnet network. Try again.61L1g5NETERR, DECnet channel error on remote terminal link Support and SET HOST Command5A DECnet error on the remote terminal link caused the;connection to be broken. One possible cause is an incorrectconflict with an address for another node in the remote node'snetwork configuration database.>Use the Network Control Program (NCP) to examine the status of9the remote node's database. The NCP command SHOW displays6network data, and the NCP command LOOP NODE tests data!transmission to a specified node."1A41Sp!NETMBX, link mailbox code 'code' Support and SET HOST Command7A remote terminal network link is broken for unexpectedreasons.3Refer to DECnet documentation for more information.w181 ATOQUIT, connection established. Press Ctrl/'escape character' to quit,2 Ctrl/'command character' for command mode Support and SET HOST Command7A connection to the remote system has been established.6None required. To quit the session, press Ctrl/'escape;character'. To access DTE command mode, press Ctrl/'command character'. 1(1OlINTERR, internal logic error Support and SET HOST Command'A violation of CTERM protocol occurred.Contact HP Customer Support.#1+1Tq"INVSPEED, invalid speed - 'speed' Support and SET HOST CommandThe selected speed is invalid.*Correct the speed and reenter the command.NAME, RENAME Comma%#/1VX{$NOTRENAMED, 'file-name' not renamednd"The specified file is not renamed..Take action based on the accompanying message. 1E<1bd0NOTSAMEDEV, cannot RENAME to a different devicend;An attempt is made to rename a file name from one device toanother.;Use the DCL command COPY instead of the DCL command RENAME.!!]MS, OpenVMS Record '[1M`\WBE, error on write behindManagement Services9An error occurred during an RMS file system operation for which write-behind is specified.9The status value (STV) field of the RAB contains a system4status code that provides more information about the1condition. Take action based on this status code.""}R'u1DREENT, file could not be renamed and recovery failed; file has been lostManagement Services>An RMS $RENAME operation failed and the attempt to recover the>file's directory entry also failed. The file has become a lostfile.>Either use the Analyze/Disk/Repair utility to recover the lost5file, or ask your system manager to recover the file.##k,'j1]p}+WCC, invalid wild card context (WCC) valueManagement Services;The wildcard context value in the NAM block (an input file--processing option) contains an invalid value.correctly and that the NAM block is not inadvertently modified&between RMS file system service calls.$$v%'o1Vi$ACS, error in access control stringManagement Servicesoperation. Limit the number of characters to 42 (not including2quotation marks) and the number of subfields to 3.%% 7'1h{L6BLN, invalid block length for control block (RAB/FAB)Management Services8An invalid value is specified in an RMS FAB or RAB block:length field. Because the control block is invalid, no STS>or STV value can be returned in the FAB or RAB, so this statusvalue is returned only in R0.in progress. This can occur when a record or file operation is;attempted while that record stream or file has an operation6in progress. It can also occur when a record operation8is attempted while a file operation is active, or a file:operation is attempted while a record operation is active.9Correct the program logic to avoid conflicting concurrent operations.''s ''1Xk&FNA, invalid file name string addressManagement Services=Either the file specification string address field in the FAB&REF, invalid key-of-reference = 'nnn'Management Services9The key-of-reference number specified in a key definition=XAB is greater than 254 or is not a defined key for the file.;The status value (STV) field of the FAB provides the key ofreference of the XAB in error.reference of the XAB in error. Verify that the call to the RMS'file system service is coded correctly.-- '#i1FY|FNF, file not foundManagement Services"The specified file does not exist.8Check the file specification and verify that the device,5directory, file name, and file type are all specified=correctly. If a logical name is specified, verify the current 'H1L_PFOP, invalid file optionsManagement Services:The file options parameter in the FAB contains conflictingupdated successfully, but one or more key values duplicate thevalues of other records.'1o=POS, invalid key position (greater than MRS) for key = 'nnn'Management Services;The position of a key segment specified by a key definition=XAB is greater than the maximum record size specified for thefile.;The status value (STV) field of the FAB provides the key of>reference of the XAB in error. Verify that the call to the RMS'file system service is coded correctly.88('{1Yl'OK_NOCURTID, no default TID is definedManagement Services;A $FIND, $FREE, $GET, $RELEASE, or $REWIND service finished3successfully with no default transaction and no TID specified.None.99 )'1Zm(OK_NOP, XAB not filled in for block I/OManagement Services9An RMS $OPEN or $DISPLAY service that specified block I/O=access (BIO) completed successfully. However, one or more key1definition or allocation XABs were not filled in.None.::!'1Re2" WLD, invalid wildcard operationManagement Services>A call to one of the RMS file system services $CREATE, $ERASE,=$ENTER, $OPEN, or $RENAME specified a wildcard in one or moreAn RMS file system request to access a nonexistent record in a%relative file completed successfully.None.==3('/1YlE'SYS, QIO system service request failedManagement Services8The RMS file system encountered an error while trying to>issue a $QIO system service request for an I/O operation. This>message can occur if calls to the RMS file system fail because:of problems such as device errors or insufficient resource=quotas. For example, a 64-bit address is not supported by the>device for this function (NOT64DEVFUNC), the device is offline:(DEVOFFLINE), or a process exceeds its ENQUEUE limit quota;(EXENQLM). The status value (STV) field of the RAB contains=a system status code that provides more information about the condition.=Take corrective action based on the system status code. Check;for a programming error that causes the process to exceed a/resource quota required for RMS I/O operations.>>f$'~1Uhx#WLK, device currently write lockedManagement Services4The hardware device specified for an RMS file system:operation is write-locked for protection, and write access is attempted.>Verify the status of the hardware device; reset the write-lock=switch, if necessary. Notify the system operator if the errorcannot be corrected.??4'[1ex3OK_RRL, record locked against read but read anywayManagement Services:An RMS file system request to read a record locked againstread is completed successfully.None.@@4+'1\o@F*OK_RULK, record relocked in recovery unitManagement Services>A record was successfully relocked using the RMS routine $FIND>or $GET. This record was previously locked and released within>a recovery unit, but the release was deferred until the end ofthat recovery unit.None.AA"'X1Sf!OK_WAT, record locked after waitManagement Services:An RMS file system request to access a record locked afterwait completed successfully.None.BB '~1Ob@DIR, error in directory nameManagement Services9A directory name is specified incorrectly. For example, a;directory or subdirectory name string contains more than 39=characters, or use of a logical name results in more than one)directory name in the file specification.:Verify the syntax of either the directory name in the file7specification or the logical name, if a logical name is specified.CCv1'Y1bu0RSESTK_ALLOC, allocation of KP RSE stack failedManagement Services>An RMS operation failed to allocate sufficient stack space forits Register stack usage.:Check the status value (STV) field of the FAB or RAB for a=system status code that provides additional information about:the condition. Take corrective action based on this statuscode.DD &'l1WjZ%ESA, invalid expanded string addressManagement Servicesis invalid; or the address is in an area of memory that cannot=be read or written by the caller as required; or the expanded5string buffer contains an invalid file specification.The expanded string length field in the RMS NAM block contains;a value of 0; the attempted operation requires the expandedstring.'E1o3x=BUG, fatal RMS condition ('condition-code'), process deletedManagement Services8There is a severe internal index structure inconsistency7in the file. This condition can be caused by any of the following:o Hardware errorso System failures or crashes/o Restoring a file that was backed up using the /IGNORE=INTERLOCK qualifier7o Using STOP/ID on a process with open files or using a8 process that kills processes that have been idle for a specified period of time< Tip: Instead of STOP/ID, use SYS$FORCEX followed by a call< to SYS$DELPRC. SYS$FORCEX allows a standard RMS rundown to8 flush any modified RMS local buffers back to the disk.9o Inadvertent modification of data blocks or buckets in a7 file using block I/O or I/O operations other than RMS6You must rebuild the file to make the index structures:consistent. If necessary, re-create the file or restore it>from a recent backup version. Then use the DCL command CONVERTto try to reorganize the file.:If the problem recurs for no known reason, collect as much8information as possible and contact HP Customer Support.LL*8'1i|7IOP, operation invalid for file organization or deviceManagement Services>An invalid RMS file system operation was attempted. This error1can be caused by any of the following conditions::o An attempt to perform block I/O when block I/O access is not specifiedIRC, illegal record encountered; VBN or record number = 'nnn'Management Services:The byte count field or the control byte for a record in a=file is invalid. For sequential and indexed files, the status:value (STV) field contains the virtual block number of the;block containing the record. For relative files, the status;value (STV) field contains the record number of the corrupt9record. This error can be caused by any of the following:o Hardware errorso System failures or crashes/o Restoring a file that was backed up using the /IGNORE=INTERLOCK qualifier9o Inadvertent modification of data blocks or buckets in a7 file using block I/O or I/O operations other than RMSFTM, network file transfer mode precludes operation (SQO set)Management Services8For network file access, the FAB file option SQO selectscoded correctly. Make sure the source program does not request>the prohibited services or does not specify the SQO FOP option in the FAB.QQ.$'<I1Uh#BUG_DDI, invalid default directoryManagement Services;An internal software error occurred in the RMS file system.6Collect as much information as possible and contact HPCustomer Support.RR. 6'1gz;5FUL, device full (insufficient space for allocation)Management Services7A $CREATE, $EXTEND, or $PUT operation for a file failed;because there is not enough space on the volume or there is9not enough contiguous space (in the case of a request forcontiguous space).;Delete or purge as many files as possible to provide usable=space on the volume, or request the system operator to do so.>If the volume is private and files cannot be deleted, obtain a new volume.SS//'@/1`s.BUG_RU_ABORT_FAIL, recovery unit abort failedManagement Services4An error occurred while the $ABORT_TRANS service was executing..Take action based on the accompanying message.TT01'>/1bu0BUG_RU_COMMIT_FAIL, recovery unit commit failedManagement Services=An error occurred while the $END_TRANS service was executing..Take action based on the accompanying message.UUe11'U1buw0BUG_RURECERR, error during detached RU recoveryManagement Services=A process quota was exhausted during activation of a detachedrecovery unit process.9Check the process quotas ASTLM, ENQLM, and PGFLQUOTA, and9check the SYSGEN parameter VIRTUALPAGECNT (on VAX systems8only) to see if any of these values should be increased.VV25'Go1fy/4ISI, invalid internal stream identifier (ISI) valueManagement Services>The internal stream identifier of the RAB specifies an invalidstream.9This error usually indicates that the stream has not been4connected, or that the RAB is inadvertently altered.WW2+'1\o*MKD, ACP could not mark file for deletionManagement Services;The file system ACP cannot delete the file. This message is9associated with a system status code returned from a file3system ACP QIO request made by the RMS file system.9The status value (STV) field of the FAB contains a system4status code that provides more information about the1condition. Take action based on this status code.XX4 "'5A1Sf!GBC, invalid global buffer countManagement Services4An incorrect global buffer count value is specified.8Specify a global buffer count value in the range of 0 to32,767.YY5)'pH1Zm%(SHR, invalid file sharing (SHR) optionsManagement Services;The file sharing field of the FAB contains an invalid value3for the file organization and the specified access.identification value in error. Verify that the call to the RMS'file system service is coded correctly.; '1PcDME, dynamic memory exhaustedManagement Services;OpenVMS RMS is unable to allocate additional process memory>for the given request (usually an RMS $OPEN or $CONNECT system:service call). Such requests can require a large number of%buffers, large buffer sizes, or both.8This error can also be returned if a process exceeds the9maximum number of open files or open streams. The maximum=is approximately 63 for process permanent files and 16383 for image files.the size or number of requested buffers. If the maximum number>of open files or stream connects has been exceeded, reduce the8number of open files or streams to the acceptable limit.:For process permanent files (such as DCL OPEN, DCL command4procedures using "@filename," SYS$INPUT, SYS$OUTPUT,=SYS$ERROR, and batch log files), the size of available memory;is governed by the SYSGEN parameter PIOPAGES. The number of:buffers and their sizes is governed by the DCL command SET=RMS. Only 63 process permanent files can be open at once; any6attempt to open more such files produces this message.9For image files, process memory is governed by the SYSGEN8parameter IMGIOCNT and the UAF parameter PGFLQUOTA. (VAX9systems can also use the SYSGEN parameter VIRTUALPAGECNT,4which became obsolete on Alpha systems starting with6Version 7.0. See Sys_Parameters help for details about>VIRTUALPAGECNT.) The size and number of buffers are controlled:by the application, the DCL command SET RMS, or both. Only<16383 image files or record streams can be open at once; any6attempt to open more such files produces this message.9Image buffer space can also be controlled with the linkerfile (if a new one is to be created), or use the SUP option in=the FOP parameter in the FAB to request that an existing filebe superseded.;On a backup save operation, either do not specify a version*number or specify a higher version number.%%B "'Xt1Sf2!ATW, file attributes write errorManagement Services8A write error occurred during an attempt by the RMS filesystem to write a file header.;Depending on the operation, the status value (STV) field in>the FAB or RAB contains a status code that provides additional:information about the condition. Take action based on this:status code. Check the status of the device and repeat therequest.8The header block may be bad. If the error occurs on many6files, the disk or drive may be bad. Notify the systemmanager.&&BI 'H1Qd[RAT, invalid record attributesManagement Services>The record attributes field of the FAB specified for a $CREATE:or an $OPEN operation contains a value other than BLK, CR,4FTN, or PRN, or an invalid combination is specified.The index of an indexed file could not be properly initialized when inserting the first record.:Re-create the file. If the problem recurs, collect as much8information as possible and contact HP Customer Support.))B'rH1M`RBF, invalid record bufferManagement Services9The record buffer address of the RAB specifies an area of7memory that cannot be correctly accessed by the caller.record stream that has an outstanding request. The outstanding:operation may be asynchronous; or the failed operation was6attempted at an AST level, or in an inner access mode.>Modify the source program, if necessary, to detect and respond;to the condition. Enter a $WAIT request before entering anyadditional requests.--B'+1J]NXR, nonexistent recordManagement Servicesprimary data record. This condition (commonly referred to as aNone. If the associated file was opened with write access, RMS=transparently cleans up the SIDR element before returning theNXR status value...B6' 1Na;HTMO, timeout period expiredManagement Services;An RMS file system operation specified a timeout period and>the timeout period expired before the operation completed. The;user buffer contains the input characters (if any) received"before the timeout period expired.9If this message occurs during the login procedure, repeatThe last keyed access to the file exceeded a maximum iteration;count for restarting the operation at the root index bucket9for the key of reference. This condition can occur if the9index structure has become inconsistent. The status value/(STV) of the RAB contains the key of reference.6Convert the file and retry the operation. If the error&persists, contact HP Customer Support.00B ?'1p~>IFA, illegal file attributes detected (file header corrupted)Management Services6The content of the file header is corrupt; the data isAn attempt to access a record by its file address (RFA) failed$because the record has been deleted.>Modify the program, if necessary, to detect and respond to the condition.33Bk4'u1ex}3NAM, invalid NAM block or NAM block not accessibleManagement Servicesattempted to open an ANSI magnetic tape file for write access,;and the file has a nonzero value for buffer offset. The RMS=file system will not allow you to create a magnetic tape file;with nonzero buffer offset. However, the file for input and1output may be accessed if block I/O is specified.>Correct the type of access requested, or change the attributes of the file.77B 3'1dwg2IFI, invalid internal file identifier (IFI) valueManagement Services>The internal file identifier field of the FAB is invalid. This:usually means that the file is not open for a service that=requires it to be open (Close, Connect, Display, and Extend),7or is open for a service that requires it to be closed.>Check for a programming error. Verify the logic of the programreference of the XAB in error. Verify that the call to the RMS'file system service is coded correctly.::B-'J1^qy,KEY, invalid record number key or key valueManagement Services9An invalid key value is specified in one of the followingways:Modify the program, if necessary, to detect and respond to the condition.;;B,''H1Xk>&RST, invalid resultant string addressManagement Servicesan address that is in an area of memory that cannot be writtenby the caller.STR, user structure (FAB/RAB) became invalid during operationManagement Services=The FAB or RAB is invalid. This error can be detected only by testing R0.;Verify that the call to the RMS service is coded correctly.TNS, terminator not seenManagement Services=An RMS $GET service request to a terminal terminated when the;user buffer was filled to capacity. No record terminator is:encountered. Subsequent $GET service requests can retrieve*additional characters from the input line.>Modify the source program, if necessary, to detect and respond7to the condition, or provide a user buffer large enough9to contain an entire input line, including the terminator sequence.>>B'H1K^*RSZ, invalid record sizeManagement ServicesAn RMS $PUT request is attempted for a sequential file that is0not currently positioned at the end of the file.6Verify that the call to the RMS file system service is;programmed correctly. Modify your program, if necessary, to$detect and respond to the condition.AABE's1vDNET, network operation failed at remote node; DAP code = 'xxxxxxxx'Management Services5The file system of the target node cannot perform the9requested operation, and the RMS file system is unable to=map the data access protocol status code into a more specific=RMS file system completion code. The status value (STV) field/of the FAB or RAB contains the DAP status code.>u*'lH1[n")RFA, invalid record's file address (RFA)Management Services>The record file address field of the RAB contains a value of 0,for RFA access in a $GET or $FIND operation.provides more information about the condition. Take corrective!action based on this status code.alue can be returned in the FAB or RAB, so this$status value is returned only in R0./OVERRIDE=NO_FORCED_ERROR qualifier and retry the operation.W4rRMS, OpenVMS Record 9'_1j}p8NETBTS, network buffer too small for 'size' byte recordManagement Servicesfield XAB$W_LRL after opening the file with the XABFHC chained to the FAB.8Increase the network buffer size for the process. Either=execute the DCL command SET RMS_DEFAULT/NETWORK_BLOCK_COUNT=n=on the local node or, from within the program, set the XABITM;item XAB$_NET_BLOCK_COUNT to 'n' when opening the file withcompleted successfully, and the RMS file open is not required.=This message is provided for Compaq-supplied component usage.None.5'1fy4KNM, key name buffer not accessible for key = 'nnn'Management Services=The key name buffer address in a key definition XAB specifies:an area of memory that cannot be correctly accessed by thecaller.;The status value (STV) field of the FAB provides the key of:reference of the XAB in error. Verify that the call to the:RMS file system service is coded correctly; in particular,>verify that the buffer is readable for a $CREATE operation and+writable for a $DISPLAY or $OPEN operation.!4'41ex33RTB, 'nnn' byte record too large for user's bufferManagement Services6A record that was retrieved from a file by an RMS $GETbe rebuilt or reconfigured to provide a buffer large enough to>read the failing record from the file. alternatively, the sizeThe requested operation cannot be performed by the file system;at the remote node. The status value (STV) field contains areference of the XAB in error. Verify that the RMS file systemservice is coded correctly. g<'_1my;COD, invalid or unsupported type field in XAB at 'address'Management Services>The XAB at the indicated address contains an invalid type codefield, or the XAB is not valid.not specify a length of 4 bytes, or the key size specified foruntil the recovery unit is finished with a call to the $END_RUor $ABORT_RU service. {='H1nEfailure during RMS RRV updating. All records are accessible by4primary key only. RRV errors may subsequently occur.>Reorganize the file using the CONVERT command with the /NOSORT qualifier.g ('k1Yly'ENQ, ENQ system service request failedManagement Services9An $ENQ or $DEQ system service invoked by RMS failed. The8status value (STV) field of the FAB contains a code that.provides more information about the condition.6Correct the condition described in the STV field. Take3corrective action based on this system status code. '1QdENT, ACP enter function failedManagement Services7An attempt to enter a file specification in a directory>failed. This message is associated with a status code returned7from a file system ACP QIO request made by the RMS filesystem.9The status value (STV) field of the FAB contains a system4status code that provides more information about the1condition. Take action based on this status code.A'H1r@LEX, invalid $EXTEND for area 'nnn' containing an unused extentManagement Services:An RMS $EXTEND operation attempted to extend the specified:area, and an unused extent is already allocated. Each areaTOWDR, timed out waiting for detached RU recovery to completeManagement Services8Detached recovery did not complete in the allotted time.=Verify that the detached recovery process is still active andallow it to finish.;'d1M`MPBF, invalid prompt bufferManagement Services9The prompt buffer address of the RAB specifies an area of)memory that cannot be read by the caller.the RMS file system does not support the function in a networkcontext at the local node.=Determine which functions are supported by both the local andthat meet the file specification on a wildcard operation. This:is a normal return status that indicates the end of an RMS$SEARCH or $REMOVE operation.>None required, unless you wish to modify the source program to%detect and respond to this condition.2'4/1cv1ACC_AIJ, after image journal can not be accessedManagement Services3RMS journaling cannot open the after-image journal..Take action based on the accompanying message.5'k1fy4SUPERSEDE, created file superseded existing versionManagement Services9The file created by an RMS $CREATE operation successfully0superseded an existing version of the same file.None.3'5/1dw2ACC_BIJ, before image journal can not be accessedManagement Services4RMS journaling cannot open the before-image journal..Take action based on the accompanying message.C :'mj1k~U9ENV, support for RMS service call or feature not presentManagement Services:An image attempted an RMS file system function that is not1supported in this version of the RMS file system.:Consult the system manager to find out which functions are.supported or to include your desired function.J*'21[n\)SUPPORT, network operation not supportedManagement Services:The RMS file system rejected the request because it is not=supported between two network systems. The STV field contains>either another RMS file system completion code or a FAL status;code, depending on whether the RMS file system at the local=node or FAL at the remote node could not support the request.:The status value (STV) field contains either an RMS status9code or a $FAC status code that provides more information9about the condition. Take corrective action based on this status code. b 'P1L_$tEOF, end of file detectedManagement Services7An end-of-file condition occurred on an RMS file systemservice.>For Find or Get services, the program attempted to read beyondthe last record in the file.>For a Write (block I/O) service, an end-of-file detected for a9sequential file implies that the file cannot be extended.Verify that the RMS file system service is coded correctly and/that the FDL includes a primary key definition.""3'n1dw2PENDING, asynchronous operation not yet completedManagement Servicesentered. The remainder of the escape sequence will be returnedwith the next input operation.8Increase the size of the user record buffer to allow for9escape sequences, or modify the program, if necessary, to'recognize and respond to the condition.&&4'6/1ex3ACC_RUJ, recovery unit journal can not be accessedManagement Services5RMS journaling cannot open the recovery unit journal..Take action based on the accompanying message.''B''1K^TBES, bad escape sequenceManagement Services&A terminal escape sequence is invalid.:The characters read up to the escape sequence are returned;in the user record buffer. Modify the program to detect and>respond to the condition, or reenter the input, specifying thecorrect escape sequence.(( 3'1dw2FLG, invalid key definition flags for key = 'nnn'Management Services>Either XAB$V_CHG or XAB$V_NUL is incorrectly specified for the=primary key definition XAB, or a reserved key definition flag is specified.;The status value (STV) field of the FAB provides the key of>reference of the XAB in error. Verify that the call to the RMS'file system service is coded correctly.)) ,'}1]p+FLK, file currently locked by another userManagement Services8An attempt to open or create a file failed. Another user;has the file open in a mode incompatible with the attemptedaccess.>Wait until the other user has deaccessed the file. If the file>is to be shared, verify that the SHR option is selected in the;FAB for all users that need to access the file. If the file=cannot be shared, modify the program to detect and respond tothe condition by waiting.**Q'z1*DSEG, overlapping segments or segmented key must be string for key = 'nnn'Management ServicesRMS XABITM item codes for stored semantics or access semantics)have been used in an inconsistent manner.>Check the documentation on the use of RMS semantics and verify>that the application is correctly calling the RMS file system...9'Y1j}8PLG, error detected in file's prolog (reconstruct file)Management Services8The contents of the file have been corrupted because thefile's prolog has been damaged.Reconstruct the file.//"'1Sf!BKS, bucket size too large (FAB)Management Services>The bucket size specified in the FAB is larger than 63. If the=bucket size is specified as 0, the maximum record size is toolarge.record entered. $PUT operations in sequential access mode must+be in ascending order of primary key value.:Modify the program, if necessary, to detect and respond toThe user record buffer address of the RAB specifies an area of/memory that cannot be written to by the caller.The bucket size field specified in an allocation XAB is larger,than 63 or is too small for the record size.9The status value (STV) field of the FAB provides the area;identification of the XAB in error. Verify that the call toindicates that the file cannot be processed by this version ofthe RMS file system.;Verify your version of the RMS file system; use the correctversion to process the file. of the file header is corrupt; the data isAn attempt to access a record by its file address (RFA) failed$because the record has been deleted.>Modify the program, if necessary, to detect and respond to the condition.33Bk4'u1ex}3NAM, invalid NAM block or NAM block not accessibleManagement Servicesattempted to open an ANSI magnetic tape file for write access,;and the file has a nonzero value for buffer offset. The RMS=file system will not allow you to create a magnetic tape file;with nonzero buffer offset. However, the file for input and1output may be accessed if block I/O is specified.>Correct the type of access requested, or change the attributes of the file.77B 3'1dwg2IFI, invalid internal file identifier (IFI) valueManagement Services>The internal file identifier field of the FAB is invalid. This:usually means that the file is not open for a service that=requires it to be open (Close, Connect, Display, and Extend),7or is open for a service that requires it to be closed.>Check for a programming error. Verify the logic of the programreference of the XAB in error. Verify that the call to the RMS'file system service is coded correctly.::B-'J1^qy,KEY, invalid record number key or key valueManagement Services9An invalid key value is specified in one of the followingways:Modify the program, if necessary, to detect and respond to the condition.;;B,''H1Xk>&RST, invalid resultant string addressManagement Servicesan address that is in an area of memory that cannot be writtenby the caller.STR, user structure (FAB/RAB) became invalid during operationManagement Services=The FAB or RAB is invalid. This error can be detected only by testing R0.;Verify that the call to the RMS service is coded correctly.TNS, terminator not seenManagement Services=An RMS $GET service request to a terminal terminated when the;user buffer was filled to capacity. No record terminator is:encountered. Subsequent $GET service requests can retrieve*additional characters from the input line.>Modify the source program, if necessary, to detect and respond7to the condition, or provide a user buffer large enough9to contain an entire input line, including the terminator sequence.>>B'H1K^*RSZ, invalid record sizeManagement ServicesAn RMS $PUT request is attempted for a sequential file that is0not currently positioned at the end of the file.6Verify that the call to the RMS file system service is;programmed correctly. Modify your program, if necessary, to$detect and respond to the condition.AABE's1vDNET, network operation failed at remote node; DAP code = 'xxxxxxxx'Management Services5The file system of the target node cannot perform the9requested operation, and the RMS file system is unable to=map the data access protocol status code into a more specific=RMS file system completion code. The status value (STV) field/of the FAB or RAB contains the DAP status code.>u*'lH1[n")RFA, invalid record's file address (RFA)Management Services>The record file address field of the RAB contains a value of 0,for RFA access in a $GET or $FIND operation.provides more information about the condition. Take corrective!action based on this status code.alue can be returned in the FAB or RAB, so this$status value is returned only in R0./OVERRIDE=NO_FORCED_ERROR qualifier and retry the operation.C}dRMSREC, RMS Recovery= t1nvfor after-image journaling more than once, but you have backed;up the data file only once. When you enter the RECOVER/RMS_INVSTE, invalid start transaction record 'transaction-record' Utility9The journal contains an invalid start transaction record.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.z U1QY7FNDFIL, found file 'file-spec' Utility5This message shows the file specification of the data9file that was incorrectly specified with the RECOVER/RMS_1LELOGNAM, logical name: 'logical name', translated device name 'device name' Utility:This message displays both the logical name and the device;name for the disk on which RMS journaling will look for thejournal.=Determine if this is the device on which the journal resides. o 1;FORCED_COMMIT, WARNING: Backup file may be inconsistent by2 committing unresolved transactions Utility9The RMS Recover utility committed unresolved transactions8while rolling forward a backup file, and the backup file:could be inconsistent with the original data file. The SET9FILE/NORU_ACTIVE command was used on the data file, which7wrote forced commit records to the after-image journal.None.  7/1QYCONNERR, error connecting file Utility6RMS recovery cannot connect a record stream to a file..Take action based on the accompanying message.  :7/1ks9ERRREC, error occurred performing recovery unit rollback Utility6Detached recovery could not roll back a recovery unit..Take action based on the accompanying message.  .X/1_g-ERRRECFIL, error recovering file 'file-spec' Utility=This header message displays the file specification of a filethat cannot be recovered..Take action based on the accompanying message. 7)/1hp6SETUPERR, error initializing detached recovery server Utility(Detached recovery cannot be initialized..Take action based on the accompanying message. ~5W1fn4NOCHANGES, No changes were made to file 'file-spec' Utility=The RECOVER/RMS_FILE/FORWARD or the RECOVER/RMS_FILE/BACKWARD;command applied no changes to the backup file or data file,sure that either the journal is empty or the data file has not>been updated since it was last backed up. If you know that the;journal is not empty or that the data file has been updated=since it was last backed up, collect any relevant information and contact HP Customer Support.$;1lt:NOTCOMREC, file was not completely recovered as requested Utility>The RMS Recovery utility processed only a part of the journal.9Either the journal contained corrupted data, or a seriouserror occurred.8Collect any relevant information and contact HP Customer9Support. Then recover the file using the /UNTIL qualifierjournal record entry processed before the RMS Recovery utilityencountered a fatal error.the program region or a larger image I/O section. You may also=choose to increase the value of the System Generation utility(SYSGEN) parameter PIOPAGES.=1Z01bj0AIJDEVFID, after-image journal file 'file-spec' Utility9The file is marked for both after-image and recovery unit7journaling, and a failure occurs before a recovery unit8completes. The next time RMS accesses the file, detached;recovery attempts to mark the transaction as aborted in the9after-image journal. This message indicates that detached8recovery was unable to write to the after-image journal./Take action based on the accompanying messages.=46/1em3OPENAIJERR, error opening after-image journal file Utility5Detached recovery cannot open an after-image journal..Take action based on the accompanying message.>56/1fn4OPENBIJERR, error opening before-image journal file Utility5Detached recovery cannot open a before-image journal..Take action based on the accompanying message.f?F21wFxENOTFILDEV, not a file-oriented device or directory-structured device Utilityshould be used with the /JOURNAL qualifier to the RECOVER/RMS_ FILE command.Detached recovery received an invalid mailbox message from theinitiating process.Contact HP Customer Support.!!:X /:1`hL.INCJNLFIL, incorrect journal file 'file-spec' Utility2A journal file was incorrectly specified using the6RECOVER/RMS_FILE/JOURNAL command. The associated error6messages contain the file specification of the correctjournal.9Correct and reenter the RECOVER/RMS_FILE/JOURNAL command.""Y -1^f,INCJNLVER, incompatible journaling versions Utility>A new version of RMS journaling was installed. The new journal9format is incompatible with the journal format of the oldversion.;Reinstall the old version of RMS journaling and recover all;files marked for after-image journaling. Be sure that therehas not been recovered. The associated error message describes6the error status from the License Management facility.4Either attempt to recover the file on a node that is=authorized to perform RMS journaling and recovery, or fix the=error condition specified by the License Management facility.=See the HP OpenVMS License Management Utility Manual for more information.334C1em3UNSUPPRELOP, unsupported relative record operation Utility7A journal entry contains an unsupported relative record operation.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.446E1go5UNSUPPSEQOP, unsupported sequential record operation Utility9A journal entry contains an unsupported sequential record operation.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.55,-/1]e+JNLWRITEERR, error writing to journal file Utility,Detached recovery cannot write to a journal..Take action based on the accompanying message.66} ;K1ltD:DATETIME, date/time of last record processed: 'date-time' Utility>This message shows the date and time of the last valid record,;if any, processed by the RECOVER/RMS_FILE command. The /LOG>qualifier must be specified to the RECOVER/RMS_FILE command toreceive this message.=Be sure that the last valid record processed is as up-to-date as possible.77r371dl2INVJNLFAC, invalid facility code in journal entry Utility6The facility code field of a journal entry is invalid.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.88f!=1RZx INVJNLFIL, invalid journal file Utility1Zb(INVJNLIDX, invalid journal index number Utility=The journal index number field of a journal entry is invalid.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.::e*31[cw)INVJNLLRL, invalid longest record length Utility2There is an invalid journal record in the journal.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.;;}/F1`h.INVJNLTYP, invalid type code in journal entry Utility>The journal contains a journal entry with an invalid type codefield.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.<<6071aiH/THRDCRERR, error creating multi-thread routine Utility6Detached recovery cannot create a multithread routine.9Determine whether the disk on which the journal is stored9is corrupted (see the OpenVMS Record Management Utilities3Reference Manual), and contact HP Customer Support.==V1bh=ROLLFORWREV, rolling file 'file-spec' forward to 'date/time'B before last revised date of 'date/time'; file may be inconsistent Utility>The backup file is being rolled forward to a time earlier than>@3>1dlR2THRDERR, error occurred with multi-thread routine Utility=Detached recovery failed while running a multithread routine.9Determine whether the disk on which the journal is stored9is corrupted (see the OpenVMS Record Management Utilities3Reference Manual), and contact HP Customer Support.??U!,1RZg INVLDRENT, invalid leader entry Utility+The leader entry in the journal is invalid.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.@@\1ATIMEOUT, detached recovery unit recovery timed out trying to get mailbox message Utility=Detached recovery is unable to receive a mailbox message fromfile specification, then reenter the RECOVER/RMS_FILE command.BBW1CJOPENINFH, error opening journal file 'file-id' as input from file header Utilitytape. After restoring the backup, reenter the RECOVER/RMS_FILEWhen a file specification is not available, this message shows8the volume label and file identification of the journal..Take action based on the accompanying message.LL *5/1[c)DELACE, error deleting recovery unit ACE Utility4Detached recovery cannot delete a recovery unit ACE..Take action based on the accompanying message.MM *t1[c)FILBACKWARD, 'file-spec' rolled backward UtilityDetached recovery received a message from a process other thanthe originating process.Contact HP Customer Support.RR 39/1dl2DELRUJ, error deleting recovery unit journal file Utility8Detached recovery cannot delete a recovery unit journal..Take action based on the accompanying message.SS"+/1S[!READERR, error reading from file Utility*RMS recovery cannot read from a data file..Take action based on the accompanying message.TT (r1Ya'FILFORWARD, 'file-spec' rolled forward UtilityAn attempt was made to recover a data file that was not markedfor after-image journaling.>If the wrong data file was specified, reenter the RECOVER/RMS_:FILE command, specifying the correct data file. Otherwise,If the wrong data file was specified, reenter the RECOVER/RMS_8FILE/BACKWARD command, specifying the correct data file.:Otherwise, mark the data file for before-image journaling.``Y"/1S[k!INVRECLEN, invalid record length Utility.A record in the journal has an invalid length.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.aa 81iq 7ENTNOTDJ, first journal entry must be define_jnl entry Utility8The first journal entry in a before-image or after-image9journal is not a define_jnl entry. The journal is invalid&and you cannot use it to recover data.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.bbx-C1^f,INVRELOP, invalid relative record operation Utility9The relative record operation field in a journal entry isinvalid.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.cc&//1W_%ACCFILERR, error accessing data file Utility.Detached recovery cannot access the data file..Take action based on the accompanying message.s status code.alue can be returned in the FAB or RAB, so this$status value is returned only in R0./OVERRIDE=NO_FORCED_ERROR qualifier and retry the operation. >RMSREC, RMS Recovery ~/1IQDEVFID, file 'file-id' Utility=When a data file specification is not available, this message9shows the device name and file identification of the datafile..Take action based on the accompanying message. ~/1LTDEVICEFID, file 'file-id' Utility=When a data file specification is not available, this message9shows the device name and file identification of the datafile..Take action based on the accompanying message.b%51V^t$INVRFA, invalid record file address Utility4The journal contains an invalid record file address.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.'z/1X` &VOLFID, file 'volume-label' 'file-id' Utility>When a file specification is not available, this message shows:the volume label and file identification of the data file..Take action based on the accompanying message.; Z1xMAINTNONEXP, process initiating detached recovery unit recovery is nonexistent Utility:Detached recovery completed its recovery successfully, but>the process initiating detached recovery has been deleted. The1bj0INVSIZE, invalid virtual memory allocation size Utility=RMS recovery attempted to allocate 0 bytes of virtual memory.Contact HP Customer Support.-%1V^9?$NUMRECS, 'number' records processed Utility9This message shows the number of records processed by the9RECOVER/RMS_FILE/FORWARD or the RECOVER/RMS_FILE/BACKWARD;command. You receive this message when you specify the /LOG*qualifier to the RECOVER/RMS_FILE command.None.pport. Then recover the file using the /UNTIL qualifierjournal record entry processed before the RMS Recovery utilityencountered a fatal error.the program region or a larger image I/O section. You may also=choose to increase the value of the System Generation utility(SYSGEN) parameter PIOPAGES.=1Z01bj0AIJDEVFID, after-image journal file 'file-spec' Utility9The file is marked for both after-image and recovery unit7journaling, and a failure occurs before a recovery unit8completes. The next time RMS accesses the file, detached;recovery attempts to mark the transaction as aborted in the9after-image journal. This message indicates that detached8recovery was unable to write to the after-image journal./Take action based on the accompanying messages.=46/1em3OPENAIJERR, error opening after-image journal file Utility5Detached recovery cannot open an after-image journal..Take action based on the accompanying message.>56/1fn4OPENBIJERR, error opening before-image journal file Utility5Detached recovery cannot open a before-image journal..Take action based on the accompanying message.f?F21wFxENOTFILDEV, not a file-oriented device or directory-structured device Utilityshould be used with the /JOURNAL qualifier to the RECOVER/RMS_ FILE command.Detached recovery received an invalid mailbox message from theinitiating process.Contact HP Customer Support.!!:X /:1`hL.INCJNLFIL, incorrect journal file 'file-spec' Utility2A journal file was incorrectly specified using the6RECOVER/RMS_FILE/JOURNAL command. The associated error6messages contain the file specification of the correctjournal.9Correct and reenter the RECOVER/RMS_FILE/JOURNAL command.""Y -1^f,INCJNLVER, incompatible journaling versions Utility>A new version of RMS journaling was installed. The new journal9format is incompatible with the journal format of the oldversion.;Reinstall the old version of RMS journaling and recover all;files marked for after-image journaling. Be sure that therehas not been recovered. The associated error message describes6the error status from the License Management facility.4Either attempt to recover the file on a node that is=authorized to perform RMS journaling and recovery, or fix the=error condition specified by the License Management facility.=See the HP OpenVMS License Management Utility Manual for more information.334C1em3UNSUPPRELOP, unsupported relative record operation Utility7A journal entry contains an unsupported relative record operation.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.446E1go5UNSUPPSEQOP, unsupported sequential record operation Utility9A journal entry contains an unsupported sequential record operation.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.55,-/1]e+JNLWRITEERR, error writing to journal file Utility,Detached recovery cannot write to a journal..Take action based on the accompanying message.66} ;K1ltD:DATETIME, date/time of last record processed: 'date-time' Utility>This message shows the date and time of the last valid record,;if any, processed by the RECOVER/RMS_FILE command. The /LOG>qualifier must be specified to the RECOVER/RMS_FILE command toreceive this message.=Be sure that the last valid record processed is as up-to-date as possible.77r371dl2INVJNLFAC, invalid facility code in journal entry Utility6The facility code field of a journal entry is invalid.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.88f!=1RZx INVJNLFIL, invalid journal file Utility1Zb(INVJNLIDX, invalid journal index number Utility=The journal index number field of a journal entry is invalid.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.::e*31[cw)INVJNLLRL, invalid longest record length Utility2There is an invalid journal record in the journal.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.;;}/F1`h.INVJNLTYP, invalid type code in journal entry Utility>The journal contains a journal entry with an invalid type codefield.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.<<6071aiH/THRDCRERR, error creating multi-thread routine Utility6Detached recovery cannot create a multithread routine.9Determine whether the disk on which the journal is stored9is corrupted (see the OpenVMS Record Management Utilities3Reference Manual), and contact HP Customer Support.==V1bh=ROLLFORWREV, rolling file 'file-spec' forward to 'date/time'B before last revised date of 'date/time'; file may be inconsistent Utility>The backup file is being rolled forward to a time earlier than>@3>1dlR2THRDERR, error occurred with multi-thread routine Utility=Detached recovery failed while running a multithread routine.9Determine whether the disk on which the journal is stored9is corrupted (see the OpenVMS Record Management Utilities3Reference Manual), and contact HP Customer Support.??U!,1RZg INVLDRENT, invalid leader entry Utility+The leader entry in the journal is invalid.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.@@\1ATIMEOUT, detached recovery unit recovery timed out trying to get mailbox message Utility=Detached recovery is unable to receive a mailbox message fromfile specification, then reenter the RECOVER/RMS_FILE command.BBW1CJOPENINFH, error opening journal file 'file-id' as input from file header Utilitytape. After restoring the backup, reenter the RECOVER/RMS_FILEWhen a file specification is not available, this message shows8the volume label and file identification of the journal..Take action based on the accompanying message.LL *5/1[c)DELACE, error deleting recovery unit ACE Utility4Detached recovery cannot delete a recovery unit ACE..Take action based on the accompanying message.MM *t1[c)FILBACKWARD, 'file-spec' rolled backward UtilityDetached recovery received a message from a process other thanthe originating process.Contact HP Customer Support.RR 39/1dl2DELRUJ, error deleting recovery unit journal file Utility8Detached recovery cannot delete a recovery unit journal..Take action based on the accompanying message.SS"+/1S[!READERR, error reading from file Utility*RMS recovery cannot read from a data file..Take action based on the accompanying message.TT (r1Ya'FILFORWARD, 'file-spec' rolled forward UtilityAn attempt was made to recover a data file that was not markedfor after-image journaling.>If the wrong data file was specified, reenter the RECOVER/RMS_:FILE command, specifying the correct data file. Otherwise,If the wrong data file was specified, reenter the RECOVER/RMS_8FILE/BACKWARD command, specifying the correct data file.:Otherwise, mark the data file for before-image journaling.``Y"/1S[k!INVRECLEN, invalid record length Utility.A record in the journal has an invalid length.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.aa 81iq 7ENTNOTDJ, first journal entry must be define_jnl entry Utility8The first journal entry in a before-image or after-image9journal is not a define_jnl entry. The journal is invalid&and you cannot use it to recover data.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.bbx-C1^f,INVRELOP, invalid relative record operation Utility9The relative record operation field in a journal entry isinvalid.=See the Analyze/Disk_Structure utility documentation to learn;how to determine if the portion of the disk that stores the=journal is corrupt. Once you have determined whether the disk(is corrupt, contact HP Customer Support.cc&//1W_%ACCFILERR, error accessing data file Utility.Detached recovery cannot access the data file..Take action based on the accompanying message.s status code.alue can be returned in the FAB or RAB, so this$status value is returned only in R0./OVERRIDE=NO_FORCED_ERROR qualifier and retry the operation.>}~}>VRTPAD111111REM, Remote Terminal Support and SET HOST Command>UN, Run Detached Ut/<1`e.INVUIC, 'UIC' is an invalid UIC specificationility;The UIC value specified with the /UIC qualifier is invalid.Enter a valid UIC.>, 'N51X]&ILLVAL, 'time' is an illegal CPU timeility9The CPU time limit entered with the /TIME_LIMIT qualifiervalue is too large.4Reenter the RUN command with a valid CPU time limit.>5<J1mr;PROC_ID, identification of created process is 'process-id'ility8This message displays the process identifier for a newlycreated process.None.>I >z=1ot+=GETJPI, failed to obtain default job and process informationility8The $GETJPI system service failed to get process and job7information used to create a new subprocess or detachedprocess.b !;c1RW CREPRC, process creation failedility:The creation of the subprocess or detached process failed.;Correct the problem described by the $CREPRC system service&error message and reenter the command.>0v 881in B7CVTERR, could not convert entity 'value' using 'value'ility7Time specified with the /DELAY, /INTERVAL, or /SCHEDULE;qualifier is not in the proper format, or the value entered'cannot be converted to a numeric value.7Reenter the qualifier value (time or number) correctly.>ODQ1uzaCSCHDWK, failed to schedule wakeup request for process 'process-id'ility;The $SCHDWK system service cannot schedule a wakeup call tothe created process.;Take action based on the error message returned by $SCHDWK.>Note that the created process will not be awakened, so it mustbe deleted and re-created. >OFF, DIGITAL Stan!%_1Rc UDS, undefined symbol: 'string'dard Runoff (DSR) 1%C1bsk0FNA, flag not allowed in this context: 'string'dard Runoff (DSR);(1) A flag is used that requires that text directly precede1*%mj1[lC)MEI, missing at least one .ENDIF commanddard Runoff (DSR)^%V1F?WFR, .RESTORE not in same file as .SAVE/.SAVEALL: 'additional- locational-information'dard Runoff (DSR);A .RESTORE directive cannot be issued for a .SAVE directive>from within a require file if that .SAVE directive occurs in a*higher level file or another require file. )%/.1Zk(BMS, bad margin specification: 'string'dard Runoff (DSR).An illegal value is used for a margin setting.-Correct the margin setting in the input file.> &%k)1Wh%UME, unmatched end command: 'string'dard Runoff (DSR)=An .END command (for example, .END NOTE) is detected, but the,associated beginning command (.NOTE) is not.(Insert the associated beginning command.>  N%K@1BDIGITAL Standard Runoff Version V3.0: 'number' diagnostic messages reporteddard Runoff (DSR)9This standard error message specifies the number of errormessages output.6Refer to the specific error messages accompanying thismessage.> 9%C1j{8DIGITAL Standard Runoff Version V3.0: No errors detecteddard Runoff (DSR)=This message indicates the successful processing of a file byDSR.None.>,%H1]n+MFN, number illegal or malformed: 'string'dard Runoff (DSR)6A plus sign (+) or a minus sign (-) is used without anumerical value.Insert the numerical value.>:%OB1k| 9MFS, missing or improperly delimited file spec: 'string'dard Runoff (DSR):The file specification for the DSR command .REQUIRE is notdelimited properly.:Enclose the file specification in apostrophes or quotationmarks.>L%1}COn output page 'pn'; on input line 'ln' of page 'pn' of file 'file- name'dard Runoff (DSR)the page (pn) in the output file affected by the error and the." #% 1Te @"EVL, too many variables: 'string'dard Runoff (DSR)6The maximum of 20 variables has been exceeded with the;inclusion of the specified .VARIABLE or conditional command>(.IF, .IFNOT, .ENDIF, or .ELSE); the command in error has beenignored.Reduce the number of variables.>F) )%Y1ZkX(COO, can't open output file 'file-name'dard Runoff (DSR)>The output file specification is erroneous, or you do not havewrite access to the file.;Check the file specification for errors, or check to see ifd2 +%v1\mv*COR, can't open required file 'file-name'dard Runoff (DSR)3 "%[,1Sd!FWF, footnotes won't fit on pagedard Runoff (DSR)5*%C1[l)ITC, index entry too complicated or longdard Runoff (DSR)6-%Y+1^o,ITD, .IF commands nested too deep: 'string'dard Runoff (DSR)7The number of nested conditional commands (.IF, .IFNOT) exceeds the maximum limit of 10.*Reduce the number of conditional commands.>71%kN1bs,0BVN, missing or illegal variable name: 'string'dard Runoff (DSR)9The name specification for a DSR command (.VARIABLE, .IF,0.IFNOT, .ENDIF, or .ELSE) is missing or illegal.7)%51Zk(MNL, missing number or letter: 'string'dard Runoff (DSR)4A required numerical value or text value is missing.Insert the missing value.>9%%\1Vg$LTC, line too complicated: 'string'dard Runoff (DSR)>There is excessive use of boldface, underlining, overstriking,and hyphenation on the line.Simplify the line.>? (%P>1Yj'DNS, .NO SPACE illegal in this contextdard Runoff (DSR)>A .NO SPACE command has been inserted following a command thatissues a .BREAK.=Remove the .NO SPACE command, or put it in the correct place.>F<%N:1m~;SKC, .ENDIF/.ELSE not in same file as .IF/.IFNOT: 'string'dard Runoff (DSR)=An attempt was made to use associated conditional commands inseparate files.9Put the associated conditional commands in the same file.>IP ;%^1l}[:GFC, given footnote count incorrect, correct value is 'n'dard Runoff (DSR)8The actual number of lines generated for the footnote is;greater or less than the count specified with the .FOOTNOTE n command.:None. If you do not want the message to appear, remove the"number from the .FOOTNOTE command. >Lg &%j1Wh^%CRF, can't read back saved footnotesdard Runoff (DSR)=DSR has successfully written footnote information to the work>file but cannot read it back. One or more 001RNO.TMP files mayalready exist.;Delete any 001RNO.TMP files, and reprocess the file. If the-problem continues, notify the system manager.!!>i!%< 1Rc IVS, illegal /VARIANT qualifierdard Runoff (DSR);The name specification for conditional commands is invalid.Correct the name specification."">j?%Z11p >MQS, missing or improperly delimited quoted strings: 'string'dard Runoff (DSR)=A beginning or ending apostrophe or quotation mark is missingfrom the quoted text value.0Insert the missing apostrophe or quotation mark.##>k /%3&1`q.CRP, can't recognize page on /PAGES qualifierdard Runoff (DSR)2A page range specification is illegally formatted.%Correct the page range specification.$$>kq%&1=MRC, another 'n' crossed margin or bad right indent attempts2 detected and accumulated. Now being reporteddard Runoff (DSR)5Horizontal spacing errors were detected and are being=reported. These errors are triggered by .CHAPTER or .APPENDIX>commands or by the end-of-file. The count of errors is cleared>after each .CHAPTER and .APPENDIX command or after the end-of-file.%Check the margin and indent settings.%%> l9%z&1j{8MRG, margins crossed, or attempted indent too far rightdard Runoff (DSR);The right margin crossed the left margin or the left margin=crossed the right margin, or an invalid indent was specified.%Check the margin and indent settings.&&>m(%51Yj'CEM, comma expected, missing: 'string'dard Runoff (DSR)4A required comma is missing from the command string.Supply the missing comma.''>o %+1DUFAB, file aborteddard Runoff (DSR)*DSR aborted the file for internal reasons.Contact HP Customer Support.((>o;%?11l}:MRS, missing one or more .RESTORE commands at end of filedard Runoff (DSR)4The file contains fewer .RESTORE commands than .SAVE commands.0Specify the correct number of .RESTORE commands.))>v(%{ 1Yj'PWF, page number will not fit on titledard Runoff (DSR)=The title (on the first header information line) extends intoy $%VI1Uf#CWF, can't write footnote file (N)dard Runoff (DSR)=DSR can open the footnote work file but cannot write to it; Nis a system error code.8Reprocess the file. If the problem continues, notify thesystem manager.++>y2%?-1ct1JEC, Unexpected text at end of command: 'string'dard Runoff (DSR)5Extraneous text (not a valid terminator) follows thiscommand.,Insert a valid terminator after the command.,,>y7%i%1hy6TAR, no text allowed after .REQUIRE command: 'string'dard Runoff (DSR)7An attempt was made to insert commands or text directly0following a .REQUIRE command file specification.$Put the commands on a separate line.-->a'%21Xis&QST, Quoted string too long: 'string'dard Runoff (DSR)1A quoted text value contains too many characters.8Reduce the number of characters. In some cases, only one6quoted character is allowed (for example, the .DISPLAY;ELEMENTS command). In other cases, up to 150 characters are+allowed (for example, the .REPEAT command)...>&Y%g618ECJL, can't output line correctly - margins too narrow. Line will not be justifieddard Runoff (DSR)=The text and spacing are greater than the number of character(positions available between the margins.5Truncate the line or use the break flag to divide it.//> "%S-1Sd!INI, improperly nested: 'string'dard Runoff (DSR)>The conditional DSR commands (.IF/.IFNOT and .ELSE/.ENDIF) areimproperly matched.,Correct the DSR commands so that they match.00>N%:!1?SSR, restricted character '^\' (octal 34) encountered in text, ignoreddard Runoff (DSR)9DSR encountered a restricted character in the input file. Remove the restricted character.11>%5!1L]TFE, too few end commandsdard Runoff (DSR)4An .END command (for example, .END LIST) is missing. Insert the missing .END command.22> %%G31Vg$INM, illegal number value: 'string'dard Runoff (DSR)>The parameter value is too large, too small, invalid, or not anumber.2Check to see that the value is formatted properly.33> 0%p+1ar /FAU, flag character 'character' already in usedard Runoff (DSR)>An attempt was made to define a character as a flag character;0however, the character has already been defined.*Use another character as a flag character.44> &%L1Wh%IBO, input buffer overflow: 'string'dard Runoff (DSR)>A character string that is too long was entered in an internal line buffer.Contact HP Customer Support.55> 2%>"1ct1IDD, invalid display descriptor: 'text in error'dard Runoff (DSR)=An incorrect descriptor is specified in a .DISPLAY directive.!Correct the specified descriptor.66>3^%1(E@URE, unrecoverable error processing record 'ln' on page 'pn' of input file 'file-name'dard Runoff (DSR)4An irrecoverable I/O error occurred, terminating the:processing at the specified edit line (ln) and page number(pn) of the input file.Contact HP Customer Support.77> (%1Yj''DVN, duplicate variable name: 'string'dard Runoff (DSR)6An attempt was made to use a name specification with a<.VARIABLE command that has already been used with a previous).VARIABLE, .IF, .IFNOT, or .ELSE command.Change the name specification.88> %9L1QbURR, unrecognized request: 'n'dard Runoff (DSR)8DSR detected an unrecognizable internal failure request.9Reprocess the file. If the error occurs again, contact HPCustomer Support.99> M%)/1~ .%-*1_p-FEL, 'flag-name' flag at end of line ignoreddard Runoff (DSR),This flag cannot occur at the end of a line.)Remove the flag from the end of the line.;;> N%)51BDX2, instead, specify RUNOFF/INTERMEDIATE and .REQUIRE 'file.RNX' heredard Runoff (DSR)(In-core indexing is no longer supported.4Specify RUNOFF/INTERMEDIATE and .REQUIRE 'file.RNX'.<<>5%_,1fw4STD, too many nested .NOTEs and/or .LISTs: 'string'dard Runoff (DSR)>An attempt was made to nest more than 20 notes or 20 lists (ormore than 7 within a footnote).+Reduce the number of nested notes or lists.==>h2%71ctCz1TMF, too many footnotes, excess footnotes mergeddard Runoff (DSR)=More than 20 footnotes are in a file. All footnotes after the=twentieth are merged into one large footnote and output after9the next page of text. (This large footnote will probablyexceed the page length.)6Use fewer footnotes, shorten them, or spread them out.>>> 0%CA1ar/EFD, .END FOOTNOTE doesn't terminate .FOOTNOTEdard Runoff (DSR)/%S'1`q.TMP, too many page ranges on /PAGES qualifierdard Runoff (DSR) +%?A1\m*ELD, .END LITERAL doesn't follow .LITERALdard Runoff (DSR)5The .END LITERAL command does not follow the .LITERALcommand.?%*=1p>TMS, too many saves, corresponding .SAVE and .RESTORE ignoreddard Runoff (DSR))More than 20 .SAVE directives are nested.%]1N_Pages written to 'file-name'dard Runoff (DSR)9This message indicates the number of pages written to the"specified output file (file name).None.CC>6%K#1gx5TMT, too many tab settings; excess ignored: 'string'dard Runoff (DSR);More than 40 separate settings were used with a single .TABSTOPS command."Reduce the number of tab settings.DD>%:%1J[TMV, too many /VARIANTsdard Runoff (DSR)9More than 20 variable names were used with the qualifier.$Reduce the number of variable names.EE>2%>11ct1NCS, no corresponding SAVE for attempted RESTOREdard Runoff (DSR)=The file contains more .RESTORE commands than .SAVE commands.0Specify the correct number of .RESTORE commands.FF> $%_1Uf#IFT, illegal in footnote: 'string'dard Runoff (DSR)9An attempt was made to use an illegal command between the$.FOOTNOTE and .ENDFOOTNOTE commands.Remove the command.GG>5%(1fw4CNF, character string expected, not found: 'string'dard Runoff (DSR)'A required character string is missing.Supply the missing string.HH> %LL1BSIIF, ^X ignoreddard Runoff (DSR)=A Ctrl/X (^X) was illegally entered in the input file and was not accepted. %;31QbILC, illegal command: 'string'dard Runoff (DSR):The command or values specified for it are unrecognizable.2Check for spelling errors in the command keywords.JJ>&%m1Wh%CNS, command not supported: 'number'dard Runoff (DSR)8The command is not supported by this version of DSR; the3number in the message is an internal Compaq number.Remove or replace the command.KK> $%T1Uf#ILE, internal logic error 'string'dard Runoff (DSR)=DSR detected an internal failure at the location specified bythe indicated string.Contact HP Customer Support.LL>0%_-1ar/RTL, input record too long: truncated 'string'dard Runoff (DSR)J0%l~1ar\/COB, can't open binary output file 'file-spec'dard Runoff (DSR)%(1CT|AAA, 'file-spec'dard Runoff (DSR)'This message should never be displayed.Contact HP Customer Support.OO>S0%S1are/COF, can't open footnote work file 'file-name'dard Runoff (DSR)[(%p1Yjm'COI, can't open input file 'file-name'dard Runoff (DSR)6The input file specification is erroneous, the file is8nonexistent, or you do not have read access to the file.;Check the file specification for errors, or check to see if;you have read access to the file. If the problem continues,notify the system manager.QQ>p6%~1gx5LDE, literal doesn't end with .END LITERAL: 'STRING'dard Runoff (DSR)=An .END LITERAL command does not immediately follow the final %F+1QbNIA, negative indent attempteddard Runoff (DSR)9An attempt was made to indent text beyond the left margin limit of 0.*Correct the indent or left margin setting.SS>W%+1@NIC, another 'n' negative indents detected and accumulated. Now being reported.dard Runoff (DSR).APPENDIX commands, or by the end-of-file. The count of errors>is cleared after each .CHAPTER and .APPENDIX command, or afterthe end-of-file.*Correct the indent or left margin setting.TT>%(1CT|PC1, 'file-spec'dard Runoff (DSR)'This message should never be displayed.Contact HP Customer Support.UU>6%+1gx5PC2, 'n' index record[s] written to '.BRN file-spec'dard Runoff (DSR)*This message results from the use of /LOG.None.VV>@%+1q?PC3, 'n' table-of-contents records written to '.BRN file-spec'dard Runoff (DSR)*This message results from the use of /LOG.None.WW>D%W<1uCNSF, .END LIST/.END NOTE not in same file as .LIST/.NOTE: 'string'dard Runoff (DSR):An illegal attempt was made to start a list or note in onefile and end it in another.;End the list or note in the same file where it was started.XX>&%>,1Wh%NTD, files nested too deep: 'string'dard Runoff (DSR)=An attempt was made to nest .REQUIRE files more than 10 deep.+Reduce the number of nested .REQUIRE files.YY>PT%1EbESee command on input line 'line-number' of page 'page-number' of file 'file-name'dard Runoff (DSR);This standard error message specifies the name of the input>file (file name) in which the command is located, and the file3page number and line number where the error occurs.Correct the invalid command.ZZ>8%1O`,JTTL, text too long: 'string'dard Runoff (DSR)>The text value for the command (for example, .TITLE, .CHAPTER,>or .NOTE) is too long for the specified margin setting or pageESCACP, Systems Commu;:kF1lC:VAL_NOT_PWR2, Qualifier value must be an exact power of 2nications Architecture Control Program4The size specified for /WINDOW=TRANSMIT_SIZE=size or5/WINDOW=RECEIVE_SIZE=size is not an exact power of 2.9Retry the command using a value for size that is an exact power of 2.\\>+:8>1\*AMBIGUOUS, Command or qualifier ambiguousnications Architecture Control Program7Too few letters of a command or qualifier were entered.=Type more characters to make the command or qualifier unique.]]>;:2K1l:CONT_DISALLOWED, Continuation data disallowed for requestnications Architecture Control Program1An internal system state error has been detected.8Try the command again. If the error persists, contact HPCustomer Support.^^>):u61Z+(CONT_LOST, Continuation point not foundnications Architecture Control Program:A continuation marker point has been overwritten. This can9happen when multiple SHOW commands arrive simultaneously.5This is a temporary condition. Try the command again.__>-:=G1^,CONT_NOT_VALID, Continuation data not validnications Architecture Control Program%:n61V| $CONT_STALE, Continuation data stalenications Architecture Control Program8More than 32 simultaneous requests for data that require4continuation records to complete have been received.5This is a temporary condition. Try the command again.aa>?:1K1p>CONT_WITH_HINT, Continuation data supplied with non-zero hintnications Architecture Control Program0An internal data format error has been detected.8Try the command again. If the error persists, contact HPCustomer Support.bb>':J(1X~&DEV_OFFLINE, Port 'number' is offlinenications Architecture Control Program=The PORT device specified in a SHOW PORT/SHOW CIRCUIT command is offline.'None. This is an Informational message.cc>,:2K1]+HDR_NOT_VALID, Management header not validnications Architecture Control Program1An internal system state error has been detected.8Try the command again. If the error persists, contact HPCustomer Support.dd>+:51\*INCOMPAT_HDR, Incompatible header versionnications Architecture Control Program4An internal version number consistency check failed.Contact HP Customer Support.ee>.:51_-INCOMPAT_PAR, Incompatible parameter versionnications Architecture Control Program4An internal version number consistency check failed.Contact HP Customer Support.ff>F:&1wEINVALID_NAME, Invalid name (VC, channel, device)(partial name given)nications Architecture Control Program%An internal consistency check failed.Contact HP Customer Support.gg>=:&(1n=a:b51OCINVALID_RSTATION, Specifying a remote station with no port name is not validnications Architecture Control Program:In a SET CIRCUIT command, you cannot specify the /RSTATION&qualifier without the /PORT qualifier.4Specify the /PORT and /RSTATION qualifiers together.ii>:Q#1NtINVCOMMAND, Invalid commandnications Architecture Control Program:This error may be output as a secondary error message withother command errors."Correct the command and try again.jj>/4:dR1eA3INVRSTA, Invalid remote station address: 'address'nications Architecture Control Program5An invalid remote station has been specified with the-/RSTATION qualifier in a SET CIRCUIT command.;Specify a valid remote station address, as displayed by theSHOW CIRCUIT command.kk>":y41Sy&!INVTOKEN, Invalid token: 'token'nications Architecture Control Program;An invalid type was entered for a qualifier. For example, a6:"(1g5NAME_NOT_FOUND, Name (VC, channel, device) not foundnications Architecture Control Program!The specified item was not found.'Check the name and reenter the command.mm> :Cf1OuNOCHANFND, No channels foundnications Architecture Control Program;The node name specified in a SHOW CHANNEL command cannot befound.D:>W1u0CNOCHANGIVEN, No channels specified (default wildcard only on SHOW)nications Architecture Control Program=No target node names were specified in a SET CHANNEL command,:Specify one or more target node names or enter an asterisk(*) to indicate all nodes.oo>D:>W1u0CNOCIRCGIVEN, No CIRCUITs specified (default wildcard only on SHOW)nications Architecture Control Program=No target node names were specified in a SET CIRCUIT command.:Specify one or more target node names or enter an asterisk(*) to indicate all nodes.pp>:,1KqNODATAFND, No data foundnications Architecture Control Program+An internal TRACE consistency check failed.Contact HP Customer Support.qq>:Ad1MsNODEVFND, No devices foundnications Architecture Control Program7An illegal LAN adapter name was specified in a SHOW LANcommand.7Specify one or more valid LAN adapter names or enter an+asterisk (*) to indicate all LAN adapters.rr>B:6E1sANODEVGIVEN, No devices specified (default wildcard only on SHOW)nications Architecture Control Program5No LAN adapters were specified in a STOP LAN command.;Specify one or more valid LAN adapter names and reenter thecommand.ss><:^>1m/;NOMULTIVALS, Multiple arguments not permitted in qualifiernications Architecture Control Program;A list of values was specified as arguments for a qualifier!that accepts only a single value.=Reenter the command with a single argument for the qualifier.tt>A:4D1r@NOPORTGIVEN, No PORTs specified (default wildcard only on SHOW)nications Architecture Control Program3No PORT device was specified in a SET PORT command.?\:SK1QBNOPRIV, Insufficient privileges: (SET,STOP,START & TRACE commands require SYSPRV)nications Architecture Control Program>The process does not have sufficient privileges to execute theindicated commands.=Ask the system administrator to grant the SYSPRV privilege to the process.vv>4:`1e<3NOSUCHDEV, No such device available: 'device-name'nications Architecture Control Program:GE1HnNOVCFND, No VCs foundnications Architecture Control Program;The node name specified in a SHOW VC command is not a valid node name.=Specify a valid node name or an asterisk (*) to indicate allnodes.xx>=:D?1nSpecify a valid node name as the target of the SET VC command.yy>3:D:1d2NO_SUCH_PORT, No such port available: 'port-name'nications Architecture Control Program:An invalid port name was specified in the SET DEFAULT PORTcommand.9None. The SET DEFAULT PORT command is not used currently.zz>/:&1`.OBJ_HANDLE_INV, Managed object handle invalidnications Architecture Control Program%An internal consistency check failed.Contact HP Customer Support.{{>*:U@1[)OPENFILE, Error opening file: 'filename'nications Architecture Control Program=An error occurred while creating the output file specified bythe /OUTPUT qualifier.4Verify that the file syntax is correct and retry the operation.||>*:n51[$)OUT_OF_RANGE, Value out of range 'value'nications Architecture Control Program;An integer value specified as an argument to a qualifier is1outside the limits for that particular qualifier.4Specify a value within the limits for the qualifier.}}>=-:F1^O,QIO_FAILURE, QIO to port 'port-name' failednications Architecture Control Program=A QIO to set or get information from a particular port driverfailed.7This error could indicate a temporary device condition.:Try the command again. If the failure persists, contact HPCustomer Support.} }:SCACP, Systems Commu:118ERSP_BUF_REV_UNSUPP, Response from port 'port-name' has a higher rev.) than SCACP supports," You may need a newer SCACP imagenications Architecture Control Program0An internal revision number sanity check failed.Contact HP Customer Support.}*):Ug1Z<(RSP_NO_ROOM, No room in response buffernications Architecture Control Program6A SHOW command cannot return data because the suppliedresponse buffer is too small.7Exit SCACP, rerun it, and try the command again. If the.problem persists, contact HP Customer Support.}:[1OuTOOLONG, Input line too longnications Architecture Control ProgramThe command line is too long.Break the command into multiple commands, each with fewer than 32 targets.}:1IoUNKNOWN, Unknown errornications Architecture Control ProgramAn unknown error was detected.Contact HP Customer Support.}-:N@1^,VAL_NOTALLOWED, Qualifier value not allowednications Architecture Control Program=A qualifier value was specified for a qualifier that does notaccept a value.4Enter the command without specifying a value for the qualifier.}(:>;1Y'VAL_REQUIRED, Qualifier value requirednications Architecture Control Program=No value was specified for a qualifier that requires a value.:Reenter the command and specify a value for the qualifier.WK.>Note that the created process will not be awakened, so it mustbe deleted and re-created. >OFF, DIGITAL Stan!%_1Rc UDS, undefined symbol: 'string'dard Runoff (DSR) 1%C1bsk0FNA, flag not allowed in this context: 'string'dard Runoff (DSR);(1) A flag is used that requires that text directly precede1*%mj1[lC)MEI, missing at least one .ENDIF commanddard Runoff (DSR)^%V1F?WFR, .RESTORE not in same file as .SAVE/.SAVEALL: 'additional- locational-information'dard Runoff (DSR);A .RESTORE directive cannot be issued for a .SAVE directive>from within a require file if that .SAVE directive occurs in a*higher level file or another require file. )%/.1Zk(BMS, bad margin specification: 'string'dard Runoff (DSR).An illegal value is used for a margin setting.-Correct the margin setting in the input file.> &%k)1Wh%UME, unmatched end command: 'string'dard Runoff (DSR)=An .END command (for example, .END NOTE) is detected, but the,associated beginning command (.NOTE) is not.(Insert the associated beginning command.>  N%K@1BDIGITAL Standard Runoff Version V3.0: 'number' diagnostic messages reporteddard Runoff (DSR)9This standard error message specifies the number of errormessages output.6Refer to the specific error messages accompanying thismessage.> 9%C1j{8DIGITAL Standard Runoff Version V3.0: No errors detecteddard Runoff (DSR)=This message indicates the successful processing of a file byDSR.None.>,%H1]n+MFN, number illegal or malformed: 'string'dard Runoff (DSR)6A plus sign (+) or a minus sign (-) is used without anumerical value.Insert the numerical value.>:%OB1k| 9MFS, missing or improperly delimited file spec: 'string'dard Runoff (DSR):The file specification for the DSR command .REQUIRE is notdelimited properly.:Enclose the file specification in apostrophes or quotationmarks.>L%1}COn output page 'pn'; on input line 'ln' of page 'pn' of file 'file- name'dard Runoff (DSR)the page (pn) in the output file affected by the error and the." #% 1Te @"EVL, too many variables: 'string'dard Runoff (DSR)6The maximum of 20 variables has been exceeded with the;inclusion of the specified .VARIABLE or conditional command>(.IF, .IFNOT, .ENDIF, or .ELSE); the command in error has beenignored.Reduce the number of variables.>F) )%Y1ZkX(COO, can't open output file 'file-name'dard Runoff (DSR)>The output file specification is erroneous, or you do not havewrite access to the file.;Check the file specification for errors, or check to see ifd2 +%v1\mv*COR, can't open required file 'file-name'dard Runoff (DSR)3 "%[,1Sd!FWF, footnotes won't fit on pagedard Runoff (DSR)5*%C1[l)ITC, index entry too complicated or longdard Runoff (DSR)6-%Y+1^o,ITD, .IF commands nested too deep: 'string'dard Runoff (DSR)7The number of nested conditional commands (.IF, .IFNOT) exceeds the maximum limit of 10.*Reduce the number of conditional commands.>71%kN1bs,0BVN, missing or illegal variable name: 'string'dard Runoff (DSR)9The name specification for a DSR command (.VARIABLE, .IF,0.IFNOT, .ENDIF, or .ELSE) is missing or illegal.7)%51Zk(MNL, missing number or letter: 'string'dard Runoff (DSR)4A required numerical value or text value is missing.Insert the missing value.>9%%\1Vg$LTC, line too complicated: 'string'dard Runoff (DSR)>There is excessive use of boldface, underlining, overstriking,and hyphenation on the line.Simplify the line.>? (%P>1Yj'DNS, .NO SPACE illegal in this contextdard Runoff (DSR)>A .NO SPACE command has been inserted following a command thatissues a .BREAK.=Remove the .NO SPACE command, or put it in the correct place.>F<%N:1m~;SKC, .ENDIF/.ELSE not in same file as .IF/.IFNOT: 'string'dard Runoff (DSR)=An attempt was made to use associated conditional commands inseparate files.9Put the associated conditional commands in the same file.>IP ;%^1l}[:GFC, given footnote count incorrect, correct value is 'n'dard Runoff (DSR)8The actual number of lines generated for the footnote is;greater or less than the count specified with the .FOOTNOTE n command.:None. If you do not want the message to appear, remove the"number from the .FOOTNOTE command. >Lg &%j1Wh^%CRF, can't read back saved footnotesdard Runoff (DSR)=DSR has successfully written footnote information to the work>file but cannot read it back. One or more 001RNO.TMP files mayalready exist.;Delete any 001RNO.TMP files, and reprocess the file. If the-problem continues, notify the system manager.!!>i!%< 1Rc IVS, illegal /VARIANT qualifierdard Runoff (DSR);The name specification for conditional commands is invalid.Correct the name specification."">j?%Z11p >MQS, missing or improperly delimited quoted strings: 'string'dard Runoff (DSR)=A beginning or ending apostrophe or quotation mark is missingfrom the quoted text value.0Insert the missing apostrophe or quotation mark.##>k /%3&1`q.CRP, can't recognize page on /PAGES qualifierdard Runoff (DSR)2A page range specification is illegally formatted.%Correct the page range specification.$$>kq%&1=MRC, another 'n' crossed margin or bad right indent attempts2 detected and accumulated. Now being reporteddard Runoff (DSR)5Horizontal spacing errors were detected and are being=reported. These errors are triggered by .CHAPTER or .APPENDIX>commands or by the end-of-file. The count of errors is cleared>after each .CHAPTER and .APPENDIX command or after the end-of-file.%Check the margin and indent settings.%%> l9%z&1j{8MRG, margins crossed, or attempted indent too far rightdard Runoff (DSR);The right margin crossed the left margin or the left margin=crossed the right margin, or an invalid indent was specified.%Check the margin and indent settings.&&>m(%51Yj'CEM, comma expected, missing: 'string'dard Runoff (DSR)4A required comma is missing from the command string.Supply the missing comma.''>o %+1DUFAB, file aborteddard Runoff (DSR)*DSR aborted the file for internal reasons.Contact HP Customer Support.((>o;%?11l}:MRS, missing one or more .RESTORE commands at end of filedard Runoff (DSR)4The file contains fewer .RESTORE commands than .SAVE commands.0Specify the correct number of .RESTORE commands.))>v(%{ 1Yj'PWF, page number will not fit on titledard Runoff (DSR)=The title (on the first header information line) extends intoy $%VI1Uf#CWF, can't write footnote file (N)dard Runoff (DSR)=DSR can open the footnote work file but cannot write to it; Nis a system error code.8Reprocess the file. If the problem continues, notify thesystem manager.++>y2%?-1ct1JEC, Unexpected text at end of command: 'string'dard Runoff (DSR)5Extraneous text (not a valid terminator) follows thiscommand.,Insert a valid terminator after the command.,,>y7%i%1hy6TAR, no text allowed after .REQUIRE command: 'string'dard Runoff (DSR)7An attempt was made to insert commands or text directly0following a .REQUIRE command file specification.$Put the commands on a separate line.-->a'%21Xis&QST, Quoted string too long: 'string'dard Runoff (DSR)1A quoted text value contains too many characters.8Reduce the number of characters. In some cases, only one6quoted character is allowed (for example, the .DISPLAY;ELEMENTS command). In other cases, up to 150 characters are+allowed (for example, the .REPEAT command)...>&Y%g618ECJL, can't output line correctly - margins too narrow. Line will not be justifieddard Runoff (DSR)=The text and spacing are greater than the number of character(positions available between the margins.5Truncate the line or use the break flag to divide it.//> "%S-1Sd!INI, improperly nested: 'string'dard Runoff (DSR)>The conditional DSR commands (.IF/.IFNOT and .ELSE/.ENDIF) areimproperly matched.,Correct the DSR commands so that they match.00>N%:!1?SSR, restricted character '^\' (octal 34) encountered in text, ignoreddard Runoff (DSR)9DSR encountered a restricted character in the input file. Remove the restricted character.11>%5!1L]TFE, too few end commandsdard Runoff (DSR)4An .END command (for example, .END LIST) is missing. Insert the missing .END command.22> %%G31Vg$INM, illegal number value: 'string'dard Runoff (DSR)>The parameter value is too large, too small, invalid, or not anumber.2Check to see that the value is formatted properly.33> 0%p+1ar /FAU, flag character 'character' already in usedard Runoff (DSR)>An attempt was made to define a character as a flag character;0however, the character has already been defined.*Use another character as a flag character.44> &%L1Wh%IBO, input buffer overflow: 'string'dard Runoff (DSR)>A character string that is too long was entered in an internal line buffer.Contact HP Customer Support.55> 2%>"1ct1IDD, invalid display descriptor: 'text in error'dard Runoff (DSR)=An incorrect descriptor is specified in a .DISPLAY directive.!Correct the specified descriptor.66>3^%1(E@URE, unrecoverable error processing record 'ln' on page 'pn' of input file 'file-name'dard Runoff (DSR)4An irrecoverable I/O error occurred, terminating the:processing at the specified edit line (ln) and page number(pn) of the input file.Contact HP Customer Support.77> (%1Yj''DVN, duplicate variable name: 'string'dard Runoff (DSR)6An attempt was made to use a name specification with a<.VARIABLE command that has already been used with a previous).VARIABLE, .IF, .IFNOT, or .ELSE command.Change the name specification.88> %9L1QbURR, unrecognized request: 'n'dard Runoff (DSR)8DSR detected an unrecognizable internal failure request.9Reprocess the file. If the error occurs again, contact HPCustomer Support.99> M%)/1~ .%-*1_p-FEL, 'flag-name' flag at end of line ignoreddard Runoff (DSR),This flag cannot occur at the end of a line.)Remove the flag from the end of the line.;;> N%)51BDX2, instead, specify RUNOFF/INTERMEDIATE and .REQUIRE 'file.RNX' heredard Runoff (DSR)(In-core indexing is no longer supported.4Specify RUNOFF/INTERMEDIATE and .REQUIRE 'file.RNX'.<<>5%_,1fw4STD, too many nested .NOTEs and/or .LISTs: 'string'dard Runoff (DSR)>An attempt was made to nest more than 20 notes or 20 lists (ormore than 7 within a footnote).+Reduce the number of nested notes or lists.==>h2%71ctCz1TMF, too many footnotes, excess footnotes mergeddard Runoff (DSR)=More than 20 footnotes are in a file. All footnotes after the=twentieth are merged into one large footnote and output after9the next page of text. (This large footnote will probablyexceed the page length.)6Use fewer footnotes, shorten them, or spread them out.>>> 0%CA1ar/EFD, .END FOOTNOTE doesn't terminate .FOOTNOTEdard Runoff (DSR)/%S'1`q.TMP, too many page ranges on /PAGES qualifierdard Runoff (DSR) +%?A1\m*ELD, .END LITERAL doesn't follow .LITERALdard Runoff (DSR)5The .END LITERAL command does not follow the .LITERALcommand.?%*=1p>TMS, too many saves, corresponding .SAVE and .RESTORE ignoreddard Runoff (DSR))More than 20 .SAVE directives are nested.%]1N_Pages written to 'file-name'dard Runoff (DSR)9This message indicates the number of pages written to the"specified output file (file name).None.CC>6%K#1gx5TMT, too many tab settings; excess ignored: 'string'dard Runoff (DSR);More than 40 separate settings were used with a single .TABSTOPS command."Reduce the number of tab settings.DD>%:%1J[TMV, too many /VARIANTsdard Runoff (DSR)9More than 20 variable names were used with the qualifier.$Reduce the number of variable names.EE>2%>11ct1NCS, no corresponding SAVE for attempted RESTOREdard Runoff (DSR)=The file contains more .RESTORE commands than .SAVE commands.0Specify the correct number of .RESTORE commands.FF> $%_1Uf#IFT, illegal in footnote: 'string'dard Runoff (DSR)9An attempt was made to use an illegal command between the$.FOOTNOTE and .ENDFOOTNOTE commands.Remove the command.GG>5%(1fw4CNF, character string expected, not found: 'string'dard Runoff (DSR)'A required character string is missing.Supply the missing string.HH> %LL1BSIIF, ^X ignoreddard Runoff (DSR)=A Ctrl/X (^X) was illegally entered in the input file and was not accepted. %;31QbILC, illegal command: 'string'dard Runoff (DSR):The command or values specified for it are unrecognizable.2Check for spelling errors in the command keywords.JJ>&%m1Wh%CNS, command not supported: 'number'dard Runoff (DSR)8The command is not supported by this version of DSR; the3number in the message is an internal Compaq number.Remove or replace the command.KK> $%T1Uf#ILE, internal logic error 'string'dard Runoff (DSR)=DSR detected an internal failure at the location specified bythe indicated string.Contact HP Customer Support.LL>0%_-1ar/RTL, input record too long: truncated 'string'dard Runoff (DSR)J0%l~1ar\/COB, can't open binary output file 'file-spec'dard Runoff (DSR)%(1CT|AAA, 'file-spec'dard Runoff (DSR)'This message should never be displayed.Contact HP Customer Support.OO>S0%S1are/COF, can't open footnote work file 'file-name'dard Runoff (DSR)[(%p1Yjm'COI, can't open input file 'file-name'dard Runoff (DSR)6The input file specification is erroneous, the file is8nonexistent, or you do not have read access to the file.;Check the file specification for errors, or check to see if;you have read access to the file. If the problem continues,notify the system manager.QQ>p6%~1gx5LDE, literal doesn't end with .END LITERAL: 'STRING'dard Runoff (DSR)=An .END LITERAL command does not immediately follow the final %F+1QbNIA, negative indent attempteddard Runoff (DSR)9An attempt was made to indent text beyond the left margin limit of 0.*Correct the indent or left margin setting.SS>W%+1@NIC, another 'n' negative indents detected and accumulated. Now being reported.dard Runoff (DSR).APPENDIX commands, or by the end-of-file. The count of errors>is cleared after each .CHAPTER and .APPENDIX command, or afterthe end-of-file.*Correct the indent or left margin setting.TT>%(1CT|PC1, 'file-spec'dard Runoff (DSR)'This message should never be displayed.Contact HP Customer Support.UU>6%+1gx5PC2, 'n' index record[s] written to '.BRN file-spec'dard Runoff (DSR)*This message results from the use of /LOG.None.VV>@%+1q?PC3, 'n' table-of-contents records written to '.BRN file-spec'dard Runoff (DSR)*This message results from the use of /LOG.None.WW>D%W<1uCNSF, .END LIST/.END NOTE not in same file as .LIST/.NOTE: 'string'dard Runoff (DSR):An illegal attempt was made to start a list or note in onefile and end it in another.;End the list or note in the same file where it was started.XX>&%>,1Wh%NTD, files nested too deep: 'string'dard Runoff (DSR)=An attempt was made to nest .REQUIRE files more than 10 deep.+Reduce the number of nested .REQUIRE files.YY>PT%1EbESee command on input line 'line-number' of page 'page-number' of file 'file-name'dard Runoff (DSR);This standard error message specifies the name of the input>file (file name) in which the command is located, and the file3page number and line number where the error occurs.Correct the invalid command.ZZ>8%1O`,JTTL, text too long: 'string'dard Runoff (DSR)>The text value for the command (for example, .TITLE, .CHAPTER,>or .NOTE) is too long for the specified margin setting or pageESCACP, Systems Commu;:kF1lC:VAL_NOT_PWR2, Qualifier value must be an exact power of 2nications Architecture Control Program4The size specified for /WINDOW=TRANSMIT_SIZE=size or5/WINDOW=RECEIVE_SIZE=size is not an exact power of 2.9Retry the command using a value for size that is an exact power of 2.\\>+:8>1\*AMBIGUOUS, Command or qualifier ambiguousnications Architecture Control Program7Too few letters of a command or qualifier were entered.=Type more characters to make the command or qualifier unique.]]>;:2K1l:CONT_DISALLOWED, Continuation data disallowed for requestnications Architecture Control Program1An internal system state error has been detected.8Try the command again. If the error persists, contact HPCustomer Support.^^>):u61Z+(CONT_LOST, Continuation point not foundnications Architecture Control Program:A continuation marker point has been overwritten. This can9happen when multiple SHOW commands arrive simultaneously.5This is a temporary condition. Try the command again.__>-:=G1^,CONT_NOT_VALID, Continuation data not validnications Architecture Control Program%:n61V| $CONT_STALE, Continuation data stalenications Architecture Control Program8More than 32 simultaneous requests for data that require4continuation records to complete have been received.5This is a temporary condition. Try the command again.aa>?:1K1p>CONT_WITH_HINT, Continuation data supplied with non-zero hintnications Architecture Control Program0An internal data format error has been detected.8Try the command again. If the error persists, contact HPCustomer Support.bb>':J(1X~&DEV_OFFLINE, Port 'number' is offlinenications Architecture Control Program=The PORT device specified in a SHOW PORT/SHOW CIRCUIT command is offline.'None. This is an Informational message.cc>,:2K1]+HDR_NOT_VALID, Management header not validnications Architecture Control Program1An internal system state error has been detected.8Try the command again. If the error persists, contact HPCustomer Support.dd>+:51\*INCOMPAT_HDR, Incompatible header versionnications Architecture Control Program4An internal version number consistency check failed.Contact HP Customer Support.ee>.:51_-INCOMPAT_PAR, Incompatible parameter versionnications Architecture Control Program4An internal version number consistency check failed.Contact HP Customer Support.ff>F:&1wEINVALID_NAME, Invalid name (VC, channel, device)(partial name given)nications Architecture Control Program%An internal consistency check failed.Contact HP Customer Support.gg>=:&(1n=a:b51OCINVALID_RSTATION, Specifying a remote station with no port name is not validnications Architecture Control Program:In a SET CIRCUIT command, you cannot specify the /RSTATION&qualifier without the /PORT qualifier.4Specify the /PORT and /RSTATION qualifiers together.ii>:Q#1NtINVCOMMAND, Invalid commandnications Architecture Control Program:This error may be output as a secondary error message withother command errors."Correct the command and try again.jj>/4:dR1eA3INVRSTA, Invalid remote station address: 'address'nications Architecture Control Program5An invalid remote station has been specified with the-/RSTATION qualifier in a SET CIRCUIT command.;Specify a valid remote station address, as displayed by theSHOW CIRCUIT command.kk>":y41Sy&!INVTOKEN, Invalid token: 'token'nications Architecture Control Program;An invalid type was entered for a qualifier. For example, a6:"(1g5NAME_NOT_FOUND, Name (VC, channel, device) not foundnications Architecture Control Program!The specified item was not found.'Check the name and reenter the command.mm> :Cf1OuNOCHANFND, No channels foundnications Architecture Control Program;The node name specified in a SHOW CHANNEL command cannot befound.D:>W1u0CNOCHANGIVEN, No channels specified (default wildcard only on SHOW)nications Architecture Control Program=No target node names were specified in a SET CHANNEL command,:Specify one or more target node names or enter an asterisk(*) to indicate all nodes.oo>D:>W1u0CNOCIRCGIVEN, No CIRCUITs specified (default wildcard only on SHOW)nications Architecture Control Program=No target node names were specified in a SET CIRCUIT command.:Specify one or more target node names or enter an asterisk(*) to indicate all nodes.pp>:,1KqNODATAFND, No data foundnications Architecture Control Program+An internal TRACE consistency check failed.Contact HP Customer Support.qq>:Ad1MsNODEVFND, No devices foundnications Architecture Control Program7An illegal LAN adapter name was specified in a SHOW LANcommand.7Specify one or more valid LAN adapter names or enter an+asterisk (*) to indicate all LAN adapters.rr>B:6E1sANODEVGIVEN, No devices specified (default wildcard only on SHOW)nications Architecture Control Program5No LAN adapters were specified in a STOP LAN command.;Specify one or more valid LAN adapter names and reenter thecommand.ss><:^>1m/;NOMULTIVALS, Multiple arguments not permitted in qualifiernications Architecture Control Program;A list of values was specified as arguments for a qualifier!that accepts only a single value.=Reenter the command with a single argument for the qualifier.tt>A:4D1r@NOPORTGIVEN, No PORTs specified (default wildcard only on SHOW)nications Architecture Control Program3No PORT device was specified in a SET PORT command.?\:SK1QBNOPRIV, Insufficient privileges: (SET,STOP,START & TRACE commands require SYSPRV)nications Architecture Control Program>The process does not have sufficient privileges to execute theindicated commands.=Ask the system administrator to grant the SYSPRV privilege to the process.vv>4:`1e<3NOSUCHDEV, No such device available: 'device-name'nications Architecture Control Program:GE1HnNOVCFND, No VCs foundnications Architecture Control Program;The node name specified in a SHOW VC command is not a valid node name.=Specify a valid node name or an asterisk (*) to indicate allnodes.xx>=:D?1nSpecify a valid node name as the target of the SET VC command.yy>3:D:1d2NO_SUCH_PORT, No such port available: 'port-name'nications Architecture Control Program:An invalid port name was specified in the SET DEFAULT PORTcommand.9None. The SET DEFAULT PORT command is not used currently.zz>/:&1`.OBJ_HANDLE_INV, Managed object handle invalidnications Architecture Control Program%An internal consistency check failed.Contact HP Customer Support.{{>*:U@1[)OPENFILE, Error opening file: 'filename'nications Architecture Control Program=An error occurred while creating the output file specified bythe /OUTPUT qualifier.4Verify that the file syntax is correct and retry the operation.||>*:n51[$)OUT_OF_RANGE, Value out of range 'value'nications Architecture Control Program;An integer value specified as an argument to a qualifier is1outside the limits for that particular qualifier.4Specify a value within the limits for the qualifier.}}>=-:F1^O,QIO_FAILURE, QIO to port 'port-name' failednications Architecture Control Program=A QIO to set or get information from a particular port driverfailed.7This error could indicate a temporary device condition.:Try the command again. If the failure persists, contact HPCustomer Support.}eSDA, System Dump Ana?1pu>NOSUCHPOOL, no 'pool-type' pool found; look in non-paged poollyzer>No pool of the specified type has been allocated. All requests7for the specified type of pool have been satisfied fromnonpaged pool.None.U81?INVSTACK, invalid/inaccessible 'stack-pointer' stack pointer = 'address'lyzer7The SHOW STACK command cannot access the stack pointer.None.V1 ANOTALPHADUMP, dump file does not contain an OpenVMS Alpha system dumplyzer9The dump file you are trying to analyze using the OpenVMS>Alpha System Dump Analyzer was not written on an OpenVMS Alphasystem.9Confirm that the dump file you wish to analyze is from an>OpenVMS Alpha system, and that a system dump has actually beenwritten to the file.W*~1[`i)NOTANLMB, block 'n' is not an LMB headerlyzer>A SHOW DUMP/LMB=n command was issued where the block specified6by "n" in the dump is not a logical memory block (LMB)header.;Review the contents of the dump and the specified SHOW DUMP9command; then reissue the command, specifying a valid LMBheader block number.Eh1v{DBLKSNRLSD, no dump blocks in page file to release, or not page filelyzer;The file specified in the ANALYZE/RELEASE command either is+not a page file or does not contain a dump.None.x11NSNOSYSIPC, no IPC structureslyzer0Currently there is no IPC activity on this node.None.Xs1BINVALID_HWRPB, VBN for HWRPB in header is invalid; searching dump filelyzer7SDA could not find the hardware restart parameter block:(HWRPB) in the dump header and is searching the dump file.None.%91V[$NOSYSTPS, no transaction structureslyzer8Currently there are no active transactions on this node.None. 0 C1ty<BBMEMERRS, errors occurred writing memory contents to the dump filelyzer5The first block of the dump file contains information7indicating that there were errors while writing out thecommand. If the address is correct and the error still occurs,9the code that allocated the pool memory might have set up;the fields incorrectly. If this code is supplied by Compaq,contact HP Customer Support. $ 61gl065MEMNOTSVD, process memory not saved in the dump filelyzer9An attempt was made to examine the contents of a physical:memory location that was not saved when the subsetted dumpREGNOTVLD, register reference invalid - use indirection (@Rn)lyzer;The register reference in the EXAMINE command is not valid.:Use @Rn to include the contents of a specified register as>part of the EXAMINE expression. For OpenVMS VAX systems, valid=register numbers range from R0 through R15. For OpenVMS Alpha0systems, valid values range from R0 through R31.*1[`4)BADGSD, unknown type of GSD entry: 'GSD'lyzer8SDA encountered a type of global symbol that it does notUNALIGNED, unaligned address 'address'; converting to aligned addresslyzer"An unaligned address was detected.:None. OpenVMS SDA automatically converts the address to analigned address.vi1BPROCNOTDUMPED, process 'process-name' not dumped; process private% memory not accessiblelyzerIf processes you need to analyze are sometimes not included or>are incompletely included in system dumps, consider increasing=the size of the system dump file and/or use the SYS$SET_DUMP_>PRIORITY utility to force the process to be written earlier in the dump.{*1CPROCPARTDUMPED, process 'process-name' not completely dumped; some6 process private memory not accessiblelyzerIf processes you need to analyze are sometimes not included or>are incompletely included in system dumps, consider increasing=the size of the system dump file and/or use the SYS$SET_DUMP_>PRIORITY utility to force the process to be written earlier in the dump. a]1EFORMATDS, formatting 'data-structure-type' data structure, facility: 'facility-name'lyzer7This informational message describes the data structure$formatted by the SDA command FORMAT.None. 2`=1ch1FPNOTFOUND, could not read FP from process statelyzer:SDA cannot execute the SHOW CALL command because it cannot$read the current frame pointer (FP).To complete the dump, you need additional blocks, as specifiedby 'number' in the message.3Refer to the HP OpenVMS System Manager's Manual forOn OpenVMS VAX systems, this message indicates that the system9dump file is not large enough to accommodate all physical7memory. The number of physical pages SDA can analyze isrepresented by 'm'.You specified /COMPRESS, but data in this dump file is already-compressed. SDA is performing a regular copy.None.4`q1 ;ALRDYDCMP, data in this dump file is already decompressed;# performing regular copylyzer8You specified /DECOMPRESS, but data in this dump file is7already decompressed. SDA is performing a regular copy.None.*4 D<1uz<CIMAGENF, 'file-name' not found; check current process or EXEC listlyzer;The image file specified in a READ command cannot be found.7Check the READ command to ensure that the image name is;entered correctly, and check the image lists to ensure thatthe image exists.;1A1bg0DEFLATE, copying dump data in compressed formatlyzer8As requested, SDA is copying the dump data in compressedformat.None. "> 5\m1fk44CPUIDLE, no process currently scheduled on this CPUlyzerAn invalid CPU ID was specified for the SDA command SET CPU or>SHOW CPU. The CPU ID is invalid either because there is no CPU;in the system with the specified CPU ID, or because the CPU=with the specified CPU ID was never booted and was not active"at the time of the system failure.(Reenter the command with a valid CPU ID.##F3C1di2INFLATE, copying dump data in decompressed formatlyzer:As requested, SDA is copying the dump data in decompressedformat.None.$$H-_&1^c,INVREGID, no region matches the supplied IDlyzerThe process specified in a SHOW PROCESS or SET PROCESS command8is inaccessible either because it was swapped out of the7balance set or suspended (when using the ANALYZE/SYSTEM:command) or it was swapped out of the balance set when the5system failed (when using the ANALYZE/CRASH command).None.))R E1v{DINCDUMPFORM, dump file format incompatible with this version of SDAlyzer:An attempt was made to analyze a dump file taken under one9version of the OpenVMS operating system with an SDA image:built against another version. The format of the dump file9changed between the two versions of the OpenVMS operating#system, making analysis impossible.9Analyze the dump file with an SDA image built against the=version of the OpenVMS operating system that was running whenthe dump file was taken.**WSD1uzciCNOCBMAP, compression block map unreadable for compressed dump datalyzer:The header of the dump file specified in the ANALYZE/CRASH8command indicates that the dump file contains compressed:data, but SDA was unable to locate a compression block map9for decoding the data. Therefore, the dump is unreadable.None.++V=1nsparameter SAVEDUMP to 1. To make this change permanent, modifyEXPTOOLRG, expression too large for specified command optionslyzer>The value specified for a /BYTE or /WORD qualifier in a SEARCH(command is larger than a byte or a word.7Either change the value to a size that is valid for the4specified qualifier, or use a different qualifier to"accommodate the size of the value.11d.)v1_d-NOPRLOCK, no locks taken out by this processlyzer(No locks were taken out by this process.7Make sure the correct process is set as the current SDA=process. See SDA online help for Process_Context for details.22e.U^1_d-OPENOUT, error opening 'file-name' as outputlyzer>An error occurred when SDA attempted to create the output filefor a COPY operation.was not written completely. This can be caused by a small dump#file or errors during the bugcheck.;Check the console messages during the bugcheck. If the dump1ot%=HDRERRS, errors occurred writing the dump file header blockslyzer5The first block of the dump file contains informationThe process of writing out the dump file was aborted. The dump=file is not complete, and it is not useful for dump analysis.None.;;KpVK1]@COPYFAIL, unable to copy the data in this dump file: error code #'number'lyzer>w5<1fk4NOQUEUE, no queue has been specified for validationlyzer;The VALIDATE QUEUE command specified 0 or no queue address.Specify a valid queue address.??$x5<1fk64SPTNOTFND, system page table not found in dump filelyzer=The operating system was unable to copy the system page table9to SYSDUMP.DMP when it failed. As a result, SDA could notexamine the dump file.;None. The system page table is vital to SDA initialization.@@y21ch1SPWNFAIL, failed to spawn a process as specifiedlyzer;Either a process quota was exceeded, or SDA failed to spawn=a process that satisfies the criteria specified in an /INPUT,/OUTPUT, or /PROCESS qualifier.7Check the qualifier values to make sure they are valid.=Check whether the process quotas have been exceeded. For moreA system dump was written to PAGEFILE.SYS because there was nothe dump from the pagefile. When the dump has been copied from;the pagefile, SDA releases the pagefile space that was used=to hold the dump. Because further attempts to access the dump;would produce unpredictable results, SDA immediately exits.location may be an implied reference to memory made during theexecution of an SDA command.None.DD(fIU1:CTBL2SMALL, cannot completely format data structure; only 'integer'! symbols are displayedlyzer=The FORMAT command did not allocate enough space for the data structure.Check the ANALYZE/RELEASE command to ensure that the file namehas been specified correctly.GGs1KPBADPROC, no such processlyzer=The process name specified in the DCL command SHOW PROCESS or4SET PROCESS refers to a process that does not exist.Specify the correct process.HH^J1UANOFILENAME, an image in the EXEC list does not have a valid file name; not readlyzer9SDA found an image with no file name while processing the6READ/EXECUTIVE command. This condition occurs when the;directory and file specification exceed the system loader's39-character limit.:Reload the system image using a shorter directory and filespecification.IIDCU1uzCNOTPSHARE, shareable image for TP Services SDA support unavailablelyzerV1ot=NOREQ, symbol 'symbol-name' not found in system symbol tablelyzer=SDA cannot find a symbol in the SYS.STB file that is requiredfor SDA initialization.None.LL:V.1kp9NOREQSYM, symbol 'name' not found in system symbol tablelyzer=SDA cannot find a symbol in the SYS.STB file that is requiredfor SDA initialization.-Check the integrity of the symbol table file.MM';01X]&OUTOFRANG, lock id out of valid rangelyzer:The specified lock ID is greater than the maximum lock ID./Use the SHOW LOCK command to display all locks.NN/(1`e.NORESOURC, no resources locked in this systemlyzer'No resources are locked in this system.None.OO?LA1pu>STACKNTFND, stack range not found; dumping up to invalid pagelyzer7The range of memory locations specified in a SHOW STACKcommand is invalid.9Reissue the SHOW STACK command, specifying a valid memoryrange.PP#p91TY"INVLDADR, invalid virtual addresslyzer>The virtual address lies outside the boundaries of the virtual0addresses mapped by the system page table (SPT).8Reenter the command, specifying a valid virtual address.QQ+y1\a*INVLDPEPORT, unknown PE port block formatlyzer8The PE port driver version does not match SDA's version.6Therefore SDA cannot analyze the data for this clustercommand.Contact HP Customer Support.RRW0V1afi/ATTFAIL, failed to attach to specified processlyzer;The specified process name or process identification is notvalid for this operation.9Verify that the process name or identification is correct;and that the process has not been deleted. If you specify a6process name, it must be in the same group you are in.SS1U1bg0NOTSAVED, 'LMB-name' not saved in the dump filelyzer=Information corresponding to a logical memory block (LMB) has=not been saved in this subsetted dump file. The dump file may=or may not be useful for analysis, depending on which LMB wasthen some analysis is possible, but some information might notbe available in the dump file.None.TT3r1di2NORMSSHARE, SDA/RMS shareable image not availablelyzer=SDA cannot find the SDA extension image used to implement RMS3SDA commands, so those commands cannot be executed.Contact HP Customer Support.UU1/h1bg0NORSBNAM, no resource block with specified namelyzer.No resource was found with the specified name.9Specify the correct name in the SHOW RESOURCE command, or-specify no name to display all the resources.VV13M1bg0NOSPLOWNED, all requested spinlocks are unownedlyzer2The requested spin locks are not owned by any CPU.SHOW SPINLOCKS. The index specified does not correspond to anyspin lock in the system.8Reenter the command. Specify a valid spinlock index or aspinlock name.ZZ5CH1fk4BADSPLNAME, no spinlock could be found by that namelyzer7An incorrect name was specified to the SDA command SHOW SPINLOCKS.7Reenter the command. Specify a valid spinlock name or aspinlock index.[[\`F1(nEALPHADUMP, dump file header FLAGS2 DMP$V_ALPHADUMP is set indicating an Alpha dumplyzer9The dump file you are trying to analyze was written on an=OpenVMS Alpha system and cannot be analyzed using the OpenVMSVAX System Dump Analyzer.:Use the OpenVMS Alpha System Dump Analyzer to analyze this dump file.\\>1ot=BADCHKSUM, dump header checksum incorrect; continuing anywaylyzer6The header of the dump being analyzed has an incorrect7checksum, indicating that the dump has been modified or/corrupted. Dump analysis might not be possible.9No action is required if the cause of the modification or;corruption is known, and the dump can still be analyzed. If2the problem persists, contact HP Customer Support.]][y1$DBADOVER4GB, dump file contains data written directly from addresses over 4GBlyzer;The system dump includes data from a physical address above8the first 4 gigabytes of system memory. This data cannot8be written correctly in all configurations and may cause$confusion when the dump is analyzed.;This message indicates that all of the following conditionsexist:'o The total system memory exceeds 4 GB.-o Resident libraries have not been installed./o The boot driver does not support virtual I/O.;o Memory from a physical address above 4GB has been written to the dump.=Under these conditions, a selective memory dump is taken even9if a full memory dump is requested. Also, the dump is not-compressed even if compression was requested.2Ensure that resident libraries are used. These are9automatically installed when AUTOGEN is used to configure the system.^^C1ty8BBADPSBARRAY, invalid value in PSB array; array has been corruptedlyzer;SDA determined that the PSB array for the specified process;contains data that does not conform to design requirements.=This status indicates that one or more cells in the array arecorrupt.9Examine the contents of the PSB to determine whether this>corruption is responsible for or related to the problems being analyzed.__4u1ej3CMDNOTVLD, command not valid on the running systemlyzer>An SDA command was entered while analyzing the running system.5The command is valid only when analyzing a dump file.None.``&($1W\%BADSYM, unknown symbol 'symbol-name'lyzer'SDA cannot identify a specified symbol.#Correct the spelling of the symbol.aa.1_d-NOTVALID, information not in physical memorylyzer:The virtual address specified is not currently in physicalReenter the READ command, and include the applicable /IMAGE or/SYMVA qualifier.cc 8-81in7EMPTYNEST, nested command procedures are not supportedlyzer,A nested SDA command procedure was detected.7Rewrite the command procedure so that it is not nested.dd _1BCBLOCKMAPTOOBIG, compression block map too big for SDA to handle;< may not be possible to copy dump correctlylyzer;The compression block map in the dump is too big for SDA to=read. In override mode, attempts to copy the dump fail if the=portion of the compression block map actually used is too big>for SDA to read. In normal operation, SDA attempts to read theThe error log buffers in the dump are too big for SDA to read.;In override mode, attempts to extract the error log buffers;may fail. In normal operation, SDA attempts to read all theThe structure displayed contains data that cannot be formatted properly.>If further analysis is required, use the SDA FORMAT command toexamine the structure.b271cht1TPSINVBLK, invalid block type in specified blocklyzer6An attempt was made to copy an unrecognized structure.;For an active system, retry the command. For a system crashbackup save set containing the output of the SDA command. Thencontact HP Customer Support."]{1SX0!NOLKB, no lock block for this idlyzer:The ID specified in the SHOW LOCK or SHOW RESOURCE command!does not match any known lock ID.9Specify a valid lock ID in the SHOW LOCK or SHOW RESOURCE5command, or specify no ID to display all the locks or resources.?1pu>TPSTERM, TP Services structure display terminated prematurelylyzer4The selected SDA command was unable to complete. The8transaction-processing (TP) structures displayed by thiscommand are corrupt.None.>0v1ot=NOLKBNAM, no locks or resources with specified resource namelyzer/No lock or resource matches the specified name.6Specify a valid name in the SHOW LOCK or SHOW RESOURCE>command, or specify no name to see all the locks or resources.,*31]b+SCSNODNFND, SCSNODE: 'node-name' not foundlyzer)The specified cluster node was not found.2Check whether you entered the node name correctly.1PUTPSUTCERR, no valid timestamplyzer;The displayed structure can contain an optional time stamp.=The structure displayed currently does not have a time stamp.This message is informational.None.:US1kp9PDRANGE_INVALID, /PD qualifier cannot be used with rangelyzer9An EXAMINE command specifies both the /PD qualifier and arange of memory locations.=Reenter the command and specify either the /PD qualifier or arange, but not both.g1y@LINKTIMEMISM, link time of 'file-name' ('dd-mmm-yy hh:mm') doesC not match link time of image in 'target' ('dd-mmm-yy hh:mm')lyzer>The copy of SYS$BASE_IMAGE.EXE used by SDA to build its symbol:table is not the same version as that used when the systembeing analyzed was booted.8This message is only a warning. SDA continues unless the'mismatch causes an unrecoverable error.:Ensure that logical name ALPHA$LOADABLE_IMAGES points to a;directory containing the same version of SYS$BASE_IMAGE.EXE8that was used when the system being analyzed was booted.x,"1]b+NOLOCKS, no locks taken out in this systemlyzer!There are no locks in the system.None.>,F1]b P+MEMNOTACC, memory locations not accessiblelyzer=The dump is being examined in override mode. In this mode, no;commands that access the dump using a memory address can be-used (for example, the SHOW SUMMARY command).:In override mode, use only commands such as SET OUTPUT and SHOW DUMP.+8S1\a*MISSINGQUALS, needed qualifiers not givenlyzer7Some required qualifiers were omitted from the command.=Review the documentation and reissue the command with all therequired qualifiers.>@1qv3P?PFNNOTMPD, PFN from PTE not mapped by RPB's memory descriptorslyzer;The command specified a physical page that is not mapped byB>1sxPANODUMPHERE, only the error log buffers were written to this filelyzer3The ANALYZE/CRASH command was run on the stub file,>SYS$ERRLOG.DMP. This file looks like a dump file, but contains&only the header and error log buffers.=Analyze the correct file, either SYSDUMP.DMP or PAGEFILE.SYS.e&1DPHYNOTIMPL, /PHYSICAL option not implemented for remote systems and SCD target systemslyzer4The /PHYSICAL qualifier was illegally specified on a5command when SDA was being used to access System Code;Debugger (SCD) targets or was being used as remote SDA. The9/PHYSICAL qualifier is valid only with the ANALYZE/SYSTEMaddress that maps to the desired physical address; then repeat8the original command without the /PHYSICAL qualifier andSDA could not open the dump file for write access when invokedNOSYMBOLS, no 'block-type' symbols found to format this blocklyzer;SDA cannot locate the symbols needed to format a block as aparticular block type.;Use the SDA command READ to include the specific block type symbols in the SDA symbol table.""TRL1(An invalid CPU ID was specified for the SDA command SET CPU or>SHOW CPU. The CPU ID is invalid either because there is no CPU;in the system with the specified CPU ID, or because the CPU=with the specified CPU ID was never booted and was not active"at the time of the system failure.(Reenter the command with a valid CPU ID.##F3C1di2INFLATE, copying dump data in decompressed formatlyzer:As requested, SDA is copying the dump data in decompressedformat.None.$$H-_&1^c,INVREGID, no region matches the supplied IDlyzerThe process specified in a SHOW PROCESS or SET PROCESS command8is inaccessible either because it was swapped out of the7balance set or suspended (when using the ANALYZE/SYSTEM:command) or it was swapped out of the balance set when the5system failed (when using the ANALYZE/CRASH command).None.))R E1v{DINCDUMPFORM, dump file format incompatible with this version of SDAlyzer:An attempt was made to analyze a dump file taken under one9version of the OpenVMS operating system with an SDA image:built against another version. The format of the dump file9changed between the two versions of the OpenVMS operating#system, making analysis impossible.9Analyze the dump file with an SDA image built against the=version of the OpenVMS operating system that was running whenthe dump file was taken.**WSD1uzciCNOCBMAP, compression block map unreadable for compressed dump datalyzer:The header of the dump file specified in the ANALYZE/CRASH8command indicates that the dump file contains compressed:data, but SDA was unable to locate a compression block map9for decoding the data. Therefore, the dump is unreadable.None.++V=1nsparameter SAVEDUMP to 1. To make this change permanent, modifyEXPTOOLRG, expression too large for specified command optionslyzer>The value specified for a /BYTE or /WORD qualifier in a SEARCH(command is larger than a byte or a word.7Either change the value to a size that is valid for the4specified qualifier, or use a different qualifier to"accommodate the size of the value.11d.)v1_d-NOPRLOCK, no locks taken out by this processlyzer(No locks were taken out by this process.7Make sure the correct process is set as the current SDA=process. See SDA online help for Process_Context for details.22e.U^1_d-OPENOUT, error opening 'file-name' as outputlyzer>An error occurred when SDA attempted to create the output filefor a COPY operation.was not written completely. This can be caused by a small dump#file or errors during the bugcheck.;Check the console messages during the bugcheck. If the dump1ot%=HDRERRS, errors occurred writing the dump file header blockslyzer5The first block of the dump file contains informationThe process of writing out the dump file was aborted. The dump=file is not complete, and it is not useful for dump analysis.None.;;KpVK1]@COPYFAIL, unable to copy the data in this dump file: error code #'number'lyzer>w5<1fk4NOQUEUE, no queue has been specified for validationlyzer;The VALIDATE QUEUE command specified 0 or no queue address.Specify a valid queue address.??$x5<1fk64SPTNOTFND, system page table not found in dump filelyzer=The operating system was unable to copy the system page table9to SYSDUMP.DMP when it failed. As a result, SDA could notexamine the dump file.;None. The system page table is vital to SDA initialization.@@y21ch1SPWNFAIL, failed to spawn a process as specifiedlyzer;Either a process quota was exceeded, or SDA failed to spawn=a process that satisfies the criteria specified in an /INPUT,/OUTPUT, or /PROCESS qualifier.7Check the qualifier values to make sure they are valid.=Check whether the process quotas have been exceeded. For moreA system dump was written to PAGEFILE.SYS because there was nothe dump from the pagefile. When the dump has been copied from;the pagefile, SDA releases the pagefile space that was used=to hold the dump. Because further attempts to access the dump;would produce unpredictable results, SDA immediately exits.location may be an implied reference to memory made during theexecution of an SDA command.None.DD(fIU1:CTBL2SMALL, cannot completely format data structure; only 'integer'! symbols are displayedlyzer=The FORMAT command did not allocate enough space for the data structure.Check the ANALYZE/RELEASE command to ensure that the file namehas been specified correctly.GGs1KPBADPROC, no such processlyzer=The process name specified in the DCL command SHOW PROCESS or4SET PROCESS refers to a process that does not exist.Specify the correct process.HH^J1UANOFILENAME, an image in the EXEC list does not have a valid file name; not readlyzer9SDA found an image with no file name while processing the6READ/EXECUTIVE command. This condition occurs when the;directory and file specification exceed the system loader's39-character limit.:Reload the system image using a shorter directory and filespecification.IIDCU1uzCNOTPSHARE, shareable image for TP Services SDA support unavailablelyzerV1ot=NOREQ, symbol 'symbol-name' not found in system symbol tablelyzer=SDA cannot find a symbol in the SYS.STB file that is requiredfor SDA initialization.None.LL:V.1kp9NOREQSYM, symbol 'name' not found in system symbol tablelyzer=SDA cannot find a symbol in the SYS.STB file that is requiredfor SDA initialization.-Check the integrity of the symbol table file.MM';01X]&OUTOFRANG, lock id out of valid rangelyzer:The specified lock ID is greater than the maximum lock ID./Use the SHOW LOCK command to display all locks.NN/(1`e.NORESOURC, no resources locked in this systemlyzer'No resources are locked in this system.None.OO?LA1pu>STACKNTFND, stack range not found; dumping up to invalid pagelyzer7The range of memory locations specified in a SHOW STACKcommand is invalid.9Reissue the SHOW STACK command, specifying a valid memoryrange.PP#p91TY"INVLDADR, invalid virtual addresslyzer>The virtual address lies outside the boundaries of the virtual0addresses mapped by the system page table (SPT).8Reenter the command, specifying a valid virtual address.QQ+y1\a*INVLDPEPORT, unknown PE port block formatlyzer8The PE port driver version does not match SDA's version.6Therefore SDA cannot analyze the data for this clustercommand.Contact HP Customer Support.RRW0V1afi/ATTFAIL, failed to attach to specified processlyzer;The specified process name or process identification is notvalid for this operation.9Verify that the process name or identification is correct;and that the process has not been deleted. If you specify a6process name, it must be in the same group you are in.SS1U1bg0NOTSAVED, 'LMB-name' not saved in the dump filelyzer=Information corresponding to a logical memory block (LMB) has=not been saved in this subsetted dump file. The dump file may=or may not be useful for analysis, depending on which LMB wasthen some analysis is possible, but some information might notbe available in the dump file.None.TT3r1di2NORMSSHARE, SDA/RMS shareable image not availablelyzer=SDA cannot find the SDA extension image used to implement RMS3SDA commands, so those commands cannot be executed.Contact HP Customer Support.UU1/h1bg0NORSBNAM, no resource block with specified namelyzer.No resource was found with the specified name.9Specify the correct name in the SHOW RESOURCE command, or-specify no name to display all the resources.VV13M1bg0NOSPLOWNED, all requested spinlocks are unownedlyzer2The requested spin locks are not owned by any CPU.SHOW SPINLOCKS. The index specified does not correspond to anyspin lock in the system.8Reenter the command. Specify a valid spinlock index or aspinlock name.ZZ5CH1fk4BADSPLNAME, no spinlock could be found by that namelyzer7An incorrect name was specified to the SDA command SHOW SPINLOCKS.7Reenter the command. Specify a valid spinlock name or aspinlock index.[[\`F1(nEALPHADUMP, dump file header FLAGS2 DMP$V_ALPHADUMP is set indicating an Alpha dumplyzer9The dump file you are trying to analyze was written on an=OpenVMS Alpha system and cannot be analyzed using the OpenVMSVAX System Dump Analyzer.:Use the OpenVMS Alpha System Dump Analyzer to analyze this dump file.\\>1ot=BADCHKSUM, dump header checksum incorrect; continuing anywaylyzer6The header of the dump being analyzed has an incorrect7checksum, indicating that the dump has been modified or/corrupted. Dump analysis might not be possible.9No action is required if the cause of the modification or;corruption is known, and the dump can still be analyzed. If2the problem persists, contact HP Customer Support.]][y1$DBADOVER4GB, dump file contains data written directly from addresses over 4GBlyzer;The system dump includes data from a physical address above8the first 4 gigabytes of system memory. This data cannot8be written correctly in all configurations and may cause$confusion when the dump is analyzed.;This message indicates that all of the following conditionsexist:'o The total system memory exceeds 4 GB.-o Resident libraries have not been installed./o The boot driver does not support virtual I/O.;o Memory from a physical address above 4GB has been written to the dump.=Under these conditions, a selective memory dump is taken even9if a full memory dump is requested. Also, the dump is not-compressed even if compression was requested.2Ensure that resident libraries are used. These are9automatically installed when AUTOGEN is used to configure the system.^^C1ty8BBADPSBARRAY, invalid value in PSB array; array has been corruptedlyzer;SDA determined that the PSB array for the specified process;contains data that does not conform to design requirements.=This status indicates that one or more cells in the array arecorrupt.9Examine the contents of the PSB to determine whether this>corruption is responsible for or related to the problems being analyzed.__4u1ej3CMDNOTVLD, command not valid on the running systemlyzer>An SDA command was entered while analyzing the running system.5The command is valid only when analyzing a dump file.None.``&($1W\%BADSYM, unknown symbol 'symbol-name'lyzer'SDA cannot identify a specified symbol.#Correct the spelling of the symbol.aa.1_d-NOTVALID, information not in physical memorylyzer:The virtual address specified is not currently in physicalReenter the READ command, and include the applicable /IMAGE or/SYMVA qualifier.cc 8-81in7EMPTYNEST, nested command procedures are not supportedlyzer,A nested SDA command procedure was detected.7Rewrite the command procedure so that it is not nested.dd _1BCBLOCKMAPTOOBIG, compression block map too big for SDA to handle;< may not be possible to copy dump correctlylyzer;The compression block map in the dump is too big for SDA to=read. In override mode, attempts to copy the dump fail if the=portion of the compression block map actually used is too big>for SDA to read. In normal operation, SDA attempts to read thesignificant; SEARCH does not need to store records that follow the match.7Specify a smaller window, or ask your system manager to increase your paging file quota.:(2.1Y['WDW_MAXPRM, too many window parametersnd1The /WINDOW parameter is not specified correctly.-Reenter the command using the correct syntax.: %;1VX$BADFORM, invalid option for /FORMATnd8The /FORMAT qualifier option is invalid. An accompanying=message provides more information about why the format optionis not acceptable.:Reenter the command using one of the valid format options.:A$9*1UW#BADLIMIT, invalid value for /LIMITnd8An illegal value was specified for the /LIMIT qualifier.)Specify a positive number greater than 0.:B"8*1SU!BADSKIP, invalid value for /SKIPnd7An illegal value was specified for the /SKIP qualifier.)Specify a positive number greater than 0.:S%:1VX$BADMATCH, invalid option for /MATCHnd7The /MATCH qualifier option is invalid. An accompanyingsearched and the numbers displayed with the error message, and5have your system manager contact HP Customer Support. :d[1HJ NOFILE, no file foundnd:The SEARCH command cannot open any files in the input file(list. Therefore, no files were searched.=If files were incorrectly specified, reenter the command withcorrect file specifications. :&#1WY|%NOSTRING, no search string specifiednd"A search string was not specified.Specify a search string. :o= 1np{for SEARCH internal buffers. The records were shortened to theThe specified file is empty. This condition can occur when the3file is currently being written by another process.None. :&~1WY%NOMATCH, 'file-spec' - 'xxx' recordsndbut the files did not contain the search strings. This messageis informational.None.:CSRV, Security Ser0S11ad/SERVERNOTACTIVE, security server is not activever;A request was made of the security server but the server isnot currently running.0Start the security server and retry the request.:+11\_*SERVERRESTART, security server restartingver0As requested, the security server is restarting.None.: /4f1`c.SERVERSHUTDOWN, security server shutting downver3As requested, the security server is shutting down.>None required. If you wish to start a security server, use the&DCL command SET SERVER SECURITY/START.:p D1uxCSERVERTERMINATED, an error caused the security server to terminatever:An error caused the security server to perform cleanup and;terminate break-in detection, evasion processing, and proxy processing.8Use the DCL command SET SERVER SECURITY/START to restart;the security server. If this condition persists, contact HPCustomer Support.: F*1wzECONSTERROR, security server experienced a CONSTRAINT_ERROR exceptionver)An error occurred in the security server.Contact HP Customer Support.:/8 a}/1A>COULDNTRESTART, security server cannot restart because of the! following error:ver:The security server was directed to restart itself but the9error reported in the accompanying message prevented thisaction..Take action based on the accompanying message.:9 AY/1ru@COULDNTSTART, security server cannot start functioning properlyverIf a proxy database exists, make sure that it is in SYS$SYSTEM0or that the logical name NET$PROXY points to it.;If a proxy database does not exist, create one by using the;DCL command RUN SYS$SYSTEM:CONVERT_PROXY to convert the old;NETPROXY.DAT file or by issuing the CREATE/PROXY command in9the Authorize utility to create a new NET$PROXY.DAT file.:{cp1$EASSIGNFAILED, security server failed to assign a channel to a client reply mailboxver8The security server's call to the $ASSIGN system service6failed to assign a channel to the requestor's mailbox.Contact your system manager.: |ej/12EAUDITFAILED, security server failed to audit an event because of the following error:ver=The security server could not perform an audit because of the+error reported in the accompanying message..Take action based on the accompanying message.:|B*1svATASKERROR, security server experienced a TASKING_ERROR exceptionver)An error occurred in the security server.Contact HP Customer Support.:RVnl1dBCIASHUTDOWN, breakin detection and evasion processing is shutting downver>The break-in detection and evasion processing component of the.security server is shutting down upon request.:None required. If you wish to restart the security server,0issue the DCL command SET SERVER SECURITY/START.:Wc~T1iEBADJOBTYPE, an invalid job type was used to audit a login failure or breakin attemptver9A request to audit a login failure in the security server:failed because the type of job specified in the request isinvalid.8Specify the job type correctly and retry the call to theintrusion system services. :Ym1ECIASTARTINGUP, breakin detection and evasion processing now starting upver>The break-in detection and evasion processing component of the-security server is starting up, as requested.None.!!:/9N1jmA8BADLOCALUSERLEN, local user name length is out of rangever;The proxy record you want to add contains a local user namethat is too long.;Specify a user name that is valid for your environment. The9proxy services accept 32 characters but currently OpenVMSallows only 12."": fe1=CIATERMINATED, an error caused breakin detection and evasion' processing to terminatever7An error occurred in the break-in detection and evasion,processing component of the security server.Contact HP Customer Support.##:99O1jmK8BADNODENAMELEN, remote node name length is out of rangeverSpecify a remote node name that is valid for your environment.>The proxy services allow 1024 characters but currently OpenVMSallows only 256.$$:8O61il7BADREMUSERLEN, remote user name length is out of rangever01or=CREMBXFAILED, security server failed to create input mailboxver/The security server could not create a mailbox.Contact HP Customer Support.**:eR1@DASSGNFAILED, security server could not deassign a channel to a# client reply mailboxver>The security server could not deassign the channel assigned tothe reply mailbox.Contact HP Customer Support.++:0`S1ad/DBALREADYEXISTS, proxy database already existsver>The security server cannot create a new proxy database because a proxy database already exists.=Delete or rename the current proxy database before attemptingto create a new one.,,:uia1?OUTCOMTERMINATED, security server's outgoing message mechanism( failed and is exitingver8An error occurred in the security server's communication'system and the server is shutting down.:Issue the DCL command SET SERVER SECURITY/START to restart;the security server. If this condition persists, contact HPCustomer Support.--:Z<j1mpl;DUPLICATEUSER, username already exists in the proxy recordver=A request was made to add a local user name to a proxy record+that already contains that local user name.:Use the SHOW/PROXY command in the Authorize utility to see=what proxy records exist for a specific combination of remotenode name and user name...:Y?Q1psk>INSUFINFO, not enough information to produce a breakin recordver:A request to produce a break-in record did not contain therequired information.records and reconvert the proxy database using the DCL commandCheck whether a new format NET$PROXY.DAT proxy database exists>and use the DCL command SET SERVER SECURITY/START to start the+security server if it has not been started.;If a proxy database does not exist, create one by using the;DCL command RUN SYS$SYSTEM:CONVERT_PROXY to convert the old;NETPROXY.DAT file or by issuing the CREATE/PROXY command in9the Authorize utility to create a new NET$PROXY.DAT file.:::9.1jm8QIOFAILED, security server QIO on client mailbox failedver-An error has occurred in the security server.Contact HP Customer Support.;;:QO61 >:!C!1RU SUSPECT, matching suspect foundver8A record matching the request was found in the intrusion database. None. The search was successful.??:$Ws816ATOOMANYUSERS, proxy already has the maximum number of associated usersver>A request was made to add a local user entry to a proxy record3that already has the maximum number of local users.7Delete a local user entry to make room for the new one.@@:\1?VERIFY_CONVERSION, verifying that proxy database conversion is correctver:The contents of the new proxy database, NET$PROXY.DAT, are9being compared to the contents of the old proxy database, NETPROXY.DAT.None.AA:T, SET Command and% GZ1Vb$NOAUDSRV, Audit server not running. SET Utility=The audit server cannot receive information because it is notrunning.>The system manager must enter a SET AUDIT/SERVER=START commandto start the audit server.BB:b M51!>OBSPASSALL, terminal set to PASSALL mode even though /PASSALL" qualifier is obsolete SET Utility:You specified the obsolete /PASSALL qualifier with the SETTERMINAL command.4Use the /PASTHRU qualifier to perform this function.CC: * R1[g)DEVSET1, 'device-id' set to '/qualifier' SET Utility;This informational message displays the default setting forthe specified device.None.DD: 5 J1fr4BADFRMT, volume is not mounted with Files-11 format SET UtilitySHOW SECURITY commands can operate only against objects on the local node.9Use the SET HOST command to log in to the remote node and9reissue the command there without the node specification.II:0! ,;1R^ NOTDIR, file is not a directory SET Utility+The specified file is not a directory file.:Reenter the command specifying an existing directory file.JJ:20 "l1am/NOTDISK, device must be a Files-11 format disk SET Utility;The operation you are trying to perform requires a Files-11=format disk. The device that is specified does not meet theseMake sure that the device meets the requirements of a Files-11,format disk before performing the operation.KK:9 01Q]MODESET, process set to 'mode' SET Utility/The process has been set to the specified mode.None.LL::, 1]i+MODIFIED, 'file/directory/volume' modified SET Utility8The requested file, directory, or volume is successfully=modified. This message is displayed when you specify the /LOG qualifier.None.MM::& 6/1Wc%PROERR, error protecting 'file-name' SET Utility5An error occurred when the file's protection was set..Take action based on the accompanying message.NN:<2 +/1co1PRONOTCHG, protection on 'file-name' not changed SET Utility*The protection on the file is not changed..Take action based on the accompanying message.OO:=; v1lx :NOCTRLMBX, audit server control mailbox assignment failed SET Utility8The SET AUDIT command cannot complete because the system? A1p|+l>AIJREQ, after-image journal filespec required (FILE= keyword) SET Utility:The FILE keyword must be used with the SET FILE/AI_JOURNAL=command. To protect against disk corruption, place the after-5image journal on a different disk from the data file.7Reenter the SET FILE/AI_JOURNAL command, using the FILEkeyword.QQ:>@ 1q}?PROTECTED, 'file-name' file protection changed to 'protection' SET Utility7The file protection has been successfully changed. This:message is displayed when a SET FILE/PROTECTION command is entered with the /LOG qualifier.None.RR:C> %/1o{=OPENDIR, error opening parent directory for 'directory-name' SET Utility$A parent directory cannot be opened..Take action based on the accompanying message.SS:TN3 C1dp#f2INVDEV, device is invalid for requested operation SET Utility7The device type that is specified is not allowed in the7particular operation. For example, entering the command9SET DEVICE/SERVED CSA1 to serve the console floppy is notallowed.7Make sure the device meets all the requirements for the operation.TT:PY ND1(DNOPOLLREMOTE, cannot enable or disable multipath polling on an MSCP path SET Utility9An attempt was made to use the served path of a multipathdevice for polling.=Do not try to enable or disable multipath polling on a remotepath.UU:P) P1Zf(IVJFAT, invalid journal file attributes SET Utilitya user program that modifies a journal or by specifying a file that is not a valid RMS journal.7Specify a valid RMS journal. If you believe a valid RMS:journal was specified, retain any relevant information andcontact HP Customer Support.XX:TR# /1T`7f"IVJNLACE, invalid RMS journal ACE SET Utility8When a file is marked for journaling that was previously;marked for journaling, the Set utility attempts to read the 1o{#@=NOTF64, /CACHING qualifier supported only on a Files-64 disk SET Utility6One of the files or directories listed on the SET FILE=command is not in a Spiralog volume. You can use the /CACHING2qualifier only for Spiralog files and directories.>Make sure that all the files and directories listed on the SET%FILE command are in Spiralog volumes.;To check whether a volume is a Spiralog volume, use the DCL;command SHOW DEVICES/FULL. The first line displayed by this>command shows a device type of Files_64 for a Spiralog volume.\\:z\ )1Q]UNLOCKED, 'file-name' unlocked SET Utility(The file has been successfully unlocked.None.]]:^W 3h1/>IVORDER, order of ACEs being modified is incorrect for object 'object-name' SET Utility2The order of the ACEs being replaced is incorrect.4Verify the order of the ACEs being replaced with the2DIRECTORY/ACL command or the DCL SHOW ACL command.^^:^( 4/1Ye'UNLOCKERR, error unlocking 'file-name' SET Utility3An error occurred when the file was being unlocked..Take action based on the accompanying message.__:`5 /1frp4IVPJFILE, invalid previous journal file 'file-spec' SET Utility8When a file is marked for journaling that was previously:marked for journaling, the Set utility attempts to write a:trailer record to the previous journal. The Set utility is>unable to open the previous journal, so it could not write thetrailer record..Take action based on the accompanying message.``:`: /81kw9OPERREQ, OPER privilege required for /ACCESSED qualifier SET Utility.OPER privilege is required for this qualifier.7See your system manager about obtaining OPER privilege.aa:c9 y1jv8SYSNOTUPD, I/O database not updated for volume 'volume' SET UtilityAn error occurred while trying to write to the home block of avolume..Take action based on the accompanying message.dd:j1 ZG1bn0PWDLOCKED, password is locked to prevent change SET Utility:You attempted to change a password that has been locked toprevent it from being changed.when prompted for the old password. If you have forgotten your!password, see the system manager.ii:q( u1Ye'MSCPNOTLD, MSCP-Server code not loaded SET Utility -1o{ 6=PWDNOTVER, new password verification error; please try again SET Utility>The password was not changed because the password you typed atuse this file specification with the /JOURNAL qualifier to theRECOVER/RMS_FILE command.mm:z' /1Xd&JFILE, using journal file 'file-spec' SET Utility=When the /LOG qualifier to the SET FILE command is used, thisNOEVENTS, no valid auditing events specified; command ignored SET Utility2No alarm or audit events were enabled or disabled.>Verify that the security class is correct and that one or more;valid security audit events is specified. See the SET AUDITFILE was specified on a node that is not authorized to perform9RMS journaling. The specified operation is performed. Thejournal the file from a node that is not authorized to perform8RMS journaling, the program receives an error status. To>correct the warning message, fix the error condition specified>by the License Management facility. See the HP OpenVMS License/Management Utility Manual for more information.mpression block map in the dump is too big for SDA to=read. In override mode, attempts to copy the dump fail if the=portion of the compression block map actually used is too big>for SDA to read. In normal operation, SDA attempts to read theDINVMVIP, path switch invalid while device 'device-name' is in mount verification SET Utility7A path switch was requested for a device that is in the;process of mount verification. Manual path switching is not0allowed while mount verification is in progress.3Use the SHOW DEVICE command to determine when mount5verification has completed; then reissue the command.y> 1o{$=QUALINV, invalid qualifier specified for this security class SET UtilityThe /[NO]ENABLE or /[NO]POLL qualifier was specified without avalue for the /PATH qualifier.NOSUCHPATH, path 'path-description' does not exist for device 'device-name' SET Utility>The path specified by the /PATH qualifier cannot be located as a path for the specified device.:Verify that you have specified the correct path and devicename and try the command again.yV 1?NORETENSION, function not available on 'device-id'; /RETENSION ignored SET Utility>You cannot set /RETENSION for the specified device. Currently,5only TZK10 magnetic tape devices allow the /RETENSION qualifier.None.y5 3t1fr4JOPENIN, error opening journal 'file-spec' as input SET Utility2An error occurred opening or creating the journal.=Either create the journal by specifying the CREATE keyword to5the SET FILE command, or specify the correct journal.y% ]/1Vb$CLOSEERR, error closing 'file-spec' SET Utility8An error occurred while attempting to close a file whose#characteristics have just been set..Take action based on the accompanying message. y-V \P1?CPATHAMBIG, path 'path-descriptor' is ambiguous for device 'device- name' SET UtilityIf you do not want the local node to serve TMSCP tape devices,:no action is required. If you want the local node to serve8locally connected tapes, refer to the HP OpenVMS Cluster;Systems manual for information about loading the TMSCP tapeserver at system generation.yM8 51iu*_7NOTUQPORT, device not connected to a UNIBUS/Q-bus port SET Utility>The DCL command SET DEVICE/DFAG was entered for a device other;than a UDA50 controlled disk, an RC25 disk drive, or a TU819tape drive. This command is valid only for these devices.4Make sure the device number is one of these devices.ytb wp1@BADPOLCHAR, HBMM policy name contains invalid characters-please check documentation SET UtilityDelete any unused HBMM named policies before defining any more:HBMM named policies. To delete a named policy, use the DCL:command SET SHADOW /POLICY=HBMM /DELETE /NAME=policy_name.y'< lT1my9;KEYWINV, invalid keyword specified for this security class SET Utility;The /LIKE=PROFILE=TEMPLATE qualifier was used with a source/security class that cannot serve as a template.1Specify only /CLASS=SECURITY_CLASS when using the!/LIKE=PROFILE=TEMPLATE construct.y/ g1`l1.NODEVPOL, no HBMM policy for specified device SET Utilityattempted to enable HBMM on a shadow set that does not have an HBMM policy.9Define an HBMM policy for the specified shadow set before,attempting to enable HBMM on that shadow set y D ]?1uCNOMODNONEPOL, HBMM policy NODEFAULT cannot be redefined or deleted SET Utility8You tried to redefine or delete the Host-Based Minimerge#(HBMM) HBMM named policy NODEFAULT.>None. The NODEFAULT named policy cannot be changed or deleted.!!ym6 I1gs65NONAMPOL, specified HBMM named policy does not exist SET Utility>You tried either to delete a Host-Based Minimerge (HBMM) named;policy or to use a named policy to create a device-specific 1o{ =FILMARKAI, 'file-spec' marked for RMS after-image journaling SET Utility=This message appears when the SET FILE/AI_JOURNAL/LOG command:is used, and the Set utility successfully marks a file forafter-image journaling.;Be sure that this is the file you intend to mark for after-;image journaling. Note the file specification for later use0with the RECOVER/RMS_FILE and SET FILE commands.''y ? 1p|>FILMARKBI, 'file-spec' marked for RMS before-image journaling SET Utility=This message appears when the SET FILE/BI_JOURNAL/LOG command:is used, and the Set utility successfully marks a file forbefore-image journaling.;Be sure that this is the file you meant to mark for before-;image journaling. Note the file specification for later use0with the RECOVER/RMS_FILE and SET FILE commands.((y @ 1q}?FILMARKRU, 'file-spec' marked for RMS recovery-unit journaling SET Utility=This message appears when the SET FILE/RU_JOURNAL/LOG command:is used, and the Set utility successfully marks a file forrecovery unit journaling.DEVMOUNT, a volume is mounted on the device; you must use SET2 SECURITY to modify the security profile SET Utility>The SET DEVICE/ACL command cannot be used for a device with anODS-2 mounted volume.2To modify the volume security profile, use the SETfor the named file because the primary directory entry for thefile is not the one specified.9To modify the protection of a file and any alias entries,.specify only the primary directory file entry.22yAT 1MSBPJNOTRAIL, trailer record will not be written to previous journal file SET Utility8When a file is marked for journaling that was previously9marked for journaling, the Set utility is unable to write9a trailer record to the previous journal. This message isinformational.None.33y3F /1wEEPJOPENOUT, error opening previous journal file 'file-spec' as output SET Utility8When a file is marked for journaling that was previouslyPJVOLNAM, error translating previous journal file volume name 'file-spec' SET Utility8When a file is marked for journaling that was previously7marked for journaling, the Set utility cannot translate9DISK$volume_label, where volume_label is the volume labelof the previous journal.5Take action based on the accompanying message. If the:associated error message is "no logical name translation,"=the system manager must define an executive-mode logical name=of the form DISK$volume_label to point to the device on whichthe previous journal is stored.66ys c F1EINVAIJDEV, after-image journal 'file-spec' is on same device as data file 'file-spec' SET Utility:The after-image journal was stored on the same disk as the data file.5Reenter the SET FILE/AI_JOURNAL command, specifying a:different device name for the journal. Otherwise, the data-file is not protected against a disk failure.tion.CC: * R1[g)DEVSET1, 'device-id' set to '/qualifier' SET Utility;This informational message displays the default setting forthe specified device.None.DD: 5 J1fr4BADFRMT, volume is not mounted with Files-11 format SET UtilitySHOW SECURITY commands can operate only against objects on the local node.9Use the SET HOST command to log in to the remote node and9reissue the command there without the node specification.II:0! ,;1R^ NOTDIR, file is not a directory SET Utility+The specified file is not a directory file.:Reenter the command specifying an existing directory file.JJ:20 "l1am/NOTDISK, device must be a Files-11 format disk SET Utility;The operation you are trying to perform requires a Files-11=format disk. The device that is specified does not meet theseMake sure that the device meets the requirements of a Files-11,format disk before performing the operation.KK:9 01Q]MODESET, process set to 'mode' SET Utility/The process has been set to the specified mode.None.LL::, 1]i+MODIFIED, 'file/directory/volume' modified SET Utility8The requested file, directory, or volume is successfully=modified. This message is displayed when you specify the /LOG qualifier.None.MM::& 6/1Wc%PROERR, error protecting 'file-name' SET Utility5An error occurred when the file's protection was set..Take action based on the accompanying message.NN:<2 +/1co1PRONOTCHG, protection on 'file-name' not changed SET Utility*The protection on the file is not changed..Take action based on the accompanying message.OO:=; v1lx :NOCTRLMBX, audit server control mailbox assignment failed SET Utility8The SET AUDIT command cannot complete because the system? A1p|+l>AIJREQ, after-image journal filespec required (FILE= keyword) SET Utility:The FILE keyword must be used with the SET FILE/AI_JOURNAL=command. To protect against disk corruption, place the after-5image journal on a different disk from the data file.7Reenter the SET FILE/AI_JOURNAL command, using the FILEkeyword.QQ:>@ 1q}?PROTECTED, 'file-name' file protection changed to 'protection' SET Utility7The file protection has been successfully changed. This:message is displayed when a SET FILE/PROTECTION command is entered with the /LOG qualifier.None.RR:C> %/1o{=OPENDIR, error opening parent directory for 'directory-name' SET Utility$A parent directory cannot be opened..Take action based on the accompanying message.SS:TN3 C1dp#f2INVDEV, device is invalid for requested operation SET Utility7The device type that is specified is not allowed in the7particular operation. For example, entering the command9SET DEVICE/SERVED CSA1 to serve the console floppy is notallowed.7Make sure the device meets all the requirements for the operation.TT:PY ND1(DNOPOLLREMOTE, cannot enable or disable multipath polling on an MSCP path SET Utility9An attempt was made to use the served path of a multipathdevice for polling.=Do not try to enable or disable multipath polling on a remotepath.UU:P) P1Zf(IVJFAT, invalid journal file attributes SET Utilitya user program that modifies a journal or by specifying a file that is not a valid RMS journal.7Specify a valid RMS journal. If you believe a valid RMS:journal was specified, retain any relevant information andcontact HP Customer Support.XX:TR# /1T`7f"IVJNLACE, invalid RMS journal ACE SET Utility8When a file is marked for journaling that was previously;marked for journaling, the Set utility attempts to read the 1o{#@=NOTF64, /CACHING qualifier supported only on a Files-64 disk SET Utility6One of the files or directories listed on the SET FILE=command is not in a Spiralog volume. You can use the /CACHING2qualifier only for Spiralog files and directories.>Make sure that all the files and directories listed on the SET%FILE command are in Spiralog volumes.;To check whether a volume is a Spiralog volume, use the DCL;command SHOW DEVICES/FULL. The first line displayed by this>command shows a device type of Files_64 for a Spiralog volume.\\:z\ )1Q]UNLOCKED, 'file-name' unlocked SET Utility(The file has been successfully unlocked.None.]]:^W 3h1/>IVORDER, order of ACEs being modified is incorrect for object 'object-name' SET Utility2The order of the ACEs being replaced is incorrect.4Verify the order of the ACEs being replaced with the2DIRECTORY/ACL command or the DCL SHOW ACL command.^^:^( 4/1Ye'UNLOCKERR, error unlocking 'file-name' SET Utility3An error occurred when the file was being unlocked..Take action based on the accompanying message.__:`5 /1frp4IVPJFILE, invalid previous journal file 'file-spec' SET Utility8When a file is marked for journaling that was previously:marked for journaling, the Set utility attempts to write a:trailer record to the previous journal. The Set utility is>unable to open the previous journal, so it could not write thetrailer record..Take action based on the accompanying message.``:`: /81kw9OPERREQ, OPER privilege required for /ACCESSED qualifier SET Utility.OPER privilege is required for this qualifier.7See your system manager about obtaining OPER privilege.aa:c9 y1jv8SYSNOTUPD, I/O database not updated for volume 'volume' SET UtilityAn error occurred while trying to write to the home block of avolume..Take action based on the accompanying message.dd:j1 ZG1bn0PWDLOCKED, password is locked to prevent change SET Utility:You attempted to change a password that has been locked toprevent it from being changed.when prompted for the old password. If you have forgotten your!password, see the system manager.ii:q( u1Ye'MSCPNOTLD, MSCP-Server code not loaded SET Utility -1o{ 6=PWDNOTVER, new password verification error; please try again SET Utility>The password was not changed because the password you typed atuse this file specification with the /JOURNAL qualifier to theRECOVER/RMS_FILE command.mm:z' /1Xd&JFILE, using journal file 'file-spec' SET Utility=When the /LOG qualifier to the SET FILE command is used, thisNOEVENTS, no valid auditing events specified; command ignored SET Utility2No alarm or audit events were enabled or disabled.>Verify that the security class is correct and that one or more;valid security audit events is specified. See the SET AUDITFILE was specified on a node that is not authorized to perform9RMS journaling. The specified operation is performed. Thejournal the file from a node that is not authorized to perform8RMS journaling, the program receives an error status. To>correct the warning message, fix the error condition specified>by the License Management facility. See the HP OpenVMS License/Management Utility Manual for more information.mpression block map in the dump is too big for SDA to=read. In override mode, attempts to copy the dump fail if the=portion of the compression block map actually used is too big>for SDA to read. In normal operation, SDA attempts to read thepassword is sent to the external authenticator, but no attempt/is made to synchronize the password in the UAF.None.+21ch1TRYPWDSYNCH, attempting password synchronizationmmand>The external authenticator successfully performed the password=operation and is now attempting to modify the password on theuser's UAF record.None.PdC}l1tybBPWD2NOTSET, system manager must initially set secondary passwordsmmand>You tried to execute the SET PASSWORD/SECONDARY command for an=account that has not been set up to use a secondary password.;The system manager must use the Authorize utility to set up/the initial secondary password for the account.fX=1~EPWDINDIC, password found in system dictionary; please choose another stringmmand8To help enforce the use of secure passwords, the OpenVMS9operating system does not allow words to be selected that;are contained in the system password dictionary. The system9password dictionary contains approximately 50,000 Englishwords.PWDINHIS, password found in history list; please choose a new passwordmmand8To help enforce the use of secure passwords, the OpenVMSoperating system does not allow certain passwords that are toopassword is sent to the external authenticator, but no attempt/is made to synchronize the password in the UAF.None. {Tl1?SYMNOTFOU, global symbol 'symbol' not found in shareable image 'image'mmand>The OpenVMS operating system is unable to locate the specified,global routine in the named shareable image.;Ensure that the routine declaration is properly declared as9a GLOBAL symbol and that the LINK options file contains a UNIVERSAL option for the symbol. (U14:>NOPWDSYNCH, password could not be set; UAF synchronization is disabledmmand4The remote user ID cannot be determined and password:synchronization is disabled. The SYSUAF is not modified if8the password is maintained by an external authenticator.None.<PWD11111SET, SET PASSWORD CommandHADOW, Volume Shado:0!021an/NOCOPYMBR, Boot from copy member not permittedwing Software/A boot was attempted from a shadow copy member.1Reboot the system from a valid shadow set member.8J <!~R1mzJ;INCBDEX, boot device incompatible with existing shadow setwing Software:The boot device is not compatible with the existing system;disk shadow set recorded in the boot device storage controlblock.=Reboot the system using one of the other existing system diskshadow set members._7!^1hu6SYSLOG, unable to modify SYS$DEVICE/SYS$DISK logicalswing Software;Shadowing could not update system disk pointers and logical!names to point to a virtual unit.9Consult your system manager about the problem. The system8manager can check error logs for device problems, changeOne or more of the shadow set member storage control blocks is8incompatible with the boot device storage control block.1Reboot the system excluding incompatible members.f7![1hux6TIMORDSCB, Timeout attempting to read boot device SCBwing Software6Shadowing was not able to read the boot device storage>control block (SCB) during boot time for the number of seconds1specified in the SHADOW_SYS_TMO system parameter.;Verify that the boot device is ready and that the volume isproperly loaded on the device.B!p1s/ATIMOUPDSCB, Timeout attempting to update system disk member SCBswing Software;Shadowing was not able to update system disk member storage8control blocks (SCBs) during boot time for the number of9seconds specified in the SHADOW_SYS_TMO system parameter.There is not enough room in the nonpaged pool for shadowing to3allocate data structures required during boot time.>Reboot the system, stop during SYSBOOT, and increase the valueof the parameter NPAGEDYN.7?!zR1p}I>BDNOMBREX, boot device is not a member of existing shadow setwing Software;The boot device is not a member of the existing system disk=shadow set recorded in the boot device storage control block.=Reboot the system using one of the other existing system diskshadow set members.lA!Z1r$~@NOACCMBREX, unable to access all members of existing shadow setwing Software7A currently mounted shadow set member was not available9to this system during boot time for the number of seconds2specified in the SHADOW_SYS_WAIT system parameter.>Verify that the shadow set member device is ready and that thevolume is properly loaded.:!CK1kx9INVSSDVU, invalid shadow system disk virtual unit numberwing Softwarenumber of VOLSHAD-DISK license units for more than 60 minutes.6Attempts to bring the node into compliance by removing=unlicensed members from their shadow sets have failed. If any;new members are mounted, they might be removed immediately.that node. If necessary, dismount shadow set members until the;number of mounted members equals the number of VOLSHAD-DISK;license units loaded on the node. If you need more VOLSHAD-/DISK license PAKs, contact HP Customer Support.{&u13AINSUFPDL, insufficient per-disk license units loaded, shadow set8 member(s) will be removed in 'number' minutese Shadowing Server;The number of shadow set members mounted exceeds the number9of VOLSHAD-DISK license units loaded on the node. If this7condition is not corrected before the number of minutesmake the node compliant with the number of loaded VOLSHAD-DISKlicense units.7Dismount shadow set members until the number of mountedThe device is not the type of device that you specified in the command line.None.]$1MMioNONET, network unavailableThe network is unavailable.None.C0(t1YYU'NONODE, node specification not allowedSHOW SECURITY commands can operate only against objects on the local node.9Use the SET HOST command to log in to the remote node and9reissue the command there without the node specification.N_@R1qq`?NOPRIV, insufficient privilege to display complete informationsee license users in the same group and WORLD privilege to see!license users outside your group. r(u1YY'MSCPNOTLD, MSCP-Server code not loadedIf you do not want the local node to serve TMSCP tape devices,:no action is required. If you want the local node to serve8locally connected tapes, refer to the HP OpenVMS Cluster;Systems manual for information about loading the TMSCP tapeserver at system generation.%% 71hh6NOINTRUDERS, no intrusion records match specification;No intruder records that match the specification were found;in the database. This indicates that no break-ins have been5attempted since the last time the database was reset.None.&&A/i1``S.NODEVPOL, no HBMM policy for specified device:The DCL command SHOW SHADOW /POLICY=HBMM DSAn: specifies a>device that does not have a Host-Based Minimerge (HBMM) policyassigned to it.>Assign an HBMM policy before issuing the command, or specify a)shadow set that does have an HBMM policy.''$6^q1gg65NONAMPOL, specified HBMM named policy does not exist>The DCL command SHOW SHADOW /POLICY=HBMM specifies the name ofa policy that is not assigned.8Check whether the policy name was specified correctly or7assign the policy name before trying the command again.((u21OONOLICENSE, no licenses exist1No licenses are loaded, so none can be displayed.None.))/91``.NOLICMATCH, no licenses match search criteria8No licenses match the criteria specified in the command.None.**5L1ff4NOSUCHUSER, no processes found for user 'user-name'6You issued the SHOW USER command for a user who is notcurrently logged in.None.++* how Cluster U#'G1X^/&NONESEL, no display has been selectedtility?IVADDID, system # 'id-number' can not be added to the display.tilityNote that the system ID number must match the ID number in the=SYS_ID field and that it must be entered in the same radix as=that of the SYS_ID field. For more information about changing6the radix of a field, enter the HELP SET field/FORMAT.to the display. If the system ID is correct, be sure to removeselected report, so it cannot be added to the report. However,(the name is valid in a different report.>Select a different report or enter the HELP CLASSES command to get a list of available classes...:=>1ouML=IVADDNODE, node 'node-name' can not be added to the display.tility>Information for the system identified by the node name entered=is not available, or the node name entered is not the name of;a node previously removed from the display using the REMOVESYSTEM/NODE=node-name command.to the display. If the node name is correct, be sure to removeSHOW CLUSTER command is invoked with the /BEGINNING=beginning->time qualifier. The message indicates that the current process+will be suspended until the time indicated.None.::MB, Symbiont/Queue-".E1Sm!INVSTMNBR, invalid stream numberManager Interface Facility>3-1P[INVSTANAM, invalid state nament Facility2The length of the specified state name is invalid.,Choose a state name with 1 to 31 characters.?? "<1S^0!NOMOREKEYS, no more keys definednt Facility9When called repeatedly, SMG$LIST_KEY_DEFS returns all the6key definitions in a key table. When there are no more$definitions, this error is returned.;Modify your program to expect this condition, if necessary.@@ d 1GRSYNERR, syntax errornt Facility6The TERMTABLE compiler encountered invalid syntax (for,example, a misplaced or missing equal sign).Check your terminal definition.AAs 251cnP1WILUSERMS, output will be performed by RMS laternt Facility:Normally, the screen is updated at the end of every outputor an unknown terminal, then this message is given at the time*output would have been sent to the screen.4Use the SMG$SNAPSHOT routine to receive your output.BB  k]1KVINVARG, invalid argumentnt Facility>Either your program specified an invalid argument or the value+of an argument is not in the correct range.:Correct the program to specify a valid argument or a value!that is within the correct range.CC &\L1Wb %DIALINNOT, diagonal line not allowednt Facility=The vertices specified will result in a diagonal, rather thanvertical or horizontal, line.The TERMTABLE compiler needs an END statement to terminate thecurrent terminal definition. Check your terminal definitions.NN! <{@1mx3;MISFILSPE, missing file specification in REQUIRE statementnt Facility:The REQUIRE statement needs a file name in order to locate4external definitions that should become part of your TERMTABLE.0Add a file name to the REQUIRE statement in yourTERMTABLE.TXT.OO!%1Va$MISNAMREQ, expected NAME or REQUIREnt Facility;The TERMTABLE compiler expected TERMTABLE.TXT to begin withThe requested terminal definition is not found in the caller's2private copy of TERMTABLE or the system TERMTABLE.:If you intended to use a private terminal definition, make8sure that TERMTABLE.EXE exists in your private directory:and that the logical name TERM$TABLOC points to it. If you=expected your terminal to be defined in the system TERMTABLE,check with your system manager.RR#)T1u5AUNDTERNOP, undefined terminal - couldn't access private terminal tablent Facility8The requested terminal definition is not in the caller's6private copy of TERMTABLE or the system TERMTABLE. The=caller's private TERMTABLE cannot be accessed, either because6it does not exist or because RMS cannot open the file.9To use a private definition, make sure that TERMTABLE.EXE:exists in your private directory and that the logical name=TERM$TABLOC points to it. Make sure that you have read access to the file.SS*S}1@UNDTERNOS, undefined terminal - couldn't access system terminal tablent Facility8The requested terminal definition is not in the caller's5private TERMTABLE or the system TERMTABLE. The systemTERMTABLE is unavailable.=The system TERMTABLE should be mapped as a global section and>therefore should always be available. See your system manager.TT+ &-_1Wb%ILLVAL, Boolean value must be 0 or 1nt Facility,A Boolean capability has an incorrect value.=Check your terminal definitions. Boolean capabilities must be 0 or 1: on or off, respectively.UU+(P1Yd'PRISECMAP, private terminal table usednt FacilityThe system program that maps TERMTABLE.EXE as a global sectionis unsuccessful.=If there is already an existing global section for TERMTABLE,>the system manager must reboot the system in order to create anew global section.ZZ9 '1Xc&GBLSECMAP, system terminal table usednt Facility8The requested terminal definition is found in the system:TERMTABLE. The requested terminal definition did not exist"in the caller's private TERMTABLE.None.[[<}?1ITINVCOL, invalid columnnt Facility8An invalid column number is specified. It is either less:than 0 or larger than the number of columns in the virtualdisplay.>Specify a valid column. Columns are numbered beginning with 1.\\=$RP1U`#INVCOLARG, unknown color specifiednt FacilityMake sure you are passing the display identifier by reference,=not by value. Ensure that the display ID is previously set up(by a call to SMG$CREATE_VIRTUAL_DISPLAY.ccY 6d1gr95DSPIN_USE, operation invalid while display is activent Facility>The attempted operation is illegal while output to the virtual;display is active. For example, you cannot output text to a=display in an AST routine that interrupts an SMG$ call on the same display.6Synchronize your calls to SMG$ to prevent simultaneous,attempts to update the same virtual display.dd\ &C21Wb%EXPTOOCOM, expression is too complexnt Facility;The expression is too complex for the TERMTABLE compiler toparse.1Modify the expression so that it is less complex.eebET1MXINVEXP, invalid expressionnt Facility8The TERMTABLE compiler encountered an invalid arithmetic expression.>Make sure that you have used only valid operators and operandsin your expressions.SDA attempts to read the1fq4OPNOTSUP, operation is not supported on this devicent Facility4The terminal hardware does not support the requested operation.=Run the application on a terminal that supports this feature.$o'61Xc6&TABID_MIS, terminal table ID mismatchnt Facility=The TERMTABLE internal consistency check failed. The routines>that fetch information from TERMTABLE have a different versionnumber than the TERMTABLE data.5Recompile TERMTABLE.TXT to update your TERMTABLE.EXE.o"Ky1S^"!UNRECSTA, unrecognized statementnt Facility;The TERMTABLE compiler encountered a statement that it doesnot recognize.:Check your definition. Make sure you have spelled keywords=correctly and that statements appear only in valid sequences.w{%Z1Va$NOTNUMCAP, not a numeric capabilitynt Facility=The TERMTABLE compiler expected a numeric capability name butencountered something else.;Check your terminal definition. The numeric capability name=may have been misspelled, or another statement such as STRING=or BOOLEAN may have been omitted, which would have terminatednumeric capabilities. ,QN1]h+FAIOPEFIL, failed to open file 'file-name'nt Facility=The TERMTABLE compiler could not open the file specified in aREQUIRE statement.:Make sure that the specified file exists and that you haveread access to it.P<`1mxb;NOTPASTED, given display is not pasted to given pasteboardnt Facility;An attempt is made to unpaste or move a display that is not#pasted to the specified pasteboard.;Check that you are referencing the correct virtual display.9Verify that you have not unpasted the display or that youforgot to paste it.  "1Q\~INVKBD_ID, invalid keyboard-idnt Facility!An invalid keyboard ID is passed.>Make sure you are passing the keyboard ID by reference, not byby value. Ensure that the key table ID is previously set up bya call to SMG$CREATE_KEY_TABLE. 4w1ep3NOTRMSOUT, RMS is not being used to perform outputnt Facility9SMG$SNAPSHOT is called for a pasteboard associated with a?IVADDID, system # 'id-number' can not be added to the display.tilityNote that the system ID number must match the ID number in the=SYS_ID field and that it must be entered in the same radix as=that of the SYS_ID field. For more information about changing6the radix of a field, enter the HELP SET field/FORMAT.to the display. If the system ID is correct, be sure to removeselected report, so it cannot be added to the report. However,(the name is valid in a different report.>Select a different report or enter the HELP CLASSES command to get a list of available classes...:=>1ouML=IVADDNODE, node 'node-name' can not be added to the display.tility>Information for the system identified by the node name entered=is not available, or the node name entered is not the name of;a node previously removed from the display using the REMOVESYSTEM/NODE=node-name command.to the display. If the node name is correct, be sure to removeSHOW CLUSTER command is invoked with the /BEGINNING=beginning->time qualifier. The message indicates that the current process+will be suspended until the time indicated.None.::MB, Symbiont/Queue-".E1Sm!INVSTMNBR, invalid stream numberManager Interface Facility>3-1P[INVSTANAM, invalid state nament Facility2The length of the specified state name is invalid.,Choose a state name with 1 to 31 characters.?? "<1S^0!NOMOREKEYS, no more keys definednt Facility9When called repeatedly, SMG$LIST_KEY_DEFS returns all the6key definitions in a key table. When there are no more$definitions, this error is returned.;Modify your program to expect this condition, if necessary.@@ d 1GRSYNERR, syntax errornt Facility6The TERMTABLE compiler encountered invalid syntax (for,example, a misplaced or missing equal sign).Check your terminal definition.AAs 251cnP1WILUSERMS, output will be performed by RMS laternt Facility:Normally, the screen is updated at the end of every outputor an unknown terminal, then this message is given at the time*output would have been sent to the screen.4Use the SMG$SNAPSHOT routine to receive your output.BB  k]1KVINVARG, invalid argumentnt Facility>Either your program specified an invalid argument or the value+of an argument is not in the correct range.:Correct the program to specify a valid argument or a value!that is within the correct range.CC &\L1Wb %DIALINNOT, diagonal line not allowednt Facility=The vertices specified will result in a diagonal, rather thanvertical or horizontal, line.The TERMTABLE compiler needs an END statement to terminate thecurrent terminal definition. Check your terminal definitions.NN! <{@1mx3;MISFILSPE, missing file specification in REQUIRE statementnt Facility:The REQUIRE statement needs a file name in order to locate4external definitions that should become part of your TERMTABLE.0Add a file name to the REQUIRE statement in yourTERMTABLE.TXT.OO!%1Va$MISNAMREQ, expected NAME or REQUIREnt Facility;The TERMTABLE compiler expected TERMTABLE.TXT to begin withThe requested terminal definition is not found in the caller's2private copy of TERMTABLE or the system TERMTABLE.:If you intended to use a private terminal definition, make8sure that TERMTABLE.EXE exists in your private directory:and that the logical name TERM$TABLOC points to it. If you=expected your terminal to be defined in the system TERMTABLE,check with your system manager.RR#)T1u5AUNDTERNOP, undefined terminal - couldn't access private terminal tablent Facility8The requested terminal definition is not in the caller's6private copy of TERMTABLE or the system TERMTABLE. The=caller's private TERMTABLE cannot be accessed, either because6it does not exist or because RMS cannot open the file.9To use a private definition, make sure that TERMTABLE.EXE:exists in your private directory and that the logical name=TERM$TABLOC points to it. Make sure that you have read access to the file.SS*S}1@UNDTERNOS, undefined terminal - couldn't access system terminal tablent Facility8The requested terminal definition is not in the caller's5private TERMTABLE or the system TERMTABLE. The systemTERMTABLE is unavailable.=The system TERMTABLE should be mapped as a global section and>therefore should always be available. See your system manager.TT+ &-_1Wb%ILLVAL, Boolean value must be 0 or 1nt Facility,A Boolean capability has an incorrect value.=Check your terminal definitions. Boolean capabilities must be 0 or 1: on or off, respectively.UU+(P1Yd'PRISECMAP, private terminal table usednt FacilityThe system program that maps TERMTABLE.EXE as a global sectionis unsuccessful.=If there is already an existing global section for TERMTABLE,>the system manager must reboot the system in order to create anew global section.ZZ9 '1Xc&GBLSECMAP, system terminal table usednt Facility8The requested terminal definition is found in the system:TERMTABLE. The requested terminal definition did not exist"in the caller's private TERMTABLE.None.[[<}?1ITINVCOL, invalid columnnt Facility8An invalid column number is specified. It is either less:than 0 or larger than the number of columns in the virtualdisplay.>Specify a valid column. Columns are numbered beginning with 1.\\=$RP1U`#INVCOLARG, unknown color specifiednt FacilityMake sure you are passing the display identifier by reference,=not by value. Ensure that the display ID is previously set up(by a call to SMG$CREATE_VIRTUAL_DISPLAY.ccY 6d1gr95DSPIN_USE, operation invalid while display is activent Facility>The attempted operation is illegal while output to the virtual;display is active. For example, you cannot output text to a=display in an AST routine that interrupts an SMG$ call on the same display.6Synchronize your calls to SMG$ to prevent simultaneous,attempts to update the same virtual display.dd\ &C21Wb%EXPTOOCOM, expression is too complexnt Facility;The expression is too complex for the TERMTABLE compiler toparse.1Modify the expression so that it is less complex.eebET1MXINVEXP, invalid expressionnt Facility8The TERMTABLE compiler encountered an invalid arithmetic expression.>Make sure that you have used only valid operators and operandsin your expressions.SDA attempts to read theExamine the contents of SYS$SYSTEM:VMS$RESERVED_MEMORY.DATA to;confirm the name and UIC group of the record to be deleted.66(1g{'5RMRVERMIS, reserved memory registry version mismatchnt Integrator/Server=There is a mismatch between the version marker in the current:incarnation of SYS$SYSTEM:VMS$RESERVED_MEMORY.DATA and the2version expected by the executing SMISERVER image.Rename the existing version of7SYS$SYSTEM:VMS$RESERVED_MEMORY.DATA and use the current0version of SYSMAN to create a new registry file.6.'7(91h|@6BUFOVR, internal error - Packet has overflowed buffernt Integrator/Server8The packetizer produced a buffer larger than 4096 bytes.1h|6NOCSP, no SMI thread in remote Cluster Server Processnt Integrator/Server5A remote SYSMAN command could not be delivered to the6SMISERVER process in the indicated node for one of thefollowing reasons:9o The remote system is running a version of the operating$ system lower than VMS Version 5.0.1o The CLUSTER_SERVER process on the remote system7 stopped, aborted, or is not yet started during system initialization.=Determine the reason for the failure and correct the problem. 6> :(\21k 9IMGNOTFND, Image 'image' not found for product 'product'nt Integrator/Server;The specified image file is not found in the loadable imagedatabase for the given product.1Specify a product name contained in the database. 6GB?(?1pY>NOOPER, OPER privilege required on all nodes, access rejectednt Integrator/Server9OPER privilege is required to run SYSMAN. If any nonlocal>environment is used, OPER privilege must also be authorized inthe UAF on each remote node.>Correct the authorized privileges in the associated UAF files.6B@(1q?PROTMIS, server and host not running same SMI protocol versionnt Integrator/Server:Incompatible versions of SYSMAN and SMISERVER exist in the8environment. Operation continues on the next node in the environment.=Ensure that all nodes participating in a SYSMAN operation are>running compatible versions of the OpenVMS operating system orSMISERVER, or both.6mC7(a1h|6REQDITEMMISS, required item not in item list for callnt Integrator/Server5This message indicates an internal error. An SMI callThis message indicates an internal error. SMI is attempting to7use a remote link without sending an initialize packet.=Record all SYSMAN commands leading to this error, and contactHP Customer Support.6G-(K1^r,CANCEL, remote operation has been cancellednt Integrator/Server:The user pressed Ctrl/C to cancel a command entered at theSYSMAN> prompt.None.6K;(1lU:SLOWRESP, system failed to respond within one-half secondnt Integrator/Server=A clusterwide CONFIGURATION SET TIME command was entered, and:one of the OpenVMS Cluster members took longer than half a=second to respond. The time is set and the operation procededwith the next cluster member.>Verify that the time was set within acceptable tolerances with=a SYSMAN CONFIGURATION SHOW TIME command, and reenter the SETTIME command if desired.6hN D(H1u2zCDQCLUS, device is mounted clusterwide, CLUSTER environment ignorednt Integrator/Server8Disk quota functions are already operating in an OpenVMSDo not specify the /CLUSTER qualifier with the SET ENVIRONMENTcommand.6N'(T1Xl&UNKOBJECT, unknown object in SMI callnt Integrator/Server=This message indicates an internal error. The server does notrecognize the object.8Ensure that all the nodes in the environment contain the3NOT_IMPL, function not implemented for this objectnt Integrator/Server7This message indicates an internal error. The requested)function of an SMI object is not defined.;Record the exact sequence of SYSMAN commands leading to the&error and contact HP Customer Support.6y0(I1au/ALFNOMATCH, no records matched search criteriant Integrator/Server;No records in the ALF database match the search criteria of the command.None.6u3(Q1dx62BADPKT, internal error - Remote packet format badnt Integrator/Server:The packet received by SMISERVER is invalid for one of thefollowing reasons:!o The packet format is too short..o The object or function code is out of range.o The originator PID is 0.>Note the SYSMAN commands that led to this error and contact HPCustomer Support.6 6(A_1g{5NORTTB, internal error - No routine table for objectnt Integrator/Server=An object is defined in server tables, but the entry point is0.=If possible, record all SYSMAN commands leading to this error and contact HP Customer Support.6E(U1PdWSDPRNOTREM, no record removednt Integrator/Servercorrupted, and BUGCHECK will ignore this in-memory copy duringa system crash.8Try to reload the in-memory copy by executing the SYSMANUse the SYSMAN command DUMP_PRIORITY LOAD to load the registry7into memory; then retry the DUMP_PRIORITY SHOW command.65(Q 1fz4SDPRFMTERR, system dump priority registry corruptednt Integrator/Server:The System Dump Priority registry file format sanity checkdetected corruptions.=Rename the corrupted registry file using a command similar tothe following:1 $ RENAME SYS$SYSTEM:SYS$DUMP_PRIORITY.DAT *.OLDPRIORITY ADD commands, or restore the registry contents from a backup copy.66"(>1SgH!RIGHTSLIM, Rights limit exceedednt Integrator/Server=A SYSMAN user with more than 125 rights identifiers attempted7to issue a SYSMAN command to a remote node. This rights;limitation includes a minimum of three identifiers that are9granted at login when the process rights list is created:7a UIC identifier, a system identifier, and at least oneenvironmental identifier.8Run SYSMAN from another account with 125 or fewer rights>identifiers or reduce the number of identifiers on the current*account to fall within the required range. 62(1cwP-1SDPRFNF, system dump priority registry not foundnt Integrator/Server/The System Dump Priority on-disk registry file,possible, remove the incorrect record, rename the file back to0its original name, and retry the load operation.""61(1bvw'0NOSERVER, SMI Server not running in target nodent Integrator/Server6Process SMISERVER is not running in the indicated nodebecause:1o It may have been stopped with the STOP command.o It may have been aborted.8o The remote system has not progressed far enough in the5 system startup procedure to have started SMISERVER.5Determine why SMISERVER is not running. Restart it if8necessary with the following command run from the SYSTEMaccount on the target system:! $ @SYS$SYSTEM:STARTUP SMISERVER##6#(_*1Th"SDPRINVPROC, invalid process nament Integrator/Server9The System Dump Priority on-disk registry file contains a$record with an invalid process name.;Make a copy of the registry file using a command similar tothe following:/ $ COPY SYS$SYSTEM:SYS$DUMP_PRIORITY.DAT *.OLDpossible, correct the invalid UIC, rename the file back to its'original name, and retry the operation.&&6j.(t1_s|-BADACTRL, remote access control info invalidnt Integrator/Server=The SYSMAN user cannot be validated on the indicated node due(to one or more of the following reasons:o The password is invalid.:o The user name (current or as overridden with a /USERNAME6 qualifier) cannot be found in the remote system UAF.+o The remote system UAF cannot be accessed.;o The remote UAF record does not have either SETPRV or OPER privilege authorized.o The account is disabled.Use the SYSMAN command DUMP_PRIORITY LIST to get a list of the;entries in the System Dump Priority on-disk registry. Retry,the MODIFY command specifying a valid entry.))6Z<(vu1ml;TOOMANNOD, too many nodes in node list - must be shortenednt Integrator/ServerRecord the SYSMAN commands leading to the error and contact HPCustomer Support.--6[2(X1cwm1BADDIR, bad directory spec - should be dev:[dir]nt Integrator/Server9A SYSMAN SET PROFILE/DEFAULT command specified an invaliddevice or directory, or both.5Correct the directory specification to use the format;shown in the message. For more information about specifying+directories, see the OpenVMS User's Manual...6+(1\p*NOMEMBER, specified node has left clusternt Integrator/ServerThe user issued a RESERVED_MEMORY ADD, REMOVE, or LIST command0in a SYSMAN environment that includes VAX nodes.responding to hardware clock interrupts by analyzing the crash>dump generated by this bugcheck. Further analysis of the crash=dump might show the reason why that CPU was not responding tocurrent processor. The multiprocessor system could deadlock if3spin locks are allowed to be acquired out of order.9Analyze the crash dump, and determine which lock is being;acquired and which locks are already owned by the acquiring=processor. Correct your code so the locks are acquired in thecorrect order.9One probable situation that can occur is when a processorthan unconditionally releasing it as might have been intended.;This leaves the spin lock still owned by this processor. If=the processor subsequently attempts to acquire a lower-ranked=spin lock while still owning the previous lock, the operating>system prevents a potential deadlock by issuing this bugcheck.=Correct the driver code to prevent this or similar situationsfrom occurring.>Note that this bugcheck applies only to static spin locks, notAnalyze the crash dump and determine the code sequence that is>trying to acquire the spin lock from the excessively high IPL.>It might be, for instance, a case where driver code previously8raised the IPL to accomplish something else, then failed:to lower the IPL again prior to acquiring the lock that issynchronized by the lower IPL.;Note that under no circumstances can a driver lower the IPL9below that level from which it originally raised the IPL,-unless it does so by creating a fork process.556q;1lvG&:SPLIPLLOW, IPL has fallen below level of owned spin locksprocessing6A processor is attempting to release a spin lock while5executing at an IPL that is below the synchronization9IPL associated with that spin lock, indicating that local)processor synchronization is compromised.9Analyze the crash dump and determine the point where yourThe following situation is one that would cause this bugcheck.5A processor, while executing a driver, might build up7multiple, nested acquisitions of this spin lock through>calling several levels of subroutine, each acquiring ownership>of the spin lock. If one of the called subroutines incorrectly9executes an unconditional release of this spin lock, then:a caller of that subroutine tries to release the spin lockThe following situation is one that would cause this bugcheck.5A processor, while executing a driver, might build up7multiple, nested acquisitions of this spin lock through>calling several levels of subroutine, each acquiring ownership>of the spin lock. If one of the called subroutines incorrectly;executes an unconditional release of this spin lock, then a;caller of that subroutine will try to release the spin lockThis message is output by the START/CPU, STOP/CPU, or SHOW CPU&command in one of the following cases:4o Case 1: A START/CPU, STOP/CPU, or SHOW CPU command8 which specified one or more CPU IDs not present in the configuration.1o Case 2: The command was entered on a single CPU6 configuration or on a CPU type that does not support multiprocessing operation.:o Case 3: A START/CPU or STOP/CPU command was entered on a; multiprocessor configuration in which multiprocessing has= been disabled through the MULTIPROCESSING SYSGEN parameter.)The action to take for each case follows::o Case 1: Enter the SHOW CPU command to determine what CPU8 IDs are present in the configuration, then reenter the: failed command, specifying the correct CPUs and omitting the CPUs not present.8o Case 2: None. This command is not useful on such CPUs.7o Case 3: Reset this parameter and reboot the system to" enable multiprocessor operation.996iORT, Sort/Merge UtiR1Lh?WORK_DEV, work file 'file-spec' must be on random-access local devicelity;Work files must be specified for random-access devices that9are local to the CPU on which the sort is being performed<(that is, not on a node in a network). Random-access devicesare disk devices.Specify the correct device.::6&*r!1[_)UNDOPTION, undefined option flag was setlity:Only those option flags used by SORT/MERGE can be set. All6other bits in the longword are reserved and must be 0. Correct your specification file.;;6*8!31im7MISS_PARAM, a required subroutine parameter is missinglity A required argument was omitted.2Identify which argument is missing and specify it.<<633~1dh2LRL_MISS, longest record length must be specifiedlity9If a record I/O interface subroutine package is selected,=the longest record length (LRL) must be passed to SORT in thecall.Specify the LRL.==67$5)1UY#BAD_KEY, invalid key specificationlity>The key field size, position, data type, or order is incorrect=within the key definition. Positions start at 1 and cannot be>greater than the maximum record size. Record size must be less=than or equal to 32,767 for character data; 1, 2, 4, 8, or 16:for binary data; and less than or equal to 31 for decimal.(Check the command string key specifiers.>>6YNU.1=kCBAD_LRL, record length ('n') greater than specified longest record lengthlity;In reading the input file, SORT encountered a record longer:than the specified LRL (longest record length specified in;bytes). The record will be truncated to the LRL and sorted.-Reexecute the SORT command with a longer LRL.??6[D>31uyCSPCIVC, invalid collating sequence specification, at line 'number'lity=The syntax specified for the collating sequence is incorrect.2Correct the syntax and reenter your specification.@@6\-q&1^b,SPCIVD, invalid data type, at line 'number'lity6In the specification file text, a data type either was9incorrectly specified or is not recognized by SORT/MERGE.%Correct your specification file text.AA6];S&1lp:SPCIVF, invalid field specification, at the line 'number'lity;The text in the /FIELD clause in the specification file wasincorrectly specified.%Correct your specification file text.BB6^AC&1rv@SPCIVI, invalid include or omit specification, at line 'number'lity7The text in an /OMIT or /INCLUDE clause was incorrectly specified.%Correct your specification file text.CC6_=@&1nrSRTIWA, insufficient space; specification file is too complexlitySimplify the specification file text by reducing, for example,the number of /FIELD clauses.NN6L 1T1bf^0IND_OVR, indexed output file must already existlityFirst create the indexed file with the RMS Define utility. The>primary key of the file should be the same as the sort key for%efficiency, but this is not required.OO6 4K21ei3DUP_OUTPUT, output file has already been specifiedlity:The output file argument in the routine package was passedmore than once.1Make sure the output file is specified only once.PP6Ul;11>STABLEEXC, equal-key routine and stable option cannot both be specifiedlity:Both an equal-key routine and the SOR$M_STABLE option were0specified when only one or the other is allowed.:Specify either the equal-key routine or the stable option.QQ6 +&U1\`*INP_FILES, too many input files specifiedlity%More than 10 input files were listed.;Reduce the number of input files or combine them so that nomore than 10 are listed.lid arithmetic expression.>Make sure that you have used only valid operators and operandsin your expressions.SDA attempts to read theSORT/MERGE detected decimal data that contains an invalid signSpecify each key parameter only once. For multiple keys, use a/KEY qualifier for each key.uL>K1os^=KEYED, mismatch between sort/merge keys and primary file keylity>An empty indexed file was created with a primary key that doesSpecify the correct key field size. The size must be less thanOne of the following sort type codes was passed to the routinepackage:+o Less than 1 or greater than 4 if file I/Oo Not equal to 1 if record I/O(o An invalid keyword in command /PROCESSNOOPER, OPER privilege required on all nodes, access rejectednt Integrator/Server9OPER privilege is required to run SYSMAN. If any nonlocal>environment is used, OPER privilege must also be authorized inthe UAF on each remote node.>Correct the authorized privileges in the associated UAF files.6B@(1q?PROTMIS, server and host not running same SMI protocol versionnt Integrator/Server:Incompatible versions of SYSMAN and SMISERVER exist in the8environment. Operation continues on the next node in the environment.=Ensure that all nodes participating in a SYSMAN operation are>running compatible versions of the OpenVMS operating system orSMISERVER, or both.6mC7(a1h|6REQDITEMMISS, required item not in item list for callnt Integrator/Server5This message indicates an internal error. An SMI callThis message indicates an internal error. SMI is attempting to7use a remote link without sending an initialize packet.=Record all SYSMAN commands leading to this error, and contactHP Customer Support.6G-(K1^r,CANCEL, remote operation has been cancellednt Integrator/Server:The user pressed Ctrl/C to cancel a command entered at theSYSMAN> prompt.None.6K;(1lU:SLOWRESP, system failed to respond within one-half secondnt Integrator/Server=A clusterwide CONFIGURATION SET TIME command was entered, and:one of the OpenVMS Cluster members took longer than half a=second to respond. The time is set and the operation procededwith the next cluster member.>Verify that the time was set within acceptable tolerances with=a SYSMAN CONFIGURATION SHOW TIME command, and reenter the SETTIME command if desired.6hN D(H1u2zCDQCLUS, device is mounted clusterwide, CLUSTER environment ignorednt Integrator/Server8Disk quota functions are already operating in an OpenVMSDo not specify the /CLUSTER qualifier with the SET ENVIRONMENTcommand.6N'(T1Xl&UNKOBJECT, unknown object in SMI callnt Integrator/Server=This message indicates an internal error. The server does notrecognize the object.8Ensure that all the nodes in the environment contain the3NOT_IMPL, function not implemented for this objectnt Integrator/Server7This message indicates an internal error. The requested)function of an SMI object is not defined.;Record the exact sequence of SYSMAN commands leading to the&error and contact HP Customer Support.6y0(I1au/ALFNOMATCH, no records matched search criteriant Integrator/Server;No records in the ALF database match the search criteria of the command.None.6u3(Q1dx62BADPKT, internal error - Remote packet format badnt Integrator/Server:The packet received by SMISERVER is invalid for one of thefollowing reasons:!o The packet format is too short..o The object or function code is out of range.o The originator PID is 0.>Note the SYSMAN commands that led to this error and contact HPCustomer Support.6 6(A_1g{5NORTTB, internal error - No routine table for objectnt Integrator/Server=An object is defined in server tables, but the entry point is0.=If possible, record all SYSMAN commands leading to this error and contact HP Customer Support.6E(U1PdWSDPRNOTREM, no record removednt Integrator/Servercorrupted, and BUGCHECK will ignore this in-memory copy duringa system crash.8Try to reload the in-memory copy by executing the SYSMANUse the SYSMAN command DUMP_PRIORITY LOAD to load the registry7into memory; then retry the DUMP_PRIORITY SHOW command.65(Q 1fz4SDPRFMTERR, system dump priority registry corruptednt Integrator/Server:The System Dump Priority registry file format sanity checkdetected corruptions.=Rename the corrupted registry file using a command similar tothe following:1 $ RENAME SYS$SYSTEM:SYS$DUMP_PRIORITY.DAT *.OLDPRIORITY ADD commands, or restore the registry contents from a backup copy.66"(>1SgH!RIGHTSLIM, Rights limit exceedednt Integrator/Server=A SYSMAN user with more than 125 rights identifiers attempted7to issue a SYSMAN command to a remote node. This rights;limitation includes a minimum of three identifiers that are9granted at login when the process rights list is created:7a UIC identifier, a system identifier, and at least oneenvironmental identifier.8Run SYSMAN from another account with 125 or fewer rights>identifiers or reduce the number of identifiers on the current*account to fall within the required range. 62(1cwP-1SDPRFNF, system dump priority registry not foundnt Integrator/Server/The System Dump Priority on-disk registry file,possible, remove the incorrect record, rename the file back to0its original name, and retry the load operation.""61(1bvw'0NOSERVER, SMI Server not running in target nodent Integrator/Server6Process SMISERVER is not running in the indicated nodebecause:1o It may have been stopped with the STOP command.o It may have been aborted.8o The remote system has not progressed far enough in the5 system startup procedure to have started SMISERVER.5Determine why SMISERVER is not running. Restart it if8necessary with the following command run from the SYSTEMaccount on the target system:! $ @SYS$SYSTEM:STARTUP SMISERVER##6#(_*1Th"SDPRINVPROC, invalid process nament Integrator/Server9The System Dump Priority on-disk registry file contains a$record with an invalid process name.;Make a copy of the registry file using a command similar tothe following:/ $ COPY SYS$SYSTEM:SYS$DUMP_PRIORITY.DAT *.OLDpossible, correct the invalid UIC, rename the file back to its'original name, and retry the operation.&&6j.(t1_s|-BADACTRL, remote access control info invalidnt Integrator/Server=The SYSMAN user cannot be validated on the indicated node due(to one or more of the following reasons:o The password is invalid.:o The user name (current or as overridden with a /USERNAME6 qualifier) cannot be found in the remote system UAF.+o The remote system UAF cannot be accessed.;o The remote UAF record does not have either SETPRV or OPER privilege authorized.o The account is disabled.Use the SYSMAN command DUMP_PRIORITY LIST to get a list of the;entries in the System Dump Priority on-disk registry. Retry,the MODIFY command specifying a valid entry.))6Z<(vu1ml;TOOMANNOD, too many nodes in node list - must be shortenednt Integrator/ServerRecord the SYSMAN commands leading to the error and contact HPCustomer Support.--6[2(X1cwm1BADDIR, bad directory spec - should be dev:[dir]nt Integrator/Server9A SYSMAN SET PROFILE/DEFAULT command specified an invaliddevice or directory, or both.5Correct the directory specification to use the format;shown in the message. For more information about specifying+directories, see the OpenVMS User's Manual...6+(1\p*NOMEMBER, specified node has left clusternt Integrator/ServerThe user issued a RESERVED_MEMORY ADD, REMOVE, or LIST command0in a SYSMAN environment that includes VAX nodes.responding to hardware clock interrupts by analyzing the crash>dump generated by this bugcheck. Further analysis of the crash=dump might show the reason why that CPU was not responding tocurrent processor. The multiprocessor system could deadlock if3spin locks are allowed to be acquired out of order.9Analyze the crash dump, and determine which lock is being;acquired and which locks are already owned by the acquiring=processor. Correct your code so the locks are acquired in thecorrect order.9One probable situation that can occur is when a processorthan unconditionally releasing it as might have been intended.;This leaves the spin lock still owned by this processor. If=the processor subsequently attempts to acquire a lower-ranked=spin lock while still owning the previous lock, the operating>system prevents a potential deadlock by issuing this bugcheck.=Correct the driver code to prevent this or similar situationsfrom occurring.>Note that this bugcheck applies only to static spin locks, notAnalyze the crash dump and determine the code sequence that is>trying to acquire the spin lock from the excessively high IPL.>It might be, for instance, a case where driver code previously8raised the IPL to accomplish something else, then failed:to lower the IPL again prior to acquiring the lock that issynchronized by the lower IPL.;Note that under no circumstances can a driver lower the IPL9below that level from which it originally raised the IPL,-unless it does so by creating a fork process.556q;1lvG&:SPLIPLLOW, IPL has fallen below level of owned spin locksprocessing6A processor is attempting to release a spin lock while5executing at an IPL that is below the synchronization9IPL associated with that spin lock, indicating that local)processor synchronization is compromised.9Analyze the crash dump and determine the point where yourThe following situation is one that would cause this bugcheck.5A processor, while executing a driver, might build up7multiple, nested acquisitions of this spin lock through>calling several levels of subroutine, each acquiring ownership>of the spin lock. If one of the called subroutines incorrectly9executes an unconditional release of this spin lock, then:a caller of that subroutine tries to release the spin lockThe following situation is one that would cause this bugcheck.5A processor, while executing a driver, might build up7multiple, nested acquisitions of this spin lock through>calling several levels of subroutine, each acquiring ownership>of the spin lock. If one of the called subroutines incorrectly;executes an unconditional release of this spin lock, then a;caller of that subroutine will try to release the spin lockThis message is output by the START/CPU, STOP/CPU, or SHOW CPU&command in one of the following cases:4o Case 1: A START/CPU, STOP/CPU, or SHOW CPU command8 which specified one or more CPU IDs not present in the configuration.1o Case 2: The command was entered on a single CPU6 configuration or on a CPU type that does not support multiprocessing operation.:o Case 3: A START/CPU or STOP/CPU command was entered on a; multiprocessor configuration in which multiprocessing has= been disabled through the MULTIPROCESSING SYSGEN parameter.)The action to take for each case follows::o Case 1: Enter the SHOW CPU command to determine what CPU8 IDs are present in the configuration, then reenter the: failed command, specifying the correct CPUs and omitting the CPUs not present.8o Case 2: None. This command is not useful on such CPUs.7o Case 3: Reset this parameter and reboot the system to" enable multiprocessor operation.996iORT, Sort/Merge UtiR1Lh?WORK_DEV, work file 'file-spec' must be on random-access local devicelity;Work files must be specified for random-access devices that9are local to the CPU on which the sort is being performed<(that is, not on a node in a network). Random-access devicesare disk devices.Specify the correct device.::6&*r!1[_)UNDOPTION, undefined option flag was setlity:Only those option flags used by SORT/MERGE can be set. All6other bits in the longword are reserved and must be 0. Correct your specification file.;;6*8!31im7MISS_PARAM, a required subroutine parameter is missinglity A required argument was omitted.2Identify which argument is missing and specify it.<<633~1dh2LRL_MISS, longest record length must be specifiedlity9If a record I/O interface subroutine package is selected,=the longest record length (LRL) must be passed to SORT in thecall.Specify the LRL.==67$5)1UY#BAD_KEY, invalid key specificationlity>The key field size, position, data type, or order is incorrect=within the key definition. Positions start at 1 and cannot be>greater than the maximum record size. Record size must be less=than or equal to 32,767 for character data; 1, 2, 4, 8, or 16:for binary data; and less than or equal to 31 for decimal.(Check the command string key specifiers.>>6YNU.1=kCBAD_LRL, record length ('n') greater than specified longest record lengthlity;In reading the input file, SORT encountered a record longer:than the specified LRL (longest record length specified in;bytes). The record will be truncated to the LRL and sorted.-Reexecute the SORT command with a longer LRL.??6[D>31uyCSPCIVC, invalid collating sequence specification, at line 'number'lity=The syntax specified for the collating sequence is incorrect.2Correct the syntax and reenter your specification.@@6\-q&1^b,SPCIVD, invalid data type, at line 'number'lity6In the specification file text, a data type either was9incorrectly specified or is not recognized by SORT/MERGE.%Correct your specification file text.AA6];S&1lp:SPCIVF, invalid field specification, at the line 'number'lity;The text in the /FIELD clause in the specification file wasincorrectly specified.%Correct your specification file text.BB6^AC&1rv@SPCIVI, invalid include or omit specification, at line 'number'lity7The text in an /OMIT or /INCLUDE clause was incorrectly specified.%Correct your specification file text.CC6_=@&1nrSRTIWA, insufficient space; specification file is too complexlitySimplify the specification file text by reducing, for example,the number of /FIELD clauses.NN6L 1T1bf^0IND_OVR, indexed output file must already existlityFirst create the indexed file with the RMS Define utility. The>primary key of the file should be the same as the sort key for%efficiency, but this is not required.OO6 4K21ei3DUP_OUTPUT, output file has already been specifiedlity:The output file argument in the routine package was passedmore than once.1Make sure the output file is specified only once.PP6Ul;11>STABLEEXC, equal-key routine and stable option cannot both be specifiedlity:Both an equal-key routine and the SOR$M_STABLE option were0specified when only one or the other is allowed.:Specify either the equal-key routine or the stable option.QQ6 +&U1\`*INP_FILES, too many input files specifiedlity%More than 10 input files were listed.;Reduce the number of input files or combine them so that nomore than 10 are listed.lid arithmetic expression.>Make sure that you have used only valid operators and operandsin your expressions.SDA attempts to read theA newly discovered device that fits all the serving parameters5could not be served. If the value in the R0 status is900000084, the device was not served because the server is not loaded.;Check to see that the MSCP server has been loaded properly.:Use the SHOW DEVICE/SERVED command or examine SCS$GL_MSCP.>This global address should be a valid system space address. If=the R0 status is other than 84, get the corresponding message;(using EXIT nn) and find out what is wrong with the device. ('1Yl! 'ERROR_HALT, failed to load MSCP servere Configure Processreasonable. Also check MSCP_BUFFER to make sure that the value2is not too large compared to the value in NPAGDYN.0'1at'/NOCLUDEV, server not loaded, no cluster devicee Configure Process=No port descriptor table was found on this node. Either there8is no CI or NI adapter on this node, or the port drivers;corresponding to either of the devices has not been loaded.>Make sure the node you are loading the server on is configured=so that it can participate in an OpenVMS Cluster environment.;If it does not have either an Ethernet or a CI adapter, the>MSCP server cannot be loaded (set MSCP_LOAD to 0). If you have9one of these adapters, make sure the VAXCLUSTER parameter8is set to a nonzero value. If the node participates in a:local area OpenVMS Cluster environment, that NISCS_LOAD is set to 1. 1'1bu>0NOCLUSTER, server not loaded, SCS not availablee Configure Process;The SYSGEN parameters for this system request that the MSCP=server be loaded, but none of the underlying SCS services are=loaded. These SCS services are necessary for the operation ofthe MSCP server.=Make sure the VAXCLUSTER parameter is set to a nonzero value,=or change the MSCP_LOAD parameter to 0, so that the server is not loaded.@ ';1#^ The processor vendor ID is 'vendor-id' and the product ID is 'product-id'.e Configure Process:An unsupported processor device was discovered on the bus.8If you are operating in a multihost SCSI OpenVMS Cluster5environment, remove the specified unsupported device.=ALLODIFF, The ALLOCLASS parameter value for the processor onA SCSI bus 'device-name', ID 'slot-number', is different from the value on this system.F This condition creates multiple names for the same device, which can lead to data corruption.e Configure Process7The value of the SYSGEN disk allocation class parameter=differs between the local node and the specified remote node.=Set the ALLOCLASS parameter to the same nonzero value on bothnodes.W'hE1 7ALLOZERO, This system and/or the processor on SCSI bus> 'device-name', ID 'slot-number', has a zero ALLOCLASS value.F This condition creates multiple names for the same device, which can lead to data corruption.e Configure Process:The local node, remote node, or both nodes have the SYSGEN,disk allocation class parameter set to zero.=Set the ALLOCLASS parameter to the same nonzero value on bothnodes. t'vJ15HDTAPEALLODIFFF, The TAPE_ALLOCLASS parameter value for the processorD on SCSI bus 'device-name', ID 'slot-number', is different from the value on this system.F This condition creates multiple names for the same device, which can lead to data corruption.e Configure Process7The value of the SYSGEN tape allocation class parameter=differs between the local node and the specified remote node.=Set the TAPE_ALLOCLASS parameter to the same nonzero value on both nodes. u'hK1&;TAPEALLOZERF, This system and/or the processor on SCSI busC 'device-name', ID 'slot-number', has a zero TAPE_ALLOCLASS value.F This condition creates multiple names for the same device, which can lead to data corruption.e Configure Process:The local node, remote node, or both nodes have the SYSGEN,tape allocation class parameter set to zero.>Set the TAPE_ALLOCLASS parameter to the same nonzero value for both nodes. {j'81'QIOCALLFAIL, QIO service call failure.A Unable to obtain inquiry data from one or more SCSI initiators.e Configure Process7The $QIOW system service did not complete successfully.Contact HP Customer Support. }m'S1!*QIOOPFAIL, QIO service operation failure.A Unable to obtain inquiry data from one or more SCSI initiators.e Configure Process;The operation requested by the $QIOW system service did notcomplete successfully.Contact HP Customer Support. 'QI1jDNOMATCH, The processor on SCSI bus 'device-name', ID 'slot-number',- is attached using controller 'device-name'.F This condition creates multiple names for the same device, which can lead to data corruption.e Configure Process7The local and remote nodes are attached to the SCSI busthrough unmatched ports.;Connect the nodes to the SCSI bus through matching ports on each system.RTUP, SYSMAN UtilEB'q1sANODEDISABLED, node 'node-name' is not currently enabled for fileity STARTUP Command=A STARTUP DISABLE action tried to disable a component file on2a node on which the component file is not enabled.None.F;'s1l:NODEENABLED, node 'node-name' is already enabled for fileity STARTUP Command=A STARTUP ENABLE action tried to enable a component file on a4node on which the component file is already enabled.None.s :'q1k~9DUPINVALID, file 'file-name' is already in STARTUP tableity STARTUP Command9An attempt is made to add a startup component file to the6component database, which already contains that entry.9Either use the STARTUP MODIFY FILE command at the SYSMAN>;prompt to change the existing entry, or reenter the commandwith a new component file name. \'+1>DBCORRUPT, component data file is corrupt - no terminator for parameter field.ity STARTUP Command*The startup component database is corrupt.;Verify that the file being used is a component database and;that the file has not been edited or otherwise modified. If>the problem still exists, preserve the component database file and contact HP Customer Support. #'q1Tg"FILEGONE, STARTUP file is missingity STARTUP Command=The current startup component database does not exist, or you2do not have read or write access to this database.;To create a new database, use the STARTUP CREATE command at=the SYSMAN> prompt. To select a different component database,;use the STARTUP SET DATABASE command at the SYSMAN> prompt.;If the database exists but you cannot access it, verify the8protection applied to the file (using the DIRECTORY/FULL;command), and change the protection if necessary (using the=SET PROTECTION command). If you cannot change the protection,=ask the system manager or the owner of the file to change the protection.-'>|1^q+,COMFILEMTY, STARTUP component file is emptyity STARTUP Command=The current startup component file does not have any entries.>Use the SYSMAN command STARTUP ADD FILE to add entries to thisA search for startup components running in a given phase foundno matching entries.5Reenter the command with a different /PHASE argument.ADRV, System Startu)}b1ZbA(BADFLAG, bad enable/disable flag 'flag'p Driver8The enable/disable flag describing how the list of nodes:associated with a startup component file should be used isinvalid. prompt to3correct either the file name or the execution mode.}GE<1v~SDOPENFAIL, failure opening component file 'file-number', 'file-name'p Driver>The startup driver failed to open one of the system files that=describes the tasks that need to be performed at startup. TheA file in the startup component database has an execution mode1that is not DIRECT, BATCH, CALLED, SPAWN, or ANY.8To correct the component execution mode, use the STARTUP*MODIFY FILE command at the SYSMAN> prompt. 01aiQ/FATALERR, fatal error reading startup databasep Driver9The startup driver encountered a fatal error while tryingA startup component file in the startup component database has%a file type that is not .COM or .EXE.>Use the SYSMAN command STARTUP MODIFY FILE to correct the filename.Df1u}UCTOOMANYSUB, SPAWN failed, too many subprocesses. DIRECT mode used.p Driver;The startup database directed the startup driver to run too7many spawned subprocesses. STDRV ran one or more of the:processes in the main startup procedure using DIRECT mode.(System startup should complete normally.7Use SYSMAN's STARTUP commands to display and modify the-startup database to spawn fewer subprocesses.J.a1_g\-NOSUCHFILE, file 'file-name' does not exist.p Driver:A startup component file specified in the startup database%does not exist during system startup.@STARTUP command procedure, verify that the first parameter is>FULL, MINIMUM, UPGRADE, or the name of the system component torestart. *,T1[c)BADFILE, invalid filename is 'file-name'p Driver+The startup component file name is invalid. prompt tocorrect the file name.!!hR, String Manipula" !!j1R_h ILLSTRCLA, illegal string classtion Facility>The class code found in the class field of a descriptor is not>a string class code supported by the OpenVMS Procedure Calling and Condition Handling Standard.9If you are programming in a high-level language and usingthat all string descriptors are initialized before using them.""# $!y1Ub<#ILLSTRPOS, illegal string positiontion Facility=Successful completion. However, one of the character-position=parameters to a string routine points to a character-position:that is either before the beginning of the input string or"after the end of the input string.>Ensure that any character-position parameter is greater than 09and less than or equal to the length of the input string.##$ )!1Zgg(ILLSTRSPE, illegal string specificationtion Facility9Successful completion, except that the character-position;parameters specifying a substring of a string parameter are:inconsistent because the ending character-position is less;than the starting character-position. A null string is usedfor the substring.4The applications program should verify that starting4character-positions are less than or equal to endingcharacter-positions.$$5 !fl1N[-DIVBY_ZER, division by zerotion Facility4The string arithmetic routines attempted to take the0reciprocal of a string whose numeric value is 0.=Ensure that any string used as a divisor is not a null string-or any other string whose numeric value is 0.%%L!N51N[INVDELIM, invalid delimitertion Facility;The delimiter string passed to STR$ELEMENT is longer than asingle character.4Examine the delim_dec argument and make corrections.&&O=!I-1n{A user who calls the String facility directly should check the>argument list in the call. High-level language programmers whoverify (when you finish using the storage) that the storage is>released by calling STR$FREE1_DX or LIB$FREE_VM, respectively.An attempt is made to place too many characters into a string.+The value is truncated on the right to fit.:Do not exceed the maximum string length. This error may be*ignored if right truncation is acceptable.//.!>1_l-NOMATCH, no match found against input stringtion Facility=No match is found for the input string passed to the routine.None.004 F!>1wFEERRFREDYN, error freeing dynamic string when returned to LIB$FREE_VMtion Facility9STR is unable to free space allocated to the string; this9usually occurs when a dynamic string descriptor points tostatic storage.=Begin debugging procedures to verify and correct the problem.11UBMIT, SUBMIT Comma.S/1_a-ADDFIL, error adding file 'file-name' to jobnd>The system encountered an error adding the specified file to abatch or print job..Take action based on the accompanying message.22('S!1:BREMOINSF, node name specification or /REMOTE missing from command linend7To print or submit a file residing on a remote node for6processing on that node, the /REMOTE qualifier must be4included in the PRINT or SUBMIT command and the fileThe indicated edit command is not in ascending sequence within9the update file. The editing operation has been performed correctly.5Edit the update file to place the edit in the correct position.<<DSLP1!1111SUM, SUMSLP Batch Editing Utility==YSBOOT, System Boot"-1GUqSYNTAX, syntax errorstrap FacilityA syntax error is detected.,Reenter the command with the correct syntax.>>3"@1dr2SETMAX, value set to maximum for parameter 'name'strap Facility6The value entered in a SET command exceeds the maximumallowed.Verify the intended number.??."H91_m-NOTASCII, parameter 'name' is not ASCII typestrap FacilityAttempt to reboot the system or try a different drive. If this4fails, obtain a new copy of the OpenVMS system disk.DD"71N\&SYSBOOT-E-Error reading filestrap Facility;An irrecoverable error occurred while SYSBOOT was reading a>parameter file in response to a USE command. The error messagecontains the file name.6Reenter the command, specifying the correct file name.EE!"G71R` SYSBOOT-E-I/O error reading filestrap Facility=An irrecoverable I/O error occurred while SYSBOOT was reading9a parameter file or a system loadable image. If the errora system loadable image was being read, SYSBOOT terminates thebootstrap operation.6Attempt to reboot the system or try a different drive.FF"e21P^SYSBOOT-E-Not a parameter filestrap Facility>A file specified in a USE command is not a parameter file. The%error message contains the file name.1Reenter the command, specifying a parameter file.GGZ" 1CSHADOWLBS, clearing low-order bit in SHADOWING; function no longer supportedstrap Facility>The low-order bit in the SYSGEN parameter SHADOWING was set at>boot time. This bit has been cleared and the system was booted=from the physical device named to VMB register 3 (R3). Unless>you have migrated to phase II volume shadowing, no shadow setswill be created.None.HH%(".1Yg 7'SYSBOOT-E-System version mismatch foundstrap Facility;The versions of the system loadable image being read do not8match the current OpenVMS operating system versions. The,images on your system disk are incompatible.-Obtain a new copy of the OpenVMS system disk.II "Hh1Q_SYSBOOT-E-Unable to locate filestrap FacilityThe hardware ECO level is below the level required for correctsoftware operation.Contact HP Customer Support.LL "1N\SYSBOOT-F-Invalid console IDstrap Facilitynonpaged dynamic pool, interrupt stack, and resident executiveoverwrites the CI microcode.The hardware ECO level is below the level required for correctsoftware operation.Contact HP Customer Support.TT(-"1^l,SYSBOOT-F-Unable to allocate physical memorystrap Facility=The sum of pages required for the system page table, nonpaged=dynamic pool, interrupt stack, and resident executive exceedsavailable physical memory.SYSBOOT cannot find enough contiguous pages of physical memory8to contain the required system page table (SPT), process-header (PHD), and system control block (SCB).5Reduce the value of parameters that control SPT size:8VIRTUALPAGECNT (VAX only), BALSETCNT, REALTIME_SPTS, andSPTREQ.WW +0".1ao2/SYSBOOT-F-Unable to locate storage bit map filestrap Facility:SYSBOOT cannot locate the storage bitmap file (BITMAP.SYS)volume when booting the OpenVMS operating system from multiplevolumes.=Attempt to reboot the system; try a different drive or obtain&a new copy of the OpenVMS system disk.ZZ."^1P^SYSBOOT-F-Unexpected exceptionstrap Facility6An unexpected exception occurred indicating a probable&hardware error or SYSBOOT logic error.Contact HP Customer Support.[[/#"b1Tb"SYSBOOT-F-Unexpected machine checkstrap Facility:An unexpected machine check occurred indicating a probable&hardware error or SYSBOOT logic error.Contact HP Customer Support.\\0"1M[SYSBOOT-F-Unknown processorstrap Facility=The processor type code in the system identification register6does not correspond to any supported model of a VAX-11 processor.Contact HP Customer Support.wed.:Specify either the equal-key routine or the stable option.QQ6 +&U1\`*INP_FILES, too many input files specifiedlity%More than 10 input files were listed.;Reduce the number of input files or combine them so that nomore than 10 are listed.lid arithmetic expression.>Make sure that you have used only valid operators and operandsin your expressions.SDA attempts to read theThe combined size of the system and global page tables exceedsThe hardware ECO level is below the level required for correctsoftware operation.8Contact HP Customer Support. The bootstrap operation can8be continued, but the integrity of the software could be compromised.H4I"S1zZBSYSBOOT-W-FPLA, PCS, or WCS version less than minimum required for VMSstrap Facility>The hardware ECO level is below the level required for correctsoftware operation.8Contact HP Customer Support. The bootstrap operation can8be continued, but the integrity of the software could be compromised.]5,"1]kio+SYSBOOT-W-Maximum WS raised to PHD+MINWSCNTstrap Facility8SYSBOOT raised the specified maximum working set size to7accommodate the minimum working set size allowed by theThe hardware ECO level is below the level required for correctsoftware operation.8Contact HP Customer Support. The bootstrap operation can8be continued, but the integrity of the software could be compromised.>7?"S1p~P>SYSBOOT-W-Microcode version less than minimum required for VMSstrap Facility>The hardware ECO level is below the level required for correctsoftware operation.8Contact HP Customer Support. The bootstrap operation can8be continued, but the integrity of the software could be compromised.J8$"{~1Uc\#SYSBOOT-W-Primary home block is badstrap Facility;The primary home block of the system disk could not be read7and an alternate block was selected for use as the homeblock.7Back up the system disk and then use the backup disk as6the new system disk. The current system disk should bereinitialized. ?9@"S1qQ?SYSBOOT-W-System ROM version less than minimum required for VMSstrap Facility>The hardware ECO level is below the level required for correctsoftware operation.8Contact HP Customer Support. The bootstrap operation can8be continued, but the integrity of the software could be compromised. :6"1gu 5SYSBOOT-W-WS default and quota raised to PDH+MINWSCNTstrap Facility8SYSBOOT raised the default working set size specified toTake action based on the message that equates to the specified status code. [-"1^l ,WS default and quota raised to PHD +MINWSCNTstrap Facility9The default size of the working set has been increased to:equal the sum of the working set count (the count of fluid+working set pages) plus the process header.None.eb"1&BCBSNOTSUPTD, Attention - Phase I Shadowing is not supported as of OpenVMS VAX V6.1strap Facility=You specified a phase I volume shadowing virtual unit (DUSnn);in a command. OpenVMS VAX no longer supports phase I volume shadowing.>Reissue the command, using a phase II volume shadowing virtual>unit name (DSAnn) consistent with phase II (host-based) volume shadowing.y3"K91dr2NOTNUMBER, parameter 'name' is not numerical typestrap Facility4In a SET command, a numeric value is specified for anonnumeric parameter.8Reenter the command, specifying a valid parameter value.)"Z!1Zh(STRTOOLNG, specified string is too longstrap Facility>A string specified in a SET command is longer than the maximumlength for that parameter. Correct and reenter the command.o5">1ftC4VASOVF, system virtual address space limit exceededstrap Facilitycapacities within the operating system have pushed the size of;prompt to change the existing entry, or reenter the commandwith a new component file name. \'+1>DBCORRUPT, component data file is corrupt - no terminator for parameter field.ity STARTUP Command*The startup component database is corrupt.;Verify that the file being used is a component database and;that the file has not been edited or otherwise modified. If>the problem still exists, preserve the component database file and contact HP Customer Support. #'q1Tg"FILEGONE, STARTUP file is missingity STARTUP Command=The current startup component database does not exist, or you2do not have read or write access to this database.;To create a new database, use the STARTUP CREATE command at=the SYSMAN> prompt. To select a different component database,;use the STARTUP SET DATABASE command at the SYSMAN> prompt.;If the database exists but you cannot access it, verify the8protection applied to the file (using the DIRECTORY/FULL;command), and change the protection if necessary (using the=SET PROTECTION command). If you cannot change the protection,=ask the system manager or the owner of the file to change the protection.-'>|1^q+,COMFILEMTY, STARTUP component file is emptyity STARTUP Command=The current startup component file does not have any entries.>Use the SYSMAN command STARTUP ADD FILE to add entries to thisA search for startup components running in a given phase foundno matching entries.5Reenter the command with a different /PHASE argument.ADRV, System Startu)}b1ZbA(BADFLAG, bad enable/disable flag 'flag'p Driver8The enable/disable flag describing how the list of nodes:associated with a startup component file should be used isinvalid. prompt to3correct either the file name or the execution mode.}GE<1v~SDOPENFAIL, failure opening component file 'file-number', 'file-name'p Driver>The startup driver failed to open one of the system files that=describes the tasks that need to be performed at startup. TheA file in the startup component database has an execution mode1that is not DIRECT, BATCH, CALLED, SPAWN, or ANY.8To correct the component execution mode, use the STARTUP*MODIFY FILE command at the SYSMAN> prompt. 01aiQ/FATALERR, fatal error reading startup databasep Driver9The startup driver encountered a fatal error while tryingA startup component file in the startup component database has%a file type that is not .COM or .EXE.>Use the SYSMAN command STARTUP MODIFY FILE to correct the filename.Df1u}UCTOOMANYSUB, SPAWN failed, too many subprocesses. DIRECT mode used.p Driver;The startup database directed the startup driver to run too7many spawned subprocesses. STDRV ran one or more of the:processes in the main startup procedure using DIRECT mode.(System startup should complete normally.7Use SYSMAN's STARTUP commands to display and modify the-startup database to spawn fewer subprocesses.J.a1_g\-NOSUCHFILE, file 'file-name' does not exist.p Driver:A startup component file specified in the startup database%does not exist during system startup.@STARTUP command procedure, verify that the first parameter is>FULL, MINIMUM, UPGRADE, or the name of the system component torestart. *,T1[c)BADFILE, invalid filename is 'file-name'p Driver+The startup component file name is invalid. prompt tocorrect the file name.!!hR, String Manipula" !!j1R_h ILLSTRCLA, illegal string classtion Facility>The class code found in the class field of a descriptor is not>a string class code supported by the OpenVMS Procedure Calling and Condition Handling Standard.9If you are programming in a high-level language and usingthat all string descriptors are initialized before using them.""# $!y1Ub<#ILLSTRPOS, illegal string positiontion Facility=Successful completion. However, one of the character-position=parameters to a string routine points to a character-position:that is either before the beginning of the input string or"after the end of the input string.>Ensure that any character-position parameter is greater than 09and less than or equal to the length of the input string.##$ )!1Zgg(ILLSTRSPE, illegal string specificationtion Facility9Successful completion, except that the character-position;parameters specifying a substring of a string parameter are:inconsistent because the ending character-position is less;than the starting character-position. A null string is usedfor the substring.4The applications program should verify that starting4character-positions are less than or equal to endingcharacter-positions.$$5 !fl1N[-DIVBY_ZER, division by zerotion Facility4The string arithmetic routines attempted to take the0reciprocal of a string whose numeric value is 0.=Ensure that any string used as a divisor is not a null string-or any other string whose numeric value is 0.%%L!N51N[INVDELIM, invalid delimitertion Facility;The delimiter string passed to STR$ELEMENT is longer than asingle character.4Examine the delim_dec argument and make corrections.&&O=!I-1n{A user who calls the String facility directly should check the>argument list in the call. High-level language programmers whoverify (when you finish using the storage) that the storage is>released by calling STR$FREE1_DX or LIB$FREE_VM, respectively.An attempt is made to place too many characters into a string.+The value is truncated on the right to fit.:Do not exceed the maximum string length. This error may be*ignored if right truncation is acceptable.//.!>1_l-NOMATCH, no match found against input stringtion Facility=No match is found for the input string passed to the routine.None.004 F!>1wFEERRFREDYN, error freeing dynamic string when returned to LIB$FREE_VMtion Facility9STR is unable to free space allocated to the string; this9usually occurs when a dynamic string descriptor points tostatic storage.=Begin debugging procedures to verify and correct the problem.11UBMIT, SUBMIT Comma.S/1_a-ADDFIL, error adding file 'file-name' to jobnd>The system encountered an error adding the specified file to abatch or print job..Take action based on the accompanying message.22('S!1:BREMOINSF, node name specification or /REMOTE missing from command linend7To print or submit a file residing on a remote node for6processing on that node, the /REMOTE qualifier must be4included in the PRINT or SUBMIT command and the fileThe indicated edit command is not in ascending sequence within9the update file. The editing operation has been performed correctly.5Edit the update file to place the edit in the correct position.<<DSLP1!1111SUM, SUMSLP Batch Editing Utility==YSBOOT, System Boot"-1GUqSYNTAX, syntax errorstrap FacilityA syntax error is detected.,Reenter the command with the correct syntax.>>3"@1dr2SETMAX, value set to maximum for parameter 'name'strap Facility6The value entered in a SET command exceeds the maximumallowed.Verify the intended number.??."H91_m-NOTASCII, parameter 'name' is not ASCII typestrap FacilityAttempt to reboot the system or try a different drive. If this4fails, obtain a new copy of the OpenVMS system disk.DD"71N\&SYSBOOT-E-Error reading filestrap Facility;An irrecoverable error occurred while SYSBOOT was reading a>parameter file in response to a USE command. The error messagecontains the file name.6Reenter the command, specifying the correct file name.EE!"G71R` SYSBOOT-E-I/O error reading filestrap Facility=An irrecoverable I/O error occurred while SYSBOOT was reading9a parameter file or a system loadable image. If the errora system loadable image was being read, SYSBOOT terminates thebootstrap operation.6Attempt to reboot the system or try a different drive.FF"e21P^SYSBOOT-E-Not a parameter filestrap Facility>A file specified in a USE command is not a parameter file. The%error message contains the file name.1Reenter the command, specifying a parameter file.GGZ" 1CSHADOWLBS, clearing low-order bit in SHADOWING; function no longer supportedstrap Facility>The low-order bit in the SYSGEN parameter SHADOWING was set at>boot time. This bit has been cleared and the system was booted=from the physical device named to VMB register 3 (R3). Unless>you have migrated to phase II volume shadowing, no shadow setswill be created.None.HH%(".1Yg 7'SYSBOOT-E-System version mismatch foundstrap Facility;The versions of the system loadable image being read do not8match the current OpenVMS operating system versions. The,images on your system disk are incompatible.-Obtain a new copy of the OpenVMS system disk.II "Hh1Q_SYSBOOT-E-Unable to locate filestrap FacilityThe hardware ECO level is below the level required for correctsoftware operation.Contact HP Customer Support.LL "1N\SYSBOOT-F-Invalid console IDstrap Facilitynonpaged dynamic pool, interrupt stack, and resident executiveoverwrites the CI microcode.The hardware ECO level is below the level required for correctsoftware operation.Contact HP Customer Support.TT(-"1^l,SYSBOOT-F-Unable to allocate physical memorystrap Facility=The sum of pages required for the system page table, nonpaged=dynamic pool, interrupt stack, and resident executive exceedsavailable physical memory.SYSBOOT cannot find enough contiguous pages of physical memory8to contain the required system page table (SPT), process-header (PHD), and system control block (SCB).5Reduce the value of parameters that control SPT size:8VIRTUALPAGECNT (VAX only), BALSETCNT, REALTIME_SPTS, andSPTREQ.WW +0".1ao2/SYSBOOT-F-Unable to locate storage bit map filestrap Facility:SYSBOOT cannot locate the storage bitmap file (BITMAP.SYS)volume when booting the OpenVMS operating system from multiplevolumes.=Attempt to reboot the system; try a different drive or obtain&a new copy of the OpenVMS system disk.ZZ."^1P^SYSBOOT-F-Unexpected exceptionstrap Facility6An unexpected exception occurred indicating a probable&hardware error or SYSBOOT logic error.Contact HP Customer Support.[[/#"b1Tb"SYSBOOT-F-Unexpected machine checkstrap Facility:An unexpected machine check occurred indicating a probable&hardware error or SYSBOOT logic error.Contact HP Customer Support.\\0"1M[SYSBOOT-F-Unknown processorstrap Facility=The processor type code in the system identification register6does not correspond to any supported model of a VAX-11 processor.Contact HP Customer Support.wed.:Specify either the equal-key routine or the stable option.QQ6 +&U1\`*INP_FILES, too many input files specifiedlity%More than 10 input files were listed.;Reduce the number of input files or combine them so that nomore than 10 are listed.lid arithmetic expression.>Make sure that you have used only valid operators and operandsin your expressions.SDA attempts to read the1FSSFNF, file not foundation Utility=SYSGEN is unable to locate the driver image file. The default:directory and disk device for driver images is SYS$SYSTEM.5This message is also produced during an AUTOCONFIGURE:operation if a UNIBUS device does not have a correspondingdriver in SYS$SYSTEM.=Restore the image file to the system disk from a backup disk.2 ![-1Q^SYNTAX, syntax error: 'string'ation UtilityCONNECT, or the one that is specified is not within the UNIBUSinterrupt vector address range.6Reenter the command, specifying a valid vector number. 2"A!1r#@WRITEACT, ACTIVE system parameters modified by process ID 'pid'ation Utility8This message is written to the operator's console when a;WRITE ACTIVE operation is done from SYSGEN. This message is(a monitoring aid for the system manager.None. 2%V!^!1@INVBUSNODE, invalid BUS and NODE combination - no corresponding ADAPTERation Utility:You specified an invalid combination of bus type and nexus"node number as command parameters. Correct and reenter the command. 24)c!1@FAWRITECUR, CURRENT system parameters modified by process ID 'pid' into file 'file-spec'ation Utility8This message is written to the operator's console when a9WRITE CURRENT operation is done from SYSGEN. This message+is a monitoring aid for the system manager.None. 2U-U!jj1g;SHMDBLUSE, MA780 cannot be used for main memory and system interconnectation Utility>You requested that SYSGEN use MA780 memory as multiport memory*to be shared among one or more processors.=Recheck your memory configuration and remove any MA780 memory+modules before reissuing the SHARE command.2(8/!tY1`m:.NONSMPDRV, nonsmpized driver cannot be loadedation Utility>SYSGEN cannot load this driver because the driver has not been4modified to support symmetric multiprocessing (SMP).9Modify the driver to conform to symmetric multiprocessingrequirements, or turn off SMP.29b!=1ENONSTDUNI, UNIBUS in nonstandard configuration, device 'device-name' vector is wrongation UtilityThe device driver specified for a LOAD or CONNECT command does)not support extended physical addressing.>A new device driver that supports extended physical addressing8is required for the specified device. Contact the device%vendor to obtain a new device driver.2:+!G/1\i*UNKADAP, unknown adapter type encounteredation Utility8An internal error occurred when SYSGEN tried to parse an adapter name..Check the command line for errors and reenter.2<&!H21Wd%UNKCPU, unknown CPU type encounteredation Utility9An unknown CPU type was specified with the SYSGEN command SHOW/ADAPTER.1Reenter the command, specifying a valid CPU type.2VI/!d1`mh.SKIPPED, section of address space was skippedation Utility;While scanning the specified bus, SYSGEN encountered one or=more CSR locations that violate the I/O address configurationrules of the particular bus.=Recheck the hardware configuration on the bus and resolve any%misconfigured or faulty bus adapters.2MB!A@1sAPRTEXT, file only partly extended. Volume may be too fragmented.ation Utility9The SYSGEN command CREATE failed due to insufficient diskspace.4Clean up your disk space, or specify a smaller /SIZE qualifier.2O (!J>1Yf'DRIVENAM, driver name is 'driver-name'ation Utility=This message is issued with the message SYSVERDIF to identify the driver.=See the SYSGEN message SYSVERDIF for user action information.2O!D!1MZNOPARAM, no such parameteration UtilityThe specified device either does not exist on the system or is&unknown or unrecognized by the system.>Specify a device that exists on the system or is recognized by the system.2X&!L=1Wd%NODEVADAP, no devices on adapter 'n'ation Utility;A SHOW/CONFIGURATION operation was tried on an adapter thathas no devices.Reassemble and relink all drivers at each major release of theOpenVMS operating system.$$2Rw$!l1Ubd#SPTFULL, system page table is fullation Utility7There is no space available in the system page table to9allocate a system page for the device (requested by DPT$_#MSVP in the driver prologue table).>Reboot the system, stopping in SYSBOOT, and increase the value,of the system page table parameter (SPTREQ).%%2yU!a21&>BADPARAM, insufficient shared memory to create specified data structuresation Utility=The sum of all the data structures specified is more than the"available amount of shared memory.1Recalculate memory usage and reenter the command.&&2z3!K91dq2NOTNUMBER, parameter 'name' is not numerical typeation Utility4In a SET command, a numeric value is specified for anonnumeric parameter.8Reenter the command, specifying a valid parameter value.''2.!1_l{ -SRVALLOAD, the MSCP server is already loadedation Utility:An attempt was made to load the MSCP server using the MSCP=command in SYSGEN, and the server is already loaded using the;SYSGEN parameter MSCP_LOAD. The MSCP server has been loaded:the recommended way. This warning is printed to remind youthat this command is obsolete.The SYSGEN command CONFIGURE specifies a number that is eithertoo small or too large.>Reenter the command, specifying a number within the range of 1to 127.**2A!W<1r@OVERFLOW, overflow in floating addresses, illegal configurationation Utility9The SYSGEN command CONFIGURE computed an illegal floatingaddress for a CSR or vector.;Reenter the command with the correct number of controllers.++2B!71sABADSETAFF, attempt to set process affinity to primary cpu failedation Utility6SYSGEN cannot set process affinity to the primary CPU.Contact HP Customer Support.,,2 E!A>1vDINPUT_ERR, devices 'device-names' must be entered as 'device-names'ation Utility7You incorrectly specified device names in the CONFIGUREcommand.=Reenter the device names as listed in the error message text.--2!#1P]zNOSCS, error loading SCS codeation UtilitySCSLOA.EXE cannot be loaded."Do not attempt to load SCSLOA.EXE...2]!P1DTMSCPLDERR, TMSCP server must be loaded by setting SYSGEN parameter TMSCP_LOADation Utility!_1o|=EMPTYFILE, zero-length page or swap file cannot be installedation Utility=An attempt was made to install a zero-length page or swapping file; these cannot be installed.None.002s Z!_1?INSFCONTIG, insufficient contiguous space; file allocated non- contiguouslyation Utilityof a startup command procedure, changing the parameter to load;the server earlier will enable the old command procedure to2complete successfully with only a warning message.332#!L1Ta"INVPARFIL, invalid parameter fileation Utility:An error occurred accessing the file specified in a USE orWRITE operation.:Check that the file is not protected against read or write9access and then reenter your command. If the error occurs>again, but the file can be read or written by other utilities,:retain a copy of the invalid parameter file and contact HPCustomer Support.442 "!C1S`!ENDBUS, end of bus address spaceation Utility=The system encountered the end of I/O space for the specifiedbus.None.552)!Z!1Zg(STRTOOLNG, specified string is too longation Utility>A string specified in a SET command is longer than the maximumlength for that parameter. Correct and reenter the command.662"$!1Ub.4#NOUNLOAD, driver is not unloadableation Utility;Either an attempt is made to reload a driver that is markedFILETOOBIG, file only partially installed - size exceeds max. page/swap file sizeation UtilityThe interrupt vector address specified in a CONNECT command isbeing used by another device.>Change the vector address in the device driver and reenter thecommand.>>2]!Y/1#5BADCHKSUM, shared memory data structures corrupted -& reinitialization necessaryation Utilitycould not be deinstalled because it is still being used by oneor more active processes.5Stop the processes using the page or swap file beforeattempting to deinstall it.@@2*!c81[h)NEXNOTUBA, nexus is not a UNIBUS adapteration Utility=This message is returned from SHOW/UNIBUS when you specify an$adapter other than a UNIBUS adapter.7Reenter the command, specifying a valid UNIBUS adapter.AA2g B!W1s"yAFILNOTINS, file is not installed, or it is permanently installedation Utility:The page or swap file that was requested to be deinstalled>either was not installed on the system, or is a permanent page'or swap file and cannot be deinstalled.=Select for deinstallation only files that are not permanentlyinstalled on the system.BB26!l@1gt 5NOSUCHMEM, no shared memory found at specified NEXUSation Utility8The desired shared memory unit number was not found in a2search of the backplane interconnect adapter list.7Reenter the command, specifying the correct device unitnumber.CC2.!\1_l-NOLOCK, error obtaining SYSGEN database lockation Utility=SYSGEN failed to secure an exclusive lock on the I/O databaseto synchronize modifications.Contact HP Customer Support.DD2@!.Y1q~?SWAPAGINS, all additional page or swap files already installedation Utility-Two second-page or swap files were installed.>If it is necessary to change the page or swap file, reboot andinstall the correct file.EE2 i!R1?EQV_NOTICE, equivalent name - device 'controller-name' will be( output as 'controller-name'ation Utility>An equivalent name for a controller is entered with the SYSGENcommand CONFIGURE.None.FF20!*1an/TSRVALLOAD, the TMSCP server is already loadedation Utilitycommand in SYSGEN. The TMSCP server has already been loaded in>the recommended way by setting the SYSGEN parameter TMSCP_LOAD>to 1. This action loads the server, which services all locally/connected MSCP-type tape drives during SYSBOOT.None.GG20!H!1an/NOADAPTER, no adapter (nexus) number specifiedation Utility>The /ADAPTER qualifier must be specified in the SYSGEN commandCONNECT. Correct and reenter the command.HH2Q!F$1@TWICE, device 'controller-name' - count changed from 'count' to 'count'ation UtilityEvaluate the shadow set membership and perhaps add more disks.MM2E=6E1nxThere was insufficient nonpaged pool available to allocate the>error log recovery buffer used to store the error log messages;for ERRFMT to copy out later to the error log file. Because>not enough pool is available to allocate the storage area, the#error log messages cannot be saved.>Increase the SYSGEN parameter NPAGEDYN so that enough nonpagedTry to determine the cause of the failure. If a running system>is not available to determine the ident, contact your software4support organization to determine the ident for you.PP2H81is7SYSINIT-E-error loading message file, status = 'status'ialization:The system message file, SYS$MESSAGE:SYSMSG.EXE, could not:be loaded into the system. The 'status' field provides the3failure status represented as a hexadecimal number.=Try to determine the cause of the failure. If you do not have:a running system available to determine the ident, contact=your software support organization to determine the ident foryou.QQ2IF1wUESYSINIT-E-error loading RECOVERY_UNIT_SERVICES.EXE, status = 'status'ialization7The OpenVMS RECOVERY_UNIT_SERVICES image, SYS$LOADABLE_;IMAGES:RECOVERY_UNIT_SERVICES.EXE, could not be loaded into:the system. The 'status' field provides the failure status$represented as a hexadecimal number.=Try to determine the cause of the failure. If you do not have:a running system available to determine the ident, contact=your software support organization to determine the ident foryou.RR2J31dn2SYSINIT-E-error loading RMS.EXE, status = 'status'ialization=The RMS file system image, SYS$LOADABLE_IMAGES:RMS.EXE, could>not be loaded into the system. The 'status' field provides the3failure status represented as a hexadecimal number.=Try to determine the cause of the failure. If you do not have:a running system available to determine the ident, contact=your software support organization to determine the ident foryou.SS2K:c1kuy9SYSINIT-E-error mounting system device, status = 'status'ialization;An error condition is preventing the system disk from being1oy=SYSINIT-E-error opening or mapping F11BXQP, status = 'status'ialization:The OpenVMS file system, SYS$SYSTEM:F11BXQP.EXE, could notThe primary paging file, SYS$SYSTEM:PAGEFILE.SYS, could not be7opened. The 'status' field provides the failure status.=Try to determine the cause of the failure. If you do not have:a running system available to determine the ident, contact=your software support organization to determine the ident foryou.VV2N5{1fp4SYSINIT-E-error opening swap file, status = 'status'ialization8The system swap file, SYS$SYSTEM:SWAPFILE.SYS, could not9be opened. The 'status' field provides the actual failurestatus.=Try to determine the cause of the failure. If you do not have:a running system available to determine the ident, contact=your software support organization to determine the ident foryou.WW2O<1mw;SYSINIT-E-error opening system dump file, status = 'status'ialization8The system dump file, SYS$MESSAGE:SYSDUMP.DMP, could not:be loaded into the system. The 'status' field provides the3failure status represented as a hexadecimal number.>If you do not have a running system available to determine the>ident, contact your software support organization to determinethe ident for you.XX2PP]1QDSYSINIT-E-error reading system dump file error log buffers, status = 'status'ialization=An error occurred while reading the error log buffers in from;the dump file. The hexadecimal error status value described9by 'status' is the failure status returned after the readoperation failed.7Check the system dump file for disk errors. It might be$necessary to create a new dump file.YY2QB1s}ASYSINIT-E-error taking out lock on system disk, status = 'status'ialization:An error was encountered when acquiring a clusterwide lockwhose name contains the system ID. The 'status' field provides7the failure status represented as a hexadecimal number.=Try to determine the cause of the failure. If you do not have:a running system available to determine the ident, contact=your software support organization to determine the ident foryou.^^2V5I1fp4SYSINIT-I- found a valid OpenVMS Cluster quorum diskialization=The cluster quorum disk and quorum file have been located and validated.None.__2XW6.1gqj5SYSINIT-I- no dump file - error log buffers not savedializationavailable and error log buffers are saved across a shutdown orsystem failure.``2XJF1{9SYSINIT-I- PAGEFILE.SYS not found - system initialization continuing...ialization>The primary paging file, SYS$SYSTEM:PAGEFILE.SYS, could not befound.=Use the command procedure SYS$UPDATE:SWAPFILES.COM to place aThe cluster quorum disk and nodes are being searched to form acluster quorum.None.bb2&Z@1q{28?SYSINIT-W- dump file write errors - error log buffers not savedialization>Since the entire dump file contents are suspect, the dump file>write is not successfully completed, and no attempt is made to8recover the saved error log messages from the dump file.None.cc29[E1vEKDSYSINIT-W- invalid dump header version - error log buffers not savedialization;The dump file contains the contents of a dump written undermessages saved in the dump file are not read out from the dump>file, since the format of the dump file and error log messages=may be different from that format being used on this version.;This message is primarily to warn users that some error logmessages have been lost.None.fiedlity%More than 10 input files were listed.;Reduce the number of input files or combine them so that nomore than 10 are listed.lid arithmetic expression.>Make sure that you have used only valid operators and operandsin your expressions.SDA attempts to read theSYSINIT has tried for one minute to acquire the needed device.=Typically this error occurs when a common system disk is used;for a large number of nodes and all nodes are attempting towithout user intervention. If this problem persists, check theCONNECT, or the one that is specified is not within the UNIBUSinterrupt vector address range.6Reenter the command, specifying a valid vector number. 2"A!1r#@WRITEACT, ACTIVE system parameters modified by process ID 'pid'ation Utility8This message is written to the operator's console when a;WRITE ACTIVE operation is done from SYSGEN. This message is(a monitoring aid for the system manager.None. 2%V!^!1@INVBUSNODE, invalid BUS and NODE combination - no corresponding ADAPTERation Utility:You specified an invalid combination of bus type and nexus"node number as command parameters. Correct and reenter the command. 24)c!1@FAWRITECUR, CURRENT system parameters modified by process ID 'pid' into file 'file-spec'ation Utility8This message is written to the operator's console when a9WRITE CURRENT operation is done from SYSGEN. This message+is a monitoring aid for the system manager.None. 2U-U!jj1g;SHMDBLUSE, MA780 cannot be used for main memory and system interconnectation Utility>You requested that SYSGEN use MA780 memory as multiport memory*to be shared among one or more processors.=Recheck your memory configuration and remove any MA780 memory+modules before reissuing the SHARE command.2(8/!tY1`m:.NONSMPDRV, nonsmpized driver cannot be loadedation Utility>SYSGEN cannot load this driver because the driver has not been4modified to support symmetric multiprocessing (SMP).9Modify the driver to conform to symmetric multiprocessingrequirements, or turn off SMP.29b!=1ENONSTDUNI, UNIBUS in nonstandard configuration, device 'device-name' vector is wrongation UtilityThe device driver specified for a LOAD or CONNECT command does)not support extended physical addressing.>A new device driver that supports extended physical addressing8is required for the specified device. Contact the device%vendor to obtain a new device driver.2:+!G/1\i*UNKADAP, unknown adapter type encounteredation Utility8An internal error occurred when SYSGEN tried to parse an adapter name..Check the command line for errors and reenter.2<&!H21Wd%UNKCPU, unknown CPU type encounteredation Utility9An unknown CPU type was specified with the SYSGEN command SHOW/ADAPTER.1Reenter the command, specifying a valid CPU type.2VI/!d1`mh.SKIPPED, section of address space was skippedation Utility;While scanning the specified bus, SYSGEN encountered one or=more CSR locations that violate the I/O address configurationrules of the particular bus.=Recheck the hardware configuration on the bus and resolve any%misconfigured or faulty bus adapters.2MB!A@1sAPRTEXT, file only partly extended. Volume may be too fragmented.ation Utility9The SYSGEN command CREATE failed due to insufficient diskspace.4Clean up your disk space, or specify a smaller /SIZE qualifier.2O (!J>1Yf'DRIVENAM, driver name is 'driver-name'ation Utility=This message is issued with the message SYSVERDIF to identify the driver.=See the SYSGEN message SYSVERDIF for user action information.2O!D!1MZNOPARAM, no such parameteration UtilityThe specified device either does not exist on the system or is&unknown or unrecognized by the system.>Specify a device that exists on the system or is recognized by the system.2X&!L=1Wd%NODEVADAP, no devices on adapter 'n'ation Utility;A SHOW/CONFIGURATION operation was tried on an adapter thathas no devices.Reassemble and relink all drivers at each major release of theOpenVMS operating system.$$2Rw$!l1Ubd#SPTFULL, system page table is fullation Utility7There is no space available in the system page table to9allocate a system page for the device (requested by DPT$_#MSVP in the driver prologue table).>Reboot the system, stopping in SYSBOOT, and increase the value,of the system page table parameter (SPTREQ).%%2yU!a21&>BADPARAM, insufficient shared memory to create specified data structuresation Utility=The sum of all the data structures specified is more than the"available amount of shared memory.1Recalculate memory usage and reenter the command.&&2z3!K91dq2NOTNUMBER, parameter 'name' is not numerical typeation Utility4In a SET command, a numeric value is specified for anonnumeric parameter.8Reenter the command, specifying a valid parameter value.''2.!1_l{ -SRVALLOAD, the MSCP server is already loadedation Utility:An attempt was made to load the MSCP server using the MSCP=command in SYSGEN, and the server is already loaded using the;SYSGEN parameter MSCP_LOAD. The MSCP server has been loaded:the recommended way. This warning is printed to remind youthat this command is obsolete.The SYSGEN command CONFIGURE specifies a number that is eithertoo small or too large.>Reenter the command, specifying a number within the range of 1to 127.**2A!W<1r@OVERFLOW, overflow in floating addresses, illegal configurationation Utility9The SYSGEN command CONFIGURE computed an illegal floatingaddress for a CSR or vector.;Reenter the command with the correct number of controllers.++2B!71sABADSETAFF, attempt to set process affinity to primary cpu failedation Utility6SYSGEN cannot set process affinity to the primary CPU.Contact HP Customer Support.,,2 E!A>1vDINPUT_ERR, devices 'device-names' must be entered as 'device-names'ation Utility7You incorrectly specified device names in the CONFIGUREcommand.=Reenter the device names as listed in the error message text.--2!#1P]zNOSCS, error loading SCS codeation UtilitySCSLOA.EXE cannot be loaded."Do not attempt to load SCSLOA.EXE...2]!P1DTMSCPLDERR, TMSCP server must be loaded by setting SYSGEN parameter TMSCP_LOADation Utility!_1o|=EMPTYFILE, zero-length page or swap file cannot be installedation Utility=An attempt was made to install a zero-length page or swapping file; these cannot be installed.None.002s Z!_1?INSFCONTIG, insufficient contiguous space; file allocated non- contiguouslyation Utilityof a startup command procedure, changing the parameter to load;the server earlier will enable the old command procedure to2complete successfully with only a warning message.332#!L1Ta"INVPARFIL, invalid parameter fileation Utility:An error occurred accessing the file specified in a USE orWRITE operation.:Check that the file is not protected against read or write9access and then reenter your command. If the error occurs>again, but the file can be read or written by other utilities,:retain a copy of the invalid parameter file and contact HPCustomer Support.442 "!C1S`!ENDBUS, end of bus address spaceation Utility=The system encountered the end of I/O space for the specifiedbus.None.552)!Z!1Zg(STRTOOLNG, specified string is too longation Utility>A string specified in a SET command is longer than the maximumlength for that parameter. Correct and reenter the command.662"$!1Ub.4#NOUNLOAD, driver is not unloadableation Utility;Either an attempt is made to reload a driver that is markedFILETOOBIG, file only partially installed - size exceeds max. page/swap file sizeation UtilityThe interrupt vector address specified in a CONNECT command isbeing used by another device.>Change the vector address in the device driver and reenter thecommand.>>2]!Y/1#5BADCHKSUM, shared memory data structures corrupted -& reinitialization necessaryation Utilitycould not be deinstalled because it is still being used by oneor more active processes.5Stop the processes using the page or swap file beforeattempting to deinstall it.@@2*!c81[h)NEXNOTUBA, nexus is not a UNIBUS adapteration Utility=This message is returned from SHOW/UNIBUS when you specify an$adapter other than a UNIBUS adapter.7Reenter the command, specifying a valid UNIBUS adapter.AA2g B!W1s"yAFILNOTINS, file is not installed, or it is permanently installedation Utility:The page or swap file that was requested to be deinstalled>either was not installed on the system, or is a permanent page'or swap file and cannot be deinstalled.=Select for deinstallation only files that are not permanentlyinstalled on the system.BB26!l@1gt 5NOSUCHMEM, no shared memory found at specified NEXUSation Utility8The desired shared memory unit number was not found in a2search of the backplane interconnect adapter list.7Reenter the command, specifying the correct device unitnumber.CC2.!\1_l-NOLOCK, error obtaining SYSGEN database lockation Utility=SYSGEN failed to secure an exclusive lock on the I/O databaseto synchronize modifications.Contact HP Customer Support.DD2@!.Y1q~?SWAPAGINS, all additional page or swap files already installedation Utility-Two second-page or swap files were installed.>If it is necessary to change the page or swap file, reboot andinstall the correct file.EE2 i!R1?EQV_NOTICE, equivalent name - device 'controller-name' will be( output as 'controller-name'ation Utility>An equivalent name for a controller is entered with the SYSGENcommand CONFIGURE.None.FF20!*1an/TSRVALLOAD, the TMSCP server is already loadedation Utilitycommand in SYSGEN. The TMSCP server has already been loaded in>the recommended way by setting the SYSGEN parameter TMSCP_LOAD>to 1. This action loads the server, which services all locally/connected MSCP-type tape drives during SYSBOOT.None.GG20!H!1an/NOADAPTER, no adapter (nexus) number specifiedation Utility>The /ADAPTER qualifier must be specified in the SYSGEN commandCONNECT. Correct and reenter the command.HH2Q!F$1@TWICE, device 'controller-name' - count changed from 'count' to 'count'ation UtilityEvaluate the shadow set membership and perhaps add more disks.MM2E=6E1nxThere was insufficient nonpaged pool available to allocate the>error log recovery buffer used to store the error log messages;for ERRFMT to copy out later to the error log file. Because>not enough pool is available to allocate the storage area, the#error log messages cannot be saved.>Increase the SYSGEN parameter NPAGEDYN so that enough nonpagedTry to determine the cause of the failure. If a running system>is not available to determine the ident, contact your software4support organization to determine the ident for you.PP2H81is7SYSINIT-E-error loading message file, status = 'status'ialization:The system message file, SYS$MESSAGE:SYSMSG.EXE, could not:be loaded into the system. The 'status' field provides the3failure status represented as a hexadecimal number.=Try to determine the cause of the failure. If you do not have:a running system available to determine the ident, contact=your software support organization to determine the ident foryou.QQ2IF1wUESYSINIT-E-error loading RECOVERY_UNIT_SERVICES.EXE, status = 'status'ialization7The OpenVMS RECOVERY_UNIT_SERVICES image, SYS$LOADABLE_;IMAGES:RECOVERY_UNIT_SERVICES.EXE, could not be loaded into:the system. The 'status' field provides the failure status$represented as a hexadecimal number.=Try to determine the cause of the failure. If you do not have:a running system available to determine the ident, contact=your software support organization to determine the ident foryou.RR2J31dn2SYSINIT-E-error loading RMS.EXE, status = 'status'ialization=The RMS file system image, SYS$LOADABLE_IMAGES:RMS.EXE, could>not be loaded into the system. The 'status' field provides the3failure status represented as a hexadecimal number.=Try to determine the cause of the failure. If you do not have:a running system available to determine the ident, contact=your software support organization to determine the ident foryou.SS2K:c1kuy9SYSINIT-E-error mounting system device, status = 'status'ialization;An error condition is preventing the system disk from being1oy=SYSINIT-E-error opening or mapping F11BXQP, status = 'status'ialization:The OpenVMS file system, SYS$SYSTEM:F11BXQP.EXE, could notThe primary paging file, SYS$SYSTEM:PAGEFILE.SYS, could not be7opened. The 'status' field provides the failure status.=Try to determine the cause of the failure. If you do not have:a running system available to determine the ident, contact=your software support organization to determine the ident foryou.VV2N5{1fp4SYSINIT-E-error opening swap file, status = 'status'ialization8The system swap file, SYS$SYSTEM:SWAPFILE.SYS, could not9be opened. The 'status' field provides the actual failurestatus.=Try to determine the cause of the failure. If you do not have:a running system available to determine the ident, contact=your software support organization to determine the ident foryou.WW2O<1mw;SYSINIT-E-error opening system dump file, status = 'status'ialization8The system dump file, SYS$MESSAGE:SYSDUMP.DMP, could not:be loaded into the system. The 'status' field provides the3failure status represented as a hexadecimal number.>If you do not have a running system available to determine the>ident, contact your software support organization to determinethe ident for you.XX2PP]1QDSYSINIT-E-error reading system dump file error log buffers, status = 'status'ialization=An error occurred while reading the error log buffers in from;the dump file. The hexadecimal error status value described9by 'status' is the failure status returned after the readoperation failed.7Check the system dump file for disk errors. It might be$necessary to create a new dump file.YY2QB1s}ASYSINIT-E-error taking out lock on system disk, status = 'status'ialization:An error was encountered when acquiring a clusterwide lockwhose name contains the system ID. The 'status' field provides7the failure status represented as a hexadecimal number.=Try to determine the cause of the failure. If you do not have:a running system available to determine the ident, contact=your software support organization to determine the ident foryou.^^2V5I1fp4SYSINIT-I- found a valid OpenVMS Cluster quorum diskialization=The cluster quorum disk and quorum file have been located and validated.None.__2XW6.1gqj5SYSINIT-I- no dump file - error log buffers not savedializationavailable and error log buffers are saved across a shutdown orsystem failure.``2XJF1{9SYSINIT-I- PAGEFILE.SYS not found - system initialization continuing...ialization>The primary paging file, SYS$SYSTEM:PAGEFILE.SYS, could not befound.=Use the command procedure SYS$UPDATE:SWAPFILES.COM to place aThe cluster quorum disk and nodes are being searched to form acluster quorum.None.bb2&Z@1q{28?SYSINIT-W- dump file write errors - error log buffers not savedialization>Since the entire dump file contents are suspect, the dump file>write is not successfully completed, and no attempt is made to8recover the saved error log messages from the dump file.None.cc29[E1vEKDSYSINIT-W- invalid dump header version - error log buffers not savedialization;The dump file contains the contents of a dump written undermessages saved in the dump file are not read out from the dump>file, since the format of the dump file and error log messages=may be different from that format being used on this version.;This message is primarily to warn users that some error logmessages have been lost.None.fiedlity%More than 10 input files were listed.;Reduce the number of input files or combine them so that nomore than 10 are listed.lid arithmetic expression.>Make sure that you have used only valid operators and operandsin your expressions.SDA attempts to read theThe specified prefix list is currently in effect. This messageis informational.None.6 5!U51fs4IMGADDED, added image 'image' for product 'product'ement Utility=The named image file was added to the loadable image databasefor the named product.4Verify that the named image and product are correct.< @!I21q~?IMGINV, image name invalid - must contain valid file name onlyement Utility=The image name's file specification contains more than just a file name.1Reenter the command with a valid image file name.>6!UE1gt5CAFINVGROUP, group number is invalid or out of rangeement Utility>A CONFIGURATION SET CLUSTER_AUTHORIZATION command specified aninvalid group number.=Reenter the command with a numeric group number between 1 and65535.%?@!fS1q~7?CAFNEITHER, neither GROUP nor PASSWORD given - no action takenement Utility9A CONFIGURATION SET CLUSTER_AUTHORIZATION command did not+supply either a group number or a password.>Reenter the command with the /GROUP or /PASSWORD qualifier, orboth, as necessary. @e!<1BCAFNOTCLU, *Warning* - Environment not CLUSTER - check all system! disks for consistencyement Utility:A CONFIGURATION SET/SHOW CLUSTER_AUTHORIZATION command was=entered in a noncluster environment. To ensure consistency of>the CAF database throughout the cluster, these commands should/normally be entered from a cluster environment.;Change the environment and reenter the command, if desired. @ 9!Y51jw8IMGREMOVED, removed image 'image' for product 'product'ement Utility8The named image file was removed from the loadable imagedatabase for the named product.4Verify that the named image and product are correct. A1!&1bo*0CAFOLDGROUP, existing group will not be changedement Utility=A CONFIGURATION SET CLUSTER_AUTHORIZATION command specified aA CONFIGURATION SET CLUSTER_AUTHORIZATION command specified aninvalid password.*Reenter the command with a valid password.Dc!61BCAFREBOOT, cluster authorization file updated. The entire cluster should be rebooted.ement Utility5When the CAF is updated, you must reboot the cluster.Reboot the cluster.D(!_1Yf'NOOPER, SYSMAN requires OPER privilegeement UtilityOPER privilege is required.=Enter a SET PROCESS/PRIVILEGE=OPER command from the DCL level before entering SYSMAN commands.!Q.!1_l3-INVDEVICE, invalid device 'xxxxxx' specifiedement Utility9The device indicated does not exist on the target system.;If 'xxxxxx' is a logical name, then the translation of that8logical name is not a valid device on the target system.Specify a valid device.Q;!g"1ly:NODENOTCLU, node 'node-name' is not currently in cluster.ement Utility;During a STARTUP ENABLE action, a node not currently in the*OpenVMS Cluster environment was specified.!Verify that node name is correct.(S@!|@1q~:?NOPARM, either a parameter name or group qualifier is requiredement Utility>A PARAMETERS SHOW command must include either a parameter namecommand exceeds 63 characters. The 63-character restriction is+determined by the field size in SYSALF.DAT.9Specify a device name that is no more than 63 characters.,!ST1]j+OUTPUT, command execution on node 'nnnnnn'ement Utility prompt.@!1q~b ?USEACTNOD, a USE ACTIVE has been defaulted on node 'node-name'ement Utility8The SYSMAN command PARAMETERS SHOW or PARAMETERS SET was:issued without being preceded by a PARAMETERS USE command.81dq2FILADDED, added file 'file-name' in phase 'phase'ement Utility=The named startup component file is added to the named phase.7Verify that the listed file name and phase are correct.&&6!821gt5BADRESSIZ, invalid value for memory reservation sizeement Utility7An invalid value was specified for the /SIZE qualifier.1Specify a positive value for the /SIZE qualifier.''Ob!:1'aDVALUOVRFLOW, value too large for 'system-parameter'; field width is only 'n' bytesement UtilityCONFIRMINPUT, SYS$COMMAND is not a terminal; /CONFIRM ignoredement Utility:A SYSMAN command with the /CONFIRM qualifier was submitted,from something other than a terminal device.Manual for more information about UICs.) If you use the /GROUP-qualifier, specify a value between 0 and 255.55 1!F-1bo0FILREMOVED, file 'file-name' removed from phaseement Utility>The named startup component file is removed from the specifiedphase.,Verify that the listed file name is correct.66 "!E/1S`!ENV, current command environmentement Utility;The current environment is changed with the SET ENVIRONMENTcommand..Verify that the listed environment is correct.77 $!h/1Ub#ENVNOTSET, environment not changedement Utility>An error occurred in processing a SET ENVIRONMENT command. The(previous environment is still in effect..Take action based on the accompanying message.885!p51fs4NULLPRIV, no privileges specified - no action takenement Utility>A SET PROFILE command specified neither a change in privileges0nor a change in the default device or directory.4Reenter the command with the appropriate qualifiers.99TEM, System Servi#1TW"BADFILENAME, bad file name syntaxces=This message is associated with a status code returned from aspecification contains illegal characters or is longer than 39 characters.8Check for a programming error. Verify that the file name8strings consist only of the characters A through Z and 02through 9, and are no longer than nine characters.:: \}1 AFLTUND_F, arithmetic fault, floating underflow at PC='xxxxxxxx', PSL='xxxxxxxx'ces=During an arithmetic operation, a floating-point value became8less than the smallest representable value for that datatype.;Examine the PC location displayed in the message; check the8program listing to verify that operands or variables arespecified correctly.;;F )Z1Z]X(ILLPAGCNT, illegal page count parameterces=The number of pages specified for an expand or control region7request is less than 1 or it would cause the program or*control region to exceed its maximum size.9Check for a programming error; verify the number of pagesspecified for the service call.<<-2 1^a,NOAUDIT, operation requires AUDIT privilegeces1The requested operation requires AUDIT privilege.:Use the $SETPRV system service to temporarily enable AUDIT:privilege for the system service call, or install the base:image with AUDIT privilege. The HP OpenVMS Guide to System;Security describes potential ramifications of installing animage with AUDIT privilege.==,Q1]`p+WASECC, successful transfer; no data checkces9This message is associated with a status code returned by;I/O functions. A data check operation is not performed. The;function is a read operation that is completed successfully;by applying one or more ECC corrections. The specified data!check, however, is not performed.>Modify the source program, if necessary, to detect and respondto the condition.>>d/1`cv.NOSYSGBL, operation requires SYSGBL privilegeces>A command or program requested a system function that requires8SYSGBL privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.?? 6w:1gj5OBJLOCKED, security object is locked by another userces>$SET_SECURITY or $GET_SECURITY used the WLOCK option to try to7write-lock a protected object that is currently locked.9Wait for the lock to be released and retry the operation.@@M"<1SV_!POOLEXPF, pool expansion failureces5This message signals one of the following conditions:=o There are not enough free physical pages to expand nonpaged pool.request error for a start data transfer request. The third and=fourth words of the IOSB contain the LPA11-K Ready-Out Status:Register and Maintenance Register contents. In particular,=the high byte of the third word contains the specific LPA11-K error code.Specify a legal combination of scheduling priority and policy.=(Refer to the description of $SETPRI in the HP OpenVMS SystemServices Reference Manual.)HH1LOMEDOFL, medium is offlineces8An I/O request cannot be satisfied because the specifiedIf the device remains offline, contact HP Customer Support for assistance.II\h1MPNOMOREFILES, no more filesces>No more files match a wildcard in a file specification string.At least one match is found.7Note the condition and, if necessary, modify the source/program to detect and respond to the condition.JJd/1`cv.NOSYSNAM, operation requires SYSNAM privilegeces>A command or program requested a system function that requires8SYSNAM privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.KKd/1`cv.NOSYSPRV, operation requires SYSPRV privilegeces>A command or program requested a system function that requires8SYSPRV privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.LLC1twF*BOFF_NOTPAGALGN, specified offset is not CPU-specific page alignedces;The specified page offset is not CPU-specific page aligned.=Or, if the specified virtual address range is within a shared;page table region, the specified offset is not CPU-specificpage table page aligned.;Ensure that the offset passed to the system service is CPU-;specific page aligned. Or, if the specified virtual address;range is within a shared page table region, ensure that the/offset is CPU-specific page table page aligned.MM+g1\_*NOMOREITEMS, no more items to be returnedces>A request dealing with a wildcard list was completed and there'are no additional items to be returned.None.NN 1QThBLOCKCNTERR, block count errorces;The number of blocks read differs from the number of blocks9recorded in the trailer labels when a file that is opened:for a read operation is deaccessed. A noise record is read:or a valid record is not read; either the magnetic tape is'defective or a hardware problem exists.>Mount the magnetic tape on another drive/controller and repeatA request to remove a certain number of datagrams from a queue9succeeded only partially because there were fewer entries9available than requested. This warning message should notappear.None.PP *l1[^)SYNCH, synchronous successful completionces8This alternate success code indicates that the requested2operation completed synchronously and as expected.None.QQ 5aN1fi4NOTALLPRIV, not all requested privileges authorizedces9Unauthorized privileges were requested from $SETPRV. Only&authorized privileges will be granted.5If necessary, ask the system manager to grant you theappropriate privileges.RRo 21FI{Memory dump completeces1No errors were encountered during the dump write.None.SS &Q1PSyNOMOREPROC, no more processesces%The search for processes is complete.>Modify the source program, if necessary, to detect and respondto the condition.TT8 ;;1loJ:CONNECFAIL, connect to network object timed-out or failedces:The remote node did not respond to the connection request.5If you are using DECdtm services in a Phase IV DECnet9environment, verify that the remote node is reachable and try again.=If you are using DECdtm services in a DECnet-Plus network, doone of the following:9o Verify that the remote node is reachable and try again.8o Make sure that the local node name is not identical to: another node name. For information about doing this, see the DECdns Management manual.UUk]1KNINVARG, invalid argumentces>Either your program specified an invalid argument or the value+of an argument is not in the correct range.:Correct the program to specify a valid argument or a value!that is within the correct range.VV-9@1^a,Memory dump complete after 'nn' write errorsces8Errors were encountered during the dump write operation.5Be aware that analysis of the crash dump might not be possible.WWe/1`cw.NOBUGCHK, operation requires BUGCHK privilegeces>A command or program requested a system function that requires8BUGCHK privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,7determine the system service calls that resulted in the>error. Verify that a service or an argument was not used for a=particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.XX.>1_b-LOGNAME, transaction log name is 'file-name'ces=This message identifies the name of the transaction log file.None.YY51fi14Memory dump incomplete - dump file 1 block too smallcesin the dump file before writing out the full contents physical.memory and the dump file is 1 block too small.Expand the memory dump file.han 10 input files were listed.;Reduce the number of input files or combine them so that nomore than 10 are listed.lid arithmetic expression.>Make sure that you have used only valid operators and operandsin your expressions.SDA attempts to read thecopied from another sector that had unrecoverable read errors.;This data is written with the Forced Error Indicator set to6show subsequent readers that the data is questionable.9Be aware that the contents of the sector are only a close;approximation of the data. Use the Backup utility to make a3copy of the original file and recover its contents.d/1`cv.NOBYPASS, operation requires BYPASS privilegeces>A command or program requested a system function that requires8BYPASS privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege. ?1ps ">FORCEDEXIT, forced exit of image or process by job controllerces9The job controller detected a violation of the login hour:restrictions specified in the authorization record and has forced the process to terminate.See your system manager.-91jm"?8Memory dump incomplete - dump file 'nn' blocks too smallcesin the dump file before writing out the full contents physical8memory and the dump file is at least 2 blocks too small.Expand the memory dump file.Zn1MPlNOTAPEOP, no tape operatorces>An operation failed because no system operator is available toTo enable the native routine to call a translated routine, useThe requested CPU is not configured correctly to join into thecurrent SMP environment.4Identify the characteristics of the CPU that make it8incompatible with the other CPUs. Then modify the CPU as>necessary to allow it to pass the SMP configuration validationtests. x - 1ORFORMAT, invalid media formatces:An I/O operation failed because the data media is not in a:format that the device driver expected. If this message is8associated with a status code returned by a request to a8magnetic tape, the format specified by the last set tape8characteristics function is not implemented in the slave controller.4If the error occurred while initializing a diskette,Examine the PC and virtual address displayed in the message to.correct the instruction that caused the error.Z8C1il)l7NOCHJIB, more than one process in job; JIB not changedces;An attempt was made to assume a persona attribute for a jobAn unsuccessful attempt was made to suspend all action on yourown job.None. (;1Y\X'ILLSEQOP, illegal sequential operationces;When a sequential access device is used, such as a magnetic5tape, certain operations can be performed only at the8appropriate time. For example, the control function NEXT>VOLUME can be executed only when the tape is positioned withinthe data section.:Examine the source program to determine the logic problem. .1MP~DIRFULL, directory is fullces=An error occurred while a disk file was being created because;the directory specified is full and cannot catalog any more=entries. The maximum size of a directory file is 1024 blocks.>If associated with a network operation, this message indicates5that the directory of declared network names is full.Recode the program using the .ALIGN macro directive, or change!the byte count to an even number.]!({1Y\o'BADIRECTORY, bad directory file formatces=The specified directory file is not valid. Either the file isthe user buffer provided to receive the string, and the string is truncated.Be certain that you want to delete the directory. Then, delete9all the files in the directory first. If the directory is;corrupt, use the DCL command SET FILE/NODIRECTORY to removeits status as a directory.v"*1[^)BADISD, illegal image section descriptorces:This severe error message is associated with a status code8returned from a system service request. An illegal image#section descriptor was encountered.:The file may be corrupt or may not be an executable image.9There also could be a problem associated with the linker.Contact HP Customer Support." ,91]`+CONTROLC, operation completed under CTRL/Cces8An operation was interrupted because Ctrl/C was pressed.None.#;e01lo:BADITMCOD, specified item code is invalid or out-of-rangeces>The item code associated with an entry in the item list is not%a legal value for the system service.7Verify that the ITMCOD field for each entry in the item>contains a value that is legal for the service. Typically, theA command or program requested a system function that requires8CMEXEC privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.!!$)1Z]((BUFNOTALIGN, buffer incorrectly alignedces7A table, list, or buffer area is not correctly aligned.>If this message is associated with a status code returned by a=request to a DR32 interface, the command block address in the=data transfer command table is not quadword aligned (only forstart data transfer functions).A command or program requested a system function that requires8CMKRNL privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.''d%/1`cv.NONETMBX, operation requires NETMBX privilegeces>A command or program requested a system function that requires8NETMBX privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.(($& qt1NQ6EXASTLM, exceeded AST quotaces&*41[^P)PRIMNOSTP, PRIMARY CPU cannot be stoppedces8The STOP/CPU command was used to stop a CPU, but the CPU;cannot be stopped for one of the following reasons: 1) this=is the only CPU in the system, 2) this is the primary CPU andAn image could not continue to create a subprocess because the(process exceeded its buffered I/O quota.7If a program fails consistently because of insufficient8quotas, ask your system manager to increase your quotas.++'a]1NQNONEXDRV, nonexistent driveces>Either the drive specified in an I/O request does not exist or!the drive select plug is removed.=Verify the availability and status of the device. Also, checkthe source program for errors.,,( :f1kn9EXBUFOBJLM, exceeded systemwide buffer object page limitcesThe requested operation failed because the byte count quota ofmailboxes is created, or if a large number of windows needs to$be created to completely map a file.;Failure on window creation can occur on a $CRMPSC, $CREATE_:GFILE, $CRMPSC_FILE_64, or $CRMPSC_GFILE_64 system serviceentered, the process must be in the same group. If the process>name includes spaces or lowercase letters, enclose the name in(quotes to preserve the correct spelling.11)91jm48NOTCREATOR, request denied; user is not on creator portces=A shared memory global section may be deleted or updated onlythe section. If the processor becomes inoperative, no one owns the section.7Enter the request from the creator's processor. After a=processor becomes inoperative, it will be necessary to reboot;and reinitialize the shared memory in order to delete thosesections without owners.22)+j/1\_*SHELFERROR, access to shelved file failedcesresult, no data is available to perform the local area OpenVMS!Cluster network failure analysis.:Perform the following steps to properly define the network4description before calling SYS$LAVC_ENABLE_ANALYSIS:51 Call SYS$LAVC_DEFINE_NET_COMPONENT for each network component.92 Describe each network path used by building a list from; the component identifications (IDs) returned by SYS$LAVC_ DEFINE_NET_COMPONENT.53 Call SYS$LAVC_DEFINE_NET_PATH to define the network component lists.<4 After all network paths are defined, call SYS$LAVC_ENABLE_; ANALYSIS to enable the local area OpenVMS Cluster network failure analysis.44+(9I1Y\'BUGCHECK, internal consistency failureces8The operating system noted an internal software failure.6Collect as much information as possible and contact HPCustomer Support.55+?FH1ps>REMOTE_PROC, operation not allowed; process is on remote nodeces8You attempted an operation that cannot be performed on a remote node.1orRU=VA_NOTPAGALGN, specified virtual address is not page alignedces8The specified virtual address is not a CPU-specific page8aligned address. Or, if the specified virtual address is8within a shared page table region, the specified virtual4address is not CPU-specific page table page aligned.'NONLOCAL, device is not a local deviceces9The device name specified in a command or program requestcontains a network node name.=Verify the device name (or logical name, if a logical name is>specified) and reenter the command, specifying a device on the host system.99-WR1BPRIVINSTALL, shareable images must be installed to run privileged imageces(Two possible reasons for this error are:4o An attempt was made to run a privileged image with uninstalled shareable images.=o An uninstalled shareable image was referenced when the main9 program was installed with the /EXECUTE_ONLY qualifier.>Ask the system manager to install all shareable images used byexecutable images.::c.FD1wz1uESHMGSNOTMAP, shared memory global section not mapped during creationces7A shared memory global section creation request did not9specify a virtual address range into which the section isThe shared memory specified (that is, that part of the name to>the left of the colon [:]) is not connected to this processor.>This error also occurs when colons are inadvertently placed inthe VAX architecture has been encountered during the execution>of an image. This message indicates an exception condition and>2 "!R1SVw!EXCPUTIM, CPU time limit expiredces Your CPU time limit has expired.Examine the PC and virtual address displayed in the message to5find the break instruction that caused the exception.@@)3 $rq1UX;#EXDIOLM, exceeded direct I/O quotaces>An image cannot continue executing or a command cannot execute2because the process exceeded its direct I/O quota.7If a program fails consistently because of insufficient8quotas, ask your system manager to increase your quotas.AAg4w1y:BREAK_ARCH, unknown system break instruction fault, break; code=3D'nnn', PC=3D'location', PS=3D'xxxxxxxx'ces9An image attempted to execute a BREAK instruction with an7immediate value (code) in the range reserved by the I647calling standard for the operating system. However, the/specific code used in this case is not defined.;Examine the PC and virtual address displayed in the message=to find the break instruction that caused the exception. UserThe disk quota has been exceeded while attempting to create orextend a file.7Reduce disk usage by deleting files, or have the systemmanager increase the quota.CC5z1>BREAK_SYS, unknown architected break instruction fault, break: code=3D'nnn', PC=3D'location', PS=3D'xxxxxxxx'ces6An image attempted to execute a BREAK instruction with6an immediate value (code) in the range reserved by the9I64 calling standard for specific uses within the Itanium=architecture. However, the specific code used in this case is not defined.;Examine the PC and virtual address displayed in the message=to find the break instruction that caused the exception. User:code should not use break codes in the "architected" range9except for the specific purposes specified in the calling standard.DDN5=|s1nq`Release the current object context, examine the current object=profile to see if the update is still desired, and call $SET_SECURITY again.FF641eh3CALLUNDEFSYM, Call using undefined function symbolces7An image attempted to call a routine that is undefined,The application has supplied an illegal I/O Status Area (IOSA)address.:If possible, correct the error in the application program..71:"1be0ITEMNOTFOUND, requested item cannot be returnedces9The parameter specified in the item list cannot be found.!Verify and correct the parameter..8W1:FLTDENORMAL, denormal operand encountered, PC='xxxxxxxx', PS='xxxxxxxx'ces=An IEEE denormal operand was detected as input to a floating-9point arithmetic, conversion, or comparison operation. Bymay need to relink the executable code for the mismatched (and>probably older) configuration, possibly specifying a different;GSMATCH. Alternatively, you may have to upgrade the version:or apply a patch to OpenVMS or the application to make the=shareable image match the GSMATCH expectations of the callingimage.;For details about creating and maintaining shareable images=and for information on correctly using the GSMATCH mechanisms=of the OpenVMS Linker utility, refer to the HP OpenVMS LinkerUtility Manual..9FN1wzCEINSF_SHM_REG, insufficient shared memory region structures availablecesExamine the PC and virtual address displayed in the message to0determine the instruction that caused the error. .; R1;CPUCAP, requested CPU unable to run process due to lack of capabilitiesces>The initiating process requested a change of capabilities that>does not allow it to run on any of the CPUs in the current SMP active set.:Determine which capability prevents the process from being>executed. Either remove the capability from the process or add4it to one or more of the CPUs in the active CPU set. .}; .1_b -EXGBLPAGFIL, exceeded global page file limitces7The attempt to allocate a global section with page file:backing store failed because the systemwide limit on these7pages is exceeded. No part of the section is allocated.6Delete some similar sections or ask the system manager9to increase the SYSGEN parameter GBLPAGFIL. Then, try theoperation again..;191be^0IVACL, invalid access control list entry syntaxcesExamine the PC and virtual address displayed in the message to0determine the instruction that caused the error..<ePC1,(located at the PC address) has been emulated in the software.8The emulator is slow, so the image is not running at itsprocessor. The slowest alternative is to run a new instruction*that must be emulated on an old processor..=51LOWRITLCK, write lock errorces.1_b-NOVOLDESC, no CD-ROM volume descriptor foundces>Either an attempt was made to mount media that is noncompliant>with the ISO 9660 standard, or a CD-ROM volume descriptor with%a matching volume name was not found.;Try to determine the correct volume name by issuing a MOUNT7/OVERRIDE=IDENTIFICATION command. If this fails, notify:the manufacturer of the CD-ROM media that their product is noncompliant..>&M;1WZ%FANDLEBUSY, fandle is already in useces!:1RU Z INVCOMPID, invalid component IDces1PSE9IVADDR, invalid media addressces+This message can occur for several reasons::o An invalid disk address was specified in a physical disk read or write operation.:o A duplicate address test failed on an attempt to start a network protocol.o A hardware error occurred.2Take action appropriate to the cause of the error:8o If a programming error occurred, update the program to specify a valid disk address.4o If the error occurred on network activity, contact8 the network manager, who can do the following tests to# determine the cause of the error:8 - Test: Use the NCP command SHOW KNOWN LINES to check7 whether the user's machine has multiple LAN lines.= If so, DECnet for OpenVMS may be trying to use more than. one LAN adapter on the same extended LAN.; Action: Run DECnet for OpenVMS on only one LAN adapter per machine.; - Test: Disconnect the erring system from the LAN. Go to= another node on the LAN and set host to the erring node.; If you get a response, another system on your extended4 LAN is up and running with your DECnet address.= Action: Decide which DECnet address each system can use.: - Test: Check for a halted node that was last using the: disputed DECnet address. Such a node's LAN adapter is( still active using the LAN address.; Action: Initialize the bus or power off the machine on0 the node using the disputed DECnet address.:o If none of the above solutions applies and you suspect a. hardware error, contact HP Customer Support..~? %1VYt$CPUNOTACT, requested CPU not activeces=The current process requires system functionality that is notThis error occurs as the result of a programming decision. Theit might occur, refer to the Lock Manager discussion in the HP=OpenVMS Programming Concepts Manual or the description of the;$ENQ system service in online help or the HP OpenVMS SystemServices Reference Manual.. @Dj:1uxCGBLSEC_MISMATCH, global section type does not match service calledces=A global section type of this name already exists and it does+not match the type of section to be mapped.9Ensure that the correct global section name is specified..@%N1VY.$INVCOMPTYPE, invalid component typeces>An invalid component type value was passed to SYS$LAVC_DEFINE_NET_COMPONENT.9Use one of the component type values defined by the macro>$PEMCOMPDEF: COMP$C_NODE, COMP$C_ADAPTER, COMP$C_COMPONENT, or COMP$C_CLOUD..@[s"1$@WRONGACMODE, operation attempted from insufficiently privileged access modeces6The process had insufficient privileges to execute the;requested operations. This is an error in the user program.!Correct the error in the program. .MA QP1_8GENTRAP, software trap, code='xxxxxxxx', PC='xxxxxxxx', PS='xxxxxxxx'ces:An exception occurred as the result of executing a GENTRAPPALcode instruction.;Examine the PC location displayed in the message; check the8program listing to verify that operands or variables arespecified correctly.!!.A1$d1be0PROTINSTALL, protected images must be installedces#Protected images must be installed.the IO$_MOUNT ACP QIO function. The ACP specified is the wrong)one for the file structure being mounted.;Check the ACP specified in the DCL command MOUNT/PROCESSOR;.verify what structure you are trying to mount.$$.B.z;1_b-ILLBUFOBJ, buffer object handle is not validces>An application has passed an illegal buffer object handle to a:system service that requires a valid buffer object handle.:If possible, correct the error in the application program.%%.C51fi14ILLMODIFIER, I/O function modifier is not permittedces9An application has requested an unsupported function code8modifier with an otherwise valid Fast-I/O function. EachA command or program requested a system function that requires6OPER privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do=not request the privilege function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.''.C"R!1SV!PROTOCOL, network protocol errorces8An error occurred while attempting to initiate a networklogical link connection. Notify your software specialist.((.PD5^1fib4ILLRELPAG, invalid relative page argument specifiedces:The specified relative page argument is either larger thanprocedures guarantee that no exception can be raised after the;procedure has relinquished control. If a procedure executes;a vector instruction that might raise an exception, it must=execute a SYNC instruction (a form of MFVP instruction) priorto any subsequent CALL or RET.++.:D;C1loL:WRONGSTATE, invalid transaction state for requested eventces7The transaction is in the wrong state for the attempted operation.;If this message occurs during transaction processing and is;returned by the $ABORT_TRANS or $END_TRANS service, correctthe error in the program.:If this message occurs during other transaction processing8operations, note the conditions leading to the error andselected CPU is currently starting and cannot be stopped untilthe startup is complete.If this error was returned by the Pseudo Terminal facility, it=indicates that the buffer size supplied is illegal (less than"0 or greater than 508 characters).:Your action depends on the type of device to which the I/O7request is directed. Refer to the HP OpenVMS I/O User's,Reference Manual for additional information.:If the error was returned by the Pseudo Terminal facility,check the buffer size....F1MPCANCEL, operation canceledces8An input or output operation was canceled by the $CANCEL$CANCEL system service is requested while a block mode request9is active, then the driver performs a device reset to theDR11-W.None.//.$F $1UX06#CPUSTOPPING, CPU 'number' stoppingces8The STOP/CPU command was used to stop the specified CPU;:the CPU is in the process of stopping. However, in certain>situations, the CPU will not stop. Some multiprocessor systems>support primary CPU switching whereby a STOP/CPU command stops:the current primary CPU and causes a new primary CPU to be:selected. However, if no other CPU qualifies to become the;primary CPU, the switch will not occur, and the primary CPU3will not be stopped. This message is informational.None.00.MF1NQ_IVCHAN, invalid I/O channelces:The channel number specified in an input or output request:is not a valid channel number; the I/O operation cannot be performed.9Check for a programming error. Verify that the request tosituations, the CPU will not stop. Some multiprocessor systems>support primary CPU switching whereby a STOP/CPU command stops:the current primary CPU and causes a new primary CPU to be:selected. However, if no other CPU qualifies to become the;primary CPU, the switch will not occur, and the primary CPU3will not be stopped. This message is informational.None.22.G (Y!1Y\'EXLNMQUOTA, logical name table is fullcesDeassign logical names you no longer need to free space in thetable.3If you have sufficient privilege to modify the user9authorization file, increase the size of the logical name:table with the AUTHORIZE command MODIFY. The format of the command is:% AUTHORIZE MODIFY username/JTQUOTA=n;The variable n is the size of the job logical name table in>bytes. The default for the job logical name table size is 1024;bytes. The new value takes effect the next time you log in.:For a detached process, increase the SYSGEN parameter PQL_ DJTQUOTA.33.G?v1ps>PROXYCONVERT, old-format proxy database needs to be convertedces6The security server startup command procedure detected3an existing NETPROXY.DAT file with no corresponding9NET$PROXY.DAT file. This error occurs when the old-format>NETPROXY.DAT database file has not yet been converted to a new2NET$PROXY.DAT database following a system upgrade.5Run the conversion utility (CONVERT_PROXY) to convert5NETPROXY.DAT. (See the installation documentation for details.)44."H;%1lo4:EXITFORCED, forced exit of image or process by SYS$DELPRCces=Another process caused the image to exit using the SYS$DELPRC8system service. In this use of SYS$DELPRC, an image exit(occurs (rather than a process deletion).$None. This is a fatal error message.55.HtA18ALIGN, data alignment trap, virtual address='location',: function='location', PC='location', PSL='location'ces=An alignment fault occurred in user code, and alignment fault>reporting is enabled. If the function argument is 0, the errorThe channel number specified is currently active, or there are)no files opened on the specified channel.8Verify that the $OPEN request (to open the section file);completed successfully and returned a valid channel number.77.H9q(1jm8PROXYMISSING, old-format proxy database file is missingcesand then the old format database was deleted. The old database=is required on the system by DECnet Phase IV and many layered products.'Restore NETPROXY.DAT from backup files.88.I)kM1Z](IVACMODE, invalid access mode specifiedcesBADLOGVER, transaction log file format version is unsupportedces8The format of the transaction log file is not supported.;Use the LMCP facility to create a new transaction log file.>>.K$L'1UX#NODELETE, object cannot be deletedces8The specified process is intentionally set up so that itcannot be deleted.&Do not attempt to delete this process.??.L&%L1WZ%IVREGID, invalid region id specifiedces$The specified region does not exist.;Ensure that a proper region identification is passed to thesystem service.@@.M0KF1ad/IVREGPROT, invalid region protection specifiedces:An invalid protection was specified to the region creationsystem service.Ensure that the length passed to the system service is an evenmultiple of disk blocks.GG.)O$1UX<;#IVIDENT, invalid identifier formatces4This message can occur under either of the following conditions:6o The specified identifier is not formatted correctly.6o A system call to the $QIO system service specified a1 channel number that is outside the valid range.NOBUFOBJID, requires rights identifier VMS$BUFFER_OBJECT_USERces>The program attempted to create a buffer object from user mode=without having the VMS$BUFFER_OBJECT_USER identifier requiredfor this privileged operation.=Either write the application to create buffer objects from an;inner mode, or enable the VMS$BUFFER_OBJECT_USER identifierfor the process.3If you have been granted the VMS$BUFFER_OBJECT_USER:identifier, you may need to use this DCL command to enableit:2 $ SET RIGHTS_LIST /ENABLE VMS$BUFFER_OBJECT_USER7If you have not been granted the VMS$BUFFER_OBJECT_USER8identifier, this command will fail and you must see your:system manager. If the system manager chooses to grant you>the identifier, he or she can do so by entering this AUTHORIZEcommand:? UAF> GRANT/IDENT/ATTR=DYNAMIC VMS$BUFFER_OBJECT_USER username;Once the system manager has granted you the identifier, youFor more information about Authorize utility commands, see the#HP OpenVMS System Manager's Manual.mR 1LO/DRVERR, fatal drive errorces>If this message is returned by a request to a magnetic tape or>a disk driver, it is a drive-related error. One or more of the*following conditions can cause this error:o Drive or driver timing erroro Illegal functiono Illegal registero Operation incompleteo Register modify refused,o Write clock failure (disk driver-specific)1o Nonexecutable function (magnetic tape-specific)9o Unrecovered reproducible error (magnetic tape-specific)if the ATTN bit can be cleared, SS$_DRVERR is returned. If the=condition cannot be cleared, SS$_CTRLERR is returned. In both8cases, the driver performs a device reset to the DR11-W.>Check the status of the device and reenter the command. Verify;that the drive is on, loaded, and mounted correctly. If the,failure persists, notify the system manager.mR+1KN RESET, circuit was resetces:The virtual circuit was reset while this request was being;processed, or the circuit was in the process of being resetwhen the request was issued.*Initialize the circuit and retry the call.mS :1kn9CREATED, file or section did not exist; has been createdces=This file, section, or resource did not already exist and hasjust been created.The driver you are attempting to load is already loaded on thesystem.environment. Execute the DCL command SHOW MEMORY/BUFFER_OBJECT=and retain the output. Obtain the application source code, if*possible, and contact HP Customer Support. mT :$C1kn9DRVNOTVALID, device driver failed DPT consistency checksces#The driver is not linked correctly.9Follow the documented linking procedures for Alpha devicedrivers. mT !q1RUX EXPRCLM, exceeded process limitces9A detached process cannot be created because the creating7process has already reached its limit for the number of;detached processes it can create. This limit is established>by the MAXDETACH quota in the user authorization file (UAF) ofthe creating process.7If a program fails consistently because of insufficient8quotas, ask your system manager to increase your quotas. mnT.1_bz-RESIGNAL, resignal condition to next handlerces4A condition handler completed without terminating or8continuing the image. This message is associated with an7exit status code used by condition handling routines to;indicate that the exception dispatcher continued its search5for handlers. This message is not normally displayed.None. mU /0=1`c.DRV_NOUNLOAD, device driver is not unloadableces/The specified device driver cannot be unloaded.internally consistent and is fully subject to normal shadowing(data propagation and availability rules.None.mV&V;1WZ%NODESTQUE, no such destination queueces3In a request to the symbiont manager, the specified!destination queue does not exist.:Reenter the command, specifying a valid destination queue.muWDj1uxCINVMVIP, path switch invalid while device is in mount verificationces7A path switch was requested for a device that is in the;process of mount verification. Manual path switching is not0allowed while mount verification is in progress.3Use the SHOW DEVICE command to determine when mount5verification has completed; then reissue the command.m@W"F1SV R!NOMOREREG, no more regions foundces(for example, $ENQ or $DEQ) is not a valid lock identificationfor that process.:Check for a programming error. Verify that the $ENQ system8service request, which returned the lock identification,completed successfully.mSWT:1+eDMOUNTVER 'device-name' contains the wrong volume. Mount verification in progress.ces>The media in the named disk or tape drive has been changed andNotify the manufacturer of the CD-ROM media that their productis noncompliant.mX^;1NQNORDACC, read access deniedces9The application has attempted to read a file or device to#which only write access is allowed.:If possible, correct the error in the application program.mX;U1lo:ALLSTARTED, all configured processors are already startedces2All available CPUs in the symetric multiprocessing!configuration are already active.None.mX 1QTAIVLOGNAM, invalid logical nameceslogical name string, table name string, or equivalence string.8Logical names are limited to a length of 255 characters;9global section names are limited to 43 characters; common;event flag, process names, and cluster names are limited to<15 characters. An error can be returned when a name table is1fiH4MOUNTVER 'shadow-unit' contains zero working membersces7The named shadow set virtual unit has no working member:drives. Accompanying "possible shadow set member" messages=name previously working member drives that mount verification-expects to be returned to operational status.=Make one of the subsequently named member drives operational.m%Y;fb1lo7:NOENACURINV, not permitted to enable/disable current pathces;The user requested to enable or disable the current path to)the device. This action is not permitted.;Retry the command specifying a different path or change the%current path and reenter the command.mbY&1WZUt%IVLOGTAB, invalid logical name tableces>There is an error with the TABNAM argument. Either it containsThe single shadow set member named in the input to the primary;bootstrap program (VMB) must be returned as a member of the+system disk shadow set as soon as possible.mgY/1`cy.NOPFNMAP, operation requires PFNMAP privilegeces>A command or program requested a system function that requires8PFNMAP privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.:Verify that you did not use a service or an argument for a=particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.mZ,1]`S+NOPATHAVAIL, no selectable path for deviceces8No paths are available for this device. A switch with no;specified path description failed to locate a suitable path8for the specified device. Either the device is no longer9valid or the /NOENABLE qualifier has been used to disable all paths.:No action is required unless your device specification was9incorrect. In that case, retry the command specifying thecorrect device.mZ*#H1[^)NOSUCHPAG, specified page does not existces"The specified page does not exist.>Ensure that the proper virtual address is passed to the systemservice.m#Z.91_b5-IVLVEC, section not installed with privilegeces8A shareable image has not been installed with privilege.contain user-written system service vectors) must be installedusing the /PROTECT qualifier.mZ6~1gjq5MOUNTVER 'device-name' has aborted mount verificationcesThe named disk or tape is inaccessible to system users. Access>can be restored only by dismounting and remounting the device. mZ771PSNODEVAVL, no device availableces6An attempt was made to allocate an unavailable device.6Wait until a device is available and retry allocation.!!m [W&f1 >NOT64DEVFUNC, 64-bit address not supported by device for this functionces:This fatal error can be returned under several conditions:determine which I/O functions and device drivers can support a>64-bit buffer address. If the combination of the device drivershadow set. The name of the shadow set virtual unit appears in6an accompanying "shadow set has been reduced" message.>Correct the problem that caused the member's removal and use a5MOUNT command to return the member to the shadow set.$$m$\91NQ6IVNODNAM, invalid node nameces;DECnet for OpenVMS has detected an invalid syntax in a node>name specification; for example, the user attempted to specify0a full name on a system running DECnet Phase IV.8Retry the command using a valid node name specification.%%mg\OA18yCMOUNTVER 'device-name' has been write-locked. Mount verification in progressces:The write-locking hardware on the named disk or tape driveNOPRIV, insufficient privilege or object protection violationces=This message can occur under any of the following conditions:7o A command or program requested a system function that; requires a specific user privilege or privileges that the current process does not have.:o A program image attempted to access, modify, or delete a< control area created and owned by a more privileged access< mode. Such areas include pages in memory, I/O channels, or timer queue entries.;o A command or program requested file or volume access that is denied.interactively, verify that the particular command or qualifier9does not require a specific user privilege or privileges.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you=do not have. Or, verify that you are not attempting to modifynot request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.=Verify the file or volume name. Have the owner of the file or#volume change the protection value.++m]9-61jm8NOTINSTALL, writable shareable images must be installedces,Writable shareable images must be installed.5Install the shareable image, specifying /SHARE/WRITE.,,ml^/E1`c9~.NOTNOCNVRT, device does not do LBN addressingces:Certain Fast-I/O operations require disk drivers to access>data at the logical block number (LBN) level. This is the normEnsure that the proper virtual address is passed to the systemservice.11m_-W91^a,ALRDYSTPPD, CPU 'number' is already stoppedces=A STOP/CPU command was issued for the specified CPU, but thatCPU was already stopped.8Check whether the correct CPU number has been specified.22m>_ !c1RUP EXQUOTA, process quota exceededces8An image could not continue executing or a command couldbuffer full/empty AST. Normally, a start data transfer request4can require no more than three AST blocks at a time.=If this message is associated with a vector disabled (VECDIS):status code, the process's paging file quota prohibits the7allocation of sufficient process memory for storing itsmainline vector state.remove the member drive, but waits for the correct media to bereturned to the member drive.The requested CPU is already running as part of the active setof the SMP configuration.'None. This is an informational message.55m` 2P1cfQ1GSDFULL, global section descriptor table is fullcesA command or program requested a system function that requires:DIAGNOSE privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.88mak;1PSNOWRTACC, write access deniedces=The application attempted to write a global section, file, or,device to which only read access is allowed.:If possible, correct the error in the application program.99m a X1k2?INCOMPAT, feature incompatible with previous system version or architectureces>This message can be returned as an error or as an alternate toIf you get this message because of a version mismatch, you can>upgrade the target node so that all systems in the cluster are1running the same version of the operating system.5If you get this message because the architectures are:incompatible, there is nothing you can do. Just ignore the=message if it occurs in response to a DCL Command. If you get>the error from calling $GETJPI in a program, code your program'to carry on after getting this message.::maAd1ru5@INVEXHLIST, termination handler control block list is corruptedces=The list of exit handler control blocks is in an inconsistent1gj5MOUNTVER 'member-unit' shadow copy has been completedces=A previously initiated shadowing copy operation has finished.None.<<mka&}1WZ}%RESULTOVF, resultant string overflowces>A user buffer specified to receive data from the system is not>long enough. The system does not truncate the data because the'loss of data will damage its integrity.;Check for a programming error. Verify that character string7descriptors for output data buffers reflect the correctlengths.==mbD>S1ux COFF_NOTBLKALGN, specified offset is not virtual disk block alignedces=The specified virtual block offset is not disk block aligned.>Ensure that the virtual offset passed to the system service isdisk-block aligned.>>mb)@1Z](IVPROTECT, invalid page protection codeces;A page protection code is specified as 1 or is greater than15.Check for a programming error.??mb4N1eh3MOUNTVER 'member-unit' shadow copy has been startedces>A shadowing copy operation started with the named member driveas its target.None.@@mcC<W1tw BOFF_NOTPAGALGN, specified offset is not CPU-specific page alignedces;The specified page offset is not CPU-specific page aligned.;Ensure that the page offset passed to the system service isCPU-specific page aligned.AAmKc3v1dg]2MOUNTVER 'shadow-unit' shadow set has been reducedces9The named shadow set virtual unit had one or more members;removed, as described in previous "member has been removed" messages.=Correct the problem that caused the member's removal, and use7a MOUNT command to return the member to the shadow set.BBmc$1UXp(#OPINCOMPL, operation is incompletecesEnsure that the correct section offset is passed to the systemservice.DDmldWS1+~:MOUNTVER 'shadow-unit' shadow set has changed state. Mount verification in progress.cesA request to read a tape failed because the tape does not havestandard labels.9Verify the tape volume. Mount the tape as a foreign tape,9if necessary, to read it. If the tape is to be rewritten,*initialize it before retrying the program.]d8Q1ilo7OPINPROG, previously requested operation is incompleteces7A request could not be completed because of outstandingrequests on the service.7Note the conditions leading to the error. Make a backupA command or program requested a system function that requires8PRMCEB privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.:In either case, correct the command or program so that you=do not request the privileged function. If you determine that>you need the privilege for an application, contact your system*manager to obtain the necessary privilege.fW1AWRONGDRV, different device driver already loaded for this device type nameces;A SYSMAN IO CONNECT command specifies a device type (the dd>in ddcn:) for which a different device driver has already beenloaded.:This message can also occur if the user issues a SYSMAN IO:CONNECT command that successfully associates a nonstandard7device driver with a standard device type name and thenYou can avoid this error during autoconfiguration by not using>a standard OpenVMS device type name when loading a nonstandarddevice driver.f[I?1EPAGNOTINREG, page in the specified range is not within the specified regionces6The specified range of pages does not exist within thespecified region.>Ensure that the correct range is passed to the system service.f b1KNHANGUP, data set hang-upces>The associated terminal data set has been hung up. A Ctrl/Y or"unsolicited data AST is delivered.None.Tf~1ORfIVQUOTAL, invalid quota listcesA command or program requested a system function that requires8PRMGBL privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege. g/&B1`c.PAGNOTWRITE, specified page cannot be writtences%The specified page cannot be written.8Ensure that the correct virtual address is passed to theservice. dg/1`cv.NOPRMMBX, operation requires PRMMBX privilegeces>A command or program requested a system function that requires8PRMMBX privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege. h;FP1lo:PAGTYPVIO, operation not supported on specified page typeces:The attempted operation is not supported for the specified page type.:Ensure that the operation to be performed is legal for thespecified page type. h%."1VY$NODOMAIN, resource domain not foundces=This message can occur under any of the following conditions:7o The RSDM_ID argument passed to the $ENQ call does not9 correspond to a valid resource domain for your process.;o The RSDM_ID argument is erroneously omitted from the $ENQ call.5o The system is not running the audit server process.9Take the action that corresponds to the conditions listedabove:=o Check whether the resource domain is being passed correctly to the $ENQ call.:o Ensure that the RSDM_ID argument is included in the $ENQ call.9o If you are intentionally running the system without the< audit server, you must appropriately reconfigure the flags: for the SYSGEN parameter SECURITY_POLICY. If you are not; intentionally running without the audit server, determine8 the problem and restart the audit server using the DCL! command SET AUDIT/SERVER=START.h51fiR4UNREACHABLE, remote node is not currently reachableces4This message can occur under either of the followingcircumstances:7o An attempt was made to use $GETSYI to retrieve system: information from a remote system in the cluster, but the< remote system cannot be reached because the cluster server9 process is not present. This can occur when the node is= booting or if the node is booted in a minimum configuration< (for example, during an upgrade). The information from the, remote node is not present at these times.3o An attempt was made to initiate a network logical6 link connection. The specified node exceeded routing: requirements; that is, the path to the node contains too< many intermediate nodes. This condition will persist until, there is a change in the network topology.=If the error occurred when you issued a $GETSYI, wait for theUse the $SETPRV system service to temporarily enable DOWNGRADE:privilege for the system service call, or install the base>image with DOWNGRADE privilege. The HP OpenVMS Guide to SystemThe match control field in the section identification argument8to identify a global section contains an invalid number.;Verify that the call to the service is coded correctly. See:the HP OpenVMS System Services Reference Manual for codingspecifications.j3aR1dg2SYSVERDIF, system version mismatch; please relinkces:A SYS.STB that links the image being run is different from%that of the currently running system.flag argument. If the Create Mailbox and Assign Channel systemIf $CREPRC is called, verify that the call is coded correctly.to indicate that the exception dispatcher continued its search for handlers.None.hn [1QTzCHAINW, chained write receivedces=The block just received by the 3271 Protocol Emulator is partof a chained write sequence.7Normally, the information received by the 3271 Protocol7Emulator in a chained write sequence is appended to the:information received in the previous sequence. Your actionwill vary for each application.n1JMMBFULL, mailbox is fullces:A write request to a mailbox failed because the mailbox is>full and resource wait mode is not enabled. Its reader has notread the messages it contains.=The writer of the mailbox can wait and try to write a message>later, if possible. If the error occurs frequently, the amountincrease the size if necessary. For a queuing error, limit the-number of identifiers to the current maximum. p ! 1RU`  CTRLERR, fatal controller errorces9The exact meaning depends on the device. This message may8indicate a hardware error. If this message is associated9with a status code returned by a request to a disk driver:or magnetic tape, it indicates a controller-related error.>For example, one or more of the following conditions can cause this error: o Late datao Error confirmationo Invalid map registero Interface timeouto Missed transfero Programming erroro Read timeout6o RX01 switch set incorrectly (RX02 only) (disk driver specific)the condition indicated in the CSR can be cleared (that is, ifadditional information pertaining to this error. The following+bit values are associated with SS$_CTRLERR: XF$V_IOS_INVPTE XF$V_IOS_SBIERR XF$V_IOS_RDSERRSTARTUP request the startup failed because of bad error return8from the DEUNA hardware. On a read request, the hardwarereturned a zero-length message.:Your action depends on the type of device to which the I/OA command or program requested a system function that requires8PSWAPM privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.  qD1uxCCPUSELECTED, a selected CPU is attempting the requested transitioncesappropriate criteria; the specified command operation has been!initiated against that processor.None.!!q5kP1fi$4NOPTBLDIR, no path table or directory records foundcesNotify the manufacturer of the CD-ROM media that their productis noncompliant.""kq41ehw}3NOTMODIFIED, no pages in the section were modifiedces=The update request completed successfully without queuing anyA command or program requested a system function that requires8TMPMBX privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.((t,;1]`/+UNALIGNED, IOSA or data buffer not alignedces1An application has supplied one of the following:1o An I/O Status Area that is not quadword aligned,o A data buffer that is not 512-byte aligned:If possible, correct the error in the application program.))t&@N1WZ%NOTMPNAM, template profile not foundces8The specified template protected object profile does notexist.9Ensure that the SHOW SECURITY command specifies names forexisting templates.**/u[Lf1ABVA_NOTPAGALGN, specified virtual address is not CPU-specific page alignedces:The specified virtual address is not a CPU-specific, page-aligned address. x1PS BADPARAM, bad parameter valueces=A value specified for a system function is not valid. Several conditions can cause this error:8o If this message occurs as a result of a call to a file7 system ACP function, it indicates that parameter list options are not valid.5o If this message occurs as a result of a call to the< Formatted ASCII Output ($FAO) system service, it indicates7 that a control string contained an unknown directive.;o If this message occurs as a result of a call to a network= ACP control function, it indicates that one of the function6 parameters is out of range or has an invalid format.;o If this message is associated with a status code returned= by a request to a DR32 interface, an attempt is made to set: the data rate higher than the rate allowed by the SYSGEN parameter /XFMAXRATE.;o If this message is associated with a status code returned< by a request to a standard XADRIVER, an odd transfer count" is specified by the P2 argument.;o If this message is associated with a status code returned; by a request to a DMP11 interface, the rejected parameter7 code is given in the second longword of the IOSB. The; parameter could be rejected because it is not recognized,3 the parameter value is not legal, or the state is2 inconsistent with the requested parameter value.9o If this message is associated with turning on fallback,; fallback may not be loaded or the virtual terminal may be< disconnected. Reconnect the virtual terminal and enter the9 request again. If the FB driver is not loaded, ask your$ system manager to enable fallback.4o This message can be generated by the device driver4 interface of the QIOserver when a bad parameter is; passed to the QIOserver new unit routine under one of the following circumstances:8 - The driver does not support QIOserver (that is, the DPT$M_QSVR bit is clear).< - Both the DEV$M_QSVD and DEV$M_QSVBL bits are set in the. device characteristics or both are clear.= - Either the DEV$M_CLU bit is clear or the DEV$M_NOCLU bit* is set in the device characteristics.4o This message can be generated by the device driver8 interface of the QIOserver when an incorrect parameter< or argument is passed to the SYS$QIOSERVER system service.; This could include an incorrect item code or an incorrect= item descriptor such as an illegal size or a missing buffer address.>Using the debugger, if necessary, determine the system service9call that returned the error. Verify that the call to the:service is coded correctly. Refer to the HP OpenVMS System4Services Reference Manual for coding specifications.9In the case of a QIOserver device driver interface error,>correct the error in the device driver or in the item list andretry the operation.33Mx .}1_b_-CVTUNGRANT, cannot convert an ungranted lockces:An attempt was made to convert a lock that is not granted.=(Only locks that are granted may be converted to another lockmode.)9See the section on the lock management services in the HP9OpenVMS System Services Reference Manual and correct yourprogram.44x .:41_b-DUPDSKQUOTA, duplicate disk quota file entryces9Another quota entry for the specified UIC already exists.3Correct the UIC, or select and reenter another UIC.557x/k{1`cI.NOTNETDEV, not a network communication devicecesposition it to the desired position, if possible. If the error$persists, the tape may be defective.88Cy "n1SVU!DUPFILENAME, duplicate file nameces9The specified directory already contains an entry for the3specified file name, file type, and version number.>Delete the existing file, or correct the command or program to>{.1_b-TARGET_UNWIND, target invocation for $UNWINDces=The condition handler for the target invocation of an $UNWINDThe system disk shadow set was in an inconsistent state during;booting. The physical unit could not be added to the shadow%set for one of the following reasons:,o The shadow set is already fully populated./o The device being added is not an MSCP device.;o The geometry or other hardware properties of the physical: unit do not match those of the other shadow set members.4o The proposed shadow set member is the quorum disk.6o The physical unit is a member of another shadow set.4o The shadow set system disk has the SHADOW_SYS_DISK% parameter set to 0 instead of to 1.5Verify that the physical units for the shadow set are;configured properly and are available for mounting into the=shadow set. Be sure that the SHADOW_SYS_DISK parameter is set:to 1 to enable phase II volume shadowing. Then reenter the)command to form or add to the shadow set.CC}VM21 >MTLBLLONG, magnetic tape volume label can be no more than six characterscesExamine the PC and virtual address displayed in the message to0determine the instruction that caused the error.at runtime/and make the call only if the value is nonzero.sion block map, and fails only if it is unable*to allocate sufficient memory for the map.None.ort.|A*SYSTEM, System Servi %<1VY$INCVOLLABEL, incorrect volume labelces;The label specified does not match the label on the volume.;Verify that the correct volume is mounted; verify the label:entered. Repeat the request, specifying the correct volume;label or specifying OVERRIDE:ID, which requires either thatmailbox as read-only, write-only, or read/write (the default).:Applications using read-only or write-only channels should:anticipate this error and count on it for synchronization.;If necessary, recode your application to expect this error,=or consider using the older mailbox driver features; that is,=use read/write channels and do not use readercheck on a writeA command or program requested a system function that requires9EXQUOTA privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.  1KNDATAOVERUN, data overrunces3This message occurs under the following conditions:9o More data has been read or written into the user buffer than the user buffer can hold.7o Card reader data has been written into the controller8 data buffer before the driver has been able to receive previously sent data.;o Continued attempts to use PTD$WRITE have resulted in data9 loss because the terminal driver's type-ahead buffer is full. - You requested write access while the existing shared page+ table section allows read-only access.= - You requested read-only access while the existing shared, page table section allows write access.;Verify that the call to the service is coded correctly. See:the HP OpenVMS System Services Reference Manual for codingspecifications. v(n1Y\'ORBTOOBIG, object rights block too bigces=The object rights block (ORB) for the specified object is too/large to package and send to another subsystem.5Have your system manager use the ACL editor to remove7unnecessary access control lists (ACLs) from the object7or reorganize the ACLs. See the Security Guide for moreinformation about ACLs. 5 `Lg1G7INHCHME, inhibited CHMExecutive trap, code='xxxxxxxx',' PC='xxxxxxxx', PSL='xxxxxxxx'ces:An applications program attempted a system service that isinhibited to it.:Ask the system manager which system services are currently+inhibited and remove them from the program.kgb1}=SSAMISSING, protected subsystem identifier missing subsystem( attribute; ACL not modifiedces:An attempt was made to add a protected Subsystem ACE to an9object, but you hold the identifier without the Subsystem attribute.Check whether the existing process or global section with that:name should be deleted. If so, use the DCL command STOP to>delete the process or use the system service $DGBLSC to deletethe global section.2 ]Lg1DCINHCHMK, inhibited CHMKernel trap, code='xxxxxxxx', PC='xxxxxxxx', PSL='xxxxxxxx'ces:An applications program attempted a system service that isinhibited to it.:Ask the system manager which system services are currently+inhibited and remove them from the program.ugk1The system manager should ensure that the job controller worksAn assertion that should have been true was false at executiontime.;Examine the PC location displayed in the message; check the8program listing to verify that operands or variables arespecified correctly.7r1hk_6RMTPATH, description of path between two remote nodescesThe image performed an arithmetic or conversion operation thatresulted in an arithmetic trap.;When an arithmetic exception condition is detected, several9instructions can be in various stages of execution. These=instructions are allowed to finish before the arithmetic trap;can be initiated. Some of these instructions can themselves7cause further arithmetic traps. Thus it is possible for7several arithmetic traps to be reported simultaneously.;The Imask parameter records all integer registers that were>targets of the instructions that set the bits in the exception>summary. Bit 0 corresponds to R0, bit 1 corresponds to R1, andso on.=The Fmask parameter records all floating-point registers that9were targets of the instructions that set the bits in the=exception summary. Bit 0 corresponds to F0, bit 1 correspondsto F1, and so on.______________________________________________________________Bit>Set_____Meaning_______________________________________________Bit 0 Software Completion= All the other arithmetic exception bits were set by< floating-operate instructions with the /S software' completion trap modifier set.Bit 1 Invalid Operation3 An attempt was made to perform a floating: arithmetic, conversion, or comparison operation,< and one or more of the operand values was illegal.Bit 2 Division by Zero: An attempt was made to perform a floating divide( operation with a divisor of 0.Bit 3 Overflow7 A floating arithmetic or conversion operation. overflowed the destination exponent.Bit 4 Underflow7 A floating arithmetic or conversion operation/ underflowed the destination exponent.Bit 5 Inexact Result< A floating arithmetic or conversion operation gave8 a result that differed from the mathematically exact result.Bit 6 Integer Overflow9 An integer arithmetic operation or a conversion; operation from floating to integer overflowed the>__________destination_precision.______________________________3The PC parameter is the virtual address of the next:instruction. This is defined as the virtual address of the;first instruction not executed after the trap condition was recognized.8Check the program listing to verify that the operands or"variables are specified correctly.Re[p1d=SSFAIL, system service failure exception, status='xxxxxxxx',& PC='location', PSL='xxxxxxxx'ces>A call to a system service returned an error or a severe error9status code. The image has enabled system service failure>exception mode. This mode allows an image to signal a software=exception when a failure occurs in a system service call. The>operating system displays the failure status code, the PC, and%the PSL at the time of the exception.>Examine the PC and virtual address displayed in the message to0determine the instruction that caused the error.4:81knF9NOCONVJNL, journaling enabled; cannot extend file headerces:An application called QIO to rename a file or modify other8attributes stored in the file's header. The modification=requires ACEs currently stored in the file header to be moved=to an extension file header, but the file system has detectedAn interlocked queue is corrupt. If this message is associated=with a status code returned by a request to a DR32 interface,-an INPTQ or TERMQ interlock timeout occurred.8Determine why the queue became corrupted and correct theproblem.1MPCLIFRCEXT, CLI forced exitces4The command interpreter forced an image to terminateModify the source program, if necessary, to detect and respondto the condition.D1uxDCNOCPUMATCH, no CPU met the requirements of the requested operationces8A CPU transition request was made against any CPU in theModify the source program, if necessary, to detect and respondto the condition.!!!z1RU EXDEPTH, exceeded allowed depthcesBADRCT, replacement and caching table unrecoverable I/O errorces;The replacement and caching table is unreadable or invalid.9This message applies only to devices governed by the massname string as the equivalence name string. (Because this is a/success message, it is not normally displayed.)>Modify the source program, if necessary, to detect and respondto the condition.%%@b1qt?THIRDPARTY, network logical link disconnected by a third partyces8A network logical link has been disconnected by a system(manager at some location in the network.Reinitiate the connection.&&[+m1\_m*NORAD50, Radix 50 file name not supportedces>An attempt to read or write a component of the file name using9the Radix 50 format failed because the existing file name'cannot be expressed in Radix 50 format.>Use the RENAME command to change the existing file name to one-that can be expressed in the Radix 50 format.''$1UX#NOSUCHEXT, no such extension foundces9Either you specified a persona extension ID that does not;exist in your persona or you specified an extension name or7persona extension ID that does not exist on the system.8Either obtain the correct extension ID, and supply it as7required, or see your system manager to verify that the9specified extension name or extension ID is registered on the system.(( 'ZE1X[&FCPREADERR, file processor read errorces>An I/O error occurred when file structure data (for example, adirectory) was being read.9Examine the error log and correct the hardware problem if necessary.)))1Z](MULTRMS, multiple RMS vectors specifiedces:This severe error message is associated with a status code9returned from a system service request. Multiple RMS file;system vectors have been specified for privileged shareableimages.7Only one RMS file system vector can be specified for an7executable image. Remove the vector associated with theproblem and relink.** ,`E1]`+FCPREPSTN, file processor reposition errorcesthe item list is not writable in the access mode of the system;service caller. Typically, RETLEN contains the address of a;word that is to receive the length of the information being returned.:Verify that the RETLEN field of all item list entries that9return information points to a block of memory whose page;protection is set appropriately. This error commonly occurs:when RETLEN contains an uninitialized pointer or a virtual address of 0... *7E1[^)FCPREWNDERR, file processor rewind errorces6An I/O error occurred when a volume was being rewound.9Examine the error log and correct the hardware problem if necessary.//[?1ORNOTATBOT, tape is not at BOTces>The requested tape density was not set because the tape is notat beginning of tape (BOT).>Rewind the tape to BOT and try setting the tape density again.00 11NQDEADLOCK, deadlock detectedces;The system detected a set of processes waiting for locks in=a circular fashion (deadlock). This lock request is denied inorder to break the deadlock.unit before the unit is started in SHARED mode. The driver may=have to relink the channel control block (CCB) to a differentStart up the XE unit in SHARED mode before assigning any extrachannels to the XE unit.22 (E1Y\,'FCPSPACERR, file processor space errorces>An I/O error occurred while spaces were being skipped within a=file or files. The operating system does not normally display this message.9Examine the error log and correct the hardware problem if necessary.33 F1wzi2ENOTF11ODS5, this operation is allowed only on Files-11 ODS-5 volumesces>An application attempted to perform an operation on a Files-11;ODS-2 volume, but the operation is allowed only on Files-11An I/O error occurred when file structure data (for example, adirectory) was being written.9Examine the error log and correct the hardware problem if necessary.556Q1ORHMUSTCLOSEFL, must close fileces;No more operations can be performed on a file; for example,>because the position on a magnetic tape is lost. The file must)be closed before processing can continue.4Retry the operation; take corrective action based onpreviously reported errors.66' UhH19=DEBUG, command interpreter debugger signal at PC='location', PSL='xxxxxxxx'ces;The DCL command DEBUG is issued after Ctrl/Y interrupted an+image that is not linked with the debugger.=Link the image with the /DEBUG qualifier to enable use of the debugger.777031adI/INVLOG, transaction log file format is invalidces2The format of the transaction log file is invalid.7Note the conditions leading to the error. Make a backupIf this message is associated with a status code returned by a>request to an LPA11-K driver, a device timeout occurred. (OnlyTIMED was specified on a read operation, or a hardware timeout9occurred. IOSB+2 contains the number of bytes transferred>before the timeout occurred. If the message is associated with:a network operation, the connect request was not completedwithin the maximum time.;The action to take depends on the context of the command or8application. For example, if a timeout occurs during the:execution of a DCL command MOUNT, verify that the physical=device is ready and that the volume is properly loaded on thedevice.::R >h1ord=DECDIV, decimal divide by zero, PC='xxxxxxxx', PS='xxxxxxxx'cesDECINV, decimal invalid operand, PC='xxxxxxxx', PS='xxxxxxxx'cesExamine the PC and virtual address displayed in the message to0determine the instruction that caused the error.>> 9MG1jm8IDMISMATCH, ident mismatch with existing global sectionces8The ident is part of the global section name. An attempt9is made to create a shared memory global section using an=ident with the same name as that of an existing shared memory=section. This error occurs when an attempt is made to install=an image in shared memory (MA780) from two processors that donot have identical image files.;Copy the file from one processor to the other and retry the operation.??4PV1eh3INVLOGIN, login information invalid at remote nodeces>An unsuccessful attempt was made to initiate a network logicallink connection.A command or program requested a system function that requires7GROUP privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.,'and stack at the time of the exception.>Examine the PC and virtual address displayed in the message to0determine the instruction that caused the error.at runtime/and make the call only if the value is nonzero.sion block map, and fails only if it is unable*to allocate sufficient memory for the map.None.ort.*|Ai*rSYSTEM, System Servi5}1fip4RANGEERR, range error, PC='xxxxxxxx', PS='xxxxxxxx'ces;An exception occurred as the result of encountering a value6that was outside the range specified by the program or language.;Examine the PC location displayed in the message; check the8program listing to verify that operands or variables arespecified correctly.*+1\_*PREVDENS, tape is set to previous densitycesA command or program requested a system function that requires8GRPNAM privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.*/()1Y\A'SECREFOVF, too many section referencesces>The maximum number of references for a global section has been=reached. (A reference is counted each time a page is mapped.):The maximum number of references is 2,147,483,647 (2**31 -1).(If possible, delete any unused mappings.*'r1X[&NOHANDLER, no condition handler foundces;A request to delete an exit handler returned a warning code5indicating that the specified handler does not exist.Check for a programming error.*,1]`+OVRDSKQUOTA, disk usage exceeds disk quotaces;This message is associated with a status code returned by a=file system ACP QIO request. Disk usage exceeds the specifiedquota.None.*#Y[1TW "USERDISABLED, account is disabledces7A request was made to create a persona for a user whose authorization has been disabled.>The system manager must reenable the user's account before youcan perform this operation.*k !1RU} IDXFILEFULL, index file is fullces7No more files can be written on the volume, because theShorten the audit message; that is, reduce the number of itemsin the auditing item list. *u;1lo:NOSAVPEXC, no saved vector exception for the exception-idces=A call made to SYS$RESTORE_VP_EXCEPTION specified a value for=an exception ID that does not correspond to that of any savedvector exception state.=Correct the program call so that it uses an exception ID that:corresponds to one used by a previous call to SYS$SAVE_VP_ EXCEPTION.*%n'1VY$RSDM_ACTIVE, resource domain activeces:$SET_RESOURCE_DOMAIN was called to leave a resource domain2while the process still holds locks in the domain.&Release all locks taken in the domain.*#zZ1TW+"RSDMINUSE, resource domain in usecesLocate the programming error that caused the stack pointers tobe overwritten or modified.*<gT1mp+;PAGECRIT, page file nearly full; system trying to continueces=The system is running out of page file space. This message is(more critical than the PAGEFRAG message.:Create a new page file with more space. See the HP OpenVMSSystem Manager's Manual.*'AB1X[&RSDMNOTFOU, resource domain not foundces9The resource domain specified for this operation does notexist.6Verify that the intended resource domain was specified correctly.* &Ks1WZ%INSFARG, insufficient call argumentsces=A system service argument list contains too few arguments for the service.=Check for a programming error. Refer to the HP OpenVMS System4Services Reference Manual for coding specifications.*P3q1dgb2NOSECURITY, operation requires SECURITY privilegeces8You do not have the SECURITY privilege required for this9operation. For more information, see documentation of theSYSTEM message NOPRIV.>Contact your system manager if you think you should be granted1the privilege required to perform this operation.*U!d1RUg AUTHFAIL, authorization failureces;User authentication failed because of an invalid user name,'password, or other account restriction.9Verify that the user name and password are valid and thatEither the volume is not a Files-11 volume or it is completely unreadable.>Verify that the correct volume is mounted. Mount the volume asforeign.*@3E1qt?PAGEINSF, Installed page file count too low, system continuingces2The system's installed page file count is too low.A command or program requested a system function that requires8SETPRV privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do=not request the privilege function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.* -1^a,FILALRACC, file already accessed on channelces:The request failed because the channel over which the $QIO9IO$_ACCESS request is issued already had either a file orlogical link accessed on it.Check for a programming error. * .(.1_b-INSFLPGS, insufficient fluid pages availableces'Memory on the system has been exceeded.-Reduce the size of the section or add memory.!!* (^1Y\Y'INSFMAPREG, insufficient map registersces;This message is associated with a status code returned from:a request to an LPA11-K interface device to initialize the9LPA11-K or start data transfer. Not enough UNIBUS adapter=(UBA) map registers are available to map the command table or buffer areas.9If the map registers were preallocated when the drive was#loaded, increase the preallocation.""*T'm1X[f&BADATTRIB, bad attribute control listces9An invalid code or size is specified in the read or write2attribute list for a file system ACP QIO function.request, or the system manager did not allocate enough dynamicmemory.A command or program requested a system function that requires=IMPERSONATE privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.%%*+1\_*RDDELDATA, read deleted data address markcesAn image attempted to change a page in memory that is owned by>a more privileged access mode. For example, an image executing;in user mode attempted to delete a page owned by supervisormode.9Verify that pages referred to in system service calls are!owned by the calling access mode.***+1\_*VA_IN_USE, virtual address already in useces7A PTD$CREATE request specified a buffer address that is>already being used by another PTD$CREATE request or by another5system memory management facility such as SYS$CRMPSC.9This message can occur when the main image or a shareable:image is based. An image is based if a linker options fileA command or program requested a system function that requires7SHMEM privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.--*r1.4PAGRDERR, page read error, I/O status='xx', virtual< address='location', PC='location', PSL='xxxxxxxx'ces=The system failed to read a page from disk into memory during;a page fault operation. This message is usually followed by=a display of the condition arguments, registers, and stack at>the time the exception condition occurred. The virtual address;might indicate an address within the page that incurred the=read error, rather than the exact address being referenced atthe time of the error.;Check the status of the device and repeat the request. Also>use the DCL command ANALYZE/DISK_STRUCTURE/READ_CHECK to check>for a FORCEDERROR message on the image or in the page file. If1the failure persists, notify your system manager...* .a1_b-INSFRAME, insufficient call frames to unwindcesthe time the exception condition occurred. The virtual address;might indicate an address within the page that incurred the=read error, rather than the exact address being referenced atthe time of the error.;Check the status of the device and repeat the request. Also>use the DCL command ANALYZE/DISK_STRUCTURE/READ_CHECK to check>for a FORCEDERROR message on the image or in the page file. If1the failure persists, notify your system manager.00*9>O1orK=STRLENERR, string length error, PC='xxxxxxxx', PS='xxxxxxxx'ces9The length specified for a string was negative, or it waslarger than allowed.;Examine the PC location displayed in the message; check the8program listing to verify that operands or variables arespecified correctly.11*B1hTBPAGRDERRXM, page read error across access modes, I/O status='xx',E virtual address='location', PC='location', PS='xxxxxxxx'cesThis message is usually followed by a display of the condition9arguments, registers, and stack at the time the exception9condition occurred. The virtual address might indicate an
use the DCL command ANALYZE/DISK_STRUCTURE/READ_CHECK to check>for a FORCEDERROR message on the image or in the page file. If1the failure persists, notify your system manager.22*k`|m1}ECMODSUPR, change mode to supervisor trap, code='nnn', PC='location', PSL='xxxxxxxx'ces9An image attempted to execute a change mode to supervisor=instruction, but the image did not have a change mode handler;declared. This message indicates an exception condition andExamine the PC and virtual address displayed in the message to-determine which instruction caused the error.33* -(1^a,INSFRPGS, insufficient free pages availableces'Memory on the system has been exceeded.;This condition is sometimes transient. Retry the operation.>If you still get this error, reduce the size of the section or add memory.44*Zm1?CMODUSER, change mode to user trap, code='nnn', PC='location', PSL='xxxxxxxx'ces3An image attempted to execute a change mode to user=instruction, but the image did not have a change mode handler;declared. This message indicates an exception condition andExamine the PC and virtual address displayed in the message to-determine which instruction caused the error.55*  (Ze1Y\'INSFSPTS, insufficient SPTEs availableces;There are too few system page table entries (PTEs) to map aprocess buffer to the system.;The user action varies, depending on which operating systemyou are running.:VAX: Increase the value of the SYSGEN parameter SPTREQ andreboot the system.;Alpha: There is no SPTREQ system parameter on OpenVMS Alpha,systems. Instead, try the following actions:;o Check the size of the System Space Expansion Region using the following command: SDA> CLUE MEMORY/LAYOUT8o Check the number of free PTEs in S0/S1 virtual address$ space using the following command: SDA> SHOW PAGE/FREE/S0S12 You can try to reduce S0S1 virtual address space9 consumption by reducing the value of one or more of the following system parameters: BALSETCNT NPAGEVIR. WSMAX (only on Version 7.3-1 and earlier)$ VCC_MAXSIZE (if VCC is enabled);o Check the number of free PTEs in S2 virtual address space using the following command: SDA> SHOW PAGE/FREE/S2< You can try to reduce S2 virtual address space consumption= by reducing the size of the many consumers of S2 space. Or,8 you can try to increase the size of S2 virtual address5 space by increasing the value of the S2_SIZE system parameter.66*A;]1ru @NOSHRIMG, privileged shareable image cannot have outbound callsces>Privileged shareable images, also known as user-written system>services or protected images, cannot reference other shareable>images. This check is made when the privileged shareable image:is activated. If a reference to another image is detected,:the entire activation is aborted and this error message isissued.:Rewrite the privileged shareable image so that it does not!reference other shareable images.77* )1Z] (INSFWSL, insufficient working set limitces=A command or image cannot execute because the current working:set limit for the process is less than the number of pages=that must be resident in memory at the same time for an image to execute.>Check for a programming error; verify that the number of pages9requested in a system service request is accurate. If theretry the program. If this message is associated with a vectorMore than one NSA$_ALARM_NAME or one NSA$_AUDIT_NAME item codewas present in the item list.9Specify only one security audit alarm or audit name in anauditing item list.::*SX1KNNOSLOT, no PCB availableces:The maximum number of processes that can be created at onetime has been exceeded.7Wait for another process to be deleted, or increase theMAXPROCESSCNT system parameter.;;*P/[1`cb.NOTVOLSET, volume is not part of a volume setces=An attempt is made to reference a specific volume in a volume7set, through the file ID or placement control, when the-specified volume is not part of a volume set.;Verify that the correct device name is specified, or removethe volume-specific reference.<<*.  P1GJ @ PARITY, parity errorcesIf this message is associated with a status code returned by a>request to a DR11-W interface, a parity error is detected in a=block mode transfer when the buffered data path of the UNIBUSadapter is purged.9If this message is associated with a status code returned9by a request to a DR32 interface, either the microcode is9not loaded successfully or the DR32 controller detected a9parity error and a hardware malfunction is indicated. The;second longword of the I/O status block contains additional1gj5BADBUFADR, buffer address is invalid or inaccessibleces8This message can occur under either of these conditions:8o The buffer address associated with an entry in an item5 list is not readable or writable in the access mode5 of the system service caller. The particular access= required varies for each item code and for different system; services. This error commonly occurs when BUFADR contains5 an uninitialized pointer or a virtual address of 0.;o If this message occurs when using Fast-I/O, an I/O buffer6 is not located entirely within its associated buffer9 object. This is a problem with the application program.;In the first case, verify that the BUFADR field of all item>list entries points to a block of memory whose page protectionis set appropriately.:In the Fast-I/O case, correct the error in the applicationprogram if possible.>>*,1]`+NOSOLICIT, interrupt message not solicitedces7The program attempted to send an interrupt message to a:partner on a remote node, but the DECnet implementation on&that node has not solicited a message.Wait and retry the request.??*^ b[1p :VARITH, vector arithmetic fault, summary='xx', mask='xx',& PC='location', PSL='xxxxxxxx'ces=A vector operate instruction, executing within the context of>the current context, resulted in a vector arithmetic trap. The=message indicates an exception condition and is followed by a1register and stack dump to help locate the error.7The summary item is a longword mask, the bits of which,;when set, signify the following vector arithmetic exception conditions:o Bit 0 = floating underflowo Bit 1 = floating divide by 0#o Bit 2 = floating reserved operando Bit 3 = floating overflowo Bit 5 = integer overflow=The mask item is a longword, the bits of which (0 through 15)=correspond to the VAX vector registers (V0 through V15). When=set, a bit indicates that an element of the associated vector=register was involved in an operation that caused one or morethe exception), and the processor status longword (PSL) at the time the exception was reported.>One or more of the following debugging strategies may help you>determine which calculations resulted in the reported error orerrors:2o Recompile the source with the /DEBUG, /NOVECTOR,< /CHECK=BOUNDS qualifiers; relink using the /DEBUG and /MAP9 qualifiers; and run the resulting scalar image with the8 /DEBUG qualifier. A scalar arithmetic exception should: occur at the calculation that caused the original vector arithmetic exception.;o Recompile the source using the /DEBUG, /LIST, and /VECTOR: qualifiers; relink using the /DEBUG and /MAP qualifiers;< and run the resulting image with the /DEBUG qualifier. Use= the SET VECTOR_MODE SYNCHRONIZED or the SYNCHRONIZE VECTOR_8 MODE debugger command to guarantee that all exceptions; resulting from vector operations are delivered before the< execution of the next scalar instruction. Step through the: program, inspecting the contents of the vector registers$ involved in each vector operation.; When a vector operate instruction causes a floating-point8 exception in a vector element, the exception result is; encoded into the corresponding element of the destination7 register. When the destination vector register is the; target of an EXAMINE/FLOAT debugger command, the debugger: displays the decoded exception message in the associated vector element.5 When a vector operate instruction causes an integer9 overflow in a vector element, the corresponding element= of the destination register contains a value that is larger; than 32 bits. When the destination vector register is the= target of an EXAMINE debugger command, inspect each element for a value larger than 2[32].@@*^K1BCREATED_SHPT, section did not exist; has been created with shared page tablesces=The named global section was successfully created with shared page tables.None.amine the PC and virtual address displayed in the message to0determine the instruction that caused the error.at runtime/and make the call only if the value is nonzero.sion block map, and fails only if it is unable*to allocate sufficient memory for the map.None.ort.i}=iSYSTEM, System Servi?1psA>BADBUFLEN, specified buffer length is invalid or out-of-rangeces5The length specified for an entry in the item list is;inappropriate in the context of that call. The length might;be invalid (for example, 0), or the length might be outsidethe range of acceptable values.7Verify that the BUFLEN field for each entry in the itemlocked when it is accessed with FIB$M_DLOCK (bit) set and then&deaccessed without writing attributes.>Unlock the file with the DCL command UNLOCK and examine it forinconsistency.il$Q1UX~#NOIOCHAN, no I/O channel availableces:The process exceeds the number of I/O channels that can beassigned at one time.7Deassign another channel, or close a file and retry the;operation. Check for a program error that fails to deassign8channels or close files. Also check the SYSGEN parameter'CHANNELCNT to see if it is high enough.i11beW&0TOOMANYLNAM, logical name translations exceededces8This message can occur for one of the following reasons::o Ten translations were performed on the logical name, but# the name has not been translated.=o An attempt was made to create a logical name with more than 128 equivalence names.7For the first case noted under Explanation, display allFor OpenVMS Alpha Version 7.0 and later, VIRTUALPAGECNT is not>a factor. If you change the value of the VIRTUALPAGECNT systemarchitectural maximum of two billion bytes (the total capacity0of P0 and P1 space), less any existing contents.i!/J1RU TOOMANYREDS, too many redirectsces.This call is redirected more than eight times.The logical block number specified does not exist on the disk.=If this error results from a Files-11 I/O operation, the filestructure is damaged.9Check for a programming error. If this error results from5a Files-11 I/O operation, repair the volume using theAnalyze/Disk_Structure utility.i141be0NOUPGRADE, operation requires UPGRADE privilegeces3The requested operation requires UPGRADE privilege.or points back to the beginning of the item list in which this entry occurs.9Verify that the BUFADR field of the chain item list entry=points to a block of memory whose page protection is readablereturned from a system service request. An invalid change mode!or message vector is encountered.*Correct the change mode or message vector.i 1MPENDOFVOLUME, end of volumeces;Two consecutive tape marks were detected during a skip file;operation to a tape mounted non-file-structured or during awithin the volume and not the end of the volume. The high word:of the first longword in the I/O status block contains thenumber of tape marks passed.=Use a read function to read data located past the double tapeaccessing a disk that was initialized on Version 7.2 or later.9Version 7.2 extends the size of the BITMAP field and this5increased size is incompatible with earlier versions.=Verify that the correct physical volume is mounted, or repair;the volume using the Analyze/Disk_Structure utility. If theVerify that the size of BITMAP.SYS is less than 256 blocks. If=it is not and you want to access this disk from a pre-Version>7.2 system, you must copy the data to a disk with a BITMAP.SYS>that is less than 256 blocks. If you use BACKUP/IMAGE, be sure'to include the /NOINITIALIZE qualifier.ip1MPRPARTESCAPE, partial escapeces;A terminal escape sequence is only partially stored because6the buffer space was exhausted before the sequence was9complete. The type-ahead buffer contains the remainder of:the escape sequence unless the terminal line had the TT$M_NOTYPEAHD characteristic.the RMS file system) has been updating the file using recoveryfile must be made consistent or, in an emergency, the recoveryunits must be turned off.;If the file is still accessed by another facility, stopping=the applications using the facility should return the file to>a consistent state. For RMS files, closing the file or runningprocedure for the facility that has recovery units on the filequalifiers to turn off recovery units. For example, if the RMS>file system has active recovery units on the file EXAMPLE.DAT,The operation that a system facility attempted on a connection4is illegal for the current state of that connection.Contact HP Customer Support.iQ [19VECDIS, vector disabled fault, code='xx', PC='location', PSL='xxxxxxx'ces=The current process issued a vector instruction that requires7an idle vector processor to become active. Under normal;circumstances, this event is not reported to a system user.8However, if the vector processor was originally disabled;due to some error involving the current process, the VECDIS:message is issued in association with one of the following messages::o BADCONTEXT - The vector state of the mainline routine is! corrupt and cannot be restored.7o CPUNOTACT - The VAX system contains no vector-present5 processor on which to schedule the current process.8o EXQUOTA - The OpenVMS operating system cannot allocate; sufficient space to save the vector state of the mainline5 routine because the process in which the routine is/ executing exceeded process paging file quota.:o INSFMEM - Insufficient nonpaged dynamic memory exists to2 turn the current process into a vector consumer.8o INSFWSL - The OpenVMS operating system cannot allocate; sufficient space to save the vector state of the mainline9 routine because the working set limit of the process in, which the routine is executing is too low.The specified process requested a CPU capability that does notexist.:Modify the requesting image to request a valid, recognizedprocess capability.ih/g1`cz.SUBLOCKS, cannot dequeue a lock with sublocksces;A programming error occurred because an attempt was made to*dequeue a lock that had sublocks under it.;Correct the programming error and retry. (Note that you may8use the flag bit LCK$M_DEQALL on the $DEQ system service:request to dequeue all the locks for a given access mode.)iJ'1X[?\&BADCHECKSUM, message checksum failureces;An OpenVMS Cluster node has received a service request that9contains user or object security profile information with;questionable data integrity. The request cannot be serviced1without potentially compromising system security.Contact HP Customer Support.iMZC1_BSUBRNG, arithmetic trap, subscript out of range at PC='xxxxxxxx', PS='xxxxxxxx'ces7A subscript out of range caused an arithmetic exception condition.;Examine the PC location displayed in the message, and checktributary is dead if the SM$V_STS_ACTIVE bit is clear.) If the)tributary is dead, restart the tributary.((i22np1cfD1LCKPAGFUL, no more pages may be locked in memorycesThe $END_TRANS service returns this message when a transaction;aborts. The reason for the abort is specified in the reason&code returned in the I/O status block.4Take action based on the reason code, then retry the transaction.,,i7@K1qtI?SUBRNG5, subscript 5 range error, PC='xxxxxxxx', PS='xxxxxxxx'ces9The fifth subscript of an array reference was outside thedeclared bounds.;Examine the PC location displayed in the message; check the8program listing to verify that operands or variables arespecified correctly.--i )^21Z](FILNOTACC, file not accessed on channelces=The process is trying to read or write to a channel that doesnot have a file accessed on it.1Modify the source program to correct the problem...i7@K1qtI?SUBRNG6, subscript 6 range error, PC='xxxxxxxx', PS='xxxxxxxx'ces9The sixth subscript of an array reference was outside thedeclared bounds.;Examine the PC location displayed in the message; check the8program listing to verify that operands or variables arespecified correctly.//i +R;1\_*ILLDESQUE, illegal destination queue nameces3In a request to the symbiont manager, the specifieddestination queue is invalid.:Reenter the command, specifying a valid destination queue.00i9@M1qtK?SUBRNG7, subscript 7 range error, PC='xxxxxxxx', PS='xxxxxxxx'ces;The seventh subscript of an array reference was outside thedeclared bounds.;Examine the PC location displayed in the message; check the8program listing to verify that operands or variables arespecified correctly.11ik<*1mpS};TOOMUCHDATA, too much optional or interrupt data specifiedces9This message can occur under the following circumstances:5o A network interrupt message was rejected because it& contains more than 16 bytes of data.=o On a write request, the DEUNA hardware incorrectly read the; value for the buffer size because the DEUNA device driver7 previously verified that the buffer size was correct.:o An attempt to declare an additional DECnet object failed< because the maximum number of objects allowed by the local DECnet node already exists.A virtual address specified in a system service call is beyond3the end of the process's program or control region.:Check for a programming error. Verify that the call to theservice is coded correctly.33i0-1ad/NOLICENSE, operation requires software licenseces6A function is being requested that requires a software;license. This function cannot be done until the license kit is installed.,Buy the license and install the license kit.44i 0HR1ad/FILNOTCNTG, file is not contiguous as requiredces;A system file that must be in contiguous disk format is not contiguous.ILLEGAL_SHADOW, illegal formed trap shadow, Imask='xxxxxxxx',? Fmask='xxxxxxxx', summary='xx', PC='xxxxxxxx', PS='xxxxxxxx'ces>The instruction sequence does not obey the rules stated in theALIAS MAXIMUM LINKS parameter is also specified, in which caseEither an attempt was made to mount media that is noncompliant>with the ISO 9660 standard, or a CD-ROM volume descriptor with%a matching volume name was not found.5Try to determine the correct volume name by issuing ahas been lost and the I/O request packet (IRP) has been marked>NORETRY, causing the I/O request represented by this IRP to beThe UNIBUS should be checked to make sure it is not overloaded8and that all devices on the UNIBUS are working properly.<<i Q1NQ0DEVACTIVE, device is activecesbecause there is an active data transfer request (only for theload microcode function).>If this message is associated with a status code returned by aModify the source program, if necessary, to detect and respondto the condition. to0determine the instruction that caused the error.at runtime/and make the call only if the value is nonzero.sion block map, and fails only if it is unable*to allocate sufficient memory for the map.None.ort.x{DSYSTEM, System ServivQ1KNNOSUCHFILE, no such filecesModify the source program, if necessary, to detect and respondto the condition.d/1`cv.NOVOLPRO, operation requires VOLPRO privilegeces>A command or program requested a system function that requires8VOLPRO privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.T&1@SUBTRACED, protected subsystem image cannot be linked /TRACE or /DEBUGces;An attempt was made to activate an image with an associated=protected Subsystem ACE that was linked with either traceback:information or a debug symbol table. For security reasons,9protected subsystem images cannot contain either of thesetypes of records.%Link the image /NOTRACE and /NODEBUG. 4L1eh3DEVALLOC, device already allocated to another usercesOn a startup request, the user attempted to start the protocoldetermine whether the identifier exists or use SHOW [username]to see if the user exists.9You must create an identifier (using either the AUTHORIZE7command ADD/IDENTIFIER or another program that uses the:appropriate system security services) before you can grant9or revoke an identifier's usage or before you can add the:identifier to or remove it from a process or system rightslist. ?$P1ps>TPDISABLED, the TP_SERVER process is not running on this nodeces#DECdtm services have been disabled.=Enable DECdtm services, as described in the HP OpenVMS SystemManager's Manual. ;`91lo:NOLISTENER, specified remote system process not listeningces:A system facility attempted to connect to a remote process$that is not enabled for connections.8Ensure that the remote process is receiving connections.  )1Z](DEVASSIGN, device has channels assignedces>A request to deallocate a device failed because the device has;I/O channels assigned to it; that is, it is currently beingread or written.:Verify the device name (or logical name, if a logical name=is specified) and reenter the command with the correct device>name. If any executing subprocesses are using the device, wait>until they have terminated before attempting to deallocate thedevice. :.1kn$9LINEABRT, host aborted transmission or failed to respondces;The IBM host either aborted the current transmission with amessage after several attempts, the line is probably defectiveand/or unusable.D1HKINVUSER, no such usercesaccount in SYSUAF.DAT and that the ExtAuth flag is set for the;user. For locally authenticated users, ensure that the username exists in SYSUAF.DAT.a-1^as,NOWORLD, operation requires WORLD privilegeces>A command or program requested a system function that requires7WORLD privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.2$~n1UXD#SUPERSEDE, logical name supersededces9A request to place a logical name in a logical name table{1orm=INTERLOCK, unable to acquire system data structure interlockces7The system data structure interlock cannot be acquired.7Another processor probably crashed while holding a datastructure lock.:Retry the operation, or reboot the system and reinitialize7shared memory. Refer to the HP OpenVMS System Manager'sManual.6D1gj5NOWRITER, no write channel is assigned to the deviceces:This message can be returned under either of the following conditions:mailbox as read-only, write-only, or read/write (the default).:Applications using read-only or write-only channels should:anticipate this error and count on it for synchronization.;If necessary, recode your application to expect this error,=or consider using the older mailbox driver features; that is,An image file that is read-only contains a writable section. A7writable section cannot be created to a read-only file.9Close and open the file correctly. If the Install utility:returns this error, reenter the command and use the /WRITE.qualifier in addition to the /SHARE qualifier.U1 ATRANSCALLER, routine at 'address' cannot be called by translated codeces:The autojacketing routine EXE$TRANSLATED_TO_NATIVE aborted=the user program. The native routine at the specified address;cannot be called by a translated routine because the nativewithin a shared page table region, the specified length is not=an even multiple of CPU-specific page table pages or does not,include the last page in the global section.>Ensure that the length passed to the system service is an even:multiple of CPU-specific pages. Or, if the specified range:of virtual addresses is within a shared page table region,IO SHOW DEVICE to display the devices connected to the system,.their device drivers, and their I/O databases.7N1hk6LINKDISCON, network partner disconnected logical linkcesCONCEALED, logical device name concealed physical device nameces9The system service completed successfully, and the device=name that is supplied as input to the service translated to aconcealed device.None.z" ,1SV`!LINKEXIT, network partner exitedcesto a node that either is not part of the cluster or is unknownto the network ACP.;Check the node name specification. Use the DCL command SHOW8CLUSTER to verify the status of OpenVMS Cluster nodes orA Files-11 operation was attempted on a device that is mountedforeign.requested conflicts with the current file access. This message8is also returned when an execute-only shareable image is7referenced in the context of a main program that is not+installed with the /EXECUTE_ONLY qualifier.'Possible actions include the following:is unknown, or the command file used to start the object could not be found..Contact the system manager of the remote node.&&|%V1VY$NSTPPD, CPU 'cpu-id' is not stoppedces=The STOP/CPU command failed to stop the specified CPU for oneof the following reasons:#o It is the only CPU in the system.4o It is the primary CPU and primary switching is not supported.;o The primary CPU has a capability that no other CPU in the< system provides; therefore, primary switching cannot occur even if it is supported.6If primary switching is supported, but the primary CPU9cannot be switched because no other CPU provides the same7capabilities, you can stop the primary CPU by using the5STOP/CPU command with the /OVERRIDE_CHECKS qualifier.''H UD1ZRequest the page fault monitor only once per image invocation,&or wait until the other user finishes.++` d1LOrDEVINACT, device inactiveces8You tried to perform an activity that cannot be properly*performed until the device unit is active.>Start the controller before doing any tributary requests. Make;sure that the QIO STARTUP has finished successfully or that:the XE device has not shut down the unit due to a hardwarefailure.,,+4li1eh=3SECTBLFUL, process or global section table is fullces8The system space allocated to maintain information about2sections is full; no more sections can be created.:If you have created many private sections, you may have tosection - is being created, this message may indicate that not>enough space is allocated at system generation for the section4tables. Notify the system manager of the deficiency.--W &P1WZi%ILLIOFUNC, illegal I/O function codeces6A function code in an explicit input/output request is4invalid. Or, if the errors occurred during a network;operation, the user attempted a synchronous disconnect withoutstanding transmits.:Check for a programming error. Locate the invalid functioncode and correct it... @1qt ?INTOVF_F, integer overflow fault, PC='xxxxxxxx', PS='xxxxxxxx'ces6An integer overflow occurred on an OpenVMS Alpha CVTQL7or CVTGQ instruction, and integer overflow reporting is&explicitly enabled in the instruction.;Examine the PC location displayed in the message. Check theA command or program requested a system function that requires6ACNT privilege; the current process does not have this privilege.2If the message is in response to a command entered7interactively, verify that a command or a qualifier was:not used for a particular command that requires a specific privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do=not request the privilege. If you determine that you need the=privilege for an application, ask your system manager to giveyou the necessary privilege.00U(1Y\g'VOLINV, volume is not software enabledces1ORGBEGOFFILE, beginning of fileces=A backspace operation backed up to the beginning of the file.8If you are reading backwards or backspacing a tape, this8message indicates that the end-of-the-data area has been9reached. Modify the program to recognize and correct this condition.33:7J1hkL6ACCQUOTA, ACCOUNT had inadequate quota at remote nodeces8An attempt to initiate a network logical link connection7failed. The target object is already using its quota of%logical links or some other resource.7This condition is usually temporary. Try initiating theconnection later.44 %1VY$DEVMOUNT, device is already mountedces7The device specified has a volume mounted and cannot be9allocated, or a volume is already mounted on a device for+which a mount request is previously issued.:Verify the device name (or logical name, if a logical name=is specified) and reenter the command with the correct device=name. If the device name is correct and if the volume that is>mounted can be dismounted, dismount the volume and reenter therequest.55 |?1NQ EOTIN, EOT response to textces1The IBM system sent an EOT instead of an expected:acknowledgment to XKDRIVER after receiving a block of datafrom XKDRIVER.7Either a normal condition exists where the IBM host has7acknowledged the receipt of a block of text with an EOT;instead of an ACK (in this case, you do not need to provide;corrective action), or an error has occurred. When an error=occurs, you may need to correct and retransmit the last blockof data to the IBM host.66  #I1TW"DEVNOTALLOC, device not allocatedces=The device specified in a deallocate request is not currently allocated.:Verify the device name (or logical name, if a logical name=is specified) and reenter the command with the correct devicename.77w%W1VY$NOSUCHSEC, no such (global) sectionces>The global section name specified in a request to map a globalsection does not exist.7Verify that the program that creates the global section:successfully created the section, and that the section has;not been deleted. Also, check that the logical name strings)specifying the global section name match.885~1fi4NODELPERMANENT, permanent persona cannot be deletedces9The $PERSONA_DELETE system service detected an attempt to8delete a permanent persona. Currently the only permanent6persona is the process's login persona (persona ID 1).6Modify the user code that performs the $PERSONA_DELETE=system service so it does not attempt to delete the permanentpersona.99pI14ACCVIO, access violation, reason mask='xx', virtual: address='location', PC='location', PSL='xxxxxxxx'ces=An image attempted to read from or write to a memory location5that is protected from the current mode. This message>indicates an exception condition and is followed by a register;and stack dump to help locate the error. The reason mask is9a longword whose lowest 5 bits, if set, indicate that the=instruction caused a length violation (bit 0), referenced the=process page table (bit 1), attempted a read/modify operation8(bit 2), was a vector operation on an improperly aligned=vector element (bit 3), or was a vector instruction reference to an I/O space address (bit 4).space permits. For example, the automatic user stack expansion8algorithm reports an access violation with the following:two conditions (which should serve as hints that automaticexpansion has failed):=o The reason mask has the low-order bit set. This indicates a; memory reference that is not described in any page table.:o The relatively small P1 address space virtual address is referenced.reported virtual address may be some other address in the same=page as that address to which the access was attempted. Check:the program listing to verify that instruction operands or%procedure call arguments are correct.The transaction identifier (TID) specified in the user programwas not found.-Check the user program and correct the error.;;O5]1fia4NOEXTAUTH, external authentication is not availableces;External authentication is not available for authentication>H=1nqLZoutside the security domain of the receiving node. The request:cannot be serviced without potentially compromising system security.:Make sure that all OpenVMS Cluster nodes refer to the same1rights database file (SYS$SYSTEM:RIGHTSLIST.DAT).BBj31dg|2NOALLSPOOL, operation requires ALLSPOOL privilegeces>A command or program requested a system function that requires:ALLSPOOL privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.CCn=1nqModify the source program, if necessary, to detect and respondto the condition. to0determine the instruction that caused the error.at runtime/and make the call only if the value is nonzero.sion block map, and fails only if it is unable*to allocate sufficient memory for the map.None.ort.#&SYSTEM, System Servi>1or=NOMEMRESID, requires rights identifier VMS$MEM_RESIDENT_USERces8The program attempted to create a memory-resident global;section without having the VMS$MEM_RESIDENT_USER identifier'required for this privileged operation.If you have been granted the VMS$MEM_RESIDENT_USER identifier,:you can enable the identifier by issuing the following DCLcommand:1 $ SET RIGHTS_LIST /ENABLE VMS$MEM_RESIDENT_USER7This DCL command fails if you have not been granted the8VMS$MEM_RESIDENT_USER identifier. If your system manager9chooses to grant you this identifier, he or she can do so,by entering the following AUTHORIZE command:; UAF> GRANT/ID/ATTR=DYNAMIC VMS$MEM_RESIDENT_USER username;Once the system manager grants you the identifier, you must:log out and then log back in for your process to have this8identifier. For more information about Authorize utility8commands, see the HP OpenVMS System Management UtilitiesReference Manual.(`+1Y\'ACLEMPTY, access control list is emptyces>The access control list for an object contains no entries on a read, find, or delete operation.*Take action appropriate to your intention.S aF1e7FLTDIV_F, arithmetic fault, floating divide by zero at( PC='xxxxxxxx', PSL='xxxxxxxx'ces8During a floating-point operation, an attempt is made to divide by 0.;Examine the PC location displayed in the message; check the8program listing to verify that operands or variables arespecified correctly.CF1GJUACLFULL, ACL is fullcesFLTINE, floating inexact result, PC='xxxxxxxx', PS='xxxxxxxx'ces7The IEEE floating-point Inexact trap was enabled, and a4floating-point operation produced an inexact result.;Examine the PC location displayed in the message; check the8program listing to verify that operands or variables arespecified correctly.3Wr1dg02NOMBX, no associated mailbox for inbound connectsces:A channel specified for network operations does not have amailbox associated with it.=Correct the source program to create a mailbox, and associate3the mailbox with the channel on the assign request.a @q1qts?FLTINE_F, floating inexact fault, PC='xxxxxxxx', PS='xxxxxxxx'ces;A floating arithmetic or conversion operation gave a result4that differs from the mathematically correct result.;Examine the PC location displayed in the message. Check theA command or program requested a system function that requires8ALTPRI privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege. 8 $b1UXJ#DEVNOTMBX, device is not a mailboxces;An I/O channel specified in a system service request is not>currently assigned to a mailbox. The service requires that thedevice be a mailbox.=Check for a programming error. Verify that the channel number#specified for the service is valid.  B1svAFLTINV, floating invalid operation, PC='xxxxxxxx', PS='xxxxxxxx'ces;An arithmetic exception occurred as the result of operating=on a nonfinite floating-point number or attempting an invalid"operation such as 0/0 or SQRT(-1).;Examine the PC location displayed in the message; check the8program listing to verify that operands or variables arespecified correctly. @#1qt?MCHECK, detected hardware error, PC='location', PSL='location'ces"A hardware machine check occurred.Notify the system manager. %?1LOtNOSUCHVOL, no such volumeces$The specified volume does not exist.>Verify the specified volume name, and correct it if necessary. 9 $N1UXK#DEVNOTMOUNT, device is not mountedces8This message is displayed when you issue the DCL command>DISMOUNT for a device that is not mounted, or when you attempt,an operation that requires a mounted device.9Reenter the command with the mounted device, or mount thedevice in question.m @1qt?FLTINV_F, floating invalid fault, PC='xxxxxxxx', PS='xxxxxxxx'ces6One or more illegal operand values were detected on an;attempt to perform a floating-point arithmetic, conversion,or comparison operation.When an ACP started, it was unable to locate its queue header.7This error is the result of running an ACP with the DCL command RUN.In the first case, reenable or repair the device and retry the operation.4In the second case, make sure the XE device has been9configured as ONLINE. Also, make sure that all parameters>in the QIO STARTUP request are supplied, including NMASC_PCLI_PTY. +1\_2*MCNOTVALID, device microcode is not validcesRepair the volume using the Analyze/Disk_Structure utility and#recover the file from backup media.W WT1i>FLTUND, arithmetic trap, floating underflow at PC='xxxxxxxx', PSL='xxxxxxxx'ces9An arithmetic exception condition occurred as a result offloating-point underflow.;Examine the PC location displayed in the message; check the8program listing to verify that operands or variables arespecified correctly.-@81^a,NOMOREACE, access control list is exhaustedces4The end of the ACL was encountered on a read or find operation.7The user or application should take appropriate action.ockces7The system data structure interlock cannot be acquired.7Another processor probably crashed while holding a datastructure lock.:Retry the operation, or reboot the system and reinitialize7shared memory. Refer to the HP OpenVMS System Manager'sManual.6D1gj5NOWRITER, no write channel is assigned to the deviceces:This message can be returned under either of the following conditions:mailbox as read-only, write-only, or read/write (the default).:Applications using read-only or write-only channels should:anticipate this error and count on it for synchronization.;If necessary, recode your application to expect this error,=or consider using the older mailbox driver features; that is,An image file that is read-only contains a writable section. A7writable section cannot be created to a read-only file.9Close and open the file correctly. If the Install utility:returns this error, reenter the command and use the /WRITE.qualifier in addition to the /SHARE qualifier.U1 ATRANSCALLER, routine at 'address' cannot be called by translated codeces:The autojacketing routine EXE$TRANSLATED_TO_NATIVE aborted=the user program. The native routine at the specified address;cannot be called by a translated routine because the nativewithin a shared page table region, the specified length is not=an even multiple of CPU-specific page table pages or does not,include the last page in the global section.>Ensure that the length passed to the system service is an even:multiple of CPU-specific pages. Or, if the specified range:of virtual addresses is within a shared page table region,IO SHOW DEVICE to display the devices connected to the system,.their device drivers, and their I/O databases.7N1hk6LINKDISCON, network partner disconnected logical linkcesCONCEALED, logical device name concealed physical device nameces9The system service completed successfully, and the device=name that is supplied as input to the service translated to aconcealed device.None.z" ,1SV`!LINKEXIT, network partner exitedcesto a node that either is not part of the cluster or is unknownto the network ACP.;Check the node name specification. Use the DCL command SHOW8CLUSTER to verify the status of OpenVMS Cluster nodes orA Files-11 operation was attempted on a device that is mountedforeign.requested conflicts with the current file access. This message8is also returned when an execute-only shareable image is7referenced in the context of a main program that is not+installed with the /EXECUTE_ONLY qualifier.'Possible actions include the following:is unknown, or the command file used to start the object could not be found..Contact the system manager of the remote node.&&|%V1VY$NSTPPD, CPU 'cpu-id' is not stoppedces=The STOP/CPU command failed to stop the specified CPU for oneof the following reasons:#o It is the only CPU in the system.4o It is the primary CPU and primary switching is not supported.;o The primary CPU has a capability that no other CPU in the< system provides; therefore, primary switching cannot occur even if it is supported.6If primary switching is supported, but the primary CPU9cannot be switched because no other CPU provides the same7capabilities, you can stop the primary CPU by using the5STOP/CPU command with the /OVERRIDE_CHECKS qualifier.''H UD1ZRequest the page fault monitor only once per image invocation,&or wait until the other user finishes.++` d1LOrDEVINACT, device inactiveces8You tried to perform an activity that cannot be properly*performed until the device unit is active.>Start the controller before doing any tributary requests. Make;sure that the QIO STARTUP has finished successfully or that:the XE device has not shut down the unit due to a hardwarefailure.,,+4li1eh=3SECTBLFUL, process or global section table is fullces8The system space allocated to maintain information about2sections is full; no more sections can be created.:If you have created many private sections, you may have tosection - is being created, this message may indicate that not>enough space is allocated at system generation for the section4tables. Notify the system manager of the deficiency.--W &P1WZi%ILLIOFUNC, illegal I/O function codeces6A function code in an explicit input/output request is4invalid. Or, if the errors occurred during a network;operation, the user attempted a synchronous disconnect withoutstanding transmits.:Check for a programming error. Locate the invalid functioncode and correct it... @1qt ?INTOVF_F, integer overflow fault, PC='xxxxxxxx', PS='xxxxxxxx'ces6An integer overflow occurred on an OpenVMS Alpha CVTQL7or CVTGQ instruction, and integer overflow reporting is&explicitly enabled in the instruction.;Examine the PC location displayed in the message. Check theA command or program requested a system function that requires6ACNT privilege; the current process does not have this privilege.2If the message is in response to a command entered7interactively, verify that a command or a qualifier was:not used for a particular command that requires a specific privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do=not request the privilege. If you determine that you need the=privilege for an application, ask your system manager to giveyou the necessary privilege.00U(1Y\g'VOLINV, volume is not software enabledces1ORGBEGOFFILE, beginning of fileces=A backspace operation backed up to the beginning of the file.8If you are reading backwards or backspacing a tape, this8message indicates that the end-of-the-data area has been9reached. Modify the program to recognize and correct this condition.33:7J1hkL6ACCQUOTA, ACCOUNT had inadequate quota at remote nodeces8An attempt to initiate a network logical link connection7failed. The target object is already using its quota of%logical links or some other resource.7This condition is usually temporary. Try initiating theconnection later.44 %1VY$DEVMOUNT, device is already mountedces7The device specified has a volume mounted and cannot be9allocated, or a volume is already mounted on a device for+which a mount request is previously issued.:Verify the device name (or logical name, if a logical name=is specified) and reenter the command with the correct device=name. If the device name is correct and if the volume that is>mounted can be dismounted, dismount the volume and reenter therequest.55 |?1NQ EOTIN, EOT response to textces1The IBM system sent an EOT instead of an expected:acknowledgment to XKDRIVER after receiving a block of datafrom XKDRIVER.7Either a normal condition exists where the IBM host has7acknowledged the receipt of a block of text with an EOT;instead of an ACK (in this case, you do not need to provide;corrective action), or an error has occurred. When an error=occurs, you may need to correct and retransmit the last blockof data to the IBM host.66  #I1TW"DEVNOTALLOC, device not allocatedces=The device specified in a deallocate request is not currently allocated.:Verify the device name (or logical name, if a logical name=is specified) and reenter the command with the correct devicename.77w%W1VY$NOSUCHSEC, no such (global) sectionces>The global section name specified in a request to map a globalsection does not exist.7Verify that the program that creates the global section:successfully created the section, and that the section has;not been deleted. Also, check that the logical name strings)specifying the global section name match.885~1fi4NODELPERMANENT, permanent persona cannot be deletedces9The $PERSONA_DELETE system service detected an attempt to8delete a permanent persona. Currently the only permanent6persona is the process's login persona (persona ID 1).6Modify the user code that performs the $PERSONA_DELETE=system service so it does not attempt to delete the permanentpersona.99pI14ACCVIO, access violation, reason mask='xx', virtual: address='location', PC='location', PSL='xxxxxxxx'ces=An image attempted to read from or write to a memory location5that is protected from the current mode. This message>indicates an exception condition and is followed by a register;and stack dump to help locate the error. The reason mask is9a longword whose lowest 5 bits, if set, indicate that the=instruction caused a length violation (bit 0), referenced the=process page table (bit 1), attempted a read/modify operation8(bit 2), was a vector operation on an improperly aligned=vector element (bit 3), or was a vector instruction reference to an I/O space address (bit 4).space permits. For example, the automatic user stack expansion8algorithm reports an access violation with the following:two conditions (which should serve as hints that automaticexpansion has failed):=o The reason mask has the low-order bit set. This indicates a; memory reference that is not described in any page table.:o The relatively small P1 address space virtual address is referenced.reported virtual address may be some other address in the same=page as that address to which the access was attempted. Check:the program listing to verify that instruction operands or%procedure call arguments are correct.The transaction identifier (TID) specified in the user programwas not found.-Check the user program and correct the error.;;O5]1fia4NOEXTAUTH, external authentication is not availableces;External authentication is not available for authentication>H=1nqLZoutside the security domain of the receiving node. The request:cannot be serviced without potentially compromising system security.:Make sure that all OpenVMS Cluster nodes refer to the same1rights database file (SYS$SYSTEM:RIGHTSLIST.DAT).BBj31dg|2NOALLSPOOL, operation requires ALLSPOOL privilegeces>A command or program requested a system function that requires:ALLSPOOL privilege; the current process does not have this privilege.2If the message is in response to a command entered;interactively, verify that a command or a qualifier was not;used for a particular command that requires a specific user privilege.8If the message occurs during the execution of a program,=determine the system service call that resulted in the error.7Verify that a service or an argument was not used for a:particular service that requires a user privilege that you do not have.=In either case, correct the command or program so that you do>not request the privileged function. If you determine that you>need the privilege for an application, ask your system manager$to give you the necessary privilege.CCn=1nqModify the source program, if necessary, to detect and respondto the condition. to0determine the instruction that caused the error.at runtime/and make the call only if the value is nonzero.sion block map, and fails only if it is unable*to allocate sufficient memory for the map.None.ort.&}me&Shared by several fa.01_g-BADFORM, 'form-type' is an invalid form typecilitiescontents of the output file, and delete the output file beforereentering the command. & %1Ng1bj0BADJOBID, 'job-id' is an invalid job identifiercilities7The job identifier specified by the /ENTRY qualifier ismissing or not valid.4Respecify a valid job identifier with one of the job1identifiers listed in the DCL command SHOW QUEUE. &&/GW1`h.BADJOBNAME, 'job-name' is an invalid job namecilities;The job name specified by the /NAME qualifier is missing or not valid.>Respecify the job name with one of the job names listed in theDCL command SHOW QUEUE. &'),G1Zb(NOTCOPIED, 'input-file-spec' not copiedcilities+A requested input file could not be copied.=Take action based on the accompanying OpenVMS RMS file systemmessage.&5+%81V^G$WRITEERR, error writing 'file-spec'cilities8During an OpenVMS RMS file system operation, an error is!encountered while writing a file.9If this error occurred during a macro assembly operation,:the assembler encountered an I/O error when writing to the=output object module or listing file; 'file-spec' is the file(specification of the file being written.7Determine that the file is open and that you have write>access. If this is a macro assembly error, retry the assembly.9If the error is reproducible, notify your system manager.&, Rq18COPIEDB, 'input-file-spec' copied to 'output-file-spec' ('nnn' blocks)cilities;This message displays the number of blocks or the number of4blocks copied, based on the size of the input files.None.&- Ss18COPIEDR, 'input-file-spec' copied to 'output-file-spec' ('nnn' records)cilitiesThis message is associated with the execution of a DCL command9RENAME. The name of the first file is changed to the name'given in the second file specification.None.&8)"1Zb)(BADKEY, 'keyword' is an invalid keywordcilities!An invalid keyword was specified.=Check the command for a spelling or syntax error. Use the DCL>command HELP or refer to the HP OpenVMS DCL Dictionary for the'valid keywords and reenter the command.&8<I 1mu;PRODNOTINS, optional software product 'name' not installedcilities;The specified optional software product is not installed on your system.Install the requested software.&:-:1^f,REPLACED, 'output-file-spec' being replacedcilities9An output file is replaced successfully by a new version.None.&> 4/1QYSYSERROR, system service errorcilities3An error occurred while executing a system service..Take action based on the accompanying message.&? $e1U]#EXISTS, 'file-spec' already existscilities=The directory specified in the DCL command CREATE/DIR already&exists. This message is informational.None.&?E1v~DPROTECTED, protection on 'file-spec' changed to 'protection-string'cilities>This message is associated with the execution of a DCL command>SET PROTECTION. The protection of the named file is changed tothe value specified.None.&@:*/1ks9SYSERRORPC, 'name' system service error at PC 'location'cilities)An error is detected by a system service..Take action based on the accompanying message.&E$%G1U]#OPENERR, error opening 'file-spec'cilities$The specified file cannot be opened.=Take action based on the accompanying OpenVMS RMS file systemmessage.&F)%I1Zb(BADLOGIC, internal logic error detectedcilities$An internal software error occurred.6Collect as much information as possible and contact HPCustomer Support.&J<1mu%;BADLOGICPC, internal logic error detected at PC 'location'cilities7An internal error occurred; the location field contains:the value of the PC at the time the error is detected. Thethe SOS or SLP editors and creating a new version of the file.$$&e "]L1S[!HALTED, transfer has been haltedcilities=If this message is returned from a DR32 support routine call,the DR32 transfer is complete.=If the DR32 transfer halted unexpectedly, determine the cause of the error.%%&fB1s{ACBT, insufficient contiguous space, file copied non-contiguouslycilities1There is insufficient disk space to copy the file9contiguously; the file is copied, but the output file maynot be contiguous.None.&&&l'B1X`&NOTLOCKED, 'file-spec' was not lockedcilities7The file specified by the DCL command UNLOCK is already unlocked.None.''&+qX17=message displays the number of blocks or the number of records.appended, based on the size of the input file.None.((&:wz1FNLQEMPTY, queue emptycilities=If this message is returned from a DR32 support routine call,;the termination queue is empty but the transfer is still in progress.3Continue trying to remove a command packet from the:termination queue until you are successful or the transfer completes.))&x,TU1]e+NOQUEUE, 'queue-name' queue does not existcilities=A request to enter or change a queued file failed because thequeue does not exist.=Verify the queue name in the command and reenter the command.8To determine the names and status of currently available5queues, use the DCL command SHOW QUEUE/DEVICES/BATCH.:Note that the DCL commands SET QUEUE and SHOW QUEUE do not9translate logical names. If you specified a logical name,1reenter the command with the physical queue name.**&~=1nv Use a full file specification (with no abbreviated file IDs or>directory IDs). If the full file name is too long, you can use;a wildcard in your file specification. Specify the /CONFIRM=qualifier (if supported by the command you are using) to have;the utility prompt you with individual names that match the:selection criteria. You can then confirm the filenames youwish to act on.++&&W)18?FILDIDFID, unable to process file specification containing DID and/or FIDcilities9The utility that displays this message requires that file9specifications not contain a directory ID (DID) or a fileUse a full file specification (with no abbreviated file IDs or>directory IDs). If the full file name is too long, you can use;a wildcard in your file specification. Specify the /CONFIRM=qualifier (if supported by the command you are using) to have;the utility prompt you with individual names that match the:selection criteria. You can then confirm the filenames youwish to act on.,,&=1nvwhere a file ID lookup would return the primary file name when the alias file name is required.>Use a full file specification (with no abbreviated file IDs or>directory IDs). If the full file name is too long, you can use;a wildcard in your file specification. Specify the /CONFIRM=qualifier (if supported by the command you are using) to have;the utility prompt you with individual names that match the:selection criteria. You can then confirm the filenames youwish to act on.--& >o1ow=HIGHVER, higher version of 'output-file-spec' already existscilities;An explicit version number is requested for an output file;>the directory already contains an entry for the same file namelocate the previously existing version if no version number is:specified. The newly created output file will not be used.None...&=l1NVRMSERROR, RMS service errorcilitiesUse a full file specification (with no abbreviated file IDs or>directory IDs). If the full file name is too long, you can use;a wildcard in your file specification. Specify the /CONFIRM=qualifier (if supported by the command you are using) to have;the utility prompt you with individual names that match the:selection criteria. You can then confirm the filenames youwish to act on.22&B*/1s{AUNXPCTSTS, unexpected status detected. Expected 'status'. Found:cilities)An error is detected by a system service..Take action based on the accompanying message.33&71MUNOFILPURG, no files purgedcilities6No files were purged. The directory is already purged.None.44&L/1IQATPC, at PC 'xxxxxxxx'cilities9This message generally accompanies a message indicating asoftware failure..Take action based on the accompanying message.55&%JG1V^$CLOSEDEL, error closing 'file-name'cilities>An error occurred while a file was being closed after a delete operation.=Take action based on the accompanying OpenVMS RMS file systemmessage.66&%%;1V^$CLOSEERR, error closing 'file-spec'cilities$The specified file cannot be closed.:Take action based on the accompanying OpenVMS RMS message.77&u&"1W_%NORMAL, normal successful completioncilities!The operation completed normally.None.88&3c/1dl2CLOSEIN, error closing 'input-file-spec' as inputcilities9During an OpenVMS RMS file system operation, an error was(encountered while closing an input file..Take action based on the accompanying message.99&(*1Ya'OVERLAY, 'file-spec' being overwrittencilities)A file is being successfully overwritten.None.::&6]?1go 5CLOSEOUT, error closing 'output-file-spec' as outputcilities>During an OpenVMS RMS file system operation, an error occurredwhile closing an output file.>Take action based on the accompanying RMS file system message.;;& 0:;1ai/IDXCONCAT, indexed file cannot be concatenatedcilities9An indexed file cannot be concatenated with another file.:Use an indexed file load program to load the indexed file.<<&x -1OWDELETED, 'file-name' deletedcilities,The specified file was successfully deleted.None.==&/5&1`h.VALERR, specified value is out of legal rangecilities4A value is specified that is not within legal range.%Respecify a value within legal range.>>&7*Z1hp6BADTIME, 'time-spec' is an invalid time specificationcilities)An invalid time specification is entered.>Respecify the time specification using the rules listed in theHP OpenVMS DCL Dictionary.??& &I.1W_%ENDABORT, 'name' compilation abortedcilities=Serious errors prevented the compilation of 'name' from being completed.-Correct the errors and recompile the program.@@&< 3a1dlN2ENDDIAGS, 'name' completed with 'nnn' diagnosticscilities7The compilation or assembly of 'name' is completed with7diagnostics. Use of the object module produced may giveinvalid results.;Correct the conditions that resulted in the diagnostics and$recompile or reassemble the program.AA&] 1FNioENDED, 'name' endedcilitiesA program phase has ended.None.BB&x 01ai/ENDEDD, 'name' ended at 'system date and time'cilitiesA program phase has ended.None.CC&,51]e+BADBYTE, invalid data ('xx') at 'location'cilities4The specified data is invalid at the given location.None.DD&o '1X`{&ENDEDT, 'name' ended at 'system time'cilitiesA program phase has ended.None.EE&4k1em)3NOJOBID, job 'nnn' not found in 'queue-name' queuecilities:A request to modify or delete a job failed because the job:does not exist. The message identifies the job by job name6or job identification number, depending on the commandspecification.8Verify that the job identification number or job name is9entered correctly. If it is not, reenter the command with=the correct job identification number or job name. If the job:identification number or job name is correct, this message:indicates that the job is no longer in the queue; that is,8the job has already been processed or is currently being processed.FF& D\@1u}CENDNOOBJ, 'name' completed with 'nnn' diagnostics - object deletedcilities7The compilation or assembly of 'name' is completed with#errors. No object file is produced.3Correct the source language errors and recompile or reassemble.GG&;k1lt0:NOJOBNAME, job 'job-name' not found in 'queue-name' queuecilities:A request to modify or delete a job failed because the job:does not exist. The message identifies the job by job name6or job identification number, depending on the commandspecification.8Verify that the job identification number or job name is9entered correctly. If it is not, reenter the command with=the correct job identification number or job name. If the job:identification number or job name is correct, this message:indicates that the job is no longer in the queue; that is,8the job has already been processed or is currently being processed.HH&&D1W_%PARSEFAIL, error parsing 'file-spec'cilities=An error is detected while parsing an input command or sourceline.Correct the error.II&//n1`h.BADVALUE, 'value' is an invalid keyword valuecilities.An invalid value is specified for the keyword.8Check the command string for a spelling or syntax error.4Verify the values or syntax and reenter the command.JJ&$)G1U]#READERR, error reading 'file-spec'cilities(The specified input file cannot be read.=Take action based on the accompanying OpenVMS RMS file systemmessage.KK&n(1JRzABEND, 'string' abortedcilities'A program phase terminated prematurely.None.LL&v$%1U]#ABENDD, 'string' aborted at 'date'cilities$A program phase aborted prematurely.None.MM&) 7I1hp;6DELVER, explicit version number or wild card requiredcilities=The DCL command DELETE requires a version number in each file specified.1nv9determine whether the identifier exists or use SHOW [username]to see if the user exists.9You must create an identifier (using either the AUTHORIZE7command ADD/IDENTIFIER or another program that uses the:appropriate system security services) before you can grant9or revoke an identifier's usage or before you can add the:identifier to or remove it from a process or system rightslist.WW&-,1PXNOWILD, no wildcard permittedcilities,Wildcards are not permitted in this context.+Respecify, using exact file specifications.XX& 'E/1X`&FILNOTPUR, error deleting 'file-spec'cilities>An error is detected during an attempt to delete the specifiedfile..Take action based on the accompanying message.YY& o1QYFILPURGED, 'file-spec' deletedcilities:The DCL command PURGE displays the file specification of a3file it is deleting. This message is informational.None.ZZ&1rG1bj#0BADDELIM, invalid delimiter following 'command'cilities;An invalid character was entered as part of a command. This5message displays the rejected portion of the command.=Check the command for a spelling or syntax error; reenter thecommand.[[&-'/1^f,SEARCHFAIL, error searching for 'file-spec'cilities&The specified file could not be found..Take action based on the accompanying message.\\&j"1LTv|BEGIN, 'string' beginningcilities!A program phase is being started.None.]]&j&1W_v|%BEGIND, 'string' beginning at 'date'cilitiesA program phase began.None.^^&j&1W_v|%BEGINT, 'string' beginning at 'time'cilitiesA program phase began.None.__&)SQ1Zb(CONFDEL, 'file-name', delete? (Y or N):cilities>This message requests interactive confirmation before deletingthe indicated file.;Enter Y if you want the file deleted, and enter N if you donot want it deleted.``&nm|^1"ENOMEANING, qualifiers 'qualifier-names' are no longer meaningful for& the 'command-name' commandcilities>The command contains one or more DCL qualifiers that have beenREFLECT, Internal TIE exception code reported to user. Please3 contact a Digital support representative.e Environmentimage was translated. When the program finished executing, the=TIE created the specified .HIF file and then recorded the VAX1entry points it detected while interpreting code.3To improve the performance of the translated image,image was translated. When the program finished executing, the=TIE recorded those VAX entry points in the existing .HIF fileidentified in the message.3To improve the performance of the translated image,discovered a single VAX entry point that was not detected when>the image was translated. When the program finished executing,=the TIE created the specified .HIF file and then recorded the4VAX entry point it detected while interpreting code.3To improve the performance of the translated image,HIFENTRYWRITTEN, 'file-name' created. There was one HIF entry written to it.e Environment:While interpreting VAX code in a translated image, the TIE>discovered a single VAX entry point that was not detected when>the image was translated. When the program finished executing,>the TIE recorded the VAX entry point in the existing .HIF fileidentified in the message.3To improve the performance of the translated image,A translated RET instruction has an unsupported system addressas its return address.:Fix the original OpenVMS VAX code to use only those system*services supported by OpenVMS VAX systems. e\!+1ENOINSHIFENT, Unable to insert HIF entry - Address: 'file-name' Code: 'code'.e Environment*The TIE has encountered an internal error.Contact HP Customer Support. e<!+1mz;KNOWN, Duplicate image detected in list of images: 'image'e Environment*The TIE has encountered an internal error.Contact HP Customer Support.e 5!+1fs4FILEOPEN, Message redirection file is already open.e Environment*The TIE has encountered an internal error.Contact HP Customer Support.eU!1n;VECTORINSTR, Emulation of vector instruction 'instruction' requested.e Environment8The translated program attempted to execute a VAX vector:instruction by means of the TIE emulation facility. If the:system were to respond correctly, it would issue an OPCDEC+exception when the offending code executes.7Rewrite the code in the original image to eliminate the7unsupported vector instruction, and contact HP CustomerSupport about the VEST error.e&!+1Wd%INVREMQHI, Invalid remqhi operation.e Environment*The TIE has encountered an internal error.Contact HP Customer Support.eV!FQ1+9TRANSINSTR, Emulation of normally translated instruction 'instruction'.e Environment9The TIE has emulated an instruction that VEST should have translated.>Retain the image that incurred this VEST error, and contact HPCustomer Support.eA@!1q~6S?TRANSLATEBUG, Please contact a Digital support representative.e Environment9This message is a TIE return value signifying that it hasthe SOS or SLP editors and creating a new version of the file.$$&e "]L1S[!HALTED, transfer has been haltedcilities=If this message is returned from a DR32 support routine call,the DR32 transfer is complete.=If the DR32 transfer halted unexpectedly, determine the cause of the error.%%&fB1s{ACBT, insufficient contiguous space, file copied non-contiguouslycilities1There is insufficient disk space to copy the file9contiguously; the file is copied, but the output file maynot be contiguous.None.&&&l'B1X`&NOTLOCKED, 'file-spec' was not lockedcilities7The file specified by the DCL command UNLOCK is already unlocked.None.''&+qX17=message displays the number of blocks or the number of records.appended, based on the size of the input file.None.((&:wz1FNLQEMPTY, queue emptycilities=If this message is returned from a DR32 support routine call,;the termination queue is empty but the transfer is still in progress.3Continue trying to remove a command packet from the:termination queue until you are successful or the transfer completes.))&x,TU1]e+NOQUEUE, 'queue-name' queue does not existcilities=A request to enter or change a queued file failed because thequeue does not exist.=Verify the queue name in the command and reenter the command.8To determine the names and status of currently available5queues, use the DCL command SHOW QUEUE/DEVICES/BATCH.:Note that the DCL commands SET QUEUE and SHOW QUEUE do not9translate logical names. If you specified a logical name,1reenter the command with the physical queue name.**&~=1nv Use a full file specification (with no abbreviated file IDs or>directory IDs). If the full file name is too long, you can use;a wildcard in your file specification. Specify the /CONFIRM=qualifier (if supported by the command you are using) to have;the utility prompt you with individual names that match the:selection criteria. You can then confirm the filenames youwish to act on.++&&W)18?FILDIDFID, unable to process file specification containing DID and/or FIDcilities9The utility that displays this message requires that file9specifications not contain a directory ID (DID) or a fileUse a full file specification (with no abbreviated file IDs or>directory IDs). If the full file name is too long, you can use;a wildcard in your file specification. Specify the /CONFIRM=qualifier (if supported by the command you are using) to have;the utility prompt you with individual names that match the:selection criteria. You can then confirm the filenames youwish to act on.,,&=1nvwhere a file ID lookup would return the primary file name when the alias file name is required.>Use a full file specification (with no abbreviated file IDs or>directory IDs). If the full file name is too long, you can use;a wildcard in your file specification. Specify the /CONFIRM=qualifier (if supported by the command you are using) to have;the utility prompt you with individual names that match the:selection criteria. You can then confirm the filenames youwish to act on.--& >o1ow=HIGHVER, higher version of 'output-file-spec' already existscilities;An explicit version number is requested for an output file;>the directory already contains an entry for the same file namelocate the previously existing version if no version number is:specified. The newly created output file will not be used.None...&=l1NVRMSERROR, RMS service errorcilitiesUse a full file specification (with no abbreviated file IDs or>directory IDs). If the full file name is too long, you can use;a wildcard in your file specification. Specify the /CONFIRM=qualifier (if supported by the command you are using) to have;the utility prompt you with individual names that match the:selection criteria. You can then confirm the filenames youwish to act on.22&B*/1s{AUNXPCTSTS, unexpected status detected. Expected 'status'. Found:cilities)An error is detected by a system service..Take action based on the accompanying message.33&71MUNOFILPURG, no files purgedcilities6No files were purged. The directory is already purged.None.44&L/1IQATPC, at PC 'xxxxxxxx'cilities9This message generally accompanies a message indicating asoftware failure..Take action based on the accompanying message.55&%JG1V^$CLOSEDEL, error closing 'file-name'cilities>An error occurred while a file was being closed after a delete operation.=Take action based on the accompanying OpenVMS RMS file systemmessage.66&%%;1V^$CLOSEERR, error closing 'file-spec'cilities$The specified file cannot be closed.:Take action based on the accompanying OpenVMS RMS message.77&u&"1W_%NORMAL, normal successful completioncilities!The operation completed normally.None.88&3c/1dl2CLOSEIN, error closing 'input-file-spec' as inputcilities9During an OpenVMS RMS file system operation, an error was(encountered while closing an input file..Take action based on the accompanying message.99&(*1Ya'OVERLAY, 'file-spec' being overwrittencilities)A file is being successfully overwritten.None.::&6]?1go 5CLOSEOUT, error closing 'output-file-spec' as outputcilities>During an OpenVMS RMS file system operation, an error occurredwhile closing an output file.>Take action based on the accompanying RMS file system message.;;& 0:;1ai/IDXCONCAT, indexed file cannot be concatenatedcilities9An indexed file cannot be concatenated with another file.:Use an indexed file load program to load the indexed file.<<&x -1OWDELETED, 'file-name' deletedcilities,The specified file was successfully deleted.None.==&/5&1`h.VALERR, specified value is out of legal rangecilities4A value is specified that is not within legal range.%Respecify a value within legal range.>>&7*Z1hp6BADTIME, 'time-spec' is an invalid time specificationcilities)An invalid time specification is entered.>Respecify the time specification using the rules listed in theHP OpenVMS DCL Dictionary.??& &I.1W_%ENDABORT, 'name' compilation abortedcilities=Serious errors prevented the compilation of 'name' from being completed.-Correct the errors and recompile the program.@@&< 3a1dlN2ENDDIAGS, 'name' completed with 'nnn' diagnosticscilities7The compilation or assembly of 'name' is completed with7diagnostics. Use of the object module produced may giveinvalid results.;Correct the conditions that resulted in the diagnostics and$recompile or reassemble the program.AA&] 1FNioENDED, 'name' endedcilitiesA program phase has ended.None.BB&x 01ai/ENDEDD, 'name' ended at 'system date and time'cilitiesA program phase has ended.None.CC&,51]e+BADBYTE, invalid data ('xx') at 'location'cilities4The specified data is invalid at the given location.None.DD&o '1X`{&ENDEDT, 'name' ended at 'system time'cilitiesA program phase has ended.None.EE&4k1em)3NOJOBID, job 'nnn' not found in 'queue-name' queuecilities:A request to modify or delete a job failed because the job:does not exist. The message identifies the job by job name6or job identification number, depending on the commandspecification.8Verify that the job identification number or job name is9entered correctly. If it is not, reenter the command with=the correct job identification number or job name. If the job:identification number or job name is correct, this message:indicates that the job is no longer in the queue; that is,8the job has already been processed or is currently being processed.FF& D\@1u}CENDNOOBJ, 'name' completed with 'nnn' diagnostics - object deletedcilities7The compilation or assembly of 'name' is completed with#errors. No object file is produced.3Correct the source language errors and recompile or reassemble.GG&;k1lt0:NOJOBNAME, job 'job-name' not found in 'queue-name' queuecilities:A request to modify or delete a job failed because the job:does not exist. The message identifies the job by job name6or job identification number, depending on the commandspecification.8Verify that the job identification number or job name is9entered correctly. If it is not, reenter the command with=the correct job identification number or job name. If the job:identification number or job name is correct, this message:indicates that the job is no longer in the queue; that is,8the job has already been processed or is currently being processed.HH&&D1W_%PARSEFAIL, error parsing 'file-spec'cilities=An error is detected while parsing an input command or sourceline.Correct the error.II&//n1`h.BADVALUE, 'value' is an invalid keyword valuecilities.An invalid value is specified for the keyword.8Check the command string for a spelling or syntax error.4Verify the values or syntax and reenter the command.JJ&$)G1U]#READERR, error reading 'file-spec'cilities(The specified input file cannot be read.=Take action based on the accompanying OpenVMS RMS file systemmessage.KK&n(1JRzABEND, 'string' abortedcilities'A program phase terminated prematurely.None.LL&v$%1U]#ABENDD, 'string' aborted at 'date'cilities$A program phase aborted prematurely.None.MM&) 7I1hp;6DELVER, explicit version number or wild card requiredcilities=The DCL command DELETE requires a version number in each file specified.1nv9determine whether the identifier exists or use SHOW [username]to see if the user exists.9You must create an identifier (using either the AUTHORIZE7command ADD/IDENTIFIER or another program that uses the:appropriate system security services) before you can grant9or revoke an identifier's usage or before you can add the:identifier to or remove it from a process or system rightslist.WW&-,1PXNOWILD, no wildcard permittedcilities,Wildcards are not permitted in this context.+Respecify, using exact file specifications.XX& 'E/1X`&FILNOTPUR, error deleting 'file-spec'cilities>An error is detected during an attempt to delete the specifiedfile..Take action based on the accompanying message.YY& o1QYFILPURGED, 'file-spec' deletedcilities:The DCL command PURGE displays the file specification of a3file it is deleting. This message is informational.None.ZZ&1rG1bj#0BADDELIM, invalid delimiter following 'command'cilities;An invalid character was entered as part of a command. This5message displays the rejected portion of the command.=Check the command for a spelling or syntax error; reenter thecommand.[[&-'/1^f,SEARCHFAIL, error searching for 'file-spec'cilities&The specified file could not be found..Take action based on the accompanying message.\\&j"1LTv|BEGIN, 'string' beginningcilities!A program phase is being started.None.]]&j&1W_v|%BEGIND, 'string' beginning at 'date'cilitiesA program phase began.None.^^&j&1W_v|%BEGINT, 'string' beginning at 'time'cilitiesA program phase began.None.__&)SQ1Zb(CONFDEL, 'file-name', delete? (Y or N):cilities>This message requests interactive confirmation before deletingthe indicated file.;Enter Y if you want the file deleted, and enter N if you donot want it deleted.``&nm|^1"ENOMEANING, qualifiers 'qualifier-names' are no longer meaningful for& the 'command-name' commandcilities>The command contains one or more DCL qualifiers that have beenREFLECT, Internal TIE exception code reported to user. Please3 contact a Digital support representative.e Environmentimage was translated. When the program finished executing, the=TIE created the specified .HIF file and then recorded the VAX1entry points it detected while interpreting code.3To improve the performance of the translated image,image was translated. When the program finished executing, the=TIE recorded those VAX entry points in the existing .HIF fileidentified in the message.3To improve the performance of the translated image,^)\P1PDBADFIRSTLINE, first line = 'integer', must be between 'integer' and 'integer'sing Utility (DECTPU)9A first-line argument that is outside the physical screen!limits is given to CREATE_WINDOW.=Reenter your command with a valid first line value (between 1and page length).$;)1l06:OCCLUDED, built-in/keyword 'name' occluded by declarationsing Utility (DECTPU):A parameter, local variable, or constant was declared that9has the same name as a built-in procedure or keyword. The9declaration supersedes the built-in procedure or keyword.None.7)U]1h}/6UIDICONERR, could not read icon 'name' from UID filesing Utility (DECTPU)=DECTPU cannot read the specified icon from the user interfacedefinition (UID) file.=Make sure the icon name is correct and check whether the iconexists in the UIL source file. 6)WD1g|5UIDOPENERR, could not open the specified UID file(s)sing Utility (DECTPU)>DECTPU cannot open one or more of the specified user interfacedefinition (UID) files.)!1o&=WIDMISMATCH, parameter 'numbers' class, 'class', unsupportedsing Utility (DECTPU)8The wrong type of widget was passed to a DECTPU built-in:procedure. Usually, the procedure can accept only a simple text widget. Correct your code and try again. :)WS1k*9UIDWIDGETERR, could not read widget 'name' from UID filesing Utility (DECTPU)5DECTPU cannot read the specified widget from the user interface definition (UID) file.=Make sure the widget name is correct and the widget exists inthe UIL source file.  ')511Xm&NOBREAKPOINT, no breakpoint is activesing Utility (DECTPU)4The attempted call is valid only after a breakpoint.0Enter the call only in response to a breakpoint.  ')N1Xm&REFRESH_NEEDED, screen refresh neededsing Utility (DECTPU)The built-in procedure you are attempting to use (for example,;POSITION) can use only visible windows. The window that was)h1o=DICDEL, 'word' has been removed from 'word' of a dictionarysing Utility (DECTPU)>A word has been deleted from your personal dictionary. This is(a Japanese input method related message.None.D>)[w1oV=NOCACHE, insufficient virtual memory to allocate a new cachesing Utility (DECTPU)>The system does not have enough memory available to allocate anew cache for your process.9First, delete unneeded strings, ranges, markers, windows,;and buffers, then reenter your command. If the error recurs;on a VAX system, increase the value of the SYSGEN parameter>VIRTUALPAGECNT. If the available memory is still insufficient,8try to increase your account's page file quota. Finally,:if the error persists, ask your system manager to increaseavailable memory.gW)G12yCREGWIDDUP, registration string already associated with a different widgetsing Utility (DECTPU)>The registration string is already associated with a different9widget. An application is attempting to register multiplewidgets with the same name.>Modify the application to use unique names for each registeredwidget. +)RB1\q*DICUPDERR, error updating dictionary filesing Utility (DECTPU)9Dictionary updating is disabled. This is a Japanese inputmethod related message.6Exit from the session and restart using an appropriate qualifier. )(%1QfINVTIME, invalid time intervalsing Utility (DECTPU)'An invalid time interval was specified.$Correct the specified time interval.,),(1]r+NOTARRAY, indexed variable is not an arraysing Utility (DECTPU)+The variable being indexed is not an array.'Use indexing with array variables only. ')611Xm&ILLREQUEST, request 'name' is invalidsing Utility (DECTPU)5The specified request is not valid for this built-in.0Reenter the command with a valid request string.)/51LaSYNTAXERROR, syntax errorsing Utility (DECTPU).The program being compiled has a syntax error.4Correct the syntax error and recompile your program.>)K1o=NOCALLUSER, could not find a routine for CALL_USER to invokesing Utility (DECTPU)5You must specify a routine for the CALL_USER built-inprocedure to invoke.Specify a routine. m)y1,2BADJSCROLLREG, scrolling parameters altered to top: 'top', bottom:) 'bottom', amount: 'amount'sing Utility (DECTPU)7The window you adjusted is not big enough to handle the7current scrolling region; the scrolling region has beenaltered.None.6)2<1g|5BADHIERARCHY, invalid hierarchy identifier specifiedsing Utility (DECTPU)1An invalid UID hierarchy identifier is specified.;Specify an identifier returned from the SET (UID) built-in.C)A11tBUNARYOPER, operand combination 'operator' 'data-type' unsupportedsing Utility (DECTPU):The specified operator does not support the specified datatype.0Use only supported data types with the operator.W)l1z=BOTLINETRUNC, calculated new last line 'integer', changed to 'integer'sing Utility (DECTPU)7The new last line of an adjusted window would have been8greater than the actual number of physical screen lines.8Therefore, DECTPU has calculated the number of available2screen lines and truncated the window accordingly.9None is required. However, you can reexecute the built-in1procedure ADJUST_WINDOW with different arguments. 3)L91dy2ERRSYMACTIVE, special error symbol already activesing Utility (DECTPU)9The special error symbol can be set only once, and it hasalready been set.8Be sure to be the first to set the special error symbol. +)h31\q *CONSTRTOOLARGE, constant string too largesing Utility (DECTPU):A constant declaration includes a constant expression that,exceeds the internal tables of the compiler.2Use an expression that generates a shorter string. =)m1n)%1o=ONDELRECLIST, attempt to access a record on the deleted listsing Utility (DECTPU)$An internal DECTPU failure occurred.Contact HP Customer Support.--  ')i\1Xm2&PRESSRET, Press RETURN to continue...sing Utility (DECTPU);DECTPU is waiting for you to press the Return key to scroll,additional help information onto the screen.=Press the Return key to see more information, or press Ctrl/Zto leave help prompting mode...#0)_1av/INVBUFDELETE, cannot delete a permanent buffersing Utility (DECTPU)5An attempt was made to delete a buffer that is set to(PERMANENT by the SET built-in procedure.None.// %4)1r1ez3INVWIDGETCLASS, the widget class cannot be definedsing Utility (DECTPU)0DECTPU cannot define the specified widget class.7Check the widget class name, creation_routine_name, and9creation routine image name to see that they are correct.00&=)2@1n)\1o=FROMPROCLINE, called from line 'integer' of procedure 'name'sing Utility (DECTPU)7This message shows the line number of the caller in the#procedure where the error occurred.None.99%)8)Pi1i~77ONESELECT, select already active, maximum 1 per buffersing Utility (DECTPU);The built-in procedure SELECT was used a second time withinthe current buffer.>Set the previous select mark to 0 or delete the current select)range with the DELETE built-in procedure.::h*j)yQ1)zDBADJOUEDIT, journaled edit mode was 'mode-setting', recovering with$ 'original-mode-setting'sing Utility (DECTPU)>p-n){S1/ABADJOUINIT, journaled init file was 'init-file-name', recovering+ with 'original-init-file-name'sing Utility (DECTPU)7The editing session is being recovered with a different9initialization file than was used in the original editingsession.=Stop the recovery session, then restart it using the originalinitialization file.??-%)#31Vk$WRITEERR, error writing 'file-spec'sing Utility (DECTPU)"The output file cannot be written.2Take action based on the accompanying RMS message.@@c.s)rJ1+uDBADJOUINPUT, journaled input file was 'input-file-name', recovering- with 'original-input-file-name'sing Utility (DECTPU)=The editing session is being recovered with a different input3file than was used in the original editing session.=Stop the recovery session, then restart it using the original input file.AA.!)$-1Rg MISSYMTAB, missing symbol tablesing Utility (DECTPU)#A required symbol table is missing.,Use the required symbol table or create one.BBC.))a1ZoU(NOTDEFINABLE, that key is not definablesing Utility (DECTPU)=The key that you tried to define using the built-in procedure"DEFINE_KEY is not a definable key.7Use a definable key (see the description of the DEFINE_9KEY built-in procedure in the DEC Text Processing UtilityReference Manual).CC!/)):1Zo3(BADJOUKEY, expected key in journal filesing Utility (DECTPU)9Something other than a key was found in the journal file.:If the recovered information is sufficient, resume editingprocess, entering a LOGOUT command while in the subprocess, or5having the subprocess stopped by another system user.None.KKJ3V)tL1\@BADJOUSEC, journaled section file was 'string', recovering with 'string'sing Utility (DECTPU)7The editing session is being recovered with a different;section file than was used in the original editing session.=Stop the recovery session, then restart it using the original section file.LL3.)0<1_t-BUILTININV, built-in is invalid at this timesing Utility (DECTPU)/The attempted built-in is invalid at this time.;Use the built-in only when its preconditions allow its use.MM(4,)=1]r:+BADJOUSTR, expected string in journal filesing Utility (DECTPU)The editing session is being recovered with a different screen4width than was used in the original editing session.=Stop the recovery session, then restart it using the original screen width.RR6 )#l1LaDIVBYZERO, divide by zerosing Utility (DECTPU)"Division by zero is not permitted.9None required. However, check the program for attempts to1divide by zero and correct any occurrences found.SS7;)l1l:PROCSUPERSEDED, definition of procedure 'name' supersededsing Utility (DECTPU)=The procedure being defined already had a definition. The new-definition you supplied replaces the old one.None.TT8<)'O1m;ONOROFF, parameter 'number' must be ON, OFF, true or falsesing Utility (DECTPU)&A parameter was incorrectly specified.01r@NOTERRORKEYWORD, error handler selector is not an error keywordsing Utility (DECTPU)=The specified error handler selector is not an error keyword./Specify only error keywords as error selectors.YY>6)1g|Z5NOCURRENTBUF, no buffer has been selected as defaultsing Utility (DECTPU)7You attempted to use a built-in procedure to modify the:current buffer when you were not working in a buffer. This=error occurs when no buffers have been created, because there,is no buffer to serve as the default buffer.8Establish a current buffer. To do this, either move to a>buffer, or associate a buffer with a window and map the windowto the screen.ZZ>E)1vkDREPLAYFAIL, an inconsistency has been discovered, halting executionsing Utility (DECTPU)>A learn sequence stopped executing. The sequence of keystrokes7)A1h}6UNKCSCOMP, ignoring unknown compound string componentsing Utility (DECTPU)8DECTPU cannot process an unknown component in a compoundstring.None.\\Y?[)71k@REPLAYWARNING, an inconsistency has been discovered, continuing executionsing Utility (DECTPU):During the execution of a learn sequence, an inconsistency:is discovered between the original actions and the current;ones. It is possible to continue execution, but the resultsdefinitions are now different from when the learn sequence wascreated.8None is required. However, if you suspect that the learn9sequence did not complete correctly, check the text wherethe learn sequence is replayed.]]? )4/1QfSYSERROR, system service errorsing Utility (DECTPU)3An error occurred while executing a system service..Take action based on the accompanying message.^^@=)6=1nThis usually occurs because the EXIT procedure could not write=the modified buffers. This message should be accompanied by aThis message specifies the name of the built-in that generated the error.None.jjI>)`1o=REQUIRESDECW, feature requires the DECwindows screen updatersing Utility (DECTPU)=The requested operator or feature is available only using the!DECTPU DECwindows screen updater.Do not use the feature.kkJ&)n1Wl%CANCELQUIT, QUIT canceled by requestsing Utility (DECTPU);Execution of the built-in procedure QUIT is canceled when a1"no" response is made to the REALLYQUIT question.None.llJA)ZL1r-@REQUIRESMOTIF, feature requires the DECTPU Motif screen updatersing Utility (DECTPU)MODRANGEMARKS, MODIFY_RANGE requires either two marks or nonesing Utility (DECTPU):You must specify that both new ends of the range are to be(modified, or that there are no new ends.;Correct the call to MODIFY_RANGE, using the BEGINNING_OF orEND_OF built-in procedure.ooK+)EB1\q*REQUIRESTERM, feature requires a terminalsing Utility (DECTPU)9The requested feature can be used only when a terminal is available.6Either do not use the feature, or specify the /DISPLAY qualifier.ppL 5)\51f{ 4EXPECTED, one of the following symbols is expected:sing Utility (DECTPU)>You program contains a syntax error. One of the symbols listedwas expected, but not found.4Correct the syntax error and recompile your program.evious translation.5You can disable all the .HIF entry messages either at:translation or at run time. When translating an image, use:the /NOFEEDBACK qualifier in the VEST command line. At runVIRTUALPAGECNT. If the available memory is still insufficient,8try to increase your account's page file quota. Finally,:if the error persists, ask your system manager to increaseavailable memory.L@)JC1q?REQUIRESULTRIX, feature not available on this operating systemsing Utility (DECTPU)7The requested feature is available only with the ULTRIXoperating system.:Do not attempt to use this feature on an OpenVMS operatingsystem.XM@)U1qj?CANNOTUNSEL, cannot unselect item from unselect action routinesing Utility (DECTPU);An attempt was made to unselect the global selection within=the action routine, which is called when the global selectionis being unselected.;The global item is already unselected; remove the code thatattempts to unselect it.M=)Kc1n1The dictionary for the Japanese input method does not have thespecified word.None.d1)RB1bw 0NODICUPD, the dictionary is restricted updatingsing Utility (DECTPU)9Dictionary updating is disabled. This is a Japanese inputmethod related message.6Exit from the session and restart using an appropriate qualifier.Ke1)M1bw]0MOUSEINV, mouse location information is invalidsing Utility (DECTPU)>The mouse information is valid only after a mouse key has been:received. An attempt is being made to use a mouse functionbefore a mouse key is pressed.The built-in procedure LEARN_END executed without the built-in#procedure LEARN_BEGIN preceding it.4A learn sequence must be started before you can save keystrokes.f@)EI1q?INVFAOPARAM, FAO parameter 'integer' must be string or integersing Utility (DECTPU)9The FAO built-in procedure allows only string and integer arguments.=Specify only string and integer arguments to the FAO built-in procedure.f&)61Wl%MAXVALUE, maximum value is 'integer'sing Utility (DECTPU)5The argument value exceeds the maximum value allowed.Specify a valid argument.i 3)151dy2EXTNOTFOUND, extension 'extension-name' not foundsing Utility (DECTPU)0The named extension to DECTPU cannot be located.4Install the named extension before trying to use it.eiV)hs1wCMOVETOCOPY, move from unmodifiable buffer 'buffer-name' changed to copysing Utility (DECTPU)>You cannot change the source buffer, so your MOVE_TEXT request(has been changed to a COPY_TEXT request.When an ambiguous symbol is used as a parameter in a call, the/compiler is forced to generate nonoptimal code.;Define the named symbol as either a procedure or a variable$before using it as a call parameter.##m <)\#1m;EXTRANEOUSARGS, one or more extraneous arguments specifiedsing Utility (DECTPU)8One or more extraneous arguments were specified for this"DECwindows Motif for OpenVMS call."Specify only acceptable arguments.$$o()h41Yn 'REVERSECASE, CASE limits were reversedsing Utility (DECTPU)>A CASE statement has the upper and lower label value reversed.(The lower value must be specified first.3Reverse the CASE values and recompile your program.%%p?)(>1p>NOTMODIFIABLE, attempt to change unmodifiable buffer 'string'sing Utility (DECTPU)'The specified buffer cannot be changed.=Use the SET (MODIFIABLE,...) built-in to allow modifications.&&r *)|C1[p/)DUPBUFNAME, buffer 'name' already existssing Utility (DECTPU);The first argument for the built-in procedure CREATE_BUFFER7must be a unique string. The name you specified alreadyexists.8Reenter the command with a different string as the first argument.''s<)F1m;NOENDOFLINE, returning a range of text with no end of linesing Utility (DECTPU):DECTPU is returning a range of text without an end-of-line indicator.None.((tC)JG1tBMSGBUFSET, attempt to change modifiable setting of message buffersing Utility (DECTPU);The message buffer cannot be set to be either modifiable or unmodifiable.>Do not attempt to change the modifiable setting of the messagebuffer.))u6)7N1g|5INVGBLSELDATA, the selected data cannot be processedsing Utility (DECTPU)6DECTPU cannot process the data of the selected region.6Select 8-bit uniform font text when pasting the globalselection into DECTPU.**v E))1vDFACTOOLONG, facility name, 'name', exceeds maximum length 'integer'sing Utility (DECTPU)(The specified facility name is too long.Shorten the facility name.++xU)Z1?MSGNOTFND, message was not found; the default message has been returnedsing Utility (DECTPU)return the null string if you are positioned at the end of theReduce the size of any oversized windows or increase the widthof the terminal.YY()<I1Yn'NOGBLSELDATA, no global selection datasing Utility (DECTPU);There is no data in the DECwindows global selection region.;Select data before attempting to paste the global selection into DECTPU.ZZ)1OdBADSECTION, bad section filesing Utility (DECTPU)The section file is invalid.Use a valid section file.[[ 7)<"1h}6FENCEPOST, no visible record found in specified rangesing Utility (DECTPU);DECTPU cannot find a visible record in the specified range.!Select a new range and try again.\\3)$`1dy2NOGBLSELOWNER, there is no global selection ownersing Utility (DECTPU)#There is no global selection owner.>Make sure that an application owns the global selection before requesting information about it.]]$ @)Oa1q6?IDMISMATCH, section NOT restored, section file must be rebuiltsing Utility (DECTPU)>This version of DECTPU is not compatible with the section filebeing accessed.>Save the section file again by running the source file through!the version of DECTPU being used.^^ ()Z1Yn'INPUT_CANCELED, input request canceledsing Utility (DECTPU)=Terminal input indicates that the input request was canceled.This is an internal status.None.__68)=1i~ H7OVERLAPRANGE, overlapping ranges, operation terminatedsing Utility (DECTPU)=The source and destination ranges of a COPY_TEXT or MOVE_TEXT>overlap. The operation was terminated before any modificationswere performed.procedure JOURNAL_CLOSE if you want to close the journal file.aa3)c/1dy 2CLOSEIN, error closing 'input-file-spec' as inputsing Utility (DECTPU)9During an OpenVMS RMS file system operation, an error was(encountered while closing an input file..Take action based on the accompanying message.bbD)1u CJOURNALCLOSE, Journal file successfully closed, journaling stoppedsing Utility (DECTPU)=The built-in procedure JOURNAL_CLOSE closed the journal file.:The subsequent commands will not be written to the journalfile.None.cc7:)1k0I9STATOOLONG, truncating status line to 'count' characterssing Utility (DECTPU)8You defined a window status line that is too long to fit:within the boundaries of the current physical width of the;terminal. The text has been truncated to fit on the screen.Shorten the status line.dd14)>1ezC3JOURNALEOF, End of journal file found unexpectedlysing Utility (DECTPU)=Journal recovery is aborted due to an unexpected end of file.:If the recovered information is sufficient, resume editing)91oV=JRNLNOTSAFE, buffer 'buffer-name' is not safe for journalingsing Utility (DECTPU)>For journaling to be started, the buffer must be either empty,:never modified, or not modified since the last time it waswritten to a recoverable file.8Write the buffer to a file before turning on journaling.hh>)071o=JRNLOPEN, journal file already open for buffer 'buffer-name'sing Utility (DECTPU)/A journal file for this buffer is already open.6Close the current journal file before opening another.ii&W)l/1 8BJRNLOPENERR, error opening or locking journal file 'journal-file- spec'sing Utility (DECTPU)8The journal file cannot be created, exists but cannot be2opened, is already locked, or cannot be truncated..Take action based on the accompanying message.jj9)CB1j8NOTSUBCLASS, object is not a subclass of WindowObjClasssing Utility (DECTPU):A request has been made for the name of a widget that is agadget.0Use a widget returned from the built-in GET_INFO(WIDGET,"NAME").kkq4)/1ezT3BACKUPERR, error making backup copy of 'file-spec'sing Utility (DECTPU)9One of the following conditions may be causing the error:6o The file specification contains wildcard characters.3o No NAM block exists with an expanded string area.0o The file cannot be renamed to the backup file..Take action based on the accompanying message.ll):1Mb.NOSELECT, no select activesing Utility (DECTPU);An attempt was made to select a range of text with only the:built-in procedure SELECT_RANGE (and not with the built-inprocedure SELECT as well).9Begin a selection by using the built-in procedure SELECT.mmF)#1wEBADSTATUS, return status 'xxxxxxxx' different from signal 'xxxxxxxx'sing Utility (DECTPU)"There is an internal DECTPU error.Contact HP Customer Support.nn#)611Ti"INVNUMSTR, invalid numeric stringsing Utility (DECTPU)5The specified string cannot be converted to a number.0Use a string that correctly represents a number.oo"7)-1h}46BADSTRCNT, invalid string count found in journal filesing Utility (DECTPU),The journal file contains an invalid string.:If the recovered information is sufficient, resume editingThis built-in procedure must be used on the right-hand side of4an assignment statement or as part of an expression.uu)1NcBADSYMTAB, bad symbol tablesing Utility (DECTPU)The symbol table is invalid.Correct the symbol table.vvec)N1w?KEYMAPNOTFND, key map 'key-map-name' not found in key-map list" 'key-map-list-name'sing Utility (DECTPU);An attempt is being made to remove a key map that is not inthe key-map list.8Enter the built-in procedure SHOW (KEY_MAP_LISTS) on the8command line to obtain the names of the key maps in your key-map list.ww,C)dQ1t>BNOSHOWBUF, variable SHOW_BUFFER does not exist or is not a buffersing Utility (DECTPU)>The built-in procedure SHOW depends on SHOW_BUFFER existing as$a variable that references a buffer.7Create the variable SHOW_BUFFER and have it reference abuffer, them retry SHOW.xx=E)A1vODREADABORTED, READ_CHAR, READ_KEY, or READ_LINE built-in was abortedsing Utility (DECTPU)8The READ_CHAR, READ_KEY, or READ_LINE built-in proceduredescriptor, or references memory not accessible by your accessmode.;For information on how to use descriptors, refer to OpenVMS1Programming Interfaces: Calling a System Routine. "B)J=1sAKEYWORDPARAM, keyword 'name' used as procedure/variable/constantsing Utility (DECTPU)An I/O error occurred while writing the contents of the buffer;to a file. There may be operating system or RMS file system>errors. An accompanying message may specify the reason for the;error. The creation of the file stopped at the point of theerror.7Correct the specified problem and reenter your command. ":)K;1k9TOOMANYPARAM, too many formal parameters/local variablessing Utility (DECTPU)=The maximum number of 31 formal parameters or local variables is exceeded.:Reduce the number of formal parameters or local variables. "2)I1cx1CNVERR, error occurred in the conversion routinesing Utility (DECTPU)>An error occurred in the Japanese input method service library (JSYSHR).None.")a1PeTOOMANYRECS, too many recordssing Utility (DECTPU)=The architectural limit has been reached for the total number"of records that DECTPU can create.Erase or delete some buffers.")6*1NcNOTYET, not yet implementedsing Utility (DECTPU)5The built-in being used has not yet been implemented.)Use a built-in that has been implemented."7)k1h}6STRTOOLNG, string is too long for a conversion sourcesing Utility (DECTPU)>The conversion string length exceeded the maximum length. This+is a Japanese input method related message.Shorten conversion string."A1)O1bwS0BADCASELIMIT, CASE constant outside CASE limitssing Utility (DECTPU)If you want to open a journal file, use the built-in procedure JOURNAL_OPEN."&)J?1Wl%PARSEFAIL, error parsing 'file-spec'sing Utility (DECTPU):The RMS file system detected an error while parsing a filespecification.>Take action based on the accompanying RMS file system message."")h!BADCASERANGE, invalid CASE rangesing Utility (DECTPU)The case range is invalid.:Specify a case range or specify at least one case selectorother than INRANGE or OUTRANGE."B):B1sABADVALUE, integer value 'integer' is outside of specified limitssing Utility (DECTPU)9The argument supplied is outside of the valid boundaries.7Reenter your command with a valid integer value for the argument."")31Sh!PARSEOVER, parser stack overflowsing Utility (DECTPU)2The program is too complex for DECTPU to evaluate.Simplify the expression." 4)E1ez3ENDOFFILE, end of file on read to terminal or filesing Utility (DECTPU)>Premature end-of-file encountered on read from input device orfile.Contact HP Customer Support."A)5h1r$@NOKEYMAP, attempt to access an undefined key map 'key-map-name'sing Utility (DECTPU)4A key map that has not been created was referred to.;Enter the built-in procedure SHOW (KEY_MAPS) on the command+line to obtain the names of valid key maps."H_)Fo1ZDNOKEYMAPLIST, attempt to access an undefined key-map list 'key-map- list-name'sing Utility (DECTPU)Take action based on the accompanying RMS file system message."*)11[p")BADCHAR, unrecognized character in inputsing Utility (DECTPU)8The program you are trying to compile contains a control;character or some other character that is not recognized by the parser.0Remove the unrecognized character and recompile." ,)-51]r+ILLCONDIT, illegal compilation conditionalsing Utility (DECTPU),The program contains an illegal conditional.4Modify the program so that the conditional is valid.";)5<1l:BADWIDTHCHANGE, terminal will not support change of widthsing Utility (DECTPU)4The window width cannot be changed on your terminal.;Use a different terminal or do not change the window width. " ()E1Yn'INSVIRMEM, insufficient virtual memorysing Utility (DECTPU)the window. Make the window two or more lines long if there isa status line.##"-)VC1^s ,NOLICENSE, DECTPU license validation failedsing Utility (DECTPU)9The DECTPU license is not installed, or the limits of thelicense have been exceeded.;Install a DECTPU license, or upgrade to a license with moreunits.$$"U():1Yng'SAVEERROR, error during SAVE operationsing Utility (DECTPU)9An error occurred while DECTPU was saving a section file.:Check the directory specification, the file protection, orA window was adjusted. The new first line, however, would have2been less than 1, so DECTPU has truncated it to 1.9None is required. However, you can reexecute the built-inSpecify a range of text that consists of either complete linesor a fragment of a single line.**"1)]1bw0SCANADVANCE, *** scanner advanced to 'name' ***sing Utility (DECTPU)8The scanner advanced so that the compiler could continue#compiling after the error occurred.None.++" ):Q1QfILLEGALTYPE, illegal data typesing Utility (DECTPU)9The expression or operator contains an invalid data type.8Check the data type and make sure it is supported by theexpression or operator.,," ).1QfSUCCESS, successful completionsing Utility (DECTPU)-A DECTPU function was successfully completed.None.--"0)1av#/COMPILED, compilation completed without errorssing Utility (DECTPU)8The execution of the built-in procedure COMPILE has been8successfully completed; that is, a procedure, string, or4buffer has been compiled without warnings or errors.None..." ")~51Sh!COMPILEFAIL, compilation abortedsing Utility (DECTPU)7A syntax error exists in the program you are attempting9to compile. The compilation of the program is prematurely terminated.4Correct the syntax error and recompile your program.//"w^)F1=REALLYQUIT, buffer modifications will not be saved, continue quitting (Y or N)?sing Utility (DECTPU):This message prompts you for confirmation that you want to:execute the built-in procedure QUIT rather than the built-Enter NO if you change your mind and wish to continue editing.>Enter YES if you want to complete the built-in procedure QUIT. You must respond with YES or NO.00">)G01o=BADDELETE, cannot modify constant integer, keyword or stringsing Utility (DECTPU)inconsistency if you continue. The condition is indicated by a/warning message displayed prior to this prompt.=Do not continue the recovery if your environment is different'from that of the journaled environment.44" <)FV1m;LINETOOLONG, line is maximum length, cannot add text to itsing Utility (DECTPU)Use the SHOW built-in procedure to find the maximum length andthen shorten the line.55"=)\;1nText Processing Utility Reference Manual for the proper values to specify.=="]c)1Qo>RECOVERABORT, recovery aborted by journal file inconsistency;# journal file closed.sing Utility (DECTPU)7An inconsistency is found between what the journal file8contained and what the executing procedure expected. The6recovery has aborted, and the journal file has closed.>DECTPU has recovered as much as it can from your journal file.:If the recovered information is sufficient, resume editing7from this point. Otherwise, correct any inconsistencies9between the initial terminal state and the terminal state1when you recover your file with the journal file.>>"2^)WI1DESECTUNDEFPROC, saved 'count' undefined procedures, 'count' ambiguous symbolssing Utility (DECTPU)5The saved section file contains one or more undefined procedures or ambiguous symbols.The recovery of a previously journaled buffer has successfullybegun.None.AA";)J+1l:RECOVERBUFEND, recovery complete for buffer 'buffer-name'sing Utility (DECTPU)>The recovery of a previously journaled buffer has successfully completed.*Resume editing as before the interruption.BB"p)%14ACCVIO, access violation, reason mask='xx', virtual: address='xxxxxxxx', PC='xxxxxxxx', PSL='xxxxxxxx'sing Utility (DECTPU)$An internal DECTPU failure occurred.Contact HP Customer Support.CC"8);D1i~7RECOVERBUFFILE1, can not recover from file 'file-name'sing Utility (DECTPU):DECTPU cannot open the file specified in the journal file.:Enter a file name in response to the prompt following thismessage.DD"B)M11sABINARYOPER, operand combination 'type' 'oper' 'type' unsupportedsing Utility (DECTPU):The specified operator does not support the specified datatype combination.0Use only supported data types with the operator.EE"B);81sARECOVERBUFFILE2, type new specification for original input file:sing Utility (DECTPU):DECTPU cannot open the file specified in the journal file.7Enter a file name, or press the Return key to continue.FF")<1OdNULLSTRING, null string usedsing Utility (DECTPU);A null string was used where a non-null string is required.Use a non-null string.GG"<)m81m';RECOVERBUFFILE3, type new specification for inserted file:sing Utility (DECTPU)>DECTPU cannot open the file specified in the journal file that-was inserted into the buffer being recovered.7Enter a file name, or press the Return key to continue.HH"9);D1j8RECOVERBUFFILE4, can not find inserted file 'file-name'sing Utility (DECTPU):DECTPU cannot open the file specified in the journal file.:Enter a file name in response to the prompt following thismessage.II"))v1Zo(SELRANGEZERO, select range has 0 lengthsing Utility (DECTPU)>The range selected for the built-in procedure SELECT_RANGE has6a length of 0; therefore, no characters were selected.None.JJ")Q+1PeRECOVEREND, recovery completesing Utility (DECTPU)8The recovery of a DECTPU session from a journal file hascompleted successfully.*Resume editing as before the interruption.KK"))N1Zo(SYMDELETE, *** error symbol deleted ***sing Utility (DECTPU)9The error symbol was deleted in order for the compiler tocontinue compiling.None.LL" *)#1[p)INVACCESS, invalid file access specifiedsing Utility (DECTPU)"An internal DECTPU error occurred.Contact HP Customer Support.MM"3W)1dE:RECOVERFAIL, recovery terminated abnormally; journal file inconsistencysing Utility (DECTPU);The recovery is probably not being performed on exactly the:same text file as the original DECTPU session, or the keys>may have different definitions than those used in the originalediting session.=Try the recovery again on the same type of terminal, with the>same terminal setup, using the original input file and commandAn expression was used without an assignment (:=) to assign itto a variable.0Add the appropriate assignment to the statement.UU":)U,1k9RECURLEARN, learn sequence reply halted due to recursionsing Utility (DECTPU):The key learn sequence is bound within the learn sequence,causing an infinite loop.+Bind the learn sequence to a different key.VV"5)O1f{4SYMREPLACE, *** error symbol replaced by 'name' ***sing Utility (DECTPU):The error symbol was replaced in order for the compiler tocontinue compiling.None. visible record in the specified range.!Select a new range and try again.\\3)$`1dy2NOGBLSELOWNER, there is no global selection ownersing Utility (DECTPU)#There is no global selection owner.>Make sure that an application owns the global selection before requesting information about it.]]$ @)Oa1q6?IDMISMATCH, section NOT restored, section file must be rebuiltsing Utility (DECTPU)>This version of DECTPU is not compatible with the section filebeing accessed.>Save the section file again by running the source file through!the version of DECTPU being used.^^ ()Z1Yn'INPUT_CANCELED, input request canceledsing Utility (DECTPU)=Terminal input indicates that the input request was canceled.This is an internal status.None.__68)=1i~ H7OVERLAPRANGE, overlapping ranges, operation terminatedsing Utility (DECTPU)=The source and destination ranges of a COPY_TEXT or MOVE_TEXT>overlap. The operation was terminated before any modificationswere performed.procedure JOURNAL_CLOSE if you want to close the journal file.aa3)c/1dy 2CLOSEIN, error closing 'input-file-spec' as inputsing Utility (DECTPU)9During an OpenVMS RMS file system operation, an error was(encountered while closing an input file..Take action based on the accompanying message.bbD)1u CJOURNALCLOSE, Journal file successfully closed, journaling stoppedsing Utility (DECTPU)=The built-in procedure JOURNAL_CLOSE closed the journal file.:The subsequent commands will not be written to the journalfile.None.cc7:)1k0I9STATOOLONG, truncating status line to 'count' characterssing Utility (DECTPU)8You defined a window status line that is too long to fit:within the boundaries of the current physical width of the;terminal. The text has been truncated to fit on the screen.Shorten the status line.dd14)>1ezC3JOURNALEOF, End of journal file found unexpectedlysing Utility (DECTPU)=Journal recovery is aborted due to an unexpected end of file.:If the recovered information is sufficient, resume editing)91oV=JRNLNOTSAFE, buffer 'buffer-name' is not safe for journalingsing Utility (DECTPU)>For journaling to be started, the buffer must be either empty,:never modified, or not modified since the last time it waswritten to a recoverable file.8Write the buffer to a file before turning on journaling.hh>)071o=JRNLOPEN, journal file already open for buffer 'buffer-name'sing Utility (DECTPU)/A journal file for this buffer is already open.6Close the current journal file before opening another.ii&W)l/1 8BJRNLOPENERR, error opening or locking journal file 'journal-file- spec'sing Utility (DECTPU)8The journal file cannot be created, exists but cannot be2opened, is already locked, or cannot be truncated..Take action based on the accompanying message.jj9)CB1j8NOTSUBCLASS, object is not a subclass of WindowObjClasssing Utility (DECTPU):A request has been made for the name of a widget that is agadget.0Use a widget returned from the built-in GET_INFO(WIDGET,"NAME").kkq4)/1ezT3BACKUPERR, error making backup copy of 'file-spec'sing Utility (DECTPU)9One of the following conditions may be causing the error:6o The file specification contains wildcard characters.3o No NAM block exists with an expanded string area.0o The file cannot be renamed to the backup file..Take action based on the accompanying message.ll):1Mb.NOSELECT, no select activesing Utility (DECTPU);An attempt was made to select a range of text with only the:built-in procedure SELECT_RANGE (and not with the built-inprocedure SELECT as well).9Begin a selection by using the built-in procedure SELECT.mmF)#1wEBADSTATUS, return status 'xxxxxxxx' different from signal 'xxxxxxxx'sing Utility (DECTPU)"There is an internal DECTPU error.Contact HP Customer Support.nn#)611Ti"INVNUMSTR, invalid numeric stringsing Utility (DECTPU)5The specified string cannot be converted to a number.0Use a string that correctly represents a number.oo"7)-1h}46BADSTRCNT, invalid string count found in journal filesing Utility (DECTPU),The journal file contains an invalid string.:If the recovered information is sufficient, resume editingThis built-in procedure must be used on the right-hand side of4an assignment statement or as part of an expression.uu)1NcBADSYMTAB, bad symbol tablesing Utility (DECTPU)The symbol table is invalid.Correct the symbol table.vvec)N1w?KEYMAPNOTFND, key map 'key-map-name' not found in key-map list" 'key-map-list-name'sing Utility (DECTPU);An attempt is being made to remove a key map that is not inthe key-map list.8Enter the built-in procedure SHOW (KEY_MAP_LISTS) on the8command line to obtain the names of the key maps in your key-map list.ww,C)dQ1t>BNOSHOWBUF, variable SHOW_BUFFER does not exist or is not a buffersing Utility (DECTPU)>The built-in procedure SHOW depends on SHOW_BUFFER existing as$a variable that references a buffer.7Create the variable SHOW_BUFFER and have it reference abuffer, them retry SHOW.xx=E)A1vODREADABORTED, READ_CHAR, READ_KEY, or READ_LINE built-in was abortedsing Utility (DECTPU)8The READ_CHAR, READ_KEY, or READ_LINE built-in procedureThe image header in the executable image file does not contain>expected symbol table data. This message indicates an internaloperating system error.6Collect as much information as possible and contact HPCustomer Support.a 1QVNOCALLS, no active call framesility6There are no call frames on the stack for traceback to6display. This message usually occurs when a user image=issues an RET instruction that returns control to the command interpreter.None.ay?R1pu9>SOURCELINE, leading '#' specifies a source file record numberility6A '#' preceding the line number indicates that it is a;record number in the source file-as opposed to the standard9convention of indicating a listing line number within thecompiler listing file.Collect as much information as possible, including the virtual7block number (VBN) displayed in the message. Contact HPCustomer Support.aD0I1af V/BADEXE, failure to open image file 'file-name'ility9The operating system rejected the format of the indicated>executable image file. The file cannot be opened. This message-indicates an internal operating system error.6Collect as much information as possible and contact HPCustomer Support.aH4I1ejZ3BADEXECLO, failure to close image file 'file-name'ility9The operating system rejected the format of the indicated>executable image file. The file cannot be closed. This message-indicates an internal operating system error.6Collect as much information as possible and contact HPCustomer Support.a/6I1glA5BADEXERAB, failure to connect image file 'file-name'ility9The operating system rejected the format of the indicated9executable image file. This message indicates an internaloperating system error.6Collect as much information as possible and contact HPCustomer Support.aUAF, Authorize Utili"/1SUp!MDFYERR, unable to update recordtyThe record is not updated..Take action based on the accompanying message.ao!'1RT{ MDFYMSG, user record(s) updatedty&The records were successfully updated.None.a$S&1UW#UICERR, error in UIC specificationty;A user identification code (UIC) was specified incorrectly.9User identification codes have the format [group,member],7where the values for group and member can be numeric or8alphanumeric. The system translates each code into a 32-6bit octal string; the high-order 16 bits are the groupzeros when specifying a numeric identifier. In an alphanumericthe network authorization file (NETPROXY.DAT) for the original9user name are automatically renamed to the new user name.None.a-%&1VX~?$INVUSERNAME, user name syntax errorty%An incorrect user name was specified.5Enter a user name specifying a string of 1 through 129alphanumeric characters, underscores, wildcard characters>(dollar signs are permissible, but usually reserved for systemnames), or a UIC.a*91[]*)INVUSERSPEC, error in user specificationty:The command included an incorrect user specification. In a9user specification, you can use a numeric UIC format (for9example, [007,007]), an alphanumeric format (for example,8[COMPOSERS,HAYDN]), or a user name (for example, HAYDN).9Wildcards can be used to specify multiple users. Refer to;the HP OpenVMS System Management Utilities Reference Manual5for specific syntax rules for the command being used.8Correct the user specification and reenter your command.a5v1fh4PREMMSG, record removed from network proxy databasety>The record specified in the AUTHORIZE command REMOVE/PROXY has6been removed from the network user authorization file.None.a/K1`b.REMDEF, the DEFAULT record may not be removedty>An attempt was made to remove the DEFAULT record, which cannot be removed.None. a#!,/1RT REMERR, unable to delete recordty+This message is issued with other messages..Take action based on the accompanying message.!!a}$71hj6REMMSG, record removed from system authorization filetyThis message is informational.None.""a+WP/1 ;ONFADDERR, error adding entry to old format proxy database (NETPROXY.DAT)ty8An error occurred while adding a proxy record to the oldformat proxy database..Take action based on the accompanying message.##aU,_R1gCONFBUFOVF, old format proxy database record exceeds maximum length (NETPROXY.DAT)ty8A record in the old format proxy database has an invalid=record length. This error can occur if the old proxy database is damaged.ONFMODERR, error modifying entry in old format proxy database (NETPROXY.DAT)tyThe /OLD qualifier was specified with /PROXY on a SHOW or LIST:command to display information contained in the old format3proxy database, but such a database does not exist.3Omit the /OLD qualifier from the command to display$information from the proxy database.//a4',/1XZ&LSTERR, error generating listing filety+This message is issued with other messages..Take action based on the accompanying message.00a4DF/1uwCONFOPNERR, unable to open old format proxy database (NETPROXY.DAT)ty;An error occurred while trying to open the old format proxy database..Take action based on the accompanying message.11a4*3G1[])SHOWERR, unable to complete show commandty2The AUTHORIZE command SHOW could not be completed.=Take action based on the accompanying OpenVMS RMS file systemmessage.22ae51PRqwLSTMSG1, writing listing filetyThis message is informational.None.33a5[i/1&?ONFREMERR, error removing entry from old format proxy database (NETPROXY.DAT)ty=OpenVMS RMS encountered an error while attempting to delete a*record from the old format proxy database..Take action based on the accompanying message.44a5/K1`b.RENDEF, the DEFAULT record may not be renamedty>An attempt was made to rename the DEFAULT record, which cannot be renamed.None.55aq6+1\^}*LSTMSG2, listing file SYSUAF.LIS completetyThis message is informational.None.66ac61NPouRENMSG, user record renamedtyThis message is informational.None.77a7.J1_a-RENSYS, the SYSTEM record may not be renamedty=An attempt was made to rename the SYSTEM record, which cannot be renamed.None.88a:|!1JLINVCMD, invalid commandty9The command is invalid, either because the command parser6cannot recognize the command, or because the syntax is incorrect. Correct and reenter the command.99a@ "Y1SU!Do you want to create a new file?ty=The Authorize utility is prompting you to confirm whether youwant to create a new file.Respond YES (Y) or NO (N).::asC -1^`,DONEMSG, system authorization file modifiedtyThis message is informational.None.;;aH J/1DFGETERR, get errorty3A get error occurred for the reason described in anaccompanying message..Take action based on the accompanying message.<<aHBc1suANODEFPWD, DEFAULT password change has no effect on ADDed recordsty6The DEFAULT password for added records is always USER,+regardless of the DEFAULT record specified.None.==aI=v1npThe identifier name that you specified does not translate to ain the range of 32,768 to 268,435,455. General identifiers are0created by the AUTHORIZE command ADD/IDENTIFIER.>When the AUTHORIZE command GRANT/IDENTIFIER is used, the first:identifier specified must be in general identifier format.>aO2:1ce1INVDEV, device name too long to add trailing ':'ty9A device name was specified with more than 15 characters.Shorten the device name.??aO#)^1TV"PRVNOTFND, invalid privilege namety(An invalid privilege name was specified.:Specify a valid privilege name. See the Security Guide for"information about privilege names.@@aQ&L@1WY%PRVNOTUNQ, privilege name not uniquety;Not enough characters of a privilege name were specified tomake it unique.9Enter at least the first four characters of the privilegename.AAa\ A,/1rt@CREERR, unable to create system authorization file (SYSUAF.DAT)ty+This message is issued with other messages..Take action based on the accompanying message.BBa^ =eQ1np&wildcard character for either the node or user, you must stillinclude the pair of colons..Reenter your command using the correct format.EEaa  J1QS_SYSMSG2, ERROR CODE 'hex-code'ty9The $GETMSG system service could not find a corresponding=message for the specified error code, which may indicate that>the code is incorrect. Since an incorrect error code obviously;should not be generated, this message probably indicates aninternal software error.7Note the conditions leading to the error and contact HPCustomer Support.FFac,/1DFrPUTERR, put errorty+This message is issued with other messages..Take action based on the accompanying message.GGad%D1VX$SYSPWDMOD, system password modifiedty8The system password has been changed to the password you specified.None.HHahBy(1suAPWDLESSMIN, new password is shorter than minimum password lengthty5The specified password contains fewer characters than9the minimum number previously established for this user'saccount.'None. This is an informational message.IIak,1PRNODTOOBIG, node name too longty8Node names cannot exceed six characters. A node name may;consist of one to six alphanumeric characters; at least onecharacter must be alphabetic.+Reenter your command with the correct name.JJakW1OQPWDNCH, password not changedty8An error occurred using the random password generator togenerate an account password.None.KKal)<'1Z\(PWDNOL, password not on list; try againty;The password that was specified is not one of those listed.&Select another password and try again.LLan +j31\^*EXTRAPARM, superfluous parameter detectedty;Too many parameters were specified in the command line. The-extra parameter is identified in the message.2Reenter your command without the excess parameter.MMavpAG1rt@REVOKEERR, unable to revoke identifier 'id-name' from 'user-id'ty6The specified identifier could not be revoked from thespecified user.7Make sure that the user has been granted the identifier3you are trying to revoke. Use the AUTHORIZE command:SHOW/IDENTIFIER/FULL or LIST/IDENTIFIER/FULL to display an%identifier and the users who hold it.NNaq:1km9REVOKEMSG, identifier 'id-name' revoked from 'user-name'tyThe contents of the rights database file (RIGHTSLIST.DAT) have6been written to the listing file named RIGHTSLIST.LIS.None.SSa1Xx@1CAGENMINPWD, minimum password length is set too high for generated passwordsty;The value specified by the /PWDMINIMUM qualifier is greater;than 10, the maximum value allowed for generated passwords.4Specify a value of 10 or smaller for the /PWDMINIMUM qualifier.TTaU-1ACLIWARNMSG, /CLITABLES field may need to reflect changes to /CLI fieldty=If you modify the command language interpreter (CLI) field ofoccurs if you try to add a record authorizing a remote user to>access more than one local account. Each user at a remote nodeto delete a current record from NETPROXY.DAT in order to add a3new record, use the AUTHORIZE command REMOVE/PROXY.XXaTp1ANAFADDMSG, proxy from 'node-name'::'remote-user' to 'local-user' addedty>A network proxy from the remote node and user to the specified0local user has been added to the proxy database.None.YYa4V/1eg3NAFCONERR, connect error on network proxy databasetyvalue between 65,536 and 268,435,455. A UIC identifier takes avalue in standard UIC format.CREATE/PROXY to create a network user authorization file. Then>you can add records to the file by using the AUTHORIZE command ADD/PROXY.^^a0_W1ac/NOGRPWILD, wild card group numbers not allowedty;Wildcard characters are not allowed in the UIC group number"field for the command you entered.=Reenter your command with a specific UIC group number insteadof a wildcard character.__a-u1^`,NAFDONEMSG, network proxy database modifiedty;The network user authorization file (NETPROXY.DAT) has been8modified to reflect the change directed by your command.None.``a ),/1Z\(DEFERR, unable to obtain DEFAULT recordty+This message is issued with other messages..Take action based on the accompanying message.aaa.a1_a-NAFMAXEX, exceeded maximum local proxy countty>You attempted to add more than the system-specified maximum of!16 local users to a proxy record.=Rethink the strategy being used that requires this many local9users for a single remote user. Try using multiple remoteThe identifier name specified could not be added to the rights;database file (RIGHTSLIST.DAT). Most likely, the identifier:name already exists in the rights database file. Duplicate=identifier names are not allowed in the rights database file.rights database file (RIGHTSLIST.DAT); if the UIC has not been>changed, it will conflict with the UIC of the original record,+and a 'duplicate identifier' error results.user authorization file and you want an identifier for the newrights database file. Duplicate identifier names or values are(not allowed in the rights database file.?1oq9x=RDBCREERR, unable to create rights database (RIGHTSLIST.DAT)ty6The rights database file (RIGHTSLIST.DAT) could not be6created. For example, you cannot create another rightsNAOFIL, unable to open system authorization file (SYSUAF.DAT)ty9The system user authorization file cannot be opened. This9error can occur if the file is not located in the current=default directory, or if you do not have sufficient privilege<]1oq =NAONAF, unable to open network proxy database (NETPROXY.DAT)tyThe record for the specified identifier in the rights database9file has been modified according to the AUTHORIZE commandMODIFY/IDENTIFIER.None.5;1fh4RDBNOMODS, no modifications made to rights databasety:The rights database file (RIGHTSLIST.DAT) is not modified.None.e?m1prw>NOTUICFMT, user ID parameter does not translate to UIC formatty>The user specification in your command does not translate to a-UIC identifier (an identifier in UIC format).Display user names and their corresponding UIC values by usingthe AUTHORIZE command SHOW.<^G1mo;RDBREMERR, unable to remove 'id-name' from rights databasety=The specified identifier could not be removed from the rightsdatabase file (RIGHTSLIST.DAT).=Take action based on the accompanying OpenVMS RMS file systemmessage.U$F1UWg#NOIDNAME, no ID name was specifiedty4The command you entered requires that you include anidentifier name.:Check the HP OpenVMS System Management Utilities Reference>Manual for the syntax rules regarding identifier names for the>command you want to use. Then reenter the command with a valididentifier name. \1?RDBREMMSG, identifier 'id-name' value: 'hex-code' removed from rights databasety>The general identifier with the specified name and hexadecimal4value has been removed from the rights database file(RIGHTSLIST.DAT).None. [1DRDBREMMSGU, identifier 'id-name' value: '[UIC]' removed from rights databasety3The UIC identifier with the specified name and user=identification code has been removed from the rights databasefile (RIGHTSLIST.DAT).None.=z'1np1KMgINVRSP, invalid responsetyYour response is invalid.=Respond to the "Do you..." message that follows this message. *291[])INVACCESS, error in access specificationty1The access specification contains a syntax error.8Correct the syntax and reenter the access specification. 5oF1fh4UAEERR, invalid user name, user name already existsty8An attempt was made to create a user record that already5exists by using the DCL command COPY, ADD, or RENAME.>For the new records, enter a user name that does not currentlyexist. CU(1tvBCONFLICT, /PASSWORD and /GENERATE_PASSWORD are mutually exclusivetyONFMODERR, error modifying entry in old format proxy database (NETPROXY.DAT)tyThe /OLD qualifier was specified with /PROXY on a SHOW or LIST:command to display information contained in the old format3proxy database, but such a database does not exist.3Omit the /OLD qualifier from the command to display$information from the proxy database.//a4',/1XZ&LSTERR, error generating listing filety+This message is issued with other messages..Take action based on the accompanying message.00a4DF/1uwCONFOPNERR, unable to open old format proxy database (NETPROXY.DAT)ty;An error occurred while trying to open the old format proxy database..Take action based on the accompanying message.11a4*3G1[])SHOWERR, unable to complete show commandty2The AUTHORIZE command SHOW could not be completed.=Take action based on the accompanying OpenVMS RMS file systemmessage.22ae51PRqwLSTMSG1, writing listing filetyThis message is informational.None.33a5[i/1&?ONFREMERR, error removing entry from old format proxy database (NETPROXY.DAT)ty=OpenVMS RMS encountered an error while attempting to delete a*record from the old format proxy database..Take action based on the accompanying message.44a5/K1`b.RENDEF, the DEFAULT record may not be renamedty>An attempt was made to rename the DEFAULT record, which cannot be renamed.None.55aq6+1\^}*LSTMSG2, listing file SYSUAF.LIS completetyThis message is informational.None.66ac61NPouRENMSG, user record renamedtyThis message is informational.None.77a7.J1_a-RENSYS, the SYSTEM record may not be renamedty=An attempt was made to rename the SYSTEM record, which cannot be renamed.None.88a:|!1JLINVCMD, invalid commandty9The command is invalid, either because the command parser6cannot recognize the command, or because the syntax is incorrect. Correct and reenter the command.99a@ "Y1SU!Do you want to create a new file?ty=The Authorize utility is prompting you to confirm whether youwant to create a new file.Respond YES (Y) or NO (N).::asC -1^`,DONEMSG, system authorization file modifiedtyThis message is informational.None.;;aH J/1DFGETERR, get errorty3A get error occurred for the reason described in anaccompanying message..Take action based on the accompanying message.<<aHBc1suANODEFPWD, DEFAULT password change has no effect on ADDed recordsty6The DEFAULT password for added records is always USER,+regardless of the DEFAULT record specified.None.==aI=v1npThe identifier name that you specified does not translate to ain the range of 32,768 to 268,435,455. General identifiers are0created by the AUTHORIZE command ADD/IDENTIFIER.>When the AUTHORIZE command GRANT/IDENTIFIER is used, the first:identifier specified must be in general identifier format.>aO2:1ce1INVDEV, device name too long to add trailing ':'ty9A device name was specified with more than 15 characters.Shorten the device name.??aO#)^1TV"PRVNOTFND, invalid privilege namety(An invalid privilege name was specified.:Specify a valid privilege name. See the Security Guide for"information about privilege names.@@aQ&L@1WY%PRVNOTUNQ, privilege name not uniquety;Not enough characters of a privilege name were specified tomake it unique.9Enter at least the first four characters of the privilegename.AAa\ A,/1rt@CREERR, unable to create system authorization file (SYSUAF.DAT)ty+This message is issued with other messages..Take action based on the accompanying message.BBa^ =eQ1np&wildcard character for either the node or user, you must stillinclude the pair of colons..Reenter your command using the correct format.EEaa  J1QS_SYSMSG2, ERROR CODE 'hex-code'ty9The $GETMSG system service could not find a corresponding=message for the specified error code, which may indicate that>the code is incorrect. Since an incorrect error code obviously;should not be generated, this message probably indicates aninternal software error.7Note the conditions leading to the error and contact HPCustomer Support.FFac,/1DFrPUTERR, put errorty+This message is issued with other messages..Take action based on the accompanying message.GGad%D1VX$SYSPWDMOD, system password modifiedty8The system password has been changed to the password you specified.None.HHahBy(1suAPWDLESSMIN, new password is shorter than minimum password lengthty5The specified password contains fewer characters than9the minimum number previously established for this user'saccount.'None. This is an informational message.IIak,1PRNODTOOBIG, node name too longty8Node names cannot exceed six characters. A node name may;consist of one to six alphanumeric characters; at least onecharacter must be alphabetic.+Reenter your command with the correct name.JJakW1OQPWDNCH, password not changedty8An error occurred using the random password generator togenerate an account password.None.KKal)<'1Z\(PWDNOL, password not on list; try againty;The password that was specified is not one of those listed.&Select another password and try again.LLan +j31\^*EXTRAPARM, superfluous parameter detectedty;Too many parameters were specified in the command line. The-extra parameter is identified in the message.2Reenter your command without the excess parameter.MMavpAG1rt@REVOKEERR, unable to revoke identifier 'id-name' from 'user-id'ty6The specified identifier could not be revoked from thespecified user.7Make sure that the user has been granted the identifier3you are trying to revoke. Use the AUTHORIZE command:SHOW/IDENTIFIER/FULL or LIST/IDENTIFIER/FULL to display an%identifier and the users who hold it.NNaq:1km9REVOKEMSG, identifier 'id-name' revoked from 'user-name'tyThe contents of the rights database file (RIGHTSLIST.DAT) have6been written to the listing file named RIGHTSLIST.LIS.None.SSa1Xx@1CAGENMINPWD, minimum password length is set too high for generated passwordsty;The value specified by the /PWDMINIMUM qualifier is greater;than 10, the maximum value allowed for generated passwords.4Specify a value of 10 or smaller for the /PWDMINIMUM qualifier.TTaU-1ACLIWARNMSG, /CLITABLES field may need to reflect changes to /CLI fieldty=If you modify the command language interpreter (CLI) field ofoccurs if you try to add a record authorizing a remote user to>access more than one local account. Each user at a remote nodeto delete a current record from NETPROXY.DAT in order to add a3new record, use the AUTHORIZE command REMOVE/PROXY.XXaTp1ANAFADDMSG, proxy from 'node-name'::'remote-user' to 'local-user' addedty>A network proxy from the remote node and user to the specified0local user has been added to the proxy database.None.YYa4V/1eg3NAFCONERR, connect error on network proxy databasetyvalue between 65,536 and 268,435,455. A UIC identifier takes avalue in standard UIC format.CREATE/PROXY to create a network user authorization file. Then>you can add records to the file by using the AUTHORIZE command ADD/PROXY.^^a0_W1ac/NOGRPWILD, wild card group numbers not allowedty;Wildcard characters are not allowed in the UIC group number"field for the command you entered.=Reenter your command with a specific UIC group number insteadof a wildcard character.__a-u1^`,NAFDONEMSG, network proxy database modifiedty;The network user authorization file (NETPROXY.DAT) has been8modified to reflect the change directed by your command.None.``a ),/1Z\(DEFERR, unable to obtain DEFAULT recordty+This message is issued with other messages..Take action based on the accompanying message.aaa.a1_a-NAFMAXEX, exceeded maximum local proxy countty>You attempted to add more than the system-specified maximum of!16 local users to a proxy record.=Rethink the strategy being used that requires this many local9users for a single remote user. Try using multiple remoteThe identifier name specified could not be added to the rights;database file (RIGHTSLIST.DAT). Most likely, the identifier:name already exists in the rights database file. Duplicate=identifier names are not allowed in the rights database file.rights database file (RIGHTSLIST.DAT); if the UIC has not been>changed, it will conflict with the UIC of the original record,+and a 'duplicate identifier' error results.user authorization file and you want an identifier for the new#]A1o~=FLUNOTGEN, Floating point underflow exception not generated.nt Test Package8The UETP vector processor device test failed to induce a#floating-point underflow exception.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.9#M\1jy"8REDFLGERR, error reading UETP common event flag clusternt Test PackageCorrect the problem and rerun the test. If the error persists,contact HP Customer Support.? =#A1n}QThe current process finished copying the log file specified bythe UETP$_COPY_LOG message.None. 1 #1HW COPY_LOG_LINE, 'text'nt Test Package;The current process is copying a line of the file specifiedS#A1\;LVSSBTER, error encountered testing longword vector-scalar subtractionnt Test Package=The vector processor device test encountered a hardware errorGFVSADDER, error encountered testing g_floating vector-scalar additionnt Test Package=The vector processor device test encountered a hardware error:during g_floating vector-scalar arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.ER T#A1W>GFVSDIVER, error encountered testing g_floating vector-scalar divisionnt Test Package=The vector processor device test encountered a hardware error:during g_floating vector-scalar arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.KS Z#A1]>GFVSMLTER, error encountered testing g_floating vector-scalar multiplicationnt Test Package=The vector processor device test encountered a hardware error:during g_floating vector-scalar arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.HT W#A1Z>GFVSSBTER, error encountered testing g_floating vector-scalar subtractionnt Test Package=The vector processor device test encountered a hardware error:during g_floating vector-scalar arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.EU T#A1W>GFVVADDER, error encountered testing g_floating vector-vector additionnt Test Package=The vector processor device test encountered a hardware error:during g_floating vector-vector arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.EV T#A1W>GFVVDIVER, error encountered testing g_floating vector-vector divisionnt Test Package=The vector processor device test encountered a hardware error:during g_floating vector-vector arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.KW Z#A1]>GFVVMLTER, error encountered testing g_floating vector-vector multiplicationnt Test Package=The vector processor device test encountered a hardware error:during g_floating vector-vector arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport. HX W#A1Z>GFVVSBTER, error encountered testing g_floating vector-vector subtractionnt Test Package=The vector processor device test encountered a hardware error:during g_floating vector-vector arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.!!fD#1uQ CSYSSRVERR, error encountered during vector system services testingnt Test Package=The vector processor device test encountered an error testing7system services.This error is received in relation to a=previously displayed error condition or could indicate a moreserious OpenVMS problem.Correct the problem and rerun the test. If the error persists,contact HP Customer Support.## r B#XX1s2ACTXSTSERR, error obtaining vector context test subprocess statusnt Test Package5The vector processor device test encountered an error!following vector context testing.:Correct problem and rerun the test. If the error persists,contact HP Customer Support.$$ r6#M\1gv5MBXCRTERR, error creating vector information mailboxnt Test PackageCorrect the problem and rerun the test. If the error persists,contact HP Customer Support.%%u:#M\1kz#9MBXREDERR, error reading from vector information mailboxnt Test PackageCorrect the problem and rerun the test. If the error persists,contact HP Customer Support.&&v8#M\1ix!7MBXWRTERR, error writing to vector information mailboxnt Test PackageCorrect the problem and rerun the test. If the error persists,contact HP Customer Support.''{.#M\1_n-MSTINTERR, error initializing master processnt Test PackageCorrect the problem and rerun the test. If the error persists,contact HP Customer Support.((} c#71=DATADEVERR, data error on 'device-name' byte 'location' good$ data='xx' bad data='xx'nt Test Package;One of the UETP tests detects a difference between the data;written from memory and the same data after it is read back;into memory. The 'location' is the offset from the start of2the buffer where the first difference is detected.6Investigate the device or mechanism causing the error.))~ i#71BDATAER, data error on 'device-type' unit 'number' byte 'location'% good data='xx' bad data='xx'nt Test Package;One of the UETP tests detects a difference between the data;written from memory and the same data after it is read back;into memory. The 'location' is the offset from the start of.the buffer where the first difference is seen.6Investigate the device or mechanism causing the error.**~S#1Y(>RLSSRVERR, error encountered while testing $RELEASE_VP system servicent Test Package=The vector processor device test encountered an error testing8system services. This error is received in relation to a=previously displayed error condition or could indicate a moreserious problem.Correct the problem and rerun the test. If the error persists,contact HP Customer Support.,,#1?N TEXT, 'text'nt Test Package9UETP tests use this message to convey information that isIn most cases, this message by itself requires no user action;>take action based on the accompanying message. In other cases,2the text should explain the nature of the problem.--<#M\1m|%;ASTRPDFER, error disabling Ctrl-C and Ctrl-Y AST receptionnt Test PackageCorrect the problem and rerun the test. If the error persists,contact HP Customer Support... 6#VA1gv 5INONOTGEN, Integer overflow exception not generated.nt Test Package9The UETP vector processor device test failed to induce aninteger overflow exception.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.//8 =#A1n} JFFVSADDER, Error encountered testing f_floating vector-scalar addition.nt Test Package4The UETP vector processor device test encountered an*f_floating vector-scalar addition failure.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.33E T#A1W>FFVSDIVER, error encountered testing f_floating vector-scalar divisionnt Test Package=The vector processor device test encountered a hardware error:during f_floating vector-scalar arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.44K Z#A1]>FFVSMLTER, error encountered testing f_floating vector-scalar multiplicationnt Test Package=The vector processor device test encountered a hardware error:during f_floating vector-scalar arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.55H W#A1Z>FFVSSBTER, error encountered testing f_floating vector-scalar subtractionnt Test Package=The vector processor device test encountered a hardware error:during f_floating vector-scalar arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.66#C#1tZ5BJPITSTERR, error encountered while testing $GETJPI system servicent Test Package=The vector processor device test encountered an error testing8system services. This error is received in relation to a=previously displayed error condition or could indicate a more!serious operating system problem.FFVVADDER, error encountered testing f_floating vector-vector additionnt Test Package=The vector processor device test encountered a hardware error:during f_floating vector-vector arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.88E T#A1W>FFVVDIVER, error encountered testing f_floating vector-vector divisionnt Test Package=The vector processor device test encountered a hardware error:during f_floating vector-vector arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.99R:#P1kzd9CLREFCFER, error clearing UETP common event flag clusternt Test Package>The vector processor device test encountered an error prior toits termination.=If UETP completes successfully, ignore this error. Otherwise,>correct the problem and rerun the test. If the error persists,contact HP Customer Support.::K Z#A1]>FFVVMLTER, error encountered testing f_floating vector-vector multiplicationnt Test Package=The vector processor device test encountered a hardware error:during f_floating vector-vector arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.;;H W#A1Z>FFVVSBTER, error encountered testing f_floating vector-vector subtractionnt Test Package=The vector processor device test encountered a hardware error:during f_floating vector-vector arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.<<?=#A1n}QA vector processor device test subordinate process encounteredan error during testing.>Correct the problem and rerun the test. If the error persists,contact HP Customer Support.>> <#1m|O;VECCTXERR, error encountered during vector context testingnt Test Package5The vector processor device test encountered an error9initiating vector context testing. This error is received>in relation to a previously displayed error condition or could#indicate a vector hardware problem.Correct the problem and rerun the test. If the error persists,contact HP Customer Support.@@j ;#C1l{|:DENOSU, 'test-name' device 'device-type' is not supportednt Test Package:The specified device name is unknown to UETP and cannot betested.1Zi(INSVIRMEM, insufficient virtual memory.nt Test PackageA device that passed the simple read/write test in the initial9phase of UETP cannot complete its test in the device testphase.6If you think that the device should be tested by UETP,:investigate and correct the problem; otherwise, ignore themessage.FF1#!1bq0ABORTC, 'test-name' to abort this test, type ^Cnt Test Package7The image displaying this message responds to Ctrl/C by9terminating gracefully (deassigning all logical names and6deleting all files) and passing control to the command8language interpreter. You cannot restart the image after7pressing Ctrl/C. Use Ctrl/Y to temporarily interrupt animage.None.GG1#M\1bq0SUBSCHERR, error scheduling subordinate processnt Test PackageCorrect the problem and rerun the test. If the error persists,contact HP Customer Support.HH<#{1m|;VECTOR, testing to be performed on 'xxx' vector processorsnt Test Package9The vector processor device test detected the presence of9'xxx' vector processors installed and enabled on the hostsystemNone.II/#M\1`o.SUBSPNERR, error spawning subordinate processnt Test PackageCorrect the problem and rerun the test. If the error persists,contact HP Customer Support.JJ9<#I1m|K;BARCRTERR, Error creating process synchronization barrier.nt Test Package8The UETP vector processor device test failed to create ato explain why the device failed the test. Possibly the device=is down, off line, not mounted, not initialized, or not writeenabled.The UETP vector processor device test failed to synchronize at8the barrier. The RTL routine PPL$WAIT_AT_BARRIER failed.7Take action based on the associated PPL$WAIT_AT_BARRIERcondition values.MM57#t\1hwG6SUBSTSERR, error obtaining subordinate process statusnt Test Package=The vector processor device test encountered an error that is5the result of a previously displayed error condition.>Correct the problem and rerun the test. If the error persists,contact HP Customer Support.NN=#p@1n}-Correct the problem and rerun the test. If the error persists,contact HP Customer Support.TT? D#A1uQCFLOVNORCV, expected floating point overflow exception not receivednt Test Package7The vector processor device test encountered a hardwareperiod of time, waiting for the disk server to recover and forthe device to come on line.9Attempt to connect to the MSCP server for this device. If:there is a serious problem, abort now. Otherwise, continue>retrying over a period of time, while allowing the disk serversome time to recover or reboot.YY.#$L1Td0"NOCONTIG, bootfile not contiguousCluster Software=The file SYSBOOT.EXE is noncontiguous on the system disk. The;primitive bootstrap file system cannot read a noncontiguousfile.>Rebuild the system disk to obtain enough contiguous free space for SYSBOOT.ZZ/@$O1q?NOCONVBOOT, not authorized to perform conversational bootstrapCluster Software>Conversational bootstrap operations are not authorized for thesatellite node.Consult your system manager.[[3 $:.1QaUNEXPERR, unexpected exceptionCluster Software9A hardware exception occurred during bootstrap execution.-Run diagnostics to check for hardware errors.\\4 $:a1QaUNEXPERR, unexpected interruptCluster Software9An unknown interrupt occurred during bootstrap execution.6Try the operations again. If the problem persists, run)diagnostics to check for hardware errors.]]r=*$c1[k)UNKCPU, unknown or unsupported processorCluster Software9The system is not supported as a satellite node with this(version of the OpenVMS operating system.7Refer to the OpenVMS Software Product Description (SPD)6for supported OpenVMS Cluster configurations and check;which versions of the OpenVMS operating system support your processor.^^D+$!1\l*IVBUFLEN, disk boot driver invalid bufferCluster Software An internal MSCP error occurred.Contact HP Customer Support.__^.$+1_o-SYSLOAD, system loaded from node 'node-name'Cluster Software*The NISCS bootstrap is starting execution.None.``d%$`[1Vf!$BADOPEN, unable to locate BOOT fileCluster Software>SYSBOOT.EXE is not found or is not accessible in the specified satellite system root directory.An invalid load assist parameter was specified with the systemroot specification.3Shorten the file specification for the system root.bbo 3$1dt2CTRLERR, disk boot driver virtual circuit failureCluster Software:The satellite could not establish a virtual circuit to the=MSCP server on the boot node, or it received a hardware errorduring communications.=Check that the MSCP server is loaded on the boot node, verifysatellite's SYSGEN parameter file, VAXVMSSYS.PAR, were not set properly.=Check the MOP database using the NCP command SHOW NODE 'node-Check that the configuration matches the minimum guidelines in=the Software Product Description (SPD). If they do not match,=add more memory. Run diagnostics on memory to verify that allsystem memory is functional.''$L1Xh9&PARITY, disk boot driver parity errorCluster Software>A hardware error occurred during a transfer from the satellite system disk.>Check the error log for both the Ethernet and system disk, runCheck the error log for the disk. Either run diagnostics on itor contact HP Customer Support.8$A1O_JNOSUCHDEV, nonexistent driveCluster Software:A nonexistent drive was specified for the satellite systemdisk.8Check the load assist parameter specification in the MOP:database. Ensure that the correct system disk is specified5and make sure it is served using the correct command. .$T<1_o-DEVNOTKNWN, unable to locate datalink driverCluster Software5An attempt is being made to boot a satellite using anunsupported Ethernet adapter.;Check for an unsupported Ethernet adapter on the satellite. /$A1`p.DEVNOTKNWN, unable to locate disk boot driverCluster Software5This message indicates an internal error in the NISCS bootstrap.Contact HP Customer Support."$?A1Sc!MCHECK, unexpected Machine CheckCluster Software3A machine check exception occurred during bootstrap execution.6Run diagnostics on the satellite to check for hardware problems.test encountered an error duringinitialization.Contact HP Customer Support. [/ 5#1fugm4COPY_LOG, copy of log from 'log-file-name' follows:nt Test Package9The current process has been created and is communicating9with other processes in UETP. To centralize the reporting7of information about the progress of UETP, this process:is copying the log file from the execution of one of those processes.None. 0 2#[1cr1COPY_LOG_ENDED, end of log file from 'file-spec'nt Test Package>The current process finished copying the log file specified bythe UETP$_COPY_LOG message.None. 1 #1HW COPY_LOG_LINE, 'text'nt Test Package;The current process is copying a line of the file specifiedS#A1\;LVSSBTER, error encountered testing longword vector-scalar subtractionnt Test Package=The vector processor device test encountered a hardware errorGFVSADDER, error encountered testing g_floating vector-scalar additionnt Test Package=The vector processor device test encountered a hardware error:during g_floating vector-scalar arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.ER T#A1W>GFVSDIVER, error encountered testing g_floating vector-scalar divisionnt Test Package=The vector processor device test encountered a hardware error:during g_floating vector-scalar arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.KS Z#A1]>GFVSMLTER, error encountered testing g_floating vector-scalar multiplicationnt Test Package=The vector processor device test encountered a hardware error:during g_floating vector-scalar arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.HT W#A1Z>GFVSSBTER, error encountered testing g_floating vector-scalar subtractionnt Test Package=The vector processor device test encountered a hardware error:during g_floating vector-scalar arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.EU T#A1W>GFVVADDER, error encountered testing g_floating vector-vector additionnt Test Package=The vector processor device test encountered a hardware error:during g_floating vector-vector arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.EV T#A1W>GFVVDIVER, error encountered testing g_floating vector-vector divisionnt Test Package=The vector processor device test encountered a hardware error:during g_floating vector-vector arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.KW Z#A1]>GFVVMLTER, error encountered testing g_floating vector-vector multiplicationnt Test Package=The vector processor device test encountered a hardware error:during g_floating vector-vector arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport. HX W#A1Z>GFVVSBTER, error encountered testing g_floating vector-vector subtractionnt Test Package=The vector processor device test encountered a hardware error:during g_floating vector-vector arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.!!fD#1uQ CSYSSRVERR, error encountered during vector system services testingnt Test Package=The vector processor device test encountered an error testing7system services.This error is received in relation to a=previously displayed error condition or could indicate a moreserious OpenVMS problem.Correct the problem and rerun the test. If the error persists,contact HP Customer Support.## r B#XX1s2ACTXSTSERR, error obtaining vector context test subprocess statusnt Test Package5The vector processor device test encountered an error!following vector context testing.:Correct problem and rerun the test. If the error persists,contact HP Customer Support.$$ r6#M\1gv5MBXCRTERR, error creating vector information mailboxnt Test PackageCorrect the problem and rerun the test. If the error persists,contact HP Customer Support.%%u:#M\1kz#9MBXREDERR, error reading from vector information mailboxnt Test PackageCorrect the problem and rerun the test. If the error persists,contact HP Customer Support.&&v8#M\1ix!7MBXWRTERR, error writing to vector information mailboxnt Test PackageCorrect the problem and rerun the test. If the error persists,contact HP Customer Support.''{.#M\1_n-MSTINTERR, error initializing master processnt Test PackageCorrect the problem and rerun the test. If the error persists,contact HP Customer Support.((} c#71=DATADEVERR, data error on 'device-name' byte 'location' good$ data='xx' bad data='xx'nt Test Package;One of the UETP tests detects a difference between the data;written from memory and the same data after it is read back;into memory. The 'location' is the offset from the start of2the buffer where the first difference is detected.6Investigate the device or mechanism causing the error.))~ i#71BDATAER, data error on 'device-type' unit 'number' byte 'location'% good data='xx' bad data='xx'nt Test Package;One of the UETP tests detects a difference between the data;written from memory and the same data after it is read back;into memory. The 'location' is the offset from the start of.the buffer where the first difference is seen.6Investigate the device or mechanism causing the error.**~S#1Y(>RLSSRVERR, error encountered while testing $RELEASE_VP system servicent Test Package=The vector processor device test encountered an error testing8system services. This error is received in relation to a=previously displayed error condition or could indicate a moreserious problem.Correct the problem and rerun the test. If the error persists,contact HP Customer Support.,,#1?N TEXT, 'text'nt Test Package9UETP tests use this message to convey information that isIn most cases, this message by itself requires no user action;>take action based on the accompanying message. In other cases,2the text should explain the nature of the problem.--<#M\1m|%;ASTRPDFER, error disabling Ctrl-C and Ctrl-Y AST receptionnt Test PackageCorrect the problem and rerun the test. If the error persists,contact HP Customer Support... 6#VA1gv 5INONOTGEN, Integer overflow exception not generated.nt Test Package9The UETP vector processor device test failed to induce aninteger overflow exception.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.//8 =#A1n} JFFVSADDER, Error encountered testing f_floating vector-scalar addition.nt Test Package4The UETP vector processor device test encountered an*f_floating vector-scalar addition failure.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.33E T#A1W>FFVSDIVER, error encountered testing f_floating vector-scalar divisionnt Test Package=The vector processor device test encountered a hardware error:during f_floating vector-scalar arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.44K Z#A1]>FFVSMLTER, error encountered testing f_floating vector-scalar multiplicationnt Test Package=The vector processor device test encountered a hardware error:during f_floating vector-scalar arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.55H W#A1Z>FFVSSBTER, error encountered testing f_floating vector-scalar subtractionnt Test Package=The vector processor device test encountered a hardware error:during f_floating vector-scalar arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.66#C#1tZ5BJPITSTERR, error encountered while testing $GETJPI system servicent Test Package=The vector processor device test encountered an error testing8system services. This error is received in relation to a=previously displayed error condition or could indicate a more!serious operating system problem.FFVVADDER, error encountered testing f_floating vector-vector additionnt Test Package=The vector processor device test encountered a hardware error:during f_floating vector-vector arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.88E T#A1W>FFVVDIVER, error encountered testing f_floating vector-vector divisionnt Test Package=The vector processor device test encountered a hardware error:during f_floating vector-vector arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.99R:#P1kzd9CLREFCFER, error clearing UETP common event flag clusternt Test Package>The vector processor device test encountered an error prior toits termination.=If UETP completes successfully, ignore this error. Otherwise,>correct the problem and rerun the test. If the error persists,contact HP Customer Support.::K Z#A1]>FFVVMLTER, error encountered testing f_floating vector-vector multiplicationnt Test Package=The vector processor device test encountered a hardware error:during f_floating vector-vector arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.;;H W#A1Z>FFVVSBTER, error encountered testing f_floating vector-vector subtractionnt Test Package=The vector processor device test encountered a hardware error:during f_floating vector-vector arithmetic instruction settesting.7Run diagnostics for VAX vectors, or contact HP CustomerSupport.<<?=#A1n}QA vector processor device test subordinate process encounteredan error during testing.>Correct the problem and rerun the test. If the error persists,contact HP Customer Support.>> <#1m|O;VECCTXERR, error encountered during vector context testingnt Test Package5The vector processor device test encountered an error9initiating vector context testing. This error is received>in relation to a previously displayed error condition or could#indicate a vector hardware problem.Correct the problem and rerun the test. If the error persists,contact HP Customer Support.@@j ;#C1l{|:DENOSU, 'test-name' device 'device-type' is not supportednt Test Package:The specified device name is unknown to UETP and cannot betested.1Zi(INSVIRMEM, insufficient virtual memory.nt Test PackageA device that passed the simple read/write test in the initial9phase of UETP cannot complete its test in the device testphase.6If you think that the device should be tested by UETP,:investigate and correct the problem; otherwise, ignore themessage.FF1#!1bq0ABORTC, 'test-name' to abort this test, type ^Cnt Test Package7The image displaying this message responds to Ctrl/C by9terminating gracefully (deassigning all logical names and6deleting all files) and passing control to the command8language interpreter. You cannot restart the image after7pressing Ctrl/C. Use Ctrl/Y to temporarily interrupt animage.None.GG1#M\1bq0SUBSCHERR, error scheduling subordinate processnt Test PackageCorrect the problem and rerun the test. If the error persists,contact HP Customer Support.HH<#{1m|;VECTOR, testing to be performed on 'xxx' vector processorsnt Test Package9The vector processor device test detected the presence of9'xxx' vector processors installed and enabled on the hostsystemNone.II/#M\1`o.SUBSPNERR, error spawning subordinate processnt Test PackageCorrect the problem and rerun the test. If the error persists,contact HP Customer Support.JJ9<#I1m|K;BARCRTERR, Error creating process synchronization barrier.nt Test Package8The UETP vector processor device test failed to create ato explain why the device failed the test. Possibly the device=is down, off line, not mounted, not initialized, or not writeenabled.The UETP vector processor device test failed to synchronize at8the barrier. The RTL routine PPL$WAIT_AT_BARRIER failed.7Take action based on the associated PPL$WAIT_AT_BARRIERcondition values.MM57#t\1hwG6SUBSTSERR, error obtaining subordinate process statusnt Test Package=The vector processor device test encountered an error that is5the result of a previously displayed error condition.>Correct the problem and rerun the test. If the error persists,contact HP Customer Support.NN=#p@1n}-Correct the problem and rerun the test. If the error persists,contact HP Customer Support.TT? D#A1uQCFLOVNORCV, expected floating point overflow exception not receivednt Test Package7The vector processor device test encountered a hardwareperiod of time, waiting for the disk server to recover and forthe device to come on line.9Attempt to connect to the MSCP server for this device. If:there is a serious problem, abort now. Otherwise, continue>retrying over a period of time, while allowing the disk serversome time to recover or reboot.YY.#$L1Td0"NOCONTIG, bootfile not contiguousCluster Software=The file SYSBOOT.EXE is noncontiguous on the system disk. The;primitive bootstrap file system cannot read a noncontiguousfile.>Rebuild the system disk to obtain enough contiguous free space for SYSBOOT.ZZ/@$O1q?NOCONVBOOT, not authorized to perform conversational bootstrapCluster Software>Conversational bootstrap operations are not authorized for thesatellite node.Consult your system manager.[[3 $:.1QaUNEXPERR, unexpected exceptionCluster Software9A hardware exception occurred during bootstrap execution.-Run diagnostics to check for hardware errors.\\4 $:a1QaUNEXPERR, unexpected interruptCluster Software9An unknown interrupt occurred during bootstrap execution.6Try the operations again. If the problem persists, run)diagnostics to check for hardware errors.]]r=*$c1[k)UNKCPU, unknown or unsupported processorCluster Software9The system is not supported as a satellite node with this(version of the OpenVMS operating system.7Refer to the OpenVMS Software Product Description (SPD)6for supported OpenVMS Cluster configurations and check;which versions of the OpenVMS operating system support your processor.^^D+$!1\l*IVBUFLEN, disk boot driver invalid bufferCluster Software An internal MSCP error occurred.Contact HP Customer Support.__^.$+1_o-SYSLOAD, system loaded from node 'node-name'Cluster Software*The NISCS bootstrap is starting execution.None.``d%$`[1Vf!$BADOPEN, unable to locate BOOT fileCluster Software>SYSBOOT.EXE is not found or is not accessible in the specified satellite system root directory.An invalid load assist parameter was specified with the systemroot specification.3Shorten the file specification for the system root.bbo 3$1dt2CTRLERR, disk boot driver virtual circuit failureCluster Software:The satellite could not establish a virtual circuit to the=MSCP server on the boot node, or it received a hardware errorduring communications.=Check that the MSCP server is loaded on the boot node, verifysatellite's SYSGEN parameter file, VAXVMSSYS.PAR, were not set properly.=Check the MOP database using the NCP command SHOW NODE 'node-(VMB.EXE) was executing. This condition may indicate a corrupt%SYSBOOT.EXE file or hardware failure.:Determine the source of the error, and either obtain a new7copy of the system disk or contact HP Customer Support. ]\ s1QUnBOOT-F-Unexpected machine checkBoot6An unexpected machine check occurred while the primary>bootstrap (VMB.EXE) was executing. This condition may indicate/a corrupt SYSBOOT.EXE file or hardware failure.:Determine the source of the error, and either obtain a new7copy of the system disk or contact HP Customer Support. ]@i1OSVMB-F-Bootfile not contiguousBoot3The file [SYSEXE]SYSBOOT.EXE is located, but is not contiguous.2The disk you are attempting to bootstrap cannot be5bootstrapped. Obtain another copy of the system disk. ]"wD1SW!VMB-F-Failed to initialize deviceBoot;An error was encountered in the load path while the OpenVMS:operating system was trying to initialize the boot device.:Try initializing again. If this fails, contact HP CustomerSupport. ]"X]1SW !VMB-F-I/O error reading boot fileBoot3An uncorrectable read error occurred while the file#[SYSEXE]SYSBOOT.EXE was being read.;Try rebooting the disk. If subsequent attempts fail, obtain another copy of the system disk.]+s1IMxVMB-F-Nonexistent driveBoot*The specified drive number does not exist.=Specify an appropriate device unit to the console program, or4use a different console bootstrap command procedure.]!11RV VMB-F-Unable to locate BOOT fileBoot0The file [SYSEXE]SYSBOOT.EXE could not be found.1qz?RELMOVED, Product's release notes have been moved to SYS$HELP.rocedures=VMSINSTAL moved the product's release notes file to SYS$HELP.Contact HP Customer Support.] AR1r{@ILLSAVESET, illegal save set name specified to RESTORE_SAVESET.rocedures=The product installation procedure contains an incorrect callto RESTORE_SAVESET.Contact HP Customer Support.]J8l~1ir\7LOWQUOTA, the following account quotas may be too low:rocedures>When VMSINSTAL begins an installation, it makes sure that your,process quotas are valid. This check failed.>You are asked if you want to continue the installation. Compaq>recommends that this situation is corrected before continuing.],U]1 =NOCONSOLE, unknown CPU type number. Console volume cannot be remounted.rocedures9While attempting to remount the console medium, VMSINSTAL"could not determine your CPU type.Contact HP Customer Support.] />9m1ox=UNEXPECTED, installation terminated due to unexpected event.rocedures8An unexpected event ended the installation of VMSINSTAL.;If you can determine and resolve the problem, reinstall the0product. Otherwise, contact HP Customer Support.]~9B=1s|SAPRODSKIP, Products that have not been installed will be skipped.rocedures;A request was made that multiple products be installed, but:one of these products requires that the system be rebooted9after its installation. To accomplish this, the remaining%uninstalled products must be skipped.VMSINSTAL creates a temporary directory if you specify the Get/Save Set option. This message is informational.None.]{O 1pBEXPIRED, this product has expired after VMS Version 'nnn'. Please= contact your sales representative for this product.rocedures=The product cannot be installed on the current version of the Please refer to the product's installation guide.rocedures/This product cannot be installed with OPTION O.*Refer to the product's installation guide.""]]2\1cl1RESTORE, restoring product save set 'letter' ...rocedures>The Backup utility is restoring the specified product save setfrom the distribution media.None.##]_,P_1]f+IVPFAIL, the IVP for 'product' has failed.rocedures5The installation verification procedure (IVP) for thespecified product failed.6If the problem can be resolved, reinstall the product.'Otherwise, contact HP Customer Support.$$]zhA 1r{@MOVEFILES, files will now be moved to their target directories.rocedures9If sufficient disk space is available at the beginning of8an installation, VMSINSTAL builds new files in a working;directory for the optional product or update. After all theThe main installation procedure for the product is not locatedon the distribution media.Contact HP Customer Support.&&]k5Q*1fo4NOPRODS, None of the specified products were found.roceduresThe installation was canceled by pressing Ctrl/Y. This messageis informational.None.((]vr0/1ajY/REWIND, the tape will be rewound to try again.rocedures>VMSINSTAL is attempting to restore a product save set with the;Backup utility. It cannot find the required save set on theVMSINSTAL cannot find an existing (or new) file with the givenname.;If you can determine and correct the problem, reinstall the0product. Otherwise, contact HP Customer Support.,,]/j1`i.UPDATED, file 'file-name' is already updated.rocedures=VMSINSTAL is attempting to update a system text file, but the+file has already been updated successfully.None.--]t dM19CDCLHLPINUSE, Trying to update DCL HELP library. Procedure will try three more times.rocedures>The DCL Help library is in use while an installation is taking>place. The installation procedure will try three more times toupdate the DCL Help library.=Determine who is accessing DCL Help and have them temporarilyexit DCL Help...](x1Yb'USEANS, auto-answer file will be used.rocedures6The Autoanswer option was specified when VMSINSTAL was2started. The recorded answers will be used for the installation.:Prompts and questions displayed by the product do not have9to be answered. If you want to record new answers, delete;the answer file and install the product with the Autoansweroption.//]<#1mv;AUTOANS, mode does not allow input. Generating a password.rocedures"Process was running in BATCH mode.None.00]1KW1bk 0BADSPEC, file spec 'file-spec' cannot be parsedrocedures;VMSINSTAL cannot locate the file because of an invalid filespecification.9Resolve the problem and reinstall the product. Otherwise,contact HP Customer Support.11]) 5L1fo;4INSDFAIL, the installation of a product has failed.rocedures=An error occurred in an attempt to defer callbacks during the installation.8Examine the console output to determine the cause of the=error. If the problem cannot be resolved, contact HP CustomerSupport.22]<j1mvS;AUTOSYNC, auto-answer file is not in synch with questions.rocedures;The Autoanswer option was specified, and VMSINSTAL is usingA backup error occurred while re-creating the save sets in the7processing of the GET option. The operation is aborted.=Make sure the specified output device holds media that is notwrite-protected.66]5-sm1^gG,BADACC, unable to ADD/MODIFY account 'name'rocedures:The product being installed tried either to add an account7that already exists or to modify a nonexistent account.;If you can determine and resolve the problem, reinstall the0product. Otherwise, contact HP Customer Support.77]]9z1jso8NOTSYSTEM, you are not logged in to the SYSTEM account.rocedures=When VMSINSTAL begins an installation, it makes sure that you;are logged in to the SYSTEM account. This check has failed.;You will be asked if you want to continue the installation.9Compaq recommends that this situation be corrected before continuing.88];0vm1ajM/BADACC, unable to CREATE/MODIFY account 'name'rocedures=The product being installed tried either to create an account7that already exists or to modify a nonexistent account.;If you can determine and resolve the problem, reinstall the0product. Otherwise, contact HP Customer Support.99]^Dt~1u~pCNOSETPRV, You are not running on an account with SETPRV privilege.rocedures>When VMSINSTAL begins an installation, it makes sure that your4account has the SETPRV privilege. This check failed.>You are asked if you want to continue the installation. Compaq>recommends that this situation be corrected before continuing.::] >eB1ox=INVOPTIONS, to specify options, parameter 3 must be OPTIONS.rocedures=If VMSINSTAL options are being specified, the third parameter&to VMSINSTAL must be the word OPTIONS.9Restart VMSINSTAL, and specify the options in the correctformat.;;]9;$1js8BADCONDEV, console device 'device-name' does not exist.rocedures:The specified console device does not exist on the system.#Specify a different console device.<<]??K1pyQ>BADSYSLDBL, ADD not done. One or more parameters are invalid.rocedures8The installation procedure cannot add the loadable image;description to the indexed file because it cannot interpretone or more parameters.>]#eAU15Restore the correct image from the OpenVMS kit and restart theproduct installation.??]'+ 1\en9*CANNOTVAL, cannot validate 'kit-file-name'rocedures6The VMSINSTAL Installation utility could not validate ;the product kit. This is an informational message and does 9not signal an error. It indicates that the kit might not 8have gone through the optional signing process that was "introduced in OpenVMS Version 8.4.The installation procedure cannot extract the specified objectfrom the library.4Repair the module or library and restart the product installation.BB]&N1P89NOHPCRTN, failed to load a required HPC file validation  routine:rocedures7The product kit is signed but it could not be validated3because the HPC product is not installed, or it is 4installed but not started. A required HPC shareable &image could not be loaded into memory.8Answer No to the question that follows to terminate the 8operation. Contact your system manager for assistance in7getting HPC operational. Alternatively, you can answer =Yes to proceed with the operation without validating the kit.CC]RF1YI%1ox=SHUTDOWN, This product requires that the system be rebooted.rocedures>This product cannot be installed properly unless the system is rebooted.$Reboot the OpenVMS operating system.HH]2E1cl1STRTUPNOREM, File not found in startup database.rocedures:The file you want to remove cannot be found in the startup database.None.II]1g1bk0STRTUPBADPAR, Phase or Mode parameter not validroceduresAn attempt is being made to install a product on a remote node&that is either unknown or unavailable.;Specify an existing node name or try the installation again when the node becomes available.PP]4k1en3BADDISDEV, Device 'device' must be a disk or tape.rocedures9The device you specified as the one on which to mount the0distribution media is neither a disk nor a tape.Specify a disk or tape device.QQ]*BlT1s|<ANOACCMAN, account manipulation on alternate roots not supported.rocedures>The product being installed to an alternate system root cannot,update the user authorization file (SYSUAF).ACCOUNT, this installation adds an identifier named 'id-name'roceduresThe product being installed (or updated) changed an identifier=with the specified name. The user authorization file (SYSUAF)has been updated accordingly.None.VV]3 51fo?E4DEVMNT, device 'device-name' will be 'mount-status'rocedures>The device specified for the output of the Get Save Set option:is initialized (if it is a disk) and mounted. This message:appears only if the output device specified is not mountedwhen VMSINSTAL is started.None.WW]21cl1RECORDANS, An auto-answer file will be recorded.rocedures6The Autoanswer option was specified when VMSINSTAL was:installed. An answer file will be recorded for the productabout to be installed.Answer the prompts as usual.XX] 3O1dm2DEVNOTEXIST, device 'device-name' does not exist.rocedures>The device specified for the output of the Get Save Set optiondoes not exist.Specify a valid device name.YY]9P1js8NULSAVESET, save set name specified to RESTORE_SAVESET.rocedures>A product installation procedure contains an incorrect call toRESTORE_SAVESET.Contact HP Customer Support.ZZ]XG_MSG, DECdtm Gatew3-#y1d}2ERR_NOCREATE, Failed to create gateway domain logay Control Program (XGCP)"The log file could not be created.;Ensure that a valid log file size is entered, that there is> !?? "@@ $ AA )BB )CC *DD ,EE , FF -GG 7HH :II ;JJ @KK BLL IMM XNN ]OO ]PP _QQ aRR cSS iTT iUU mVV pWW q XX r YY uZZ v[[ v\\ ~]] ^^ __ `` aa bb cc dd ee  ff  gg hh ii  jj  kk  ll  mm nn oo pp qq rr ss tt uu vv ww xx yy zz {{ || }} ~~                DENIED ED   `         FAILIBILITY  LE  P a p          NG  ;  [  \  ]  `                     XPIREDFILERRGPTERRINDEXF M OMMODATEf   NFLICT UNT     4  [ \ ] _ ` a b d                 INGLOCK S^QFILEUOTARUJERRTWOSHR UMULATEDk   OR~RATE VIO WAITDONE_AIJBIJRUJ E ! 5 = R       S^ HIEVE  K Ld           EMPTY  FULL   ME ;$SERVERN_SERVERS T NTEXCPIROFFSETQ   P        ) *   2!! @"" A## J $$ U%% V&& _ '' _(( ` )) u** z ++ |,, -- .. // 00 11  22  33 44 55 66 77 88 99 :: ;; << == >> ?? @@ IAA BBNITCCMBFAILDDNAMEEEOCTLFFKSTKGGVIRTHHRECURSIITIMEJJUNSTAKKKVAFAILLL ULMMQUIRE NN OO  PP QQROSSRR  SS STTIGNUU TVVERRWWIMAGEXX ONYY ZZ  [[ ?\\ H]] M^^ [__  `` aa bb cc ddLEN ee S}ffVATE gg W hh ii  D1jjINGkk  ll mm nn oo pp  qq Err  ss  tt  uu  vv ww  xx "yy &zz ({{ )|| , }} ;~~ ; ?  C J M O S Y  [ s t x x |                       BCB  LY ITY : UALx VINORCV NOTGEN_LSS_MPDAPTER# % 5 : H X     _OK  D  " , - 6 = ? C O ^ g h k l          ED    % & 6  < = H a b          NDNOTZERO RR FIL ING    + TION< A Q  U       AL @ l MSGQUOTA R    V      1  2 ESS                                       ! ! " '   '!! -"" - ## 4$$ 6%% 8&& < '' >(( A)) E** H++ I,, L-- N.. O// O00 R11 T22 U33 V44 [55 \ 66 _77 e88 h99 i:: j;; l<< m== n>> o?? s@@ tAA uBB uCC {DD  EE FF GG HH II JJ KK LL MM NN  OO PP QQ RR SS TT UU VV WW XX YY ZZ [[ \\ ]] ^^ __ `` aa bb  cc dd ee ff gg hh ii jj kk ll  mm nn oo pp qq rr  ss tt uu vv ww xx yy zz {{ || }} ~~          1~  2~  ES%  3   ING  : ^ v y    S JSCROLLREGUSTMENT  SOMIN       ISTRATOR SEC NOTSAVED P R^LSTSYNX WRTDAT VADVCOMPERSENDLLOCNCE D BADFORMATTIM CACHEINIT NTIM!HUID" LILOADFAIL#DEASGN$FCONN%LOAD&OPEN'PARSE(VCHECK)UMPFAIL* ERTISEMENT ING THERMEM+MBX,NICKUID-PRIV.RANDOM/ECBUF0REATE1READ2SETIMR3OLCOMP4TIMERR5UIDNICK6 WRITETHER7 ECREATED8 S     DECERRENCERRFINERRINIERRMIXDESNODATAFUNCFFINITY NOTSAVED9TER       . = = > E F G  O  W c l y                  GAIN : ^  l q r   ST  5 S c      ENT)   E   H   QDBFULLD LOADFAILE SD GY ~CNTYREGATEY m n ~  ID;EST<JDEVFID=REQ>LARMM S>CPHD?  SMBCLR@!!ERTB"" EDA## _NESTINGB$$ FNOMATCHy%% WILCRDREQz&&GNOTGENC''SPEC((ONEWAY))RITHMU** ++ ,, -- .. // 00 11 22 33 44 55 66 77 88 99 :: ;;  S<<SUBNOT==HOMERRD>>INVE??IAS@@ 8AA 9BB FCC GDD |EE FF GGINUSEFHH IIQUALGJJ GN7 KK HLLDISKIMM EDNN OO PP QQ RR $SS -TT :UU VVV bWW cXX tYY uZZ  [[MENT\\ ]] C^^ F__ G`` Haa Ibb Jcc Kdd See Tff Ygg hh ii jj kk ll mm nnXCEEDJoo Kpp Lqq rr  ss  tt uu vv ww xx "yy - zz @{{ B|| V}} W~~ X p q r              OC    LATE    % ( ) * ? @ L {  |         D! @ L M N O  l  s                INGF Q R S T z { | } ~    ON      $ .  ? ? L  O P Z Z ] j  o            CLRMEXTNFAILO P ZLASSV WMEMQ R S TSETUDIFFVTTED W   ABLE ED              * + / 0 D H K \ ^ b c t y z |   }   ~                                        !! "" ## $$ %% && '' (( )) ** ++  ,, -- .. // 00 11 22  33ZEROW44SPOOL55TARTEDX66 NY77 OHUGEPAGEZ88PBFOVF[99 HA:: .;; `<< v== >> ??BETIC'@@ nAADUMPBBNUMERICCC DD SHRNOTBAS\EE Q]FFRCOLGGURTID^HHDYCOMP3IIDCMP4JJSTPPD_KK RT`LLEADY MM  NN  OO PP  QQ  RR SS  TT  UU VV WW XX YY  ZZ  [[ \\ ]] $^^ )__ 2`` 2aa 3bb 4cc 4dd 7 ee 8 ff :gg <hh <ii =jj >kk ? ll @mm @ nn Coo Fpp Fqq Hrr Iss S tt Xuu _vv `ww `xx ayy bzz c {{ e || f}} n~~ o p q  r  s t u  u  x |                                                                                                               LOADEDaSTARTEDbDEFc SOT qTERED fNATE*  D E L d e w IHDBADdPRIRETADDReSIZEf MBDATTIMg IGh iSYMUSEDjUOUS ] g h i j k l m           KEYkPARAMlSYMDEFm DS$CONFIG DEVICE   LISTENING  OUNT  NALYSIS    "   :   ZE     R ING D                 !!  ""  ## $$ %% && '' (( )) **  ++ ,, #-- %.. '// *00 -11 .22 433 444 :55 @ 66 B77 E88 F99 G:: G;; H<< H == H>> H?? I @@ LAA O BB QCC RDD TEE TFF UGG WHH WII XJJ [ KK [LL ]MM `NN b OO d PP eQQ kRR lSS nTT sUU tVV uWW vXX xYY |ZZ ~[[ \\ ]] ^^ __ `` aa bb  cc dd ee ff gg hh ii jj kk ll mm nn oo pp qq  rr ss  tt uu vv  ww xx yy zz {{ || }}  ~~                               GLE InOTHER  1 : =  A C I T f k u v }                 SI ne.ort.ANSIn ~       U    FUNCS OLUTE     1 @ H v                   PSECT TIMREQ!!YMD""VERB## CAx$$_ACTIVEx%% C&&BITMAP''DISERR((EPT)) ** ++ABLE,, ED-- ..INGA// RR00 SS11 22 33 44 55  66  77 88 99 :: ;; <<  ==  >> !?? "@@ $ AA )BB )CC *DD ,EE , FF -GG 7HH :II ;JJ @KK BLL IMM XNN ]OO ]PP _QQ aRR cSS iTT iUU mVV pWW q XX r YY uZZ v[[ v\\ ~]] ^^ __ `` aa bb cc dd ee  ff  gg hh ii  jj  kk  ll  mm nn oo pp qq rr ss tt uu vv ww xx yy zz {{ || }} ~~                DENIED ED   `         FAILIBILITY  LE  P a p          NG  ;  [  \  ]  `                     XPIREDFILERRGPTERRINDEXF M OMMODATEf   NFLICT UNT     4  [ \ ] _ ` a b d                 INGLOCK S^QFILEUOTARUJERRTWOSHR UMULATEDk   OR~RATE VIO WAITDONE_AIJBIJRUJ E ! 5 = R       S^ HIEVE  K Ld           EMPTY  FULL   ME ;$SERVERN_SERVERS T NTEXCPIROFFSETQ   P        ) *   2!! @"" A## J $$ U%% V&& _ '' _(( ` )) u** z ++ |,, -- .. // 00 11  22  33 44 55 66 77 88 99 :: ;; << == >> ?? @@ IAA BBNITCCMBFAILDDNAMEEEOCTLFFKSTKGGVIRTHHRECURSIITIMEJJUNSTAKKKVAFAILLL ULMMQUIRE NN OO  PP QQROSSRR  SS STTIGNUU TVVERRWWIMAGEXX ONYY ZZ  [[ ?\\ H]] M^^ [__  `` aa bb cc ddLEN ee S}ffVATE gg W hh ii  D1jjINGkk  ll mm nn oo pp  qq Err  ss  tt  uu  vv ww  xx "yy &zz ({{ )|| , }} ;~~ ; ?  C J M O S Y  [ s t x x |                       BCB  LY ITY : UALx VINORCV NOTGEN_LSS_MPDAPTER# % 5 : H X     _OK  D  " , - 6 = ? C O ^ g h k l          ED    % & 6  < = H a b          NDNOTZERO RR FIL ING    + TION< A Q  U       AL @ l MSGQUOTA R    V      1  2 ESS                                       ! ! " '   '!! -"" - ## 4$$ 6%% 8&& < '' >(( A)) E** H++ I,, L-- N.. O// O00 R11 T22 U33 V44 [55 \ 66 _77 e88 h99 i:: j;; l<< m== n>> o?? s@@ tAA uBB uCC {DD  EE FF GG HH II JJ KK LL MM NN  OO PP QQ RR SS TT UU VV WW XX YY ZZ [[ \\ ]] ^^ __ `` aa bb  cc dd ee ff gg hh ii jj kk ll  mm nn oo pp qq rr  ss tt uu vv ww xx yy zz {{ || }} ~~          1~  2~  ES%  3   ING  : ^ v y    S JSCROLLREGUSTMENT  SOMIN       ISTRATOR SEC NOTSAVED P R^LSTSYNX WRTDAT VADVCOMPERSENDLLOCNCE D BADFORMATTIM CACHEINIT NTIM!HUID" LILOADFAIL#DEASGN$FCONN%LOAD&OPEN'PARSE(VCHECK)UMPFAIL* ERTISEMENT ING THERMEM+MBX,NICKUID-PRIV.RANDOM/ECBUF0REATE1READ2SETIMR3OLCOMP4TIMERR5UIDNICK6 WRITETHER7 ECREATED8 S     DECERRENCERRFINERRINIERRMIXDESNODATAFUNCFFINITY NOTSAVED9TER       . = = > E F G  O  W c l y                  GAIN : ^  l q r   ST  5 S c      ENT)   E   H   QDBFULLD LOADFAILE SD GY ~CNTYREGATEY m n ~  ID;EST<JDEVFID=REQ>LARMM S>CPHD?  SMBCLR@!!ERTB"" EDA## _NESTINGB$$ FNOMATCHy%% WILCRDREQz&&GNOTGENC''SPEC((ONEWAY))RITHMU** ++ ,, -- .. // 00 11 22 33 44 55 66 77 88 99 :: ;;  S<<SUBNOT==HOMERRD>>INVE??IAS@@ 8AA 9BB FCC GDD |EE FF GGINUSEFHH IIQUALGJJ GN7 KK HLLDISKIMM EDNN OO PP QQ RR $SS -TT :UU VVV bWW cXX tYY uZZ  [[MENT\\ ]] C^^ F__ G`` Haa Ibb Jcc Kdd See Tff Ygg hh ii jj kk ll mm nnXCEEDJoo Kpp Lqq rr  ss  tt uu vv ww xx "yy - zz @{{ B|| V}} W~~ X p q r              OC    LATE    % ( ) * ? @ L {  |         D! @ L M N O  l  s                INGF Q R S T z { | } ~    ON      $ .  ? ? L  O P Z Z ] j  o            CLRMEXTNFAILO P ZLASSV WMEMQ R S TSETUDIFFVTTED W   ABLE ED              * + / 0 D H K \ ^ b c t y z |   }   ~                                        !! "" ## $$ %% && '' (( )) ** ++  ,, -- .. // 00 11 22  33ZEROW44SPOOL55TARTEDX66 NY77 OHUGEPAGEZ88PBFOVF[99 HA:: .;; `<< v== >> ??BETIC'@@ nAADUMPBBNUMERICCC DD SHRNOTBAS\EE Q]FFRCOLGGURTID^HHDYCOMP3IIDCMP4JJSTPPD_KK RT`LLEADY MM  NN  OO PP  QQ  RR SS  TT  UU VV WW XX YY  ZZ  [[ \\ ]] $^^ )__ 2`` 2aa 3bb 4cc 4dd 7 ee 8 ff :gg <hh <ii =jj >kk ? ll @mm @ nn Coo Fpp Fqq Hrr Iss S tt Xuu _vv `ww `xx ayy bzz c {{ e || f}} n~~ o p q  r  s t u  u  x |                                                                                                               LOADEDaSTARTEDbDEFc SOT qTERED fNATE*  D E L d e w IHDBADdPRIRETADDReSIZEf MBDATTIMg IGh iSYMUSEDjUOUS ] g h i j k l m           KEYkPARAMlSYMDEFm DS$CONFIG DEVICE   LISTENING  OUNT  NALYSIS    "   :   ZE     R ING D                 !!  ""  ## $$ %% && '' (( )) **  ++ ,, #-- %.. '// *00 -11 .22 433 444 :55 @ 66 B77 E88 F99 G:: G;; H<< H == H>> H?? I @@ LAA O BB QCC RDD TEE TFF UGG WHH WII XJJ [ KK [LL ]MM `NN b OO d PP eQQ kRR lSS nTT sUU tVV uWW vXX xYY |ZZ ~[[ \\ ]] ^^ __ `` aa bb  cc dd ee ff gg hh ii jj kk ll mm nn oo pp qq  rr ss  tt uu vv  ww xx yy zz {{ || }}  ~~                               GLE InOTHER  1 : =  A C I T f k u v }                 SI ne.ort.}YANSWER2      Y 3          WAY  A r  OPo PLINVKITPALREXIpEARZ     ING  S ND    EDq  | !! ~ ""  Bq## LICATION $$  %% 3&& ` '' p(( ))  ** ++ ,, -- ..  S// ES00 Y11 22 ;33TOERR44 ROPRIATE 55  66  77TEMPUSEr88REFHIGHs99WRTERRt:: QB_;; <<TIMEu== RBTOOBIGv>> CHITECTED5?? URE@@ a AA BB CC VEDD EE FF GG zHH {IIDSBwJJMOVExKKNEWyLLINGwMM xNN yOO zPPNOTDISKzQQ OPENFAIL{RR ESS TT  UU VV WW XX YY "ZZ &[[ *\\ 2 ]] : ^^ ;__ ?`` Kaa Obb P cc Pdd Ree Uff Vgg Xhh ` ii `jj `kk xll zmm ~nn oo pp qq rr ss tt uu vv  ww xx yy zz {{ ||  }} ~~                     A   # $ ; N V  V Y o {                       NSTERR| GLISHOME} TY }   MISMATCH~REQTOOLONG UMENT            , 5 6 > A B D D ` e g h i {                                          SB D J K L M N O `  m  r                  _GTR_32_BITS5 ITHMETIC                                  RAY  (     TRES SCEFCFERNDINGV II       !!  ""  ##TOOLONG$$ %% GNMNTSYN&& '' N(( )) **CNTINV++SETUP,,SEMBLY--RTERR..ION//IGNX00 {11 }22 33 44 55 66CHAN77 ED88 99 ::: F;; <<  ==  >> ??FAIL@@  ED{AAINGNBB oCC pDD EE FFMENT GG (HH =II ~JJ KK LL MM NN OO ST{PPANCE^QQOCIATEDRR SS ,TT hUU jVV WW XX YY ZZ [[ \\ ]] ^^ __ ING``  ONaa bbUMED,cc Tdd ee & ff igg lhh ii jj  kk ll CTXNOTFNDmmDEL`nnFLToo LM_ppTOOLOW_qqRPDFERrrUSPECTss YNCACTIVEttHRONOUS}uu vv ww xx yyWRTERzzTLINE{{OMIC || PC}}ROCLINE~~ RTACH  O Q R    ED  MENT( B C E  SXCONSTOEMPT    9  A  V  Z p t                        ED   & ' ,  ? @ D O U V l y           ING + W q }         Sk  NTIONd eFAILREQREFIBUTE     < E U           S     # J P X [ \ b  z { }            MBXUSETWO WUDIT    = Z ] |                 FAILED|ING #  P c   SRVRUNTHDOWNF ENTICATED     ING  ON      C!! F"" G## O$$ R%% && '' (( )) ** ++ ,, -- .. // 00 11 22 33 44 55  OR"66 77FAIL88 URE99GEN::MATCH;;ISM<< NOTSAVED==ORITY>> ??ZATION@@ AA $BB &CC ' DD (EE + FF 4GG 5 HH ;II <JJ C KK DLL IMM [NN [OO \ PP gQQ RR  SS TT UU VV WW XX YY  ZZ [[  \\  ]] ^^ __ `` aa bb cc dd ee ff  EDgg  hh ii jj )kk /ll 2 mm `nn oo pp qq rr  ss tt uuREMOVEDvv O ww xx yy zz {{ ||ANS}} CONFIGURE~~DIAL GEN LOGINMATIC\ ALLY    EMCOPYERGESUCC NOTSTARTSTART YNCVAIL  ABILITY LE           0 9 ; ? A C E E K  L M P U W Y Z b c e g l r { }                                        ERAGEm XP  H \ | }        B2TNOTFNDACKZ c g  ING A LLINK Z  UP       $ 0  R U W a b i i j                               ERR WARD NOTENC D                 !! !"" $## 0$$ 0%% 1&& 8'' =(( =)) B** P++ P,, T-- W.. X// Y00 Z11 Z22 [33 [44 ]55 k66 m77 n88 n99 o:: q;; r<< s== t>> t ?? u@@ u AA wBB xCC xDD }EE } FF ~GG ~ HH II JJ KK LL MM NN OO PP QQ  RR SS TT UU VV WW XX YY ZZ [[ \\ ]] ^^ __ `` aa bb cc dd ee ff gg  hh ii jj kk ll mm nn oo pp qq rr ss tt uu vv ww xx yy zz {{ || }} ~~                                 ACC~   L PTRLLORQSZSSIGN OCTTRIBBITMAP LKSIZEOADR CK  SSIZOOTCBUFADR LENTYPWRITE GYTECACHESELIMITRANGE CC HAIN RECK CHAR SUM  KSUM  MDREQONDEVPIESPUTYPE SPTLMSKDALRQSZ TACHK DAT ELEN YEFTRANLETE IM NS  V IR  ENTSDEV IRPVAL STMAPVBNECOFBLKNTRY SCAPEVTYPVAL XECLORABITIFFANDLE6 IDELD LEHDRNAM   E TYPE!VER RSTLINELAGORKIPL M  AT RMT UNC GETDIR JPI SDHDR EADER   "  IBLK  ERARCHY  OMBLK   URIDENT j kMAGEGHDR OFFNDEX FILENAME ITD_MFD SZOSADR7BADDRRECTORY! SD"TMCOD#PROC$  JOBID%!!NAME&""TYPE##UCHAR'$$ OM(%%POS)&&EDIT*''IGHT+((FILE,))INIT-** PUT.++KEY/,,LINE0--POS1..PAGE2//SEC300 TR411TERM522WIDTH633KEY844 955LABELQ:66TYP;77NADR88CKWSLE=99 DB>::WRIT?;; ENGTHCHANGE@<<XARGA== B>>FORMC?? D@@IBRARYAAMITABB OCALUSERLENCCGICFDD GEE HFF IGG lHH mII  PCJJJVERKKK NGLLLPINDEXMMMURTONNMAILPOOCAP#PPRGINSRQQTCHSRRCKCODTSSDFMTUTT INUUODEVVVNAMWWWPFCTXXXPGMYYYROCZZZSID[[[VER\\\ SG^]]NAMBLK$^^EFORMn__LENo`` ODENAMELENaaFORMabbOFFSETbccPCODEcdd ENdeeTDSCeffIONfggTYPghhVALhii  Qijj UTkkkBANDlllVER4GBmm Rmnn nooWNERopp SUMpqqPADqrr GErssFILAstt  DtuuTYPEuvv KvwwRAMwxx xyy yzz z{{ {|| }} SE~~ TBL| T} ~HASE KTOLCHAR RO  CNAMEMPTLEN XY TYSBARRAY CQFILEHDRNAMEUALEUEHDROTEGRANRANGE  CTEADSONCFMTFCNT  MUSERLENPLY QUESTSSIZTLENSEIPLVNWCBSBMBLK CREENWIDTHECSYSTIONLWGHTQNUMTAFFCNTHADOWKIPBORT PC ECLINDEXNAME TA CK  RTTUS RCNTLVLUCT SUBFCNVINDX0WPVBN YMATTRENTRYIGNORETABVERSDATAn oLDBL RETTAGVALEMPLATEIMEYPEUIC NDFATWSTRCTKSERDESC RDAT LENVALUE     ECTORRARRAY( SIONOL1 ACCLBLWCBPTIDTH CHANGE NDADJUSTLENOWSR SORDZEROp qONE_AVAIL CHECKSUM OUNTSIZE DIREFBLK}EISA_IDFIDNUMSEQXUPVECGSD HWID IDOFFSETNUSE KEY7LBNSIZE<INKE RLN MAPINUSEQPOFFSET]NAME_ ORDER~UMBER`ORDERjRVNSIZE   RL   TRUC_LEVEL  TYPE   VERSORDER  FREE LANCEP NDl NERRCRTERRRIERG    SWATERRSDUERRS E Z ^ r  |    !! "" ##  $$  %% && '' (( )) ** ++ D7 ,, \-- .. //NOTALLW00SYM11ING22 33SHRBEL44TCH55 #66 K77 c 88 d 99 :: ;; << ED ==ING>> ?? @@NOOPRAAPRODBBSTIPROCCWASOFFDD_ONEEBFOVFFFWRTGGLHEADERHH DNOMBREXII PPURGERRJJECAMEKKUSELL MM  NN 8 OO E PP P QQ RRR nSS |TT ~UU VV WW XX YY ZZ [[ \\ ]] ^^  __ ``OMEaa bb EN cc dd  ee ff gg  hh ii jj  kk  ll  mm nn oo pp  qq  rr ss tt uu vv !ww #xx #yy $zz ${{ ' || + }} - ~~ . /  / 1 4 5  5  6  9 ;ort.YPYBEEN>Y >Y ?Y AY D Y DY GY H Y I Y Q Y S  Y T Y V Y ZY [Y [Y \Y ^Y _Y aY aY bY bY cY cY e Y fY f Y gY pY r Y r!!Y s""Y w##Y x$$Y z%%Y {&&Y ''Y  ((Y  ))Y **Y  ++Y  ,,Y  --Y ..Y //Y 00Y 11Y  22Y 33Y 44Y 55Y  66Y  77Y 88Y  99Y ::Y ;;Y <<Y ==Y  >>Y ??Y  @@Y AAY BBY CCY DDY EEY FFY GGY HHY IIY JJY KKY LLY MMY NNY OOY DSBwJJMOVExKKNEWyLLINGwMM xNN yOO zPPNOTDISKzQQ OPENFAIL{RR ESS TT  UU VV WW XX YY "ZZ &[[ *\\ 2 ]] : ^^ ;__ ?`` Kaa Obb P cc Pdd Ree Uff Vgg Xhh ` ii `jj `kk xll zmm ~nn oo pp qq rr ss tt uu vv  ww xx yy zz {{ ||  }} ~~                     A   # $ ; N V  V Y o {                       NSTERR| GLISHOME} TY }   MISMATCH~REQTOOLONG UMENT            , 5 6 > A B D D ` e g h i {                                          SB D J K L M N O `  m  r                  _GTR_32_BITS5 ITHMETIC                                  RAY  (     TRES SCEFCFERNDINGV II       !!  ""  ##TOOLONG$$ %% GNMNTSYN&& '' N(( )) **CNTINV++SETUP,,SEMBLY--RTERR..ION//IGNX00 {11 }22 33 44 55 66CHAN77 ED88 99 ::: F;; <<  ==  >> ??FAIL@@  ED{AAINGNBB oCC pDD EE FFMENT GG (HH =II ~JJ KK LL MM NN OO ST{PPANCE^QQOCIATEDRR SS ,TT hUU jVV WW XX YY ZZ [[ \\ ]] ^^ __ ING``  ONaa bbUMED,cc Tdd ee & ff igg lhh ii jj  kk ll CTXNOTFNDmmDEL`nnFLToo LM_ppTOOLOW_qqRPDFERrrUSPECTss YNCACTIVEttHRONOUS}uu vv ww xx yyWRTERzzTLINE{{OMIC || PC}}ROCLINE~~ RTACH  O Q R    ED  MENT( B C E  SXCONSTOEMPT    9  A  V  Z p t                        ED   & ' ,  ? @ D O U V l y           ING + W q }         Sk  NTIONd eFAILREQREFIBUTE     < E U           S     # J P X [ \ b  z { }            MBXUSETWO WUDIT    = Z ] |                 FAILED|ING #  P c   SRVRUNTHDOWNF ENTICATED     ING  ON      C!! F"" G## O$$ R%% && '' (( )) ** ++ ,, -- .. // 00 11 22 33 44 55  OR"66 77FAIL88 URE99GEN::MATCH;;ISM<< NOTSAVED==ORITY>> ??ZATION@@ AA $BB &CC ' DD (EE + FF 4GG 5 HH ;II <JJ C KK DLL IMM [NN [OO \ PP gQQ RR  SS TT UU VV WW XX YY  ZZ [[  \\  ]] ^^ __ `` aa bb cc dd ee ff  EDgg  hh ii jj )kk /ll 2 mm `nn oo pp qq rr  ss tt uuREMOVEDvv O ww xx yy zz {{ ||ANS}} CONFIGURE~~DIAL GEN LOGINMATIC\ ALLY    EMCOPYERGESUCC NOTSTARTSTART YNCVAIL  ABILITY LE           0 9 ; ? A C E E K  L M P U W Y Z b c e g l r { }                                        ERAGEm XP  H \ | }        B2TNOTFNDACKZ c g  ING A LLINK Z  UP       $ 0  R U W a b i i j                               ERR WARD NOTENC D                 !! !"" $## 0$$ 0%% 1&& 8'' =(( =)) B** P++ P,, T-- W.. X// Y00 Z11 Z22 [33 [44 ]55 k66 m77 n88 n99 o:: q;; r<< s== t>> t ?? u@@ u AA wBB xCC xDD }EE } FF ~GG ~ HH II JJ KK LL MM NN OO PP QQ  RR SS TT UU VV WW XX YY ZZ [[ \\ ]] ^^ __ `` aa bb cc dd ee ff gg  hh ii jj kk ll mm nn oo pp qq rr ss tt uu vv ww xx yy zz {{ || }} ~~                                 ACC~   L PTRLLORQSZSSIGN OCTTRIBBITMAP LKSIZEOADR CK  SSIZOOTCBUFADR LENTYPWRITE GYTECACHESELIMITRANGE CC HAIN RECK CHAR SUM  KSUM  MDREQONDEVPIESPUTYPE SPTLMSKDALRQSZ TACHK DAT ELEN YEFTRANLETE IM NS  V IR  ENTSDEV IRPVAL STMAPVBNECOFBLKNTRY SCAPEVTYPVAL XECLORABITIFFANDLE6 IDELD LEHDRNAM   E TYPE!VER RSTLINELAGORKIPL M  AT RMT UNC GETDIR JPI SDHDR EADER   "  IBLK  ERARCHY  OMBLK   URIDENT j kMAGEGHDR OFFNDEX FILENAME ITD_MFD SZOSADR7BADDRRECTORY! SD"TMCOD#PROC$  JOBID%!!NAME&""TYPE##UCHAR'$$ OM(%%POS)&&EDIT*''IGHT+((FILE,))INIT-** PUT.++KEY/,,LINE0--POS1..PAGE2//SEC300 TR411TERM522WIDTH633KEY844 955LABELQ:66TYP;77NADR88CKWSLE=99 DB>::WRIT?;; ENGTHCHANGE@<<XARGA== B>>FORMC?? D@@IBRARYAAMITABB OCALUSERLENCCGICFDD GEE HFF IGG lHH mII  PCJJJVERKKK NGLLLPINDEXMMMURTONNMAILPOOCAP#PPRGINSRQQTCHSRRCKCODTSSDFMTUTT INUUODEVVVNAMWWWPFCTXXXPGMYYYROCZZZSID[[[VER\\\ SG^]]NAMBLK$^^EFORMn__LENo`` ODENAMELENaaFORMabbOFFSETbccPCODEcdd ENdeeTDSCeffIONfggTYPghhVALhii  Qijj UTkkkBANDlllVER4GBmm Rmnn nooWNERopp SUMpqqPADqrr GErssFILAstt  DtuuTYPEuvv KvwwRAMwxx xyy yzz z{{ {|| }} SE~~ TBL| T} ~HASE KTOLCHAR RO  CNAMEMPTLEN XY TYSBARRAY CQFILEHDRNAMEUALEUEHDROTEGRANRANGE  CTEADSONCFMTFCNT  MUSERLENPLY QUESTSSIZTLENSEIPLVNWCBSBMBLK CREENWIDTHECSYSTIONLWGHTQNUMTAFFCNTHADOWKIPBORT PC ECLINDEXNAME TA CK  RTTUS RCNTLVLUCT SUBFCNVINDX0WPVBN YMATTRENTRYIGNORETABVERSDATAn oLDBL RETTAGVALEMPLATEIMEYPEUIC NDFATWSTRCTKSERDESC RDAT LENVALUE     ECTORRARRAY( SIONOL1 ACCLBLWCBPTIDTH CHANGE NDADJUSTLENOWSR SORDZEROp qONE_AVAIL CHECKSUM OUNTSIZE DIREFBLK}EISA_IDFIDNUMSEQXUPVECGSD HWID IDOFFSETNUSE KEY7LBNSIZE<INKE RLN MAPINUSEQPOFFSET]NAME_ ORDER~UMBER`ORDERjRVNSIZE   RL   TRUC_LEVEL  TYPE   VERSORDER  FREE LANCEP NDl NERRCRTERRRIERG    SWATERRSDUERRS E Z ^ r  |    !! "" ##  $$  %% && '' (( )) ** ++ D7 ,, \-- .. //NOTALLW00SYM11ING22 33SHRBEL44TCH55 #66 K77 c 88 d 99 :: ;; << ED ==ING>> ?? @@NOOPRAAPRODBBSTIPROCCWASOFFDD_ONEEBFOVFFFWRTGGLHEADERHH DNOMBREXII PPURGERRJJECAMEKKUSELL MM  NN 8 OO E PP P QQ RRR nSS |TT ~UU VV WW XX YY ZZ [[ \\ ]] ^^  __ ``OMEaa bb EN cc dd  ee ff gg  hh ii jj  kk  ll  mm nn oo pp  qq  rr ss tt uu vv !ww #xx #yy $zz ${{ ' || + }} - ~~ . /  / 1 4 5  5  6  9 ;ort.}BEFORE- > G H X                     GIN/   DNING  " J y         !! "" ## $$ T%% _PRIVATEZ&&NLEND''OFBUF((FILE))RAN** UNe++ ,,HIND--ING.. // !00 $11 :22 <33 =44 I 55 ^66 d77 i 88 k99 l:: s;; u << == >> ??  @@  AA BB CC  DD EELONGING1FF WqGG HH II JJ RKK SLLTWEENMM  NN OO PP QQ RR SS TT UU VVYONDWW XXICSRYY GvZZ [[ \\ ]] IC^^JDEVFID__NLDIS``NARYaa bb cc ddOPEReeCHKSUMff Dgg hh iiFAILjj  SkkINGTll cmm  nn ooRECFMTpp Oqq STrr Tss tt uu %vv +ww 5xx [yy a zz l{{ }|| }} ~~            MAP  4 8 9 ? P S [ \ _ ` c d e w                ERR8  INVREADERR SV S  R  S  z |      KS ZLANKTAPEK0BADDIRSYNX EXPNABS SNRLSDZERO  NOCK                                     $ % & 0 1 3 8 : ; < @ B C C D E E  L  R S S Z [ ^ _ a b g  h  m m n o q  q  t t  u  v w   w   x   x   z   | ~                        !! "" ## $$ %% && '' (( )) ** ++ ,, -- .. // 00 11 22 33 44 55 66 77 88 99  :: ;;  << == >> ?? @@ AA BB CC DD EE FF GG HH II  JJ KK  LL MM NN OO PP QQCHECKRR  0SSNTERRTT RC UU EDVV vWWLOST XX SYY ZZ [[  \\  ]] , ^^ 1__ 7`` Maa Nbb Occ Udd Uee i ff k gg qhh x ii zjj {kk ll mm nn oo pp qq rr ss tt uu vv  ww WNZ xx MS yy NDSYMVECzzOARD{{ || DYS}} T~~ W X F GUSCOL OLEAN +  T              ! & & ) 8 : : ; D J  d k o             ABLE  ; EDA  FILE . REJECTSTRAP/ _REJECTED T H# n       LINETRUNCTOM UND8 ARIES YD     EDFINUSE Sy  _PROCEDURERACKETS  NCH      ! g h      BET DESTRANGMSGLOSTEAK   3 4 5 ERR IN      POINT    _APPL3RCH4SYS5INTOCALKNLIB N DIRLOCgTRGLOCh OADCAST   KEN <TOOFARUCKET    u         FBLKREQYTALI  FER                        ! ! " # $ % & ' ( (  ) 4  7   9!! >"" B## D$$ E%% N && T'' U(( V)) W** W++ X,, Y-- [.. a// i00 o11 p22 r 33 t44 t55 y66 z77 z88 }99 ::  ;;  << == >> ?? @@ AA  BB CC DD EE FF GG HH II JJ KK LL MM NN OO PP QQ RR SS TT UU VV WW XX  YY ZZ [[ \\ ]] ^^ __ `` aa bb cc dd ee  ff gg hh ED' ii  jj kk llINGmmOVF nn  oo !pp !qq rr S!ss "tt (uu Fvv Pww Wxx Zyy [zz j {{ q|| }} ~~LOST"_COUNT#QUAL# NOTALIGN$OVF% L& R' TOOSMALL" ( G  ) ~ CHECK  * + , KTEXT2 Xs_DAP- DI. RURECERR1 _ABORT_FAIL/ COMMIT_FAIL0ILD( w   ER    T     '  3 4 H  R W      ININV3 OBSOLETE4 S$ % @  V W t u          Y   5 6 G w      T   # 2 7 K T {                        VN7 P8 9YPASSTALSTK: E )  : V t }  ~        S "  E  O  z  {  |            LM   CABINETm   |  LES;   <  CHE      " - 6 b      ING  \  LS= F    INVGROUP>!!NEITHER?""OTCLU@## OLDGROUPA$$PASSB%%PASSLENC&&REBOOTD'' LCULATED(( )) L**  ++  ,, -- .. // 00 11  22 &33 3 44 455 666 C77 E88 N99 ^:: `;; k<< {== >>  ?? @@  AA BB CC DD  EEABLEeFF gGG hHH iII  JJ  KK LLBACKMM NN OO PP QQ RR ERRSS ED TT ' UU ( VV ) WW = XX @YY rZZ [[ \\ ]] R`^^ k__ `` aa bb S ccING`dd ee  ff Sgg UNDEFSYM6hhSERFAILEii_ENTRY jj kkUSERll Emm N nn oo #pp ) qq 2 rr <ss =tt Puu Tvv Uww Vxx Wyy Wzz a{{ g || g}} g~~ h h k  k l q t u y  } }                    CEL*  F G  EDA F H I J f p v      ING!LED  G q QUITJ_WIP MDNOT                           # % % % & & & ' ( ) ) * * + , , - - / 0 1 1 3 3 5 5  7  7 7 8 8  8 9 9  9 9 ; = = ? C C  D E E  G I I  I K K K L M M N N P Q R S V X   X   Y   Y   \   \ ] _ ` a c f g g g h i i  m m m n p q   r!! t"" t ## u $$ u%% v&& v'' x (( y)) ** ++ ,, -- .. // 00 11  22  33 44 55 66 77 88 99 :: ;; << == >> ?? @@  AA BB CC DD EE FF GG HH II JJ KK LL MM  NN OO  PP QQ RR SS TT UU VV WW XX YY ZZ [[ \\ ]] ^^ __ `` aa bb cc dd ee ff  gg hh ii jj kk ll mm nn oo pp qq rr ss tt uu vv ww xx yy zz {{ || }}  ~~           DMTLUNSELMVAL TALLMEM%SSIGNNTTACHOBALPCONVCSPYSTRQRETMP&WIN'DISPRT(EDTIT)XPREGRLOCKSMACT UOPEN9 INFILE OUTFILENTMP*PARCASVOLLWRDINPF+TMPF,ESFPXSTKYUNACPZSPAWN[WRITMP- PABILITIES;   Y {  CITY  ?TINQ\ T] VE" [ \ ] ^ _ ` a bSPAWNb RD    RIAGE_CONTROL ER'TRIDGEI SEV o     _BLIND  R   1TEGORY     USE D  L     SoBHUNGl INDISABLEcVALIDLOCKMAPTOOBIG SNOTSUPTDd e Tf CBT C Fg Rh DAi D\ ROM_HSjISOk SA T EASED<  BlREFNEGlHCVTFND MmFGEVENT HAIN EDn  Wn No x  GE   @ H K i j p p p q t t u  {                       D       , < > ? A B [   d!! i"" k## n$$ %% && '' (( ))  ** ++ ,, -- S.. //_INVp00ING 11INTLKr22NEL)33 :44 F55 H66 N77 o88 p99 r:: {;; |<< }== }>> ?? @@ AA BB CC DD EE FF GG  HH II JJ KK LL MM NN OO PP QQ RR SS TT UU VV WW XX YY ZZ [[ \\ ]] ^^ __ `` aa  bb cc dd ee ff gg hh ii jj kk ll mm nn oo pp qq rr ss tt uu vv wwCNTWxx Syy zz {{ ||  }} ~~VIO:RACTER   ' ' ( ) , - - . / 0 H Q d n                         ISTIC* + , B s  t   S D  E  F   S  %  & &  . 3  A U j n  s y | } ~     ;ort. CHARACTERS                             NING  " J y         !! "" ## $$ T%% _PRIVATEZ&&NLEND''OFBUF((FILE))RAN** UNe++ ,,HIND--ING.. // !00 $11 :22 <33 =44 I 55 ^66 d77 i 88 k99 l:: s;; u << == >> ??  @@  AA BB CC  DD EELONGING1FF WqGG HH II JJ RKK SLLTWEENMM  NN OO PP QQ RR SS TT UU VVYONDWW XXICSRYY GvZZ [[ \\ ]] IC^^JDEVFID__NLDIS``NARYaa bb cc ddOPEReeCHKSUMff Dgg hh iiFAILjj  SkkINGTll cmm  nn ooRECFMTpp Oqq STrr Tss tt uu %vv +ww 5xx [yy a zz l{{ }|| }} ~~            MAP  4 8 9 ? P S [ \ _ ` c d e w                ERR8  INVREADERR SV S  R  S  z |      KS ZLANKTAPEK0BADDIRSYNX EXPNABS SNRLSDZERO  NOCK                                     $ % & 0 1 3 8 : ; < @ B C C D E E  L  R S S Z [ ^ _ a b g  h  m m n o q  q  t t  u  v w   w   x   x   z   | ~                        !! "" ## $$ %% && '' (( )) ** ++ ,, -- .. // 00 11 22 33 44 55 66 77 88 99  :: ;;  << == >> ?? @@ AA BB CC DD EE FF GG HH II  JJ KK  LL MM NN OO PP QQCHECKRR  0SSNTERRTT RC UU EDVV vWWLOST XX SYY ZZ [[  \\  ]] , ^^ 1__ 7`` Maa Nbb Occ Udd Uee i ff k gg qhh x ii zjj {kk ll mm nn oo pp qq rr ss tt uu vv  ww WNZ xx MS yy NDSYMVECzzOARD{{ || DYS}} T~~ W X F GUSCOL OLEAN +  T              ! & & ) 8 : : ; D J  d k o             ABLE  ; EDA  FILE . REJECTSTRAP/ _REJECTED T H# n       LINETRUNCTOM UND8 ARIES YD     EDFINUSE Sy  _PROCEDURERACKETS  NCH      ! g h      BET DESTRANGMSGLOSTEAK   3 4 5 ERR IN      POINT    _APPL3RCH4SYS5INTOCALKNLIB N DIRLOCgTRGLOCh OADCAST   KEN <TOOFARUCKET    u         FBLKREQYTALI  FER                        ! ! " # $ % & ' ( (  ) 4  7   9!! >"" B## D$$ E%% N && T'' U(( V)) W** W++ X,, Y-- [.. a// i00 o11 p22 r 33 t44 t55 y66 z77 z88 }99 ::  ;;  << == >> ?? @@ AA  BB CC DD EE FF GG HH II JJ KK LL MM NN OO PP QQ RR SS TT UU VV WW XX  YY ZZ [[ \\ ]] ^^ __ `` aa bb cc dd ee  ff gg hh ED' ii  jj kk llINGmmOVF nn  oo !pp !qq rr S!ss "tt (uu Fvv Pww Wxx Zyy [zz j {{ q|| }} ~~LOST"_COUNT#QUAL# NOTALIGN$OVF% L& R' TOOSMALL" ( G  ) ~ CHECK  * + , KTEXT2 Xs_DAP- DI. RURECERR1 _ABORT_FAIL/ COMMIT_FAIL0ILD( w   ER    T     '  3 4 H  R W      ININV3 OBSOLETE4 S$ % @  V W t u          Y   5 6 G w      T   # 2 7 K T {                        VN7 P8 9YPASSTALSTK: E )  : V t }  ~        S "  E  O  z  {  |            LM   CABINETm   |  LES;   <  CHE      " - 6 b      ING  \  LS= F    INVGROUP>!!NEITHER?""OTCLU@## OLDGROUPA$$PASSB%%PASSLENC&&REBOOTD'' LCULATED(( )) L**  ++  ,, -- .. // 00 11  22 &33 3 44 455 666 C77 E88 N99 ^:: `;; k<< {== >>  ?? @@  AA BB CC DD  EEABLEeFF gGG hHH iII  JJ  KK LLBACKMM NN OO PP QQ RR ERRSS ED TT ' UU ( VV ) WW = XX @YY rZZ [[ \\ ]] R`^^ k__ `` aa bb S ccING`dd ee  ff Sgg UNDEFSYM6hhSERFAILEii_ENTRY jj kkUSERll Emm N nn oo #pp ) qq 2 rr <ss =tt Puu Tvv Uww Vxx Wyy Wzz a{{ g || g}} g~~ h h k  k l q t u y  } }                    CEL*  F G  EDA F H I J f p v      ING!LED  G q QUITJ_WIP MDNOT                           # % % % & & & ' ( ) ) * * + , , - - / 0 1 1 3 3 5 5  7  7 7 8 8  8 9 9  9 9 ; = = ? C C  D E E  G I I  I K K K L M M N N P Q R S V X   X   Y   Y   \   \ ] _ ` a c f g g g h i i  m m m n p q   r!! t"" t ## u $$ u%% v&& v'' x (( y)) ** ++ ,, -- .. // 00 11  22  33 44 55 66 77 88 99 :: ;; << == >> ?? @@  AA BB CC DD EE FF GG HH II JJ KK LL MM  NN OO  PP QQ RR SS TT UU VV WW XX YY ZZ [[ \\ ]] ^^ __ `` aa bb cc dd ee ff  gg hh ii jj kk ll mm nn oo pp qq rr ss tt uu vv ww xx yy zz {{ || }}  ~~           DMTLUNSELMVAL TALLMEM%SSIGNNTTACHOBALPCONVCSPYSTRQRETMP&WIN'DISPRT(EDTIT)XPREGRLOCKSMACT UOPEN9 INFILE OUTFILENTMP*PARCASVOLLWRDINPF+TMPF,ESFPXSTKYUNACPZSPAWN[WRITMP- PABILITIES;   Y {  CITY  ?TINQ\ T] VE" [ \ ] ^ _ ` a bSPAWNb RD    RIAGE_CONTROL ER'TRIDGEI SEV o     _BLIND  R   1TEGORY     USE D  L     SoBHUNGl INDISABLEcVALIDLOCKMAPTOOBIG SNOTSUPTDd e Tf CBT C Fg Rh DAi D\ ROM_HSjISOk SA T EASED<  BlREFNEGlHCVTFND MmFGEVENT HAIN EDn  Wn No x  GE   @ H K i j p p p q t t u  {                       D       , < > ? A B [   d!! i"" k## n$$ %% && '' (( ))  ** ++ ,, -- S.. //_INVp00ING 11INTLKr22NEL)33 :44 F55 H66 N77 o88 p99 r:: {;; |<< }== }>> ?? @@ AA BB CC DD EE FF GG  HH II JJ KK LL MM NN OO PP QQ RR SS TT UU VV WW XX YY ZZ [[ \\ ]] ^^ __ `` aa  bb cc dd ee ff gg hh ii jj kk ll mm nn oo pp qq rr ss tt uu vv wwCNTWxx Syy zz {{ ||  }} ~~VIO:RACTER   ' ' ( ) , - - . / 0 H Q d n                         ISTIC* + , B s  t   S D  E  F   S  %  & &  . 3  A U j n  s y | } ~     ;ort.}UCHECK               $  '  ' ( * / 4  @ F G G H  I L T T U [  ] e m  s!! s"" u## |$$ | %%  && '' (( )) ** ++ ,, -- .. //  00 11 22 33 44 55 66 77  88 99 :: ;; << == >> ?? EDv@@ yAAINGBB )CCPOINT DD  EE ST FF UM;GG AHH mII JJ KK LL MM NN OO PP QQ RR SSUSEsTT GtUU DATSTRUC-VVILDRENWW KuXXABSADRvYYLTHOMEwZZDOM[[PRIHOMEx\\RELADRy]]SCBz^^ M|__ EXECUTIVE ``KERNEL aaONIS{bbVEC|cc N}ddOICEeeOSEfff ggg uhh IADBEMPTYii SHUTDOWNjj TARTINGUPkk TERMINATEDllBLIMmmPORTnnRCUIToo Opp Rqq o rr ss tt uu vv ww xx yy S zz {{LARo|| }} JL~~LAIMSSDISAB H MISS NP S  "  $  % +  , 3 4 6 7 ; = ? ? I  h v v |                             ES     UNKUSE                        S D EANINGm  UP RING  HOUSE " I S# * RK  I   - 5            ENT     # e {       CLOSE NOTIFY RRFAILRCEXT MISMATCHPBOARD    FAIL LOCKED NODATA ZEROROTSYMTBLTABLESBLFAILPROTWARNMSGOCKO SE  [ g        CLIENT   D          ( ( [  t           EL ICERR    !! ""FAIL[##OREIGN$$ IN%% && ''OUTr(( s)) ** ++ ,, --SERVER..ING&// ,00 I11 O22 r33 s44 55 66 77 88 99 :: ;; << == >> ?? @@ AA BB CC DD EEREFCFERFFSTBLERRGGUBASIGNHHELBASIIEXITJJGDIFFKKLISTLLNOSDATAMMPDIFFNNSCOMMOOTERPP  QQ RR SS 8TT <UU <VV @WW DXX FYY JZZ N [[ Q\\ R]] V^^ W __ Y`` i aa n bb q cc u dd ee ff gg  hh ii jj kk ll mm nn oo pp qq rr ss tt uu vv ww xx yy zz {{  ||  }} ~~       S\WIDE  N MDERRORINPUTLIN NOTALLINPIP EXFND P0VLDOBS PROCSYNTAX"  TOOLONG  EXEC#KRNL$ % X ` ODSUPRUSERPOUTF11 NF   0  LTQUALSOVRQUAVAL N STRLm  YSOBSVERRRTINGXMGRERR OB D E             ! # $ % ' ) ) *  - . . 1 3 4 5 6 6 8 9 > A  C  I J  R T Z [  \  ^  _  a  a a b b  b c c c  d  e  e  e f  g  i l m p q r s t t v v v w y  z | } ~ ~                                                      !! "" ## $$ %% && '' (( ))  ** ++ ,, -- .. //  00 11 22 33 44 55 66 77 88 99 :: ;; << == >> ?? @@  AA BB CC  DD EE  FF GGGENWARNHHINGII FJJ IKKLLATE LLING[MMECT NN OO EDYPP QQIONRR SS TT  S UU ORVV WW XX YY ZZ [[ RR\\SHTY]] OR=^^UMN<__ SL`` aa bb M#cc dd ee ffBCLUggINATION hh ii %jj 4kk Z ll mm nn oo pp Eqq D&rr *ssCODttDAT%uuFAILvv ILwwEMTYxx Myy zz A*{{ m|| u}} v~~   ND                    ! ! " " # % & ' ' ' ( )  + . / 1 1  1 2 3 4 7 8 9 9 9 : ; H J T U V  Z Z [ \ ]  _ ` ` a b b d f k l n q r s u  v x  y y ~                                                                                                                 !! "" ##  $$  %%  && '' ((  )) ** S)++ 6,, S-- o.. // 00 11 22 33_REPEAT44 S 55ENTY66 77RROR88HARD99 IT0:: ;;TING << ON==  >> (?? T@@ UAA XBB qCC DD EE FFSYNCGGUNICATE)HH II INGSJJ uKK LL  ONxMM NN SOO PP QQ RR TYSS TT UU VV_FAILWWSTATE_COMPLETEXXOREXEYYPALGNOTUZZ Qs [[ w\\  ]]  ^^  __  `` REaa DbbISONcc TddIBILITYee ff  LEgg `hh iiERRijjILATION kk ?ll @mm @nn Aoo pp  qq rr ss tt  uu vv ww  xx  yy  zz E{{ DR|| }}FAIL~~ R* F n x ~      NCONERRfIERRgTERRhLETE         4 6 [ _                  D      !  "  #  $  %  &  ( 0 6 8 V W  ] a n                  LY " $ ( P  f      ION  , -     XK  \   IANCECATED5 9 X YNFAILMAPFULLt uONENT* > > ? @ G g h k l           UND>RESS    ED3 ; S X Y f  INGi  ONF S U f g h i t u SUMMARYYUTEDp  WARN@ERR NABORT   PPLICATION  TMPT  CAT  ENATE    D     IONEALEDDCAFT INITION    ( ) *  .  /  B Q S T   T!! V"" W## b$$ e%% f&& g'' n(( t)) u** v++ w,, ~-- .. // 00 11 22  33 44  55 66 77 88 99 :: ;; << ==  AL>> M?? @@ AA  BB CC  LYsDDNAFTEE INFFVAFTGG INHHZAFTII INJJERRKKFAILLLLGNFMMBASADRNNCONOODEFREQPP LQQ ISRRFACSSIGERRTTURATION UU 8VV 9WW JXX LYY ] ZZ {[[ \\ ]] ^^ __ `` aa  bb  Ecc  DXdd ee ff INGgg RM hh iiINPUTjjXMEMkkLICT ll %mm <nn =oo Npp qq rr ss tt ING uu  vv  ww  xx  yy  zz {{  || !}} ' ~~ X Z [             S  ! * E  NFOMEMNEGOCONDISNNEGPARM QUAL OPTION  UTPUTS PARM SCUSEDXQUAL          2 VAL ROUTIMG INIERRLENERROST  NDELETEONLY ECFAIL  T   + - h             ED  / ING      % R   ON             ) _ d                       S & P    QUEUED  SA TERM RR   OTINIPOIINISCATT  EREMOS SEGATTQERR ISTENCY  % & + 4  @ T  s     T#OLE  ' ,  TANT                    ERROR  INVECTABRAINT   S _ERROR  TOOLARGE UCTNUMPTION<TACT   - O  e o s  s  w      !!  "" ##  $$ %%  && '' ((SYSMGR)) IN**  ++ ,, (-- ).. /// < 00 A 11 Y22 \33 z44 55 66 77 88  99 :: ;; << ED==INGC>> ~?? @@ AA BB SCC DD  EE FF  GG $HH 1II 7JJ FKK GLL IMM RNN WOO XPP gQQ hRR kSS l TT lUU n VV ~WW XX  YY ZZ [[  \\ ]] ^^  __  ``  aa  bb cc dd eeENT)ff 0gg :hh ;ii <jj =kk Fll Umm nn S oo  pp +qq b rr ss  tt uu vv XTww xx yy  zz {{ || }} * ~~ * - 1 6 7 : ; ?  C D K  V W X Y m r  u                IGUOUS   . f          LYf  MEOUT NUATION    - A       E UU CONTINUE U gU U U  U U          $  '  ' ( * / 4  @ F G G H  I L T T U [  ] e m  s!! s"" u## |$$ | %%  && '' (( )) ** ++ ,, -- .. //  00 11 22 33 44 55 66 77  88 99 :: ;; << == >> ?? EDv@@ yAAINGBB )CCPOINT DD  EE ST FF UM;GG AHH mII JJ KK LL MM NN OO PP QQ RR SSUSEsTT GtUU DATSTRUC-VVILDRENWW KuXXABSADRvYYLTHOMEwZZDOM[[PRIHOMEx\\RELADRy]]SCBz^^ M|__ EXECUTIVE ``KERNEL aaONIS{bbVEC|cc N}ddOICEeeOSEfff ggg uhh IADBEMPTYii SHUTDOWNjj TARTINGUPkk TERMINATEDllBLIMmmPORTnnRCUIToo Opp Rqq o rr ss tt uu vv ww xx yy S zz {{LARo|| }} JL~~LAIMSSDISAB H MISS NP S  "  $  % +  , 3 4 6 7 ; = ? ? I  h v v |                             ES     UNKUSE                        S D EANINGm  UP RING  HOUSE " I S# * RK  I   - 5            ENT     # e {       CLOSE NOTIFY RRFAILRCEXT MISMATCHPBOARD    FAIL LOCKED NODATA ZEROROTSYMTBLTABLESBLFAILPROTWARNMSGOCKO SE  [ g        CLIENT   D          ( ( [  t           EL ICERR    !! ""FAIL[##OREIGN$$ IN%% && ''OUTr(( s)) ** ++ ,, --SERVER..ING&// ,00 I11 O22 r33 s44 55 66 77 88 99 :: ;; << == >> ?? @@ AA BB CC DD EEREFCFERFFSTBLERRGGUBASIGNHHELBASIIEXITJJGDIFFKKLISTLLNOSDATAMMPDIFFNNSCOMMOOTERPP  QQ RR SS 8TT <UU <VV @WW DXX FYY JZZ N [[ Q\\ R]] V^^ W __ Y`` i aa n bb q cc u dd ee ff gg  hh ii jj kk ll mm nn oo pp qq rr ss tt uu vv ww xx yy zz {{  ||  }} ~~       S\WIDE  N MDERRORINPUTLIN NOTALLINPIP EXFND P0VLDOBS PROCSYNTAX"  TOOLONG  EXEC#KRNL$ % X ` ODSUPRUSERPOUTF11 NF   0  LTQUALSOVRQUAVAL N STRLm  YSOBSVERRRTINGXMGRERR OB D E             ! # $ % ' ) ) *  - . . 1 3 4 5 6 6 8 9 > A  C  I J  R T Z [  \  ^  _  a  a a b b  b c c c  d  e  e  e f  g  i l m p q r s t t v v v w y  z | } ~ ~                                                      !! "" ## $$ %% && '' (( ))  ** ++ ,, -- .. //  00 11 22 33 44 55 66 77 88 99 :: ;; << == >> ?? @@  AA BB CC  DD EE  FF GGGENWARNHHINGII FJJ IKKLLATE LLING[MMECT NN OO EDYPP QQIONRR SS TT  S UU ORVV WW XX YY ZZ [[ RR\\SHTY]] OR=^^UMN<__ SL`` aa bb M#cc dd ee ffBCLUggINATION hh ii %jj 4kk Z ll mm nn oo pp Eqq D&rr *ssCODttDAT%uuFAILvv ILwwEMTYxx Myy zz A*{{ m|| u}} v~~   ND                    ! ! " " # % & ' ' ' ( )  + . / 1 1  1 2 3 4 7 8 9 9 9 : ; H J T U V  Z Z [ \ ]  _ ` ` a b b d f k l n q r s u  v x  y y ~                                                                                                                 !! "" ##  $$  %%  && '' ((  )) ** S)++ 6,, S-- o.. // 00 11 22 33_REPEAT44 S 55ENTY66 77RROR88HARD99 IT0:: ;;TING << ON==  >> (?? T@@ UAA XBB qCC DD EE FFSYNCGGUNICATE)HH II INGSJJ uKK LL  ONxMM NN SOO PP QQ RR TYSS TT UU VV_FAILWWSTATE_COMPLETEXXOREXEYYPALGNOTUZZ Qs [[ w\\  ]]  ^^  __  `` REaa DbbISONcc TddIBILITYee ff  LEgg `hh iiERRijjILATION kk ?ll @mm @nn Aoo pp  qq rr ss tt  uu vv ww  xx  yy  zz E{{ DR|| }}FAIL~~ R* F n x ~      NCONERRfIERRgTERRhLETE         4 6 [ _                  D      !  "  #  $  %  &  ( 0 6 8 V W  ] a n                  LY " $ ( P  f      ION  , -     XK  \   IANCECATED5 9 X YNFAILMAPFULLt uONENT* > > ? @ G g h k l           UND>RESS    ED3 ; S X Y f  INGi  ONF S U f g h i t u SUMMARYYUTEDp  WARN@ERR NABORT   PPLICATION  TMPT  CAT  ENATE    D     IONEALEDDCAFT INITION    ( ) *  .  /  B Q S T   T!! V"" W## b$$ e%% f&& g'' n(( t)) u** v++ w,, ~-- .. // 00 11 22  33 44  55 66 77 88 99 :: ;; << ==  AL>> M?? @@ AA  BB CC  LYsDDNAFTEE INFFVAFTGG INHHZAFTII INJJERRKKFAILLLLGNFMMBASADRNNCONOODEFREQPP LQQ ISRRFACSSIGERRTTURATION UU 8VV 9WW JXX LYY ] ZZ {[[ \\ ]] ^^ __ `` aa  bb  Ecc  DXdd ee ff INGgg RM hh iiINPUTjjXMEMkkLICT ll %mm <nn =oo Npp qq rr ss tt ING uu  vv  ww  xx  yy  zz {{  || !}} ' ~~ X Z [             S  ! * E  NFOMEMNEGOCONDISNNEGPARM QUAL OPTION  UTPUTS PARM SCUSEDXQUAL          2 VAL ROUTIMG INIERRLENERROST  NDELETEONLY ECFAIL  T   + - h             ED  / ING      % R   ON             ) _ d                       S & P    QUEUED  SA TERM RR   OTINIPOIINISCATT  EREMOS SEGATTQERR ISTENCY  % & + 4  @ T  s     T#OLE  ' ,  TANT                    ERROR  INVECTABRAINT   S _ERROR  TOOLARGE UCTNUMPTION<TACT   - O  e o s  s  w      !!  "" ##  $$ %%  && '' ((SYSMGR)) IN**  ++ ,, (-- ).. /// < 00 A 11 Y22 \33 z44 55 66 77 88  99 :: ;; << ED==INGC>> ~?? @@ AA BB SCC DD  EE FF  GG $HH 1II 7JJ FKK GLL IMM RNN WOO XPP gQQ hRR kSS l TT lUU n VV ~WW XX  YY ZZ [[  \\ ]] ^^  __  ``  aa  bb cc dd eeENT)ff 0gg :hh ;ii <jj =kk Fll Umm nn S oo  pp +qq b rr ss  tt uu vv XTww xx yy  zz {{ || }} * ~~ * - 1 6 7 : ; ?  C D K  V W X Y m r  u                IGUOUS   . f          LYf  MEOUT NUATION    - A       E } CONTINUED  (  SING  ? A X [  \  r         LINE RACT DEF ICTORY   Sm IBUTED) 3  ION OL        !! + "" :## ;$$ ;%% <&& ='' F (( S)) U** a++ g ,, j-- n .. n// u00 z11 22 33 44 55 66 77  88  99  ::  ;; << == >> ?? @@ AA BB CC DD C EE  FF ! GG " HHLER II  JJ <KK [LL p MM uNN vOO  PP QQ  RR SS TT  UU VV WW  XX YY ZZ O# [[ $ \\ SZ]] Y ^^ % __ & `` _Y(aa YP' bb _DISALLOWEDccLOSTdd NOT_VALIDeeSTALEff WITH_HINTgg V$PASS_FILE4hh OPTIONS5ii ERSATIONAL/jjION kk ll ( mm 3nn Eoo bpp cqq hrr iss tt uu vv  ww xx yy zz {{ || }}  ~~ T v  x       ED D G r        R\ f  ING  _  w     _STALL(  UCCESS O) PIED " & ' *  * +  ,  -  .  2 F f o     B,  R-  SMSG.  Y # % % - /  3 4 6 7  7 8 9 : ;  E F G H Q U V a b b i p             FAILpING( ; FREQD _LOG/  _ENDED0  LINE1  R2  E OUTCALL3 RECTG  P    ING  ON LY $ o    SPONDENCE ING% ] ^ _ ` a b c    UP4 REC5  TQ _     ED  ! + 5  6  7   @   K   a   k    u               MB6 ION V W t u    !! ""ULD## $$ %%  &&  ''  (( ))  **  ++  ,, !-- #.. &// (00 (11 )22 ,33 244 7 55 M66 [ 77 \ 88 \99 t :: u ;; v << v == v>> ?? @@ AA BB CC DD  EE FF GG HH II JJ KK LL  MM NN OO  PP  QQ RR SS TT UU  VV WW XX  YY ZZ [[ \\ ]] ^^ __ `` aa bb cc N)dd *ee ff gg hh ii TRESTART8 jjSTART9 kk NT ll mm nn oo ! pp %qq ) rr 0ss 1tt 4 uu 6vv 8 ww 9xx P yy Yzz ]{{ _|| a}} l~~ m s v  ~                                            ERC Sg h j k   RYcSIZEVER AGEX  PU    & ,  , 2  :  ;  ; <  < =  >  ?  A  B  B C  D  E  F  G  _ ` c m o q u w x y z { | } ~                                                                                     !! "" ## $$ %% && '' (( )) ** ++ ,, -- .. // 00 11 22 33 44 55 66 77 88 99 :: ;; << == >> ?? @@ AA BB CC DD EE FF GG HH II JJ KK LL MM NN OO PP QQ RR SS TT UU VV WW XX YYCAP; ZZEASED< [[EXIT= \\IDLE> ]]NOTACT? ^^SUPP@ __VLDA ``SANITYB aaELECTEDqbbPINWAITC ccTARTDD dd  IPE eeOPPINGF ff G ggRASHK hh  ii C jj H kk j ll mmFAILnn LSI oo TX|pp EJ qqATDIRL rr E ss  tt  uu  vv ww xx &yy 'zz ,{{ .|| 0}} 3~~ 5 @  E H I J  M  R \  _  `  a  d  y                          D   ! ) 5 6  8 G N  O  P  Q  R  S  T  U  V  Z  [ f  q r w x y }                           ASrSTMV _SHPT OMEU FAILW LOSTX PROXYDB S< V W t u  VIRTY ING       G K  L  M  S  X  Y  [  ]  ^  ^  c  e  q r            ON. 1  b  x       OR)     _ERRK   CONTIG   DENTIALS$   ) < ? IRZ ERR[ ERR\ JOB]  ^ LNMFAIL _FAILED_ MAPSEC BXFAILEDNEWFOLD` PARFILa  RCb FALc STOPd IJOBe _STMf    Fg !!ERR+"" h ## $$IELDi %%ITERIA&& '' y(( )) ** ++ MPj ,, SCj --OSS+.. h // 00 ED;11 <22 k33 l44 55 Pk 66 T77SID88 99 :: ;; << == >> R?? TL@@RUCODEAA RL BB  CC  DD ! EE " FF # GG $ HH % II & JJ dKK eLL l MM q NN OO PP QQ RRCHARn SS_ACKm TTERRo UU p VV Yq WWXSTSERRr XX URs YYNOTSUPPt ZZRENT[[  \\ !]] %^^ )__ +`` 4 aa B bb D cc Qdd Xee Yff mgg phh s ii wjj xkk ll mm nn oo pp  qq rr ss tt  uu  vv ww LYxx yy zz {{ > || > }} ?~~ E G J P  Q \ ^ h m t  }               SOR7   TIDCHANGEu STOMER : ]  T VTDATATYPEERRv  w UNGRANTx  WFy DACz  N{  P- H    SSGNFAILED T! % & ' ( + , - . / 0 1 2 3 4 5 F G R S T \  m      A                     & ' ) * * - 1 3 4 4 6 8 9 : ; A D F F H J J L O S U  U V W Y Y Z [ \ _  _ f f  f  h  m n o p p p q q   r    t   t    t   u u  u u y z {  { { | } }  } ~ ~ ~ ~       !!  "" ##  $$  %%  && ''  (( )) **  ++ ,,  --  ..  //  00 11 22  33 44 55 66 77  88 99  :: ;; << == >> ?? @@ AA BB  CC DD  EE FF GG HH II  JJ KK LL MM NN OO PP QQ RR SS TT UU VV WW XX YY ZZ [[ \\ ]] ^^  __  `` aa bb cc dd ee  ff gg hh ii jj kk ll mm nn oo  pp qq rr ssBASEtt uu vv  ww  xx yy zz {{ || }} ~~  + , - . / 0 1 2 2 3 4  4 5 < > ? B C D G H I c m o r t                                                                     CHECK|   OLENADEVERR}  ER~ GRAM       LINK OST STSYN   OVERUN   FL PATH  TRUNC   YPE  E   $ 0  0 1  2  6 8 F G H  L  g                                   TIME FILCRE INCODE MISMCH TOOLNG YLIGHTO S BALREADYEXISTS LOADEDCORRUPT GTFR  INDISABLE USE   LERR !!OAD""_ERROR.## NOTYETLOADED$$OPEN%%UNRDBL&& VERMISMATCH''ZNOTGEN ((_NAC )) CL** $++ ',, B-- S.. T//  00  11  22 HLPINUSE 33VNOTFND\44 DB+55 CU%66 '77 (88 a99 b:: ;; DDK<<TM$XG_START_SERVE==_ERR >>EACCESSz ??  @@ AA TIVATINGBB DCCLOCK DD  EE  FF GGLLOCATEz HH II  D" JJ tKK INGLL MM  ON NN K OO L PP QQ RRSSIGNSS ING$TT oUUBUG VV WW XX YY ZZ  [[ G\\ H]] |^^  __  `` aa  bb cc ddGERlee  ff  ggCDIV hh TM iiEVENTjjIMAL kk  ll &mm ,nn -oo 1 pp ;qq @rr Fss Gtt Iuu Mvv Mww N xx Syy Tzz V{{ W || X }} Y~~ [ ` f l n o p q r s t u v w w  x y z { | } ~                                           NV  LARATION   b v {  E D M Y  a k      E W DECLARED  ING  ? A X [  \  r         LINE RACT DEF ICTORY   Sm IBUTED) 3  ION OL        !! + "" :## ;$$ ;%% <&& ='' F (( S)) U** a++ g ,, j-- n .. n// u00 z11 22 33 44 55 66 77  88  99  ::  ;; << == >> ?? @@ AA BB CC DD C EE  FF ! GG " HHLER II  JJ <KK [LL p MM uNN vOO  PP QQ  RR SS TT  UU VV WW  XX YY ZZ O# [[ $ \\ SZ]] Y ^^ % __ & `` _Y(aa YP' bb _DISALLOWEDccLOSTdd NOT_VALIDeeSTALEff WITH_HINTgg V$PASS_FILE4hh OPTIONS5ii ERSATIONAL/jjION kk ll ( mm 3nn Eoo bpp cqq hrr iss tt uu vv  ww xx yy zz {{ || }}  ~~ T v  x       ED D G r        R\ f  ING  _  w     _STALL(  UCCESS O) PIED " & ' *  * +  ,  -  .  2 F f o     B,  R-  SMSG.  Y # % % - /  3 4 6 7  7 8 9 : ;  E F G H Q U V a b b i p             FAILpING( ; FREQD _LOG/  _ENDED0  LINE1  R2  E OUTCALL3 RECTG  P    ING  ON LY $ o    SPONDENCE ING% ] ^ _ ` a b c    UP4 REC5  TQ _     ED  ! + 5  6  7   @   K   a   k    u               MB6 ION V W t u    !! ""ULD## $$ %%  &&  ''  (( ))  **  ++  ,, !-- #.. &// (00 (11 )22 ,33 244 7 55 M66 [ 77 \ 88 \99 t :: u ;; v << v == v>> ?? @@ AA BB CC DD  EE FF GG HH II JJ KK LL  MM NN OO  PP  QQ RR SS TT UU  VV WW XX  YY ZZ [[ \\ ]] ^^ __ `` aa bb cc N)dd *ee ff gg hh ii TRESTART8 jjSTART9 kk NT ll mm nn oo ! pp %qq ) rr 0ss 1tt 4 uu 6vv 8 ww 9xx P yy Yzz ]{{ _|| a}} l~~ m s v  ~                                            ERC Sg h j k   RYcSIZEVER AGEX  PU    & ,  , 2  :  ;  ; <  < =  >  ?  A  B  B C  D  E  F  G  _ ` c m o q u w x y z { | } ~                                                                                     !! "" ## $$ %% && '' (( )) ** ++ ,, -- .. // 00 11 22 33 44 55 66 77 88 99 :: ;; << == >> ?? @@ AA BB CC DD EE FF GG HH II JJ KK LL MM NN OO PP QQ RR SS TT UU VV WW XX YYCAP; ZZEASED< [[EXIT= \\IDLE> ]]NOTACT? ^^SUPP@ __VLDA ``SANITYB aaELECTEDqbbPINWAITC ccTARTDD dd  IPE eeOPPINGF ff G ggRASHK hh  ii C jj H kk j ll mmFAILnn LSI oo TX|pp EJ qqATDIRL rr E ss  tt  uu  vv ww xx &yy 'zz ,{{ .|| 0}} 3~~ 5 @  E H I J  M  R \  _  `  a  d  y                          D   ! ) 5 6  8 G N  O  P  Q  R  S  T  U  V  Z  [ f  q r w x y }                           ASrSTMV _SHPT OMEU FAILW LOSTX PROXYDB S< V W t u  VIRTY ING       G K  L  M  S  X  Y  [  ]  ^  ^  c  e  q r            ON. 1  b  x       OR)     _ERRK   CONTIG   DENTIALS$   ) < ? IRZ ERR[ ERR\ JOB]  ^ LNMFAIL _FAILED_ MAPSEC BXFAILEDNEWFOLD` PARFILa  RCb FALc STOPd IJOBe _STMf    Fg !!ERR+"" h ## $$IELDi %%ITERIA&& '' y(( )) ** ++ MPj ,, SCj --OSS+.. h // 00 ED;11 <22 k33 l44 55 Pk 66 T77SID88 99 :: ;; << == >> R?? TL@@RUCODEAA RL BB  CC  DD ! EE " FF # GG $ HH % II & JJ dKK eLL l MM q NN OO PP QQ RRCHARn SS_ACKm TTERRo UU p VV Yq WWXSTSERRr XX URs YYNOTSUPPt ZZRENT[[  \\ !]] %^^ )__ +`` 4 aa B bb D cc Qdd Xee Yff mgg phh s ii wjj xkk ll mm nn oo pp  qq rr ss tt  uu  vv ww LYxx yy zz {{ > || > }} ?~~ E G J P  Q \ ^ h m t  }               SOR7   TIDCHANGEu STOMER : ]  T VTDATATYPEERRv  w UNGRANTx  WFy DACz  N{  P- H    SSGNFAILED T! % & ' ( + , - . / 0 1 2 3 4 5 F G R S T \  m      A                     & ' ) * * - 1 3 4 4 6 8 9 : ; A D F F H J J L O S U  U V W Y Y Z [ \ _  _ f f  f  h  m n o p p p q q   r    t   t    t   u u  u u y z {  { { | } }  } ~ ~ ~ ~       !!  "" ##  $$  %%  && ''  (( )) **  ++ ,,  --  ..  //  00 11 22  33 44 55 66 77  88 99  :: ;; << == >> ?? @@ AA BB  CC DD  EE FF GG HH II  JJ KK LL MM NN OO PP QQ RR SS TT UU VV WW XX YY ZZ [[ \\ ]] ^^  __  `` aa bb cc dd ee  ff gg hh ii jj kk ll mm nn oo  pp qq rr ssBASEtt uu vv  ww  xx yy zz {{ || }} ~~  + , - . / 0 1 2 2 3 4  4 5 < > ? B C D G H I c m o r t                                                                     CHECK|   OLENADEVERR}  ER~ GRAM       LINK OST STSYN   OVERUN   FL PATH  TRUNC   YPE  E   $ 0  0 1  2  6 8 F G H  L  g                                   TIME FILCRE INCODE MISMCH TOOLNG YLIGHTO S BALREADYEXISTS LOADEDCORRUPT GTFR  INDISABLE USE   LERR !!OAD""_ERROR.## NOTYETLOADED$$OPEN%%UNRDBL&& VERMISMATCH''ZNOTGEN ((_NAC )) CL** $++ ',, B-- S.. T//  00  11  22 HLPINUSE 33VNOTFND\44 DB+55 CU%66 '77 (88 a99 b:: ;; DDK<<TM$XG_START_SERVE==_ERR >>EACCESSz ??  @@ AA TIVATINGBB DCCLOCK DD  EE  FF GGLLOCATEz HH II  D" JJ tKK INGLL MM  ON NN K OO L PP QQ RRSSIGNSS ING$TT oUUBUG VV WW XX YY ZZ  [[ G\\ H]] |^^  __  `` aa  bb cc ddGERlee  ff  ggCDIV hh TM iiEVENTjjIMAL kk  ll &mm ,nn -oo 1 pp ;qq @rr Fss Gtt Iuu Mvv Mww N xx Syy Tzz V{{ W || X }} Y~~ [ ` f l n o p q r s t u v w w  x y z { | } ~                                           NV  LARATION   b v {  E D M Y  a k      E }Q DECLARES2NET ODED MPRESSED4 F  VF     PTREF  REASE MENT  YPERR T ING  ON^   TALKC Q HREADS, 7 z   PUJ  STFAI  W$SETDISPLAY_DEF!! WS_QUOTA""INDOWS1## I$$ %%VALUE&&_MCS0'' EP6(( )) LY[ ** ++FAULT ,,  -- .. // 00 %11 '22 (33 ( 44 .55 066 577 :88 < 99 >:: ?;; H<< I == [>> ]?? ^@@ ` AA u BB xCC DD EE  FF  GG  HH  II JJ KK  LL  MM  NN OO PP QQ RR SS TT UU EDFVV WW  XXFONTYYINGZZLEN [[ S\\ ]] L ^^CLI __USTERF``ECTIVE7aa Rbb ?cc R dd EDee ff gg hh xiiFORUSE jjINABLE.kk ll E5 mm Knn  oo  pp qq D rr  ss tt uu  vv ww xx yy zz {{ ||  }} %~~ % ' ( ) * 0  6 9 < = ? D G O O R ] ] ^ ` i j o }                                 KEY _JNL  INGTION    / 5 7 = G J ^ `  b c d m v                         SKEY LATE;NOTFOU^OVF PWD RUJ  INSTALLED  L ACCESS  E CONPFN DATERR ENTRY  TE # # 1 7 9 M O                      D      " ) / 3 4 K L N  N p  z   {                                                !!  ""  ##  $$  %%  && '' ((  )) **CONN ++FAIL ,,SWL --ING0.. M //  00  11  22  33  44  55  66  77  88 ON 99  :: 2;; <<  == >>  ?? @@XIGBL AAGBLSEC BBWCB CCHEADER DD _BUSY EEIMITEDFF ,GG PHH jII  RLJJ KK LL MM NN  S OO PPVERiQQJNS RRKEY SSERR TTLINK UUPORT VVRUJ WWSERVICE XX YM YY TA!ZZ K[[ Z\\  ]] ^^IMREQ __VER ``WSLEX aaMANDbb 8cc  dd eeNIED ff gg "hh )ii Xjj ]kk all bmm nn oo pp qqGNORED rrORMAL8ss SU tt SEE uuITYvv  ww  xx yy zzPARTED{{ ENDENCIESp|| r}}  Yo~~ y z THW  X    QERR LOCKS SUBLCKS UEUE  ING    S CRIPTION  f       OR                    " + / 0 2 3  3 4 : > > B  M W X X X Y Y  Y [ `  e e h i j k l r w }                                          Sr ELECTED#IREDpSTROVF  TINATION     ( (  ) + , - . 5 Q  R V X j            S P QUALTACHED 1 n p w                  ILSNECTED                       " & '   + !! ,"" -## 5$$ 7%% F&& G'' H(( I)) J** P++ V,, a-- d.. j // k00 l11 m22 n 33 o 44 s55 v66 z77 |88 |99 ~::  ;; << == >> ??  @@ AA  BB  CC  DD  EE FF GG  HH II JJ  KK LL MM NN OO PP QQ  RR SS TT UU VV WW XX  YY ZZ [[ \\ ]] ^^ __ `` aa bbIONcc dd ee Sff  ggRMINE hh  ii SETUPERR jj HADINCON kkUNUS ll V8mm |nn  oo ppACTIVE qqLLOC rr  ssRALLOC ttSPL uuSSIGN vvBUSY wwDMTsxxINSET7yy VMOStzzMOUu{{ DSAv||ORBw}}SYSx~~VOLyCLASS MDERR OUNT DMT EXISTS FID OREIGN ICE                                                                    ! # $ $ $ $ & & & ' ) * * + + + , ,  ,  , , - .  . 0 0 1 2 2 3 4 6 6 7 7 7 7 8 9 9 :  ; ; >  ? ? @  @  @ A D D  E E  F  F F G  G I I I J  J K K L L M  N N  N O O O P P Q Q Q Q R R   S    S   T    T   U U  U U V V V  V V W W W W X Y Z Z Z Z   [!! ["" [## \$$ \%% \&& ]'' ](( ^)) ^** `++ `,, b-- c.. f// f 00 f11 g22 g33 h44 o 55 p 66 p77 s88 t 99 t :: t;; u<< u == u>> v?? w@@ w AA xBB xCC xDD yEE y FF zGG zHH |II } JJ ~ KK ~LL MM NN  OO PP QQ RR  SS TT UU VV WW XX YY ZZ [[ \\ ]] ^^ __ `` aa bb  cc dd ee ff  gg hh ii jj kk ll mm nn oo  pp qq rr ss tt uu vv ww xx  yy zz {{ || }} ~~                                                                                                                                                                                                  FID   ULL  S ) O  X \ u {               NACT   MNT !!OUNT ""  ##NAMLNG$$OFE %%TALLOC &&BLK ''CREATED((ERM ))XIST **FOR ++  ,,KNWN --  ..  //MBX 00OUNT 11SPL 22UIT 33 WS44OFFLINE 55  66  X 77NLINE 88 Y 99QUALS ::RCT ;;EQERR <<SELREQ == T1 >>HAMEM ??PEC @@WRTLCK AA _OFFLINEBB FL CC GQINCOMP DDIAGNOSE`EETIC FF  GG  HH  II JJ KK LL  S MM  NNONAL OOPACK PP  QQ LaRRFAI SSINITTTNOT UUOGFULL#VV UEWW #XX 'YY (ZZ 4[[  LM4\\UT_MAIN]]_OUT^^CADD __DEL ``TIONARYaa  bb  cc  dd @ee bff cgg dhh fii jj kkUPDERR ll DS mm ~nn oo pp N qq F]rr  ssFERENCE]tt  Suu  T vv ww  xx  yy zz D{{ V|| Z}} f~~ m t x        SM      TYP  ENVAL OLMNT GITAL      - ; s      SG  R    L  Z  ALLOC ECT  3   EDV zIVE  #  $  %  &  T ] ^ _ ` a b c d g h            S LYORIESW c h  Y                       ! !  - . . 0 3 8 : < < =  ? A B C I I  I L  S  X  Z  [  h q | } ~                                   NTRY   _ERROR   FULL   MASK   NAME OTCRE EMPTY! OPDEF" REF# SYNX$  % TRANS& SABLE P Q X Y  D     #   ' !! -"" 4 ## E$$ F%% G&& H'' P (( c)) c** e++ w,, {-- .. // 00 11 22 33  44 55 66 77 88 99 :: ;; << == >> ?? @@ AAINGX BB CCLLOWDD  EDEECARDFFERR( GGONNECT HH ) II 1JJ 2KK LL MM NN OO ABLE1PP  ED QQ RR SS ) TT * UU VV WW ING XX ( YYVEREDZZ >[[ ?\\ K]] ^^  __  ``  aa  bb cc dd ee  ff + gg -hh .ii 2jj 4 kk Dll Gmm Onn O oo Qpp Sqq Vrr \ss ^tt `uu bvv cww exx fyy gzz o {{ r|| x }} x~~ y ~                   $VOLUME_NAMECLASS+ FRAG, QUOTA  S@MAL- ISSEDQ fOUNT3 7 Q W  s u v x y        D.   ED-  .  /  ; L   PART/ PATCH ERR0  LACEMENT Y  # ( 0  < = H U Y  _ g h E Q Q DISPLAY Q Q Q Q  Q Q Q  Q  Q  Q  Q ASE MENT  YPERR T ING  ON^   TALKC Q HREADS, 7 z   PUJ  STFAI  W$SETDISPLAY_DEF!! WS_QUOTA""INDOWS1## I$$ %%VALUE&&_MCS0'' EP6(( )) LY[ ** ++FAULT ,,  -- .. // 00 %11 '22 (33 ( 44 .55 066 577 :88 < 99 >:: ?;; H<< I == [>> ]?? ^@@ ` AA u BB xCC DD EE  FF  GG  HH  II JJ KK  LL  MM  NN OO PP QQ RR SS TT UU EDFVV WW  XXFONTYYINGZZLEN [[ S\\ ]] L ^^CLI __USTERF``ECTIVE7aa Rbb ?cc R dd EDee ff gg hh xiiFORUSE jjINABLE.kk ll E5 mm Knn  oo  pp qq D rr  ss tt uu  vv ww xx yy zz {{ ||  }} %~~ % ' ( ) * 0  6 9 < = ? D G O O R ] ] ^ ` i j o }                                 KEY _JNL  INGTION    / 5 7 = G J ^ `  b c d m v                         SKEY LATE;NOTFOU^OVF PWD RUJ  INSTALLED  L ACCESS  E CONPFN DATERR ENTRY  TE # # 1 7 9 M O                      D      " ) / 3 4 K L N  N p  z   {                                                !!  ""  ##  $$  %%  && '' ((  )) **CONN ++FAIL ,,SWL --ING0.. M //  00  11  22  33  44  55  66  77  88 ON 99  :: 2;; <<  == >>  ?? @@XIGBL AAGBLSEC BBWCB CCHEADER DD _BUSY EEIMITEDFF ,GG PHH jII  RLJJ KK LL MM NN  S OO PPVERiQQJNS RRKEY SSERR TTLINK UUPORT VVRUJ WWSERVICE XX YM YY TA!ZZ K[[ Z\\  ]] ^^IMREQ __VER ``WSLEX aaMANDbb 8cc  dd eeNIED ff gg "hh )ii Xjj ]kk all bmm nn oo pp qqGNORED rrORMAL8ss SU tt SEE uuITYvv  ww  xx yy zzPARTED{{ ENDENCIESp|| r}}  Yo~~ y z THW  X    QERR LOCKS SUBLCKS UEUE  ING    S CRIPTION  f       OR                    " + / 0 2 3  3 4 : > > B  M W X X X Y Y  Y [ `  e e h i j k l r w }                                          Sr ELECTED#IREDpSTROVF  TINATION     ( (  ) + , - . 5 Q  R V X j            S P QUALTACHED 1 n p w                  ILSNECTED                       " & '   + !! ,"" -## 5$$ 7%% F&& G'' H(( I)) J** P++ V,, a-- d.. j // k00 l11 m22 n 33 o 44 s55 v66 z77 |88 |99 ~::  ;; << == >> ??  @@ AA  BB  CC  DD  EE FF GG  HH II JJ  KK LL MM NN OO PP QQ  RR SS TT UU VV WW XX  YY ZZ [[ \\ ]] ^^ __ `` aa bbIONcc dd ee Sff  ggRMINE hh  ii SETUPERR jj HADINCON kkUNUS ll V8mm |nn  oo ppACTIVE qqLLOC rr  ssRALLOC ttSPL uuSSIGN vvBUSY wwDMTsxxINSET7yy VMOStzzMOUu{{ DSAv||ORBw}}SYSx~~VOLyCLASS MDERR OUNT DMT EXISTS FID OREIGN ICE                                                                    ! # $ $ $ $ & & & ' ) * * + + + , ,  ,  , , - .  . 0 0 1 2 2 3 4 6 6 7 7 7 7 8 9 9 :  ; ; >  ? ? @  @  @ A D D  E E  F  F F G  G I I I J  J K K L L M  N N  N O O O P P Q Q Q Q R R   S    S   T    T   U U  U U V V V  V V W W W W X Y Z Z Z Z   [!! ["" [## \$$ \%% \&& ]'' ](( ^)) ^** `++ `,, b-- c.. f// f 00 f11 g22 g33 h44 o 55 p 66 p77 s88 t 99 t :: t;; u<< u == u>> v?? w@@ w AA xBB xCC xDD yEE y FF zGG zHH |II } JJ ~ KK ~LL MM NN  OO PP QQ RR  SS TT UU VV WW XX YY ZZ [[ \\ ]] ^^ __ `` aa bb  cc dd ee ff  gg hh ii jj kk ll mm nn oo  pp qq rr ss tt uu vv ww xx  yy zz {{ || }} ~~                                                                                                                                                                                                  FID   ULL  S ) O  X \ u {               NACT   MNT !!OUNT ""  ##NAMLNG$$OFE %%TALLOC &&BLK ''CREATED((ERM ))XIST **FOR ++  ,,KNWN --  ..  //MBX 00OUNT 11SPL 22UIT 33 WS44OFFLINE 55  66  X 77NLINE 88 Y 99QUALS ::RCT ;;EQERR <<SELREQ == T1 >>HAMEM ??PEC @@WRTLCK AA _OFFLINEBB FL CC GQINCOMP DDIAGNOSE`EETIC FF  GG  HH  II JJ KK LL  S MM  NNONAL OOPACK PP  QQ LaRRFAI SSINITTTNOT UUOGFULL#VV UEWW #XX 'YY (ZZ 4[[  LM4\\UT_MAIN]]_OUT^^CADD __DEL ``TIONARYaa  bb  cc  dd @ee bff cgg dhh fii jj kkUPDERR ll DS mm ~nn oo pp N qq F]rr  ssFERENCE]tt  Suu  T vv ww  xx  yy zz D{{ V|| Z}} f~~ m t x        SM      TYP  ENVAL OLMNT GITAL      - ; s      SG  R    L  Z  ALLOC ECT  3   EDV zIVE  #  $  %  &  T ] ^ _ ` a b c d g h            S LYORIESW c h  Y                       ! !  - . . 0 3 8 : < < =  ? A B C I I  I L  S  X  Z  [  h q | } ~                                   NTRY   _ERROR   FULL   MASK   NAME OTCRE EMPTY! OPDEF" REF# SYNX$  % TRANS& SABLE P Q X Y  D     #   ' !! -"" 4 ## E$$ F%% G&& H'' P (( c)) c** e++ w,, {-- .. // 00 11 22 33  44 55 66 77 88 99 :: ;; << == >> ?? @@ AAINGX BB CCLLOWDD  EDEECARDFFERR( GGONNECT HH ) II 1JJ 2KK LL MM NN OO ABLE1PP  ED QQ RR SS ) TT * UU VV WW ING XX ( YYVEREDZZ >[[ ?\\ K]] ^^  __  ``  aa  bb cc dd ee  ff + gg -hh .ii 2jj 4 kk Dll Gmm Onn O oo Qpp Sqq Vrr \ss ^tt `uu bvv cww exx fyy gzz o {{ r|| x }} x~~ y ~                   $VOLUME_NAMECLASS+ FRAG, QUOTA  S@MAL- ISSEDQ fOUNT3 7 Q W  s u v x y        D.   ED-  .  /  ; L   PART/ PATCH ERR0  LACEMENT Y  # ( 0  < = H U Y  _ g h E } DISPLAYABLE ED= I  i  ING _ID3  SHORT1  YERR  RECONNECT2   Q3   TRIBUTED   USER4 VBYZERO6  7  8  _ZER5 IDE6  9              NDSION5  7  8   R !! V "" ##  $$  %% OR&&ZERO9 '' ME: (( ; )) P2** $V_ALPHADUMP++VAXDUMP.,,ERLEVT--FRG2..RELEXITz// T$s00 NA< 11 F= 22 R> 33 S 44 )55 *66 477 ? 88$ADVER.99 U:: V;; DEFAULT_T<< FILE%== &>> '?? (@@ RAA SBB SOLICIT_MBX,CC 1DD 2EE UFF VGGOCUMENTI HH J II `JJ qKK LL MM NN OO PP QQ RR SS ATIONTT rUU VV WW XX  SYYDCLHELPZZ ES[[ \\ ]] ^^ __  `` aa bb cc dd ee ff gg hh (ii ,jj .kk 3ll 6mm 9nn :oo ;pp =qq >rr > ss @tt A uu Fvv Gww Ixx Iyy Izz K{{ M|| N}} Y~~ Z ] ]  ^ ^ ^ ^  _ _ ` `  a b c p r x z                                                                             N    TFITB  IUNAVAILABLE5MAIN  5 > \ h t y            NE~    MSGC  Se 11_BADLABELD  LOCKSIZEE IOERRORF  POSITIONG ETVOLH TSPACKI UNPACKJ  UBLDALOCK EALOL  E. K  L    WN     B J P  P T  GRADEi PEM  TT   $B_TYPEV  QCLUSN   RELOABS  NOSEC  OVRQ SEC YMIVE ' D  Q  R  w  NAMO  R     ' ) +    8!! :"" D## O $$ P %% S && T '' U (( V )) V** W++ e,, f-- j.. l// o 00 v11 ~22 33 44 55 66  77 88  99 ::NOTSHUTP ;;MHIERARCHYFAIL<<MAINFETCHFAIL==POPUPFETCHFAIL>> REGISTERFAIL??STRINGFETCHFAIL@@VERRQ AA R BBXISTSS CC NOTVALIDT DDRSTRTV EE _NOUNLOADU FFSAQUOTAX GG CHH MCLUFAILW IIPIN_USEY JJRTOC KK SIZ LL TYMMTFACC[ NNCDDREC\ OOFGFIL] PP RE^ QQ VT_ RRDEFFIL` SSQUASYNa TTVALb UUSESESTc VVTERd WWTRATBLe XXUNSTYPf YYVERMISg ZZ K$M[[ Ph \\ RBADMAILi ]]SDTR^^UALj __LOCj ``DRIVER+ aa E bb cc dd  ee  ff gg hh ii (jj ,kk /ll ; mm [nn noo opp qq rr ss tt uu MPvv ww xx  yy  zz {{  ||  }}  ~~          ! . 1 3 4 ; F O P R  S W Y Z [ f  k  k  l  m  n  p v x z {                          BLKSREL{ ED  MPTYl RRSm INCOMPLn  G*  MOD Po  p ACMEHBLKNUMq UFNAMEr  CHARNAMEs   UMt OMFILu  NREDTYP$DEFv VSPCw SKQUOTAx  FILENAMEy ORMz NAME{ GLOBAL| IDENT}  ~ NVALID KEY   MAP  LIST LABEL   ICATE  < E  O Y Z o  p  q  s  t  v  w  x  y  z  {  }                             Sn USER _ID NAM MOD ULE    SG OPT   PLACE   REFIX    OD  MPT   QUAL REC DSYN VN SYM NTAX TYPE UNIT  NOVALUE OLNAM _OUTPUT RATIONING  ' ( - . 0    1!! 2"" 3## A$$ F %% I&& S'' ^(( ^)) b** c++ f,, h-- i.. n// o00 p11 w22 x33 y44 z 55 ~ 66 77 88 99 :: ;; << == >> ?? @@ AA BB CC DD EE FF GG HH II JJ KK LL MM NN OO PP  QQ RR SS TT  UU VI VV N WW RXX YY ZZ [[ \\ X1 ]] 2 ^^ YN$C_DPTV__AMIC`` %aa : bb ; cc Ldd  ee  ff  gg  hhMEMiiZROTjj_ISD kkEARLIERll mmSILYnn YuooCHO}pp EDqq O3rr ss tt  uu  vv ww xxNOTSET yySET zzDIT*{{ ||DEVICE}}ERR/~~ING0 b   OR) / B        PROC  S   CLSH OUTSEQ  T FBLK}  D FECT  H _ALRFRE RES RESSYS IGHT BIT+THER *  K S  LD EALREXI INUSE MENTE \ ] ^ e  o p         S   TOOLON VATED  F   $ & ' ( ) * / = U W    LIB(IGIBLEMINATE SEF z  V MB6 EDDED PTY!  / _ i t w x y y                 FILE    HIST  IN JOB KMLIST LIBRARY  ST NEST _CHECK  SKNOTABS   TLDB ULATED=ION.   ORNABLE 5 6 7 P Q X Y     D !   #    %   5    =   ? E F N p y                 !!ING""  ##QUOTA $$CALGNOT%%BSRNOT&&FINERR''INIERR((KEYMAT))WLDMAT^**LOSURE++NOTSUP,,ODEq-- r.. // R00ING 11 :22 ;33 <44 =55 66UNTERED77 88 99 :: ;; +<< ,== />> 1?? 2@@ 3AA 5BB 8CC :DD <EE <FF =GG >HH ?II @JJ AKK BLL CMM DNN EOO GPP HQQ Q RR R SS STT S UU T VV TWW U XX UYY V ZZ W [[ X \\ Z]] ]^^ f__ f`` gaa h bb icc p dd v ee ~ff gg hh ii jj kk  ll mm nn oo pp  qq  rr  ss tt  uu vv  ww xx  yy  zz {{  ||  }}  ~~                   QUAIGNRYPERR T       $ ED  ING  ON             SAVSET D          $ % - . / 0  L M M ` a o s y y y z |                                                  ABORT BUS DIAGS  ED        D  T VENT IF F NG8 _ x  M l   NOOBJ OFBUF DOC`FILE   SEQaTAPE VOLUME PRS  R  S    UBROUTINEzTOPIC UBA   WRNGMAC           _DEVICE#   & PRIVATEZGAGERRINGLISH USED OUGH  " . 7 8 L Z         Q !! LM ""UEUE8 ## 9 $$  %%SURE&& T '' ER7(( s )) ** ++  ,, -- ..  // 00 ED11 !22 q33  44  55 66 77 88ING 99  ::  ;;LOST << R ==FIL >> ND??IDMTCHZ@@  AA  B BB  O CC  T DD REDEE FF GG TYHH ZII v JJ  KK LL  MM NN  OO  PP  QQ  RR  SS  TT  UU VV WW NF XXOTDJ YYFNDZZ OU [[RANCE\\IES]] ^^ W__ | `` } aa  bb cc Ydd ee ff gg hh ii jj kk  ll !mm "nn "oo #pp (qq +rr +ss -tt -uu /vv 1ww 3xx 5yy 5zz 6{{ 8|| ;}} < ~~ < = @  A D F G L M P S  S T  Y  [ \ _ c f f h i j  n o q r s t t  t u u v v w w  w x x  x y z { | | } } ~ ~  ~                                                                      DELONLY SIZDIFM V    IRONMENT @ @  C D N         SNOTSET  OD FV w        MISMATCH  M{ERROR FATAL  TLB    STK   WARN    T    IN   QUAL  < n      S~ IVALENCE  T  V_NOTICE RACTED SEBLKS  D   FAIL ING F   LBUFFERPAGES!!TOOBIG""RAT_LIN ##CACHFUL $$ LOSELOGFILI%%REKBD &&VTFIL ''OPN ((DURREC ))EXECOM **FIL ++OPN ,,REA --  P ..FREDYN //HALT 00INPFIL 11LOGb22LIN 33MAPAUTH44NOAPPLY55OPENCONFIGSFILJ66LOGFILK77 RESTARTFILL88 R 99 :: ;;  << ==  >> ?? @@ AA  BB  CC DD EE FF  GG  HH II  JJ KK LL MM  NN OO PP QQ  RR SS TT UU VV WW  XX YY ZZ  [[  \\  ]]  ^^  __  ``  aa  bb  cc  dd  ee  ff  gg  hh  ii  jj  kk  ll mm nn oo pp  qq rr ss tt uu vv  ww  xx yy zz {{ ||  }} ~~                                                E jDBERROR                             ! ! " " " # # #  # $ $ $  $  $  %!! %"" %## % $$ %%% %&& &'' &(( &)) &** '++ ',, '-- '.. '// '00 (11 (22 (33 ( 44 (55 (66 (77 )88 *99 *:: +;; + << +== +>> ,?? ,@@ , AA ,BB ,CC -DD -EE -FF -GG -HH .II .JJ /KK /LL /MM 0NN 0OO 0PP 0 QQ 0RR 1SS 1TT 1UU 1 VV 1WW 1XX 2YY 2ZZ 2[[ 2\\ 3]] 3^^ 3__ 3`` 3aa 3bb 4cc 4dd 4 ee 4ff 4gg 4hh 5ii 5jj 5kk 6ll 6mm 6nn 7oo 7 pp 8qq 8 rr 8 ss 8tt 8uu 9vv 9ww 9xx 9yy :zz :{{ :|| :}} :~~ ; ;  ; ; < < < < =  = = = = = = > >  > > > > ? ? ? ? ? @ @ @ @ @ A A A A B B B C C C C D D  D D D D E  E E E F F  F  F F G G  G G G H H  H H H H I I I  I I I J J J  J  J  J J J K K  K  K K L L L L L M M  M  M  M  M M M N N  N N N O O O O P P P Q Q  Q  Q Q R R  R  R R R S S S  S  S S S S S T T  T T T T U    U   V    V    V   W W  W W W X  X  X  X X X Y Y  Y Y Y Z Z Z   [ !! [ "" [## [$$ \ %% \&& ] '' ] (( ])) ^ ** ^ ++ ^,, ^-- _ .. _// ` 00 a 11 a22 a33 b44 c55 c 66 c 77 c88 d99 e:: e ;; e << e == f>> g?? g @@ gAA hBB hCC h DD h EE iFF iGG j HH kII kJJ lKK mLL mMM nNN nOO oPP oQQ oRR oSS pTT p UU pVV pWW pXX pYY q ZZ q[[ q\\ r]] r ^^ r__ r`` saa s bb scc sdd see tff tgg uhh uii v jj vkk vll vmm wnn w oo w pp wqq x rr xss ztt zuu {vv {ww |xx |yy |zz |{{ | || |}} |~~ }  ~ ~  ~  ~ ~                                                                                                                                                                                                                    !! ""  ## $$ %%  && '' (( )) ** ++  ,, -- .. //  00 11  22 33 44  55 66 77  88 99 :: ;; << == >>  ?? @@ AA BB  CC DD EE FF GG HH II JJ KK LL  MM NN OO PP QQ RR SS TT UU VV WW XX YY ZZ [[  \\  ]] ^^  __ `` aa bb cc  dd ee ff gg  hh  ii jj kk ll mm nn oo pp qq rr ss tt uu vv  ww xx yy zz {{ || }} ~~                                                                                                                                                                                                                  !! "" ## $$ %% && ''  (( )) **  ++ ,, -- .. // 00  11 22 33 44  55  66 77 88  99  :: ;; <<  == >> ??  @@ AA  D !   #    %   5    =   ? E F N p y                 !!ING""  ##QUOTA $$CALGNOT%%BSRNOT&&FINERR''INIERR((KEYMAT))WLDMAT^**LOSURE++NOTSUP,,ODEq-- r.. // R00ING 11 :22 ;33 <44 =55 66UNTERED77 88 99 :: ;; +<< ,== />> 1?? 2@@ 3AA 5BB 8CC :DD <EE <FF =GG >HH ?II @JJ AKK BLL CMM DNN EOO GPP HQQ Q RR R SS STT S UU T VV TWW U XX UYY V ZZ W [[ X \\ Z]] ]^^ f__ f`` gaa h bb icc p dd v ee ~ff gg hh ii jj kk  ll mm nn oo pp  qq  rr  ss tt  uu vv  ww xx  yy  zz {{  ||  }}  ~~                   QUAIGNRYPERR T       $ ED  ING  ON             SAVSET D          $ % - . / 0  L M M ` a o s y y y z |                                                  ABORT BUS DIAGS  ED        D  T VENT IF F NG8 _ x  M l   NOOBJ OFBUF DOC`FILE   SEQaTAPE VOLUME PRS  R  S    UBROUTINEzTOPIC UBA   WRNGMAC           _DEVICE#   & PRIVATEZGAGERRINGLISH USED OUGH  " . 7 8 L Z         Q !! LM ""UEUE8 ## 9 $$  %%SURE&& T '' ER7(( s )) ** ++  ,, -- ..  // 00 ED11 !22 q33  44  55 66 77 88ING 99  ::  ;;LOST << R ==FIL >> ND??IDMTCHZ@@  AA  B BB  O CC  T DD REDEE FF GG TYHH ZII v JJ  KK LL  MM NN  OO  PP  QQ  RR  SS  TT  UU VV WW NF XXOTDJ YYFNDZZ OU [[RANCE\\IES]] ^^ W__ | `` } aa  bb cc Ydd ee ff gg hh ii jj kk  ll !mm "nn "oo #pp (qq +rr +ss -tt -uu /vv 1ww 3xx 5yy 5zz 6{{ 8|| ;}} < ~~ < = @  A D F G L M P S  S T  Y  [ \ _ c f f h i j  n o q r s t t  t u u v v w w  w x x  x y z { | | } } ~ ~  ~                                                                      DELONLY SIZDIFM V    IRONMENT @ @  C D N         SNOTSET  OD FV w        MISMATCH  M{ERROR FATAL  TLB    STK   WARN    T    IN   QUAL  < n      S~ IVALENCE  T  V_NOTICE RACTED SEBLKS  D   FAIL ING F   LBUFFERPAGES!!TOOBIG""RAT_LIN ##CACHFUL $$ LOSELOGFILI%%REKBD &&VTFIL ''OPN ((DURREC ))EXECOM **FIL ++OPN ,,REA --  P ..FREDYN //HALT 00INPFIL 11LOGb22LIN 33MAPAUTH44NOAPPLY55OPENCONFIGSFILJ66LOGFILK77 RESTARTFILL88 R 99 :: ;;  << ==  >> ?? @@ AA  BB  CC DD EE FF  GG  HH II  JJ KK LL MM  NN OO PP QQ  RR SS TT UU VV WW  XX YY ZZ  [[  \\  ]]  ^^  __  ``  aa  bb  cc  dd  ee  ff  gg  hh  ii  jj  kk  ll mm nn oo pp  qq rr ss tt uu vv  ww  xx yy zz {{ ||  }} ~~                                                E }M ERRORISUE  LOGBUFFERS( S                 "  A  N Q Z c k  m  v         _HALT LOGUTLOGcOPN PARSE  DFPRD!!HOTRA ""ROMPT ##REC $$FIL %%  &&OUCAL '' SYMACTIVE ((SINFO ))TSTMOD **VIRDPY ++ WRITELOGFILM,, _NOCREATE--SERVER..TART//  OP00 SA 11CAPE 22 B33 C44 d55 66 77 88 99 :: ;; <<INGW== L >> S ??TABCON @@LISHAA BB CC  EDDD )EE FF GG HH II ING JJ c KKTHERNET)LL IR MMVADE NNSION OO PP QQ RR ENSS TTT UU  VV  WW XX ! YY # ZZ /[[ =\\ D]] e^^ |__ |`` aa bb cc dd ee ff gg hh ii jj kk ll mm nn  oo  pp  qq  rr ss  tt  uu vv ww xx S yy zz {{ || }} ~~   _OCCURRED!  L"  TNOTENAB# TOOLRGYPIGN$ XACT LY_ORDER RANGE% STLM& BIOLM' UFOBJLM( YTLM) CCOP* LOS+ EED    ED    &  '  (  )  * ,  0 3  4 4  8  9  :  ;  F  I  N  Q  T  U V W X [ ^  ^ _  c e j  z                                  S   # %  & &  ( ,  , 1  : I J K T _ ` m n p v                   PTION            *  +  -  - .  . /  /  3 8 C F T ` |                                       S1  D  _ENTRY      SS!! ""IVE8## U$$ %%HANGEr&&LUDE'' ((SION)) VEO** ++ PC2NATIVE. ,,VAX/ -- SC0 ..TSTER1 //UTIM2 00DEPTH11IOLM3 22SKQUOTA4 33 E,44 I55 J66 77 88 99ABOFAIL:: C4 ;; R<< X== i>> ??UTABLEU@@ EAA BB CC DD EE FF GG HH II JJ KK SLL qMM w NN x OO  PP  QQ  RR  SS  TT DUU _VV `WW aXX  YY ZZ [[FAIL5 \\_ONLYC ]]ING'^^ 6 __ ``  aa bb ONcc 5 dd < ee >ff ?gg Ahh Aii Njj g kk yll zmm nn oo pp qq rr ss VE tt ORuuINSFAILvv NOTNATIVE7 wwQLM8 xx 9 yyPOUFAILzzRCFAIL{{UFAIL||STFAIL}}RELFAIL~~MVFAILSTAFAILPFAILUPGFAILFILLM:  GBLPAGFIL; HAUSTED :  ;  O P       IONQ fFUL< NEVCAL= IST      ( 3 9 ; = > >  ? I I M S  S Z ]  `  x                                ENCE> ING  1 7 A B J  `  }          S      ) 2 4 < ?  @  [ e  e g n p q  r  s t                             T   =  A  D  H T                  ED FAILA ORCEDH IF NGB  D  S z  STATUSC _THREADD  LABELERRE ICENSEF NMQUOTAG    PH !!AGQUO"" I ## NDJ $$ R%% V && ED ''  ((  )) **PHDJ ++SION,, F--COMPLEXK ..ECTED // 00  11  22  33 !44 '55 /66 477 E88 L 99 M :: P ;; U << m== >>  ??  @@ AA BB CC DD EE FF GG HH II JJ KK LL MM  NN OO  PP QQRIENCED RR |SSFILM TT GFLQUOTAN UUIRATION6VV H WW EDXX  YY ZZ  [[ 2 \\ B ]] C ^^ O __ e`` aa bb cc dd  ee  ff ggJFILP hhLICIT ii  jj  LY1kk ll mm ONENTIATION#nn oo RT1ppQUOTAQ qqVR32R rr S ssRCLMT ttECMSGU uu G|vv }ww xxSSIONyy zz  {{  || %}} F~~ K  R  S  W  X  Y  Z  [  \  ]  ] b              SHRPATV TACKCW   OX   UY KOVRZ  YN[ TOOCOM\ LRG] QUOTA^  _    T` AUTH BITa CACHIVb END`  c  g   ED5 : @ M d  f  }ING SION  <  C G N c d e  e h  h i  i     Tb  RNAL " 0 y          LYINDEXFf MSGUNS0NOTFOUh   NDi _ERRg PWDERRQELMj  RA CTa   EDE k ION$  ENDMl NEOUSl  m  ARGSm PARMn _ERRe F11BXQPL AB 6 o  p  q    Cr ILITY    ! b i s  v             OVFLs TBADt  u OOLONGv  R     Yt    u    ILw   CONF    NNM! ED                           !! "" ## $$  %% && '' (( ))  ** ++ ,, -- .. // 00 11 22  33 44 55 66 77  88 !99 ":: $;; %<< '== )>> -?? .@@ /AA 0BB 1CC 2DD 2EE 6FF 7GG 7HH 8II =JJ AKK CLL EMM E NN GOO H PP I QQ J RR KSS RTT RUU SVV T WW W XX _ YY _ZZ _[[ ` \\ b ]] d ^^ j __ n`` uaa w bb x cc ydd y ee yff zgg z hh z ii {jj { kk |ll | mm }nn ~oo  pp qq rr ss tt uu vv  ww xx  yy zz {{ || }} ~~                                                                            CMDFREVMz GETVM{  | HAILING LOOKUPOVER}  URE                 + 6 7 8 E G L  N O P Y Z Z Z  [ o  s u v x y z { { } ~                                                                _STATUS OPEFIL   LLENq!! S"" SE8##NDLE6$$ >%%BUSY>&& O'' (( )) ** f++  ,,  --  ..  //  00  11 22BUG 33  44FAIL55  66  77  88 R99 l::TAL$;; )<< + == , >> .?? 1@@ 1AA 2BB 9CC CDD Q EE R FF p GG sHH vII vJJ |KK ~LL MM  NN OO  PP  QQ  RR  SS  TT  UU  VV  WW  XX  YY ZZ  [[  \\ ]] ^^ __ `` aa bb cc dd  ee ffERR gg hh  ii  ORCjj  kk ll XC mm  PT nn OPoo_ERR1ppERR qqLIB rr  ss  ttINTERR uu  vvLQUALww U xx LT yy zz 0 {{ 3|| 4}} 5~~ : ; <                   YBIC CB < =LOSE2FAIL2 P>READERR PSTN WNDERR SPACERR WRITERR  DEXNORCV  L   CNVERR3ERROR FILERR4OPTERR5PARSE EATURE 4 7 I J K L M M a       EDBACK  L NCEPOST TCH    ERROR~ ING~  W   ERb | }   X  FVSADDER DIVER MLTER SBTER VADDER DIVER MLTER SBTER IBRE POLL  D ERROR NOTFND UM_ZERO  S_NMX UMSEQEINALI  LD    ' < = > ? Q ] ] ] ^ _ ` a b c h i  n p q v                                  RESERVED}   S(   / L    GURE L11_NOREC ACCERR   DDED LRACC REDIF  BACKWARD DBLKCLSERRNTNONZ DID~FIDSABL KONLY   E!! ""  ##  $$ %% && '' (( )) ** ++ ,, -- .. // 00  11 22  33 44 55 66 77  88  99 :: ;;  << == >> ??  @@  AA  BB  CC  DD  EE  FF  GG  HH  II  JJ  KK  LL  MM  NN  OO  PP  QQ  RR  SS  TT  UU  VV WW  XX  YY ZZ [[ \\  ]]  ^^ __ `` aa bb cc dd ee ff gg hh ii jj  kk  ll mm nn oo pp qq rr ss  tt  uu  vv ww xx  yy zz {{ || }} ~~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``M 5aaM 5bbM 6ccM 6ddM 6eeM 6ffM 7ggM 7hhM 7 iiM 7jjM 8kkM 8llM 9mmM 9nnM 9 ooM : ppM :qqM :rrM :ssM :ttM ; uuM ;vvM < wwM < xxM < yyM <zzM ={{M =||M = }}M =~~M =M >M >M >M >M >M >M ?M ? M ?M ?M ?M ?M @M @ M @ M @M @M AM AM BM CM C M CM CM DM DM DM DM EM EM EM EM FM FM FM FM FM GM GM GM GM HM HM H M HM HM HM HM IM IM IM IM IM JM JM J M JM JM KM KM KM KM K M K M LM LM LM LM LM MM MM MM MM MM M M M M M M MM MM MM MM MM NM NM NM N M NM NM NM NM NM NM OM OM OM O M OM OM PM PM P M P M PM PM PM QM Q M QM QM QM RM RM R M R M RM RM RM SM S M S M SM SM SM SM SM SM SM TM TM TM TM TM UM U M UM UM UM V  M V  M V  M V   M V  M VM WM WM WM WM X M XM XM YM YM YM YM YM ZM ZM ZM [M [M [   M [ !!M [""M \##M \$$M \ %%M \ &&M \ ''M \((M \))M \**M ]++M ] ,,M ] --M ]..M ^//M ^ 00M ^11M _22M `33M ` 44M ` 55M `66M `77M a88M a 99M a ::M a ;;M a<<M b==M b >>M b ??M b@@M cAAM cBBM c CCM c DDM cEEM dFFM dGGM dHHM dIIM dJJM d KKM dLLM dMMM eNNM eOOM ePPM eQQM fRRM fSSM fTTM f UUM f VVM gWWM gXXM gYYM g ZZM g [[M g\\M g]]M h^^M h __M h``M haaM ibbM iccM iddM jeeM jffM kggM khhM k iiM k jjM kkkM kllM kmmM lnnM l ooM l ppM l qqM lrrM lssM lttM muuM m vvM mwwM mxxM nyyM nzzM n {{M n||M n}}M o~~M oM oM o M o M oM oM oM pM pM pM p M qM qM qM q M q M rM rM r M r M rM sM sM sM tM tM t M t M tM uM u M u M uM vM v M vM vM wM wM w M wM wM wM xM xM x M xM xM xM xM yM yM y M y M yM zM zM z M zM zM {M {M {M {M {M {M {M |M |M | M | M |M |M }M }M }M } M }M }M }M }M ~M ~M ~M ~ M ~M M M M M  M  M M M M M M M  M M M  M  M M M M M M M  M M M M M M M M M M  M M M M M M M M M M M M M M M  M M M M   M   M   M   M    M  M  M M M M M M M  M M M M M M M M M M    M  !!M  ""M ##M $$M %%M  &&M ''M ((M ))M **M ++M ,,M --M ..M //M 00M 11M 22M 33M 44M 55M  66M 77M 88M 99M ::M ;;M  <<M ==M >>M ??M @@M  AAM BBM CCM DDM EEM FFM  GGM HHM IIM JJM KKM LLM  MMM  NNM OOM PPM QQM RRM SSM TTM  UUM VVM WWM XXM YYM ZZM [[M  \\M  ]]M ^^M __M ``M aaM bbM ccM  ddM  eeM ffM ggM hhM iiM  jjM  kkM llM mmM nnM ooM ppM  qqM  rrM ssM ttM uuM vvM  wwM  xxM yyM zzM {{M ||M }}M ~~M M  M M M M M M  M  M M M M M M M M M  M M M M M M M M M M M M  M M M M M M M  M M M M  M M M M M M M M M  M M M M M M M  M  M M  M  M M  M M M M M  M M M M M M M  M M M M  M  M  M  M M M M M M  M  M  M  M M M M  M  M  M M  M  M M  M  M  M  M M M  M  M  M  M  M M M M  M  M M M  M  M M M M M M M M M M M M M  M  M M M M    M   M   M    M   M M M  M M M M  M  M M M  M  M  M  M M M  M M   M  !!M  ""M ##M $$M %%M  &&M  ''M ((M ))M  **M ++M ,,M --M ..M //M  00M  11M  22M 33M 44M 55M 66M 77M 88M 99M  ::M  ;;M <<M ==M >>M ??M @@M  AAM BBM CCM DDM  EEM FFM GGM HHM IIM JJM KKM LLM  MMM NNM OOM PPM QQM  RRM SSM TTM UUM VVM  WWM  XXM YYM ZZM  [[M \\M ]]M  ^^M  __M ``M aaM  bbM ccM ddM eeM  ffM ggM hhM iiM  jjM kkM llM  mmM  nnM ooM  ppM qqM rrM  ssM ttM uuM  vvM  wwM xxM yyM  zzM  {{M ||M  }}M  ~~M  M  M M M M M  M  M M M M  M  M M M M M M M  M  M M M  M  M  M M M  M  M M M  M M  M  M M M  M M M M M M  M M M M M  M M M M M  M M M  M  M M M M  M  M M M M M  M  M  M M M M M M M M  M M M  M M M M  M  M M M M M M M M M M M M M M M M M M M M M M  M M M M  M M M  M M M M M  M M M M M M M M M M M M M M  M  M M M   M   M   M   M   M M M  M  M M M M M  M M M M M M M  M M M   M !!M ""M ##M  $$M %%M &&M ''M ((M ))M **M ++M ,,M --M ..M //M 00M 11M 22M 33M 44M 55M 66M  77M 88M                                  _STATUS OPEFIL   LLENq!! S"" SE8##NDLE6$$ >%%BUSY>&& O'' (( )) ** f++  ,,  --  ..  //  00  11 22BUG 33  44FAIL55  66  77  88 R99 l::TAL$;; )<< + == , >> .?? 1@@ 1AA 2BB 9CC CDD Q EE R FF p GG sHH vII vJJ |KK ~LL MM  NN OO  PP  QQ  RR  SS  TT  UU  VV  WW  XX  YY ZZ  [[  \\ ]] ^^ __ `` aa bb cc dd  ee ffERR gg hh  ii  ORCjj  kk ll XC mm  PT nn OPoo_ERR1ppERR qqLIB rr  ss  ttINTERR uu  vvLQUALww U xx LT yy zz 0 {{ 3|| 4}} 5~~ : ; <                   YBIC CB < =LOSE2FAIL2 P>READERR PSTN WNDERR SPACERR WRITERR  DEXNORCV  L   CNVERR3ERROR FILERR4OPTERR5PARSE EATURE 4 7 I J K L M M a       EDBACK  L NCEPOST TCH    ERROR~ ING~  W   ERb | }   X  FVSADDER DIVER MLTER SBTER VADDER DIVER MLTER SBTER IBRE POLL  D ERROR NOTFND UM_ZERO  S_NMX UMSEQEINALI  LD    ' < = > ? Q ] ] ] ^ _ ` a b c h i  n p q v                                  RESERVED}   S(   / L    GURE L11_NOREC ACCERR   DDED LRACC REDIF  BACKWARD DBLKCLSERRNTNONZ DID~FIDSABL KONLY   E!! ""  ##  $$ %% && '' (( )) ** ++ ,, -- .. // 00  11 22  33 44 55 66 77  88  99 :: ;;  << == >> ??  @@  AA  BB  CC  DD  EE  FF  GG  HH  II  JJ  KK  LL  MM  NN  OO  PP  QQ  RR  SS  TT  UU  VV WW  XX  YY ZZ [[ \\  ]]  ^^ __ `` aa bb cc dd ee ff gg hh ii jj  kk  ll mm nn oo pp qq rr ss  tt  uu  vv ww xx  yy zz {{ || }} ~~                                                          ! ! ! !  ! ! " " # # # $ $ } FILEACC  CONVERTED REATEERROR6GONE  IN LOCK   ED  MPTY  NABL   ME    & @ I R S W r s ~            !! "" ## $$  %%  && ''  ((  )) ** ++ ,, INVAL--  S~..MOD7//OTFOUND 00OPEN11UMCHK22OPEN 33 44 UT 55PURGED 66 S77 88  99 :: ;;  << "== #>> (?? .@@ 2AA 3BB 8CC <DD I EE J FF MGG THH \II cJJ cKK f LL fMM hNN mOO pPP zQQ ~RR SS TT UU VV  WW  XX YY ZZ [[ \\  ]]  ^^ __  ``  aa bb cc dd ee  ff gg hh ii jj kk ll mm  nn oo pp qq rr ss tt uu vv ww xx yy zzEQCHK{{OPEN ||PEC>}} d~~                   TRUCT    TOOBIG YPESF G_ABSENT EMPTY XISTS NAMEqFAIMAT  IDORWARD  L      ED IM  NG M   MARKAI  BI  RU ODIFD NAMERRVERRODIRPOST  PFTACC  I BACK  I CNTG DEL INS EXP   FND INS PUR OPNERRPURGED RDERREMOVED  QD STRUNSTER  OOLON   RNERR  UNMARKAI   BI   RU WRERR NALIZING D   C m {          HOME IHD  NGw ISHED0  RST $ ' 8 h         MOD$  PART8 T    3  B  v  X[ ED+        UP     m        ERR    SR  LAG           & * 5 > @ K K N m                !!  ""  ##GED $$ S+%% >&& F '' e(( m)) ** ++ ,,  --  .. 2.// 00TRUNC 11 G 22 K 33OATING 44  55  66 e77 r88  99  :: ;; << == >> ??  @@  AA  BB  CC  DD  EE  FF  GG  HH  II  JJ  KK  LL  MM  NN  OONOTGEN PPOVEMAT QQUNDMAT RRVNORCV SS WTT UU TDENORMAL8VV IV WW _F XXINE YY _F ZZ V [[ _F \\OVF ]] _F ^^PNTSYNX __  ``TRNeaaUND bb  cc _F ddUID eeNNORCV ffOTGEN gg SH hh _INTERVALpiiMASK jj  kkTERR ll NA mm  nn D ooFIL ppJFIL qq F rr  ss  tt M uuOCUSvvLDER!ww ;xx ` yy S!zz  {{LOW|| l}}  ~~ ED  @ A B E G W n  ING    8  L  Z n  q |  S*  /  j   NT OTNOTEP  y        S3  g   P  R                                                                                          ! ! ! # # $ $  $ % & & & ' ' ' ( ) ) ) * + + - - .  / / 0 1 2 2   3   3   4   5   6  6 6 6 7 7 8  9 9 9 :  < < = = >  ? @ @   @ !! @ "" @## A$$ A%% A&& B'' B(( C)) C** C++ C,, D-- D.. D// E00 E 11 E22 E33 E44 F55 F66 F77 G 88 G99 G:: H;; H<< I== J>> L?? N@@ N AA NBB NCC ODD O EE QFF QGG RHH RII RJJ SKK SLL SMM S NN U OO UPP UQQ VRR VSS VTT V UU VVV VWW WXX WYY WZZ X[[ Y\\ Y]] Y^^ Z__ Z`` Zaa Zbb [cc [dd [ee [ff \gg ]hh ] ii ]jj ^kk ^ll ^mm ^nn _oo `pp `qq brr bss btt cuu c vv c ww cxx dyy dzz e{{ f|| f}} g~~ g g h  h i i  j j j k l m o o q q s  t t u u v v w w w  w x x  y z z z {  { | | | | | } } ~ ~ ~                                                                                                                                                !! "" ## $$ %% && ''  (( )) ** ++ ,, -- ..  // 00 11 22 33 44 55 66 77 88 99  :: ;; << == >> ?? @@ AA  BB CC DD EE  FF GG HH II JJ KK  LL MM NN  OO PP QQ RR SS TT  UU VV WW XX YY  ZZ  [[ \\ ]] ^^  __ `` aa bb  cc dd  ee  ff  gg  hh ii jj kk ll mm  nn  oo pp qq  rr ss tt  uu vv  ww xx yy zz {{ || }} ~~                                                                                                                      CE D    " H T   DES#ERROR XIT RCF$UPG%_COMMIT  XTIBLY EIGN K U a  i        GET  K M  W  Y q r s z  {        AL             T                   ! " # + ,   -!! -"" .## /$$ 0%% 1&& 2'' 2(( 3)) 4** 5++ ;,, @-- C.. D// D 00 F11 G22 G33 H44 H55 I 66 I77 K88 K99 N:: O;; P<< Q== R >> V ?? _@@ aAA f BB nCC nDD qEE tFF uGG yHH ~II JJ KK LL MM NN OO PP  QQ RR SS  TT UU VV WW  XX YY ZZ [[ \\ ]] ^^  __ `` aa bb cc dd ee ff gg hh  ii  jj kk ll mm nn oo pp qq rr ss tt  uu vv  ww xx DS yyERRORzzINFO{{TED"|| .}} 1 ~~  RING        WARN ED  "  APP  S_ABORT WARDd      EDXING LOOP UND                                     ! , - 2 2  3 4  4  ; ; <  =  > > >  A A B B C D D J L L P Q S U V W X \ ] ^ a b c f f g g h h  h i i  k o o p q q q r t u v x x | }                                                                 !! "" ## $$ %% && '' (( )) **  ++ ,, -- .. // 00 11 22 33 44 55 66 77 88 99 :: ;; << == >> ?? @@  AA BB CC DD EE  FF GG  HH II JJ KK  LL MM NN OO PP QQ RR SS TT UU VV WW XX YY ZZ [[ \\ ]] ^^ __ `` aa bb cc dd ee ff gg PART_SECTN hh LA4ii NOTFOUND jj RAGMENTED, kk 2ll Mmm ME& nn oo pp Sqq  rrCPWDERR ss EEtt uu  vv  ww ! xx % yy , zz :{{ U|| W}} y~~                  BADBUFF  DISK ING     MEM     PAGREF! QUEUEw  SPADRIFT VM" RANGE# SIZE$ WSLE X% MPTRMOD&  OM                         $ & '  ' (  ) )  )  *  . / /  0 0  0 3 4 4 5 5 : : : ; < @ B C D I K K  M M M M N D q FROMQ T T T U U V V  W  X  Y  Z  [ [ [ ^ ` g h i i k  m m n p q q s s t  t!! u"" {## {$$ |%% | && }'' ~(( )) ** ++ ,,  --  ..  // 00 11 22 33 44 55 66 77 88  99 :: ;; << == >> ?? @@ AA BB CC  DD EE FF GG HH II JJ KK LL  MM NN OO PP QQ  RR SS  TT UU VV WW XX YY ZZ [[ \\ ]] ^^ __  ``  aa bb cc dd ee ff gg hh ii jj  kk ll mm  nn oo pp l mm  nn oo pp qq rr ss tt uu vv ww xx yy zzEQCHK{{OPEN ||PEC>}} d~~                   TRUCT    TOOBIG YPESF G_ABSENT EMPTY XISTS NAMEqFAIMAT  IDORWARD  L      ED IM  NG M   MARKAI  BI  RU ODIFD NAMERRVERRODIRPOST  PFTACC  I BACK  I CNTG DEL INS EXP   FND INS PUR OPNERRPURGED RDERREMOVED  QD STRUNSTER  OOLON   RNERR  UNMARKAI   BI   RU WRERR NALIZING D   C m {          HOME IHD  NGw ISHED0  RST $ ' 8 h         MOD$  PART8 T    3  B  v  X[ ED+        UP     m        ERR    SR  LAG           & * 5 > @ K K N m                !!  ""  ##GED $$ S+%% >&& F '' e(( m)) ** ++ ,,  --  .. 2.// 00TRUNC 11 G 22 K 33OATING 44  55  66 e77 r88  99  :: ;; << == >> ??  @@  AA  BB  CC  DD  EE  FF  GG  HH  II  JJ  KK  LL  MM  NN  OONOTGEN PPOVEMAT QQUNDMAT RRVNORCV SS WTT UU TDENORMAL8VV IV WW _F XXINE YY _F ZZ V [[ _F \\OVF ]] _F ^^PNTSYNX __  ``TRNeaaUND bb  cc _F ddUID eeNNORCV ffOTGEN gg SH hh _INTERVALpiiMASK jj  kkTERR ll NA mm  nn D ooFIL ppJFIL qq F rr  ss  tt M uuOCUSvvLDER!ww ;xx ` yy S!zz  {{LOW|| l}}  ~~ ED  @ A B E G W n  ING    8  L  Z n  q |  S*  /  j   NT OTNOTEP  y        S3  g   P  R                                                                                          ! ! ! # # $ $  $ % & & & ' ' ' ( ) ) ) * + + - - .  / / 0 1 2 2   3   3   4   5   6  6 6 6 7 7 8  9 9 9 :  < < = = >  ? @ @   @ !! @ "" @## A$$ A%% A&& B'' B(( C)) C** C++ C,, D-- D.. D// E00 E 11 E22 E33 E44 F55 F66 F77 G 88 G99 G:: H;; H<< I== J>> L?? N@@ N AA NBB NCC ODD O EE QFF QGG RHH RII RJJ SKK SLL SMM S NN U OO UPP UQQ VRR VSS VTT V UU VVV VWW WXX WYY WZZ X[[ Y\\ Y]] Y^^ Z__ Z`` Zaa Zbb [cc [dd [ee [ff \gg ]hh ] ii ]jj ^kk ^ll ^mm ^nn _oo `pp `qq brr bss btt cuu c vv c ww cxx dyy dzz e{{ f|| f}} g~~ g g h  h i i  j j j k l m o o q q s  t t u u v v w w w  w x x  y z z z {  { | | | | | } } ~ ~ ~                                                                                                                                                !! "" ## $$ %% && ''  (( )) ** ++ ,, -- ..  // 00 11 22 33 44 55 66 77 88 99  :: ;; << == >> ?? @@ AA  BB CC DD EE  FF GG HH II JJ KK  LL MM NN  OO PP QQ RR SS TT  UU VV WW XX YY  ZZ  [[ \\ ]] ^^  __ `` aa bb  cc dd  ee  ff  gg  hh ii jj kk ll mm  nn  oo pp qq  rr ss tt  uu vv  ww xx yy zz {{ || }} ~~                                                                                                                      CE D    " H T   DES#ERROR XIT RCF$UPG%_COMMIT  XTIBLY EIGN K U a  i        GET  K M  W  Y q r s z  {        AL             T                   ! " # + ,   -!! -"" .## /$$ 0%% 1&& 2'' 2(( 3)) 4** 5++ ;,, @-- C.. D// D 00 F11 G22 G33 H44 H55 I 66 I77 K88 K99 N:: O;; P<< Q== R >> V ?? _@@ aAA f BB nCC nDD qEE tFF uGG yHH ~II JJ KK LL MM NN OO PP  QQ RR SS  TT UU VV WW  XX YY ZZ [[ \\ ]] ^^  __ `` aa bb cc dd ee ff gg hh  ii  jj kk ll mm nn oo pp qq rr ss tt  uu vv  ww xx DS yyERRORzzINFO{{TED"|| .}} 1 ~~  RING        WARN ED  "  APP  S_ABORT WARDd      EDXING LOOP UND                                     ! , - 2 2  3 4  4  ; ; <  =  > > >  A A B B C D D J L L P Q S U V W X \ ] ^ a b c f f g g h h  h i i  k o o p q q q r t u v x x | }                                                                 !! "" ## $$ %% && '' (( )) **  ++ ,, -- .. // 00 11 22 33 44 55 66 77 88 99 :: ;; << == >> ?? @@  AA BB CC DD EE  FF GG  HH II JJ KK  LL MM NN OO PP QQ RR SS TT UU VV WW XX YY ZZ [[ \\ ]] ^^ __ `` aa bb cc dd ee ff gg PART_SECTN hh LA4ii NOTFOUND jj RAGMENTED, kk 2ll Mmm ME& nn oo pp Sqq  rrCPWDERR ss EEtt uu  vv  ww ! xx % yy , zz :{{ U|| W}} y~~                  BADBUFF  DISK ING     MEM     PAGREF! QUEUEw  SPADRIFT VM" RANGE# SIZE$ WSLE X% MPTRMOD&  OM                         $ & '  ' (  ) )  )  *  . / /  0 0  0 3 4 4 5 5 : : : ; < @ B C D I K K  M M M M N }I  FROMBUILTIN'  LINE(   PROCLINE)  ZEN*   U ZNCTX*   SZ+  TLIOERR,   M-   UL.   L       #  .   ?  G   \  \  ]   `   k  n  r   t  u  w  w  {       !!  ""  ##  $$  %%   &&  ''  ((   ))  **  ++  ,, NCTION--   ..  //  00  11  ,22  / 33  644  A55  B66  C77  C88  D99  H::  L;;  Q<<  S==  W>>  X??  [@@  [AA  `BB  hCC  sDD  tEE  vFF  wGG  HH  II  JJ  KK  LL  MM  NN  OO  PP  QQ  RR   SS   TT  UU   VV   WW  ING9 XX NOTSUP/ YY RTHER ZZ  "[[  \\  SEZ ]] TBAKDAT0 ^^ CREDAT1 __ REVDAT2 `` URE0 aa  1 bb  2 cc  6dd  WF3 ee  _FLOATING ff   gg   hh   ii   jj   kk   ll   mm GALAXY nn RBAGEb oo TEWAYpp  qq  rr  ss  tt  uu  vv  ww  xx HERyy  zz  BC4 {{  L4||  }} NDF5 ~~ OTCRE6  ONLY7  PAGES1 SZRO8  SECMAP9   _MISMATCH@ LOWNER:  WARN;  SLXERR<   CM $SETUP ABORT SRV$DIR _SERVER  T REV ENERATEO   D       "   =   >   B   C  C   ]                       _PASSWORD ING/  4           ON  @   n         IC?   F    R=   >  MINPWD   US1@  TRAPA  WRNB   C  _MAX?   TH   M     BOOTERR: CHND   E  DVIF   G  ERRH  JPII   J  ERRK  LOCK MEML   SGM  PTIERRN  TINGD   E   F         VMO   FCP  VSADDERQ  DIVERR  MLTERS  SBTERT  VADDERU  DIVERV  MLTERW  SBTERX  IVEN?  P              ING LOBAL  .  3  4  4   5   6   7   8   :   ;   ;   <   @  M  N  Y   Z   \   ]   `   d  j   o  {   |   ~                                                  ENTRYY  LABMUSZ  OESS ING          NE;  <            OD} !!  ~ ""   ##  $$  %%  &&  ''  (( SUB[ ))  v**  ++ MAX[ ,,  TO--  PGNULPGFL\ ..  RELOSHORTu//  T00  11  22 FULL] 33 NOMAP44 RANT^ 55  66  ED77  _ 88  d99  ::  ;;  RR^ << MSG_ == ULARITY>> PHIC?? FAIL@@ EATERAA  BB   CC  !DD  1EE  MFF  NGG  ^HH  aII  a JJ  eKK  mLL  mMM  sNN  OO  PP  QQ  RR  SS  TT OUPUU  VV  WW  %XX  +YY  >ZZ  ?[[  A\\  S]]  c^^  __  ``  aa  bb  cc  dd  ee _NAME+ff PMISgg NAMhh TOOLNGii  SDjj  a kk  b ll  c mm  nn  oo FULL` pp TYPa qq  b rr  c ss MATCH tt  T uu UESSuvv  EDww IDE\xx  yy ONLYzz  _FLOATINGQ {{  R ||  S }}  T ~~  U   V   W   X  HAD  p  x      IL    LFK  Td             EDe    ING> NDLE9  A  B  i            R.   /   :  =   T  a  n          S ING   Gf   UPf      RDWARE          S                                                                                  !  #  #  #  $  '  '  '   '   *  *  +   ,  .  /  4  5   5   6   7  :  ;  <  <   =  >  >  >  >  ?  ?  ?  A  B  D  D   D   D  E   G  G  H  H  H  I  I  I   L  O   Q  S   S  T  T    V     W    Z    Z    Z  [  [  \   \  ]  ]  ^  ^  _  _  a  a  b  b  c  c  c   c    d!!  d""  e##  e $$  e%%  f&&  f ''  g((  i))  j**  j++  k,,  n--  n..  o//  p00  q11  r22  r33  s44  t55  u66  w77  x88  x99  }::  };;  <<   ==  >>  ??   @@  AA  BB   CC  DD  EE  FF  GG  HH   II   JJ   KK  LL   MM  NN  OO  PP  QQ  RR  SS   TT  UU  VV   WW   XX  YY  ZZ  [[   \\  ]]  ^^  __  ``  aa  bb  cc  dd  ee  ff   gg  hh  ii  jj   kk  ll  mm  nn  oo   pp  qq  rr  ss  tt   uu   vv  ww  xx  yy  zz   {{   ||  }}  ~~                                                                                                        LINK  VE          $  (  +  ,  -   /   1  8  9  :   ;  <  K  L  V   a  b   e  k  m  z  {                            SUBKEYS BMM                      ALREADYON  BADPOLSPEC ENABLED  NOTENABLED READg  WRITEh  DRBLKi  CRCj  ERRSk  NOTMAPl  RESm  TRUNCn   _NOT_VALID EAD COPIEDo   ER                              "  $  +   1  1  2  6     ;     <    <     =    >  ?  B   C  C  F  J   N  P  S  V  V  [  [  b  c  d  d  e    g!!  i ""  j ##  k $$  l %%  m &&  n''  n((  n ))  o**  o++  o ,,  p --  q..  q //  r00  r 11  s22  t33  u44  v55  w66  w77  x88  y99  z::  z;;  {<<  |==  |>>  }??  ~@@  AA  BB  CC  DD  EE  FF  GG  HH  II  JJ  KK  LL  MM  NN  OO   PP  QQ   RR  SS  TT  UU   VV   WW  XX  YY  ZZ  [[  \\   ]]  ^^  __  ``  aa  bb  cc  dd  ee  ff   gg  hh  ii  jj ERRq kk FULLr ll  Smm  nn _DELp oo  RESIDENT?pp RTBEATqq  rr  ss  tt  uu  vv IGHTww  LDxx  Pyy  @zz  B{{  B||  H}}  s ~~  t   u   v   w   x                 ERRw   x  RALD  E           X  $  A  I  K  M  M  a                ADECIMAL                     =  >  ?  V  h  i  j  p               _NUMBERJ  L  IBy   ERz  NATINGy   z   LK DDEN{    ERARCHY    Fm  |   ~         ENTRIES|   WRITTEN}   Y~   WRITTEN   GH            ERX  o          VER     NT            RTN         SDELETED  TERR  ORY  g               OLD ING   MBLKBAD  CHK   E  3  8  D  E  R  g   h   w  x  x                         BLOCK   DY  }            STB    o           PARITH   C   RDREF&  SC   Z?    UB                  !!  ""  ##  $$ _OK%%  &&  GEZ'' WRPB((  A))   ** _NF ++ SUSPECTA,, _TYPEq-- I64... A64`//  C 00  L 11 MCNFUSD 22  N 33   44  BF 55  K 66  O 77 CBM88   99  ::  ;;  E<<  == IOERROR>>  ON??   @@ CLUDAT AA  NAMERDERR BB PFNDAT CC PAGELOC DD VNOTFNDfEE  DBFF  D GG ENTHH  8II  ZJJ  ~ KK   LL   MM   NN   OO   PP   QQ ICALRR  SS  TT   LYUU  FICATION5VV  BWW  jXX  YY  ZZ  [[  \\  ]]  ^^   ED7__  ``   Raa  bb  cc  %dd  2ee  Off  Rgg  ]hh  ^ ii  _ jj  dkk  jll  kmm  nnn  ooo  ppp  qqq  xrr  yss  ztt  {uu  } vv  ww  xx  yy   zz  {{  ||  }}  ~~                            S  TYZ  SZ  LE     HEADER_BUSY   MISMATCH      CH   NOTADDED OFFSET UTRNG   R   X  CONCAT   FILEFULL  HDRBAD  MAPERR  SEARCH  _LIM   _NOT_STRING   FA  DIRSYNX      EXPRNABS      F   I   L  EVLXCED     NOTF  REPAGCNT   T   GCNOTDONE   NCLIFLAG  FIL  ORED                   !  #  $   &  /  7  9  ?  A   F  G  G  H  J  N   V  \  `  g  l   n   }  ~                                                                                              _DIRE  VERS  ING     :  ;  <  =  >               POOL    QUAL     SIZEQUAL`    IFu    v       LC   E  LABSADR  PSCH LGMOD SEL NSIBS  RGDESC     SCARG     BATFNC  LKNUM  RDEST     UFOBJB CDTST   HR      !! NTRFUNC ""  OMPONENT ## NDIT $$ REOPT %%  TL && DBGETIR '' ESQUE (( TYP)) FLTARG **   ++ EFC ,, GAL --  ..   //   00   11   22   33   44   55   66   77   88   99   ::   ;;   <<   ==   >>   ??   @@   AA   BB  CC  DD   EE   FF  GG   HH   II   JJ  KK   LL   MM  ! NN  "OO  " PP  #QQ  # RR  $ SS  $TT  ' UU  ) VV  * WW  , XX  ,YY  ,ZZ  - [[  -\\  . ]]  / ^^  0 __  1 ``  6aa  7bb  ? cc  ?dd  @ee  Aff  Agg  Bhh  Cii  Djj  Gkk  Sll  a mm  a nn  b oo  cpp  c qq  frr  iss  qtt  ruu  svv  tww  xx  yy   zz   {{  ||  }}  ~~                                                                                                                                                    IxI ILLEGALI  I I  I  I  I  I  I   I   I   I   I  I  I I  I  I I I I  I  I  I  I I I I I w  w  {       !!  ""  ##  $$  %%   &&  ''  ((   ))  **  ++  ,, NCTION--   ..  //  00  11  ,22  / 33  644  A55  B66  C77  C88  D99  H::  L;;  Q<<  S==  W>>  X??  [@@  [AA  `BB  hCC  sDD  tEE  vFF  wGG  HH  II  JJ  KK  LL  MM  NN  OO  PP  QQ  RR   SS   TT  UU   VV   WW  ING9 XX NOTSUP/ YY RTHER ZZ  "[[  \\  SEZ ]] TBAKDAT0 ^^ CREDAT1 __ REVDAT2 `` URE0 aa  1 bb  2 cc  6dd  WF3 ee  _FLOATING ff   gg   hh   ii   jj   kk   ll   mm GALAXY nn RBAGEb oo TEWAYpp  qq  rr  ss  tt  uu  vv  ww  xx HERyy  zz  BC4 {{  L4||  }} NDF5 ~~ OTCRE6  ONLY7  PAGES1 SZRO8  SECMAP9   _MISMATCH@ LOWNER:  WARN;  SLXERR<   CM $SETUP ABORT SRV$DIR _SERVER  T REV ENERATEO   D       "   =   >   B   C  C   ]                       _PASSWORD ING/  4           ON  @   n         IC?   F    R=   >  MINPWD   US1@  TRAPA  WRNB   C  _MAX?   TH   M     BOOTERR: CHND   E  DVIF   G  ERRH  JPII   J  ERRK  LOCK MEML   SGM  PTIERRN  TINGD   E   F         VMO   FCP  VSADDERQ  DIVERR  MLTERS  SBTERT  VADDERU  DIVERV  MLTERW  SBTERX  IVEN?  P              ING LOBAL  .  3  4  4   5   6   7   8   :   ;   ;   <   @  M  N  Y   Z   \   ]   `   d  j   o  {   |   ~                                                  ENTRYY  LABMUSZ  OESS ING          NE;  <            OD} !!  ~ ""   ##  $$  %%  &&  ''  (( SUB[ ))  v**  ++ MAX[ ,,  TO--  PGNULPGFL\ ..  RELOSHORTu//  T00  11  22 FULL] 33 NOMAP44 RANT^ 55  66  ED77  _ 88  d99  ::  ;;  RR^ << MSG_ == ULARITY>> PHIC?? FAIL@@ EATERAA  BB   CC  !DD  1EE  MFF  NGG  ^HH  aII  a JJ  eKK  mLL  mMM  sNN  OO  PP  QQ  RR  SS  TT OUPUU  VV  WW  %XX  +YY  >ZZ  ?[[  A\\  S]]  c^^  __  ``  aa  bb  cc  dd  ee _NAME+ff PMISgg NAMhh TOOLNGii  SDjj  a kk  b ll  c mm  nn  oo FULL` pp TYPa qq  b rr  c ss MATCH tt  T uu UESSuvv  EDww IDE\xx  yy ONLYzz  _FLOATINGQ {{  R ||  S }}  T ~~  U   V   W   X  HAD  p  x      IL    LFK  Td             EDe    ING> NDLE9  A  B  i            R.   /   :  =   T  a  n          S ING   Gf   UPf      RDWARE          S                                                                                  !  #  #  #  $  '  '  '   '   *  *  +   ,  .  /  4  5   5   6   7  :  ;  <  <   =  >  >  >  >  ?  ?  ?  A  B  D  D   D   D  E   G  G  H  H  H  I  I  I   L  O   Q  S   S  T  T    V     W    Z    Z    Z  [  [  \   \  ]  ]  ^  ^  _  _  a  a  b  b  c  c  c   c    d!!  d""  e##  e $$  e%%  f&&  f ''  g((  i))  j**  j++  k,,  n--  n..  o//  p00  q11  r22  r33  s44  t55  u66  w77  x88  x99  }::  };;  <<   ==  >>  ??   @@  AA  BB   CC  DD  EE  FF  GG  HH   II   JJ   KK  LL   MM  NN  OO  PP  QQ  RR  SS   TT  UU  VV   WW   XX  YY  ZZ  [[   \\  ]]  ^^  __  ``  aa  bb  cc  dd  ee  ff   gg  hh  ii  jj   kk  ll  mm  nn  oo   pp  qq  rr  ss  tt   uu   vv  ww  xx  yy  zz   {{   ||  }}  ~~                                                                                                        LINK  VE          $  (  +  ,  -   /   1  8  9  :   ;  <  K  L  V   a  b   e  k  m  z  {                            SUBKEYS BMM                      ALREADYON  BADPOLSPEC ENABLED  NOTENABLED READg  WRITEh  DRBLKi  CRCj  ERRSk  NOTMAPl  RESm  TRUNCn   _NOT_VALID EAD COPIEDo   ER                              "  $  +   1  1  2  6     ;     <    <     =    >  ?  B   C  C  F  J   N  P  S  V  V  [  [  b  c  d  d  e    g!!  i ""  j ##  k $$  l %%  m &&  n''  n((  n ))  o**  o++  o ,,  p --  q..  q //  r00  r 11  s22  t33  u44  v55  w66  w77  x88  y99  z::  z;;  {<<  |==  |>>  }??  ~@@  AA  BB  CC  DD  EE  FF  GG  HH  II  JJ  KK  LL  MM  NN  OO   PP  QQ   RR  SS  TT  UU   VV   WW  XX  YY  ZZ  [[  \\   ]]  ^^  __  ``  aa  bb  cc  dd  ee  ff   gg  hh  ii  jj ERRq kk FULLr ll  Smm  nn _DELp oo  RESIDENT?pp RTBEATqq  rr  ss  tt  uu  vv IGHTww  LDxx  Pyy  @zz  B{{  B||  H}}  s ~~  t   u   v   w   x                 ERRw   x  RALD  E           X  $  A  I  K  M  M  a                ADECIMAL                     =  >  ?  V  h  i  j  p               _NUMBERJ  L  IBy   ERz  NATINGy   z   LK DDEN{    ERARCHY    Fm  |   ~         ENTRIES|   WRITTEN}   Y~   WRITTEN   GH            ERX  o          VER     NT            RTN         SDELETED  TERR  ORY  g               OLD ING   MBLKBAD  CHK   E  3  8  D  E  R  g   h   w  x  x                         BLOCK   DY  }            STB    o           PARITH   C   RDREF&  SC   Z?    UB                  !!  ""  ##  $$ _OK%%  &&  GEZ'' WRPB((  A))   ** _NF ++ SUSPECTA,, _TYPEq-- I64... A64`//  C 00  L 11 MCNFUSD 22  N 33   44  BF 55  K 66  O 77 CBM88   99  ::  ;;  E<<  == IOERROR>>  ON??   @@ CLUDAT AA  NAMERDERR BB PFNDAT CC PAGELOC DD VNOTFNDfEE  DBFF  D GG ENTHH  8II  ZJJ  ~ KK   LL   MM   NN   OO   PP   QQ ICALRR  SS  TT   LYUU  FICATION5VV  BWW  jXX  YY  ZZ  [[  \\  ]]  ^^   ED7__  ``   Raa  bb  cc  %dd  2ee  Off  Rgg  ]hh  ^ ii  _ jj  dkk  jll  kmm  nnn  ooo  ppp  qqq  xrr  yss  ztt  {uu  } vv  ww  xx  yy   zz  {{  ||  }}  ~~                            S  TYZ  SZ  LE     HEADER_BUSY   MISMATCH      CH   NOTADDED OFFSET UTRNG   R   X  CONCAT   FILEFULL  HDRBAD  MAPERR  SEARCH  _LIM   _NOT_STRING   FA  DIRSYNX      EXPRNABS      F   I   L  EVLXCED     NOTF  REPAGCNT   T   GCNOTDONE   NCLIFLAG  FIL  ORED                   !  #  $   &  /  7  9  ?  A   F  G  G  H  J  N   V  \  `  g  l   n   }  ~                                                                                              _DIRE  VERS  ING     :  ;  <  =  >               POOL    QUAL     SIZEQUAL`    IFu    v       LC   E  LABSADR  PSCH LGMOD SEL NSIBS  RGDESC     SCARG     BATFNC  LKNUM  RDEST     UFOBJB CDTST   HR      !! NTRFUNC ""  OMPONENT ## NDIT $$ REOPT %%  TL && DBGETIR '' ESQUE (( TYP)) FLTARG **   ++ EFC ,, GAL --  ..   //   00   11   22   33   44   55   66   77   88   99   ::   ;;   <<   ==   >>   ??   @@   AA   BB  CC  DD   EE   FF  GG   HH   II   JJ  KK   LL   MM  ! NN  "OO  " PP  #QQ  # RR  $ SS  $TT  ' UU  ) VV  * WW  , XX  ,YY  ,ZZ  - [[  -\\  . ]]  / ^^  0 __  1 ``  6aa  7bb  ? cc  ?dd  @ee  Aff  Agg  Bhh  Cii  Djj  Gkk  Sll  a mm  a nn  b oo  cpp  c qq  frr  iss  qtt  ruu  svv  tww  xx  yy   zz   {{  ||  }}  ~~                                                                                                                                                    } ILLEGALACCMTYPE _SHADOW VTNUM XPR   FILEVER MLCNT      T  ORMAT  STCHR  UNC IDXNUM FCOND   NDXREG   ISTR ROU OFUNC KEYLVL MACARGN   NAM   SKBIT   ODE   IFIERC NAM !!TCOPY ""NAMELEN##  $$ OP %%DEF &&  VL ''  (( T ))  **UTROU ++PAGCNT ,,TAS --ERNAM ..OLICY //RIPOL 00SCIDX[11LEN 22QUAL 33VAL 44RECLEN 55  66  77TYP 88  99  ::GHERE ;;  <<NUM ==  >>LADR ??PAGD@@QUEST AATEXC BBQST CCSBCAL DDEXC EE DM FFSAVESET GGECNUMHHRELIILECT JJ F KKQOP LL R MMVERITY NNHROPR OOXPR PPLOTQQTATINI! RRRCLA" SSPOS# TTSPE$ UUYMLEN% VV & WW ' XX SRECMODE( YYTIR) ZZ YP* [[VAL+ \\ , ]] - ^^ EC/ __ OP0 `` PS1 aa_ARG bbKEY ccVALUE. ddMAGEee  ff  gg hh  ii jj kk ll mm nn oo pp qq rr ss tt uu vv  ww xx  yy  zz !{{ "|| %}} &~~ ' ' ) ) * , - / 0 1 2  3  5 5  5 6 6  7  7  7  7 8  8 9  9 :  : ;  ;  <  < = =  = = > >  > ?  ? @ @  @ A A  A B B  C  D  E E E E F G G H H I J L N N  O Q R R S T T V  V V W W X X [ b g i  m m  n s v y  z { | } ~                                                                                              !! "" ## $$ %% && '' (( )) ** ++ ,,  -- .. // 00FAIL11 NF2 22LEN3 33 NF4 44 S55 66 -77 688 8 99 A:: J;; \<< ]== m>> |?? }@@ AA BB CC DD  EE FF GG HH II JJ _NOT_FOUND5 KK SK LL  MMGADDED6 NNBASED7 OO DMP$READALLPP QQ_RIGHTSjRR kSSUPINV8 TTFILGON9 UUSPE: VVHDR; WWINV< XXNAME= YYOTFND> ZZRECSIZ? [[MOVED@ \\ Q!]] A ^^TRACEDC __VERNEQ`` XCD aa_SIZB bbMEDIATE cc  LY_dd ee PERSONATEff LEMENTED7gg =hh Mii Njj Okk Pll Qmm Rnn oo pp qq rr ssICITLY"tt #uu $vv %wwORTxx EDyyROPERBzz a{{ || }}  LY~~ " P j        VEm XE  NACCESSIBLE       TIVE  6 O     DEQUATE PPROPRIATEF  N   BOUNDUILTINH CBADDIRI DEXJ CTXTK DATTIML ELERRM  TEN VLISO ISABLEDP STQUEQ UMPFORMR ENTERRS  RYT FILATRU SPEV ORMPARW JNLFILX VERY KEYDEFWDCOMZ LUDE  [  \  ]  ^    SING MEMNAM^ OMINGP  PACP_  RG`  Ta  b  c  IBLE      J  P R  Y  \ ] _  `  a  b  c  d  e  g  h  |  }           STATEP _HDR PARDRVACPd EXIe  Lf ETE      - @ K  L  P S T  U  c d g  z   SHRh NFORi ISDj OWNERk PAGROTl QUALSm OTAn SDEVo  ETp  HRq ISTENCY  & >   ?   p   q   z              T     C E Q Q  W  Z    Z!! f"" i ## j $$ k %% l && n '' o (( p )) q ** r ++ s,, t -- u .. w // |00 11 22 33 44  55  66  77 88 99 ::  ;; << == >> ??  @@ AA BB CC DD EETATE%FF &GG r HH s IIRUCTt JJWRITEu KKRRECTLL  MM >NN AOO P PP X QQ ZRR [SS ^TT _UU jVV kWW y XX zYY {ZZ { [[ }\\ ~]] ~ ^^ __  `` aa bb cc dd ee ff gg  LY hh $ii Mjj Rkk Ull Zmm nn oo ppPTREFv qqQUETYPw rrOTAx ssREASE tt  DEuuDSYNvvMENTww v xx  ALV yy VNy zzSEGTRAz {{TCNT{ ||HAMEM| }} } ~~VAL~ OLLABEL DENTk l ATIONB  SPENDENT5 ; > X  $ %  0 4 5 6 M P S [ d f g h i j n o q r s t u v v  w w x y z { { | } ~                                                                         ED J j k y       RR  FT f ING OVFL TOSM YPE ICATED_   Sx  }  ING ORfRECTION W_OVR EXACT   FERDINITE PLOGhLATEF O    RMATION                 *   +  8 : ; C G  I  Q U ^ _ a e i k l o p r   u!! v"" w ##  $$ %% && '' (( )) ** ++ ,, -- .. //  ALh00 i11UTLOGi22HCHME 33 K 44ERITj55ANCEj66IBITED77  88  99 I ::  ;;ACC <<LRPRO ==ERR >> T-?? D@@ WAA yBB  CC DD EE FF GG HH II  JJ KKAPELLERR MM OR9NNFAIL OO UREPPIALQQ RR SSISEDTT ZATIONUU ! VV 9WW IXX QYY SZZ X[[ \\  ]]  ^^  __ `` aa bb cc dd  ee  ff gg  hh S]ii jj  E kk  ll mm nn  oo mpp qq rr ss tt uu  D vv #ww .xx P yy v zz {{ || }}  ~~   ING g {      LYdTEDn ING  ORS{ }OVRLYDmPRS  M ONOTGEN VNORCV PBUFOVR CONERR FNFLENERRSTRTRU TOOLON  UT              " # $ % % ' ( + ,  -  . 1 2 8 D K L M M M N O P Q R S S S U V b b  f h j l q t z {  { } } ~ ~                                                                                                                        !! "" ##  $$ERR %% _CANCELED &&ERR ''SKP ((_FILES ))  **QUIRE\++ Y{,, }-- SBUFSPACE ..CLIMEM //OLL 00NSPA11DFAIL 22 EFe33  44 RT55 66 u77  88  99 :: ED;;  << == >> ?? @@ RR AAING BBFAIL CC NL DD RG EE S FFBUFDP GGCDT HHONTIG II DIALSUPPORT'JJ (KKILLM LLLPGS MMMAPREG NN EM OO  PP QQP1POOL RR RM SSRAME TTEEREG UUPGS VVSPTS WWWSL XX _SHM_REG9YYKIPPED ZZLUN [[NFREPAG \\OTSUP ]]PDYN ^^OPRND __QUOCRE `` TA aaRES bbSWPFIL ccTALLdd 'ee Sff s gg hhABLEii TION/jj <kk =ll \mm hnn q oo  pp  qq rr ss tt uu EDvv ww -xx 7yy 7zz 8{{ 9|| A}} K~~ Z \ ] p |                    RR' ITEAD  IMAGE  RqUCTION  . 3 4 5 = D V d  j l q r s z {                 Sm  UFF ICIENT      ' ( .  . 1 9 = C L  N V W ] ^ _ ` e f y                                                                                                LY@MEM INFO  PAT    DL  VIRMEM                          64WAP ERR PGFIL  T  ACT\DATCOR ELPRC    IV !!EGER"" ## $$ ( %% ) && 2'' 6(( Y)) f** f++ v ,, -- ..  //  00 11 22  33 44 55 66 77  88  99 ::  ;; << ==  >>  ?? @@RITY AA RMBBACTiCC ION@DD vEE  VE]FF GG  HHCONNECT-IIERR JJFACE1KK eLL gMM hNN iOO PP  QQ RRINJ SSLOCK TT  UU VV  EDrWW XX YY ZZ [[ \\MEDIATE ]]NAL ^^  __ %`` &aa 'bb +cc ,dd 2ee @ff Fgg Ghh Hii Ijj Jkk fll hmm knn loo mpp qqq s rr |ss |tt  uu vv ww xx yy zz  {{  ||  }} ~~                                              ERROR    LYPRET ATION5 >  EDm  R       Rk  UPT    i INTERRUPT)  /  0 1 4 5 V `  {            IDXNUM FCOND   NDXREG   ISTR ROU OFUNC KEYLVL MACARGN   NAM   SKBIT   ODE   IFIERC NAM !!TCOPY ""NAMELEN##  $$ OP %%DEF &&  VL ''  (( T ))  **UTROU ++PAGCNT ,,TAS --ERNAM ..OLICY //RIPOL 00SCIDX[11LEN 22QUAL 33VAL 44RECLEN 55  66  77TYP 88  99  ::GHERE ;;  <<NUM ==  >>LADR ??PAGD@@QUEST AATEXC BBQST CCSBCAL DDEXC EE DM FFSAVESET GGECNUMHHRELIILECT JJ F KKQOP LL R MMVERITY NNHROPR OOXPR PPLOTQQTATINI! RRRCLA" SSPOS# TTSPE$ UUYMLEN% VV & WW ' XX SRECMODE( YYTIR) ZZ YP* [[VAL+ \\ , ]] - ^^ EC/ __ OP0 `` PS1 aa_ARG bbKEY ccVALUE. ddMAGEee  ff  gg hh  ii jj kk ll mm nn oo pp qq rr ss tt uu vv  ww xx  yy  zz !{{ "|| %}} &~~ ' ' ) ) * , - / 0 1 2  3  5 5  5 6 6  7  7  7  7 8  8 9  9 :  : ;  ;  <  < = =  = = > >  > ?  ? @ @  @ A A  A B B  C  D  E E E E F G G H H I J L N N  O Q R R S T T V  V V W W X X [ b g i  m m  n s v y  z { | } ~                                                                                              !! "" ## $$ %% && '' (( )) ** ++ ,,  -- .. // 00FAIL11 NF2 22LEN3 33 NF4 44 S55 66 -77 688 8 99 A:: J;; \<< ]== m>> |?? }@@ AA BB CC DD  EE FF GG HH II JJ _NOT_FOUND5 KK SK LL  MMGADDED6 NNBASED7 OO DMP$READALLPP QQ_RIGHTSjRR kSSUPINV8 TTFILGON9 UUSPE: VVHDR; WWINV< XXNAME= YYOTFND> ZZRECSIZ? [[MOVED@ \\ Q!]] A ^^TRACEDC __VERNEQ`` XCD aa_SIZB bbMEDIATE cc  LY_dd ee PERSONATEff LEMENTED7gg =hh Mii Njj Okk Pll Qmm Rnn oo pp qq rr ssICITLY"tt #uu $vv %wwORTxx EDyyROPERBzz a{{ || }}  LY~~ " P j        VEm XE  NACCESSIBLE       TIVE  6 O     DEQUATE PPROPRIATEF  N   BOUNDUILTINH CBADDIRI DEXJ CTXTK DATTIML ELERRM  TEN VLISO ISABLEDP STQUEQ UMPFORMR ENTERRS  RYT FILATRU SPEV ORMPARW JNLFILX VERY KEYDEFWDCOMZ LUDE  [  \  ]  ^    SING MEMNAM^ OMINGP  PACP_  RG`  Ta  b  c  IBLE      J  P R  Y  \ ] _  `  a  b  c  d  e  g  h  |  }           STATEP _HDR PARDRVACPd EXIe  Lf ETE      - @ K  L  P S T  U  c d g  z   SHRh NFORi ISDj OWNERk PAGROTl QUALSm OTAn SDEVo  ETp  HRq ISTENCY  & >   ?   p   q   z              T     C E Q Q  W  Z    Z!! f"" i ## j $$ k %% l && n '' o (( p )) q ** r ++ s,, t -- u .. w // |00 11 22 33 44  55  66  77 88 99 ::  ;; << == >> ??  @@ AA BB CC DD EETATE%FF &GG r HH s IIRUCTt JJWRITEu KKRRECTLL  MM >NN AOO P PP X QQ ZRR [SS ^TT _UU jVV kWW y XX zYY {ZZ { [[ }\\ ~]] ~ ^^ __  `` aa bb cc dd ee ff gg  LY hh $ii Mjj Rkk Ull Zmm nn oo ppPTREFv qqQUETYPw rrOTAx ssREASE tt  DEuuDSYNvvMENTww v xx  ALV yy VNy zzSEGTRAz {{TCNT{ ||HAMEM| }} } ~~VAL~ OLLABEL DENTk l ATIONB  SPENDENT5 ; > X  $ %  0 4 5 6 M P S [ d f g h i j n o q r s t u v v  w w x y z { { | } ~                                                                         ED J j k y       RR  FT f ING OVFL TOSM YPE ICATED_   Sx  }  ING ORfRECTION W_OVR EXACT   FERDINITE PLOGhLATEF O    RMATION                 *   +  8 : ; C G  I  Q U ^ _ a e i k l o p r   u!! v"" w ##  $$ %% && '' (( )) ** ++ ,, -- .. //  ALh00 i11UTLOGi22HCHME 33 K 44ERITj55ANCEj66IBITED77  88  99 I ::  ;;ACC <<LRPRO ==ERR >> T-?? D@@ WAA yBB  CC DD EE FF GG HH II  JJ KKAPELLERR MM OR9NNFAIL OO UREPPIALQQ RR SSISEDTT ZATIONUU ! VV 9WW IXX QYY SZZ X[[ \\  ]]  ^^  __ `` aa bb cc dd  ee  ff gg  hh S]ii jj  E kk  ll mm nn  oo mpp qq rr ss tt uu  D vv #ww .xx P yy v zz {{ || }}  ~~   ING g {      LYdTEDn ING  ORS{ }OVRLYDmPRS  M ONOTGEN VNORCV PBUFOVR CONERR FNFLENERRSTRTRU TOOLON  UT              " # $ % % ' ( + ,  -  . 1 2 8 D K L M M M N O P Q R S S S U V b b  f h j l q t z {  { } } ~ ~                                                                                                                        !! "" ##  $$ERR %% _CANCELED &&ERR ''SKP ((_FILES ))  **QUIRE\++ Y{,, }-- SBUFSPACE ..CLIMEM //OLL 00NSPA11DFAIL 22 EFe33  44 RT55 66 u77  88  99 :: ED;;  << == >> ?? @@ RR AAING BBFAIL CC NL DD RG EE S FFBUFDP GGCDT HHONTIG II DIALSUPPORT'JJ (KKILLM LLLPGS MMMAPREG NN EM OO  PP QQP1POOL RR RM SSRAME TTEEREG UUPGS VVSPTS WWWSL XX _SHM_REG9YYKIPPED ZZLUN [[NFREPAG \\OTSUP ]]PDYN ^^OPRND __QUOCRE `` TA aaRES bbSWPFIL ccTALLdd 'ee Sff s gg hhABLEii TION/jj <kk =ll \mm hnn q oo  pp  qq rr ss tt uu EDvv ww -xx 7yy 7zz 8{{ 9|| A}} K~~ Z \ ] p |                    RR' ITEAD  IMAGE  RqUCTION  . 3 4 5 = D V d  j l q r s z {                 Sm  UFF ICIENT      ' ( .  . 1 9 = C L  N V W ] ^ _ ` e f y                                                                                                LY@MEM INFO  PAT    DL  VIRMEM                          64WAP ERR PGFIL  T  ACT\DATCOR ELPRC    IV !!EGER"" ## $$ ( %% ) && 2'' 6(( Y)) f** f++ v ,, -- ..  //  00 11 22  33 44 55 66 77  88  99 ::  ;; << ==  >>  ?? @@RITY AA RMBBACTiCC ION@DD vEE  VE]FF GG  HHCONNECT-IIERR JJFACE1KK eLL gMM hNN iOO PP  QQ RRINJ SSLOCK TT  UU VV  EDrWW XX YY ZZ [[ \\MEDIATE ]]NAL ^^  __ %`` &aa 'bb +cc ,dd 2ee @ff Fgg Ghh Hii Ijj Jkk fll hmm knn loo mpp qqq s rr |ss |tt  uu vv ww xx yy zz  {{  ||  }} ~~                                              ERROR    LYPRET ATION5 >  EDm  R       Rk  UPT    }E INTERRUPTED  S  VAL HCHAR INVNODE  LOGERR   NODESPACE  NEXP   O     ! ) - 9 S T T    VF    _F  PATHSTKOV RNLERR    UDER!! "" ## $$ %%  S&&SION'' ((SET ))TKOV ** UN ++TERMIN ,,USE -- ..  //VACCESS 00  11REC 22DAP 33DINFl44 R55GGCTXm66TYPn77IJDEV 88JLNAM 99LID:: ;; << ==  >> ?? @@ AA BB CC DD EE FF GG HH II JJ KK LL MM NN OO PP  QQ  RR SS TT UU VV WW XX YY ZZ [[ \\ ]] ^^  __  ``  aa  bb  cc  dd  ee  ff  gg  hh  ii  jj  kk  ll  mm  nn  oo pp qq rr ss tt uu vv ww xx yy zz {{ || }} ~~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`` `aa `bb acc add aee bff b gg bhh bii bjj ckk cll cmm dnn doo dpp eqq err ess ett fuu gvv gww hxx h yy hzz i{{ i|| j}} j~~ k l l l l m m m m n n n n n o o o o o p p p  p p q q  q q r r r s s t t t t t u u v v w w w x x x y y y z z z z z z { {  { | | | } ~ ~ ~                                                                                                                    !! "" ##  $$ %% && '' (( ))  ** ++ ,, -- .. // 00 11 22 33 44 55 66 77 88 99 :: ;; << == >> ?? @@ AA BB CC DD EE FF GG HH II JJ KK LL MM NN OO PP QQ RR SS TT UU VV WW XX YY ZZ [[ \\ ]] ^^ __ `` aa bb cc dd ee ff gg hh ii jj kk ll mm nn oo pp qq rr ss tt uu vv ww xx yy zz {{ || }} ~~                                                                                                                CTX6DELETEPWD TERMNAME IME   LV7_DATE HWRPB _ID NAME PAR RSTATION TOKEN VERSION GN KEY3QUALRESP4PPNAM  RG         COUMATORDVALRDSCSNCODETTSIZ TRVALB2TENTFLDNODSYMACKLINKJLEOFSIZ   TR  TYP   KT   LK  HDRSIZETYPOCK RNCOD!TIMSP" UFDELETE#LENoSNAM$ODE% CACHEACTION LL&CFIL' HA( N) AM* + UM, R-   .!! /""SET0##DABS1$$JFIOD2%%LADSC3&& TY4''IFLAG5((SITM6)) NM7** MD8++ 9,, :-- ;..REQ// OL<00ARG=11MMAND22PID>33LIST?44TYPE@55NCHAR66 TA77PUIDB88REDTYP)99 TXC::TYPD;; VTE<<DATA== F>>TYPE?? IMG@@LENpAATIMBBDTMHCC EFIDDATTJEEINEKFFLIMLGG SCMHH VNII OJJICEPKK QLLTYPRMM  ESNNWBMVOOIALSTSPP RTQQS_IDURR OCqSS PTVTTINIWUUSTFLD(VVNOD)WWQUEXXXRECYYY ZZZTYDSC[[[ELEID\\\NAM]]]TYP^^^OBJSIZ$__RLEVT``TIMSP_aaUSRLENbbXCEPTN`ccHLISTadd PbeeTBACKcffFIDdggHDRehh FAOPARAMfii IDgjj LhkkEXTillORGjmmSPEknn loo mpp nqq orrLAG*ss SttOWCTRLuuTVALrvvUSHSPpwwNAMEIxxORNAMqyy rzz UMs{{UNCCODE|| ODs}} t~~ GBLSELDATAuOSUBv HANGASTINIT  P1 EADER_BUSYwOMBLKxIDXOPyFNESTz MAGEINDEX{GHDR|NPDMNtFIL} UT~ SERTuTERFACE SPOCODESIBLETEM CODE NMMCODv  LSTwSEQ8JNLFAC ILIDXLRLTYPOUDATAKBD_ID EYCHAR IDNAM  ETB_IDLDADRHDR=  F>NULL?PEPORTRENT SPINKPATHNKG\OCKID GFIL    INNAMVN1*MAPPINGXIDXLENEMQ SSODE SG822:BUFMLT;PRT<UNK=VIPW NAMBDSEWPWD  OD EUIDGULLCMDMBERCHIPRT>STROCATIONz { KE OBPELF& RZONNELF' R NDTION  SVALxUTDMNySPE VERQUOTARINI]PAGARGRAM   ETER+FILLEN MVAL SS_ID TH  ERMCONNFLOWQUOTASONA9 IDLACEPPCODEREFIXTNUM?VNAMTEFMT WD LEN QALPOSMANMSGNAMUAL VAL          ENAM   O  RANGE   ECFMTLENORDSIZTYPDSYN FGIDHLOPMDST5QHIPTYP QCODPARM  TYP!!UEST:"" FA## $$ M%% &&LNKG^''OUNDUP(( T)) ** W++ SP,, ID-- TA..UACE// ID00LIST11SCOCODz22TRAN{33RPOS44 ECDESCRIPTOR55OMAIN66POLICY 77MINI88MAX99QOP::IZE;; <<MBMSG==NTX>>PECIAL?? ED@@IDST+AA  1,BB  2-CC  3.DDRCFLD/EE SFFDVUGGTACKHHMATIINAMJJ EKKLEVELLLMNBRMM RNNDESOO PPLEV QQUCT RRSCOD|SSUBTYP TTYMNAM UUTYPE#VV SRECMODE WWTABXXSPECYYGCOD}ZZERTAB[[IME\\ ]]OKEN^^ __QEFMT``YPEaa bbUICcc dd ee ffSERgg hhNAMEiiSPECjjVALkkCLAUSEllNAME mm UEnn ECooIEWSP ppMSOSC!qqOI_ID"rrLFMT#ssROOTKEY tt WEAK_KEYuuIDARG$vv GETCLASS%ww _COMMANDxxGWNAMEyyNONAMEzzSIZE{{_BARRIER_WAITG ||USE }} OADDRESS'~~ NOTEXIST) P*REFIX+ SA7 t B ALLOC_CONCLO(LOAD_ PORT_BLOCK PC L  p q  TOOHIGH  RC, P> _      C  Q SACPYTRGT-MBR. D1 i  j  SK_MAXOFF/SIZ0VBN1 I2PROXYQUAL3SUE) D  $ 4 < C  INGV  TC5 D6 EM  # $ . 6 7 8 9 C M T  ] _ j m v w x { ~                LIST   NOTFOUND7 S    :   _RATION8 VE4MAGGCNT~NOTDEF9REMOVED: S 6 7      ELF9VACL;MODEIDDID<NODE= R>LOCLS?TIME@BAKADIOALKENTBNUMCUFLEND ECHANF RGNLSECHDEVNAMITYPEJTIMEKFNAMLGBLTYPMSDNAMNIDENTOJFATPILEQ  NLACER  RJRHDRS  KEYNAMT   WU  LISTKVOCKIDWGNAMXTABYVECZMODE[NODNAM\OPER]RDER^ P_FAIL_URE6INSTALL7JFILE`ORTJROTaECTbQLOCcUALd   e!!OTALf""REGFLGK## IDL$$PROTM%%MIDg&&NODEh'' Si((ECFLG))IDCTLj**SRQk++VRQSTl,,TSFLGm--YMBn..TIMEo// p00YPEq11VAFLGN22 LUr33ERBs44 WSETLISTt55 JBCERRORu66MIXUPv77CREATEDw88DEVFIDx99 ECy::FILEz;; IB<< MT== ND{>>LACP|??TIVE}@@DRV~AAFILEBBNOTAUTHCC DD EEOPENFFOPENGGPUTHHFAILII WRITEERRJJ SKK OBLL  MM NN OO  PP %QQ &RR 6 SS <TT @UU GVV I WW [XX ] YY ^ ZZ c [[ e \\ u]] v^^ v__ `` aa bb cc dd ee ff  gg hh ii jj kk ll mm nn oo pp qq rr ss tt  uu vv ww xx yy zz  {{ || }}ABORT~~CARDTLABORTDELETE FONOTEXECQUEDISENAREQUEUEE}EJOBSE  E KE E HN E INYE EDE  EAPP E R E  E  E E PEENINE E FHEURNALE E  E E E E E  E !E %E 'E ,E /E 4 E 5!!E =""E =##E >$$E >%%E P &&E P''E P((E Q))E Q**E R++E S,,E V--E W..E W//E X 00E X11E Y22E \33E ]44E `55E `66E a77E b88E e99E f::E g;;E t <<E w==E x>>E z??E |@@E }AAE ~BBE CCE DDE EEE FFE GGE HHE IIE JJE KKE LLE MME NNE OOE PPE QQE RRE SSE TTE UUE VVE WWE XXE YYE ZZE [[E \\E  ]]E ^^E __E ``E  aaE bbE ccE ddE eeE  ffE ggE hhE iiE jjE kkE llE mmE nnE ooE ppE qqE rrE ssE ttE  uuE  vvEBEGwwECLOSExxE ED(yyE )zzE *{{E +||E -}}E .~~E 0E 1E 2E 3E 5E 6E E  OFEING2E EE FE GE HE ME Y E {E E E E E E E E E E E E E  E  E  E  E  E  E  E  E  E E SE PITSTERREREADERRE NLBUFBEGENOTSAFEEOPENE ERRE SBE `E E E E E E E EHOMEEMODEXCERCHHOME_ENTRYE lE E USTIFIEDEVOLFIDE WRITEERRE KBDIN_USEE FEERNEL=E FE  E E E YE E E  E  E  E E E E E E E E E E E E E E %E .E /E 3E 7E ?E EE EE GE JE JE TE WE ^E _E h E nE o E p E tE { E  E  E  E  E E E E E E  E E E E E  E  E  E E E E E  E E E E E  E E   E   E   E   E   E E E E E E E E E E E E  E E E E E E E   E !!E ""E ##E $$E %%E &&E ''E ((E ))E **E ++E  ,,E  --E ..E  //E 00E 11E 22E 33E 44EALRINS55EMBINC66EBOARDH77E 88E 99ECHANGED::E NV;;EDEFPRO<<E ED==ELENERR>>E ??EOCKED@@E MAPNOTFNDAAE NAMEEXISTBBELNGCCEOTDEFDDEFNDEEE OUFFEVERGGEPADHHERERRIIE S JJE KKE LLE MME NNE OOE PPE QQE RRE SSE UPERSEDEDTTETRNERRUUEUNKNOWVVEWINVWWEORDXXE YYE 8ZZE 9[[E :\\E :]]E >^^E D__E E``E GaaE JbbE UccE UddE Z eeE `ffE `ggE dhhE kiiE mjjE nkkE qllE ummE wnnE xooE ~ppE  qqE  rrE ssE ttE uuE vvE wwE xxE yyE zzE {{E ||E }}E ~~E E E E E E EPARAME S/E_LENE FFE ITE E E E DE HE aE hE lE nE E E E E E E NMEOWN*E @ E WE  E  E E E E E E E  E RFE NLSTAKNVE SIE ZELABELE ,E :E ;E D E E E OE QE Z E cE jE yE zE |E }E ~E  E E E  E  E  E E  E E E E E E E E E E E E E E E E E E E E EDdE RRE S_E E E ESTACKOE CK; E NUE  E E E EGUAGEbE E E E  ERGE E E E 9E <E ] E dE dE E E E E E E E E E E E ECNTE E R E 1E E E E  E E STE  E E E 8E PE    E   E   EIPCF8  E Tj  E zE E E E E E E E EACPP E ZE d E E EENCYE E RE  E 8  E ^ !!E ""E STOPPING##E YM$$EUNCHW%%EWSON &&EBLNOTALLINPIP''E OVRWRITE((E NM))E N**E U++E W,,E ^--E ..E //E 00E 11ESIZE<22E R33E  44E $OUTPUT_HELP 55EFAIL66E X77ECKERR88EPAGFUL99ELCOMT::EGRP;;E SR<<E ==E >>EDBPRES??E E@@EX_LjAAE lBBEEADVCCE WDDE tEEE uFFE GGE ERHHE IIE JJEINGKKE RN&LLE eMME NNE STOOE !PPE EQQE RRE  SSEVING" TTE JUUE FTVVE ?WWE DXXE EYYE  ZZE [[EGAL\\E 5]]E 6^^E @__E f``E gaaE bbE ccE  ddE eeE ffE NggEGTHhhE  iiE  jjE kkE  llE  mmE  nnE ooE ppE qqE rrE ssE  ttE uuE &vvE ' wwE ,xxE 0yyE 1 zzE 2{{E 3 ||E 3}}E :~~E @E @E B E EE HE IE NE OE OE ^E fE hE nE oE oE oE pE qE tE v E }E ~E E E E E E E E E E E E E  E E E E E E E E  E E E E E E E  E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E  E  E EMUSONEENOTEQLE PWDSYNCHEVIOE _NOTBLKMULTOEPAGMULTE SSE E E E 'E 3E 4E 6E 7E 9E FE `E E E  E E ETTER7E ]E EVELE E  E  E  E  E E E E !E "E (E .E 3E 3E 6E 9E : E <E B E H E PE p E qE t E }E ~E E E   E   E   E    E    E  E E E E E  E  E E E E E E E  E E  E E  E   E S[ !!E ""E ##E $$E %%E X&&EICALA''E B((E C))E D**E E++E L,,E --E IB$FREE_VM ..ETPARSE//E 00EFAIL11EIND22E 33ENAMLNG44E 55EOTOPN66EOPN77ERARIAN.88E ES'99E /::E T;;E U<<E ==E >>E ??E Y@@E  AAE BBE CCE DDE EEE FFE GGE HHE IIE !JJE "KKE $LLE &MME (NNE )OOE * PPE ,QQE ,RRE -SSE .TTE /UUE 0VVE 0WWE 0XXE 3YYE 4ZZE 9[[E :\\E ;]]E =^^E A__E D``E GaaE HbbE HccE IddE LeeE c ffE k ggE l hhE tiiE {jjE | kkE |llE }mmE  nnE  ooE  ppE  qqE  rrE  ssE  ttE  uuE  vvE  wwE  xxE yyE zzE  {{E  ||E }}E  ~~E  E  E  E E E E E  E E E E  E E E E  E E E E  E E  E E  E  E  E  E E E E E E E ECENSEE E E E E , E 4 E >E ?E OE [E bE tE vE E E E E E  E E E  E E E E E E E E E E E DF E S&E iE E E EINGEIGNEMIT E E E ( E +E 2 E 4E ; E ? E AE EE T E [ E E  E E E  E E  E E E E  E  E E  E E E E  E E E ECHANGEDEE ED(E 3 E  E S, E oE E E NEE  E E E E E  E  E E E E E E  E E E E  E "E #E #E %  E &  E &  E '  E '  E 'E ( E ) E -E 0E 0E 1E 5E 9E AE HE JE KE SE TE UE UE VE Y  E Z!!E Z""E [##E [$$E \%%E \&&E ]''E ^((E _))E `**E `++E a,,E a--E b..E c//E d00E e11E e22E h33E j44E n 55E s66E u77E ~88E 99E ::E  ;;E <<E ==E >>E ??E @@E  AAE BBE CCE  DDE  EEE FFE GGE HHE  IIE JJE KKE LLE MME NNE OOE PPE QQE  RRE SSE TTE  UUE VVE WWE XXE YYE ZZE [[E  \\E ]]E ^^E __E ``E aaE bbE ccE ddE eeE ffE ggE hhE  iiE jjE kkE llE mmE nnE ooE ppE qqE rrE ssE ttE uuE vvE  wwE xxE  yyE  zzE  {{EABRT||ENOTMOD}}E RR#~~E E SLE VE WE  E  E E ETOOLONGE _TRUNCATEDEWIDTHE KE E E  E  E  E E E E E E E E ?E BE RE cE dE gE E E E E  E E E E  E E E E E E E E E E E E  E E EABORTE GEE E 7E <E ME QE \E ^E _E `E aE bE cE eE gE iE kE lE E EDISCONE EDE )E 9E AE EE [E E E E E RDE YE mE oE rE wE E E E E E E  E  E  EXITE S`E E E TIMEMISMENOTFNDETOOLONGE E S6E E EINPSAVE T E E E E  E $E % E %E 'E *E +E +E 4 E ;E < E =E >E ?E CE LE O E [E \E ]E ^E _E a  E f  E g  E h  E l  E tE uE wE {E E  E  E  E  E  E E  E E E E  E E E    E !!E ""E ##E $$E  %%E  &&E ''E ((E ))E **E ++E ,,E --E ..E  //E 00E 11E 22E 33E 44E 55E 66E 77E 88E 99E ::E ;;E <<E ==E >>E ??E @@E AAE BBE CCEENDSBDDEENABEEE RFFE GGEFAILHHEINGIIE JJE KKENOTMBXLLE RRMMEIGNOREDNNE NG4OOE 5PPE 6QQE WRRE fSSE gTTE UUE VVE WWE S*XXE YYE ZZE TOOSHORT[[E_NODES\\ETERAL]]E  ^^E __E ``E KBhaaE bbE ccEGRANTEDddEREFNEGeeEPNOTDONffEWSETFULggE MBhhE iiE F jjE NEkkEKGCRPT_llEERR`mmEFILQnnE L7ooE NDappESENSEbqqE MLrrEOAD ssE ttE -uuE 0vvE EwwE KxxE ^yyE {zzE {{E ||E }}E ~~E E E E EABLE9 E EDE E  E *E 8E CE HE S E ^E aE fE iE jE qE rE tE zE E E E E E E E E E E E E E E E E E E E E E E E RRE EFAILUREEILE-EIDXE NG#E HE IE JE e E E E E E E EMOD0ESECDBECALE E E E E E !E $E +E ,E -E 0E ; E BE TE UE rREQUEUE"LOCALv                              E  E !E %E 'E ,E /E 4 E 5!!E =""E =##E >$$E >%%E P &&E P''E P((E Q))E Q**E R++E S,,E V--E W..E W//E X 00E X11E Y22E \33E ]44E `55E `66E a77E b88E e99E f::E g;;E t <<E w==E x>>E z??E |@@E }AAE ~BBE CCE DDE EEE FFE GGE HHE IIE JJE KKE LLE MME NNE OOE PPE QQE RRE SSE TTE UUE VVE WWE XXE YYE ZZE [[E \\E  ]]E ^^E __E ``E  aaE bbE ccE ddE eeE  ffE ggE hhE iiE jjE kkE llE mmE nnE ooE ppE qqE rrE ssE ttE  uuE  vvEBEGwwECLOSExxE ED(yyE )zzE *{{E +||E -}}E .~~E 0E 1E 2E 3E 5E 6E E  OFEING2E EE FE GE HE ME Y E {E E E E E E E E E E E E E  E  E  E  E  E  E  E  E  E E SE PITSTERREREADERRE NLBUFBEGENOTSAFEEOPENE ERRE SBE `E E E E E E E EHOMEEMODEXCERCHHOME_ENTRYE lE E USTIFIEDEVOLFIDE WRITEERRE KBDIN_USEE FEERNEL=E FE  E E E YE E E  E  E  E E E E E E E E E E E E E E %E .E /E 3E 7E ?E EE EE GE JE JE TE WE ^E _E h E nE o E p E tE { E  E  E  E  E E E E E E  E E E E E  E  E  E E E E E  E E E E E  E E   E   E   E   E   E E E E E E E E E E E E  E E E E E E E   E !!E ""E ##E $$E %%E &&E ''E ((E ))E **E ++E  ,,E  --E ..E  //E 00E 11E 22E 33E 44EALRINS55EMBINC66EBOARDH77E 88E 99ECHANGED::E NV;;EDEFPRO<<E ED==ELENERR>>E ??EOCKED@@E MAPNOTFNDAAE NAMEEXISTBBELNGCCEOTDEFDDEFNDEEE OUFFEVERGGEPADHHERERRIIE S JJE KKE LLE MME NNE OOE PPE QQE RRE SSE UPERSEDEDTTETRNERRUUEUNKNOWVVEWINVWWEORDXXE YYE 8ZZE 9[[E :\\E :]]E >^^E D__E E``E GaaE JbbE UccE UddE Z eeE `ffE `ggE dhhE kiiE mjjE nkkE qllE ummE wnnE xooE ~ppE  qqE  rrE ssE ttE uuE vvE wwE xxE yyE zzE {{E ||E }}E ~~E E E E E E EPARAME S/E_LENE FFE ITE E E E DE HE aE hE lE nE E E E E E E NMEOWN*E @ E WE  E  E E E E E E E  E RFE NLSTAKNVE SIE ZELABELE ,E :E ;E D E E E OE QE Z E cE jE yE zE |E }E ~E  E E E  E  E  E E  E E E E E E E E E E E E E E E E E E E E EDdE RRE S_E E E ESTACKOE CK; E NUE  E E E EGUAGEbE E E E  ERGE E E E 9E <E ] E dE dE E E E E E E E E E E E ECNTE E R E 1E E E E  E E STE  E E E 8E PE    E   E   EIPCF8  E Tj  E zE E E E E E E E EACPP E ZE d E E EENCYE E RE  E 8  E ^ !!E ""E STOPPING##E YM$$EUNCHW%%EWSON &&EBLNOTALLINPIP''E OVRWRITE((E NM))E N**E U++E W,,E ^--E ..E //E 00E 11ESIZE<22E R33E  44E $OUTPUT_HELP 55EFAIL66E X77ECKERR88EPAGFUL99ELCOMT::EGRP;;E SR<<E ==E >>EDBPRES??E E@@EX_LjAAE lBBEEADVCCE WDDE tEEE uFFE GGE ERHHE IIE JJEINGKKE RN&LLE eMME NNE STOOE !PPE EQQE RRE  SSEVING" TTE JUUE FTVVE ?WWE DXXE EYYE  ZZE [[EGAL\\E 5]]E 6^^E @__E f``E gaaE bbE ccE  ddE eeE ffE NggEGTHhhE  iiE  jjE kkE  llE  mmE  nnE ooE ppE qqE rrE ssE  ttE uuE &vvE ' wwE ,xxE 0yyE 1 zzE 2{{E 3 ||E 3}}E :~~E @E @E B E EE HE IE NE OE OE ^E fE hE nE oE oE oE pE qE tE v E }E ~E E E E E E E E E E E E E  E E E E E E E E  E E E E E E E  E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E  E  E EMUSONEENOTEQLE PWDSYNCHEVIOE _NOTBLKMULTOEPAGMULTE SSE E E E 'E 3E 4E 6E 7E 9E FE `E E E  E E ETTER7E ]E EVELE E  E  E  E  E E E E !E "E (E .E 3E 3E 6E 9E : E <E B E H E PE p E qE t E }E ~E E E   E   E   E    E    E  E E E E E  E  E E E E E E E  E E  E E  E   E S[ !!E ""E ##E $$E %%E X&&EICALA''E B((E C))E D**E E++E L,,E --E IB$FREE_VM ..ETPARSE//E 00EFAIL11EIND22E 33ENAMLNG44E 55EOTOPN66EOPN77ERARIAN.88E ES'99E /::E T;;E U<<E ==E >>E ??E Y@@E  AAE BBE CCE DDE EEE FFE GGE HHE IIE !JJE "KKE $LLE &MME (NNE )OOE * PPE ,QQE ,RRE -SSE .TTE /UUE 0VVE 0WWE 0XXE 3YYE 4ZZE 9[[E :\\E ;]]E =^^E A__E D``E GaaE HbbE HccE IddE LeeE c ffE k ggE l hhE tiiE {jjE | kkE |llE }mmE  nnE  ooE  ppE  qqE  rrE  ssE  ttE  uuE  vvE  wwE  xxE yyE zzE  {{E  ||E }}E  ~~E  E  E  E E E E E  E E E E  E E E E  E E E E  E E  E E  E  E  E  E E E E E E E ECENSEE E E E E , E 4 E >E ?E OE [E bE tE vE E E E E E  E E E  E E E E E E E E E E E DF E S&E iE E E EINGEIGNEMIT E E E ( E +E 2 E 4E ; E ? E AE EE T E [ E E  E E E  E E  E E E E  E  E E  E E E E  E E E ECHANGEDEE ED(E 3 E  E S, E oE E E NEE  E E E E E  E  E E E E E E  E E E E  E "E #E #E %  E &  E &  E '  E '  E 'E ( E ) E -E 0E 0E 1E 5E 9E AE HE JE KE SE TE UE UE VE Y  E Z!!E Z""E [##E [$$E \%%E \&&E ]''E ^((E _))E `**E `++E a,,E a--E b..E c//E d00E e11E e22E h33E j44E n 55E s66E u77E ~88E 99E ::E  ;;E <<E ==E >>E ??E @@E  AAE BBE CCE  DDE  EEE FFE GGE HHE  IIE JJE KKE LLE MME NNE OOE PPE QQE  RRE SSE TTE  UUE VVE WWE XXE YYE ZZE [[E  \\E ]]E ^^E __E ``E aaE bbE ccE ddE eeE ffE ggE hhE  iiE jjE kkE llE mmE nnE ooE ppE qqE rrE ssE ttE uuE vvE  wwE xxE  yyE  zzE  {{EABRT||ENOTMOD}}E RR#~~E E SLE VE WE  E  E E ETOOLONGE _TRUNCATEDEWIDTHE KE E E  E  E  E E E E E E E E ?E BE RE cE dE gE E E E E  E E E E  E E E E E E E E E E E E  E E EABORTE GEE E 7E <E ME QE \E ^E _E `E aE bE cE eE gE iE kE lE E EDISCONE EDE )E 9E AE EE [E E E E E RDE YE mE oE rE wE E E E E E E  E  E  EXITE S`E E E TIMEMISMENOTFNDETOOLONGE E S6E E EINPSAVE T E E E E  E $E % E %E 'E *E +E +E 4 E ;E < E =E >E ?E CE LE O E [E \E ]E ^E _E a  E f  E g  E h  E l  E tE uE wE {E E  E  E  E  E  E E  E E E E  E E E    E !!E ""E ##E $$E  %%E  &&E ''E ((E ))E **E ++E ,,E --E ..E  //E 00E 11E 22E 33E 44E 55E 66E 77E 88E 99E ::E ;;E <<E ==E >>E ??E @@E AAE BBE CCEENDSBDDEENABEEE RFFE GGEFAILHHEINGIIE JJE KKENOTMBXLLE RRMMEIGNOREDNNE NG4OOE 5PPE 6QQE WRRE fSSE gTTE UUE VVE WWE S*XXE YYE ZZE TOOSHORT[[E_NODES\\ETERAL]]E  ^^E __E ``E KBhaaE bbE ccEGRANTEDddEREFNEGeeEPNOTDONffEWSETFULggE MBhhE iiE F jjE NEkkEKGCRPT_llEERR`mmEFILQnnE L7ooE NDappESENSEbqqE MLrrEOAD ssE ttE -uuE 0vvE EwwE KxxE ^yyE {zzE {{E ||E }}E ~~E E E E EABLE9 E EDE E  E *E 8E CE HE S E ^E aE fE iE jE qE rE tE zE E E E E E E E E E E E E E E E E E E E E E E E RRE EFAILUREEILE-EIDXE NG#E HE IE JE e E E E E E E EMOD0ESECDBECALE E E E E E !E $E +E ,E -E 0E ; E BE TE UE rREQUEUE}  LOCALLY-   TE   + ,  T  U  d  x  y          D'  ION            !! #"" 0 ## 3$$ 4%% 5&& :'' ;(( <)) <** =++ @,, E -- H.. J// L00 T11 Y22 a33 c44 e55 } 66 }77 }88 ~ 99 ~:: ;; << == >> ?? @@ AA BB  CC  DD EE FF GG HH II JJ KK LL MM NN OO PP QQ RR SS TT UU VV WW XX YY ZZ [[  \\  ]] ^^ __  AL``  Saa bb K7cc =dd Qee Sff Tgg Uhh Wii pjj rkk sll smm unn voo xpp x qq yrr ss tt uu vv ww xx yy zz  {{ || }}  ~~               ED           3 6 < = N P \ g h i i j k k l }                     RRHEADERING MGRERR Sd o q          VOLWAIT _TIMEOUTNEGOTESTPRES G           ! ( (  /  0  F I K K M N P W Z [ _ _ b c h i m |                              ARITHM     CLOS  DISABL  ERR  FAI LCLERRILE     GEDINGN     IC  F G H I J   l!! m""  ##  $$  %% AL &&  '' (( $)) *** ,++ :,, ;-- E.. G // O00 R11 X22 Y33 _ 44 `55 66 77 88 99 :: ;; <<  == >> ?? @@  AA BB CC DD EE FF GG HH II JJ KK LL MM NN OO PP QQ RR SS TT UU VV WW S_XX NYY `ZZ [[ \\ ]] ^^ __ ``  aa bb IT cc SddTVALMAXee  INff RESETgg O hhNOPRIVbiiLINK jjNAM kk Ell mm nn RRooOUT1ppRDERRqqTIMErrWRTERRssZERNEGtt_BUSYuuCREATEDvvFAILwwIN_USExx O yy bzz {{ ||MINSIZE}} NOT_IN_USE~~ NG      5 C E F I O \ k k l l q                                            DST ER 1 4 A C V m x |           ST3 N LISTWORD< = > ? @ A B C D E OKING UP  ERR PBACKw       ER[ SS   ESU T          " +  > N _ c x     EXTHDRHEADERINFOMPC SGRESCONSCAN YMP W        !   %   _   f    CHANNELCNTW DISKSPACE ERn   STMEMORY PGFLQUOTAaQUOTA PNOTMAPPEDPSBRRJACCESSDENIED REJECT CORRUPT!DELETED"ISABLE#  ILLEGAL$!! NCOMPVER""USE%##VMSG$$ PASSWORD&%% NAMEUNKNOWN'&& OSERVICE(''TART)(( TOFFERED*))QUEUED+**SUPPORT,++ REMDISABLED-,,SOURCE.-- SHUTDOWN/..UNKNOWN0//SERDIS100  C211L_MISS322 SB33TERR444MSG1555 2666TOTBK777VALTIM888 TC999DRIVERd :: j;; E<< UNALRFRE:==RESSYS;>> VLTOOLNG??SADDER<@@MLTER=AASBTER>BBHLER?CCRER@DDVADDERAEEMLTERBFFSBTERCGGHLERDHHREREIIMA780-JJCHINEKK LL /MM FNN TOO PP QQ RR SS TT UUCHKFVVLBFMTERGWW HXXNAMLNGIYY ROZZ [[ 3\\ 4]] G^^ H__ I`` Jaa Tbb Ucc Wdd Xee ff gg hh ii  jj  kk  ll mm  nn  oo  pp  qq DE rr ss tt uu vv ww xx yy zz {{GNETICx|| }}} ~~       TAPE  ILI i    BOX  , 1 < = J K P U  U V n o p q r s t u v {               CAP# N- TAINERS*ENANCE JOR KEL m  WSLELINGLFORMEDUNCTION   S NAGEDMENT6 b    R    [ ` d e g o ~                              S DATORY  HIFEST     PULATION UFACTURER  Y       "  ) M \ _ b g h i  i r                                           !! "" ## $$ %% && '' (( )) **  ++ ,, --_TO_ONEM.. P// 00 11 "22 %33 %44 +55 366 H77 N88 O99 P:: S;; i<< j == t>> u?? w@@ }AA BB  CC  DD EE FF GG  HH  II JJ KK LL MM NN  OO PP QQ RR SS TT UU VV WWAREANXXCNTZEROYYONFLICTZZERR%[[HDRBADP\\INUSEQ]]MODERR,^^PED __ ``  aa .bb 3cc 5 dd aee dff l gg hh ii jjINGLkk ll mm nn oo Spp  qqRGIN rr kss SRtt luu vv K2ww xx EDyy zz {{ M|| Q}} R~~ U r w                     DMTQ R S S, KUNLR SK  < A }                TERM {     TCH    6 @ S S Z ] ^ ^ ^  _ _ ` a b c j m q z                             ED T y  S H T    ING    , A L    ERIALR H        X3  U V W    ARGEXCXUSEYBADZ [DEV\ IF]FILEScIMUM     & (   )   ,   0   5   J ] ^  ^ ` c c e e f n v            !! "" ##  $$ %% && '' (( )) ** ++ ,, -- .. //  00  11 22 33  44 55 66 77 88 99LAB_::INKS`;; MAPPEDBUFa<<NAM&==POL>>PARMb??SERVc@@TOOBIGdAAUNITSdBB eCCVALUEfDDOLSgEE hFF iGG_ARGSXHH YII Y JJ  KK  LL MM NN OO PP  QQ 2RR 5SS 7TT 8UU <VV =WW >XX A YY MZZ M[[ Q\\ Y]] j^^ k __ k`` aa  bb cc dd ee ff gg hh ii jj kk ll mm nn oo ppNOTINDXjqq krr BAlssCBHUNGltt CmuuFULLnvvTOOSMLowwXASGERRpxxCRERRqyyTERRrzzERRs{{RDERRt||EDERRu}}WRTERRv~~CERR HECK INSTSYN  NOTVALIDPORT  RTBAR   D5CORUPT@ BSFCRUPTRFAILFERRIERRYERRMSG EANINGFULm LESS:CHANISMDIA  6 > N Q_FORMATU UMOFL  ET   IMACCLOCiLLERR OCFAILBER      " $ ' ( - . : A  I R Y [ ^ ^ _ a b |  }           S? X e      HIP UG   DEALLOFAILERRS FUL  NOTACCSVD ORY                                      ! "  % ( + - . . / 9 :  ;  L  L  L O  Q R   S   S   T   W   X Y Z Z ^  g h i k l r y z  {  |  | } ~    !! "" ## $$ %% && '' (( )) ** ++  ,,  -- .. // 00 11  22  33  44 55 66 77 88 99 :: ;; << == >>  ?? @@ AA BB CC DD EE FF GG HH II  JJ KK LL MM  NN OO PP  QQ RR  SS TT  UU VV  WW XX YY  ZZ [[ \\  ]] ^^  __ ``  aa bb  cc dd ee  ff gg hh ii jj kk ll mm nn oo pp qq rr ss tt uu vv ww xx yy zz {{ || }} ~~ ALCREFNOTRGE & [ \ _ ` c j m   D SSAGE           ( 0 0 1  8 : < > ? A B C D D F  F H J K L M M  M N P P Q U  U V X ^ t w xE xA   MESSAGEy                                         !! #"" 0 ## 3$$ 4%% 5&& :'' ;(( <)) <** =++ @,, E -- H.. J// L00 T11 Y22 a33 c44 e55 } 66 }77 }88 ~ 99 ~:: ;; << == >> ?? @@ AA BB  CC  DD EE FF GG HH II JJ KK LL MM NN OO PP QQ RR SS TT UU VV WW XX YY ZZ [[  \\  ]] ^^ __  AL``  Saa bb K7cc =dd Qee Sff Tgg Uhh Wii pjj rkk sll smm unn voo xpp x qq yrr ss tt uu vv ww xx yy zz  {{ || }}  ~~               ED           3 6 < = N P \ g h i i j k k l }                     RRHEADERING MGRERR Sd o q          VOLWAIT _TIMEOUTNEGOTESTPRES G           ! ( (  /  0  F I K K M N P W Z [ _ _ b c h i m |                              ARITHM     CLOS  DISABL  ERR  FAI LCLERRILE     GEDINGN     IC  F G H I J   l!! m""  ##  $$  %% AL &&  '' (( $)) *** ,++ :,, ;-- E.. G // O00 R11 X22 Y33 _ 44 `55 66 77 88 99 :: ;; <<  == >> ?? @@  AA BB CC DD EE FF GG HH II JJ KK LL MM NN OO PP QQ RR SS TT UU VV WW S_XX NYY `ZZ [[ \\ ]] ^^ __ ``  aa bb IT cc SddTVALMAXee  INff RESETgg O hhNOPRIVbiiLINK jjNAM kk Ell mm nn RRooOUT1ppRDERRqqTIMErrWRTERRssZERNEGtt_BUSYuuCREATEDvvFAILwwIN_USExx O yy bzz {{ ||MINSIZE}} NOT_IN_USE~~ NG      5 C E F I O \ k k l l q                                            DST ER 1 4 A C V m x |           ST3 N LISTWORD< = > ? @ A B C D E OKING UP  ERR PBACKw       ER[ SS   ESU T          " +  > N _ c x     EXTHDRHEADERINFOMPC SGRESCONSCAN YMP W        !   %   _   f    CHANNELCNTW DISKSPACE ERn   STMEMORY PGFLQUOTAaQUOTA PNOTMAPPEDPSBRRJACCESSDENIED REJECT CORRUPT!DELETED"ISABLE#  ILLEGAL$!! NCOMPVER""USE%##VMSG$$ PASSWORD&%% NAMEUNKNOWN'&& OSERVICE(''TART)(( TOFFERED*))QUEUED+**SUPPORT,++ REMDISABLED-,,SOURCE.-- SHUTDOWN/..UNKNOWN0//SERDIS100  C211L_MISS322 SB33TERR444MSG1555 2666TOTBK777VALTIM888 TC999DRIVERd :: j;; E<< UNALRFRE:==RESSYS;>> VLTOOLNG??SADDER<@@MLTER=AASBTER>BBHLER?CCRER@DDVADDERAEEMLTERBFFSBTERCGGHLERDHHREREIIMA780-JJCHINEKK LL /MM FNN TOO PP QQ RR SS TT UUCHKFVVLBFMTERGWW HXXNAMLNGIYY ROZZ [[ 3\\ 4]] G^^ H__ I`` Jaa Tbb Ucc Wdd Xee ff gg hh ii  jj  kk  ll mm  nn  oo  pp  qq DE rr ss tt uu vv ww xx yy zz {{GNETICx|| }}} ~~       TAPE  ILI i    BOX  , 1 < = J K P U  U V n o p q r s t u v {               CAP# N- TAINERS*ENANCE JOR KEL m  WSLELINGLFORMEDUNCTION   S NAGEDMENT6 b    R    [ ` d e g o ~                              S DATORY  HIFEST     PULATION UFACTURER  Y       "  ) M \ _ b g h i  i r                                           !! "" ## $$ %% && '' (( )) **  ++ ,, --_TO_ONEM.. P// 00 11 "22 %33 %44 +55 366 H77 N88 O99 P:: S;; i<< j == t>> u?? w@@ }AA BB  CC  DD EE FF GG  HH  II JJ KK LL MM NN  OO PP QQ RR SS TT UU VV WWAREANXXCNTZEROYYONFLICTZZERR%[[HDRBADP\\INUSEQ]]MODERR,^^PED __ ``  aa .bb 3cc 5 dd aee dff l gg hh ii jjINGLkk ll mm nn oo Spp  qqRGIN rr kss SRtt luu vv K2ww xx EDyy zz {{ M|| Q}} R~~ U r w                     DMTQ R S S, KUNLR SK  < A }                TERM {     TCH    6 @ S S Z ] ^ ^ ^  _ _ ` a b c j m q z                             ED T y  S H T    ING    , A L    ERIALR H        X3  U V W    ARGEXCXUSEYBADZ [DEV\ IF]FILEScIMUM     & (   )   ,   0   5   J ] ^  ^ ` c c e e f n v            !! "" ##  $$ %% && '' (( )) ** ++ ,, -- .. //  00  11 22 33  44 55 66 77 88 99LAB_::INKS`;; MAPPEDBUFa<<NAM&==POL>>PARMb??SERVc@@TOOBIGdAAUNITSdBB eCCVALUEfDDOLSgEE hFF iGG_ARGSXHH YII Y JJ  KK  LL MM NN OO PP  QQ 2RR 5SS 7TT 8UU <VV =WW >XX A YY MZZ M[[ Q\\ Y]] j^^ k __ k`` aa  bb cc dd ee ff gg hh ii jj kk ll mm nn oo ppNOTINDXjqq krr BAlssCBHUNGltt CmuuFULLnvvTOOSMLowwXASGERRpxxCRERRqyyTERRrzzERRs{{RDERRt||EDERRu}}WRTERRv~~CERR HECK INSTSYN  NOTVALIDPORT  RTBAR   D5CORUPT@ BSFCRUPTRFAILFERRIERRYERRMSG EANINGFULm LESS:CHANISMDIA  6 > N Q_FORMATU UMOFL  ET   IMACCLOCiLLERR OCFAILBER      " $ ' ( - . : A  I R Y [ ^ ^ _ a b |  }           S? X e      HIP UG   DEALLOFAILERRS FUL  NOTACCSVD ORY                                      ! "  % ( + - . . / 9 :  ;  L  L  L O  Q R   S   S   T   W   X Y Z Z ^  g h i k l r y z  {  |  | } ~    !! "" ## $$ %% && '' (( )) ** ++  ,,  -- .. // 00 11  22  33  44 55 66 77 88 99 :: ;; << == >>  ?? @@ AA BB CC DD EE FF GG HH II  JJ KK LL MM  NN OO PP  QQ RR  SS TT  UU VV  WW XX YY  ZZ [[ \\  ]] ^^  __ ``  aa bb  cc dd ee  ff gg hh ii jj kk ll mm nn oo pp qq rr ss tt uu vv ww xx yy zz {{ || }} ~~ ALCREFNOTRGE & [ \ _ ` c j m   D SSAGE           ( 0 0 1  8 : < > ? A B C D D F  F H J K L M M  M N P P Q U  U V X ^ t w xEA } A  MESSAGES A A A A  A A A  A  A & A C A b A cA hA iA TA HODA FNA SA  YNULPGFLA GMTA A A A A A A HDJA ERRA ICROA y  A CODE!!!A 6""A 7##A $$A %%A GHT &&A z''A  ME$FILETYPE!((A NICOPY^))A a**A b++A MUM,,A --A ..A //A 00A '11A 322A 433A 644A 755A 966A h77A 88A 99A ::A ;;A  <<A ==A  >>A  ??A @@A UTESAAA VALUEBBA WSCNT5CCA :DDA [EEA RBFOVFFFA RORGGA  SCONFIGUREDHHA UNIIIA ENDSTAJJA XTREFKKA FILSPE LLA MATCHMMA  NNA OOA PPA QQA RRA SSA 5TTA 8UUA hVVA iWWA jXXA kYYA lZZA o[[A \\A  ]]A ^^A __A ``A aaA bbA  ccA ddA eeA  EDZffA  INGggA NAMREQ!hhA REQPAR"iiA SINGjjA kkA llA mmA nnA  ooA "ppA $qqA $rrA %ssA &ttA &uuA 'vvA (wwA *xxA +yyA ,zzA .{{A 0||A 7}}A 7~~A 9 A BA BA DA FA HA KA L A NA [A dA dA eA gA hA jA jA jA kA mA oA uA vA yA zA {A ~A A A A A A A A A A  A A A A  A  A A A A A A A  A A A A  A ADAPTER#A END$A %A QUALSA  OTE(A  _END_DEVICE&A  INFO'A LNKQUAL)A PASS+A ELLEDzA A QUO,A TE-A TYGDEA YMTAB.A _PARAM*A TERNAM/A RAN0A XA ED1A O A TYPES1A KD2A  LBOPNERR3A 4A MATORB5A EABORT6A MA @A A A A NEMONICA 'A L7A  TCLUFAIL8A  ODDELERR0A EA A A  A  A  A #A $ A ( A *A - A 9A :A @A FA IA KA VA [A dA jA kA mA qA vA yA {A  A A A A A A A A  A A A A A A A A  A  A LA A MoA   A   A HANGUP  A S  A   A ET9A IFIABLEtA CATIONA 5A A A A A  SA A A A A EDA "A & A )A 7A :  A ;!!A =""A ?##A B$$A C %%A G &&A I''A L((A M))A N**A ^++A c,,A d--A d..A h//A n00A q11A 22A 33A 44A 55A 66A 77A 88A 99A ::A ;;A <<A ==A >>A  ??A @@A AAA RCBBA jCCA SDDA YEEA <FFA >GGA _HHA IIA JJA KKA LLA MMA NNA OOA  PPA ERR=QQA >RRA ING1SSA <TTA =UUA JVVA WWA XXA YYA ZZA _RANGEK[[A NUSE!\\A LINK?]]A NAM@^^A LNGA__A ODEB``A TADDCaaA FNDDbbA OUTAIEccA  SFddA BIGeeA  SHffA PORTIggA QUAVALhhA OTAJiiA  RANGEMARKSKjjA ELNBAKLkkA PLERR9llA FLK1:mmA SERVICEMnnA ULEooA  ppA qqA  rrA  ssA  ttA  uuA  vvA  wwA  xxA  yyA zzA {{A ||A }}A ~~A A A A A A  A A A A A A A A A A  A  A  A !A $A $A %A ' A )A ) A ,A 0A 0A 0 A 1 A 3A 4A 6A 9A :A :A ;A ;A =A =A >A >A ?A ?A ?A @A @A AA AA BA CA DA DA EA FA GA HA IA JA KA LA MA MA NA OA PA QA RA SA SA TA TA UA UA VA WA WA YA YA ZA ZA [A [A \A ]A ^A _A `A aA a A bA b A cA cA c A dA eA eA fA fA gA gA hA iA iA jA jA kA k A lA mA nA nA oA oA pA qA qA rA sA tA tA uA vA wA xA yA zA zA {A {A |A |A }A }A ~A A A   A   A   A   A   A A A A A A A A  A A  A  A A A A A A A A   A !!A ""A ##A $$A %%A &&A ''A ((A ))A **A  ++A  ,,A --A ..A //A 00A 11A 22A 33A  44A 55A 66A 77A 88A 99A ::A  ;;A <<A ==A >>A ??A  @@A AAA  BBA CCA DDA  EEA  FFA  GGA  HHA IIA JJA  KKA  LLA MMA  NNA  OOA  PPA QQA RRA SSA  TTA  UUA VVA  WWA XXA YYA ZZA [[A  \\A  ]]A ^^A __A ``A aaA bbA ccA ddA eeA S ffA  ggA ZhhA  iiA jjA  kkA _NAMEillA qmmA NITSNnnA NITOR}ooA }ppA qqA rrA ssA ttA ING uuA !vvA %wwA VxxA PXyyA YzzA Z{{A [||A \}}A RE~~A A A A A A A A A  A  A  A  A  A A A A A A A 0 A 8A :A BA DA KA QA SA WA W A mA m A oA vA zA {A |A }A }A A A A A A A A  A A A A A A A A A A A A A A A A THANA STaA TIF1A JA A NOTSUP1A U$uA DSAvA NEWVOLOA T A 6A 7A 8A FA OA PA SA WA WA ZA \A ]A `A dA fA iA sA uA vA xA yA A A A A A A  A A A A  A  A  A DEVPA EDA  A  A  A ,A -A 5A > A N A QA RA TA UA c A i A n A q A rA sA u A uA y A A  A A A A A  A A  A  A   A   A    A    A    A RRRA  ORSA F11TA ORUA INGKA TA YA A VERVA WA XA YA ZA [A \A ]A ^A _A `  A a!!A b""A c##A d$$A SEe%%A INVe&&A VOLf''A VEi((A ))A  **A  ++A ,,A D--A g..A h//A FILE00A  Sh11A TOCOPYi22A POFFSETQ33A ]44A 55A QSj66A RCk77A  ES_PFNSMALL88A Gl99A GTMTCHm::A Nn;;A S<<A J==A [>>A o??A SCIOERRp@@A P AAA PBBA qCCA rDDA sEEA FFA  GGA HHA IIA NOTLDqJJA rKKA SERVsLLA _LOADMMA GBUFSETtNNA CMAIIFuOOA vPPA FILOPNAQQA HLP RRA  $LIBRARYSSA NOTFNDwTTA xUUA  QUEEMPTYyVVA NGENDSzWWA SNGOMDXXA TINTERR{YYA TAACPZZA LBLLONG|[[A }\\A NONA~]]A  XCNTNONZ^^A UCH*__A ``A aaA  LAPPLYTO;bbA CLUOPTccA ddA DEFReeA ffA LBLggA hhA NKGciiA PSCjjA TYPEdkkA ELFSEC llA GRPmmA MASKnnA OBJ<ooA NNM=ppA PTqqA PRIrrA SC ssA ttA INIuuA REFLNKGevvA SECwwA HRPSC6xxA yyA TALLOCzzA ECO{{A XTHDR||A FRO}}A ~~A ImA A A BUSA CASTA !A  S3A DEFA HOST@ A PART;A DA THPA QA LEA &A 6A 8A ;A >A JA LA MA OA VA WA ]A cA iA tA uA A A A A A A A A A A A A A A A A  NAMESA  _ISDSA ICATION=A BA S A W A  A  A Y<A =A OA RA A A A A A A A A A A  ROCESSINGA A  ORA A SELECTA  THREADEDVA LKSECA NMLA MHDJA OPRA READA MSA UPGRADE>A STA A A A  A  A  A A A A A #A $A $A %A &A 'A )A + A -A -A /A 2A 2A 3 A 3A 4A 5A 8A : A < A AA EA HA LA PA TA UA UA V A Y A Z A ]A dA fA hA lA mA qA }A A A A A  A A A   A   A   A   A   A A A A A A  A  A A  A A A A A A A A A A   A !!A ""A ##A $$A %%A &&A  ''A ((A ))A **A ++A ,,A --A ..A //A 00A  11A  22A  33A 44A  55A 66A 77A 88A 99A ::A  ;;A <<A ==A >>A ??A @@A AAA BBA CCA DDA BECONSTEEA JSBFFA ONEGGA YN2HHA CLOSEFLIIA TEXBJJA KKA UALLYOLLA MMA  VABORTEDNNA  COMPLETEOOA XPRsPPA  NAFADDERRQQA RRA MSGSSA CONERRTTA REERRUUA VVA DNEWWA ONEMSGXXA MAXEXYYA ODERRZZA MSG[[A NOMODS\\A REMERR]]A MSG^^A UAEERR__A ``A M$aaA |bbA  ccA ddA eeA EffA ggA  hhA  iiA jjA  kkA llA mmA nnA  ooA  ppA qqA rrA ssA ttA uuA vvA wwA xxA  yyA zzA {{A ||A }}A  ~~A A A A  A A A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A A A A A A  A A A A A  A A A A A A A A A A  A  A A A A A A A A  A A A A A A A A A A A A A  A A A A A A A A  A  A  A A A  A  A  A A A A A A A A A A A A A A A A A A A  A A  A A A A A  A A A  A  A  A  A  A  A !A !A !A !A "A "A #A #A $A $A $A $  A %  A %  A %  A %  A &A &A &A &A &A &A &A &A 'A ' A ' A 'A 'A 'A 'A (A (A (A (  A (!!A (""A (##A )$$A )%%A )&&A ) ''A ) ((A ) ))A )**A *++A *,,A * --A *..A *//A *00A +11A +22A ,33A ,44A ,55A , 66A ,77A ,88A -99A -::A -;;A -<<A .==A .>>A . ??A .@@A .AAA .BBA /CCA /DDA / EEA /FFA /GGA 0HHA 0IIA 0JJA 0 KKA 0 LLA 0MMA 0NNA 1OOA 1PPA 1 QQA 1 RRA 2SSA 2TTA 2 UUA 2 VVA 2 WWA 2XXA 2YYA 3ZZA 3[[A 3\\A 4]]A 4 ^^A 4__A 4``A 5aaA 5bbA 5ccA 5ddA 6eeA 6ffA 7ggA 7hhA 7iiA 7 jjA 7kkA 7llA 7mmA 7nnA 8ooA 9ppA 9qqA 9rrA 9ssA 9ttA :uuA : vvA :wwA :xxA ;yyA ;zzA ;{{A ;||A <}}A <~~A < A < A <A <A <A =A =A = A =A =A >A >A >A >A ?A ?A ?A ?A ?A @A @ A @A @A @A @A AA AA AA BA BA BA CA CA CA CA DA DA DA DA EA EA E A EA EA FA FA FA FA FA GA G A G A GA GA GA GA GA HA HA HA H A HA HA IA IA IA IA I A I A IA IA IA I xE Gm  NAMEI J J K K K L L L L L  L L L M M M M  M  M N N  N N N O O O O  O  O O!! O"" O## P$$ P%% P&& P'' P(( P)) Q** Q++ Q,, Q-- Q.. Q// R00 R11 R22 S33 S 44 S55 S66 S77 T88 T99 T:: T;; U<< U== U>> U ?? U@@ UAA VBB VCC VDD V EE V FF VGG WHH WII WJJ WKK WLL XMM XNN XOO YPP YQQ YRR YSS ZTT Z UU ZVV ZWW ZXX [YY [ ZZ [[[ [\\ \]] \^^ \__ \`` \aa \bb \cc ]dd ]ee ]ff ]gg ]hh ]ii ^jj ^kk ^ ll ^ mm ^nn ^oo ^pp ^qq _rr _ss _tt _ uu _ vv _ww `xx `yy `zz ` {{ `|| a}} a ~~ b b  b  b b c c c  c c d d  d e e e  e  e e e f f f f f  f  f f f g g g  g g g g h h h  h h h h i i  i  i j j j j k k k k  k k k k l l l m m n n n n n n n n o o o o o p p p  p q q q q q r r r  r r r s s s  s t t t  t  t t u u  u v v  v  v w x x x x y y y y  y  y z z z z z { { {  {  { { { | | |  |  | | |   |   }   }   }    }  } } ~ ~  ~ ~                    !! ""  ## $$ %% && ''  ((  )) ** ++ ,, -- .. // 00 11 22 33 44 55 66 77  88  99 :: ;; << == >> ?? @@  AA BB CC  DD EE FF GG HH II JJ  KK LL MM NN OO PP QQ RR SS TT UU VV WW XX YY  ZZ [[ \\ ]] ^^  __ `` aa bb cc dd ee ff gg hh ii jj kk ll mm nn oo  pp qq rr ss tt uu vv ww xx yy zz {{ ||  }} ~~                                                                                                                                                                                                      !! "" ## $$ %% && '' (( )) ** ++ ,, -- .. //  00 11 22 33 44  55 66 77 88 99 :: ;;  << == >>  ?? @@ AA BB CC DD  EE  FF  GG HH II JJ KK LL MM NN OO  PP QQ RR SS TT  UU  VV  WW XX YY ZZ  [[  \\  ]] ^^  __  ``  aa bb cc dd ee  ff  gg hh ii  jj  kk ll mm nn  oo pp qq  rr ss tt uu vv ww xx yy zz {{ || }} ~~                                                                                                                                                                                                                 !! "" ## $$  %% && '' (( )) ** ++ ,, -- .. // 00 11  22 33 44 55 66 77 88 99 :: ;; << == >> ?? @@ AA BB  CC  DD EE FF GG HH II JJ KK LL MM NN  OO PP QQ RR SS TT UU VV WW  XX  YY ZZ [[ \\ ]] ^^ __ `` aa bb cc dd ee ff  gg hh ii jj kk ll MMA GBUFSETtNNA CMAIIFuOOA vPPA FILOPNAQQA HLP RRA  $LIBRARYSSA NOTFNDwTTA xUUA  QUEEMPTYyVVA NGENDSzWWA SNGOMDXXA TINTERR{YYA TAACPZZA LBLLONG|[[A }\\A NONA~]]A  XCNTNONZ^^A UCH*__A ``A aaA  LAPPLYTO;bbA CLUOPTccA ddA DEFReeA ffA LBLggA hhA NKGciiA PSCjjA TYPEdkkA ELFSEC llA GRPmmA MASKnnA OBJ<ooA NNM=ppA PTqqA PRIrrA SC ssA ttA INIuuA REFLNKGevvA SECwwA HRPSC6xxA yyA TALLOCzzA ECO{{A XTHDR||A FRO}}A ~~A ImA A A BUSA CASTA !A  S3A DEFA HOST@ A PART;A DA THPA QA LEA &A 6A 8A ;A >A JA LA MA OA VA WA ]A cA iA tA uA A A A A A A A A A A A A A A A A  NAMESA  _ISDSA ICATION=A BA S A W A  A  A Y<A =A OA RA A A A A A A A A A A  ROCESSINGA A  ORA A SELECTA  THREADEDVA LKSECA NMLA MHDJA OPRA READA MSA UPGRADE>A STA A A A  A  A  A A A A A #A $A $A %A &A 'A )A + A -A -A /A 2A 2A 3 A 3A 4A 5A 8A : A < A AA EA HA LA PA TA UA UA V A Y A Z A ]A dA fA hA lA mA qA }A A A A A  A A A   A   A   A   A   A A A A A A  A  A A  A A A A A A A A A A   A !!A ""A ##A $$A %%A &&A  ''A ((A ))A **A ++A ,,A --A ..A //A 00A  11A  22A  33A 44A  55A 66A 77A 88A 99A ::A  ;;A <<A ==A >>A ??A @@A AAA BBA CCA DDA BECONSTEEA JSBFFA ONEGGA YN2HHA CLOSEFLIIA TEXBJJA KKA UALLYOLLA MMA  VABORTEDNNA  COMPLETEOOA XPRsPPA  NAFADDERRQQA RRA MSGSSA CONERRTTA REERRUUA VVA DNEWWA ONEMSGXXA MAXEXYYA ODERRZZA MSG[[A NOMODS\\A REMERR]]A MSG^^A UAEERR__A ``A M$aaA |bbA  ccA ddA eeA EffA ggA  hhA  iiA jjA  kkA llA mmA nnA  ooA  ppA qqA rrA ssA ttA uuA vvA wwA xxA  yyA zzA {{A ||A }}A  ~~A A A A  A A A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A A A A A A  A A A A A  A A A A A A A A A A  A  A A A A A A A A  A A A A A A A A A A A A A  A A A A A A A A  A  A  A A A  A  A  A A A A A A A A A A A A A A A A A A A  A A  A A A A A  A A A  A  A  A  A  A  A !A !A !A !A "A "A #A #A $A $A $A $  A %  A %  A %  A %  A &A &A &A &A &A &A &A &A 'A ' A ' A 'A 'A 'A 'A (A (A (A (  A (!!A (""A (##A )$$A )%%A )&&A ) ''A ) ((A ) ))A )**A *++A *,,A * --A *..A *//A *00A +11A +22A ,33A ,44A ,55A , 66A ,77A ,88A -99A -::A -;;A -<<A .==A .>>A . ??A .@@A .AAA .BBA /CCA /DDA / EEA /FFA /GGA 0HHA 0IIA 0JJA 0 KKA 0 LLA 0MMA 0NNA 1OOA 1PPA 1 QQA 1 RRA 2SSA 2TTA 2 UUA 2 VVA 2 WWA 2XXA 2YYA 3ZZA 3[[A 3\\A 4]]A 4 ^^A 4__A 4``A 5aaA 5bbA 5ccA 5ddA 6eeA 6ffA 7ggA 7hhA 7iiA 7 jjA 7kkA 7llA 7mmA 7nnA 8ooA 9ppA 9qqA 9rrA 9ssA 9ttA :uuA : vvA :wwA :xxA ;yyA ;zzA ;{{A ;||A <}}A <~~A < A < A <A <A <A =A =A = A =A =A >A >A >A >A ?A ?A ?A ?A ?A @A @ A @A @A @A @A AA AA AA BA BA BA CA CA CA CA DA DA DA DA EA EA E A EA EA FA FA FA FA FA GA G A G A GA GA GA GA GA HA HA HA H A HA HA IA IA IA IA I A I A IA IA IA I xE }H  NAME1      2      D  A  Y           NOTFOUND S    / 0 1!! E"" M## R$$ V%% W&& t'' u((  )) ** ++ ,, PACE%-- '.. (// TOOBIG00 LONG11  _NOT_FOUND22 L33 44 55 66 77 ESS88 FSINV99 SIZ:: RSS;; OFIL<< NAF== RG>> ROW?? T<@@ FAULT<AA IVE. BB / CC 7 DD _ONLYEEE RFF URALLYGG  HH  VIGATINGII CBFAILJJ SKK EAR LL  MM LYNN CESSARY OO PP ED QQ TRR SS TT UU VV BOTHWW ED XX :YY UZZ `[[ c \\ ]] ^^  FILENAME__ SG``  aa bb  TOASSIGNcc VALUEdd IRTTERMee Fff GATABLEwgg hh EDii jj IVEkk ll 6mm ]nn loo }pp qq rr ss tt uu vv ww xx yy zz {{ SHBREF|| TRLEN}} TIM~~ ITHER? LSON  QV STED6 Z  [          ING& B z      LEVEL T $PROXYm  ACP}        SN BTS DIS ERR FAIL IOERR LSTMSG MBX%   NOBUF STATE PROXY+ , - . / 0 1 2 3 4 5   RCVPKT SYSSRV TRANCNT UAFACC WORK        $ -  < ? C H  Q ] o x                             W         & 3 7 @  O [ g h m p q q                                   COMPFIL DB ER FILES IGNORE LINK OGNAME PAGE ORT QUEUE SAVSET ECDB RVERDB ICE TAPE _FILE VERSION  XNOTUBA T   H!! T"" n## VOL$$ US%% && '' IA(( C)) KNAME0** S-++ ONFIG ,, b-- .. // MF00 NN11  22 33 , 44 ,55 - 66 1 77 388 499 5:: ;;; ;<< A== A>> E?? O @@ YAA h BB oCC qDD tEE uFF { GG ~HH  II  JJ  KK LL MM NN OO  PP QQ RR SS  TT UU VV WW XX  YY ZZ [[ \\ ]] ^^ __ `` aa bb  cc dd ee ff gg NAhh ii NNTjj kk ll mm NNnn Coo e pp q qq OACCEPTrr SSPss tt  PROXYuu MANvv BREXww PTMSGxx MECTX;yy NTzz P{{ CHAN|| DEV}} MAIL~~ TLINKS DAPTER MIN DB  GENTINITQ LIASG  LOC SPOOL OCLASS S TPRI NGLE SWER PIARGS QB ACP RG  SNACCESS  SIGNMENT TTCHNUMB FILEC UDIT SRV TH DATA OCNF ONFIG START  VAILABLEQ BACKUP DDATA INFO NNER ITMAP  OUNDRYD RANCH   EAKPOINT  UFOBJIDR PCKT  GCHK   VPVCB YPASS CACHE LLS TRANS USER NCMD RRIAGE BMAPS CAT  BBUFFOBJT DSARTN HANFND GE  S IVEN RREAD JIB  IRCGIVEN LA SS ES I ENT UDEV STER  MDMEM! PROC" RETURN EXEC# K$ RNL%  OMB& D' MSTLEV( YNC  UNICATION) PLSTS*  NCATENATE FIG LOG NECT+ SOLE, TEXT- IG. ROLU VBOOT/ JNL PBAD0  DEL1 DUP2 LOCK3 NODEL4 PROT5 SAMDEV6 YSDEL7 Y7 BOOT8 UF9 MBR: PUMATCH S;  REDENTIALS< SP< TRLMBX=  URRENTBUF> TID? D@ ATABINDA FND LINK BGRELO CLHLPB E          % & ' ( ) ) + + - . / 0 1 1 = @   A   B   C   E   F G I J Q R T U U \ ^ _ a g h h h k k   k!! l"" l## m$$ %% && '' (( )) ** ++ ,, -- .. // 00 11 22 33 44 55 66 77 88 99 :: ;; << == >> ?? @@ AA BB CC DD EE FF GG HH II JJ KK LL MM NN OO PP  QQ  RR SS TT UU VV  WW XX YY ZZ [[ \\ ]] ^^ __ `` aa  bb cc dd ee  ff gg hh  ii jj kk ll mm nn oo pp qq rr ss  CNTRSONLYCtt ODEDuu RYPTvv  DISABLEDEww ENABLEDFxx FAULTyy ER?zz INITIONG{{ PWDH|| INIERRI}} LEAVEJ~~ TE4 K L JNLACTM LOCKN  PERMANENT SHRADRO  MAND_ZERO  NOTAVAILP CLUQ MEMR PRESS RRT S  8 B M P S W       HUTU TQUEV S   1 VW ADAPX VLY Z FND GIVEN ICE[ \ D] NFO^ POL  XIT_ _ACTIVE  DEPARTED INIT RETRY START FND IAGNOSE` TONEa Cb ENTc UPDd SALLOWS CON PRIV KCLIENTe QUOTAf SPACEg PCONT NOTFND SLOOKUP OCLIST UMENT  S MAINh WNGRADEi PSEXT STQUEj TOOBIGk LNGl UMPHERE NAVm PEXCn ELEMo NABLEp CURINVX Y CODEq r  R RYPT DOFLINEs Tt RYu  DECLv SYMw x OBSTRy Mz { | PM} QUALS~ VENTS TLOG XCL  ECUTABLE9  ITHANDLER QUOTA TAUTH   END   RACTE FIDS LACC E  ACCESS CLOSED  ONNECTED ID NAME OPENED ROUTINE S TYPEF WRITE XTENG NAM  EH PURG XPSC SYM  OCUSOWNER NT RCMD MLARG  REE ULLCFG GBL SEC LDATA    OWNER   HREG   LOSYMo   PTRSVD   ROUP PNAM WILD SDREF HANDLER DJMT RRES EART BEAT LP@ IDDEN FSTORE STORY LPLIBS TXT  OME BLK    SNAM!! PCRTN"" ## ICBM$$ DBAVAIL%% NAME&& MGFIL''  PERSONATE(( ORT)) SEMV** NC++  REMENTAL,, DEX-- F.. IT// PFILES00 UT11 SHIFENT22 TRAN33 TABLE44 RUDERS55 OCHAN66 77 PUFILEK88 TMLST99 JOBCTX:: ID;; NAME<< URNAL== KEY>> ?? MAP@@  LISTAA PADBB WCC FEFNDDD GENROUEE TSTROUFF LANDEVGG BLSHH CLII BROADJJ DBKK RIMGLL SMM  IBRARIESNN COO ENSEPP QQ RR SS MATCHTT NKSUU TBVV STWW XX YY ENERZZ [[ TERAL\\ KB]] NAM^^ OAD__ `` PSCfaa CALBINDbb NAMEcc SYMrdd  See UTHff gg Khh IDii Sjj Gkk ll ICALmm Onn NAMoo pp  Eqq TABrr WVERss UNStt RTuu  MACFOUNDvv ILDIRIww LFUN1xx  2yy NFACCzz ILE{{ || P}} STER~~ TCHA      ES BX  CHKFRAME EANING MBER ORY   RESID OD    ATTIGN EM IFY NAM ONEPOL S    REACE CHAR ENT  RIES FILE  S ORM ITEMS   JOB KEYS  MSG  NODS  PROC  QMGR  UE REGW SVCS PSCALL SGFND  OPENJ S  TCHENDM  R FND OU  ULTBK IVALS N           7 E  H S S ^ b f l w ~                     AMES POL  NSICRT BLANK    RDMSG CONTIG   UOUS EK k k  DEL  FOUND! LFLIB) REC" SEL# T$ MBX% WMAIL& XDRV' IST(  ENT  ' ) * W      PR) STACP* FREE  GALAXY  LOCAL+ , -  NEGATABLE UMERIC ODE.   /   0   NAME    S1   TICE PAGED" Z HYSET2 ICAL2  IC3 DAT4 IMG5 REF6 RES7 IDENT SHRADR  MPDRV8 IZED8 TANDARD9 DUNI9 YMVBND9   UMPARMK!!  VOLATILE"" XPADRV:## ZERO$$ ! %% }&& ''  (( )) ** OBJSRV;++ DS1<,, EDBC--  NE_ENABLED=.. PCOM>// 00 EN?11 IGN?22 JOB@33 RA44 B55 C66 D77 RE88 NDF99 TSYMVG:: ;; UTPUTH<< QUALI== P1VAJ>> AGE?? DYNL@@ SIZEMAA RAMNBB OCC ETERS DD ENPEE TQFF RGG ITYHH MSII TIDLJJ SSTKK WORDULL TAREAVMM HAVAILZNN OO FOUNDPP SPECQQ TBLWRR ERATORXSS TT FNMAPYUU MCONNVV  OLLDEVICEQWW REMOTEPXX OLTYPEYY  RTACCESSZZ GIVEN[[ ST\\ PP]] ACCESS^^ REV[__ INT\`` V=aa ]bb ^cc _dd `ee aff bgg hh ii jj DIRSUMckk LOCKdll MCEBemm GBLfnn MBXgoo OChpp ESSiqq TPSjrr DBss Sktt Tluu XYDBmvv SCOVRnww TSoxx HEADyy PROCzz WAPMp{{ TBLDIRq|| WDSYNCH}} QFILEr~~ UALs t IFIERS  ECTXu SPACEv UEw x OTAPRIV Ey R ?  AD50  TINGIMAGEz BS{ CP| VBUF} DACCX  PROXYREC EAD~   CP ER LDRIMG DEFINE F GICE LNOTE OBWt C MBROAD OTE VE WAIT NDEV EXISTS LOCK PAIR ORT Q SYM SERVE OURC PONSE SEC TART   TENSION  URNVALUE VOKE IGHTSDB  MAL, -      LY _EXIT DRVR RONVAX SSHARE OLLFORW OM SBNAM TBLD TTB ULESET OGNAM NMCR  SAVEDUMPY SET PEXC CANNEDINTRUDER S ECACC EX URITY   LECT F WGHTMOD RVER   SSION TPRV  VER HADLIC OW RE DWMEM MBLOCK EM GSD OWBUF PTS RD IMG RELO IGNAL LOT S OLICIT PACE LOWNED RVC TACKMEM RT TS  RING  TCOMU UBEXI SEC PACE CHACE PP BUS CHAR PB  U  TX DEV    IR OI> ELE NT      XT   FAC   ILE      ORM ID  NTRUDER JOB LOC MEM OD   EL  U NAM ODE      OBJ!!  ECT"" PAGZ##  TH$$ OOL%% ROXY&&  TM'' QMGR(( UE)) RQST** VN++ SEC,, YM-- .. THREAD=// ID00 USER11 22 33 44 55  R66 VERB77 OL88 MM99 YMBOL::  S;; << VECT== OPT>> SACT?? CLF@@ DISKAA GBLBB IPCCC LCKDD NAMEE PRVFF TPSGG TI xE [V=! NOT                                  !! "" ## $$ %% &&  ''  ((  ))  **  ++  ,,  --  ..  //  00  11  22  33  44  55  66  77  88  99 :: ;; << ==  >> ?? @@  AA  BB CC DD EE FF GG HH II JJ KK LL MM NN OO PP QQ RR SS TT UU VV WW XX YY ZZ [[ \\ ]] ^^ __ `` aa bb  cc dd ee ff  gg hh ii jj  kk ll mm nn oo pp qq rr ss tt uu vv ww xx yy zz {{ ||  }} ~~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`` Paa Pbb P cc Pdd Pee Pff Qgg Qhh Qii R jj Rkk Rll Rmm S nn S oo Spp Tqq Urr Uss Utt Uuu U vv Uww Vxx Vyy Vzz V{{ W|| W }} W~~ W W X X X X Y Y Y Y Y Z Z Z Z [ [ [  [ [ \ \ \  \ \ ] ] ]  ^ ^ ^ ^ ^ ^  _ _ _ _ ` ` ` ` `  ` ` ` a a a b b b b b c c c c d d d d e e e e e e f f f f  f f f g g g g g g h h h  h h h h h i i  i  i j j j j k k k l l  l l l m n n n n  n n n n o o  o p p p p  q q q q r r r  r r r s s  s s t t t  t    t   t   u   u   u  u v v  v  v v w w w x x x x y y y y z   z!! z"" z## {$$ {%% {&& {'' {(( |)) |** |++ |,, |-- }.. }// }00 }11 ~22 33 44 55 66 77 88 99 :: ;; << == >> ?? @@ AA BB CC DD EE FF  GG HH II JJ KK LL MM NN OO PP QQ RR SS TT UU VV WW XX YY ZZ [[ \\ ]] ^^ __ `` aa bb cc  dd ee ff gg hh ii  jj kk ll mm nn oo pp qq rr  ss tt uu vv ww  xx yy zz {{ ||  }}  ~~                                                                                                                                                                                                      !! "" ## $$  %% && '' (( ))  **  ++ ,, -- .. // 00 11  22 33 44 55  66  77  88 99 :: ;; << == >> ?? @@ AA BB CC DD EE FF GG HH II JJ KK LL MM NN OO PP QQ  RR SS TT UU  VV WW XX YY ZZ [[ \\ ]] ^^ __ `` aa bb cc dd ee ff gg hh ii jj kk ll mm nn oo pp qq rr ss tt  uu vv ww xx yy zz {{ || }} ~~                                                                                                                                                                                                                 !! ""  ## $$ %% && '' (( ))  **  ++ ,, -- .. // 00  11 22  33 44 55 66 77 88  99  ::  ;; <<  == >> ?? @@ AA  BB CC DD EE  FF GG HH II JJ  KK LL MM NN OO  PP QQ RR  SS TT UU   NSICRT BLANK    RDMSG CONTIG   UOUS EK k k  DEL  FOUND! LFLIB) REC" SEL# T$ MBX% WMAIL& XDRV' IST(  ENT  ' ) * W      PR) STACP* FREE  GALAXY  LOCAL+ , -  NEGATABLE UMERIC ODE.   /   0   NAME    S1   TICE PAGED" Z HYSET2 ICAL2  IC3 DAT4 IMG5 REF6 RES7 IDENT SHRADR  MPDRV8 IZED8 TANDARD9 DUNI9 YMVBND9   UMPARMK!!  VOLATILE"" XPADRV:## ZERO$$ ! %% }&& ''  (( )) ** OBJSRV;++ DS1<,, EDBC--  NE_ENABLED=.. PCOM>// 00 EN?11 IGN?22 JOB@33 RA44 B55 C66 D77 RE88 NDF99 TSYMVG:: ;; UTPUTH<< QUALI== P1VAJ>> AGE?? DYNL@@ SIZEMAA RAMNBB OCC ETERS DD ENPEE TQFF RGG ITYHH MSII TIDLJJ SSTKK WORDULL TAREAVMM HAVAILZNN OO FOUNDPP SPECQQ TBLWRR ERATORXSS TT FNMAPYUU MCONNVV  OLLDEVICEQWW REMOTEPXX OLTYPEYY  RTACCESSZZ GIVEN[[ ST\\ PP]] ACCESS^^ REV[__ INT\`` V=aa ]bb ^cc _dd `ee aff bgg hh ii jj DIRSUMckk LOCKdll MCEBemm GBLfnn MBXgoo OChpp ESSiqq TPSjrr DBss Sktt Tluu XYDBmvv SCOVRnww TSoxx HEADyy PROCzz WAPMp{{ TBLDIRq|| WDSYNCH}} QFILEr~~ UALs t IFIERS  ECTXu SPACEv UEw x OTAPRIV Ey R ?  AD50  TINGIMAGEz BS{ CP| VBUF} DACCX  PROXYREC EAD~   CP ER LDRIMG DEFINE F GICE LNOTE OBWt C MBROAD OTE VE WAIT NDEV EXISTS LOCK PAIR ORT Q SYM SERVE OURC PONSE SEC TART   TENSION  URNVALUE VOKE IGHTSDB  MAL, -      LY _EXIT DRVR RONVAX SSHARE OLLFORW OM SBNAM TBLD TTB ULESET OGNAM NMCR  SAVEDUMPY SET PEXC CANNEDINTRUDER S ECACC EX URITY   LECT F WGHTMOD RVER   SSION TPRV  VER HADLIC OW RE DWMEM MBLOCK EM GSD OWBUF PTS RD IMG RELO IGNAL LOT S OLICIT PACE LOWNED RVC TACKMEM RT TS  RING  TCOMU UBEXI SEC PACE CHACE PP BUS CHAR PB  U  TX DEV    IR OI> ELE NT      XT   FAC   ILE      ORM ID  NTRUDER JOB LOC MEM OD   EL  U NAM ODE      OBJ!!  ECT"" PAGZ##  TH$$ OOL%% ROXY&&  TM'' QMGR(( UE)) RQST** VN++ SEC,, YM-- .. THREAD=// ID00 USER11 22 33 44 55  R66 VERB77 OL88 MM99 YMBOL::  S;; << VECT== OPT>> SACT?? CLF@@ DISKAA GBLBB IPCCC LCKDD NAMEE PRVFF TPSGG TI xE=!}|!=! NOT1STVOL =!21BITSz=! 64DEVFUNC[=!ACLU =!FUNCv=!LLPRIV =!REQUE =!SET =! YM  =!PHADUMP =! EOM =!NUM =!NLMB=! SI=! =!PEOP=! RGETCRED?=!RAY=!SCII=! =!HRIMG=!SIGN=!UMING=!TBOT=!ERM=!UTHDB=!ORIZED =!BKBLOCK=!OOCAP=!CLASS=!ITABLE  =!MPLT"!!=! OM#""=!DAT%##=! PSAVESETX$$=!REC$%%=!NNECT&&=!PIED%''=! &((=! '))=!_RETRY(**=!REATOR)++=! TX*,,=!DDBDDB+--=!ECSTRG,..=! -//=!FINABLE.00=! L11=!ETED/22=! IR033=!SCON144=! K255=! M366=!ONE477=! E88=!LFFILE*99=!MSK::=!NABLED;;=!OPT5<<=! 6===!UFOPR7>>=! 8??=! RM9@@=! RORKEYWORD:AA=! SBB=! CC=! DD=!TROUEE=!XIST;FF=!F11ODS5GG=! 64\HH=!CBFCB<II=!WCB=JJ=!PWCB>KK=!ILDEV?LL=!LAGOPT@MM=! OUANN=! NDBOO=! CPP=! DQQ=! ]RR=! RESS=!UNCOBJTT=!GENDEVFUU=!HENGVV=!XVALWW=!INGXX=!LPLIBHYY=!ICESZZ=!DFMTI[[=! XJ\\=! FICATION=]]=! ^^=! EDt__=! ``=! aa=! bb=! Ycc=! dd=! Kee=!MEOUTff=!GLIB,gg=! Lhh=! PMii=! Njj=! Okk=! Pll=! LEMENTEDRmm=!ZONRULOnn=!NACC}oo=!NIFSpp=! Tqq=!IMAGEVrr=!MACROWss=! Xtt=!PHYSYuu=! RSRVLIST[vv=!STALww=!  L\xx=! ]yy=!TBLSZ^zz=!RPAQB_{{=!JNLFIL`||=!OURNALa}}=! b~~=!LABELc=!  MTd=!CLTRM!=!EARNINGe=!GLISOPf=! g=! KBh=!OADEDj=!CKEDk=! l=!MAPPED =! EANINGFULm=! ODn=! EMo=!IFIABLEp=!  EDq=!UNTEDr=!PMBXs=!NAMt=!TLMTLu=!NATIVEv=! EGw=!TDEVx=!OCNVRT^=!UMBERy=! z=!CAP{=!ERIC=!OBJLIB/=! |=! }=!DS2~=! =!FFERED=!RIGIN=!UTITEM.=!PAGFIL=!RAM=!STED=!TADR=! CB=! ERMITTED`=!MTIDX=!RESOPT=!INTED=!SECOPT=! =! T=!HARE=!QUEUED=! O=!RAN=! =! =! =!EADIN=! G=!LVOL=!NAMED=!PAIREDV=!FC822N=!MSOUT=!QCB=!ULUCB=!VTVCB=!SAMEBUF=!DEV=! =!VED=!SET=!ECDB=! Q=! T=! =!HDWDEV=! VU=!RADR=!IMG=! =!SYMVEC=!TBL=!IGNED=!PLADDR=!QDEV=!TARTEDR=! =!RCAP=!UC1=!UBCLASS=! P=!PORT.=!  ED=! =!YSTEM=!TRANSD=!UCBIRP=!RVT=!UCB=!WCB=!ICFMT=!QPORT=!VALID=! =!LEN=!XEOM=!GSD=!HDR=!IMG=!CBUCB=!ECTORED=!YET=!OLSET=! =!VPVCB=!WCBIRP=!WCB=!ITHCONN=!YET=!IMP=!_ADDED=! VAILABLE=!_TRM=! =!IMPLQ=! EMENTED=! N_DEVICEU=!PRIVATEZ=!LOADEDi=!MAPPED=! PROCESS_VA_=!STARTED=!UNL=!SABLE=!UNLOAD=!SHELVE=! =!PDATE=!GRADE=!SERNAME  =!   =!PASS  =!SPEC  =!   =!RWCS=!VALDONE=! =!PRS=! U=! E=! =! =!CFND=!GIVEN=!ECTOR=! R=!IRMEM=!OLACC=!DATA=!ESC>=! =!PRO=!UMES  =!UID!!=! W""=! (##=! K$$=! h%%=! k&&=! ''=! ((=! ))=! **=! ++=! ,,=! --=!ILD..=! //=!NDOW00=!ORLD11=!RITEE22=! 33=! 44=! HD55=! R66=! T77=!ACCa88=!ZERO99=! ::=!_ARGS;;=!CHADIS<<=! FORCED_ERROR ===!MORMSG>>=! PAGED_ISDSK??=!OOLZ@@=!RECORDAA=!SHAREBB=! CC=! UCH_IMAGEDD=! PARTYEE=! ORTFF=! YSTEM_CONFIGGG=! WINASSOCHH=! RKII=! PAG_BAP_ JJ=! KKK=! RULL=!SADDRMM=! FNN=!NAME6OO=!TPPDPP=! TDQQ=!UDFENVSRR=!LSYMSSS=!SYMS:TT=! UU=!LFILVV=!IDXWW=! LXX=! /YY=! ?ZZ=! C[[=! \ \\=! ]]=! ^^=! __=! ``=! aa=! bb=!FILEcc=!PIPEdd=! RIee=! Vff=!STRINGgg=!VALUE/hh=!_HW_IDii=!PTRERRjj=!SAVESETkk=!MBER ll=! mm=! nn=! oo=! pp=! qq=! rr=! ss=!  tt=!  uu=!  vv=! ww=! xx=! yy=!  zz=! {{=!  ||=! }}=! ~~=! =! =! =! =! =!  =! =! =! =! =! =! =! =! =! =!  =!  =! =!  =!  =!  =! !=! !=! " =! #=! $=! &=! &=! &=! '=! (=! )=! )=! *=! ,=! ,=! ,=! /=! 0=! 1=! 1 =! 3=! 4=! 6=! 7=! 7=! 8=! 8=! :=! :=! :=! ;=! ;=! ;=! <=! >=! >=! >=! ?=! ?=! ?=! @ =! @ =! @=! A=! B=! C=! D=! D =! D=! E =! E=! F=! F =! F =! G=! G =! G=! G=! G=! H=! I=! I=! J=! J=! J=! K=! K=! K=! K=! L=! L=! L=! M=! M=! M=! M=! N =! N=! N=! O =! O=! P=! S=! T =! T=! U=! V=! V=! V=! W=! W=! W =! W=! X =! Y=! Y=! Z=! [=! [=! \=! ]=! ]=! ^ =! ^=! ^=! _=! _=! `=! `=! `=! `=! a =! a =! a=! b=! c=! c=! c  =! d  =! d  =! e  =! e  =! e=! f=! g=! h=! i=! j=! l=! m =! m=! n=! n=! n=! o=! p=! p=! q=! q=! q =! r  =! s!!=! s""=! s##=! t$$=! t %%=! t&&=! u''=! u((=! u))=! v**=! v++=! w,,=! w--=! w..=! x//=! x00=! x11=! x22=! y33=! y44=! z55=! z66=! z 77=! z 88=! z99=! {::=! { ;;=! { <<=! {===! |>>=! | ??=! | @@=! |AA=! }BB=! } CC=! }DD=! ~EE=! ~FF=! ~GG=! ~ HH=! ~II=! ~JJ=! KK=! LL=! MM=! NN=! OO=! PP=! QQ=! RR=! SS=! TT=! UU=! VV=! WW=! XX=! YY=! ZZ=! [[=! \\=! ]]=! ^^=!  __=! ``=! aa=! bb=! cc=! dd=! ee=! ff=! gg=! hh=! ii=! jj=! kk=! ll=! mm=! nn=! oo=! pp=! qq=! rr=! ss=! tt=! uu=!  vv=! ww=! xx=!  yy=! zz=! {{=! ||=! }}=! ~~=! =! =! =!  =! =! =! =! =! =! =! =!  =! =!  =! =! =! =! =! =! =!  =! =! =! =! =! =! =! =! =! =! =! =! =!  =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =!  =! =! =! =! =! =! =!  =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =!  =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =!  =! =! =! =! =! =! =! =! =!  =! =! =! =! =! =!  =! =! =!   =!   =!   =!   =!   =! =! =! =! =! =! =! =! =! =! =! =! =!  =! =! =! =! =! =!    =! !!=! ""=! ##=! $$=! %%=! &&=! ''=! ((=!  ))=! **=! ++=! ,,=!  --=! ..=! //=! 00=! 11=! 22=! 33=! 44=! 55=! 66=!  77=!  88=! 99=! ::=! ;;=!  <<=!  ===! >>=! ??=! @@=! AA=!  BB=! CC=! DD=! EE=! FF=! GG=! HH=! II=! JJ=! KK=! LL=! MM=!  NN=! OO=! PP=! QQ=! RR=! SS=! TT=!  UU=! VV=! WW=! XX=! YY=! ZZ=! [[=! \\=! ]]=!  ^^=! __=!  ``=! aa=! bb=!  cc=! dd=! ee=! ff=! gg=! hh=! ii=! jj=! kk=! ll=! mm=! nn=! oo=!  pp=! qq=! rr=! ss=! tt=! uu=! vv=! ww=! xx=! yy=! S zz=! `{{=! ~||=! }}=! ~~=! =! =!  =!  =! ELEMENTS=!RIC=! G=! {=! =! =! =!  =! =! =! =! =! =! ALy=! z=! =!VTCVT=!DMP=!PRC=!SKP=!TRN=! WR=!OPRNDS=!RECS=!TRUNC=!VAL=!_KEY=! VR=!OPRFAI=! XR=!TJNLFIL=!OBJECT=! =! =!  =! =! =!  =! !=! $=! $ =! &=! ( =! )=! *=! - =! /=! 3=! 5=! 7=! ;=! <=! ==! > =! B=! F=! K=! K=! N=! Q=! T=! Z=! ]=! ^=! n=! q=! y=! z=! |=! }=! =! =! =! =! =! =! =! =!  =! =! =!  =! =! =! =! =! =! =! =!  =! =! =! =!  =! =! =! =! =! =!  =! =!LOCKED=! NOTLOCKED=!SKPF=! WITHLINK=! _HANDLE_INV=!SOLETE=! =! =! #=! =! =! =!  =! =!PASSALL=! SERVERDB=!TAIN7 =! I =! U=! {=! }=!  =! =! ED=!ING=!  =! D=! G =! M =! r =! =! =! =!   =!CCLUDED  =! UR<  =! =  =!   =!RED =! =!  =! =!  =! ! =! H =! H=! N=! Q=! S=! k =! m =! n=! o=! p=! v=! w=! w  =! ~ !!=! ""=! ##=! $$=! %%=! &&=! ''=! ((=! ))=!  **=! ++=! ,,=! --=!  ..=! //=!  00=! S11=!TAL22=!WORD33=!VNOTFND44=!DB_NAC55=! D66=! S77=!  88=! <99=! ::=! ;;=! <<=! ===!2COMPAT>>=!SAVE ??=!5CONV@@=!LOSSAA=!EDBUPDDBB=! FF CC=! 8DD=! SEE=! FF=! GG=! HH=! II=! JJ=! KK=! LL=!  MM=!  NN=!ERED*OO=! PP=! QQ=!HOOK RR=!ICIALSS=!LINETT=! UU=!  VV=! `WW=! XX=! YY=! ZZ=! [[=!SET\\=! ]]=! ^^=! __=! ``=! aa=! bb=! cc=! dd=! ee=! ff=! gg=! /hh=! 6ii=! ;jj=! >kk=! ?ll=! Vmm=! bnn=! boo=! cpp=! cqq=! drr=! pss=! tt=! uu=! vv=! ww=! xx=! yy=! zz=!NOTEQx{{=! Sx||=! _TOO_BIGd}}=! _NOTBLKALGNb~~=!PAGALGN=! c=!K_ALK =!DEL =! UP=!IDX=!LIM=! NOCURTID=! P=!RLK=! NF=! RL=!ULK=!WAT=! LD=! =! +=! ,=! -=! .=! /=! 0=! 1=! 2=! 3=! 3=! 4=! 5=! G=! H=! n=! o=!  =! =! =! =! =!EST=!  =! HM=!INSCHK=!LIBRARY=!MISMCH=!PURGE=! RM=!TAB=!VALCHK=!MIT^=! w=!NCE=! =!OMD=! DELRECLIST =! E =! =!  =! =! =! !=! "=! &=! 8=! 8=! ==! B=! E=! K=! K=! L =! M=! Q=! W =! m =! o=! v=! v=! z=! {=! |=! }=! ~ =! ~ =!  =! =!  =!  =! =!  =! =! =!  =! =!  =! =!  =!  =!  =! =! =! =! =! =!  =! =! =!DELTIM!=!ENTQUE"=!F11DEV#=!OUT$=!IMGDEV%=!LEARN&=!PHYDEV'=! RR(=! S=!ELECT)=!VAL*=!FADDERR+=!BUFOVF,=!CONERR-=!REERR.=!INVREC/=!MAXEX0=!ODERR1=!NPDAEX2=!DNE3=!OPNERR4=!REMERR5=!HOOK6=!LEVL7=!INE=! =! =! =! =! Y =!  =!  =! =!    =!    =!    =! #  =! '  =! /=! 1=! 7=! : =! < =! C=! C=! M=! M=! P=! Q=! V =! \=! q=! t=! ~ =! =! =!   =!  !!=!  ""=!  ##=!  $$=!  %%=! &&=! ''=!  ((=!  ))=! **=!  ++=! ,,=! --=! ..=! //=! 00=!  11=! 22=! 33=! 44=! 55=!  66=! 77=! 88=! 99=! ::=!  ;;=! <<=! ===! >>=! ??=! @@=! AA=!OPRBB=!OROFF8CC=! VF9DD=! PA0CLERREE=! CF FF=! mGG=! HH=! $LOGFILE_II=! ENABLEJJ=! OPA0_CLASSESKK=! ENABLELL=!CUS:MM=!DEC;NN=!ODE0 OO=! :PP=! ;QQ=! ORR=! XSS=! cTT=! UU=!  VV=!  WW=! S" XX=! M>YY=! BZZ=! [[=! \\=! ]]=! ^^=! __=! ``=! aa=! bb=!DEF" cc=!  dd=!EJBCMBX<ee=! Nff=! gg=!  hh=! ii=! ) jj=! *kk=! 2 ll=! 4mm=! 9nn=! : oo=! @pp=! Aqq=! Irr=! Kss=! \tt=! zuu=! {vv=! }ww=! xx=!  yy=! zz=! {{=! ||=! }}=! ~~=! =! =! =! =! =! =! =!  =!  =!  =! =!  =! =! =!  =!  =! =! =! =! =! =! =! E|!S!|!OPEN|! |!  64DEVFUNC[=!ACLU =!FUNCv=!LLPRIV =!REQUE =!SET =! YM  =!PHADUMP =! EOM =!NUM =!NLMB=! SI=! =!PEOP=! RGETCRED?=!RAY=!SCII=! =!HRIMG=!SIGN=!UMING=!TBOT=!ERM=!UTHDB=!ORIZED =!BKBLOCK=!OOCAP=!CLASS=!ITABLE  =!MPLT"!!=! OM#""=!DAT%##=! PSAVESETX$$=!REC$%%=!NNECT&&=!PIED%''=! &((=! '))=!_RETRY(**=!REATOR)++=! TX*,,=!DDBDDB+--=!ECSTRG,..=! -//=!FINABLE.00=! L11=!ETED/22=! IR033=!SCON144=! K255=! M366=!ONE477=! E88=!LFFILE*99=!MSK::=!NABLED;;=!OPT5<<=! 6===!UFOPR7>>=! 8??=! RM9@@=! RORKEYWORD:AA=! SBB=! CC=! DD=!TROUEE=!XIST;FF=!F11ODS5GG=! 64\HH=!CBFCB<II=!WCB=JJ=!PWCB>KK=!ILDEV?LL=!LAGOPT@MM=! OUANN=! NDBOO=! CPP=! DQQ=! ]RR=! RESS=!UNCOBJTT=!GENDEVFUU=!HENGVV=!XVALWW=!INGXX=!LPLIBHYY=!ICESZZ=!DFMTI[[=! XJ\\=! FICATION=]]=! ^^=! EDt__=! ``=! aa=! bb=! Ycc=! dd=! Kee=!MEOUTff=!GLIB,gg=! Lhh=! PMii=! Njj=! Okk=! Pll=! LEMENTEDRmm=!ZONRULOnn=!NACC}oo=!NIFSpp=! Tqq=!IMAGEVrr=!MACROWss=! Xtt=!PHYSYuu=! RSRVLIST[vv=!STALww=!  L\xx=! ]yy=!TBLSZ^zz=!RPAQB_{{=!JNLFIL`||=!OURNALa}}=! b~~=!LABELc=!  MTd=!CLTRM!=!EARNINGe=!GLISOPf=! g=! KBh=!OADEDj=!CKEDk=! l=!MAPPED =! EANINGFULm=! ODn=! EMo=!IFIABLEp=!  EDq=!UNTEDr=!PMBXs=!NAMt=!TLMTLu=!NATIVEv=! EGw=!TDEVx=!OCNVRT^=!UMBERy=! z=!CAP{=!ERIC=!OBJLIB/=! |=! }=!DS2~=! =!FFERED=!RIGIN=!UTITEM.=!PAGFIL=!RAM=!STED=!TADR=! CB=! ERMITTED`=!MTIDX=!RESOPT=!INTED=!SECOPT=! =! T=!HARE=!QUEUED=! O=!RAN=! =! =! =!EADIN=! G=!LVOL=!NAMED=!PAIREDV=!FC822N=!MSOUT=!QCB=!ULUCB=!VTVCB=!SAMEBUF=!DEV=! =!VED=!SET=!ECDB=! Q=! T=! =!HDWDEV=! VU=!RADR=!IMG=! =!SYMVEC=!TBL=!IGNED=!PLADDR=!QDEV=!TARTEDR=! =!RCAP=!UC1=!UBCLASS=! P=!PORT.=!  ED=! =!YSTEM=!TRANSD=!UCBIRP=!RVT=!UCB=!WCB=!ICFMT=!QPORT=!VALID=! =!LEN=!XEOM=!GSD=!HDR=!IMG=!CBUCB=!ECTORED=!YET=!OLSET=! =!VPVCB=!WCBIRP=!WCB=!ITHCONN=!YET=!IMP=!_ADDED=! VAILABLE=!_TRM=! =!IMPLQ=! EMENTED=! N_DEVICEU=!PRIVATEZ=!LOADEDi=!MAPPED=! PROCESS_VA_=!STARTED=!UNL=!SABLE=!UNLOAD=!SHELVE=! =!PDATE=!GRADE=!SERNAME  =!   =!PASS  =!SPEC  =!   =!RWCS=!VALDONE=! =!PRS=! U=! E=! =! =!CFND=!GIVEN=!ECTOR=! R=!IRMEM=!OLACC=!DATA=!ESC>=! =!PRO=!UMES  =!UID!!=! W""=! (##=! K$$=! h%%=! k&&=! ''=! ((=! ))=! **=! ++=! ,,=! --=!ILD..=! //=!NDOW00=!ORLD11=!RITEE22=! 33=! 44=! HD55=! R66=! T77=!ACCa88=!ZERO99=! ::=!_ARGS;;=!CHADIS<<=! FORCED_ERROR ===!MORMSG>>=! PAGED_ISDSK??=!OOLZ@@=!RECORDAA=!SHAREBB=! CC=! UCH_IMAGEDD=! PARTYEE=! ORTFF=! YSTEM_CONFIGGG=! WINASSOCHH=! RKII=! PAG_BAP_ JJ=! KKK=! RULL=!SADDRMM=! FNN=!NAME6OO=!TPPDPP=! TDQQ=!UDFENVSRR=!LSYMSSS=!SYMS:TT=! UU=!LFILVV=!IDXWW=! LXX=! /YY=! ?ZZ=! C[[=! \ \\=! ]]=! ^^=! __=! ``=! aa=! bb=!FILEcc=!PIPEdd=! RIee=! Vff=!STRINGgg=!VALUE/hh=!_HW_IDii=!PTRERRjj=!SAVESETkk=!MBER ll=! mm=! nn=! oo=! pp=! qq=! rr=! ss=!  tt=!  uu=!  vv=! ww=! xx=! yy=!  zz=! {{=!  ||=! }}=! ~~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`=! `=! `=! `=! a =! a =! a=! b=! c=! c=! c  =! d  =! d  =! e  =! e  =! e=! f=! g=! h=! i=! j=! l=! m =! m=! n=! n=! n=! o=! p=! p=! q=! q=! q =! r  =! s!!=! s""=! s##=! t$$=! t %%=! t&&=! u''=! u((=! u))=! v**=! v++=! w,,=! w--=! w..=! x//=! x00=! x11=! x22=! y33=! y44=! z55=! z66=! z 77=! z 88=! z99=! {::=! { ;;=! { <<=! {===! |>>=! | ??=! | @@=! |AA=! }BB=! } CC=! }DD=! ~EE=! ~FF=! ~GG=! ~ HH=! ~II=! ~JJ=! KK=! LL=! MM=! NN=! OO=! PP=! QQ=! RR=! SS=! TT=! UU=! VV=! WW=! XX=! YY=! ZZ=! [[=! \\=! ]]=! ^^=!  __=! ``=! aa=! bb=! cc=! dd=! ee=! ff=! gg=! hh=! ii=! jj=! kk=! ll=! mm=! nn=! oo=! pp=! qq=! rr=! ss=! tt=! uu=!  vv=! ww=! xx=!  yy=! zz=! {{=! ||=! }}=! ~~=! =! =! =!  =! =! =! =! =! =! =! =!  =! =!  =! =! =! =! =! =! =!  =! =! =! =! =! =! =! =! =! =! =! =! =!  =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =!  =! =! =! =! =! =! =!  =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =!  =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =! =!  =! =! =! =! =! =! =! =! =!  =! =! =! =! =! =!  =! =! =!   =!   =!   =!   =!   =! =! =! =! =! =! =! =! =! =! =! =! =!  =! =! =! =! =! =!    =! !!=! ""=! ##=! $$=! %%=! &&=! ''=! ((=!  ))=! **=! ++=! ,,=!  --=! ..=! //=! 00=! 11=! 22=! 33=! 44=! 55=! 66=!  77=!  88=! 99=! ::=! ;;=!  <<=!  ===! >>=! ??=! @@=! AA=!  BB=! CC=! DD=! EE=! FF=! GG=! HH=! II=! JJ=! KK=! LL=! MM=!  NN=! OO=! PP=! QQ=! RR=! SS=! TT=!  UU=! VV=! WW=! XX=! YY=! ZZ=! [[=! \\=! ]]=!  ^^=! __=!  ``=! aa=! bb=!  cc=! dd=! ee=! ff=! gg=! hh=! ii=! jj=! kk=! ll=! mm=! nn=! oo=!  pp=! qq=! rr=! ss=! tt=! uu=! vv=! ww=! xx=! yy=! S zz=! `{{=! ~||=! }}=! ~~=! =! =!  =!  =! ELEMENTS=!RIC=! G=! {=! =! =! =!  =! =! =! =! =! =! ALy=! z=! =!VTCVT=!DMP=!PRC=!SKP=!TRN=! WR=!OPRNDS=!RECS=!TRUNC=!VAL=!_KEY=! VR=!OPRFAI=! XR=!TJNLFIL=!OBJECT=! =! =!  =! =! =!  =! !=! $=! $ =! &=! ( =! )=! *=! - =! /=! 3=! 5=! 7=! ;=! <=! ==! > =! B=! F=! K=! K=! N=! Q=! T=! Z=! ]=! ^=! n=! q=! y=! z=! |=! }=! =! =! =! =! =! =! =! =!  =! =! =!  =! =! =! =! =! =! =! =!  =! =! =! =!  =! =! =! =! =! =!  =! =!LOCKED=! NOTLOCKED=!SKPF=! WITHLINK=! _HANDLE_INV=!SOLETE=! =! =! #=! =! =! =!  =! =!PASSALL=! SERVERDB=!TAIN7 =! I =! U=! {=! }=!  =! =! ED=!ING=!  =! D=! G =! M =! r =! =! =! =!   =!CCLUDED  =! UR<  =! =  =!   =!RED =! =!  =! =!  =! ! =! H =! H=! N=! Q=! S=! k =! m =! n=! o=! p=! v=! w=! w  =! ~ !!=! ""=! ##=! $$=! %%=! &&=! ''=! ((=! ))=!  **=! ++=! ,,=! --=!  ..=! //=!  00=! S11=!TAL22=!WORD33=!VNOTFND44=!DB_NAC55=! D66=! S77=!  88=! <99=! ::=! ;;=! <<=! ===!2COMPAT>>=!SAVE ??=!5CONV@@=!LOSSAA=!EDBUPDDBB=! FF CC=! 8DD=! SEE=! FF=! GG=! HH=! II=! JJ=! KK=! LL=!  MM=!  NN=!ERED*OO=! PP=! QQ=!HOOK RR=!ICIALSS=!LINETT=! UU=!  VV=! `WW=! XX=! YY=! ZZ=! [[=!SET\\=! ]]=! ^^=! __=! ``=! aa=! bb=! cc=! dd=! ee=! ff=! gg=! /hh=! 6ii=! ;jj=! >kk=! ?ll=! Vmm=! bnn=! boo=! cpp=! cqq=! drr=! pss=! tt=! uu=! vv=! ww=! xx=! yy=! zz=!NOTEQx{{=! Sx||=! _TOO_BIGd}}=! _NOTBLKALGNb~~=!PAGALGN=! c=!K_ALK =!DEL =! UP=!IDX=!LIM=! NOCURTID=! P=!RLK=! NF=! RL=!ULK=!WAT=! LD=! =! +=! ,=! -=! .=! /=! 0=! 1=! 2=! 3=! 3=! 4=! 5=! G=! H=! n=! o=!  =! =! =! =! =!EST=!  =! HM=!INSCHK=!LIBRARY=!MISMCH=!PURGE=! RM=!TAB=!VALCHK=!MIT^=! w=!NCE=! =!OMD=! DELRECLIST =! E =! =!  =! =! =! !=! "=! &=! 8=! 8=! ==! B=! E=! K=! K=! L =! M=! Q=! W =! m =! o=! v=! v=! z=! {=! |=! }=! ~ =! ~ =!  =! =!  =!  =! =!  =! =! =!  =! =!  =! =!  =!  =!  =! =! =! =! =! =!  =! =! =!DELTIM!=!ENTQUE"=!F11DEV#=!OUT$=!IMGDEV%=!LEARN&=!PHYDEV'=! RR(=! S=!ELECT)=!VAL*=!FADDERR+=!BUFOVF,=!CONERR-=!REERR.=!INVREC/=!MAXEX0=!ODERR1=!NPDAEX2=!DNE3=!OPNERR4=!REMERR5=!HOOK6=!LEVL7=!INE=! =! =! =! =! Y =!  =!  =! =!    =!    =!    =! #  =! '  =! /=! 1=! 7=! : =! < =! C=! C=! M=! M=! P=! Q=! V =! \=! q=! t=! ~ =! =! =!   =!  !!=!  ""=!  ##=!  $$=!  %%=! &&=! ''=!  ((=!  ))=! **=!  ++=! ,,=! --=! ..=! //=! 00=!  11=! 22=! 33=! 44=! 55=!  66=! 77=! 88=! 99=! ::=!  ;;=! <<=! ===! >>=! ??=! @@=! AA=!OPRBB=!OROFF8CC=! VF9DD=! PA0CLERREE=! CF FF=! mGG=! HH=! $LOGFILE_II=! ENABLEJJ=! OPA0_CLASSESKK=! ENABLELL=!CUS:MM=!DEC;NN=!ODE0 OO=! :PP=! ;QQ=! ORR=! XSS=! cTT=! UU=!  VV=!  WW=! S" XX=! M>YY=! BZZ=! [[=! \\=! ]]=! ^^=! __=! ``=! aa=! bb=!DEF" cc=!  dd=!EJBCMBX<ee=! Nff=! gg=!  hh=! ii=! ) jj=! *kk=! 2 ll=! 4mm=! 9nn=! : oo=! @pp=! Aqq=! Irr=! Kss=! \tt=! zuu=! {vv=! }ww=! xx=!  yy=! zz=! {{=! ||=! }}=! ~~=! =! =! =! =! =! =! =!  =!  =!  =! =!  =! =! =!  =!  =! =! =! =! =! =! =! E!}!! OPENAIJERR=!BIJERR>!TMAP?!DIC@! RA! B! C! ED !  !  ! $ ! R  ! \ ! u ! !  ! ! ! ! ! ! RRD! E! XCF!FAILG! ! ! DLH!ILEI! !  RRJ !OREIGNK!!! INL""! M##! N$$! O%%! P&&! Q''! R((! S))! **!DEXT++! G ,,!  --!  ..!  //! 00! "11! '22! 333! 444! <55! =66! >77! ?88! @99! A::! B;;! C<<! D==! E>>! F??! G@@! HAA! IBB! JCC! JDD! KEE! LFF! LGG! LHH! MII! MJJ! NKK! NLL! OMM! ONN! OOO! PPP! QQQ! RRR! SSS! STT! TUU! UVV! VWW! WXX! XYY! YZZ! Z[[! [\\! e]]! ^^! __! ``! aa! bb! cc! dd!  ee! ff! gg! hh! ii! jj! kk! ll! mm! nn! oo!  pp! qq!  rr! ss! tt!OUTUuu! Vvv! Www! Xxx! Yyy! ezz! {{! ||! }}!QUOTAZ~~!UAF[!VIRTUAL\! MS! ! ! ! ! ! (! S! V! Y! d! e! v! ! ! ! ! ! ! RB! C! D! `! !ABORT]! ND ! ! ! ! ! 8! F! q! r! s! z! ! !  ! ! ! !  !  !  ! ! S7! 8! [ ! ! ! !SSIST^! TE! D}!ING ! !! C! D! L! M! m! ! ! ON! ! ! ! ! ! ! ! ! ! ! ! !  !  !  ! ! ! !  !  !  !  ! ! ! " ! # ! #! $! % ! %! %! %! &! & ! &! '! *! +! ,! - ! 0! 1! 1! 2! 2! 2! 5! 6 ! =! @! @! B! B! C! F! G! G! N! N! P! R! U! V! W! X! Y ! Y! ^! ^! ^! `! `! a  ! a  ! b  ! b  ! b  ! c! c! d! e! e! e! f! f! g ! g! g! h! h! i! p! p! r ! s ! s  ! v!!! x ""! y##! z$$! {%%! }&&! ~''! ~((! ))! **! ++! ,,! --! ..! //! 00! 11! 22! 33! 44! 55! 66! 77! 88! 99! ::! ;;! <<! ==! >>! ??!  @@! AA! BB! CC! DD! EE! FF!  GG! HH! II! JJ! KK! LL! MM! NN! OO! PP! QQ! RR!  SS!  TT! UU! VV! WW! XX! YY! ZZ! [[! \\! ]]!  ^^! __! ``! aa! bb! cc! dd! ee! ff! gg! hh! ii! jj! kk! ll! mm! nn! oo! pp! qq! rr! ss! tt!  uu!  vv! ww! xx! yy!  S%zz! V{{! x||! }}! ~~! !  ! OR!  ! !  ! !  ! 1! @! A! A! B! E! G! X! ]! ]! ^! _! b! i! j! m! q! t! t! v! x! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !  !  S[ ! !FAIL_!REQ`!SPECa! TSb!FAILEDG!INCOMPL@! c!PROGd!NFILERRO! OTPERDOSe! F11f!SUPg! h!RABORTi! j!EPLk! Yl! m!HDRDETn!INPo!SETp!NDLNGq!SYNXr! s!OTIFt!QSTu!CANv!SERVERw!NDERRx!SPECLBLy!YNTAXz!TALTFNL!RGMIS{! !BASNOT|! ! IGNALPHA}!ELF!SHR~! ! YS!VAX!NVKITH! ON !  ! ! &! 2! 5! 6! 9! <! @! F! F! G! H! L! O! S! Y! \! a! e! f! f! g! g! h! i! i ! i! k ! l ! l! n ! q ! u ! x! |! }! ~! ! ! ! ! ! ! ! !   !   !   !    !   ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !  ! AL8  ! Y!!! ""! ##! S $$! %%!  &&! ''! ((! 5))! 7**! T++! Y,,! Z--! [..! ] //! a00! i11! n22! o33! {44! 55! 66! 77! 88! 99! ::! ;;! <<! ==! >>! ??! @@! AA! BB! CC! DD! EE! FF! GG!  HH!SDNOTII!LINJJ! NOTSUPPORT/KK!REFILL!SYNERRMM! NN!TYPE2OO!VALERRPP! QQ! _WBM_MERGE[RR! \SS! RBwTT!TOOBIGUU!DERVV! WW! ^XX! jYY! yZZ! z[[! ~\\! ]]! ^^! __! ``!ING~aa! bb!_ERRORcc! Gdd! ANIZATION*ee! jff! gg! hh!IENTED?ii!GINjj! kk! ll! AL)mm! *nn! +oo! -pp! .qq! 1rr! ss! tt!TEDuu! PHAN_BRANCHvv!NLNKGgww! SCTOOLONxx!LDEVyy! zz! {{! ||!PRT}}!THER ~~! /! 7! ! ! ! ! S3! UT ! !  ! #! 1! >! A ! B! C! J! K! P! Q! R! S! U! _! d! g! j! l! p! ~! ! ! ! ! ! ! !  ! ! ! ! ! ! !  ! ! ! ! ! ! ! ! ! ! ! ! !  ! ! ! ! ! ! ! !BOUND!CMDLNG! OMTERMINATED!NERR!ERMOSTP! R!GOING! !LENERR!OFORDERn!RANG!  E!RDER! PLTBOUNDSy! UT !  ! ! !  !  !  !  ! !  ! ! ! !  !  !  !  ! !! !! #! $ ! $! &! '! ) ! , ! - ! .! 0 ! 2! :! H! I! J! M! U! V! W! X! Y! b ! c! e! g ! i! k! l! o! q! r! s! w! y! z! !  !  !  ! !    !   !   !   !    ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !   !  !!! ""! ##! $$! %%! &&! ''! ((! ))! **! ++! ,,!  --! ..! //! 00!  11!  22!ERR33! 44! S 55!TINGw 66!RANGEJ77!SIDE88! 899! S::! T;;! y<<! ==! >>! ??! @@! AA! BB! CC! DD! MGEE! PFF!TRTRUGG!WAPHH!PERRII! _OF_RANGEJJ!RANGEKK!VERLL! MM! NN!  OO!  PP!DRAFTQQ!FLOWRR! SS!  TT!  UU! !VV! !WW! %XX! &YY! 9ZZ! V[[! W\\! X ]]! Z ^^! Z__! [``! aaa! bbb! pcc! s dd! zee!  ff!  gg!  hh!  ii!  jj!  kk! ll! mm!  nn!  oo! pp! qq! rr! ss! tt! uu! vv!  ww! xx! yy!  zz!  {{!  ||!  }}!  ~~!  ! !  !  !  !  ED'! R ! S !  !  S! !LAID! ]! n! }! ! ! P !PING ! ! !RANGE! Y! EDm!RIDDEN ! d! ! E! m! n! !  ! ! UN!  ! !WRITE! !  S$! TEN! ! ! !RALI! DSKQUOTA!FLW!MAXARG! UD! WN! EDm! o! q! r! s! R: ! C! k ! o! p! ! ! ! ! !_UICk !ING!PROC! P0SIGNULL{!ACK !  !AGE# ! $ !INGQ! ED! T ! '! 6 ! D! P! U! m! ! ! ! !INGI !TOOLONG! Dq! !DED!RIVER! GE ! ! ! ! ! ! ! ! ! ! %! ( ! -! 2! 3 ! 8 ! ; ! =! D! L! M! M! P! S! T! Z! Z! \ ! ] ! ]! ^! b! c! f! g! h! i! k ! k ! p! q! r! s! s! t! t! u! u! v   ! v  ! v  ! w  ! x  ! ~! ! ! ! ! !  ! !  ! ! ! ! ! ! !  ! ! !    ! !!! ""! ##! $$! %%! &&! ''! ((! ))! **! ++! ,,! --!  ..! //!  00! 11!  22! 33! 44! 55! 66! 77! 88!ABLE#99!CRIT::! D;;! K<<! L==! >>!  ??!  @@!  AA! _GST_TOBIGBB!FAULTCC! DD! EE!ILEI FF! N GG! XHH! YII! zJJ! {KK! LL!RAGMM!INSFNN! NOTFOUNDOO!REDERRPP! SQQ! N RR! SSS! ZTT! `UU! k VV! qWW! |XX! }YY! ZZ! [[! \\! ]]! ^^! __!  ``! aa!  bb!  cc! dd!  ee! ff! gg! hh!WRTERRii!INGjj!ERRkk!LIMEXCll! MISMATCHmm! nn! NOTINREGfoo!WRITEgpp!TRNVALqq!OWNVIOrr!RDERRss! tt!  XMuu!TYPVIOhvv! Kvww! xx! yy!RAGRAPH zz!LLEL{{! ||! M! }}! ~~!ETER!  ! !  ! !  !  ! ! ! ! ! ! ! ! ! ! ! ! "! (! *! +! . ! 3 ! 8! :! D! F! I! K! L! N! O! S! V! W! Z! \! a ! c! e! f! j! j! l! n ! t! w! x! y! z! z! {! ~! ! !  ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !  !  S! ! "! $! )! 6! W ! a! b! t!  !  !  ! ! ! ! ! ! !ENTC! Q! R! ! !HESES,!  IS,! P! !GTMTCH!ITY! ! ! !MDEL! NOTGRANT! SE! V!  ! ! ! !  ! D! !ERR! !FAIL! !OVER! R!ING !  ! %  ! '  ! (  ! |  !   ! ! ! !  !  ! ! ! ! ! ! T(! 8! M! S! s! ! ! !   !COPIED!!!ESCAPE""!IAL<##! >$$! ?%%! H&&! K''! L((! P))! U **! ++! ,,! --! LY ..! W//! 00!  11! 22!CIPANT 33!  44!  55! LYM66!MAPPED77!NER88! 99! ::! ;;!OOBIG<<! S ==! >>>! Y??! @@!_SECTNAA!RIALBB!TIMEOUTCC!UDFKDD!SALREXIEE! S FF! "GG! :HH! mII! JJ! KK! LL!  MM! NN! OO!ALLPP! EDpQQ! RR! SS!LENTT!WORDUU! VV! WW!  XX!  YY!  ZZ! [[! \\! ]]! ^^! __! ``! aa! bb! cc!  dd! "ee! #ff! &gg! +hh! +ii! ?jj! Bkk! Cll! Hmm! Tnn! Uoo! dpp! eqq! err! fss! gtt! huu! ivv! jww! kxx! lyy! mzz! n{{! o||! p}}! q~~! r! s! t! u! ! ! !  ! ! ! ! ! ! ! ! ! ! ! ! ! !  Sd! ! ! T! w! ! !  ! ! ! E!BOARD! ! ! ! !  S! D! T ! CH! ! ! ! #! 6! H! V ! V! ! ! ! !  ! !ING; !ERR! H!  ! ! P! U! W! W! X! Y! Z! ]! q! ! ! !  E!d9"!PATH! ! ! ! ! ! !  !  !  !  !  ! ! ! !  !  ! ! ! ! ! ! RRD! E! XCF!FAILG! ! ! DLH!ILEI! !  RRJ !OREIGNK!!! INL""! M##! N$$! O%%! P&&! Q''! R((! S))! **!DEXT++! G ,,!  --!  ..!  //! 00! "11! '22! 333! 444! <55! =66! >77! ?88! @99! A::! B;;! C<<! D==! E>>! F??! G@@! HAA! IBB! JCC! JDD! KEE! LFF! LGG! LHH! MII! MJJ! NKK! NLL! OMM! ONN! OOO! PPP! QQQ! RRR! SSS! STT! TUU! UVV! VWW! WXX! XYY! YZZ! Z[[! [\\! e]]! ^^! __! ``! aa! bb! cc! dd!  ee! ff! gg! hh! ii! jj! kk! ll! mm! nn! oo!  pp! qq!  rr! ss! tt!OUTUuu! Vvv! Www! Xxx! Yyy! ezz! {{! ||! }}!QUOTAZ~~!UAF[!VIRTUAL\! MS! ! ! ! ! ! (! S! V! Y! d! e! v! ! ! ! ! ! ! RB! C! D! `! !ABORT]! ND ! ! ! ! ! 8! F! q! r! s! z! ! !  ! ! ! !  !  !  ! ! S7! 8! [ ! ! ! !SSIST^! TE! D}!ING ! !! C! D! L! M! m! ! ! ON! ! ! ! ! ! ! ! ! ! ! ! !  !  !  ! ! ! !  !  !  !  ! ! ! " ! # ! #! $! % ! %! %! %! &! & ! &! '! *! +! ,! - ! 0! 1! 1! 2! 2! 2! 5! 6 ! =! @! @! B! B! C! F! G! G! N! N! P! R! U! V! W! X! Y ! Y! ^! ^! ^! `! `! a  ! a  ! b  ! b  ! b  ! c! c! d! e! e! e! f! f! g ! g! g! h! h! i! p! p! r ! s ! s  ! v!!! x ""! y##! z$$! {%%! }&&! ~''! ~((! ))! **! ++! ,,! --! ..! //! 00! 11! 22! 33! 44! 55! 66! 77! 88! 99! ::! ;;! <<! ==! >>! ??!  @@! AA! BB! CC! DD! EE! FF!  GG! HH! II! JJ! KK! LL! MM! NN! OO! PP! QQ! RR!  SS!  TT! UU! VV! WW! XX! YY! ZZ! [[! \\! ]]!  ^^! __! ``! aa! bb! cc! dd! ee! ff! gg! hh! ii! jj! kk! ll! mm! nn! oo! pp! qq! rr! ss! tt!  uu!  vv! ww! xx! yy!  S%zz! V{{! x||! }}! ~~! !  ! OR!  ! !  ! !  ! 1! @! A! A! B! E! G! X! ]! ]! ^! _! b! i! j! m! q! t! t! v! x! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !  !  S[ ! !FAIL_!REQ`!SPECa! TSb!FAILEDG!INCOMPL@! c!PROGd!NFILERRO! OTPERDOSe! F11f!SUPg! h!RABORTi! j!EPLk! Yl! m!HDRDETn!INPo!SETp!NDLNGq!SYNXr! s!OTIFt!QSTu!CANv!SERVERw!NDERRx!SPECLBLy!YNTAXz!TALTFNL!RGMIS{! !BASNOT|! ! IGNALPHA}!ELF!SHR~! ! YS!VAX!NVKITH! ON !  ! ! &! 2! 5! 6! 9! <! @! F! F! G! H! L! O! S! Y! \! a! e! f! f! g! g! h! i! i ! i! k ! l ! l! n ! q ! u ! x! |! }! ~! ! ! ! ! ! ! ! !   !   !   !    !   ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !  ! AL8  ! Y!!! ""! ##! S $$! %%!  &&! ''! ((! 5))! 7**! T++! Y,,! Z--! [..! ] //! a00! i11! n22! o33! {44! 55! 66! 77! 88! 99! ::! ;;! <<! ==! >>! ??! @@! AA! BB! CC! DD! EE! FF! GG!  HH!SDNOTII!LINJJ! NOTSUPPORT/KK!REFILL!SYNERRMM! NN!TYPE2OO!VALERRPP! QQ! _WBM_MERGE[RR! \SS! RBwTT!TOOBIGUU!DERVV! WW! ^XX! jYY! yZZ! z[[! ~\\! ]]! ^^! __! ``!ING~aa! bb!_ERRORcc! Gdd! ANIZATION*ee! jff! gg! hh!IENTED?ii!GINjj! kk! ll! AL)mm! *nn! +oo! -pp! .qq! 1rr! ss! tt!TEDuu! PHAN_BRANCHvv!NLNKGgww! SCTOOLONxx!LDEVyy! zz! {{! ||!PRT}}!THER ~~! /! 7! ! ! ! ! S3! UT ! !  ! #! 1! >! A ! B! C! J! K! P! Q! R! S! U! _! d! g! j! l! p! ~! ! ! ! ! ! ! !  ! ! ! ! ! ! !  ! ! ! ! ! ! ! ! ! ! ! ! !  ! ! ! ! ! ! ! !BOUND!CMDLNG! OMTERMINATED!NERR!ERMOSTP! R!GOING! !LENERR!OFORDERn!RANG!  E!RDER! PLTBOUNDSy! UT !  ! ! !  !  !  !  ! !  ! ! ! !  !  !  !  ! !! !! #! $ ! $! &! '! ) ! , ! - ! .! 0 ! 2! :! H! I! J! M! U! V! W! X! Y! b ! c! e! g ! i! k! l! o! q! r! s! w! y! z! !  !  !  ! !    !   !   !   !    ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !   !  !!! ""! ##! $$! %%! &&! ''! ((! ))! **! ++! ,,!  --! ..! //! 00!  11!  22!ERR33! 44! S 55!TINGw 66!RANGEJ77!SIDE88! 899! S::! T;;! y<<! ==! >>! ??! @@! AA! BB! CC! DD! MGEE! PFF!TRTRUGG!WAPHH!PERRII! _OF_RANGEJJ!RANGEKK!VERLL! MM! NN!  OO!  PP!DRAFTQQ!FLOWRR! SS!  TT!  UU! !VV! !WW! %XX! &YY! 9ZZ! V[[! W\\! X ]]! Z ^^! Z__! [``! aaa! bbb! pcc! s dd! zee!  ff!  gg!  hh!  ii!  jj!  kk! ll! mm!  nn!  oo! pp! qq! rr! ss! tt! uu! vv!  ww! xx! yy!  zz!  {{!  ||!  }}!  ~~!  ! !  !  !  !  ED'! R ! S !  !  S! !LAID! ]! n! }! ! ! P !PING ! ! !RANGE! Y! EDm!RIDDEN ! d! ! E! m! n! !  ! ! UN!  ! !WRITE! !  S$! TEN! ! ! !RALI! DSKQUOTA!FLW!MAXARG! UD! WN! EDm! o! q! r! s! R: ! C! k ! o! p! ! ! ! ! !_UICk !ING!PROC! P0SIGNULL{!ACK !  !AGE# ! $ !INGQ! ED! T ! '! 6 ! D! P! U! m! ! ! ! !INGI !TOOLONG! Dq! !DED!RIVER! GE ! ! ! ! ! ! ! ! ! ! %! ( ! -! 2! 3 ! 8 ! ; ! =! D! L! M! M! P! S! T! Z! Z! \ ! ] ! ]! ^! b! c! f! g! h! i! k ! k ! p! q! r! s! s! t! t! u! u! v   ! v  ! v  ! w  ! x  ! ~! ! ! ! ! !  ! !  ! ! ! ! ! ! !  ! ! !    ! !!! ""! ##! $$! %%! &&! ''! ((! ))! **! ++! ,,! --!  ..! //!  00! 11!  22! 33! 44! 55! 66! 77! 88!ABLE#99!CRIT::! D;;! K<<! L==! >>!  ??!  @@!  AA! _GST_TOBIGBB!FAULTCC! DD! EE!ILEI FF! N GG! XHH! YII! zJJ! {KK! LL!RAGMM!INSFNN! NOTFOUNDOO!REDERRPP! SQQ! N RR! SSS! ZTT! `UU! k VV! qWW! |XX! }YY! ZZ! [[! \\! ]]! ^^! __!  ``! aa!  bb!  cc! dd!  ee! ff! gg! hh!WRTERRii!INGjj!ERRkk!LIMEXCll! MISMATCHmm! nn! NOTINREGfoo!WRITEgpp!TRNVALqq!OWNVIOrr!RDERRss! tt!  XMuu!TYPVIOhvv! Kvww! xx! yy!RAGRAPH zz!LLEL{{! ||! M! }}! ~~!ETER!  ! !  ! !  !  ! ! ! ! ! ! ! ! ! ! ! ! "! (! *! +! . ! 3 ! 8! :! D! F! I! K! L! N! O! S! V! W! Z! \! a ! c! e! f! j! j! l! n ! t! w! x! y! z! z! {! ~! ! !  ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !  !  S! ! "! $! )! 6! W ! a! b! t!  !  !  ! ! ! ! ! ! !ENTC! Q! R! ! !HESES,!  IS,! P! !GTMTCH!ITY! ! ! !MDEL! NOTGRANT! SE! V!  ! ! ! !  ! D! !ERR! !FAIL! !OVER! R!ING !  ! %  ! '  ! (  ! |  !   ! ! ! !  !  ! ! ! ! ! ! T(! 8! M! S! s! ! ! !   !COPIED!!!ESCAPE""!IAL<##! >$$! ?%%! H&&! K''! L((! P))! U **! ++! ,,! --! LY ..! W//! 00!  11! 22!CIPANT 33!  44!  55! LYM66!MAPPED77!NER88! 99! ::! ;;!OOBIG<<! S ==! >>>! Y??! @@!_SECTNAA!RIALBB!TIMEOUTCC!UDFKDD!SALREXIEE! S FF! "GG! :HH! mII! JJ! KK! LL!  MM! NN! OO!ALLPP! EDpQQ! RR! SS!LENTT!WORDUU! VV! WW!  XX!  YY!  ZZ! [[! \\! ]]! ^^! __! ``! aa! bb! cc!  dd! "ee! #ff! &gg! +hh! +ii! ?jj! Bkk! Cll! Hmm! Tnn! Uoo! dpp! eqq! err! fss! gtt! huu! ivv! jww! kxx! lyy! mzz! n{{! o||! p}}! q~~! r! s! t! u! ! ! !  ! ! ! ! ! ! ! ! ! ! ! ! ! !  Sd! ! ! T! w! ! !  ! ! ! E!BOARD! ! ! ! !  S! D! T ! CH! ! ! ! #! 6! H! V ! V! ! ! ! !  ! !ING; !ERR! H!  ! ! P! U! W! W! X! Y! Z! ]! q! ! ! !  E9"}x"9" PATHAMBIG]9" 9" 9"LOST9"NAME9" S9"WINIT9"TLONG 9"UNDEF 9"RES 9"TERN  9" } 9" ~9"USE 9"INPUT 9"ING9" BDIN_USE9" F9" C19" 29" 39" B9" 9" I9" 9" 9" 9" 9" 9" 9"  9" !!9" ""9" ##9" $$9" %%9" &&9" ''9" ((9" ))9" **9" ++9" ,,9" --9" ..9" //9" 009"REL21n119" x229" Bz339" S4449" I$UNDO_001559" OBJECT_669" T779" 889" 999"DFENDL::9" OFM;;9"MSTN<<9" TXO==9"STRP>>9" H:??9"QUALERR@@9"RANGE_INVALIDAA9"ENDINGD BB9" XCC9" }DD9" EE9" FF9" GG9" HH9" II9"  JJ9" R)KK9" mLL9" MM9" NN9"FORMOO9" PP9" /QQ9" BRR9" x SS9" TT9" UU9" VV9" WW9" XX9" YY9"ANCEmZZ9"  [[9" DIALOGUE\\9" ED ]]9" ^^9" __9" ``9" aa9"  bb9" cc9" dd9" ee9"ING ff9" 3gg9" 4hh9" 5ii9" jj9"IODkk9" ll9" mm9" nn9" oo9"MANENT#pp9" qq9" rr9" ss9" tt9" uu9" vv9"  LYww9"  xx9"ITTED$yy9" :zz9" C{{9" U||9" X}}9" Y~~9" `9" `9" e9" f9" p9" r 9" 9" 9" 9" 9" 9" 9" 9"  9" 9"  9" 9" 9"SYM9"SONA9" 99" 9" 9"  9" L 9" NONGRATA9"TAINSF9" S9"XFULL9"FMBSY9" N9" $9" %9" 69" r9"  9"  9" 9" 9" 9"LISTCNT9"MAPY9"NOTMPD9"REFNZRO9" GFGBLBAD9"IPLHI9"LOCBAD9"QUOTAa9" HANOTFND9" SEd9" e9" 9"  9" 9"  9"  9" 9"  9"  9" 9" 9" 9" 9" 9" D*9" 59" [9"ONE9" 59" a9" 9"MIC 9"YDEVGEO9" LG19" SM29"FILSPE9"NOTIMPL9"SET9"ICAL9" $9" %9" '9" (9" 29" :9" Y9" `9" b9" 9" 9" 9" 9" 9" 9" IC9"TURE9" D"9" )9" n9" o9" w9" y9" 9" 9" 9" 9" 9"ECES9"GGYBACK9" N9" PE9" )9" 9" 9" 9" JNOTRAIL9"OPENOUT9"READERR9"VOLNAM9" KGREFCNTQ9" QDR9"LACEc9" o9" 9" D<9" 9"MENTG9" e9"  9" 9"ING9" 9" 9" Y9"EASE9" 9" 9" 9"    9"   9"    9" *  9" -  9" I9" O 9" P9" \9" _9" `9" f9" g9" i9" j9" k9" m 9" q9" s 9" u9" v9" x9" {9" ~  9" !!9"  ""9" ##9" $$9" %%9" &&9" ''9"  ((9" ))9" **9" ++9" ,,9" G--9"SREBOOT..9" Ty//9" UG009" S119" 229" V339" 449" 559" 669"MBXERR779" C889"  999" 0::9"ERROR;;9" INITERROR<<9" T==9" NP>>9" ??9"OINT @@9"  AA9" BB9" CC9" DD9" &EE9" Y FF9" eGG9" fHH9" rII9"  JJ9"  KK9" LL9" MM9" NN9" OO9" PP9" QQ9" RR9"  SS9"  TT9"  UU9"  VV9" ED5WW9" =XX9" RYY9" ZZ9" & [[9" =\\9" O]]9" _^^9" ___9" ``9" aa9" bb9" cc9" dd9" ee9" ff9" gg9" hh9" ii9" jj9" Skk9"INGll9" Smm9"LICIESnn9" Y oo9"  pp9"  qq9" rr9" ss9" tt9" uu9" vv9" ww9" xx9" yy9" zz9" LW{{9" ||9"INGP}}9" Q~~9" OL9" 9" "9" F9" Z9" {9"  9" 9"  9"  9"  9" 9"EXPF9" P9"PEDi9" RT9" 9" 9" 9" 9" 9" 9"  9"  9"  9"  9"  9" 9" 9" %9" '9" )9" *9" *9" : 9" ;9" <9" F 9" I9" J9" O9" P9" Q 9" j9" j9" m9" y 9" ~9" 9" 9"  9" 9" 9"  9" 9" 9"  9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9"DISC 9"ION9"RXERR9" S^9" 9"ETUP 9" S9"CODEGEN9"ROUT9"ERROR9"ITERR9"ION9"  9" 9" # 9" /9" 1 9" 59" ;9" >9" C9" e9" g9" h9" i9" x9"  9"  9" 9"  9" 9"  AL9" 9"  ED9" ING9" 9" G 9" M 9" VE9" 9"SIBLE9" 9"  9" O9" Z 9" ^9"  9" 9" T9" EDz 9" 9"FIX9"INSTALL9"SCRIPT9" 9"_UNDO9"WER 9"  9" 9" 9" Z 9" |9" 9" 9"   9"FAIL  9"   9" PL  9"$STOP   9" TERMINATE 9" P 9"  9" 9" 9" 9" 9" 9" 9" CONNECTERR 9" REATEERR 9" D9" 9" ENABLEERR9"INFOERR9" LISTOVER9" NOTAVAIL9"SETERR9"RACCREM  9" N!!9"BAR""9" ##9" $$9"CERRS%%9"REAT&&9"DALRREMT''9"STAABSU((9" E))9"CEDE**9" Ds ++9" ,,9"ING--9" N..9" U//9" Z009"LUDES119" - 229" ONFIGURE339"DEFREP449"FERENCE 559" IX669" +779"  889" 999" ::9" ;;9"MATURE<<9" ==9" >>9" #??9" /@@9" AA9" EOFBB9"  LYCC9"EOFDD9" EE9"MSGFF9"PAREHGG9"SENCEHH9" II9" T JJ9" KK9" LL9" - MM9" 8NN9" KOO9" VPP9" ]QQ9" jRR9" SS9"  TT9"  UU9" VV9"  WW9" XX9" YY9" ZZ9" EDF[[9" LY=\\9"RVE]]9"  D ^^9" S __9" d``9" aa9" bb9"RET cc9"VDENSdd9"UPACE!ee9"ENT ff9" "gg9" ihh9" jii9" jj9" kk9" Sll9" 6 mm9" g nn9" oo9" pp9" qq9" rr9"RROR"ss9"INIT#tt9"OUSuu9"  vv9" ww9" !xx9" "yy9" 8zz9" [{{9" `||9" a }}9" e~~9" g 9" q9" r9" 9"  9" 9" 9"  9" 9" 9" 9" 9" 9" 9" 9"  LY#9" K9" d9" 9"  9" 9" 9"SET9"_UNDO9"IIHDBAD$9"MARY9" $9" &9" 89" `9" l9" x9" |9" 9"  9" 9" 9" 9"  9" 9" 9" 9" 9" 9" 9" 9" IN%9"NOSTP&9"OUT'9"_DIR|9"NCIPAL9" 9" 9" 9" T(9" )9" e 9" 9"  9" ED\9"ING 9" OR9"ITY 9" 9" 9" *9"  9" 9" 9" 9" 9" 9" 9" 9"SMALL*9"SECMAP+9" V,9"ATE9" 9" 9" )9" +9" LY59"CLASS1V9"  2W9"  3X9"  49"ILEGE9" 9" 9" 9" 9"  9" 9" 9" #9" $9" %9" %9" ,9" B9" C9" D9" N9" O9" P9" Q9" V9" Y9" Z9" ]9" ^9" _9" `9" `9" a9" b9" b9" b9" e9" f9" g9" i9" p9" s9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9"   9"   9"   9"   9"   9" 9" 9" 9" 9" 9" 9" 9" 9"  D-9" .9" :9" @9" C 9" N9" m9" 9" 9"  S 9" =  9" W!!9" X""9" `##9" $$9" %%9" &&9" ''9"MAGE((9" ))9"NSTALL-**9"  R.++9" S.,,9"MCEBe--9"EOF/..9"GBLf//9"MBXg009" N119"OBLEM*229" v339"CDMP449" 559"ONE0669"UMP779" 889"EDURE 999" ::9" ;;9" <<9" ==9" >>9" ??9" @@9" AA9" BB9" CC9" DD9" EE9" FF9" "GG9" ) HH9" 6II9" 7JJ9" hKK9" jLL9" MM9" NN9" OO9"  PP9" QQ9"  RR9" SS9" TT9" UU9" VV9" WW9"  XX9" YY9"  S7ZZ9" 8[[9" [ \\9" ]]9"  ^^9" __9" ``9" aa9" bb9" SS cc9"  dd9"  ee9"  ff9" gg9"  hh9" ii9" jj9" kk9"  ll9" mm9" nn9" "oo9" $pp9" )qq9" ) rr9" )ss9" )tt9" *uu9" +vv9" 4 ww9" 4xx9" 5yy9" 5zz9" 9{{9" ; ||9" <}}9" = ~~9" > 9" ?9" ?9" @9" E9" H9" I 9" J 9" O9" P9" Q9" T9" T 9" V9" W9" Z9" \9" _9" _ 9" `9" b 9" c 9" d 9" d9" j9" n9" n9" o9" u 9" w9" y9" {9" ~9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9"  9" 9"  9" 9"  9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9"  9" 9" 9" 9" 9" 9"  9" 9"  9" 9" 9" 9" 9" 9" 9" 9" 9" 9"BEG19" ED9"  9" "9" u9"  9" 9"  9" 9" 9" 9"  ND29"  S 9"  9" 9" 9" 9" 9"ING9" 9" 9"  9"  9" (9" -9" -9" 09" 09" 39" 59" 69" E 9" H9" J9" K9" L9" X 9" 9" 9" 9" 9" 9" 9" 9"  9" 9" 9" 9"  9" 9" 9" 9"   9"   9"    9" OR0  9" =  9" =9" @ 9" M9" V9" W9" Z9" t9" u9"  9"  9"  9"  9"  9" 9" 9" 9" 9" 9"  SX  9" !!9"FILE3""9"GONE4##9"INDEX6$$9" NOTDUMPED%%9" PARTDUMPED&&9" SUPERSEDED7''9"_ID5((9"DNOTINS8))9"SKIP9**9"UCEQ++9" ,,9" D!--9" A ..9" b//9" c009" h119" i229" R339" 449" ]559" a669" 779" 889" T999" ::9" ;;9" <<9" ==9"  >>9"  ??9" @@9" AA9" BB9" CC9" DD9" EE9" FF9" GG9" HH9" II9" JJ9" KK9" LL9" MM9" NN9" OO9" PP9" QQ9" RR9" "SS9" #TT9" $UU9" %VV9" &WW9" &XX9" ' YY9" *ZZ9" + [[9" 1\\9" 4]]9" 5 ^^9" 6 __9" 7``9" 8 aa9" 8bb9" ;cc9" <dd9" <ee9" > ff9" @ gg9" @ hh9" Bii9" Cjj9" Ikk9" Ill9" Lmm9" Nnn9" O oo9" Ppp9" Qqq9" Trr9" Uss9" Ytt9" Zuu9" [vv9" [ww9" \xx9" \yy9" ]zz9" ]{{9" ^||9" _}}9" _~~9" `9" a9" a9" b9" c9" d9" e9" f9" g9" g9" h9" i9" i9" j9" k9" m9" o9" p9" p9" q9" r9" s9" t9" t9" |9" }9" 9" 9" 9" 9"  9" 9" 9" 9" 9"  9"  9" 9" 9" 9"  9" 9"  9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" S99" A9" B9" k9" q9"ERR:9" ;9"FILEt9"  9"GINIT9"RAM 9" $9" Y9" t9" 9" 9"ESS 9" /9" 79" E 9" F9" U9" W9" \9" ]9" `9" `9" d9" s9" u9" u 9" v9" x9" y9"  9" 9" 9" 9" 9"  9" 9"  9"HIBITED!9" }9" 9" 9" 9" 9"  Si9"LOG9" ;9" 9" 9" 9" 9" 9" 9" UEW9" M 9" 9" PT@9" E9" F9" 9"  9" 9"ING 9"NOTCHG<9"PER/9" LY9" 9 9" q9"TECTED$ 9" 59" =9" >9" ?9" A9" c9" d  9"   9"   9"   9"   9"  9" 9" 9" 9"ING:9" 9" 9"  ON<9" >9" ?9" M9" N9" ]9" ^9" a9" b9" i9" l 9"   9" !!9"  ""9" ##9" RR@$$9"INSTALLA%%9"MISB&&9"OCOL''9"  ((9" ))9" -**9" @++9" B,,9" C--9" D..9" l//9" 009" 119" 229" 339" 449"ERR559"OLONE669" F779"VIOi889"VIDED'999" B::9" `;;9" i<<9" ==9" >>9"XIES??9" @@9" YAA9" +BB9" ,CC9" -DD9" .EE9" /FF9" 0GG9" 1HH9" 2II9" 3JJ9" 4KK9" 5LL9" GMM9" HNN9" IOO9" JPP9" KQQ9" LRR9" mSS9" TT9" UU9" VV9" WW9" XX9" YY9" ZZ9" [[9" \\9" ]]9" ^^9" __9" ``9" aa9" bb9" cc9" dd9" ee9" ff9" gg9" hh9" ii9" jj9" kk9" ll9" mm9" nn9" oo9" pp9" qq9" rr9" ss9" tt9" uu9" vv9" ww9"ACTIVExx9"CONVERTGyy9"MISSINGHzz9"ODIFIED{{9" NOTACTIVE||9" OPENI}}9" SHUTDOWNJ~~9" TARTINGUPK9" TERMINATEDL9" _MANAGEMENT9"TEXTM9" VN9"NOTFNDO9"UNQP9" Q9" SB9"_FIXUPSR9"CALIG9" S9"OPTT9" 9"RESET9"TTIGN9"OPT9"NXRU9" ECBUFOVFV9" W9"UNDX9" Y9"OPCNFLZ9" [9" T 9" 9"  9" 9" 9" 39" 49" 59" 69" 69" :9" ;9" =9" >9" ?9" F9" G9" H9" J9" K9" S9" T9" T9" U9" V9" W9" X9" Y9" Y9" Z9" [9" [9" cEx"$"x"PSECTfx" gx" nx" tx" vx" x" x"  x"  x"  x"  x"  x" x" x" x" x" x" x" x" x" x" x" x" x" x" x" x" x" x" x"  x" !!x" ""x" ##x" 9" !!9" ""9" ##9" $$9" %%9" &&9" ''9" ((9" ))9" **9" ++9" ,,9" --9" ..9" //9" 009"REL21n119" x229" Bz339" S4449" I$UNDO_001559" OBJECT_669" T779" 889" 999"DFENDL::9" OFM;;9"MSTN<<9" TXO==9"STRP>>9" H:??9"QUALERR@@9"RANGE_INVALIDAA9"ENDINGD BB9" XCC9" }DD9" EE9" FF9" GG9" HH9" II9"  JJ9" R)KK9" mLL9" MM9" NN9"FORMOO9" PP9" /QQ9" BRR9" x SS9" TT9" UU9" VV9" WW9" XX9" YY9"ANCEmZZ9"  [[9" DIALOGUE\\9" ED ]]9" ^^9" __9" ``9" aa9"  bb9" cc9" dd9" ee9"ING ff9" 3gg9" 4hh9" 5ii9" jj9"IODkk9" ll9" mm9" nn9" oo9"MANENT#pp9" qq9" rr9" ss9" tt9" uu9" vv9"  LYww9"  xx9"ITTED$yy9" :zz9" C{{9" U||9" X}}9" Y~~9" `9" `9" e9" f9" p9" r 9" 9" 9" 9" 9" 9" 9" 9"  9" 9"  9" 9" 9"SYM9"SONA9" 99" 9" 9"  9" L 9" NONGRATA9"TAINSF9" S9"XFULL9"FMBSY9" N9" $9" %9" 69" r9"  9"  9" 9" 9" 9"LISTCNT9"MAPY9"NOTMPD9"REFNZRO9" GFGBLBAD9"IPLHI9"LOCBAD9"QUOTAa9" HANOTFND9" SEd9" e9" 9"  9" 9"  9"  9" 9"  9"  9" 9" 9" 9" 9" 9" D*9" 59" [9"ONE9" 59" a9" 9"MIC 9"YDEVGEO9" LG19" SM29"FILSPE9"NOTIMPL9"SET9"ICAL9" $9" %9" '9" (9" 29" :9" Y9" `9" b9" 9" 9" 9" 9" 9" 9" IC9"TURE9" D"9" )9" n9" o9" w9" y9" 9" 9" 9" 9" 9"ECES9"GGYBACK9" N9" PE9" )9" 9" 9" 9" JNOTRAIL9"OPENOUT9"READERR9"VOLNAM9" KGREFCNTQ9" QDR9"LACEc9" o9" 9" D<9" 9"MENTG9" e9"  9" 9"ING9" 9" 9" Y9"EASE9" 9" 9" 9"    9"   9"    9" *  9" -  9" I9" O 9" P9" \9" _9" `9" f9" g9" i9" j9" k9" m 9" q9" s 9" u9" v9" x9" {9" ~  9" !!9"  ""9" ##9" $$9" %%9" &&9" ''9"  ((9" ))9" **9" ++9" ,,9" G--9"SREBOOT..9" Ty//9" UG009" S119" 229" V339" 449" 559" 669"MBXERR779" C889"  999" 0::9"ERROR;;9" INITERROR<<9" T==9" NP>>9" ??9"OINT @@9"  AA9" BB9" CC9" DD9" &EE9" Y FF9" eGG9" fHH9" rII9"  JJ9"  KK9" LL9" MM9" NN9" OO9" PP9" QQ9" RR9"  SS9"  TT9"  UU9"  VV9" ED5WW9" =XX9" RYY9" ZZ9" & [[9" =\\9" O]]9" _^^9" ___9" ``9" aa9" bb9" cc9" dd9" ee9" ff9" gg9" hh9" ii9" jj9" Skk9"INGll9" Smm9"LICIESnn9" Y oo9"  pp9"  qq9" rr9" ss9" tt9" uu9" vv9" ww9" xx9" yy9" zz9" LW{{9" ||9"INGP}}9" Q~~9" OL9" 9" "9" F9" Z9" {9"  9" 9"  9"  9"  9" 9"EXPF9" P9"PEDi9" RT9" 9" 9" 9" 9" 9" 9"  9"  9"  9"  9"  9" 9" 9" %9" '9" )9" *9" *9" : 9" ;9" <9" F 9" I9" J9" O9" P9" Q 9" j9" j9" m9" y 9" ~9" 9" 9"  9" 9" 9"  9" 9" 9"  9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9"DISC 9"ION9"RXERR9" S^9" 9"ETUP 9" S9"CODEGEN9"ROUT9"ERROR9"ITERR9"ION9"  9" 9" # 9" /9" 1 9" 59" ;9" >9" C9" e9" g9" h9" i9" x9"  9"  9" 9"  9" 9"  AL9" 9"  ED9" ING9" 9" G 9" M 9" VE9" 9"SIBLE9" 9"  9" O9" Z 9" ^9"  9" 9" T9" EDz 9" 9"FIX9"INSTALL9"SCRIPT9" 9"_UNDO9"WER 9"  9" 9" 9" Z 9" |9" 9" 9"   9"FAIL  9"   9" PL  9"$STOP   9" TERMINATE 9" P 9"  9" 9" 9" 9" 9" 9" 9" CONNECTERR 9" REATEERR 9" D9" 9" ENABLEERR9"INFOERR9" LISTOVER9" NOTAVAIL9"SETERR9"RACCREM  9" N!!9"BAR""9" ##9" $$9"CERRS%%9"REAT&&9"DALRREMT''9"STAABSU((9" E))9"CEDE**9" Ds ++9" ,,9"ING--9" N..9" U//9" Z009"LUDES119" - 229" ONFIGURE339"DEFREP449"FERENCE 559" IX669" +779"  889" 999" ::9" ;;9"MATURE<<9" ==9" >>9" #??9" /@@9" AA9" EOFBB9"  LYCC9"EOFDD9" EE9"MSGFF9"PAREHGG9"SENCEHH9" II9" T JJ9" KK9" LL9" - MM9" 8NN9" KOO9" VPP9" ]QQ9" jRR9" SS9"  TT9"  UU9" VV9"  WW9" XX9" YY9" ZZ9" EDF[[9" LY=\\9"RVE]]9"  D ^^9" S __9" d``9" aa9" bb9"RET cc9"VDENSdd9"UPACE!ee9"ENT ff9" "gg9" ihh9" jii9" jj9" kk9" Sll9" 6 mm9" g nn9" oo9" pp9" qq9" rr9"RROR"ss9"INIT#tt9"OUSuu9"  vv9" ww9" !xx9" "yy9" 8zz9" [{{9" `||9" a }}9" e~~9" g 9" q9" r9" 9"  9" 9" 9"  9" 9" 9" 9" 9" 9" 9" 9"  LY#9" K9" d9" 9"  9" 9" 9"SET9"_UNDO9"IIHDBAD$9"MARY9" $9" &9" 89" `9" l9" x9" |9" 9"  9" 9" 9" 9"  9" 9" 9" 9" 9" 9" 9" 9" IN%9"NOSTP&9"OUT'9"_DIR|9"NCIPAL9" 9" 9" 9" T(9" )9" e 9" 9"  9" ED\9"ING 9" OR9"ITY 9" 9" 9" *9"  9" 9" 9" 9" 9" 9" 9" 9"SMALL*9"SECMAP+9" V,9"ATE9" 9" 9" )9" +9" LY59"CLASS1V9"  2W9"  3X9"  49"ILEGE9" 9" 9" 9" 9"  9" 9" 9" #9" $9" %9" %9" ,9" B9" C9" D9" N9" O9" P9" Q9" V9" Y9" Z9" ]9" ^9" _9" `9" `9" a9" b9" b9" b9" e9" f9" g9" i9" p9" s9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9"   9"   9"   9"   9"   9" 9" 9" 9" 9" 9" 9" 9" 9"  D-9" .9" :9" @9" C 9" N9" m9" 9" 9"  S 9" =  9" W!!9" X""9" `##9" $$9" %%9" &&9" ''9"MAGE((9" ))9"NSTALL-**9"  R.++9" S.,,9"MCEBe--9"EOF/..9"GBLf//9"MBXg009" N119"OBLEM*229" v339"CDMP449" 559"ONE0669"UMP779" 889"EDURE 999" ::9" ;;9" <<9" ==9" >>9" ??9" @@9" AA9" BB9" CC9" DD9" EE9" FF9" "GG9" ) HH9" 6II9" 7JJ9" hKK9" jLL9" MM9" NN9" OO9"  PP9" QQ9"  RR9" SS9" TT9" UU9" VV9" WW9"  XX9" YY9"  S7ZZ9" 8[[9" [ \\9" ]]9"  ^^9" __9" ``9" aa9" bb9" SS cc9"  dd9"  ee9"  ff9" gg9"  hh9" ii9" jj9" kk9"  ll9" mm9" nn9" "oo9" $pp9" )qq9" ) rr9" )ss9" )tt9" *uu9" +vv9" 4 ww9" 4xx9" 5yy9" 5zz9" 9{{9" ; ||9" <}}9" = ~~9" > 9" ?9" ?9" @9" E9" H9" I 9" J 9" O9" P9" Q9" T9" T 9" V9" W9" Z9" \9" _9" _ 9" `9" b 9" c 9" d 9" d9" j9" n9" n9" o9" u 9" w9" y9" {9" ~9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9"  9" 9"  9" 9"  9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9"  9" 9" 9" 9" 9" 9"  9" 9"  9" 9" 9" 9" 9" 9" 9" 9" 9" 9"BEG19" ED9"  9" "9" u9"  9" 9"  9" 9" 9" 9"  ND29"  S 9"  9" 9" 9" 9" 9"ING9" 9" 9"  9"  9" (9" -9" -9" 09" 09" 39" 59" 69" E 9" H9" J9" K9" L9" X 9" 9" 9" 9" 9" 9" 9" 9"  9" 9" 9" 9"  9" 9" 9" 9"   9"   9"    9" OR0  9" =  9" =9" @ 9" M9" V9" W9" Z9" t9" u9"  9"  9"  9"  9"  9" 9" 9" 9" 9" 9"  SX  9" !!9"FILE3""9"GONE4##9"INDEX6$$9" NOTDUMPED%%9" PARTDUMPED&&9" SUPERSEDED7''9"_ID5((9"DNOTINS8))9"SKIP9**9"UCEQ++9" ,,9" D!--9" A ..9" b//9" c009" h119" i229" R339" 449" ]559" a669" 779" 889" T999" ::9" ;;9" <<9" ==9"  >>9"  ??9" @@9" AA9" BB9" CC9" DD9" EE9" FF9" GG9" HH9" II9" JJ9" KK9" LL9" MM9" NN9" OO9" PP9" QQ9" RR9" "SS9" #TT9" $UU9" %VV9" &WW9" &XX9" ' YY9" *ZZ9" + [[9" 1\\9" 4]]9" 5 ^^9" 6 __9" 7``9" 8 aa9" 8bb9" ;cc9" <dd9" <ee9" > ff9" @ gg9" @ hh9" Bii9" Cjj9" Ikk9" Ill9" Lmm9" Nnn9" O oo9" Ppp9" Qqq9" Trr9" Uss9" Ytt9" Zuu9" [vv9" [ww9" \xx9" \yy9" ]zz9" ]{{9" ^||9" _}}9" _~~9" `9" a9" a9" b9" c9" d9" e9" f9" g9" g9" h9" i9" i9" j9" k9" m9" o9" p9" p9" q9" r9" s9" t9" t9" |9" }9" 9" 9" 9" 9"  9" 9" 9" 9" 9"  9"  9" 9" 9" 9"  9" 9"  9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" S99" A9" B9" k9" q9"ERR:9" ;9"FILEt9"  9"GINIT9"RAM 9" $9" Y9" t9" 9" 9"ESS 9" /9" 79" E 9" F9" U9" W9" \9" ]9" `9" `9" d9" s9" u9" u 9" v9" x9" y9"  9" 9" 9" 9" 9"  9" 9"  9"HIBITED!9" }9" 9" 9" 9" 9"  Si9"LOG9" ;9" 9" 9" 9" 9" 9" 9" UEW9" M 9" 9" PT@9" E9" F9" 9"  9" 9"ING 9"NOTCHG<9"PER/9" LY9" 9 9" q9"TECTED$ 9" 59" =9" >9" ?9" A9" c9" d  9"   9"   9"   9"   9"  9" 9" 9" 9"ING:9" 9" 9"  ON<9" >9" ?9" M9" N9" ]9" ^9" a9" b9" i9" l 9"   9" !!9"  ""9" ##9" RR@$$9"INSTALLA%%9"MISB&&9"OCOL''9"  ((9" ))9" -**9" @++9" B,,9" C--9" D..9" l//9" 009" 119" 229" 339" 449"ERR559"OLONE669" F779"VIOi889"VIDED'999" B::9" `;;9" i<<9" ==9" >>9"XIES??9" @@9" YAA9" +BB9" ,CC9" -DD9" .EE9" /FF9" 0GG9" 1HH9" 2II9" 3JJ9" 4KK9" 5LL9" GMM9" HNN9" IOO9" JPP9" KQQ9" LRR9" mSS9" TT9" UU9" VV9" WW9" XX9" YY9" ZZ9" [[9" \\9" ]]9" ^^9" __9" ``9" aa9" bb9" cc9" dd9" ee9" ff9" gg9" hh9" ii9" jj9" kk9" ll9" mm9" nn9" oo9" pp9" qq9" rr9" ss9" tt9" uu9" vv9" ww9"ACTIVExx9"CONVERTGyy9"MISSINGHzz9"ODIFIED{{9" NOTACTIVE||9" OPENI}}9" SHUTDOWNJ~~9" TARTINGUPK9" TERMINATEDL9" _MANAGEMENT9"TEXTM9" VN9"NOTFNDO9"UNQP9" Q9" SB9"_FIXUPSR9"CALIG9" S9"OPTT9" 9"RESET9"TTIGN9"OPT9"NXRU9" ECBUFOVFV9" W9"UNDX9" Y9"OPCNFLZ9" [9" T 9" 9"  9" 9" 9" 39" 49" 59" 69" 69" :9" ;9" =9" >9" ?9" F9" G9" H9" J9" K9" S9" T9" T9" U9" V9" W9" X9" Y9" Y9" Z9" [9" [9" cE"}""PSECTS0 " o" " " " " "  " L  "  " 0  " : " ;" H" }" "  "  " " " "  "  " " " " " " " "  "  !!" """  ##" $$" %%"  &&"  ''" (("  ))"  **"  ++"  ,," R--"  .." 0//"TFULL\00"USPECT]11"WAPMp22" TEM33" ^44" z55" 66" 77" 88"LENVIOL^99" S)::"FDUPMODY;;"PRMZ<<"INVMOD[=="PRM\>>"MISMAT1]??"  2^@@"  3_AA"  4`BB"  5aCC"  6bDD"  7cEE"PRDdFF"  MeGG"ODSKPfHH"NOHDRgII"PRD1SThJJ"UNDMODiKK"PRMjLL"RCNT_MM"UDRIVERNN"RGEaOO" PP" DQQ" RR"  SS"VER`TT"WSSCNaUU"SHDOWNbVV"STAOVEbWW" T!XX" cYY"ERRcZZ"MSG[["_MODULE!\\" WD2NOTSETd]]" CANTCHANGE ^^"EXPIRe__"  ED ``"INDICfaa"  Tbb"HISgcc" TORYdd"VALIDee"CHARff"LESSMINhgg"OCKEDihh" jii"NCHkjj" OLlkk"TCHGll"DIFmmm"VALnnn" ooo" ERppp" qqq"SYNTAXrrr" sss" ttt"TOOEASYuu"LONGvv"SHORTww"WEAKuxx" Fvyy"QEMPTYwzz"FACTIVEx{{"NOTACTy||" IO}}" z~~" {" |" }" " "BFOVFz" CALLFAIL{"ERR|"FAILED"OPFAIL}" _FAILURE" MANABORT~"CREPRC"DEL" NOTSTARTED" GREXISTS" ST" UADMEMREF"WORD"LIFIER " " "  "  "  "  " "  " " " " " " " " !" #" 3" 7" 9" :" A " C" G" I" I" K" R" S" S" S" U" \" ^" `" `" b " c" d" d" e" i" j" k " m" m " n" n" q" s" w" |" ~" " "  " " " " " " "  " " " " " " " " " " " " " " " " " " " " " " "  " " " " " " " " " " " " " " " " " " " " " " " " " "  " " " " "  "  "  S   "    "    "    " .  " b" c " c" t" " "  " " " "GNSHR" NV" "MISSINGj"OBS"NTITY]" Ex" y"   " !!"AUTOOFF""" DISABLED##"COR$$"FORMAT%%"NOTMOD&&"START''"  OP(("RESET))"STIONS**" UE++"  ,,"  --"  .." //" 00" 11" 22" 33" 44" 55" 66" "77" "88" #99" +::" 6 ;;" ? <<" G==" Q >>" V??" X@@" YAA" [BB" ^CC" d DD" e EE" gFF" j GG" jHH" uII" uJJ" vKK" w LL" wMM" wNN" xOO" yPP" ~QQ"  RR" SS"  TT"  UU" VV" WW" XX" YY" ZZ" [[" \\" ]]" ^^" __" ``" aa" bb" cc" dd" ee" ff" gg" hh" ii" jj" kk" ll" mm" nn" oo" pp" qq" rr" ss"  tt" uu" vv" ww" xx" yy"  zz" {{" ||"  }}"  ~~" " " " " " " " " D " "MPTY" S"WASEMP"_CLOSED"IESCENTG " TJ" d" "TING" " O"RUM" G " V" TA" " " & " ' " ) " 3 " 4 " 8 " 9 " : " :" =" I " J" N " Q " X " Z" [" _ " f" f" j " n " r" x " x " x" " " " " " " "  "  " "  " "  " " " " "FAIL"ILE" NF"RERR" S" y"TION," E(" ," y" D-" G" j" l" y" " " " "R12r" AB" 6" h" " " C"DIX"RMOD"ISED* " + " - " 5" 8" :" [" M " "NDOM" /" GE " " " #" # " % " 8" >" A " C" J" R" S" f" g" p" q" s" " " " " "  " " " " "  "   "   "   "   "    " " " " " " " " " " " " " " " " " " "    " !!" """ ##" $$" %%"ERR&&" S''" ((" Ko))" T**" E8++" ,,"INGz--" .."NOTINIT//" BF00"CBERR11" P|22" T33" 44"NOPRIV55"UNRSZR66" DBADDERR77"  U88"  V99"MSG::"  U;;"CREERR<<"DONEMSG=="MDFYERR>>"  U??"MSG@@"NOMODSAA"REMERRBB"MSGCC"  UDD"DELDATAEE" SETDATFILFF"NONRESGG" _IMAGE_ERRHH" SYSIMG_ERRII" EACHABLEgJJ" hKK" mLL" MM" NN" ED OO" +PP" ? QQ" H RR" SS" TT" UU" VV" WW" XX" SG YY"QUIREZZ" D[[" \\"  ]]" ^^"  __" ``" aa" bb"  cc" dd" ee" *ff" +gg" ,hh" -ii" Bjj" Ckk" Ill" Nmm" Qnn" Uoo" Vpp" Xqq" g rr" t ss" u tt" uu" vv" ww" xx" yy" zz"  {{" ||"  }}" ~~"  " " " " " " " " " " " "  " " "  " " "  " " " " " " " " " "ABLE"ORTED" CE"TTR"BAD"LOCK"MAP"OOT"CHECK" REC"DIR" "ERR" " " " " " " " "REC" S"FAIL"ILE"HEADER" "OME"IBMAP"MAP" NG"  "  " " " " " " :" >" D" N" O" P" T" g " q " s" t" u"  " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " "  "JNLACE" LINEHELP"ONLYQ" "QUOTA  "SBMAP  " CB  "   " YM  "VERR" Y7" > " w" " " "READ"WRITE"_CHAR" "KEY"LINE" "JBCMBX" L" " "   "LYQUIT!!"RECOVER"""SON<##" E $$" R%%" [ &&" \ ''" ^ ((" _ ))" a **" b ++" c ,," d --" e .." e //" f 00" g 11" 22" 33" 44" 55" 66" 77"SEMBLEl88"BLDREQD99" ::"WARN;;"OOTA <<" S==" Y>>" ??" EDD@@" AA"INGBB"UILDCC"  DD" EE" CFF" GG" HH" II" JJ" T KK"CALLLL"EIVEMM" }NN" ~OO" PP" QQ"  RR" SS" D TT" UU" VV"  WW"  XX" YY" CZZ" E[[" M\\" Q]]" U ^^" X__" Y``" Zaa" [bb" i cc" m dd" nee" {ff" ~gg"  hh"  ii" jj"  kk" ll" mm" nn" oo" pp" qq" rr" ss" tt" uu" vv" ww" xx" yy" zz"  {{"ING0||"PTION}}"GTRBL~~"JNLOPEN"LAIMED " NG" " "OGNIZEk "  D" ;" "  S"MMENDEDV" w" NFIGURATION$" NECTIONS2 "STRUCT" RD" " " "  "  "  "  "  "  "  "  "  " " " " " "  " " " "  " " " " " " " " " " " "  " "  "  " !" #" $" ( " ) " ," ," . " /" 0" 1 " 2" 3" 5 " 5" 6" 7" 8" ? " D" H" H" J" J" M" N" Y" \ " _ " a " b " c " f " f" i" m" n" q" r " s " s" t" u" y" y" z" z" z" {" |" }" }" " " " " " "  " " " " " " " " " " " " "  " " " " " " " "  " " " " " "   "    "   "   "    " " " " " " " " " "  " " " " " " " " "   " !!"  """ ##" $$" %%" &&" ''" ((" ))" **" ++" ,," --" .." //" 00" 11" 22" 33" 44" 55" 66" 77" 88" 99" ::"  ;;" <<" ==" >>" ??" @@" AA" BB" CC" DD" EE" FF" GG" HH"ANSII" EDJJ"ING"KK" }LL" MM"  NN" OO" SPP" QQ" RR" SS" TT" - UU" GVV" HWW" HXX" JYY" JZZ" L[[" L\\" T]]" ]^^" q__" y``" aa"  bb" cc"  dd" ee"  ff" gg" hh" ii" jj" kk" ll" mm" nn" oo" pp" qq" WLrr"_FORMATqss"  tt"VERG uu" cvv" ww"ABLENxx" Qyy" Tzz" ORT{{"BEG||" UFBEG}}" END~~" FILE1" 2" 3" 4" ED$" (" 0" c" " " "  ND"FAIL"ING " (" )" *" +" -" ." 0" 1" 2" 3" 5" 6" " "QUIT" Y" "  " " " /" 0" 1" S" Y" n" o" p" w" ~ " " " " " " "  "  " " "  " " " " "  " "  " " " " "  "  " " " " " " " " " " " " "  " _UNIT_SERVII"PRN"REATE"ING"  ON1"TOBIG"OBIG"SML"RUNC" YP" "URLEARN"SION" "DCACHE" "EFINED" " "ING"SYM"FLGERR" IRECTIONo" "  " " "  S"UCED" _" c" " "ING"NDANCYc"  T" EL " NT" ER" '" b"RANCY"  T " F"  " " "CNT"NEG"DCLHLP" ER\"ENCE" " " " " "   "    "    " !   " +  " ;" >" L" Q" X" Y" `" d" e" h " l" s" v " x" " " " "   " !!"  """ ##" $$" %%" &&" ''" ((" ))" **" ++" ,," --" .." //" 00" 11"  D 22" 33" &44" <55" > 66" C77" I88" N99" f::" j;;" k<<" o==" p>>" t??" |@@" }AA" BB" CC" DD" EE" FF" GG" HH"  II"  JJ"  S KK" 4LL" fMM" nNN" sOO" vPP" QQ" RR" SS" INGTT" SUU"LECT VV" .WW" XX"RESH YY"_NEEDED ZZ"UNAPRCk[["SED \\" ]]" XX# ^^"GDECCON __"ION9``" Haa" Kbb" Lcc" Mdd" fee" kff" mgg" hh" ii" jj" kk" SWll" mm"SFULLknn"TER oo"  pp" qq"  rr" ss"  tt" uu"  vv" <ww" Dxx" `yy" lzz" r{{"  ||"  }}"  ~~" " " " " " " " " " " " " " " " " " " " " " "  "  " " "  ED" v"  " "  S" l" }"  "  "  "  " " " "RATION" Y" " " " " " " " " " " " NOTAVAILl"VLD"OPSYNX" E"}5#" REGOWNVIOm"ULAR3" 4" "TORm" |"WIDDUP"INITERR " IALIZATION "  "  E " ING " " " NG"_WAIT"JECT" ED"  " B"  "  "  " " " " " " " S"  " L4!!" """ATED##" K$$" x%%" |&&"IVE ''" ((" ))" **" ++" ,,," 1--" ;.." D//" O00" P11" S22" f33" q 44" y55" y 66" 77" 88"  99" ::" ;;" <<" ==" >>" ??" @@"  AA" BB"CONCATCC"EASEDD" EE" FF" GG" HH" II" JJ" DrKK" sLL" zMM" {NN"INKOO" iPP" jQQ" kRR" lSS" TT"MOVEDUU" OCATABLE4VV" 6WW" SXX" UYY" ZZ" [[" \\"ION ]]" ^^" __" ``" aa" bb" cc" dd" ee" ff" gg" hh" ii" jj" kk" ) ll" nmm" onn" qoo" rpp" sqq" trr" uss" vtt" wuu" xvv" yww" zxx" {yy" |zz" }{{" ~||" }}" ~~" " " " " " " " "  S" v"KED"DIFTYPEw"FIXDZ"LKG"OUT"SHRIMGs"MARCEST"FAIL"NAVL"STS"DEF"ISABLED "ENABLED!" RR"" #"INVKITl"MSG$"NOTENAB%"OINSF&" '" TE" " " " " "  " &" '" (" )" *" +" +" -" 1" 5" ;" <" <" A" D" G" M" O" T" U" h" l" " " " " " "  " " " " " " " " " " " " " " " " "  " " " " " " " " " " " " " " " " " "USERa"_PROC+"UNT," H " ED,"VOL,"VAL " E" " -" 8" I " X" Y" i " l" m" w"  " " " " " " D " " " " " $" ." /" 0" 2" :" @ " T" [" _  " g  " h  " t  "   " " " " " " " " " " "  "ING"" -" 5" " "QHI"RSRC1"UNOSm  "SYS2!!"NAME3""" ##" $$"  %%" &&" D''" ((" 4))" 5**" 6++" 7,," --" .." //"  00"ING311"DEF522"MSG633"SYS744"OPENERR855"ING866"PAIR 77" \88" _99" ::" ;;" EDV<<" Z==" [>>"ING??"QUAL\@@"CNTTOO9AA"EAT9BB" CC" DD" EDEE"INGFF"LACEDGG" . HH" / II" :JJ" ;KK" nLL" MM"ERR<NN"MENT<OO" PP" RR=QQ"ING9RR" :SS" =TT"  UU"YFAIL>VV"WARNING?WW" Y@XX" AYY" QZZ" ][[" k\\" l]]" m^^" q__" t``" {aa" bb" cc" dd" ee" ff"ERRAgg"ORThh" ii" *jj" Ikk" ]ll" ~mm"  nn" oo" pp" qq" rr" ss" ED tt"  uu" Tvv" kww" xx" yy"ING zz"SITION {{" RESENTATIVE ||" -}}" O ~~" s " s " w"  "  "  "  " "  " " QARGSMISSINGB" DITEMMISSC"FILMISD"ITMMIS"KEYE"PRMABSF" RECEIVED"UEST "  "  "  " "  " " " !" "" $" (" )" 6" :" :" A" E" G" J" M" ]" j" k" l" o" u" v" w" x" z " }" ~" ~" " " " " " " " "  " " " " " " " " " " "  " " " "  " " " "  " " " " " " " " " " " " " " " " " " ED"  " "  "  " " " " $" ) " *" *" ," ." 0" 1" 1" 2" 2" 4" 6 " 7" 9" ; " ;" =" = " ? " B" B" D " D" D" N" P" P" S" T " U " Z" [" ^" ^  " d  " h   " i  " n  " o" q" y " {" |" }" ~" " " " " " " " " " " "   " !!" """ ##" $$"  %%" &&"  ''" ((" ))" **" ++" ,," --" .." //" 00" 11" 22" 33" 44" 55" 66" 77"  88" 99"ING::" ;;" @<<" _==" >>" ORy??" @@" AA" BB" S5CC" wDD"UED EE" FF"IREGG"  HH" !II" qJJ" vKK" yLL"  MM" NN" D OO"  PP"  QQ"  RR" SS" TT" UU" VV" !WW" "XX" #YY" 'ZZ" '[[" *\\" 2 ]]" 3^^" 3__" 4``" 6aa" 7bb" 9cc" : dd" >ee" ?ff" @gg" Bhh" Bii" Bjj" Ckk" Fll" Gmm" Hnn" Joo" Rpp" Sqq" `rr" `ss" btt" buu" dvv" eww" jxx" zyy" zz" {{" ||" }}" ~~" " " " " "  "  "  " " " " "  "  " "  " " " "  " " " " " " " " "MENTO" " " "  S " !" " " " " S" " " " "  "  " " " !" #" $" $" %" %" A " C" D" D" I" J" K" K" R" V" W" X" Y" [" \" _" `" `" a" b" e" f" g" i" p" s" " " " " " " " " " " " " " " " " " " " " " " " " "  " " " " " " DECWI" MOTIFJ" TERMK" ULTRIXL" VMSM" _WBM_FAIL^" MERGE_" `" RN"EAD2"SCRASHO"ITICALP"DISMISSQ"EQUENCEV" "RVATION" " E" [" " D" " " " :" ;" ;" D" X  "   "   "   "   " " " "  "  " " "  "  " " TR" T" " " " " " "FAILS  "IDENT7!!" C """ S##" m $$" %%" &&" ''"GNALT((" n))" _64n**"NFOU++"NOTDISKV,,"OKAYW--"LUTION<.." =//" VE 00" !11" (22" X33" Y44" y55" z66" 77" 88" 99" Ds::" ;;" <<"PCODEX=="URCE>>" ??" @@"  AA" BB"  CC" !DD" % EE" %FF" 0GG" QHH" UII" UJJ" VKK" \LL" eMM" fNN" gOO" hPP" QQ" RR" SS" TT" UU" VV" WW" XX" YY" ZZ" [[" \\" ]]"  ^^" __" ``" NOTAVAIL0aa"  Sbb" .cc" 1dd" Oee" Pff" Wgg" chh" fii" jj"  kk" ll" mm" nn" oo" pp" qq"PECIFYzrr" ss" tt"ONDuu" Kvv" ww" xx" SEyy" 4zz" @{{" T||" Y}}" |~~" " " " "  " " " " " "TART/ " 8 " L" R" V" W" Z" [" \" d " "  " " " " " "ABLE"COM[" ED[" "ING" O" "OOBIG\" RE" G" ]" ^" g" o" " " Df "  " " "FAIL^" _SAVESET " "ING]" |"RICT_" `"  EDd" " " " " ION"  S "  S_"UCTURE"ULT"  "ANTa" " " " " ED"ING" "OVFa" SQ" " MEb" c" Dc" d" e"FAILe"WARNf"INGb"WARNINGg" T " j" l"ADDRMODh"POPi"REFj" INn"CALLERk"ENSION"FOLLOCj"INJSBl" RANSLATEm"IES" "VAL_" E^"  D" Y" ("PWD"URN"  " e" h" i" j" k" y" " " " " " " " " " ED" " /" 4" 5" 7" =" J " M" T" X" n" x" |" }"  "   "    "   "   "    "  " " "  "INGs"  "  " V " " : " "ECTOR "RSECASEo" Do"ISED"ION!" '" 2 " 3  " 9!!" """ ##" $$"OKEp%%" &&" Dq''"ERRp(("MSGq))"WINDr**"  ++"INGG ,,"OUNDr--"RITINGR.." Xs//" t00"PORT111" FAu22" v33" 44"  55" 66" 77"ERRv88"PASTEOFw99" CN::"822";;" :<<"LOCx==" M[>>" y??" HBz@@"IGHT@AA" EBB" kCC" lDD" EE" FF" SRGG" jHH" kII" vJJ" xKK" yLL" zMM" {NN" {OO" PP" QQ" RR" SS" TT" UU" VV" WW" XX" YY" ZZ" [[" \\" ]]" ^^" __" ``" aa" bb"FULL{cc"LIMdd"  STee" ff" NGgg" JREhh" LF|ii" K}jj"SSRVERR~kk"TMSGll"MALRDCLmm" DISABLEDnn"RDUPINVoo"FILCREpp"REPAGqq"NOMATCHrr"VERMISss" S tt" uu" )vv" Eww" Fxx" Gyy" Hzz" J{{" R||" S}}" e ~~" h " h" v" " " " " " " " " " " " " " "  "  "  "  "  "  "  "  "  " " "BUG"ERROR"FILINI"MIS"HUT"TART"UCCESS" TDMTSUCC"SMFAIL"MNTFAIL"SUCC"PATH" UNSUCCESS" V" NAME_ABSENT"INV"LONG"ODD" F" " L" X "OLL"BACK " ED"  "  "FORWREV"ING" M9" >" " OM9" < " " " " T " " }" " " " S" P"RAND" "UND" ED" UP"TINE"  "  " " " "  " " " "  "  " " "  " " " " & " 3 " :" >" E" E" M" P" Q" X" X" Y" Y" Z " `" e" h" h" i" i" i" j" k" k" l" n" r" r" }"  "  "  " " " " " " " " " " "   "   "   "   "    " " " " "  " " " " " " " " " " " " " "   " !!" """ ##" $$"  %%" &&" ''" ((" ))" **" ++" ,," --" .."  //" S00" 11" 22" 33" 44" 55" 66"  77"_NAMEh88" i99" k::" G;;"REQ<<" W==" PB>>" L??" TCNTNABS@@" AA"QCBBB"STABORTCC"CANDD"MPLTEEE"DONFF" EGG"PENDHH"STSTII" RFJJ" VKK" LL" SAMM" B NN"  OO" jPP" QQ" RR"REFNEGSS"ZROTT"DMINUSEUU"NOTFOUVV"_ACTIVEWW" EXX" STK_ALLOCYY" KZZ" L[["OVF\\"OFFSET]]"PID^^"_BUF_REV_UNSUPP__"NO_ROOM``"RVDNAMEDaa" Sbb" Tcc"RTDISdd" Vee"_ERRff" Zgg" hh"_LSS_ACii"T11_BADDIRECTjj" FILEkk" IGBADFILEll"DIRSIZEmm"ERRLOCKnn"XTRAoo"NOENDpp" OVERFLOWqq"STBLOCKrr" TOOMANYBLKss" SEGtt"UNKENTuu" Bvv" LAww" xx" yy"NCALLOCkzz"ERROR{{"OUTEOF||"PROTECT}}" S~~" UCONFLICT" F" " H" ID" MISMATCH" L"ESET" N" -" ." ; " Z" j" k"  " " " " " "  " " "DOWN "NING" " >" B" m" " " " " " " " " " " "OFF "  "  "TIMSTK" RME"_ACTIVE" VN" E5#$t#5#RVN5# $5# &5# 35# 45# 65# 95# : 5# ? 5# F  5# M 5# N 5# T5# U5# d5# w5# x5# z5# 5# 5# 5# 5# 5# 5# 5# 5# 5# 5# 5# 5#  5# !!5# ""5#  ##5#  4!!" """ATED##" K$$" x%%" |&&"IVE ''" ((" ))" **" ++" ,,," 1--" ;.." D//" O00" P11" S22" f33" q 44" y55" y 66" 77" 88"  99" ::" ;;" <<" ==" >>" ??" @@"  AA" BB"CONCATCC"EASEDD" EE" FF" GG" HH" II" JJ" DrKK" sLL" zMM" {NN"INKOO" iPP" jQQ" kRR" lSS" TT"MOVEDUU" OCATABLE4VV" 6WW" SXX" UYY" ZZ" [[" \\"ION ]]" ^^" __" ``" aa" bb" cc" dd" ee" ff" gg" hh" ii" jj" kk" ) ll" nmm" onn" qoo" rpp" sqq" trr" uss" vtt" wuu" xvv" yww" zxx" {yy" |zz" }{{" ~||" }}" ~~" " " " " " " " "  S" v"KED"DIFTYPEw"FIXDZ"LKG"OUT"SHRIMGs"MARCEST"FAIL"NAVL"STS"DEF"ISABLED "ENABLED!" RR"" #"INVKITl"MSG$"NOTENAB%"OINSF&" '" TE" " " " " "  " &" '" (" )" *" +" +" -" 1" 5" ;" <" <" A" D" G" M" O" T" U" h" l" " " " " " "  " " " " " " " " " " " " " " " " "  " " " " " " " " " " " " " " " " " "USERa"_PROC+"UNT," H " ED,"VOL,"VAL " E" " -" 8" I " X" Y" i " l" m" w"  " " " " " " D " " " " " $" ." /" 0" 2" :" @ " T" [" _  " g  " h  " t  "   " " " " " " " " " " "  "ING"" -" 5" " "QHI"RSRC1"UNOSm  "SYS2!!"NAME3""" ##" $$"  %%" &&" D''" ((" 4))" 5**" 6++" 7,," --" .." //"  00"ING311"DEF522"MSG633"SYS744"OPENERR855"ING866"PAIR 77" \88" _99" ::" ;;" EDV<<" Z==" [>>"ING??"QUAL\@@"CNTTOO9AA"EAT9BB" CC" DD" EDEE"INGFF"LACEDGG" . HH" / II" :JJ" ;KK" nLL" MM"ERR<NN"MENT<OO" PP" RR=QQ"ING9RR" :SS" =TT"  UU"YFAIL>VV"WARNING?WW" Y@XX" AYY" QZZ" ][[" k\\" l]]" m^^" q__" t``" {aa" bb" cc" dd" ee" ff"ERRAgg"ORThh" ii" *jj" Ikk" ]ll" ~mm"  nn" oo" pp" qq" rr" ss" ED tt"  uu" Tvv" kww" xx" yy"ING zz"SITION {{" RESENTATIVE ||" -}}" O ~~" s " s " w"  "  "  "  " "  " " QARGSMISSINGB" DITEMMISSC"FILMISD"ITMMIS"KEYE"PRMABSF" RECEIVED"UEST "  "  "  " "  " " " !" "" $" (" )" 6" :" :" A" E" G" J" M" ]" j" k" l" o" u" v" w" x" z " }" ~" ~" " " " " " " " "  " " " " " " " " " " "  " " " "  " " " "  " " " " " " " " " " " " " " " " " " ED"  " "  "  " " " " $" ) " *" *" ," ." 0" 1" 1" 2" 2" 4" 6 " 7" 9" ; " ;" =" = " ? " B" B" D " D" D" N" P" P" S" T " U " Z" [" ^" ^  " d  " h   " i  " n  " o" q" y " {" |" }" ~" " " " " " " " " " " "   " !!" """ ##" $$"  %%" &&"  ''" ((" ))" **" ++" ,," --" .." //" 00" 11" 22" 33" 44" 55" 66" 77"  88" 99"ING::" ;;" @<<" _==" >>" ORy??" @@" AA" BB" S5CC" wDD"UED EE" FF"IREGG"  HH" !II" qJJ" vKK" yLL"  MM" NN" D OO"  PP"  QQ"  RR" SS" TT" UU" VV" !WW" "XX" #YY" 'ZZ" '[[" *\\" 2 ]]" 3^^" 3__" 4``" 6aa" 7bb" 9cc" : dd" >ee" ?ff" @gg" Bhh" Bii" Bjj" Ckk" Fll" Gmm" Hnn" Joo" Rpp" Sqq" `rr" `ss" btt" buu" dvv" eww" jxx" zyy" zz" {{" ||" }}" ~~" " " " " "  "  "  " " " " "  "  " "  " " " "  " " " " " " " " "MENTO" " " "  S " !" " " " " S" " " " "  "  " " " !" #" $" $" %" %" A " C" D" D" I" J" K" K" R" V" W" X" Y" [" \" _" `" `" a" b" e" f" g" i" p" s" " " " " " " " " " " " " " " " " " " " " " " " " "  " " " " " " DECWI" MOTIFJ" TERMK" ULTRIXL" VMSM" _WBM_FAIL^" MERGE_" `" RN"EAD2"SCRASHO"ITICALP"DISMISSQ"EQUENCEV" "RVATION" " E" [" " D" " " " :" ;" ;" D" X  "   "   "   "   " " " "  "  " " "  "  " " TR" T" " " " " " "FAILS  "IDENT7!!" C """ S##" m $$" %%" &&" ''"GNALT((" n))" _64n**"NFOU++"NOTDISKV,,"OKAYW--"LUTION<.." =//" VE 00" !11" (22" X33" Y44" y55" z66" 77" 88" 99" Ds::" ;;" <<"PCODEX=="URCE>>" ??" @@"  AA" BB"  CC" !DD" % EE" %FF" 0GG" QHH" UII" UJJ" VKK" \LL" eMM" fNN" gOO" hPP" QQ" RR" SS" TT" UU" VV" WW" XX" YY" ZZ" [[" \\" ]]"  ^^" __" ``" NOTAVAIL0aa"  Sbb" .cc" 1dd" Oee" Pff" Wgg" chh" fii" jj"  kk" ll" mm" nn" oo" pp" qq"PECIFYzrr" ss" tt"ONDuu" Kvv" ww" xx" SEyy" 4zz" @{{" T||" Y}}" |~~" " " " "  " " " " " "TART/ " 8 " L" R" V" W" Z" [" \" d " "  " " " " " "ABLE"COM[" ED[" "ING" O" "OOBIG\" RE" G" ]" ^" g" o" " " Df "  " " "FAIL^" _SAVESET " "ING]" |"RICT_" `"  EDd" " " " " ION"  S "  S_"UCTURE"ULT"  "ANTa" " " " " ED"ING" "OVFa" SQ" " MEb" c" Dc" d" e"FAILe"WARNf"INGb"WARNINGg" T " j" l"ADDRMODh"POPi"REFj" INn"CALLERk"ENSION"FOLLOCj"INJSBl" RANSLATEm"IES" "VAL_" E^"  D" Y" ("PWD"URN"  " e" h" i" j" k" y" " " " " " " " " " ED" " /" 4" 5" 7" =" J " M" T" X" n" x" |" }"  "   "    "   "   "    "  " " "  "INGs"  "  " V " " : " "ECTOR "RSECASEo" Do"ISED"ION!" '" 2 " 3  " 9!!" """ ##" $$"OKEp%%" &&" Dq''"ERRp(("MSGq))"WINDr**"  ++"INGG ,,"OUNDr--"RITINGR.." Xs//" t00"PORT111" FAu22" v33" 44"  55" 66" 77"ERRv88"PASTEOFw99" CN::"822";;" :<<"LOCx==" M[>>" y??" HBz@@"IGHT@AA" EBB" kCC" lDD" EE" FF" SRGG" jHH" kII" vJJ" xKK" yLL" zMM" {NN" {OO" PP" QQ" RR" SS" TT" UU" VV" WW" XX" YY" ZZ" [[" \\" ]]" ^^" __" ``" aa" bb"FULL{cc"LIMdd"  STee" ff" NGgg" JREhh" LF|ii" K}jj"SSRVERR~kk"TMSGll"MALRDCLmm" DISABLEDnn"RDUPINVoo"FILCREpp"REPAGqq"NOMATCHrr"VERMISss" S tt" uu" )vv" Eww" Fxx" Gyy" Hzz" J{{" R||" S}}" e ~~" h " h" v" " " " " " " " " " " " " " "  "  "  "  "  "  "  "  "  " " "BUG"ERROR"FILINI"MIS"HUT"TART"UCCESS" TDMTSUCC"SMFAIL"MNTFAIL"SUCC"PATH" UNSUCCESS" V" NAME_ABSENT"INV"LONG"ODD" F" " L" X "OLL"BACK " ED"  "  "FORWREV"ING" M9" >" " OM9" < " " " " T " " }" " " " S" P"RAND" "UND" ED" UP"TINE"  "  " " " "  " " " "  "  " " "  " " " " & " 3 " :" >" E" E" M" P" Q" X" X" Y" Y" Z " `" e" h" h" i" i" i" j" k" k" l" n" r" r" }"  "  "  " " " " " " " " " " "   "   "   "   "    " " " " "  " " " " " " " " " " " " " "   " !!" """ ##" $$"  %%" &&" ''" ((" ))" **" ++" ,," --" .."  //" S00" 11" 22" 33" 44" 55" 66"  77"_NAMEh88" i99" k::" G;;"REQ<<" W==" PB>>" L??" TCNTNABS@@" AA"QCBBB"STABORTCC"CANDD"MPLTEEE"DONFF" EGG"PENDHH"STSTII" RFJJ" VKK" LL" SAMM" B NN"  OO" jPP" QQ" RR"REFNEGSS"ZROTT"DMINUSEUU"NOTFOUVV"_ACTIVEWW" EXX" STK_ALLOCYY" KZZ" L[["OVF\\"OFFSET]]"PID^^"_BUF_REV_UNSUPP__"NO_ROOM``"RVDNAMEDaa" Sbb" Tcc"RTDISdd" Vee"_ERRff" Zgg" hh"_LSS_ACii"T11_BADDIRECTjj" FILEkk" IGBADFILEll"DIRSIZEmm"ERRLOCKnn"XTRAoo"NOENDpp" OVERFLOWqq"STBLOCKrr" TOOMANYBLKss" SEGtt"UNKENTuu" Bvv" LAww" xx" yy"NCALLOCkzz"ERROR{{"OUTEOF||"PROTECT}}" S~~" UCONFLICT" F" " H" ID" MISMATCH" L"ESET" N" -" ." ; " Z" j" k"  " " " " " "  " " "DOWN "NING" " >" B" m" " " " " " " " " " " "OFF "  "  "TIMSTK" RME"_ACTIVE" VN" Et#}#t# RVN1NOTMTt# Tt# t# Ut# S0_PAGING&t#AFEt#LESO t# ME t#   t# 2 t# 3 t# 5 t# 6t# Bt# Ft# Vt# Wt# et# e t# tt# ut#  t# t# t# t#  t# t# t# t# t#  t# !!t#  ""t#  ##t#DEVICE$$t# %%t#FILE&&t#NITYB ''t#TISFIED(((t# v))t# **t# Yp++t# r,,t# VE--t#  ..t#  //t#  00t# 11t# 22t# 33t# 44t#  55t#  66t# 77t# 88t# 99t# #::t# 0;;t# 2<<t# 8==t# H>>t# N??t# Q@@t# ]AAt# cBBt# gCCt# wDDt#  EEt# FFt# GGt# HHt# IIt# JJt# KKt# LLt# MMt# NNt# OOt# PPt# QQt# RRt# SSt# TTt# UUt# VVt# WWt# XXt# YYt# ZZt# [[t# \\t# ]]t# ^^t# __t#ALL``t#MBIGSYMaat# D bbt# cct# 9ddt# Eeet# Ffft# Gggt# Hhht# I iit# Wjjt# Ykkt# Zllt# [mmt# g nnt# oot# ppt# qqt# rrt# sst# ttt# uut# vvt#UMPYwwt#ERRORxxt#FILERyyt#PARTSzzt# S{{t# ETG||t# X}}t# [~~t# \t# ^t# ft#  t# UNDEFPROCt#INGRt# St# t# t# SOt#SETCLUt#NAMt#YWHATTt#BIAt#ERRORt# CAF t# mt# CPt#LAR<t# =t# >t# ?t# @t# Q t# R t# S t# T t#  t#  t#  t#  t# Nat# t#ADVANCEt#DEADPTt#NERt#INGzt#  t# t#TTERt# t# B*t# t# t#RDERRt# St# Dt#HCTXERRt#DWKt#EDULEt# t#  D> t#ING t#  t# *t# t# t# t#OPEBt# Kt# zt# {t# t#ING5 t#RATCHt# lt# t# t#_HEADERt#BUFOVFt#EEN t# 1 t# It# Jt# t# t#OLLINGt# S t# t# t# t# t# t# t# t# I@ t# Vt# Wt# tt# ut# xt# {t# }t# t# t#POLLt#NODEt#NFNDt# SYSTEMIDt# TNXCAPINGWt# DAR t# t# t# t#$SHAREt# LINKMISMt#TAEXC*t#BSFFULLt#RFAILt# PCHECKSUMt#INVPROCt# LOADFAILt#NOPROCt#TLOADt#RDUPIGNt#FMTERRt# NFt#IGNOREDt#NVPROCt#UICt# NOTFOUNDt#REMt#EARCHt# Ct# yt#  t# t# t# t# t#FAILt# t#INGt# t# t# t# CAUTHGENt#MATCHt# ISM  t#INTFAI  t#NOENTRY  t# UMOVRFLW  t#ONDK  t# mt# mt#ARYdt# xt# t# t# t# t# St# UTt#REFNEGt#OVFt# Lt#SUMM1t# 2t# 3t#TBLFULt#ION t#    t# !!t# ""t# ##t# $$t# %%t# &&t# ''t# ((t# ))t# **t# ++t#  ,,t# --t# ..t# "//t# %00t# .11t# /22t# 033t# 344t# 355t# 366t# 477t# 588t# 699t# 6 ::t# 7 ;;t# ; <<t# ?==t# @>>t# E??t# F@@t# GAAt# HBBt# HCCt# IDDt# IEEt# MFFt# NGGt# PHHt# S IIt# TJJt# VKKt# WLLt# XMMt# YNNt# ZOOt# [PPt# \QQt# ]RRt# _SSt# ` TTt# aUUt# cVVt# dWWt# fXXt# f YYt# gZZt# h[[t# i\\t# j]]t# j^^t# l__t# m``t# naat# obbt# pcct# qddt# qeet# rfft# sggt# s hht# tiit# tjjt# ukkt# vllt# wmmt# xnnt# yoot# zppt# {qqt# |rrt# }sst# ~ttt# uut# vvt# wwt# xxt#  yyt# zzt# {{t#  ||t# }}t# ~~t# t# t# t#  t# t# t# t#  t#  t# t# t# t# t# t# t# t#  t#  t#  t# t# t# t# t# t# t# t# t# t# t# St# t# Kt# }t# t# t# t#  t# t# _BINDING)t# At# OR t# t# t# t# t# t# RESTOREDt#SAVEDt# UNDEFPROCt#UPDENTt#RITYt# t# t# t#  t#  t#  t#  t# t# t# # t# 5t# 8 t# 9 t# >t# Pt# \t# ct# pt# {t# |t# |t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t#  t# t# t# t# t#  t# t# t#VIOt# Et# Nt# `t# bt# ct# ht# it# rt# t# Nt# Gt#MENTt# t# #t# )t# *t# ut# t# t# t# t# t# t# EDz t# t# St# t#_FAILt#LECT)  t#   t#   t#   t#   t# t#ABLEZt# t# ED"t# #t# $t# 5t# 6t# >t# Ft# Ht# \t# pt# qt# rt# ut# t# t#   t# !!t#  ""t#  ##t#  $$t# %%t# &&t# ''t# ((t#ION ))t# **t# : ++t# ,,t# --t# ..t# //t# 00t# 11t# 22t# 33t# VE44t# OR 55t# +66t# :77t#  S88t# F 99t#  ::t# ;;t#MODCOD<<t# RANGEZERO==t#MALRMAX>>t#NTICS??t#PHOREV@@t# AAt# BBt# CCt# DDt#ICOLONNEEt#NINONFFt# NDGGt# HHt# IIt#ABORTJJt#ERRKKt#FAILLLt#ING MMt# "NNt# xOOt# PPt# QQt# SE>RRt# TSSt# TTt# UUt# VVt#ENCE WWt#PARATE<XXt# YYt#  D/ZZt#ORS/[[t# Q\\t# ]]t#NCE^^t# __t#UENCE``t# aat# bbt#  cct#  ddt# &eet# 8fft# Bggt# Chht# [iit# ajjt# ekkt# ellt# gmmt# hnnt# ioot# kppt# qqt# rrt# sst# ttt# uut# vvt# wwt# xxt#  yyt# zzt# {{t# ||t# }}t# ~~t# t# t# t# t# t# t# t# t# t# t#  S/t#TIAL t# {t# t# t# t# t# t# t#  LYt#RIAL t# t# t#IZATIONt# t#NUMt#UNAVt#VERt# t# t# t# t# t# t# t#  t#  t#  t# t# t# t#  t# t#  t# t# t#  t# "t# )t# *t# +t# .t# 8 t# 9 t# ;t# <t# =t# Bt# Ct# Ft# Gt# Ot# Ot# Pt# Rt# Zt# \t# qt# rt# st# {t# |t# |t# t# t# t# t#  t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t#EXITt# St#INITt# NOTACTIVEt# IFYt#RESTARTt# S4t#HUTDOWN t#TARTTt# INGUPt# TERMINATED t#_STOPt#XISTS t#_ERRt#ICEt# t#  t#  t#  t#  t#  t#  t# t# t#  t#   t# #  t# %  t# &  t# (  t# * t# *t# =t# >t# ?t# @t# @t# Et# Gt# Mt# Qt# _t# it# j t# kt# kt# lt# {t# }  t# }!!t# ~""t# ##t# $$t#  %%t# &&t# ''t# ((t#  ))t#  **t#  ++t#  ,,t# --t# ..t# //t# 00t# 11t# 22t# 33t#  44t# 55t#  66t# 77t# 88t#  99t#  ::t# ;;t# <<t# ==t# >>t# ??t# @@t# AAt# SBBt# ?CCt# cDDt# fEEt# FFt# GGt# NGHHt#SLIM IIt#SIONJJt# KKt#  LLt#  MMt#  NNt# OOt# PPt# )QQt# * RRt# bSSt# c TTt# d UUt# VVt# WWt# XXt# YYt# ZZt# [[t# \\t# ]]t# ^^t# __t# ``t# aat# Tbbt# cct# ddt# eet# fft#  ggt#  hht#  iit#  jjt#  kkt# llt# mmt# nnt# oot# ppt# qqt# rrt#  sst# ttt# uut# vvt# wwt# xxt# yyt#  zzt# {{t#  ||t# }}t# ~~t# t# t# t# t# t# t#  t# "t# $t# % t# %t# %t# &t# &t# 't# (t# - t# .t# . t# .t# 0t# 0t# 2t# 8t# 9t# < t# =t# ?t# @ t# Et# H t# Ht# J t# Kt# Lt# Nt# Qt# Vt# Yt# Zt# [t# [t# \t# \t# ]t# ]t# ^t# ^t# _t# _t# _t# `t# `t# at# at# bt# ct# ct# dt# dt# f t# ft# gt# gt# ht# it# lt# mt# o t# pt# p t# st# tt# tt# tt# wt# wt# xt# xt# {t# {t# | t# } t# t# t# t# t#  t# t# t# t# t# t# t#  t# t# t# t#  t# t#  t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t#  t# t# t# t# t# t# t# t#  t# t# t# t# t# t# t# t# t# t# t# t# t#   t#   t#   t#   t#   t# t# t# t# t# t# t# t# t#  t# t#  t# t#  t# t# t# t# t# t#   t# !!t# ""t# ##t#  $$t#BOOTERR;%%t#CKT&&t#FLGERR ''t#IMR((t# ))t#KEY**t#LIMIT++t#ONG,,t#MAX--t# ..t# IN//t# 00t#PRV11t# 22t#QUOERR33t# S#44t# 55t#TABLE66t# 77t#ING 88t# 99t# ::t# ;;t# '<<t# *==t# +>>t# 3??t# t@@t# AAt# BBt# CCt# DDt# EEt# S+FFt# GGt# HHt# IIt# JJt# KKt# LLt# MMt# UP NNt# %OOt# pPPt# QQt#  RRt#ERRSSt#VERE(TTt# UUt#ITYVVt#  WWt# XXt#INVALDYYt#FTCIRCoZZt#NFINSp[[t#LCTq\\t#SELr]]t#REFs^^t#REMt__t# HADBOOTFAIL``t# DETINCONaat# FEATNOMNTbbt# OW cct# ddt# eet# fft# ggt# hht# "iit# #jjt# $kkt# %llt# &mmt# 'nnt# (oot# .ppt# ?qqt# @ rrt# J sst# Vttt# Xuut# Yvvt# [wwt# [xxt# \yyt# ^zzt# _{{t# _||t# `}}t# a~~t# at# bt# bt# ct# dt# et# | t# } t# t# t# t# t# t# t# t# t# t# t# t#  t# t# t# t# t# EDGt#FAILt#INGt# t# t#  t# dt# et# t# t# t#  t# t#LBSt#SCBt# t# UNSTABLEt#ZEROMBR t#RCONF!t# E6t# 7t# 8 t# t# t#ABLEt#  t# t# t# t# t#  t#  t# )t# *t# ,t# -t# 1t# 5t# 5t# 6t# 7 t# 8t# 9t# :t# <t# =t# ?t# @t# @t# At# Bt# Et# Gt# It# Jt# Lt# Ot# V t# Wt# \t# ]t# mt# }t# ~t# t# t# t# t#  t# t# t# t# t# t# t#  t# t# t# t# t# t# t# t# t#  t# t# t# D!t# .t# /t# 9t# ?t# ^ t# lt# yt# zt# t# t# t# t# t# t# t# t# t#ING5t# ^t# h t# q t# t#SINGMBR"t# DWCOPYREQ#t#INCVOL$t#MEMCOPY%t#ERGE&  t#FAIL'  t#MCPYa  t#SUCC(  t#NOMCPYb  t# REQALLOC?t# ELFERROR)t#VED)t# *t# +t# ,t# yt# t# t#IFT?t# @t# Dt# Et#LVSTATE,t#MDBLUSE-t# EMt# GSNOTMAP.t#NOTCNCT/t#ORT*  t# 0!!t# Y""t# u##t# $$t# %%t# &&t# ''t# ((t#BITMAP))t#LOCK0**t#DUMP ++t# 1,,t# EN%--t# l..t# //t# 00t# 11t# ED22t# 33t# Rh44t# 55t#LDUMP!66t#ULD77t# .88t# D99t# a::t# v;;t# y<<t# ==t# >>t# N??t# @@t# W2AAt# 3BBt# 4CCt# IDDt# EEt# FFt# GGt# HHt# IIt# JJt#  KKt#ERR3LLt# 4MMt#INGNNt#_BUFFEROOt#ERR2PPt# R5QQt#CNTNEG6RRt#PYIGN7SSt# IDMISMAT8TTt#NOFFUUt#SYS9VVt#PSCLNG:WWt# IXXt#REF;YYt#SEPCLU<ZZt# [[t#YMFND5\\t# =]]t#REF>^^t#TRA?__t#WRNERS@``t#TALIGNVaat# UTbbt# Acct# P ddt# eet#DOWN/fft# = ggt# Bhht# Uiit# jjt# kkt#TING llt# Bmmt# Jnnt# Poot# ppt# IDCqqt#NOTVLDCrrt# GN5sst# ~ttt# uut# vvt# AL5wwt# Dxxt# yyt#  zzt# {{t# ||t# ED}}t#TUREe~~t# ht# it# jt# {t# t# EDt#NOSYMht#O_ARGDt#SEMPTYit#WTYPjt#LENTCMDt#MPLIFYt# ULTANEOUSLYt#NCEt# t# t#GLEt# "t# Mt# at# t# X}t# t# ZEt# Et# t# t#  t# t# t# t# t# t# t# t# $t# $ t# (t# *t# + t# 1 t# ? t# Et# Jt# Lt# Mt# Mt# Tt# Vt# ^t# _t# `t# `t# ft# mt# mt# t#  t# E####SIZE# # # # # #  #  #  #  #  #  # # # # # # # # #  # # #  # # # # # # #  # !!# ""#  ""t#  ##t#DEVICE$$t# %%t#FILE&&t#NITYB ''t#TISFIED(((t# v))t# **t# Yp++t# r,,t# VE--t#  ..t#  //t#  00t# 11t# 22t# 33t# 44t#  55t#  66t# 77t# 88t# 99t# #::t# 0;;t# 2<<t# 8==t# H>>t# N??t# Q@@t# ]AAt# cBBt# gCCt# wDDt#  EEt# FFt# GGt# HHt# IIt# JJt# KKt# LLt# MMt# NNt# OOt# PPt# QQt# RRt# SSt# TTt# UUt# VVt# WWt# XXt# YYt# ZZt# [[t# \\t# ]]t# ^^t# __t#ALL``t#MBIGSYMaat# D bbt# cct# 9ddt# Eeet# Ffft# Gggt# Hhht# I iit# Wjjt# Ykkt# Zllt# [mmt# g nnt# oot# ppt# qqt# rrt# sst# ttt# uut# vvt#UMPYwwt#ERRORxxt#FILERyyt#PARTSzzt# S{{t# ETG||t# X}}t# [~~t# \t# ^t# ft#  t# UNDEFPROCt#INGRt# St# t# t# SOt#SETCLUt#NAMt#YWHATTt#BIAt#ERRORt# CAF t# mt# CPt#LAR<t# =t# >t# ?t# @t# Q t# R t# S t# T t#  t#  t#  t#  t# Nat# t#ADVANCEt#DEADPTt#NERt#INGzt#  t# t#TTERt# t# B*t# t# t#RDERRt# St# Dt#HCTXERRt#DWKt#EDULEt# t#  D> t#ING t#  t# *t# t# t# t#OPEBt# Kt# zt# {t# t#ING5 t#RATCHt# lt# t# t#_HEADERt#BUFOVFt#EEN t# 1 t# It# Jt# t# t#OLLINGt# S t# t# t# t# t# t# t# t# I@ t# Vt# Wt# tt# ut# xt# {t# }t# t# t#POLLt#NODEt#NFNDt# SYSTEMIDt# TNXCAPINGWt# DAR t# t# t# t#$SHAREt# LINKMISMt#TAEXC*t#BSFFULLt#RFAILt# PCHECKSUMt#INVPROCt# LOADFAILt#NOPROCt#TLOADt#RDUPIGNt#FMTERRt# NFt#IGNOREDt#NVPROCt#UICt# NOTFOUNDt#REMt#EARCHt# Ct# yt#  t# t# t# t# t#FAILt# t#INGt# t# t# t# CAUTHGENt#MATCHt# ISM  t#INTFAI  t#NOENTRY  t# UMOVRFLW  t#ONDK  t# mt# mt#ARYdt# xt# t# t# t# t# St# UTt#REFNEGt#OVFt# Lt#SUMM1t# 2t# 3t#TBLFULt#ION t#    t# !!t# ""t# ##t# $$t# %%t# &&t# ''t# ((t# ))t# **t# ++t#  ,,t# --t# ..t# "//t# %00t# .11t# /22t# 033t# 344t# 355t# 366t# 477t# 588t# 699t# 6 ::t# 7 ;;t# ; <<t# ?==t# @>>t# E??t# F@@t# GAAt# HBBt# HCCt# IDDt# IEEt# MFFt# NGGt# PHHt# S IIt# TJJt# VKKt# WLLt# XMMt# YNNt# ZOOt# [PPt# \QQt# ]RRt# _SSt# ` TTt# aUUt# cVVt# dWWt# fXXt# f YYt# gZZt# h[[t# i\\t# j]]t# j^^t# l__t# m``t# naat# obbt# pcct# qddt# qeet# rfft# sggt# s hht# tiit# tjjt# ukkt# vllt# wmmt# xnnt# yoot# zppt# {qqt# |rrt# }sst# ~ttt# uut# vvt# wwt# xxt#  yyt# zzt# {{t#  ||t# }}t# ~~t# t# t# t#  t# t# t# t#  t#  t# t# t# t# t# t# t# t#  t#  t#  t# t# t# t# t# t# t# t# t# t# t# St# t# Kt# }t# t# t# t#  t# t# _BINDING)t# At# OR t# t# t# t# t# t# RESTOREDt#SAVEDt# UNDEFPROCt#UPDENTt#RITYt# t# t# t#  t#  t#  t#  t# t# t# # t# 5t# 8 t# 9 t# >t# Pt# \t# ct# pt# {t# |t# |t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t#  t# t# t# t# t#  t# t# t#VIOt# Et# Nt# `t# bt# ct# ht# it# rt# t# Nt# Gt#MENTt# t# #t# )t# *t# ut# t# t# t# t# t# t# EDz t# t# St# t#_FAILt#LECT)  t#   t#   t#   t#   t# t#ABLEZt# t# ED"t# #t# $t# 5t# 6t# >t# Ft# Ht# \t# pt# qt# rt# ut# t# t#   t# !!t#  ""t#  ##t#  $$t# %%t# &&t# ''t# ((t#ION ))t# **t# : ++t# ,,t# --t# ..t# //t# 00t# 11t# 22t# 33t# VE44t# OR 55t# +66t# :77t#  S88t# F 99t#  ::t# ;;t#MODCOD<<t# RANGEZERO==t#MALRMAX>>t#NTICS??t#PHOREV@@t# AAt# BBt# CCt# DDt#ICOLONNEEt#NINONFFt# NDGGt# HHt# IIt#ABORTJJt#ERRKKt#FAILLLt#ING MMt# "NNt# xOOt# PPt# QQt# SE>RRt# TSSt# TTt# UUt# VVt#ENCE WWt#PARATE<XXt# YYt#  D/ZZt#ORS/[[t# Q\\t# ]]t#NCE^^t# __t#UENCE``t# aat# bbt#  cct#  ddt# &eet# 8fft# Bggt# Chht# [iit# ajjt# ekkt# ellt# gmmt# hnnt# ioot# kppt# qqt# rrt# sst# ttt# uut# vvt# wwt# xxt#  yyt# zzt# {{t# ||t# }}t# ~~t# t# t# t# t# t# t# t# t# t# t#  S/t#TIAL t# {t# t# t# t# t# t# t#  LYt#RIAL t# t# t#IZATIONt# t#NUMt#UNAVt#VERt# t# t# t# t# t# t# t#  t#  t#  t# t# t# t#  t# t#  t# t# t#  t# "t# )t# *t# +t# .t# 8 t# 9 t# ;t# <t# =t# Bt# Ct# Ft# Gt# Ot# Ot# Pt# Rt# Zt# \t# qt# rt# st# {t# |t# |t# t# t# t# t#  t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t#EXITt# St#INITt# NOTACTIVEt# IFYt#RESTARTt# S4t#HUTDOWN t#TARTTt# INGUPt# TERMINATED t#_STOPt#XISTS t#_ERRt#ICEt# t#  t#  t#  t#  t#  t#  t# t# t#  t#   t# #  t# %  t# &  t# (  t# * t# *t# =t# >t# ?t# @t# @t# Et# Gt# Mt# Qt# _t# it# j t# kt# kt# lt# {t# }  t# }!!t# ~""t# ##t# $$t#  %%t# &&t# ''t# ((t#  ))t#  **t#  ++t#  ,,t# --t# ..t# //t# 00t# 11t# 22t# 33t#  44t# 55t#  66t# 77t# 88t#  99t#  ::t# ;;t# <<t# ==t# >>t# ??t# @@t# AAt# SBBt# ?CCt# cDDt# fEEt# FFt# GGt# NGHHt#SLIM IIt#SIONJJt# KKt#  LLt#  MMt#  NNt# OOt# PPt# )QQt# * RRt# bSSt# c TTt# d UUt# VVt# WWt# XXt# YYt# ZZt# [[t# \\t# ]]t# ^^t# __t# ``t# aat# Tbbt# cct# ddt# eet# fft#  ggt#  hht#  iit#  jjt#  kkt# llt# mmt# nnt# oot# ppt# qqt# rrt#  sst# ttt# uut# vvt# wwt# xxt# yyt#  zzt# {{t#  ||t# }}t# ~~t# t# t# t# t# t# t#  t# "t# $t# % t# %t# %t# &t# &t# 't# (t# - t# .t# . t# .t# 0t# 0t# 2t# 8t# 9t# < t# =t# ?t# @ t# Et# H t# Ht# J t# Kt# Lt# Nt# Qt# Vt# Yt# Zt# [t# [t# \t# \t# ]t# ]t# ^t# ^t# _t# _t# _t# `t# `t# at# at# bt# ct# ct# dt# dt# f t# ft# gt# gt# ht# it# lt# mt# o t# pt# p t# st# tt# tt# tt# wt# wt# xt# xt# {t# {t# | t# } t# t# t# t# t#  t# t# t# t# t# t# t#  t# t# t# t#  t# t#  t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t# t#  t# t# t# t# t# t# t# t#  t# t# t# t# t# t# t# t# t# t# t# t# t#   t#   t#   t#   t#   t# t# t# t# t# t# t# t# t#  t# t#  t# t#  t# t# t# t# t# t#   t# !!t# ""t# ##t#  $$t#BOOTERR;%%t#CKT&&t#FLGERR ''t#IMR((t# ))t#KEY**t#LIMIT++t#ONG,,t#MAX--t# ..t# IN//t# 00t#PRV11t# 22t#QUOERR33t# S#44t# 55t#TABLE66t# 77t#ING 88t# 99t# ::t# ;;t# '<<t# *==t# +>>t# 3??t# t@@t# AAt# BBt# CCt# DDt# EEt# S+FFt# GGt# HHt# IIt# JJt# KKt# LLt# MMt# UP NNt# %OOt# pPPt# QQt#  RRt#ERRSSt#VERE(TTt# UUt#ITYVVt#  WWt# XXt#INVALDYYt#FTCIRCoZZt#NFINSp[[t#LCTq\\t#SELr]]t#REFs^^t#REMt__t# HADBOOTFAIL``t# DETINCONaat# FEATNOMNTbbt# OW cct# ddt# eet# fft# ggt# hht# "iit# #jjt# $kkt# %llt# &mmt# 'nnt# (oot# .ppt# ?qqt# @ rrt# J sst# Vttt# Xuut# Yvvt# [wwt# [xxt# \yyt# ^zzt# _{{t# _||t# `}}t# a~~t# at# bt# bt# ct# dt# et# | t# } t# t# t# t# t# t# t# t# t# t# t# t#  t# t# t# t# t# EDGt#FAILt#INGt# t# t#  t# dt# et# t# t# t#  t# t#LBSt#SCBt# t# UNSTABLEt#ZEROMBR t#RCONF!t# E6t# 7t# 8 t# t# t#ABLEt#  t# t# t# t# t#  t#  t# )t# *t# ,t# -t# 1t# 5t# 5t# 6t# 7 t# 8t# 9t# :t# <t# =t# ?t# @t# @t# At# Bt# Et# Gt# It# Jt# Lt# Ot# V t# Wt# \t# ]t# mt# }t# ~t# t# t# t# t#  t# t# t# t# t# t# t#  t# t# t# t# t# t# t# t# t#  t# t# t# D!t# .t# /t# 9t# ?t# ^ t# lt# yt# zt# t# t# t# t# t# t# t# t# t#ING5t# ^t# h t# q t# t#SINGMBR"t# DWCOPYREQ#t#INCVOL$t#MEMCOPY%t#ERGE&  t#FAIL'  t#MCPYa  t#SUCC(  t#NOMCPYb  t# REQALLOC?t# ELFERROR)t#VED)t# *t# +t# ,t# yt# t# t#IFT?t# @t# Dt# Et#LVSTATE,t#MDBLUSE-t# EMt# GSNOTMAP.t#NOTCNCT/t#ORT*  t# 0!!t# Y""t# u##t# $$t# %%t# &&t# ''t# ((t#BITMAP))t#LOCK0**t#DUMP ++t# 1,,t# EN%--t# l..t# //t# 00t# 11t# ED22t# 33t# Rh44t# 55t#LDUMP!66t#ULD77t# .88t# D99t# a::t# v;;t# y<<t# ==t# >>t# N??t# @@t# W2AAt# 3BBt# 4CCt# IDDt# EEt# FFt# GGt# HHt# IIt# JJt#  KKt#ERR3LLt# 4MMt#INGNNt#_BUFFEROOt#ERR2PPt# R5QQt#CNTNEG6RRt#PYIGN7SSt# IDMISMAT8TTt#NOFFUUt#SYS9VVt#PSCLNG:WWt# IXXt#REF;YYt#SEPCLU<ZZt# [[t#YMFND5\\t# =]]t#REF>^^t#TRA?__t#WRNERS@``t#TALIGNVaat# UTbbt# Acct# P ddt# eet#DOWN/fft# = ggt# Bhht# Uiit# jjt# kkt#TING llt# Bmmt# Jnnt# Poot# ppt# IDCqqt#NOTVLDCrrt# GN5sst# ~ttt# uut# vvt# AL5wwt# Dxxt# yyt#  zzt# {{t# ||t# ED}}t#TUREe~~t# ht# it# jt# {t# t# EDt#NOSYMht#O_ARGDt#SEMPTYit#WTYPjt#LENTCMDt#MPLIFYt# ULTANEOUSLYt#NCEt# t# t#GLEt# "t# Mt# at# t# X}t# t# ZEt# Et# t# t#  t# t# t# t# t# t# t# t# $t# $ t# (t# *t# + t# 1 t# ? t# Et# Jt# Lt# Mt# Mt# Tt# Vt# ^t# _t# `t# `t# ft# mt# mt# t#  t# E#}1$#SIZED# # KCF# EW# IPB#DBGTBTG#EDBGTBTH#PED9 # F # I # K # P # f# f# i# m# # # #  #  # #ING#PDATJ#ERLEVT#LASH# VE# # # #  # !!# ""#ICED### OT@ $$# V%%# W&&# p''# t((# u))# **# ++# ,,#WRESPK--# S..#MALL//# 00# 11#  22#  33# !44# "55# ( 66# 277# L88# W99# o::#  ;;# <<# ==# >># ??# @@# AA# ER*BB#PAGELCC# G$PDD# I<EE# BFF# NGG# HH# NAc II# d JJ# DEXTAUTH"KK#OPRERRMLL#OCKETMM#FTRERRSNNN#WARE OO# 8PP# A QQ# ORR# PSS# [TT# j UU# vVV#  WW# XX# YY# ZZ# [[#  \\# ]]# ^^# __#ERRSQ``# LCONNECTRaa#ICITED|bb# cc#ING4dd#OPENSee# READLINETff#TIMEOUTUgg#WAITINGVhh# MEii# jj# + kk# / ll# 9mm# U nn# coo# ppp# qq# rr# ss# tt# uu# vv# ww# xx# yy# zz# RTW{{# `||# e}}# ~~# # # # ALLOCMEMW# EDW# RRX#INGX#URCE # # # /# R# Y# `# `# ~# # # # #  # # #LINE# Y#PACE# #  #  # # # #  # # # ## , # -# . # ? # @# C# I# J# K # R# _# c # f# g# v# z# # #  # # # # #  # #  # # # # #  # #  # # #  # # # #NNED# # WN[# b# y# # # EDZ#ING#CIVC[# D\# F]# I^# K_# P`# Sa# Xb#MISc#OVRd#SISe#DNOTSETf# EC # # # #  # #  #  #  #  #  #  # # # #  # # # #  #  #  # "# ## ## %# &# '# )# * # +# , # ,# - # -# /# 0 # 3 # 4# 5# 8# :# =  # >  # ?   # ?  # E  # E# F# F# G# H# H# K # M # M# N# N# P # P # Q # Q# Q# Q# Q# R  # T!!# T""# V### W$$# X %%# ]&&# `''# `((# a))# b **# c ++# c,,# d--# d ..# g//# h00# h11# i22# k 33# k44# l 55# l66# l77# n88# o99# q::# t;;# u <<# w ==# w>># w??# z@@# | AA# BB#  CC#  DD#  EE# FF# GG# HH# II# JJ# KK# LL# MM# NN# OO# PP#  QQ# RR# SS# TT# UU#  VV# WW# XX# YY# ZZ#  [[# \\# ]]# ^^# __# ``# aa# bb# cc# dd# ee# ff# gg# hh# ii# jj#  kk# ll# mm# nn# oo#  pp#  qq#  rr#  ss#  tt# uu#  vv# ww# xx# yy# zz# {{# ||# }}#  ~~# # # # # # # # # # # # # # # #  # # #  #  #  #  #  # #  # # #  # # #  # # #  # #  # # # #  # #  # # #  #  # # # # # # # # # # # # # # # #  # # # # #DEVg# IRh#IAL # # #FIC# # c# o# u# # # # # ATION # #  # #  #  #  # # # #  #  #  # "# $ # %# &# '# '# (# )# /# /# 0# 7# : # I# V # [# ]# ^# _# _# a # a# b# c# d# e# k# l# l# m# n# o# p# { # ~# # # # # # # # # # #   #   #   #   #   # # # # # #  # # # # # # #  #  # #  # # #   # !!#  ""# SR### $$# ED %%#  &&# ''# ((# ))#  **#  ++#  ,,#  --# ..# //# 00#  11# 22# 33# 44# 55# 66#  77#  88#  99# ::# ;;#  <<# ==# #>># #??# $@@# $AA# )BB# )CC# )DD# *EE# ,FF# -GG# 3 HH# 3II# 7JJ# 7KK# 8LL# 9MM# :NN# <OO# =PP# =QQ# ?RR# BSS# BTT# DUU# DVV# DWW# EXX# GYY# HZZ# H[[# I\\# K]]# K^^# L__# M``# Maa# Mbb# Ncc# Ndd# Oee# Off# Qgg# Rhh# Uii# Vjj# Zkk# [ll# ] mm# ^ nn# _oo# _pp# bqq# b rr# css# dtt# duu# evv# fww# fxx# gyy# gzz# h{{# j||# k}}# k~~# m # m# n# p# r # s# u# w # w# y# y# y# |# |# ~ # ~# # # # # #  #  # # # # # # # #  #  # #  # # # # #  # # #  # # # # #  # # # # # # # # # # # # # # # # # # # # # # # # # # # #  # # # # # # # # # # # #  # # # # # # # # # # # # # # # # # # #  #  # # # # # # # # # # # # # # #  # # #  # # # # # # # # #  #  RB#  S# M# Y#   # 1  # F  # G  # H  # J# a# i# j# y#  #  # # # # # # #  # #INGI# # #LBLj  #NODEk!!# S""#WILDl### EDf$$# %%#LLING'&&# L''# T((# U))# ]**# e++# s,,# --# ..#F_TOBIGm//# INo00# p11# q22# r33# s44#LOCK55# 66# 77#  S88#WAITC 99# Ln::#ACQERRo;;#IPLHIGHp<<#LOWq==#RELERRr>>#STERRs??#NAMLNGt@@#OOLnAA# BB# EDuCC#  DD#  EE# EVuFF# R GG# HH# T*II#ERRSvJJ# SKK#  LL#FULLwMM#NOTFNDxNN#WNFAILyOO# IOzPP# QO- QQ# {RR#UALERR|SS# RE}TT# UU#ROONEG}VV#RCLIN~WW# EuXX#MBRADDYY# EMZZ#TIWA[[#VALLOAD\\#CNODE]]#DIS^^# MISMATCH__# REPLYTIMEOUT``# SAMISSINGaa#NOTAUTHbb#TEOVcc#CHANGEdd#ERRORee#FAILff# INOTGRANTEDdgg#HELDhh# Lii# jj# kk# ll# NAMTRUNCmm# Rnn#VEXCEPToo#TABLEpp# qq#EXCrr# CKss# tt# uu# vv# ww# :xx# Vyy# X zz# Y{{# Y ||# Z }}# `~~# b# e# {# # # # # # # # # # # # # # # # # # # # # #  #  #  #  # #DUMP#NTFND#OVER# F# GEn# o#INGJ# LE# #ITUDF# MP#NDALONE # RD #  #  # RT#  # # &# 9 # R# _# `# c# n# # # # # #DELETE# ED# )# D # X# `# b# b# d# e# # # # # # # # # # # # # #ING#  # # )# 1# 8# K# T# V# x# y# # # # # # # # # # #RECORD# UPE # E# V # `#  #  # # #  # # #  #VERIFY#_BLOCK# SMALLMEM# TE# # #  # # #  # # %# ,# D# E# G # G # P# d# p# # #   #   #   #   #   # #  # # # # #  # #  #  # #MENT# # # # #  # $# %  # D!!# G""# G### G$$# H%%# K&&# L''# P((# S))# T**# W++# X,,# ]--# ^..# _//# `00# `11# a22# b33# c44# d55# l66# o77# p88# q99# s::# u;;# v<<# x==# z>># ~ ??# @@# AA#  BB# CC# DD# EE# FF# GG#  HH#  II# JJ# KK# LL# MM#  S;NN# >OO# PP#NTSVDQQ#_UNKRR# IC! SS# ONTT# UU#STIC|VV#  SWW# XX# YY#OOLONGZZ# US[[#  \\# ]]# ^^# 6__# 8``# 9aa# 9bb# Acc# Add# C ee# Eff# Egg# F hh# Fii# Gjj# Hkk# Ill# Imm# Jnn# Joo# Kpp# Kqq# Lrr# Lss# Mtt# Muu# Nvv# Oww# Pxx# Qyy# Rzz# S{{# T||# U}}# W~~# Z# b# m# m# r # {# |# ~# #  # # # # # # # # # # # # # # # # # # # # # # # # # # #  # # # # #  # # # # # # Y# B# #CMUSFOLl# D#ISPIC# EP#GTRUNC#ILL # 6# A# e# f# # # # #KEYS#KBNDEXC#FRMREF# NOTCHANGE#OVF# # LO#MRECFMT# NOTAVAIL#OCK# P# E # G # T# # # #PED&# _# d # # # #  #  # #  # R#ING# F #RAGE # # # # # $ # +# 9# :# ;# <# P# P# z# # # # # # # # # # #CODLAB# E# A# L# T# # # # D# # # #_VPS1 #PCLU#INVALD# R#CPYERR#EAM # # 2# V # f   # g  # }  #    #   # #  # # # # # #ING# # # #  # # # # #  # #   #  !!# ""# ### $$# %%#  &&#  ''#  ((#  ))# **# ++# ,,# --# ..# //#  00# 11# 22# 33#  44#  55#  66# 77# 88# " 99# " ::# # ;;# $ <<# &==# ,>># -??# -@@# 0AA# 3BB# 4CC# 5DD# 6EE# 7FF# 7GG# 9HH# :II# < JJ# >KK# ?LL# B MM# BNN# COO# CPP# EQQ# FRR# FSS# GTT# GUU# HVV# KWW# LXX# QYY# SZZ# `[[# a\\# f]]# f^^# j__# m``# paa# ubb# ycc# ydd# yee# yff# ~gg# hh# ii# jj# kk#  ll# mm# nn# oo# pp# qq# rr# ss# tt#  uu# vv#  ww# xx#  yy#  zz# {{#  ||# }}#  ~~#  # #  # # # # # # # # # # # # #  # # # # #  # # # # # # #  # # # # # # #  # #  # # # # # # # # # # # # # # # # # # # # # # #  # # # # # # # #  # #  #  #  # # # #  # # # # # # #  # # E1$<p$1$STRING1$ 1$ 1$  1$ 1$ 1$ 1$  1$  1$  1$   1$  1$ 1$ f# f# i# m# # # #  #  # #ING#PDATJ#ERLEVT#LASH# VE# # # #  # !!# ""#ICED### OT@ $$# V%%# W&&# p''# t((# u))# **# ++# ,,#WRESPK--# S..#MALL//# 00# 11#  22#  33# !44# "55# ( 66# 277# L88# W99# o::#  ;;# <<# ==# >># ??# @@# AA# ER*BB#PAGELCC# G$PDD# I<EE# BFF# NGG# HH# NAc II# d JJ# DEXTAUTH"KK#OPRERRMLL#OCKETMM#FTRERRSNNN#WARE OO# 8PP# A QQ# ORR# PSS# [TT# j UU# vVV#  WW# XX# YY# ZZ# [[#  \\# ]]# ^^# __#ERRSQ``# LCONNECTRaa#ICITED|bb# cc#ING4dd#OPENSee# READLINETff#TIMEOUTUgg#WAITINGVhh# MEii# jj# + kk# / ll# 9mm# U nn# coo# ppp# qq# rr# ss# tt# uu# vv# ww# xx# yy# zz# RTW{{# `||# e}}# ~~# # # # ALLOCMEMW# EDW# RRX#INGX#URCE # # # /# R# Y# `# `# ~# # # # #  # # #LINE# Y#PACE# #  #  # # # #  # # # ## , # -# . # ? # @# C# I# J# K # R# _# c # f# g# v# z# # #  # # # # #  # #  # # # # #  # #  # # #  # # # #NNED# # WN[# b# y# # # EDZ#ING#CIVC[# D\# F]# I^# K_# P`# Sa# Xb#MISc#OVRd#SISe#DNOTSETf# EC # # # #  # #  #  #  #  #  #  # # # #  # # # #  #  #  # "# ## ## %# &# '# )# * # +# , # ,# - # -# /# 0 # 3 # 4# 5# 8# :# =  # >  # ?   # ?  # E  # E# F# F# G# H# H# K # M # M# N# N# P # P # Q # Q# Q# Q# Q# R  # T!!# T""# V### W$$# X %%# ]&&# `''# `((# a))# b **# c ++# c,,# d--# d ..# g//# h00# h11# i22# k 33# k44# l 55# l66# l77# n88# o99# q::# t;;# u <<# w ==# w>># w??# z@@# | AA# BB#  CC#  DD#  EE# FF# GG# HH# II# JJ# KK# LL# MM# NN# OO# PP#  QQ# RR# SS# TT# UU#  VV# WW# XX# YY# ZZ#  [[# \\# ]]# ^^# __# ``# aa# bb# cc# dd# ee# ff# gg# hh# ii# jj#  kk# ll# mm# nn# oo#  pp#  qq#  rr#  ss#  tt# uu#  vv# ww# xx# yy# zz# {{# ||# }}#  ~~# # # # # # # # # # # # # # # #  # # #  #  #  #  #  # #  # # #  # # #  # # #  # #  # # # #  # #  # # #  #  # # # # # # # # # # # # # # # #  # # # # #DEVg# IRh#IAL # # #FIC# # c# o# u# # # # # ATION # #  # #  #  #  # # # #  #  #  # "# $ # %# &# '# '# (# )# /# /# 0# 7# : # I# V # [# ]# ^# _# _# a # a# b# c# d# e# k# l# l# m# n# o# p# { # ~# # # # # # # # # # #   #   #   #   #   # # # # # #  # # # # # # #  #  # #  # # #   # !!#  ""# SR### $$# ED %%#  &&# ''# ((# ))#  **#  ++#  ,,#  --# ..# //# 00#  11# 22# 33# 44# 55# 66#  77#  88#  99# ::# ;;#  <<# ==# #>># #??# $@@# $AA# )BB# )CC# )DD# *EE# ,FF# -GG# 3 HH# 3II# 7JJ# 7KK# 8LL# 9MM# :NN# <OO# =PP# =QQ# ?RR# BSS# BTT# DUU# DVV# DWW# EXX# GYY# HZZ# H[[# I\\# K]]# K^^# L__# M``# Maa# Mbb# Ncc# Ndd# Oee# Off# Qgg# Rhh# Uii# Vjj# Zkk# [ll# ] mm# ^ nn# _oo# _pp# bqq# b rr# css# dtt# duu# evv# fww# fxx# gyy# gzz# h{{# j||# k}}# k~~# m # m# n# p# r # s# u# w # w# y# y# y# |# |# ~ # ~# # # # # #  #  # # # # # # # #  #  # #  # # # # #  # # #  # # # # #  # # # # # # # # # # # # # # # # # # # # # # # # # # # #  # # # # # # # # # # # #  # # # # # # # # # # # # # # # # # # #  #  # # # # # # # # # # # # # # #  # # #  # # # # # # # # #  #  RB#  S# M# Y#   # 1  # F  # G  # H  # J# a# i# j# y#  #  # # # # # # #  # #INGI# # #LBLj  #NODEk!!# S""#WILDl### EDf$$# %%#LLING'&&# L''# T((# U))# ]**# e++# s,,# --# ..#F_TOBIGm//# INo00# p11# q22# r33# s44#LOCK55# 66# 77#  S88#WAITC 99# Ln::#ACQERRo;;#IPLHIGHp<<#LOWq==#RELERRr>>#STERRs??#NAMLNGt@@#OOLnAA# BB# EDuCC#  DD#  EE# EVuFF# R GG# HH# T*II#ERRSvJJ# SKK#  LL#FULLwMM#NOTFNDxNN#WNFAILyOO# IOzPP# QO- QQ# {RR#UALERR|SS# RE}TT# UU#ROONEG}VV#RCLIN~WW# EuXX#MBRADDYY# EMZZ#TIWA[[#VALLOAD\\#CNODE]]#DIS^^# MISMATCH__# REPLYTIMEOUT``# SAMISSINGaa#NOTAUTHbb#TEOVcc#CHANGEdd#ERRORee#FAILff# INOTGRANTEDdgg#HELDhh# Lii# jj# kk# ll# NAMTRUNCmm# Rnn#VEXCEPToo#TABLEpp# qq#EXCrr# CKss# tt# uu# vv# ww# :xx# Vyy# X zz# Y{{# Y ||# Z }}# `~~# b# e# {# # # # # # # # # # # # # # # # # # # # # #  #  #  #  # #DUMP#NTFND#OVER# F# GEn# o#INGJ# LE# #ITUDF# MP#NDALONE # RD #  #  # RT#  # # &# 9 # R# _# `# c# n# # # # # #DELETE# ED# )# D # X# `# b# b# d# e# # # # # # # # # # # # # #ING#  # # )# 1# 8# K# T# V# x# y# # # # # # # # # # #RECORD# UPE # E# V # `#  #  # # #  # # #  #VERIFY#_BLOCK# SMALLMEM# TE# # #  # # #  # # %# ,# D# E# G # G # P# d# p# # #   #   #   #   #   # #  # # # # #  # #  #  # #MENT# # # # #  # $# %  # D!!# G""# G### G$$# H%%# K&&# L''# P((# S))# T**# W++# X,,# ]--# ^..# _//# `00# `11# a22# b33# c44# d55# l66# o77# p88# q99# s::# u;;# v<<# x==# z>># ~ ??# @@# AA#  BB# CC# DD# EE# FF# GG#  HH#  II# JJ# KK# LL# MM#  S;NN# >OO# PP#NTSVDQQ#_UNKRR# IC! SS# ONTT# UU#STIC|VV#  SWW# XX# YY#OOLONGZZ# US[[#  \\# ]]# ^^# 6__# 8``# 9aa# 9bb# Acc# Add# C ee# Eff# Egg# F hh# Fii# Gjj# Hkk# Ill# Imm# Jnn# Joo# Kpp# Kqq# Lrr# Lss# Mtt# Muu# Nvv# Oww# Pxx# Qyy# Rzz# S{{# T||# U}}# W~~# Z# b# m# m# r # {# |# ~# #  # # # # # # # # # # # # # # # # # # # # # # # # # # #  # # # # #  # # # # # # Y# B# #CMUSFOLl# D#ISPIC# EP#GTRUNC#ILL # 6# A# e# f# # # # #KEYS#KBNDEXC#FRMREF# NOTCHANGE#OVF# # LO#MRECFMT# NOTAVAIL#OCK# P# E # G # T# # # #PED&# _# d # # # #  #  # #  # R#ING# F #RAGE # # # # # $ # +# 9# :# ;# <# P# P# z# # # # # # # # # # #CODLAB# E# A# L# T# # # # D# # # #_VPS1 #PCLU#INVALD# R#CPYERR#EAM # # 2# V # f   # g  # }  #    #   # #  # # # # # #ING# # # #  # # # # #  # #   #  !!# ""# ### $$# %%#  &&#  ''#  ((#  ))# **# ++# ,,# --# ..# //#  00# 11# 22# 33#  44#  55#  66# 77# 88# " 99# " ::# # ;;# $ <<# &==# ,>># -??# -@@# 0AA# 3BB# 4CC# 5DD# 6EE# 7FF# 7GG# 9HH# :II# < JJ# >KK# ?LL# B MM# BNN# COO# CPP# EQQ# FRR# FSS# GTT# GUU# HVV# KWW# LXX# QYY# SZZ# `[[# a\\# f]]# f^^# j__# m``# paa# ubb# ycc# ydd# yee# yff# ~gg# hh# ii# jj# kk#  ll# mm# nn# oo# pp# qq# rr# ss# tt#  uu# vv#  ww# xx#  yy#  zz# {{#  ||# }}#  ~~#  # #  # # # # # # # # # # # # #  # # # # #  # # # # # # #  # # # # # # #  # #  # # # # # # # # # # # # # # # # # # # # # # #  # # # # # # # #  # #  #  #  # # # #  # # # # # # #  # # Ep$}$p$ STRINGSjp$ p$ p$TOOLONGp$RUNCp$S_INTp$ p$  p$LENERR p$ VL p$  p$  p$ NOTFOUNDp$WCBp$ONGLYwp$TERESCp$ p$NOMULTIp$OOLARGEp$ NGp$ p$ p$ p$ ONp$ RUp$ UPBADPARp$NOREMp$UCLEVp$ p$TUREp$  p$  !!p$  ""p$  ##p$ $$p$  %%p$ &&p$ &''p$ '((p$ ())p$ )**p$ .++p$ 2,,p$ 3--p$ 6..p$ <//p$ E00p$ O11p$ f22p$ h33p$ p 44p$ t 55p$ z66p$ }77p$ ~88p$ 99p$ ::p$ ;;p$ <<p$ ==p$ >>p$ ??p$ @@p$ AAp$ BBp$ CCp$  DDp$ EEp$  FFp$ GGp$ HHp$ IIp$ JJp$ KKp$ LLp$ MMp$ NNp$ OOp$ PPp$  QQp$ RRp$  SSp$ TTp$  UUp$  D VVp$ $WWp$ ?XXp$  YYp$  SZZp$ [[p$ 9\\p$ j ]]p$ j^^p$ y__p$ ``p$ aap$ _LEVELH bbp$_LEVELccp$ UBNOCOMPddp$X_Cleep$YLEffp$ UB^ggp$ hhp$ABORTiip$LREXIjjp$CLASSkkp$OMMANDllp$  mmp$ FUNCTIONnnp$INDEXoop$TERRppp$JECT qqp$KEYrrp$ ssp$ Sttp$LOCKSuup$  vvp$MITnwwp$ xxp$TEDyyp$ODEzzp$ {{p$OPTIONS||p$RDINATE}}p$ ~~p$ p$ p$ p$PROCESSp$ p$ 1p$ 2p$ Sp$ W p$ ip$ r p$  p$  p$  p$ p$ p$ p$ p$  ESp$REJECTp$ NGp$ 1p$ 2p$ 3p$ 4p$ 5p$ 6p$ 7p$OUTINE*p$SCHERRp$RIPTp$ p$ p$ p$ p$ p$ p$ p$ IONp$  Sp$EQUENTcp$ dp$ ep$RVERp$ p$ p$ p$ p$ p$HELL,p$ /p$PNERRp$TITUTEp$ IONp$RERRp$INGp$SERRp$YSTEMp$ 6p$ cp$ dp$ p$ p$ p$ p$ p$ p$TRACEDp$TION>p$ Cp$ T p$ X p$  p$  p$YPE p$ p$ CCDUPACEp$EEDINGp$ SSU p$ p$ p$ p$ p$FULp$ p$  p$ ,p$ -p$ p$ p$ p$ p$  LY p$ p$ p$ p$ p$ Dp$ xp$ yp$ p$ p$ p$ p$ p$ p$ p$ p$IVEp$ Hp$ (p$ Np$ Op$ Vp$ jp$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$   p$   p$   p$   p$   p$ FFICIENTp$ITABLEp$ p$  p$MMARY0 p$ Hp$  p$  p$ p$ p$ p$ p$  p$ p$ p$ 1p$ 2p$ 3p$ P  p$DEVERR!!p$ERCEDE!""p$ ##p$FLUOUSn $$p$SEDE8%%p$ &&p$ ''p$ ((p$  D7))p$ S **p$ n++p$ r,,p$  --p$  ..p$ //p$ 00p$ 11p$ 22p$VISOR33p$PLIED44p$ 55p$ 66p$ 77p$ 88p$ 99p$ ::p$ ;;p$ <<p$ ==p$ >>p$ 2??p$ 7@@p$ 8AAp$ HBBp$ UCCp$  DDp$ EEp$ FFp$ GGp$ HHp$ IIp$ JJp$ KKp$ YPLLp$ tMMp$ NNp$  OOp$ PPp$ QQp$ RRp$ SSp$ TTp$ UUp$ORT VVp$ WWp$ 'XXp$ (YYp$ -ZZp$ 8[[p$ :\\p$ @]]p$ s ^^p$ s __p$ w``p$  aap$  bbp$ ccp$  ddp$ eep$ ffp$  ggp$ hhp$  iip$  jjp$ kkp$ llp$  mmp$  nnp$ oop$ EDppp$ qqp$ rrp$ ssp$ ttp$ uup$ vvp$  wwp$ " xxp$ # yyp$ &zzp$ & {{p$ ,||p$ .}}p$ /~~p$ / p$ 0p$ 1p$ 1p$ 4p$ 4p$ <p$ @ p$ Jp$ Up$ Up$ Wp$ [p$ \p$ dp$ ep$ gp$ hp$ hp$ lp$ t p$ p$ p$ p$ p$ p$ p$ p$  p$ p$ p$ p$ p$ p$ p$ p$  p$  p$ p$  p$  p$  p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ Sp$ p$RESSED p$ \p$ op$ ION p$RESSIONp$SPECTp$ p$ p$ p$ EDp$ Sp$ NDp$ p$ p$ EDPp$ p$ p$ p$VRVERMISMATCHp$WAPK p$ Np$ Sp$ ip$ tp$  p$ p$  p$  p$  p$ p$ p$AGINSp$PEDPp$WSLEp$ITCH p$ &p$ Wp$ p$ p$INGp$ IGNALPHAp$VAXp$ REFUNSATvp$ YITSTERRp$ LOGICALSp$ MABNORMALp$ Rp$BIONTp$ p$ p$ p$ p$ OLp$ p$ p$ p$ p$ p$ p$ p$ p$ p$  p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$  p$ p$ p$ #p$ % p$ & p$ ' p$ '  p$ )  p$ *  p$ ,  p$ .  p$ 0p$ 0p$ 1p$ 2p$ 3p$ 4p$ 5p$ 5 p$ 6p$ 8p$ 9p$ 9p$ ;p$ <p$ =p$ >p$ ?p$ Cp$ D  p$ D!!p$ G""p$ L##p$ N$$p$ P%%p$ R&&p$ S''p$ T((p$ U))p$ X**p$ Z++p$ \,,p$ ^--p$ b..p$ c//p$ c00p$ d11p$ e22p$ g33p$ h44p$ j55p$ j66p$ k77p$ m88p$ n99p$ n::p$ o;;p$ p<<p$ q==p$ r>>p$ s??p$ u@@p$ vAAp$ wBBp$ wCCp$ xDDp$ |EEp$ | FFp$ |GGp$ }HHp$ }IIp$ JJp$ KKp$ LLp$ MMp$ NNp$ OOp$ PPp$ QQp$ RRp$ SSp$ TTp$ UUp$ VVp$ WWp$ XXp$ YYp$ ZZp$ [[p$  \\p$ ]]p$ ^^p$ __p$ ``p$ aap$ bbp$ ccp$ ddp$ eep$ ffp$ ggp$ hhp$ iip$ jjp$ kkp$ llp$ mmp$ nnp$ oop$ ppp$ qqp$ rrp$ ssp$ ttp$ uup$ vvp$  wwp$ xxp$ yyp$ zzp$ {{p$ ||p$ }}p$ ~~p$ p$  p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ ICp$ p$ S p$ 9p$ :p$ L p$ }p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$_VECTORp$ Gp$ p$ p$ p$ p$CREPRCp$DCLEXTRp$ p$EFINMOp$ p$ Lp$ p$ p$ETEp$HASLNKGkp$INSERTp$ HR)p$LINKp$ <p$ p$ p$ p$ p$ NGp$MULBNDp$NAMLNGp$OTABSp$ p$FLWp$ OUp$SETp$OUTPHASp$ p$RNGp$ VFp$REPLACEp$TBLFULp$OOLNGp$ p$ p$ONGp$RUNCp$ VAp$BNORMALp$LNZROp$RDEFp$ p$ECMISp$ Np$ CH p$ p$ RONIZATION+p$ pp$ p$ p$ p$  ED#p$ p$ OUS p$_FAIL p$ERR p$ONYMp$ PWDSYNCH#p$TAXp$ p$  p$  p$  p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$  p$ p$ p$ p$ p$ "p$ #p$ $ p$ % p$ ,p$ ;p$ Gp$ Up$ [  p$ [   p$ \  p$ ]  p$ a   p$ qp$ rp$ rp$ rp$ sp$ sp$ tp$ zp$ p$ p$  p$  p$ p$ p$ p$  p$ p$ p$    p$  !!p$ ""p$ ##p$ $$p$ %%p$ &&p$ ''p$ ((p$ ))p$ **p$ ++p$ ,,p$ --p$ ..p$ //p$ 00p$ 11p$  22p$  33p$ 44p$ 55p$ERR66p$  OR77p$ S88p$ 99p$ ::p$ ;;p$ ,<<p$ 7==p$ ?>>p$ T??p$ X@@p$ YAAp$ ZBBp$ f CCp$ x DDp$ zEEp$ {FFp$ GGp$ HHp$ IIp$ JJp$ $xKKp$ BASE_IMAGELLp$ MMp$COMMAND NNp$ TOOp$ PPp$DELPRCHQQp$VICE_RRp$ISK_SSp$ EXPREG_64|TTp$ }UUp$FAOBVVp$GETJPIJ WWp$ K XXp$SYIMYYp$HELPZZp$INPUT[[p$ \\p$  ]]p$  ^^p$OUTPUT__p$ PROTECTED_``p$ aap$ REGISTRYbbp$STARTUPccp$YSTEMRddp$ Seep$ Tffp$ jggp$ khhp$TIMEZONE_RULEOiip$UPDATEjjp$ADJWSLkkp$BOOTllp$ mmp$ nnp$ oop$ ppp$ qqp$ rrp$ ssp$ ttp$ uup$  vvp$ !wwp$ "xxp$ #yyp$ $zzp$ %{{p$ &||p$ '}}p$ (~~p$ )p$ *p$ +p$ ,p$ -p$ .p$ /p$ 0p$ 1p$ 2p$ 3p$ 4p$ 5p$ 6p$ 7p$ 8p$ 9p$ :p$ Kp$ p$DEV;p$ IR<p$UMP2p$ERR=p$ OR>p$ ?p$  PC@p$FAILAp$OERRBp$GBLp$ ENp$  p$ p$HEADERCp$ IDDp$NITEp$ Fp$ Gp$ Hp$ Ip$ Jp$ Kp$ Lp$ Mp$ Np$ Op$ Pp$ Qp$ Rp$ Sp$ Tp$ Up$ Vp$ Wp$ Xp$ Yp$ Zp$ [p$ gp$JNLFULL\p$NAC]p$LCKp$ Vp$ Wp$ Xp$OAD^p$ G_p$ STX p$MANp$ Dp$ GR`p$SG2ap$NAMp$ `p$ bp$OTUPDcp$PRVp$ Wp$ Xp$ `p$ ap$ p$ p$WDMODdp$TMOep$SRVERRfp$TEMp$ p$ p$ p$ p$ p$ p$ p$  p$  p$  p$ p$ p$ p$ p$ p$  p$ p$ p$ p$ !p$ "p$ "p$ #p$ $p$ %p$ 'p$ (p$ (p$ ( p$ )p$ *p$ *p$ -p$ /p$ 1p$ 2p$ 4p$ 4p$ 7p$ 7p$ 9 p$ 9p$ 9p$ ;p$ ;p$ <p$ <p$ =p$ >p$ ?p$ @p$ @  p$ A   p$ A  p$ C   p$ C  p$ Dp$ F p$ Gp$ Kp$ Kp$ Lp$ Mp$ Op$ Pp$ Qp$ Rp$ Sp$ Tp$ Up$ Vp$ Vp$ Wp$ Xp$ Y  p$ \ !!p$ ]""p$ ^##p$ ^$$p$ `%%p$ a &&p$ c''p$ d((p$ d))p$ d**p$ e++p$ e,,p$ e--p$ f..p$ f//p$ g00p$ h11p$ i22p$ i33p$ j 44p$ j55p$ k66p$ k77p$ l88p$ l99p$ l::p$ m;;p$ n<<p$ o==p$ o>>p$ q??p$ s@@p$ tAAp$ tBBp$ uCCp$ vDDp$ vEEp$ wFFp$ wGGp$ xHHp$ zIIp$ }JJp$ ~KKp$ ~LLp$ MMp$ NNp$  OOp$  PPp$  QQp$ RRp$  SSp$ TTp$  UUp$ VVp$ WWp$ XXp$ YYp$ ZZp$ [[p$ \\p$ ]]p$ ^^p$ __p$ ``p$ aap$ bbp$ ccp$ ddp$ eep$ ffp$ ggp$ hhp$ iip$ jjp$  kkp$ llp$ mmp$ nnp$ oop$ ppp$ qqp$ rrp$ ssp$ ttp$ uup$ vvp$ wwp$ xxp$ yyp$ zzp$ {{p$ ||p$ }}p$ ~~p$ p$  p$ p$ p$ p$  p$ p$  p$ p$ p$ p$ p$ p$ p$ p$ p$  p$ p$ p$ p$ p$  p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ Sp$WIDE( p$ _PRIMITIVESp$RMERRgp$UAF6p$ \ p$ p$VERCHKhp$DIFip$ jp$ kp$ lp$ZTOOBIGmp$TABp$EXISTnp$ID_MISop$ LEp$  p$ p$ p$ p$ p$  p$  p$ )p$ *p$ +p$ ,p$ .p$ 3p$ 4p$ 8 p$ 9 p$ =p$ Cp$ G p$ Lp$ Mp$ Op$ Vp$ Wp$ Wp$ Yp$ Zp$ Zp$ [p$ \p$ ] p$ ^p$ _ p$ ` p$ e p$ ip$ jp$ mp$ np$ op$ pp$ qp$ qp$ rp$ sp$ s p$ tp$ v p$ vp$ wp$ xp$ |p$  p$ p$ p$ p$ p$ p$ p$ p$ p$ p$  p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$  p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$   p$   p$   p$   p$   p$FULLpp$ Sp$ p$ p$ k p$ p$ p$ p$ p$ p$ p$  p$ p$NOTFNDqp$ Sp$ 7 p$UPERrp$ Gp$ L  p$ }!!p$ ""p$ ##p$ S$$p$ %%p$ KE&&p$ N?''p$ d((p$ ))p$ **p$INGQ++p$ LK,,p$MPERs--p$ EDs..p$ //p$ PE00p$ 11p$ D 22p$ E 33p$ G 44p$ O 55p$ d66p$ r77p$ v88p$ x99p$ }::p$ ;;p$ <<p$ ==p$ >>p$  ??p$  @@p$  AAp$ BBp$  CCp$ DDp$ EEp$ FFp$ ALLODIFFFtGGp$ ZERFuHHp$CLASSvIIp$FULLwJJp$POSLOSTxKKp$ _ALLOCLASStLLp$ uMMp$ RyNNp$GET OOp$  PPp$ QQp$ RRp$ SSp$ TTp$ -UUp$ OVVp$ XWWp$ YXXp$ ZYYp$ [ZZp$ \[[p$ `\\p$ h]]p$ h^^p$ z__p$ {``p$ }aap$ bbp$ ccp$ ddp$ eep$ ffp$ ggp$ hhp$ iip$ jjp$ kkp$ llp$ mmp$ nnp$ _GOTO_UNWINDzoop$UNWIND{ppp$ SK qqp$ERROR|rrp$ ING_ERROR|ssp$BIT}ttp$KBUG~uup$L2SMALLvvp$ ELEPHONE wwp$ 6xxp$MPLATEtyyp$ zzp$ {{p$ DEV||p$ORARY&}}p$ *~~p$ -p$ Ip$ L p$ rp$ RMp$DSBLp$ENABp$FAILp$IMMp$ p$NAL p$ p$  p$  p$  p$ p$  p$ p$ p$ p$ p$ !p$ $p$ %p$ 'p$ (p$ )p$ *p$ +p$ +p$ /p$ 1p$ 5p$ 9 p$ 9p$ @p$ Kp$ Kp$ Lp$ Tp$ gp$ jp$ op$ qp$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$  p$ p$  p$ p$ p$ p$  SE$C$$ TERMINALS$ p$ p$TOOLONGp$RUNCp$S_INTp$ p$  p$LENERR p$ VL p$  p$  p$ NOTFOUNDp$WCBp$ONGLYwp$TERESCp$ p$NOMULTIp$OOLARGEp$ NGp$ p$ p$ p$ ONp$ RUp$ UPBADPARp$NOREMp$UCLEVp$ p$TUREp$  p$  !!p$  ""p$  ##p$ $$p$  %%p$ &&p$ &''p$ '((p$ ())p$ )**p$ .++p$ 2,,p$ 3--p$ 6..p$ <//p$ E00p$ O11p$ f22p$ h33p$ p 44p$ t 55p$ z66p$ }77p$ ~88p$ 99p$ ::p$ ;;p$ <<p$ ==p$ >>p$ ??p$ @@p$ AAp$ BBp$ CCp$  DDp$ EEp$  FFp$ GGp$ HHp$ IIp$ JJp$ KKp$ LLp$ MMp$ NNp$ OOp$ PPp$  QQp$ RRp$  SSp$ TTp$  UUp$  D VVp$ $WWp$ ?XXp$  YYp$  SZZp$ [[p$ 9\\p$ j ]]p$ j^^p$ y__p$ ``p$ aap$ _LEVELH bbp$_LEVELccp$ UBNOCOMPddp$X_Cleep$YLEffp$ UB^ggp$ hhp$ABORTiip$LREXIjjp$CLASSkkp$OMMANDllp$  mmp$ FUNCTIONnnp$INDEXoop$TERRppp$JECT qqp$KEYrrp$ ssp$ Sttp$LOCKSuup$  vvp$MITnwwp$ xxp$TEDyyp$ODEzzp$ {{p$OPTIONS||p$RDINATE}}p$ ~~p$ p$ p$ p$PROCESSp$ p$ 1p$ 2p$ Sp$ W p$ ip$ r p$  p$  p$  p$ p$ p$ p$ p$  ESp$REJECTp$ NGp$ 1p$ 2p$ 3p$ 4p$ 5p$ 6p$ 7p$OUTINE*p$SCHERRp$RIPTp$ p$ p$ p$ p$ p$ p$ p$ IONp$  Sp$EQUENTcp$ dp$ ep$RVERp$ p$ p$ p$ p$ p$HELL,p$ /p$PNERRp$TITUTEp$ IONp$RERRp$INGp$SERRp$YSTEMp$ 6p$ cp$ dp$ p$ p$ p$ p$ p$ p$TRACEDp$TION>p$ Cp$ T p$ X p$  p$  p$YPE p$ p$ CCDUPACEp$EEDINGp$ SSU p$ p$ p$ p$ p$FULp$ p$  p$ ,p$ -p$ p$ p$ p$ p$  LY p$ p$ p$ p$ p$ Dp$ xp$ yp$ p$ p$ p$ p$ p$ p$ p$ p$IVEp$ Hp$ (p$ Np$ Op$ Vp$ jp$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$   p$   p$   p$   p$   p$ FFICIENTp$ITABLEp$ p$  p$MMARY0 p$ Hp$  p$  p$ p$ p$ p$ p$  p$ p$ p$ 1p$ 2p$ 3p$ P  p$DEVERR!!p$ERCEDE!""p$ ##p$FLUOUSn $$p$SEDE8%%p$ &&p$ ''p$ ((p$  D7))p$ S **p$ n++p$ r,,p$  --p$  ..p$ //p$ 00p$ 11p$ 22p$VISOR33p$PLIED44p$ 55p$ 66p$ 77p$ 88p$ 99p$ ::p$ ;;p$ <<p$ ==p$ >>p$ 2??p$ 7@@p$ 8AAp$ HBBp$ UCCp$  DDp$ EEp$ FFp$ GGp$ HHp$ IIp$ JJp$ KKp$ YPLLp$ tMMp$ NNp$  OOp$ PPp$ QQp$ RRp$ SSp$ TTp$ UUp$ORT VVp$ WWp$ 'XXp$ (YYp$ -ZZp$ 8[[p$ :\\p$ @]]p$ s ^^p$ s __p$ w``p$  aap$  bbp$ ccp$  ddp$ eep$ ffp$  ggp$ hhp$  iip$  jjp$ kkp$ llp$  mmp$  nnp$ oop$ EDppp$ qqp$ rrp$ ssp$ ttp$ uup$ vvp$  wwp$ " xxp$ # yyp$ &zzp$ & {{p$ ,||p$ .}}p$ /~~p$ / p$ 0p$ 1p$ 1p$ 4p$ 4p$ <p$ @ p$ Jp$ Up$ Up$ Wp$ [p$ \p$ dp$ ep$ gp$ hp$ hp$ lp$ t p$ p$ p$ p$ p$ p$ p$ p$  p$ p$ p$ p$ p$ p$ p$ p$  p$  p$ p$  p$  p$  p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ Sp$ p$RESSED p$ \p$ op$ ION p$RESSIONp$SPECTp$ p$ p$ p$ EDp$ Sp$ NDp$ p$ p$ EDPp$ p$ p$ p$VRVERMISMATCHp$WAPK p$ Np$ Sp$ ip$ tp$  p$ p$  p$  p$  p$ p$ p$AGINSp$PEDPp$WSLEp$ITCH p$ &p$ Wp$ p$ p$INGp$ IGNALPHAp$VAXp$ REFUNSATvp$ YITSTERRp$ LOGICALSp$ MABNORMALp$ Rp$BIONTp$ p$ p$ p$ p$ OLp$ p$ p$ p$ p$ p$ p$ p$ p$ p$  p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$  p$ p$ p$ #p$ % p$ & p$ ' p$ '  p$ )  p$ *  p$ ,  p$ .  p$ 0p$ 0p$ 1p$ 2p$ 3p$ 4p$ 5p$ 5 p$ 6p$ 8p$ 9p$ 9p$ ;p$ <p$ =p$ >p$ ?p$ Cp$ D  p$ D!!p$ G""p$ L##p$ N$$p$ P%%p$ R&&p$ S''p$ T((p$ U))p$ X**p$ Z++p$ \,,p$ ^--p$ b..p$ c//p$ c00p$ d11p$ e22p$ g33p$ h44p$ j55p$ j66p$ k77p$ m88p$ n99p$ n::p$ o;;p$ p<<p$ q==p$ r>>p$ s??p$ u@@p$ vAAp$ wBBp$ wCCp$ xDDp$ |EEp$ | FFp$ |GGp$ }HHp$ }IIp$ JJp$ KKp$ LLp$ MMp$ NNp$ OOp$ PPp$ QQp$ RRp$ SSp$ TTp$ UUp$ VVp$ WWp$ XXp$ YYp$ ZZp$ [[p$  \\p$ ]]p$ ^^p$ __p$ ``p$ aap$ bbp$ ccp$ ddp$ eep$ ffp$ ggp$ hhp$ iip$ jjp$ kkp$ llp$ mmp$ nnp$ oop$ ppp$ qqp$ rrp$ ssp$ ttp$ uup$ vvp$  wwp$ xxp$ yyp$ zzp$ {{p$ ||p$ }}p$ ~~p$ p$  p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ ICp$ p$ S p$ 9p$ :p$ L p$ }p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$_VECTORp$ Gp$ p$ p$ p$ p$CREPRCp$DCLEXTRp$ p$EFINMOp$ p$ Lp$ p$ p$ETEp$HASLNKGkp$INSERTp$ HR)p$LINKp$ <p$ p$ p$ p$ p$ NGp$MULBNDp$NAMLNGp$OTABSp$ p$FLWp$ OUp$SETp$OUTPHASp$ p$RNGp$ VFp$REPLACEp$TBLFULp$OOLNGp$ p$ p$ONGp$RUNCp$ VAp$BNORMALp$LNZROp$RDEFp$ p$ECMISp$ Np$ CH p$ p$ RONIZATION+p$ pp$ p$ p$ p$  ED#p$ p$ OUS p$_FAIL p$ERR p$ONYMp$ PWDSYNCH#p$TAXp$ p$  p$  p$  p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$  p$ p$ p$ p$ p$ "p$ #p$ $ p$ % p$ ,p$ ;p$ Gp$ Up$ [  p$ [   p$ \  p$ ]  p$ a   p$ qp$ rp$ rp$ rp$ sp$ sp$ tp$ zp$ p$ p$  p$  p$ p$ p$ p$  p$ p$ p$    p$  !!p$ ""p$ ##p$ $$p$ %%p$ &&p$ ''p$ ((p$ ))p$ **p$ ++p$ ,,p$ --p$ ..p$ //p$ 00p$ 11p$  22p$  33p$ 44p$ 55p$ERR66p$  OR77p$ S88p$ 99p$ ::p$ ;;p$ ,<<p$ 7==p$ ?>>p$ T??p$ X@@p$ YAAp$ ZBBp$ f CCp$ x DDp$ zEEp$ {FFp$ GGp$ HHp$ IIp$ JJp$ $xKKp$ BASE_IMAGELLp$ MMp$COMMAND NNp$ TOOp$ PPp$DELPRCHQQp$VICE_RRp$ISK_SSp$ EXPREG_64|TTp$ }UUp$FAOBVVp$GETJPIJ WWp$ K XXp$SYIMYYp$HELPZZp$INPUT[[p$ \\p$  ]]p$  ^^p$OUTPUT__p$ PROTECTED_``p$ aap$ REGISTRYbbp$STARTUPccp$YSTEMRddp$ Seep$ Tffp$ jggp$ khhp$TIMEZONE_RULEOiip$UPDATEjjp$ADJWSLkkp$BOOTllp$ mmp$ nnp$ oop$ ppp$ qqp$ rrp$ ssp$ ttp$ uup$  vvp$ !wwp$ "xxp$ #yyp$ $zzp$ %{{p$ &||p$ '}}p$ (~~p$ )p$ *p$ +p$ ,p$ -p$ .p$ /p$ 0p$ 1p$ 2p$ 3p$ 4p$ 5p$ 6p$ 7p$ 8p$ 9p$ :p$ Kp$ p$DEV;p$ IR<p$UMP2p$ERR=p$ OR>p$ ?p$  PC@p$FAILAp$OERRBp$GBLp$ ENp$  p$ p$HEADERCp$ IDDp$NITEp$ Fp$ Gp$ Hp$ Ip$ Jp$ Kp$ Lp$ Mp$ Np$ Op$ Pp$ Qp$ Rp$ Sp$ Tp$ Up$ Vp$ Wp$ Xp$ Yp$ Zp$ [p$ gp$JNLFULL\p$NAC]p$LCKp$ Vp$ Wp$ Xp$OAD^p$ G_p$ STX p$MANp$ Dp$ GR`p$SG2ap$NAMp$ `p$ bp$OTUPDcp$PRVp$ Wp$ Xp$ `p$ ap$ p$ p$WDMODdp$TMOep$SRVERRfp$TEMp$ p$ p$ p$ p$ p$ p$ p$  p$  p$  p$ p$ p$ p$ p$ p$  p$ p$ p$ p$ !p$ "p$ "p$ #p$ $p$ %p$ 'p$ (p$ (p$ ( p$ )p$ *p$ *p$ -p$ /p$ 1p$ 2p$ 4p$ 4p$ 7p$ 7p$ 9 p$ 9p$ 9p$ ;p$ ;p$ <p$ <p$ =p$ >p$ ?p$ @p$ @  p$ A   p$ A  p$ C   p$ C  p$ Dp$ F p$ Gp$ Kp$ Kp$ Lp$ Mp$ Op$ Pp$ Qp$ Rp$ Sp$ Tp$ Up$ Vp$ Vp$ Wp$ Xp$ Y  p$ \ !!p$ ]""p$ ^##p$ ^$$p$ `%%p$ a &&p$ c''p$ d((p$ d))p$ d**p$ e++p$ e,,p$ e--p$ f..p$ f//p$ g00p$ h11p$ i22p$ i33p$ j 44p$ j55p$ k66p$ k77p$ l88p$ l99p$ l::p$ m;;p$ n<<p$ o==p$ o>>p$ q??p$ s@@p$ tAAp$ tBBp$ uCCp$ vDDp$ vEEp$ wFFp$ wGGp$ xHHp$ zIIp$ }JJp$ ~KKp$ ~LLp$ MMp$ NNp$  OOp$  PPp$  QQp$ RRp$  SSp$ TTp$  UUp$ VVp$ WWp$ XXp$ YYp$ ZZp$ [[p$ \\p$ ]]p$ ^^p$ __p$ ``p$ aap$ bbp$ ccp$ ddp$ eep$ ffp$ ggp$ hhp$ iip$ jjp$  kkp$ llp$ mmp$ nnp$ oop$ ppp$ qqp$ rrp$ ssp$ ttp$ uup$ vvp$ wwp$ xxp$ yyp$ zzp$ {{p$ ||p$ }}p$ ~~p$ p$  p$ p$ p$ p$  p$ p$  p$ p$ p$ p$ p$ p$ p$ p$ p$  p$ p$ p$ p$ p$  p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ Sp$WIDE( p$ _PRIMITIVESp$RMERRgp$UAF6p$ \ p$ p$VERCHKhp$DIFip$ jp$ kp$ lp$ZTOOBIGmp$TABp$EXISTnp$ID_MISop$ LEp$  p$ p$ p$ p$ p$  p$  p$ )p$ *p$ +p$ ,p$ .p$ 3p$ 4p$ 8 p$ 9 p$ =p$ Cp$ G p$ Lp$ Mp$ Op$ Vp$ Wp$ Wp$ Yp$ Zp$ Zp$ [p$ \p$ ] p$ ^p$ _ p$ ` p$ e p$ ip$ jp$ mp$ np$ op$ pp$ qp$ qp$ rp$ sp$ s p$ tp$ v p$ vp$ wp$ xp$ |p$  p$ p$ p$ p$ p$ p$ p$ p$ p$ p$  p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$  p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$   p$   p$   p$   p$   p$FULLpp$ Sp$ p$ p$ k p$ p$ p$ p$ p$ p$ p$  p$ p$NOTFNDqp$ Sp$ 7 p$UPERrp$ Gp$ L  p$ }!!p$ ""p$ ##p$ S$$p$ %%p$ KE&&p$ N?''p$ d((p$ ))p$ **p$INGQ++p$ LK,,p$MPERs--p$ EDs..p$ //p$ PE00p$ 11p$ D 22p$ E 33p$ G 44p$ O 55p$ d66p$ r77p$ v88p$ x99p$ }::p$ ;;p$ <<p$ ==p$ >>p$  ??p$  @@p$  AAp$ BBp$  CCp$ DDp$ EEp$ FFp$ ALLODIFFFtGGp$ ZERFuHHp$CLASSvIIp$FULLwJJp$POSLOSTxKKp$ _ALLOCLASStLLp$ uMMp$ RyNNp$GET OOp$  PPp$ QQp$ RRp$ SSp$ TTp$ -UUp$ OVVp$ XWWp$ YXXp$ ZYYp$ [ZZp$ \[[p$ `\\p$ h]]p$ h^^p$ z__p$ {``p$ }aap$ bbp$ ccp$ ddp$ eep$ ffp$ ggp$ hhp$ iip$ jjp$ kkp$ llp$ mmp$ nnp$ _GOTO_UNWINDzoop$UNWIND{ppp$ SK qqp$ERROR|rrp$ ING_ERROR|ssp$BIT}ttp$KBUG~uup$L2SMALLvvp$ ELEPHONE wwp$ 6xxp$MPLATEtyyp$ zzp$ {{p$ DEV||p$ORARY&}}p$ *~~p$ -p$ Ip$ L p$ rp$ RMp$DSBLp$ENABp$FAILp$IMMp$ p$NAL p$ p$  p$  p$  p$ p$  p$ p$ p$ p$ p$ !p$ $p$ %p$ 'p$ (p$ )p$ *p$ +p$ +p$ /p$ 1p$ 5p$ 9 p$ 9p$ @p$ Kp$ Kp$ Lp$ Tp$ gp$ jp$ op$ qp$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$ p$  p$ p$  p$ p$ p$ p$  SE$}-%$ TERMINATE $ L$ w$ $ $ $  $   $   $  $  D $  $  $ ,$ -$ /$ 1$ 2$ 2$ U$ d $ {$ ~$ $ $ $ $ $ $ $  $ !!$ ""$ ##$ $$$ INGd %%$ w&&$  ON''$  (($ a))$ **$ ++$ ,,$  ORZ --$  ..$ //$REQ 00$SETUP%11$TABLE 22$UNSUPP&33$OUT44$ ST55$ 66$  77$ 688$ 799$ 8::$ r ;;$ }<<$  ==$ >>$ ??$ @@$ AA$ BB$  CC$ DD$ EE$  FF$ GG$ HH$  II$ JJ$ KK$FAILLL$ING1 MM$ <NN$ =OO$ >PP$ ?QQ$ @RR$ ASS$ BTT$ CUU$ DVV$ EWW$ Q XX$ R YY$ S ZZ$ T [[$ U \\$ V ]]$ W ^^$ X __$ f``$ ~aa$  bb$  cc$  dd$  ee$ ff$  gg$  hh$  ii$  jj$ kk$ ll$  mm$ nn$ oo$ XT pp$  qq$ rr$ ss$ 1 tt$ @uu$ Hvv$ Kww$ M xx$ Yyy$ Zzz$ [{{$ \||$ ]}}$ `~~$ `$ d$ d$ e$ f$ g$ h$ i$ j$ j$ k$ s$ u$ x$ y$ y$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $  $  $ $ $ $ $ $ $ $ $ $ $  $ $ $ $ $ $ D$ $ FE$RSYS$HAN$ $  $ $ $  $ $ $ $ $  $ !$ '$ *$ 0 $ 1$ 1$ 3$ 4$ 6$ 7$ 9$ D$ E $ F$ M$ N$ Q$ ^$ `$ a$ a $ e$ h$ m$ m$ s$ z$ |$ |$ |$ }$ }$ $ $ $ $ $ $ $ $ $ $  $ $ $ $ $ $ $ $ $  $ $ $ $ $ $ $ $ $ $ $ T$  $  $ $ $ $ !$ )$ .$ 9  $ A   $ F  $ M  $ U  $ f$ m$ x$ {$ }$ $ $ $ $ $ $ $ $ $ $  $ E$ $   $ !!$ ""$ ##$ $$$ %%$ &&$ ''$ (($ ))$ **$  ++$  ,,$  --$  ..$  //$  00$  11$  22$ 33$ 44$ 55$ 66$ 77$ 88$ 99$ ::$ ;;$ <<$ ==$ >>$ ??$ @@$ AA$ BB$ CC$ DD$ EE$ FF$ GG$ HH$ II$ JJ$  KK$ #LL$ $MM$ $NN$ %OO$ %PP$ %QQ$ &RR$ 'SS$ 'TT$ (UU$ )VV$ *WW$ +XX$ +YY$ - ZZ$ .[[$ / \\$ 0 ]]$ 1^^$ 1 __$ 1``$ 2 aa$ 2bb$ 5cc$ 5dd$ 5ee$ 5ff$ 6gg$ 7hh$ 7ii$ 8jj$ 8 kk$ 8ll$ 8mm$ 9nn$ :oo$ :pp$ : qq$ ;rr$ <ss$ <tt$ =uu$ =vv$ =ww$ =xx$ >yy$ @ zz$ @{{$ A ||$ A}}$ C~~$ D$ D$ F$ G$ H$ H$ H$ I $ I$ I$ I$ J$ J$ L $ M$ N$ N$ P$ S$ T$ V$ W$ W $ W$ X$ Y $ Y$ Z$ \$ ]$ _$ `$ `$ a$ a$ b$ b$ d$ e$ e $ f$ g$ h$ h$ i$ i $ j$ k $ k$ m$ m $ m$ n $ n $ p$ p$ q$ q$ q$ r$ s$ t$ u $ u$ u$ v$ v$ w$ x$ x$ y$ y$ {$ {$ |$ |$ ~$ ~$ $ $ $ $ $ $ $ $  $ $ $ $ $ $ $ $ $ $ $ $ $ $  $ $ $ $  $ $ $  $ $ $ $ $ $ $ $ $ $ $  $ $ $ $ $  $ $  $ $ $ $ $ $ $ $ $ $ $ $  $   $   $   $    $   $ $ $ $ $ $ $ $  $ $ $ $ $ $ $ $ $ $ $   $ !!$ ""$ ##$ $$$ %%$ &&$ ''$ (($ ))$ **$ ++$  ,,$ --$ ..$ //$ 00$ 11$ 22$  33$ 44$ 55$ 66$ 77$  88$ 99$ ::$ ;;$  <<$ ==$ >>$ ??$ @@$ AA$ BB$ CC$ DD$ EE$ FF$ GG$ HH$ II$ JJ$ KK$  LL$ MM$ NN$ OO$ IRhPP$ MQQ$ NRR$ GSS$ zTT$ UU$ VV$ REWW$ @XX$ QYY$ RZZ$ {[[$ | \\$ } ]]$ ~ ^^$  __$ ``$ aa$ bb$ cc$ dd$FOREee$ ff$INKSgg$ RDhh$PARTYii$ Sjj$ kk$ ll$ mm$ nn$  oo$ pp$ qq$  rr$  ss$  tt$  uu$  vv$  ww$ xx$  yy$  zz$  {{$ ||$ }}$ ~~$ $ $ )$ * $ 2$ 3$ 3$ 4$ 5 $ 7 $ 9$ <$ =$ > $ ?$ ? $ @$ @ $ B$ B$ C$ E$ L$ M$ M$ O $ P$ Q$ Q$ Q$ R$ R $ R$ U$ V$ W$ W$ Z$ [$ \$ _$ _$ `$ `$ `$ a$ b$ d$ d$ f$ f$ f$ g$ j$ j$ j$ k$ p$ q$ t$ t$ u$ w$ y$ {$ $ $ $ $ $  $ $ $ $ $ $ $ $ $ $ $ $ $ $  $  $  $  $ $ $ $ $ $ $ $ $ $ $ $ $ $  $ $ $ $ $ $  $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $  $  $OSE8$ U $UGH$RDCRERR$ERR$EAD$ <  $ =  $ A  $ A  $ D   $ $ $ $ERRORA$ E $OUGH$  $ $ $ $ $ $ ID$ E $ m$ $ ME $  $   $ !!$ ""$ ##$ $$$ %%$ &&$ ''$ !(($ "))$ , **$ 0++$ 2 ,,$ 3--$ 8..$ 8//$ >00$ ?11$ @22$ E33$ F44$ G55$ K66$ L 77$ O88$ Q99$ _::$ _;;$ g<<$ o==$ p>>$ t??$ y @@$ z AA$  BB$ CC$  DD$ EE$ FF$ GG$ HH$ II$ JJ$  KK$ LL$ MM$ NN$ OO$ PP$ QQ$ RR$  SS$  TT$ UU$  VV$ WW$ XX$ YY$  ZZ$ [[$  \\$  ]]$ ^^$ __$ ``$ aa$ bb$ cc$  dd$ D ee$  ff$ Bgg$ Uhh$ pii$ jj$ kk$ ll$ mm$ nn$ oo$ pp$ qq$OUTprr$_OUTss$NOTSETtt$OUTuu$ 5vv$ 9ww$ Bxx$ eyy$ wzz$ ~{{$ ||$ }}$ ~~$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ R$ !$ 3$ B $ C $ j $ $ $ $SETUP'$ S $TAMP$ORDSCB$UPDSCB$PCUFLOW$ R$LNG$ THq$NYI$TLEv$ $TRUNC$KNOVF$LKINUSE$ V7$ MF$ O$EXP$ P,$ $  $MBXX$ s$ $ R$ S$ CP$ $ $ $ $LDERR$NOTLD$ $SERV$_LOAD$ T$ V$ NS$ODAY$ISCON$KEN$ $ $ NEa$ O$ $ $ $ $ $  $ $ $ $ $ $ $  $ $ $ $  $ $ $  $ !$ !$ "$ " $ %$ ( $ )$ *$ , $ 0$ 2$ 2$ 5$ 6$ 9$ 9$ <$ C$ E$ F$ I$ K $ L$ M$ M$ O$ W$ Z $ [ $ \ $ \$ \$ ] $ _$ _$ b$ d$ d$ g$ h$ i $ i$ k$ k$ l$ l$ l  $ o  $ q  $ r  $ u  $ v$ $ $ $ $ $  $ $ $ $ $ $ $ $ $ $ $ $   $ !!$ ""$  ##$  $$$ %%$  &&$ ''$ (($ ))$ **$ ++$ ,,$ --$  ..$ //$ 00$ 11$ 22$ 33$  44$ 55$ 66$ 77$ 88$  99$ ::$ ;;$ <<$ ==$ >>$ ??$ @@$ AA$ BB$ CC$ DD$ EE$ FF$ GG$ HH$ II$ JJ$ KK$ LL$ MM$ NN$ OO$ PP$ QQ$ RR$ SS$ TT$ UU$ VV$ WW$ XX$ YY$ ZZ$ [[$ \\$ ]]$ ^^$ __$ ``$ aa$ bb$ cc$ dd$ ee$ ff$ gg$ hh$ ii$ jj$ kk$ ll$ mm$ nn$  oo$  pp$  qq$ rr$ ss$ tt$ uu$ vv$ ww$ xx$ yy$ zz$ {{$ ||$ }}$ ~~$ $ $ $ $ $ $DEEP$FEW$CAS$LONGs$ $ $MANCLS$ IFM$NOD$PAS$ Y$ $AJL$ RGS$ $COL$ELTS$ RLBUF($LEV$ NAM$OPENKEY$PARAM$ IPCMD)$RECS$  DS$SUB$USERS$VER$NYARG$  S$ $DLM$ENDR$FIL$  ES$LIB$OPND$ $PSEC$ $UCH*$CLASS$DATA$INFO$ _MANY_ARGSr$ NY$ P$ $ $ LINETRUNC$OFDOC$RBS{$QUIT$TAL7$ O $ $ $ $_SKP$WDR$ PDISABLED$SFAOERR$INVBLK$TERM$UTCERR$ U $_SERVER$ QE{$ $RACE$ ~$ $ $ $BACK $ C $ G$ H$ $  $ $ $IGN $ $ NG$ $ILER$INGO$ NSACTION$ $ $ $ $ $ $ $ $  $ $  $  $ ( $ ?$ D$ K$ ^$ _$ j$ u $ $ $ $ $  $ $ $ $ $ $  $  $  $ $ $ $ $ $ $ $ $  $ $   $   $  S   $    $CALLER  $RIPTION $FER$ !$ "$ & $ '$ - $ =$ ?$ E$ O$ U$ c$ e $ z $ $ $  $   $ !!$ ""$ RED<##$  S$$$INSTR%%$ T@&&$ION ''$  (($ D))$ H**$ l++$ q,,$ {--$ ..$ //$LATEI00$ 11$ 22$ BUG33$  D 44$ 55$ . 66$ E77$ 88$ 99$ ::$ ;;$ <<$ ING==$ >>$ ??$  ON@@$ 0AA$ e BB$ CC$ DD$ EE$ FF$ GG$ HH$ II$ JJ$  SKK$MISSIONLL$ TMM$ NN$ OO$ PA PP$ HQQ$ }RR$ SS$  TT$  UU$  VV$  WW$ XX$ YY$ ZZ$  [[$  \\$  ]]$  ^^$  __$  ``$  aa$VERSEbb$ING cc$ Edd$ Eee$ ff$ gg$ hh$IED@ii$ jj$ kk$  ll$MMED1mm$PLETSnn$MMBXoo$NOTANSpp$ Uqq$ E8rr$ NCss$ tt$ATEuu$ vv$  Dww$ xx$ &yy$ n zz$ {{$  ||$ }}$ ~~$ $ $ $ $ $ $ $ $  $ $ $ $ $ $ING$ $  ONe$  $  $ $ $DAT$ STN$CONFN$ Y$ ^ $ l$ q$ r$  $ $ING $ , $ G $ p$ $  $ $ $ $ $ $  $ $ $ PWDSYNCH+$ SRVALLOAD$TPHSNAM$ TL$UDRIVERv$WICE$ OK$ $ $ $ $WIDTHS$ YP$ E$ $  $ $ $ $ $ $  $  $  $  $  $ $ $ $ $ $ $  $ $ $ $ $ $ $ $  $ $  SE-%l%-%TYPE-% -% -%  -%  -% !-% #-% $ -% '  -% ( -% ( -% ) -% )-% )-% * -% +-% ,-% /-% 0-% 2-% 4-% 5-% :-% ;-% <-% <-% =-% ?-% @-% @-% @ -% A!!-% A""-% D##-% D$$-% E%%-% F&&-% F''-% F((-% H))-% J**-% K++-% K,,-% M---% N..-% Q //-% R00-% S11-% T 22-% U33-% U44-% U 55-% U66-% V77-% V88-% W99-% X::-% Y;;-% Y<<-% Z==-% [>>-% \??-% ^@@-% ^AA-% `BB-% aCC-% a DD-% b EE-% c FF-% dGG-% eHH-% fII-% f JJ-% gKK-% hLL-% hMM-% h NN-% iOO-% iPP-% i QQ-% jRR-% jSS-% lTT-% lUU-% nVV-% nWW-% oXX-% qYY-% qZZ-% r[[-% s\\-% t]]-% t ^^-% u__-% u``-% vaa-% vbb-% wcc-% w dd-% xee-% yff-% ygg-% yhh-% zii-% zjj-% zkk-% zll-% {mm-% |nn-% }oo-% ~pp-% ~qq-% ~rr-% ~ ss-% tt-% uu-% vv-% ww-% xx-% yy-% zz-% {{-%  ||-% }}-% ~~-% -% -% -% -% -%  -% -% -% -% -% -%  -% -% -% -% -% -% -%  -% -% -%  -%  -% -% -% -% -%  -% -%  -% -% -% -%  -% -% -% -%  -%  -% -%  -%  -% -% -% -% -% -%  -% -% -% -% -% -% -% -% -% -% -% -% -%  -% -% -% -%  $ $ $ $ $  $ !$ '$ *$ 0 $ 1$ 1$ 3$ 4$ 6$ 7$ 9$ D$ E $ F$ M$ N$ Q$ ^$ `$ a$ a $ e$ h$ m$ m$ s$ z$ |$ |$ |$ }$ }$ $ $ $ $ $ $ $ $ $ $  $ $ $ $ $ $ $ $ $  $ $ $ $ $ $ $ $ $ $ $ T$  $  $ $ $ $ !$ )$ .$ 9  $ A   $ F  $ M  $ U  $ f$ m$ x$ {$ }$ $ $ $ $ $ $ $ $ $ $  $ E$ $   $ !!$ ""$ ##$ $$$ %%$ &&$ ''$ (($ ))$ **$  ++$  ,,$  --$  ..$  //$  00$  11$  22$ 33$ 44$ 55$ 66$ 77$ 88$ 99$ ::$ ;;$ <<$ ==$ >>$ ??$ @@$ AA$ BB$ CC$ DD$ EE$ FF$ GG$ HH$ II$ JJ$  KK$ #LL$ $MM$ $NN$ %OO$ %PP$ %QQ$ &RR$ 'SS$ 'TT$ (UU$ )VV$ *WW$ +XX$ +YY$ - ZZ$ .[[$ / \\$ 0 ]]$ 1^^$ 1 __$ 1``$ 2 aa$ 2bb$ 5cc$ 5dd$ 5ee$ 5ff$ 6gg$ 7hh$ 7ii$ 8jj$ 8 kk$ 8ll$ 8mm$ 9nn$ :oo$ :pp$ : qq$ ;rr$ <ss$ <tt$ =uu$ =vv$ =ww$ =xx$ >yy$ @ zz$ @{{$ A ||$ A}}$ C~~$ D$ D$ F$ G$ H$ H$ H$ I $ I$ I$ I$ J$ J$ L $ M$ N$ N$ P$ S$ T$ V$ W$ W $ W$ X$ Y $ Y$ Z$ \$ ]$ _$ `$ `$ a$ a$ b$ b$ d$ e$ e $ f$ g$ h$ h$ i$ i $ j$ k $ k$ m$ m $ m$ n $ n $ p$ p$ q$ q$ q$ r$ s$ t$ u $ u$ u$ v$ v$ w$ x$ x$ y$ y$ {$ {$ |$ |$ ~$ ~$ $ $ $ $ $ $ $ $  $ $ $ $ $ $ $ $ $ $ $ $ $ $  $ $ $ $  $ $ $  $ $ $ $ $ $ $ $ $ $ $  $ $ $ $ $  $ $  $ $ $ $ $ $ $ $ $ $ $ $  $   $   $   $    $   $ $ $ $ $ $ $ $  $ $ $ $ $ $ $ $ $ $ $   $ !!$ ""$ ##$ $$$ %%$ &&$ ''$ (($ ))$ **$ ++$  ,,$ --$ ..$ //$ 00$ 11$ 22$  33$ 44$ 55$ 66$ 77$  88$ 99$ ::$ ;;$  <<$ ==$ >>$ ??$ @@$ AA$ BB$ CC$ DD$ EE$ FF$ GG$ HH$ II$ JJ$ KK$  LL$ MM$ NN$ OO$ IRhPP$ MQQ$ NRR$ GSS$ zTT$ UU$ VV$ REWW$ @XX$ QYY$ RZZ$ {[[$ | \\$ } ]]$ ~ ^^$  __$ ``$ aa$ bb$ cc$ dd$FOREee$ ff$INKSgg$ RDhh$PARTYii$ Sjj$ kk$ ll$ mm$ nn$  oo$ pp$ qq$  rr$  ss$  tt$  uu$  vv$  ww$ xx$  yy$  zz$  {{$ ||$ }}$ ~~$ $ $ )$ * $ 2$ 3$ 3$ 4$ 5 $ 7 $ 9$ <$ =$ > $ ?$ ? $ @$ @ $ B$ B$ C$ E$ L$ M$ M$ O $ P$ Q$ Q$ Q$ R$ R $ R$ U$ V$ W$ W$ Z$ [$ \$ _$ _$ `$ `$ `$ a$ b$ d$ d$ f$ f$ f$ g$ j$ j$ j$ k$ p$ q$ t$ t$ u$ w$ y$ {$ $ $ $ $ $  $ $ $ $ $ $ $ $ $ $ $ $ $ $  $  $  $  $ $ $ $ $ $ $ $ $ $ $ $ $ $  $ $ $ $ $ $  $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $  $  $OSE8$ U $UGH$RDCRERR$ERR$EAD$ <  $ =  $ A  $ A  $ D   $ $ $ $ERRORA$ E $OUGH$  $ $ $ $ $ $ ID$ E $ m$ $ ME $  $   $ !!$ ""$ ##$ $$$ %%$ &&$ ''$ !(($ "))$ , **$ 0++$ 2 ,,$ 3--$ 8..$ 8//$ >00$ ?11$ @22$ E33$ F44$ G55$ K66$ L 77$ O88$ Q99$ _::$ _;;$ g<<$ o==$ p>>$ t??$ y @@$ z AA$  BB$ CC$  DD$ EE$ FF$ GG$ HH$ II$ JJ$  KK$ LL$ MM$ NN$ OO$ PP$ QQ$ RR$  SS$  TT$ UU$  VV$ WW$ XX$ YY$  ZZ$ [[$  \\$  ]]$ ^^$ __$ ``$ aa$ bb$ cc$  dd$ D ee$  ff$ Bgg$ Uhh$ pii$ jj$ kk$ ll$ mm$ nn$ oo$ pp$ qq$OUTprr$_OUTss$NOTSETtt$OUTuu$ 5vv$ 9ww$ Bxx$ eyy$ wzz$ ~{{$ ||$ }}$ ~~$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ R$ !$ 3$ B $ C $ j $ $ $ $SETUP'$ S $TAMP$ORDSCB$UPDSCB$PCUFLOW$ R$LNG$ THq$NYI$TLEv$ $TRUNC$KNOVF$LKINUSE$ V7$ MF$ O$EXP$ P,$ $  $MBXX$ s$ $ R$ S$ CP$ $ $ $ $LDERR$NOTLD$ $SERV$_LOAD$ T$ V$ NS$ODAY$ISCON$KEN$ $ $ NEa$ O$ $ $ $ $ $  $ $ $ $ $ $ $  $ $ $ $  $ $ $  $ !$ !$ "$ " $ %$ ( $ )$ *$ , $ 0$ 2$ 2$ 5$ 6$ 9$ 9$ <$ C$ E$ F$ I$ K $ L$ M$ M$ O$ W$ Z $ [ $ \ $ \$ \$ ] $ _$ _$ b$ d$ d$ g$ h$ i $ i$ k$ k$ l$ l$ l  $ o  $ q  $ r  $ u  $ v$ $ $ $ $ $  $ $ $ $ $ $ $ $ $ $ $ $   $ !!$ ""$  ##$  $$$ %%$  &&$ ''$ (($ ))$ **$ ++$ ,,$ --$  ..$ //$ 00$ 11$ 22$ 33$  44$ 55$ 66$ 77$ 88$  99$ ::$ ;;$ <<$ ==$ >>$ ??$ @@$ AA$ BB$ CC$ DD$ EE$ FF$ GG$ HH$ II$ JJ$ KK$ LL$ MM$ NN$ OO$ PP$ QQ$ RR$ SS$ TT$ UU$ VV$ WW$ XX$ YY$ ZZ$ [[$ \\$ ]]$ ^^$ __$ ``$ aa$ bb$ cc$ dd$ ee$ ff$ gg$ hh$ ii$ jj$ kk$ ll$ mm$ nn$  oo$  pp$  qq$ rr$ ss$ tt$ uu$ vv$ ww$ xx$ yy$ zz$ {{$ ||$ }}$ ~~$ $ $ $ $ $ $DEEP$FEW$CAS$LONGs$ $ $MANCLS$ IFM$NOD$PAS$ Y$ $AJL$ RGS$ $COL$ELTS$ RLBUF($LEV$ NAM$OPENKEY$PARAM$ IPCMD)$RECS$  DS$SUB$USERS$VER$NYARG$  S$ $DLM$ENDR$FIL$  ES$LIB$OPND$ $PSEC$ $UCH*$CLASS$DATA$INFO$ _MANY_ARGSr$ NY$ P$ $ $ LINETRUNC$OFDOC$RBS{$QUIT$TAL7$ O $ $ $ $_SKP$WDR$ PDISABLED$SFAOERR$INVBLK$TERM$UTCERR$ U $_SERVER$ QE{$ $RACE$ ~$ $ $ $BACK $ C $ G$ H$ $  $ $ $IGN $ $ NG$ $ILER$INGO$ NSACTION$ $ $ $ $ $ $ $ $  $ $  $  $ ( $ ?$ D$ K$ ^$ _$ j$ u $ $ $ $ $  $ $ $ $ $ $  $  $  $ $ $ $ $ $ $ $ $  $ $   $   $  S   $    $CALLER  $RIPTION $FER$ !$ "$ & $ '$ - $ =$ ?$ E$ O$ U$ c$ e $ z $ $ $  $   $ !!$ ""$ RED<##$  S$$$INSTR%%$ T@&&$ION ''$  (($ D))$ H**$ l++$ q,,$ {--$ ..$ //$LATEI00$ 11$ 22$ BUG33$  D 44$ 55$ . 66$ E77$ 88$ 99$ ::$ ;;$ <<$ ING==$ >>$ ??$  ON@@$ 0AA$ e BB$ CC$ DD$ EE$ FF$ GG$ HH$ II$ JJ$  SKK$MISSIONLL$ TMM$ NN$ OO$ PA PP$ HQQ$ }RR$ SS$  TT$  UU$  VV$  WW$ XX$ YY$ ZZ$  [[$  \\$  ]]$  ^^$  __$  ``$  aa$VERSEbb$ING cc$ Edd$ Eee$ ff$ gg$ hh$IED@ii$ jj$ kk$  ll$MMED1mm$PLETSnn$MMBXoo$NOTANSpp$ Uqq$ E8rr$ NCss$ tt$ATEuu$ vv$  Dww$ xx$ &yy$ n zz$ {{$  ||$ }}$ ~~$ $ $ $ $ $ $ $ $  $ $ $ $ $ $ING$ $  ONe$  $  $ $ $DAT$ STN$CONFN$ Y$ ^ $ l$ q$ r$  $ $ING $ , $ G $ p$ $  $ $ $ $ $ $  $ $ $ PWDSYNCH+$ SRVALLOAD$TPHSNAM$ TL$UDRIVERv$WICE$ OK$ $ $ $ $WIDTHS$ YP$ E$ $  $ $ $ $ $ $  $  $  $  $  $ $ $ $ $ $ $  $ $ $ $ $ $ $ $  $ $  SEl%}%l% TYPENOTFNDUl% REDEFINEl% Fl% Sl% l% 1l% Hl% o  l%  l%MISMCH l%UAEERR l% F_ l% l%GETERRl%OPNERRl% BFl% MAPEXCEDl% CBl% l% l% l% l% l%ODE l% l% $l% : l% DAl%PORTl%EFCLIl%PSC l% F!!l% ""l%ENV##l%SYM$$l% ;%%l%_BKS&&l% LK''l% S((l%ETP))l%  **l% ++l% ,,l% --l% IC..l% //l% 00l% 11l% 22l% C33l% J44l% f55l% x 66l% 77l% 88l% 99l% ::l% ;;l% <<l% ==l% >>l% ??l%ERR@@l% DAAl%  BBl%  CCl% DDl% GEEl%ICONERRFFl%OPENERR GGl% WIDGETERR HHl%_INVIIl%LENGTHJJl% TKKl% KNFACILITY LLl% ME MMl% NABLCREVA NNl% EOOl% PPl%  QQl%  RRl%  SSl%  TTl% UUl% VVl% WWl% XXl% YYl% ZZl% [[l%  \\l%  ]]l%  ^^l% __l% ``l% #aal% (bbl% (ccl% )ddl% )eel% *ffl% +ggl% +hhl% ,iil% -jjl% -kkl% .lll% 0mml% 3nnl% 4ool% 4ppl% 8qql% ; rrl% Kssl% Lttl% Ouul% Ovvl% Qwwl% Txxl% Uyyl% W zzl% [{{l% \ ||l% \}}l% ^~~l% ^ l% ^l% _l% _l% _l% `l% a l% bl% cl% c l% dl% g l% m l% pl% pl% wl% xl% xl% {l% {l% }l% ~l% ~l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l%  l% l% l% l% l% l% l% l% l%  l% l% l% l% l% l% l% l% l% l%  l% l% l% l% l%  l% l% l% l% l% l% l% l% l% l%  l% l% l% l% l% l% l%  l% l%  l%  l% l% l% l% l%LGLOLABl%IGNEDl% l% l% l% l% l% l% tl% l%FIXl%RELOl% _SP_LOADl%MEMSTOl%STKREFl%RYOPERl%SEFCl% SOCIATEDl% VAILABLE$l% > l% Fl% Ql% kl% l% l% l% l% l% l%CHANGEDol% pl% l%ROSSED;l% <l%DECCALLl%JSBl%LAREDl% l%FENTRYl% Rxl%INEDl% l% l% l% l% l% l% !l% "l% #  l% $   l% %  l% &  l% '  l% (l% )l% *l% +l% ,l% 6l% :l% <l% pl% |l% }l% l% l% l% l% l% l% l%   l% !!l% ""l% ##l% $$l% %%l% &&l% ''l% ((l% ))l% **l% ++l% ,,l% --l% ..l% //l% PROC00l% _FAT11l%LINK22l%OUTPUT33l%SYM44l% 55l%NTAX66l%TYPE 77l%XFRAD!88l% "99l% R ::l% ! ;;l% " <<l% # ==l% $ >>l% % ??l% & @@l% AAl%FLOW BBl%  CCl%  DDl% XEEl% Y FFl% YGGl% HHl% IIl%  JJl%  KKl%  LLl%  ED MMl%STOODNNl% XP#OOl%FIL$PPl%KEY%QQl%OPTION&RRl%SYM'SSl%TERNAM(TTl% OP)UUl%  S*VVl%TYP+WWl%WIDCLA,XXl%ECLIERR-YYl%XPDEOFVZZl%ECTED [[l% \\l% ]]l% -^^l% .__l% .``l% /aal% /bbl% 0ccl% 1ddl% 2eel% 3ffl% 4ggl% 4hhl% 5iil% 5jjl% Bkkl% Mlll% Qmml% Vnnl% ^ool% i ppl% yqql% ~rrl% ssl% ttl% uul% vvl% wwl% xxl% yyl% zzl% {{l%  ||l% }}l% ~~l% l% l% l% l% l% l% l% l% l% l% l%  LYd l% l% l% l% l% RR2l% 3l% 4l%IOINT5l%RED6l%GRANTEDx l%IBUSl% 9l% l%  l% l% l% MP7l% LEMENTEDZl% l% l%NITEXC8l%IALIZED8l%QUEPl% Ql%  l% LY7l% l% T l% l% /l% 0l% :l% ;l% @ l% A l% Il% Ol% Vl% Xl% Yl% Yl% [l% ^l% _l% al% bl% cl% dl% el% nl% ol% pl% wl% wl% xl% yl% zl% zl% {l% |l% }l% ~ l% ~l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l%  l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l%  l% l% l% l%  l% l% l% l% l% l% l% l%   l%   l%   l%   l%   l% l% l% l% l% l% l% l% l%  l% l% l% l% l% l% l% l% l%  l%   l% !!l% ""l% ##l% $$l% %%l% &&l% ''l% ((l% ))l% **l% ++l% ,,l% --l%  ..l% //l% 00l% 11l% 22l% 33l%  44l% 55l%  66l% 77l% 88l% 99l% ::l% ;;l% <<l% ==l% >>l% ??l% @@l% AAl% BBl% CCl% DDl% EEl% FFl%  GGl% HHl% IIl% JJl% KKl%  LLl% MMl%  NNl% OOl% PPl% QQl% RRl% SSl% TTl% UUl% VVl% WWl% XXl% YYl% ZZl% [[l% \\l% ]]l% ^^l% __l% ``l% aal% bbl% ccl% ddl% eel%  ffl% ggl% hhl% SNiil% Sjjl% ekkl% lll% mml% nnl% ool% ppl%VERSAL3qql% 4rrl% 9ssl% Fttl% uul% vvl% wwl%STAR9xxl%KADAP:yyl%CLASS;zzl% PU<{{l% =||l%SCOMP>}}l%DEV?~~l% @l%ENTRYAl%SCAPEBl%SEQCl%GRPFLG+l%KEYWORDDl%LEXICALEl%MSGFl%NOPRGl% WNl%  l% l% l% 'l% +l% ,l% 0l% 0l% 4l% 5l% :l% ;l% <l% =l% =l% =l% >l% ?l% @l% Al% Bl% Cl% Dl% El% Fl% Gl% Hl% Jl% Kl% Ll% Ml% Nl% Ol% Pl% Ql% Rl% Tl% Tl% Ul% Vl% Wl% ^l% ml% nl% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l%ADAPTERHl% CLEARINGHOUSIl% _COMMANDJl% FLAGKl% TAGLl%PRQMl%OBJECTNl%TYPEl%PCODEOl%PKTFMTPl%REPLYQl%STRTRl%UFACSl%STATUSTl%RTYPEl%TYPEUl% Vl%WNDESCWl%LESS9l%INKINGYl%WORKERRYl%KVOLZl%OADRl% Xl%ABLEU l% l% l% ED[l% CK_l% ED\l% ]l% RR^l% _l%INGZl% ^l%_PENXl%MAP.l%FIL.l%PEDl% RK l% ED l%  l%  l%TCHED l% ,l% Ll% l% ODIFIABLEil% pl% l%NAMED!l% =l% zl% l%OWNEDl%PACKINGJ l%RIKW`l%OCESSEDal% bl% cl%PARMa  l%QUALb  l% c  l%QUAKWd  l%OTED  l%RAVELEDl%CHCODEel% MDfl%DEPyl%NNMzl% EACHABLEel% gl% hl% il%DABLESl% l% l%SONABLE l%CENCl%OGNIZEDl% 0l% ;l% Tl% U  l% ]!!l% `""l% c##l% d$$l% e%%l% f&&l% j''l% k((l% l))l% m**l% n++l% o,,l% p--l% q..l% r//l% s00l% t11l% u22l% v33l% x44l% 55l% 66l% 77l% 88l% 99l% ::l%  ;;l%VERABLE<<l% ==l%  >>l% ??l% @@l%STAoAAl% MTpBBl% qCCl%_MODjDDl%QUALnEEl%VERBrFFl%LVOLsGGl%SBOUND8HHl%OLVED IIl%FORCODtJJl%KEYuKKl% vLLl%SAFEwMMl%GTFMTNNl%ECKWxOOl%LECTMPPl%  EDQQl% NTRRl%FILFMTSSl% TRTTl%HELVEUUl% VVl%  DyWWl%  RRzXXl% {YYl%INGzZZl% {[[l%OLICIT|\\l% PECIFIED]]l% ^^l% __l%LNKGl``l%TABLEaal% ubbl% CKccl%LEV}ddl% UCCESSFULeel% A ffl%ITABLEggl% hhl%PASSIGN~iil%CNVjjl%OMBOPkkl%FMTlll%LVL"mml%PIDXOPnnl%ORTED ool% ppl% "qql% 1rrl% 1ssl% 2ttl% 3uul% =vvl% Kwwl% f xxl% lyyl% vzzl% }{{l% ~||l% ~}}l% ~~l% l% l% l% l%  l% l% l% l% l% l% l% l% l% l% l% l% l%  l%  l% l% l% l% l% l% l% l% l% l% l% l% l%RELOPl%SEQOPl%REVLVL3l%TCPUl%TIRl%_QUALl%TERMARGl% l%CONDl% l%INATEDl% l% l% l%SUBSH,l% ILy l% z l% l%USABLE l% EDl%VSTATUSl%WANTEDpl% ql% l% l%INDKl% l% l%  l%INGl%RITE{l%XINTEXCl%PCTSTSl%SIGNALl%PDATEl% l% l% l% l% Fl% Hl% Kl%  l% l%  l% l% l% l% l% l% l% l% l% l% l% l%  l% l% l% l% l% l% Dl% l% Dl% Dl% cl% l%  l%  l% l% l% l% l% l% RIl% Jl% Rl% Sl%INGl%  l% Ql% dl% l% l% l%ENTRYl%RRSl%SECENTl%URTRAVl%GRADEl% >l% |l% l% D%l% -l%NAM|l% RR}l% S}l% Il%LEVELl%RETl%STKl% SCNOCONTRI3l% l%RELGBL4l% l% RE  l% R  l%SABLE  l% GE   l% ,   l% rl% l% l% l%CALLl% El% l% l% l%  l% l% l% l%  l% %l% (l% * l% *l% 6  l% 6!!l% 7""l% >##l% @$$l% F%%l% H &&l% K''l% K((l% M))l% `**l% b++l% p,,l% s--l% v..l% x //l% 00l% 11l% 22l% 33l%  44l% 55l% 66l% 77l% 88l% 99l% ::l% ;;l% <<l% ==l% >>l%  ??l% @@l% AAl% BBl% CCl% DDl% EEl%  FFl% GGl% HHl% IIl% JJl% KKl% LLl% MMl% NNl%  OOl%  PPl%  QQl%  RRl% SSl%ACTNODTTl% NSUUl% D VVl%  WWl% XXl%  YYl% #ZZl% +[[l% -\\l% 2]]l% 9 ^^l% D__l% G``l% Saal% Xbbl% Yccl% jddl% reel% x ffl% ggl% hhl%  iil% jjl% kkl% lll%  mml%  nnl% ool% ppl%  qql%  rrl% ssl% ttl%  uul%  vvl% wwl% xxl% yyl% zzl% {{l% ||l%FLORES}}l% ~~l% Rl% l%  l% l% l% l% l% l% l% l%  l% l% l% l% l% #l% 'l% )l% . l% 1l% 2l% 6l% 6l% Gl% Vl% [l% ^ l% _ l% bl% pl% ql% vl% }l% ~l% l% l% l% l% l% l% l%  l% l% l% l%  l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l%  l% l% l% l% l% l%  l%  l% l% l% l%  l%  l%  l% l% l% l% l% l% l% l% l% l%ABORT~l%UTHl% DISABLEDl%SABLl%EXCl%FILESl%NAMEl% l% l% l% l% l%QSTl% SF l% ^ l% l%PECl%VALl% Sl%UDFENVl% l%LSYl%NDEFpl% l% l% ACC|l% SYMV<l% l%_ERRORl%GOSUBl% TOl%ING l%  l% 0l% 6l% 7l% X  l% ^  l% l  l% v   l% v  l% zl% l% l% l%  l% l%RINPERRl%TFR'l% l% Zl%TILITYl% l% V5LIBRARYl% ALCNVERRl%ERRl%FAILEDl% l% ID l%   l%  !!l% ""l% ##l% $$l% %%l% '&&l% (''l% *((l% 8))l% < **l% @++l% B,,l% C--l% V..l% [//l% \00l% ^11l% `22l% i33l% l 44l% }55l% 66l% 77l% 88l% 99l% ::l% ;;l% <<l% ==l% >>l% ??l% @@l% AAl% BBl% CCl% DDl%  EEl% FFl% GGl% HHl% IIl% JJl% KKl% LLl% MMl%  NNl% OOl% PPl% QQl% RRl% SSl% TTl% UUl% VVl% WWl% XXl%  YYl% ZZl% [[l% \\l% ]]l% ^^l%  __l%  ``l% aal% bbl% ccl% ddl% eel%ATEffl% ggl% hhl% iil% jjl%IONkkl% nlll% omml% wnnl% ool% ppl% qql% rrl% ssl% ttl%ITY'uul% Lvvl% Twwl% Uxxl% eyyl% szzl%PRI{{l%REQ||l% }}l%TOOBIG~~l% UEl% l% l% l% l%  l%  l%  l% l% l% l% l% l% l%  l% l% l% l% l% l% l% l% l% l% l% l%  l% l% l% l% l% *l% + l% - l% . l% /l% 2l% 5l% 5l% 7l% ;l% <l% =l% >l% ?l% @l% Al% Al% Bl% Cl% El% Fl% Gl% Ml% P E% %%VALUEP% R% S% V% V% W% W% W % X % Y % _ % b  % f% h% i% m% r% r% s% t% t% u% v % w % x% x% x% z% {% {% } % ~ !!% ~""% ##% $$% %%% &&% ''% ((% ))% **% ++% ,,% --% ..% //% 00% 11% 22% 33%  44%  55% 66% 77% 88% 99% ::% ;;% <<% ==% >>% ??% @@% AA%  BB%  CC% DD%  EE% FF% GG% HH% II% JJ% KK%  LL% MM% NN% OO% PP% QQ% RR% SS% TT% UU% VV% WW% XX% YY% ZZ% [[% \\% ]]% ^^% __% ``% aa% bb% cc% dd% ee% ff% gg% hh% ii% jj% kk% ll% mm% nn% oo% pp% qq% rr% ss% tt% uu% vv% ww% xx% yy% zz% {{% ||% }}% ~~% % % %  % % % % % % % % % % % %  % %  % %  % % % % % % % % % % % % % % % % % % % %  %  % % % l% l% l% l% l% l%  l% l% l% l% l% l% l% l% l%  l% l% l% l% l% l% l% l% l% l%  l% l% l% l% l%  l% l% l% l% l% l% l% l% l% l%  l% l% l% l% l% l% l%  l% l%  l%  l% l% l% l% l%LGLOLABl%IGNEDl% l% l% l% l% l% l% tl% l%FIXl%RELOl% _SP_LOADl%MEMSTOl%STKREFl%RYOPERl%SEFCl% SOCIATEDl% VAILABLE$l% > l% Fl% Ql% kl% l% l% l% l% l% l%CHANGEDol% pl% l%ROSSED;l% <l%DECCALLl%JSBl%LAREDl% l%FENTRYl% Rxl%INEDl% l% l% l% l% l% l% !l% "l% #  l% $   l% %  l% &  l% '  l% (l% )l% *l% +l% ,l% 6l% :l% <l% pl% |l% }l% l% l% l% l% l% l% l%   l% !!l% ""l% ##l% $$l% %%l% &&l% ''l% ((l% ))l% **l% ++l% ,,l% --l% ..l% //l% PROC00l% _FAT11l%LINK22l%OUTPUT33l%SYM44l% 55l%NTAX66l%TYPE 77l%XFRAD!88l% "99l% R ::l% ! ;;l% " <<l% # ==l% $ >>l% % ??l% & @@l% AAl%FLOW BBl%  CCl%  DDl% XEEl% Y FFl% YGGl% HHl% IIl%  JJl%  KKl%  LLl%  ED MMl%STOODNNl% XP#OOl%FIL$PPl%KEY%QQl%OPTION&RRl%SYM'SSl%TERNAM(TTl% OP)UUl%  S*VVl%TYP+WWl%WIDCLA,XXl%ECLIERR-YYl%XPDEOFVZZl%ECTED [[l% \\l% ]]l% -^^l% .__l% .``l% /aal% /bbl% 0ccl% 1ddl% 2eel% 3ffl% 4ggl% 4hhl% 5iil% 5jjl% Bkkl% Mlll% Qmml% Vnnl% ^ool% i ppl% yqql% ~rrl% ssl% ttl% uul% vvl% wwl% xxl% yyl% zzl% {{l%  ||l% }}l% ~~l% l% l% l% l% l% l% l% l% l% l% l%  LYd l% l% l% l% l% RR2l% 3l% 4l%IOINT5l%RED6l%GRANTEDx l%IBUSl% 9l% l%  l% l% l% MP7l% LEMENTEDZl% l% l%NITEXC8l%IALIZED8l%QUEPl% Ql%  l% LY7l% l% T l% l% /l% 0l% :l% ;l% @ l% A l% Il% Ol% Vl% Xl% Yl% Yl% [l% ^l% _l% al% bl% cl% dl% el% nl% ol% pl% wl% wl% xl% yl% zl% zl% {l% |l% }l% ~ l% ~l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l%  l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l%  l% l% l% l%  l% l% l% l% l% l% l% l%   l%   l%   l%   l%   l% l% l% l% l% l% l% l% l%  l% l% l% l% l% l% l% l% l%  l%   l% !!l% ""l% ##l% $$l% %%l% &&l% ''l% ((l% ))l% **l% ++l% ,,l% --l%  ..l% //l% 00l% 11l% 22l% 33l%  44l% 55l%  66l% 77l% 88l% 99l% ::l% ;;l% <<l% ==l% >>l% ??l% @@l% AAl% BBl% CCl% DDl% EEl% FFl%  GGl% HHl% IIl% JJl% KKl%  LLl% MMl%  NNl% OOl% PPl% QQl% RRl% SSl% TTl% UUl% VVl% WWl% XXl% YYl% ZZl% [[l% \\l% ]]l% ^^l% __l% ``l% aal% bbl% ccl% ddl% eel%  ffl% ggl% hhl% SNiil% Sjjl% ekkl% lll% mml% nnl% ool% ppl%VERSAL3qql% 4rrl% 9ssl% Fttl% uul% vvl% wwl%STAR9xxl%KADAP:yyl%CLASS;zzl% PU<{{l% =||l%SCOMP>}}l%DEV?~~l% @l%ENTRYAl%SCAPEBl%SEQCl%GRPFLG+l%KEYWORDDl%LEXICALEl%MSGFl%NOPRGl% WNl%  l% l% l% 'l% +l% ,l% 0l% 0l% 4l% 5l% :l% ;l% <l% =l% =l% =l% >l% ?l% @l% Al% Bl% Cl% Dl% El% Fl% Gl% Hl% Jl% Kl% Ll% Ml% Nl% Ol% Pl% Ql% Rl% Tl% Tl% Ul% Vl% Wl% ^l% ml% nl% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l%ADAPTERHl% CLEARINGHOUSIl% _COMMANDJl% FLAGKl% TAGLl%PRQMl%OBJECTNl%TYPEl%PCODEOl%PKTFMTPl%REPLYQl%STRTRl%UFACSl%STATUSTl%RTYPEl%TYPEUl% Vl%WNDESCWl%LESS9l%INKINGYl%WORKERRYl%KVOLZl%OADRl% Xl%ABLEU l% l% l% ED[l% CK_l% ED\l% ]l% RR^l% _l%INGZl% ^l%_PENXl%MAP.l%FIL.l%PEDl% RK l% ED l%  l%  l%TCHED l% ,l% Ll% l% ODIFIABLEil% pl% l%NAMED!l% =l% zl% l%OWNEDl%PACKINGJ l%RIKW`l%OCESSEDal% bl% cl%PARMa  l%QUALb  l% c  l%QUAKWd  l%OTED  l%RAVELEDl%CHCODEel% MDfl%DEPyl%NNMzl% EACHABLEel% gl% hl% il%DABLESl% l% l%SONABLE l%CENCl%OGNIZEDl% 0l% ;l% Tl% U  l% ]!!l% `""l% c##l% d$$l% e%%l% f&&l% j''l% k((l% l))l% m**l% n++l% o,,l% p--l% q..l% r//l% s00l% t11l% u22l% v33l% x44l% 55l% 66l% 77l% 88l% 99l% ::l%  ;;l%VERABLE<<l% ==l%  >>l% ??l% @@l%STAoAAl% MTpBBl% qCCl%_MODjDDl%QUALnEEl%VERBrFFl%LVOLsGGl%SBOUND8HHl%OLVED IIl%FORCODtJJl%KEYuKKl% vLLl%SAFEwMMl%GTFMTNNl%ECKWxOOl%LECTMPPl%  EDQQl% NTRRl%FILFMTSSl% TRTTl%HELVEUUl% VVl%  DyWWl%  RRzXXl% {YYl%INGzZZl% {[[l%OLICIT|\\l% PECIFIED]]l% ^^l% __l%LNKGl``l%TABLEaal% ubbl% CKccl%LEV}ddl% UCCESSFULeel% A ffl%ITABLEggl% hhl%PASSIGN~iil%CNVjjl%OMBOPkkl%FMTlll%LVL"mml%PIDXOPnnl%ORTED ool% ppl% "qql% 1rrl% 1ssl% 2ttl% 3uul% =vvl% Kwwl% f xxl% lyyl% vzzl% }{{l% ~||l% ~}}l% ~~l% l% l% l% l%  l% l% l% l% l% l% l% l% l% l% l% l% l%  l%  l% l% l% l% l% l% l% l% l% l% l% l% l%RELOPl%SEQOPl%REVLVL3l%TCPUl%TIRl%_QUALl%TERMARGl% l%CONDl% l%INATEDl% l% l% l%SUBSH,l% ILy l% z l% l%USABLE l% EDl%VSTATUSl%WANTEDpl% ql% l% l%INDKl% l% l%  l%INGl%RITE{l%XINTEXCl%PCTSTSl%SIGNALl%PDATEl% l% l% l% l% Fl% Hl% Kl%  l% l%  l% l% l% l% l% l% l% l% l% l% l% l%  l% l% l% l% l% l% Dl% l% Dl% Dl% cl% l%  l%  l% l% l% l% l% l% RIl% Jl% Rl% Sl%INGl%  l% Ql% dl% l% l% l%ENTRYl%RRSl%SECENTl%URTRAVl%GRADEl% >l% |l% l% D%l% -l%NAM|l% RR}l% S}l% Il%LEVELl%RETl%STKl% SCNOCONTRI3l% l%RELGBL4l% l% RE  l% R  l%SABLE  l% GE   l% ,   l% rl% l% l% l%CALLl% El% l% l% l%  l% l% l% l%  l% %l% (l% * l% *l% 6  l% 6!!l% 7""l% >##l% @$$l% F%%l% H &&l% K''l% K((l% M))l% `**l% b++l% p,,l% s--l% v..l% x //l% 00l% 11l% 22l% 33l%  44l% 55l% 66l% 77l% 88l% 99l% ::l% ;;l% <<l% ==l% >>l%  ??l% @@l% AAl% BBl% CCl% DDl% EEl%  FFl% GGl% HHl% IIl% JJl% KKl% LLl% MMl% NNl%  OOl%  PPl%  QQl%  RRl% SSl%ACTNODTTl% NSUUl% D VVl%  WWl% XXl%  YYl% #ZZl% +[[l% -\\l% 2]]l% 9 ^^l% D__l% G``l% Saal% Xbbl% Yccl% jddl% reel% x ffl% ggl% hhl%  iil% jjl% kkl% lll%  mml%  nnl% ool% ppl%  qql%  rrl% ssl% ttl%  uul%  vvl% wwl% xxl% yyl% zzl% {{l% ||l%FLORES}}l% ~~l% Rl% l%  l% l% l% l% l% l% l% l%  l% l% l% l% l% #l% 'l% )l% . l% 1l% 2l% 6l% 6l% Gl% Vl% [l% ^ l% _ l% bl% pl% ql% vl% }l% ~l% l% l% l% l% l% l% l%  l% l% l% l%  l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l% l%  l% l% l% l% l% l%  l%  l% l% l% l%  l%  l%  l% l% l% l% l% l% l% l% l% l%ABORT~l%UTHl% DISABLEDl%SABLl%EXCl%FILESl%NAMEl% l% l% l% l% l%QSTl% SF l% ^ l% l%PECl%VALl% Sl%UDFENVl% l%LSYl%NDEFpl% l% l% ACC|l% SYMV<l% l%_ERRORl%GOSUBl% TOl%ING l%  l% 0l% 6l% 7l% X  l% ^  l% l  l% v   l% v  l% zl% l% l% l%  l% l%RINPERRl%TFR'l% l% Zl%TILITYl% l% V5LIBRARYl% ALCNVERRl%ERRl%FAILEDl% l% ID l%   l%  !!l% ""l% ##l% $$l% %%l% '&&l% (''l% *((l% 8))l% < **l% @++l% B,,l% C--l% V..l% [//l% \00l% ^11l% `22l% i33l% l 44l% }55l% 66l% 77l% 88l% 99l% ::l% ;;l% <<l% ==l% >>l% ??l% @@l% AAl% BBl% CCl% DDl%  EEl% FFl% GGl% HHl% IIl% JJl% KKl% LLl% MMl%  NNl% OOl% PPl% QQl% RRl% SSl% TTl% UUl% VVl% WWl% XXl%  YYl% ZZl% [[l% \\l% ]]l% ^^l%  __l%  ``l% aal% bbl% ccl% ddl% eel%ATEffl% ggl% hhl% iil% jjl%IONkkl% nlll% omml% wnnl% ool% ppl% qql% rrl% ssl% ttl%ITY'uul% Lvvl% Twwl% Uxxl% eyyl% szzl%PRI{{l%REQ||l% }}l%TOOBIG~~l% UEl% l% l% l% l%  l%  l%  l% l% l% l% l% l% l%  l% l% l% l% l% l% l% l% l% l% l% l%  l% l% l% l% l% *l% + l% - l% . l% /l% 2l% 5l% 5l% 7l% ;l% <l% =l% >l% ?l% @l% Al% Al% Bl% Cl% El% Fl% Gl% Ml% P E%})&%VALUE1% % % 2% % % 3% 4 %EXIST % RR % S  % * % 8% x% % % % %OVRFLOW% _NOTALLOWED%_PWR2% REQUIRED%RIABLE%  % 7% { % %  % % %  %  S" !!% ""% ##% $$% NTi%%% &&% S''% TH((%SIZSTK))%VALUE**%_FIX++%SFULL,,%OVF--% X..% -//% .00% / 11% 1 22% 833% C44% G55% d66% e77% o88% 99% ::%  ;;% <<% ==% >>% ??% @@% AA% BB% CC%CLUSTERDD% EE%DUMP.FF%_IN_USEGG% NOTPAGALGN-HH% uII% BNJJ%  KK% LL% ,MM% 1NN% 3OO% 4PP% 9QQ% ;RR% VSS% uTT% wUU% wVV% xWW% ~XX% YY% ZZ%  [[% \\% ]]% ^^% __% ``% aa% bb%ERRORcc%MAPFAILdd%ISSINGee%PASTEOFff% CALNORCVgg% Bhh% ii% jj% kk%LIMll% Smm% nn%ESLIMoo%ECALIGNpp%CTXERRqq%DISrr%EMULTRss% FILMISMATtt%ULLuu%INUSEvv%TORww% xx% yy% zz% {{% ) ||% / }}% 0~~% 0 % 1 % 8% 9% <% <% =% >% ?% @% A% B% C% C% D % D% E% Q % R % S % T % U % V % W % X % f% p% r % r% u% v% |% % %  %  %  %  %  %  %  %  % % % % % % % % % % % % % % % % % % % % % %INSTR% S8% % _%TABLE% _FLOOVEMAT%UNDMAT% INVARGMAT% LOGZERNEG% SQUROONEG%TOBIG%UNDEXP%NDOR@ % % % R% Br% s% t% w % x % % % % IFICATION % % 7% F% W% W% Z% \% ]% `% d% p% q% % % % % % %  % Yk % l %ERR%ING% _CONVERSION%LOW%RES%SELECT%ION% % %  %  %  % %  % % % % % (% (% -% /% 4% 7% 9% @ % B% E% K% M  % O   % P  % R   % [  % \% `% `% a % g % h% i% j% k% l% }% % % % %  % % %   % !!%  ""% ##% $$% %%%  &&% ''%  ((%  ))% **% ++% ,,% --% ..% //% 00% 11%  22% 33% 44% 55% 66% 77% 88% 99% ::% ;;% <<% S==% Y >>% ??% @@% AA% BB%KEWCC% _MISMATCHDD%TOEDEE% FCFF% IAYGG% q HH% II%EWERWJJ% KK% RWLL% ING_TIME MM%PORTNN% OO% PP%OLATESQQ%ION RR% SS% NTT% ]UU% ^VV% ^WW% XX% YY% ZZ% [[%RLICIGN\\%TUAL]]% ^^% __%  ``%  aa% bb% cc% dd% ee% ff% gg% hh%  ii% jj% kk%  ll% mm%  nn%  oo% " pp% -qq% .rr% 8ss% @ tt% A uu% Hvv% Iww% L xx% Nyy% Ozz% O {{% O||% Q}}% R~~% R% S% T% W% Y % Y% \% ^% _% b% o % u% z % { % | % ~% % % % %  % % % % % % % % % % % % % % % %  % %  %  % %  % %  % %  % %  % %  % %  % %  % % %  % % % % % % % % % % % %  % % % % % %SIBLE % MBA % Y% % % % % % % % I% S% !% '% * % 3% 4% 6% 7 % 7% 9% O % o% % %$BUFFER_OBJECT_UR%COMMONZ%MEM_RESIDENT_US%CLUSTER$% @ % % % _CALL_SIGn% x% {% OIALREXI% CE"%_ID% L$y% 1% % %ALRMNT%TILE % %FID%IDENT%NSET% % V%LABERR% MISMATCH%OUNT%NAMj% k% E% OTPRESENT% UMj% k%OERR% OO%PRO% SETALRMNT%NAMj% k  %SIZj  % k  % TS  %HDWMEM  %TATUS%UME% % % % %  % % % %  % % % %  % % % #% $  % &!!% '""% (##% *$$% ,%%% ,&&% ,''% -((% -))% .**% . ++% 0,,% 1--% 3..% 6//% 700% :11% ;22% ;33% <44% >55% D 66% E 77% E 88% F 99% F::% G;;% H <<% H==% K>>% M??% N@@% OAA% PBB% PCC% QDD% REE% SFF% SGG% WHH% Y II% ZJJ% \KK% _ LL% _MM% _NN% _OO% `PP% bQQ% bRR% c SS% cTT% cUU% eVV% fWW% fXX% g YY% gZZ% h [[% h\\% i]]% j ^^% k __% l ``% naa% p bb% q cc% rdd% see% uff% ugg% y hh% yii% }jj%  kk% ll%  mm% nn% oo%  pp% qq% rr% ss%  tt% uu% vv% ww% xx%  yy%  zz% {{% ||% }}% ~~% % %  % %  % % % % % % %  %  %  % % % % %  % % %  % % % % %  % % % % % % % % % % % % % % %  % % % % % %  %  % % % % % % % % % % % % % % % % % S% - % / % g% h% i% % % %  % % _ACCESSIBILIT%FULL%NTARILY%SED% PNN % QLBADUSE% WACKQEMPTY% IT% % % % % '% B% G % K% m % v% % % % %AST%DEVRDY%ERR%IDLEBCB% NG % % U% V% Y% t% % % % % % % % % % % % %DMT% RESOURCE%KEUP% NT% % @ % ` % w%RNING % (% @% B % C % g% q% % % % %   % S?  % @  % @  %    % % %SUE% S% % % %  %  % % %  %  % %  % % % %   %  !!% ""% ##%  $$% $%%% &&&% '''% (((% )))% )**% )++% *,,% +--% -..% -//% .00% 011% 122% 233% 344% 355% 4 66% 577% 588% 599% 6::% 9;;% :<<% ===% = >>% =??% @@@% AAA% EBB% FCC% GDD% GEE% HFF% IGG% KHH% LII% PJJ% RKK% RLL% T MM% W NN% ]OO% aPP% fQQ% f RR% gSS% iTT% jUU% lVV% nWW% nXX% n YY% qZZ% t[[% t\\% x]]% y^^% {__% |``% ~aa% ~ bb% ~cc%  dd% ee% ff% gg% hh% ii% jj% kk% ll% mm% nn% oo% pp% qq%  rr% ss% tt% uu% vv% ww% xx%  yy% zz% {{% ||% }}% ~~% %  % % % % % % % % % % % %  % % % % % % % % % % % % % % % %ECC% Y% BE% M_NOTAVAILc%STARTEDd% e% CB% % % %FCBMNG% C% S% 4% %CORR% DW_MAXPREV%  M%EAK% % %_KEY%  D%IGHT% % NT% R% E% 8% :% ;% <% >% A% B% G% H% i% k% o% q% | % } % % % % %  % % % % % % FR%HEN%  % 7% T% l% }% % % % % % % %  % % %  %ICH:% B% I% R% V% W% t% u% % % % % % LE % % % % % #% &% *% , % 0% 4% ; % D% F% M% V % W% W% X% Y % `% i% m % p% p% q  % z  % {  % ~  %   % % % % % % %  % % % % % %IDE% R% ST%GET % % %% ,  % !!% ""% MISMATCH ##% TH$$$% 6%%% &&% ''% ((% ))% **% LD++% ,,% --%  ..%CARD //%  00% 11% 022% 633% ^44% z55% 66% 77% 88% 99% ::% ;;% <<% ==%  Sl>>%ONCAT ??%OUTVER @@% LAA% BB%  CC%  DD% EE% FF% GG% HH% !II% (JJ% 9KK% @LL% AMM% BNN% B OO% GPP% \QQ% d RR% hSS% nTT% qUU% rVV% vWW% {XX% YY% ZZ% [[% \\% ]]%  ^^% __% ``% aa% bb% cc% dd% ee% ff% gg% hh% ii% jj%  kk% ll% mm%  nn% oo%  pp% qq%USERMS rr% NDNOTMAPPED ss%VIStt% OWuu% vv%  ww% xx% 'yy% =zz% >{{% ||% }}% ~~% % % %  % % % OBJCLASS% SR% S% a% %EXISTS% K% TRUNCFIT%REDo% TH% % % %  %  %  %  %  % % %  % %  % % % !% !% " % #% %% %% &% &% '% (% )% )% )% *% *% +% ,% -% .% . % / % /% 0% 0% 1% 1% 2% 2% 3% 5% 5% 6% 6% 7 % 7% 8% 9% A% D % D % D% E% E% H% J % J% K% K% L % N% O% P% Q% R % S% S% U% X% Z% Z% Z% \% _% _ % `% ` % a% a % b% b% c % e % f% i% l% n% n% p % r% s% s% u% z% {% {% }% % %  % % % % % % % % %  % % % % % % % % % %   %   %   %   %   % % % %  % % %  % % %  % % % % % % % % %   % !!% ""% ##% $$%  %%% &&% ''% ((% ))% **% ++% ,,% --% ..% //%  00%  11% 22% 33% 44% IN55% 66% 777% 788% :99% K::% V;;% Z <<% e==% f>>% h??% i@@% kAA% sBB% CC% DD%  EE% FF% GG% HH% II%OUT7JJ% IKK% [LL% \MM% NN% OO% PP% QQ% RR% LDSS% TT%NOTALWDUU% KVV% ON3 WW% RD XX% YY%  ZZ% [[% \\% t]]%  ^^%ALSTK__% S``% Kaa% bb% cc% dd% ee% &ff% K gg% Yhh% c ii% jj% kk% ll% mm% FILEFAILnn%INGoo% pp% % qq% < rr% =ss% Ltt% Xuu% \vv% ]ww% ^xx% _yy% `zz% a{{% t||%  }}%  ~~% % % %STATION%_DEV% LD%ULD% PL%RGARCH% SUBSHSYN/%IRSPMSG%SMBMBX%TABLE% ]% % E% % % %  %  % % % %  % !% '% (% *% +% -% 0% 2% 3% 6% 7% <% =% >% N% U% V% V% Z% Z% \% a% b% d% e% n% n % t% u % y% y % | % % % % % % % % % %  % % % % % % % %  % P E)&h&)&WRITE)& )& )& )& )& )& % 4 %EXIST % RR % S  % * % 8% x% % % % %OVRFLOW% _NOTALLOWED%_PWR2% REQUIRED%RIABLE%  % 7% { % %  % % %  %  S" !!% ""% ##% $$% NTi%%% &&% S''% TH((%SIZSTK))%VALUE**%_FIX++%SFULL,,%OVF--% X..% -//% .00% / 11% 1 22% 833% C44% G55% d66% e77% o88% 99% ::%  ;;% <<% ==% >>% ??% @@% AA% BB% CC%CLUSTERDD% EE%DUMP.FF%_IN_USEGG% NOTPAGALGN-HH% uII% BNJJ%  KK% LL% ,MM% 1NN% 3OO% 4PP% 9QQ% ;RR% VSS% uTT% wUU% wVV% xWW% ~XX% YY% ZZ%  [[% \\% ]]% ^^% __% ``% aa% bb%ERRORcc%MAPFAILdd%ISSINGee%PASTEOFff% CALNORCVgg% Bhh% ii% jj% kk%LIMll% Smm% nn%ESLIMoo%ECALIGNpp%CTXERRqq%DISrr%EMULTRss% FILMISMATtt%ULLuu%INUSEvv%TORww% xx% yy% zz% {{% ) ||% / }}% 0~~% 0 % 1 % 8% 9% <% <% =% >% ?% @% A% B% C% C% D % D% E% Q % R % S % T % U % V % W % X % f% p% r % r% u% v% |% % %  %  %  %  %  %  %  %  % % % % % % % % % % % % % % % % % % % % % %INSTR% S8% % _%TABLE% _FLOOVEMAT%UNDMAT% INVARGMAT% LOGZERNEG% SQUROONEG%TOBIG%UNDEXP%NDOR@ % % % R% Br% s% t% w % x % % % % IFICATION % % 7% F% W% W% Z% \% ]% `% d% p% q% % % % % % %  % Yk % l %ERR%ING% _CONVERSION%LOW%RES%SELECT%ION% % %  %  %  % %  % % % % % (% (% -% /% 4% 7% 9% @ % B% E% K% M  % O   % P  % R   % [  % \% `% `% a % g % h% i% j% k% l% }% % % % %  % % %   % !!%  ""% ##% $$% %%%  &&% ''%  ((%  ))% **% ++% ,,% --% ..% //% 00% 11%  22% 33% 44% 55% 66% 77% 88% 99% ::% ;;% <<% S==% Y >>% ??% @@% AA% BB%KEWCC% _MISMATCHDD%TOEDEE% FCFF% IAYGG% q HH% II%EWERWJJ% KK% RWLL% ING_TIME MM%PORTNN% OO% PP%OLATESQQ%ION RR% SS% NTT% ]UU% ^VV% ^WW% XX% YY% ZZ% [[%RLICIGN\\%TUAL]]% ^^% __%  ``%  aa% bb% cc% dd% ee% ff% gg% hh%  ii% jj% kk%  ll% mm%  nn%  oo% " pp% -qq% .rr% 8ss% @ tt% A uu% Hvv% Iww% L xx% Nyy% Ozz% O {{% O||% Q}}% R~~% R% S% T% W% Y % Y% \% ^% _% b% o % u% z % { % | % ~% % % % %  % % % % % % % % % % % % % % % %  % %  %  % %  % %  % %  % %  % %  % %  % %  % % %  % % % % % % % % % % % %  % % % % % %SIBLE % MBA % Y% % % % % % % % I% S% !% '% * % 3% 4% 6% 7 % 7% 9% O % o% % %$BUFFER_OBJECT_UR%COMMONZ%MEM_RESIDENT_US%CLUSTER$% @ % % % _CALL_SIGn% x% {% OIALREXI% CE"%_ID% L$y% 1% % %ALRMNT%TILE % %FID%IDENT%NSET% % V%LABERR% MISMATCH%OUNT%NAMj% k% E% OTPRESENT% UMj% k%OERR% OO%PRO% SETALRMNT%NAMj% k  %SIZj  % k  % TS  %HDWMEM  %TATUS%UME% % % % %  % % % %  % % % %  % % % #% $  % &!!% '""% (##% *$$% ,%%% ,&&% ,''% -((% -))% .**% . ++% 0,,% 1--% 3..% 6//% 700% :11% ;22% ;33% <44% >55% D 66% E 77% E 88% F 99% F::% G;;% H <<% H==% K>>% M??% N@@% OAA% PBB% PCC% QDD% REE% SFF% SGG% WHH% Y II% ZJJ% \KK% _ LL% _MM% _NN% _OO% `PP% bQQ% bRR% c SS% cTT% cUU% eVV% fWW% fXX% g YY% gZZ% h [[% h\\% i]]% j ^^% k __% l ``% naa% p bb% q cc% rdd% see% uff% ugg% y hh% yii% }jj%  kk% ll%  mm% nn% oo%  pp% qq% rr% ss%  tt% uu% vv% ww% xx%  yy%  zz% {{% ||% }}% ~~% % %  % %  % % % % % % %  %  %  % % % % %  % % %  % % % % %  % % % % % % % % % % % % % % %  % % % % % %  %  % % % % % % % % % % % % % % % % % S% - % / % g% h% i% % % %  % % _ACCESSIBILIT%FULL%NTARILY%SED% PNN % QLBADUSE% WACKQEMPTY% IT% % % % % '% B% G % K% m % v% % % % %AST%DEVRDY%ERR%IDLEBCB% NG % % U% V% Y% t% % % % % % % % % % % % %DMT% RESOURCE%KEUP% NT% % @ % ` % w%RNING % (% @% B % C % g% q% % % % %   % S?  % @  % @  %    % % %SUE% S% % % %  %  % % %  %  % %  % % % %   %  !!% ""% ##%  $$% $%%% &&&% '''% (((% )))% )**% )++% *,,% +--% -..% -//% .00% 011% 122% 233% 344% 355% 4 66% 577% 588% 599% 6::% 9;;% :<<% ===% = >>% =??% @@@% AAA% EBB% FCC% GDD% GEE% HFF% IGG% KHH% LII% PJJ% RKK% RLL% T MM% W NN% ]OO% aPP% fQQ% f RR% gSS% iTT% jUU% lVV% nWW% nXX% n YY% qZZ% t[[% t\\% x]]% y^^% {__% |``% ~aa% ~ bb% ~cc%  dd% ee% ff% gg% hh% ii% jj% kk% ll% mm% nn% oo% pp% qq%  rr% ss% tt% uu% vv% ww% xx%  yy% zz% {{% ||% }}% ~~% %  % % % % % % % % % % % %  % % % % % % % % % % % % % % % %ECC% Y% BE% M_NOTAVAILc%STARTEDd% e% CB% % % %FCBMNG% C% S% 4% %CORR% DW_MAXPREV%  M%EAK% % %_KEY%  D%IGHT% % NT% R% E% 8% :% ;% <% >% A% B% G% H% i% k% o% q% | % } % % % % %  % % % % % % FR%HEN%  % 7% T% l% }% % % % % % % %  % % %  %ICH:% B% I% R% V% W% t% u% % % % % % LE % % % % % #% &% *% , % 0% 4% ; % D% F% M% V % W% W% X% Y % `% i% m % p% p% q  % z  % {  % ~  %   % % % % % % %  % % % % % %IDE% R% ST%GET % % %% ,  % !!% ""% MISMATCH ##% TH$$$% 6%%% &&% ''% ((% ))% **% LD++% ,,% --%  ..%CARD //%  00% 11% 022% 633% ^44% z55% 66% 77% 88% 99% ::% ;;% <<% ==%  Sl>>%ONCAT ??%OUTVER @@% LAA% BB%  CC%  DD% EE% FF% GG% HH% !II% (JJ% 9KK% @LL% AMM% BNN% B OO% GPP% \QQ% d RR% hSS% nTT% qUU% rVV% vWW% {XX% YY% ZZ% [[% \\% ]]%  ^^% __% ``% aa% bb% cc% dd% ee% ff% gg% hh% ii% jj%  kk% ll% mm%  nn% oo%  pp% qq%USERMS rr% NDNOTMAPPED ss%VIStt% OWuu% vv%  ww% xx% 'yy% =zz% >{{% ||% }}% ~~% % % %  % % % OBJCLASS% SR% S% a% %EXISTS% K% TRUNCFIT%REDo% TH% % % %  %  %  %  %  % % %  % %  % % % !% !% " % #% %% %% &% &% '% (% )% )% )% *% *% +% ,% -% .% . % / % /% 0% 0% 1% 1% 2% 2% 3% 5% 5% 6% 6% 7 % 7% 8% 9% A% D % D % D% E% E% H% J % J% K% K% L % N% O% P% Q% R % S% S% U% X% Z% Z% Z% \% _% _ % `% ` % a% a % b% b% c % e % f% i% l% n% n% p % r% s% s% u% z% {% {% }% % %  % % % % % % % % %  % % % % % % % % % %   %   %   %   %   % % % %  % % %  % % %  % % % % % % % % %   % !!% ""% ##% $$%  %%% &&% ''% ((% ))% **% ++% ,,% --% ..% //%  00%  11% 22% 33% 44% IN55% 66% 777% 788% :99% K::% V;;% Z <<% e==% f>>% h??% i@@% kAA% sBB% CC% DD%  EE% FF% GG% HH% II%OUT7JJ% IKK% [LL% \MM% NN% OO% PP% QQ% RR% LDSS% TT%NOTALWDUU% KVV% ON3 WW% RD XX% YY%  ZZ% [[% \\% t]]%  ^^%ALSTK__% S``% Kaa% bb% cc% dd% ee% &ff% K gg% Yhh% c ii% jj% kk% ll% mm% FILEFAILnn%INGoo% pp% % qq% < rr% =ss% Ltt% Xuu% \vv% ]ww% ^xx% _yy% `zz% a{{% t||%  }}%  ~~% % % %STATION%_DEV% LD%ULD% PL%RGARCH% SUBSHSYN/%IRSPMSG%SMBMBX%TABLE% ]% % E% % % %  %  % % % %  % !% '% (% *% +% -% 0% 2% 3% 6% 7% <% =% >% N% U% V% V% Z% Z% \% a% b% d% e% n% n % t% u % y% y % | % % % % % % % % % %  % % % % % % % %  % P Eh&m%h& WRITEACT"h&TTR#h&BACK$h&LOCK%h&OOT&h&CHECK'h& REC(h& UR) h&ERR* h& + h& , h& - h& .h& /h& 0h& wh& REC0h&HDR1h&EADER2h&OME3h&IBMAP4h&JNLACE5h&LOCK6h&NABLE7h&RRS8h& S8h&BMAP9h& CB:h& ;h& <h&FAIL h&ING!!h& ""h&  ##h&  $$h&  %%h&  &&h& ''h& ((h& ))h& #**h& $++h& %,,h& &--h& *..h& +//h& ,00h& -11h& .22h& /33h& 044h& 155h& 366h& 477h& 588h& 599h& 7::h& 8;;h& 9<<h& :==h& ;>>h& ;??h& ?@@h& MAAh& PBBh& QCCh& SDDh& WEEh& XFFh& YGGh& h HHh& kIIh& k JJh& m KKh& vLLh& vMMh& wNNh& OOh& PPh& QQh&  RRh& SSh& TTh& UUh& VVh& WWh& XXh& YYh& ZZh& [[h& \\h& ]]h&LCK=^^h&OARG>__h&TEN ``h& aah&  bbh& Ycch& f ddh& geeh& u ffh& {ggh& } hhh&  iih& jjh& kkh& llh& mmh& nnh&  ooh& pph& qqh& rrh& ssh& tth& uuh& vvh& wwh&NERS?xxh&ONG$yyh& 9zzh& A{{h& B||h& E}}h& F~~h& Gh& Jh& Kh& Lh& Mh& Nh& Oh& Wh& jh& h& h&  h&  h&  h&ACMODE@h& PAh&DRVfh&MUTEXBh&OWNERCh&PARTXh&STATEDh&VEREh& OLFh& Gh& Hh& UIh&UMARGJh& Kh& Lh& Mh& Nh& Oh&TBITMAPPh&FILQh&HOMBLKRh&IBMAPSh&NDZROTh&VBUFUh&HDRVh&JNL_AIJWh&BIJXh&RUJYh&PGSBAKZh& SINCLUSTERh&LENOVAL\h&PAGCNT]h&VANVAL^h&XVANMAT_h&SIZEERR`h&XABh& E h& ah& bh& h& UTHNOTUPDh&_LOCKEDh&DBSFq h&ERRORh&LATEh& MLh& NFbh&ORERRSch& QPdh& h&ERRdh&SMBRSeh& VALNOTVALID@h& XXh& *h& 8h& ;h& <h& Oh& Th& vh&  h& h& h& h& h& h& h& h& h& h& X h& h& h& XXQh& vh& Xh& h& X h& h& h&  h&  h& h& h& h& h& -h& 0 h& 0h& 1h& 3h& 4h& 5h& 8h& 8h& 9h& :h& ;h& <h& =h& A h& Lh& }h& h&  h&  h& h&  h& h& h& h& h& h&  h&  h&  h&  h& h& h& h& h& h& h&   h&   h&   h&   h&   h& h& h& h& h& h& h& h& h& h& h&  h& h&  h&  h& h& h&  h&  h&   h& !!h& ""h& ##h&  $$h& %%h&  &&h&  ''h&  ((h&  ))h&  **h&  ++h&  ,,h&  --h&  ..h&YES2//h& 700h& w11h& 22h& 33h& T44h& 55h& 466h& 5 77h& H 88h& 99h& ::h&  ;;h& <<h& ==h& >>h& ??h& @@h&IELDAAh& OU BBh& CCh& DDh& EEh& 2 FFh& : GGh& @ HHh& ` IIh& `JJh& eKKh& wLLh& MMh& NNh& OOh&  PPh& QQh& RRh& SSh& TTh& UUh& VVh& WWh&  XXh& YYh& ZZh& R[[h&  \\h& 2]]h& O ^^h& ___h& ```h& `aah& abbh& ecch& oddh& s eeh& ffh& ggh& hhh& iih& jjh& kkh& llh& mmh& YYTnnh& Y@ooh& pph&ZAPqqh&EROrrh& ssh& tth& uuh& vvh&  wwh& 5 xxh& 6 yyh& 7 zzh& 8{{h& 8 ||h& 8 }}h& 9 ~~h& Hh& Oh& Wh& Xh& fh& ih& uh& }h& h& h& h& h&  h& h&  h&  h&  h& h&  h&  h& h& h& h& h& h&  h& h&  h&  h&ALLOCLSh& EDgh& hh& jh& kh&INGph& qh& h& h& SLh&LENfh&INKgh&NODEhh&PAGEih&ORTjh&REFCh&SECh&RVICEkh&ONEh& h& h& ZZh& k%  % % %  % % % % % % % % % % % %  % % % % % %SIBLE % MBA % Y% % % % % % % % I% S% !% '% * % 3% 4% 6% 7 % 7% 9% O % o% % %$BUFFER_OBJECT_UR%COMMONZ%MEM_RESIDENT_US%CLUSTER$% @ % % % _CALL_SIGn% x% {% OIALREXI% CE"%_ID% L$y% 1% % %ALRMNT%TILE % %FID%IDENT%NSET% % V%LABERR% MISMATCH%OUNT%NAMj% k% E% OTPRESENT% UMj% k%OERR% OO%PRO% SETALRMNT%NAMj% k  %SIZj  % k  % TS  %HDWMEM  %TATUS%UME% % % % %  % % % %  % % % %  % % % #% $  % &!!% '""% (##% *$$% ,%%% ,&&% ,''% -((% -))% .**% . ++% 0,,% 1--% 3..% 6//% 700% :11% ;22% ;33% <44% >55% D 66% E 77% E 88% F 99% F::% G;;% H <<% H==% K>>% M??% N@@% OAA% PBB% PCC% QDD% REE% SFF% SGG% WHH% Y II% ZJJ% \KK% _ LL% _MM% _NN% _OO% `PP% bQQ% bRR% c SS% cTT% cUU% eVV% fWW% fXX% g YY% gZZ% h [[% h\\% i]]% j ^^% k __% l ``% naa% p bb% q cc% rdd% see% uff% ugg% y hh% yii% }jj%  kk% ll%  mm% nn% oo%  pp% qq% rr% ss%  tt% uu% vv% ww% xx%  yy%  zz% {{% ||% }}% ~~% % %  % %  % % % % % % %  %  %  % % % % %  % % %  % % % % %  % % % % % % % % % % % % % % %  % % % % % %  %  % % % % % % % % % % % % % % % % % S% - % / % g% h% i% % % %  % % _ACCESSIBILIT%FULL%NTARILY%SED% PNN % QLBADUSE% WACKQEMPTY% IT% % % % % '% B% G % K% m % v% % % % %AST%DEVRDY%ERR%IDLEBCB% NG % % U% V% Y% t% % % % % % % % % % % % %DMT% RESOURCE%KEUP% NT% % @ % ` % w%RNING % (% @% B % C % g% q% % % % %   % S?  % @  % @  %    % % %SUE% S% % % %  %  % % %  %  % %  % % % %   %  !!% ""% ##%  $$% $%%% &&&% '''% (((% )))% )**% )++% *,,% +--% -..% -//% .00% 011% 122% 233% 344% 355% 4 66% 577% 588% 599% 6::% 9;;% :<<% ===% = >>% =??% @@@% AAA% EBB% FCC% GDD% GEE% HFF% IGG% KHH% LII% PJJ% RKK% RLL% T MM% W NN% ]OO% aPP% fQQ% f RR% gSS% iTT% jUU% lVV% nWW% nXX% n YY% qZZ% t[[% t\\% x]]% y^^% {__% |``% ~aa% ~ bb% ~cc%  dd% ee% ff% gg% hh% ii% jj% kk% ll% mm% nn% oo% pp% qq%  rr% ss% tt% uu% vv% ww% xx%  yy% zz% {{% ||% }}% ~~% %  % % % % % % % % % % % %  % % % % % % % % % % % % % % % %ECC% Y% BE% M_NOTAVAILc%STARTEDd% e% CB% % % %FCBMNG% C% S% 4% %CORR% DW_MAXPREV%  M%EAK% % %_KEY%  D%IGHT% % NT% R% E% 8% :% ;% <% >% A% B% G% H% i% k% o% q% | % } % % % % %  % % % % % % FR%HEN%  % 7% T% l% }% % % % % % % %  % % %  %ICH:% B% I% R% V% W% t% u% % % % % % LE % % % % % #% &% *% , % 0% 4% ; % D% F% M% V % W% W% X% Y % `% i% m % p% p% q  % z  % {  % ~  %   % % % % % % %  % % % % % %IDE% R% ST%GET % % %% ,  % !!% ""% MISMATCH ##% TH$$$% 6%%% &&% ''% ((% ))% **% LD++% ,,% --%  ..%CARD //%  00% 11% 022% 633% ^44% z55% 66% 77% 88% 99% ::% ;;% <<% ==%  Sl>>%ONCAT ??%OUTVER @@% LAA% BB%  CC%  DD% EE% FF% GG% HH% !II% (JJ% 9KK% @LL% AMM% BNN% B OO% GPP% \QQ% d RR% hSS% nTT% qUU% rVV% vWW% {XX% YY% ZZ% [[% \\% ]]%  ^^% __% ``% aa% bb% cc% dd% ee% ff% gg% hh% ii% jj%  kk% ll% mm%  nn% oo%  pp% qq%USERMS rr% NDNOTMAPPED ss%VIStt% OWuu% vv%  ww% xx% 'yy% =zz% >{{% ||% }}% ~~% % % %  % % % OBJCLASS% SR% S% a% %EXISTS% K% TRUNCFIT%REDo% TH% % % %  %  %  %  %  % % %  % %  % % % !% !% " % #% %% %% &% &% '% (% )% )% )% *% *% +% ,% -% .% . % / % /% 0% 0% 1% 1% 2% 2% 3% 5% 5% 6% 6% 7 % 7% 8% 9% A% D % D % D% E% E% H% J % J% K% K% L % N% O% P% Q% R % S% S% U% X% Z% Z% Z% \% _% _ % `% ` % a% a % b% b% c % e % f% i% l% n% n% p % r% s% s% u% z% {% {% }% % %  % % % % % % % % %  % % % % % % % % % %   %   %   %   %   % % % %  % % %  % % %  % % % % % % % % %   % !!% ""% ##% $$%  %%% &&% ''% ((% ))% **% ++% ,,% --% ..% //%  00%  11% 22% 33% 44% IN55% 66% 777% 788% :99% K::% V;;% Z <<% e==% f>>% h??% i@@% kAA% sBB% CC% DD%  EE% FF% GG% HH% II%OUT7JJ% IKK% [LL% \MM% NN% OO% PP% QQ% RR% LDSS% TT%NOTALWDUU% KVV% ON3 WW% RD XX% YY%  ZZ% [[% \\% t]]%  ^^%ALSTK__% S``% Kaa% bb% cc% dd% ee% &ff% K gg% Yhh% c ii% jj% kk% ll% mm% FILEFAILnn%INGoo% pp% % qq% < rr% =ss% Ltt% Xuu% \vv% ]ww% ^xx% _yy% `zz% a{{% t||%  }}%  ~~% % % %STATION%_DEV% LD%ULD% PL%RGARCH% SUBSHSYN/%IRSPMSG%SMBMBX%TABLE% ]% % E% % % %  %  % % % %  % !% '% (% *% +% -% 0% 2% 3% 6% 7% <% =% >% N% U% V% V% Z% Z% \% a% b% d% e% n% n % t% u % y% y % | % % % % % % % % % %  % % % % % % % %  % P EI)YI)ACME, ACME SYS$ACM[WMAC, MACRO-32 CompiNALDISK, Analyze/DiBACKUP, Backup UtiliUGCHECK, System BugCLI, Command Languagluster Port DriverDNS, DIGITAL Distrib EDT EditorNCRYPT, ENCRYPT or XCHANGE, Exchange UILINK, OpenVMS I64 LNSTALL, Install UtiJBC, Job ControllerLAVC, Local Area OpeIB, Library FacilitCENSE, License ManNK, Linker UtilityMACRO, VAX MACRO AsC, MEMORY CHANNELONITOR, Monitor UtiUNT, Mount UtilityOPCOM, Operator ComPCSI, POLYCENTER SofPPD, Point-to-PointRBLD, REBUILD CommanEG, Registry for OpMS, OpenVMS Record REC, RMS RecoverySCACP, Systems CommuDA, System Dump AnaET, SET Command andMG, Screen ManagemeORT, Sort/Merge UtiYSBOOT, System BootINIT, System InitTEM, System ServiTIE, Translated ImagPU, DEC Text ProcesUAF, Authorize UtiliVAXCLUSTER, OpenVMS ABORTINGNSIBEEN CHARACTERSONTINUE DECLAREDISPLAYERRORFILEROMILLEGAL NTERRUPT JOBREQUEUELOCALMESSAGENAMEOTOPENPATHSECT REGOPSYNXVNSIZETRING TERMINALSYPEVALUEWRITEh&%l%$p$#t#""9"!=! A E ]a&26:>F N  V Z ^ bjnr?o}ALREADYALREADY3ALREADY4ALREADY<ALREADY<ALREADY=ALREADY>ALREADY@)) ?                                (   !; " # $ % &< ' (= ) *  +! ," -C .# /$ 0% 1& 2C 3' 4C 5C 6C 7C 8C 9C : C ; C < C = C > C ?C @C AC BC C) D* E+ F, G- H. I/ J0 K1 L2 M3 N4 O5 P6 Q7 R8 S9 T: U9 V= W? X@ YA ZB [E \G ]H ^J _L `N aO bR cT dV eW fY g[ h^ i; j k l  m n  o p  q r  s t ))t\D,pX@( l T < $ hP8 |dL4x`H0@*=*:*7*4*1*.*+*(*%*"******* * ****))))))))))))))))))))))))))))))))))))))))) u v w x y z { | } ~               ! ! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ \ ] + + + + + + + + + + + + + + + + + 1 2 3 4 5 6 7 8 9 : ; < =)) ? ? 1~ 2~ 3~ 4~ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? k l m n o p q r s ' ' ' ' ' ' ' '  '  '  '  '  ' ' ' ' ' !' "' #' $' %' &' '' (' )' *' +' ,' -' .' / ' 0!' 1"' 2#' 3$' 4%' 5&' 6'' 7(' 8)' 9*' :+' ;,' <-' =.' >/' ?0' @1' A2' B3' C4' D5' E6' F7' G8' H9' I:' J;' K<' L=' M>' N?' O@' PA' QB' RC' SD' TE' UF' VG' WH' XI' YJ' ZK' [L' \M')) ]N' ^O' _f `f af bf cf df ef ff g f h f i f j f k f lf mf nf of pf qf rf sf tf uf vf wf xf yf zf {f |f }f ~ f !f "f #f $f %f &f 'f (f )f *f +f ,f -f .f /f 0f 1f 2f 3f 4f 5f 6f 7f 8f 9f :f ;f                                     y y y y y y y &  y !y ' "y         \> ]> ^> _>)) `> a> b> c> d> e> f> g> h> i> j> k> l> m> n> o> p> q> r> s> t> u> v> w> x> y> z> {> |> }> } } } } } } } " #  J !J "J #J $J %J &J 'J h i j  k l m  n  o                                        !  "  #  $  %  &  '  (  )  *  +  ,  -  .  /  0  1  2  3  4 5  6!  7"  8 9#  :$  ;%  <&  ='  >(  ? @ A B C)  D* )) E F+  G,  H-  I.  J K/  L0  M1  N2  O3  P4  Q R S5  T6  U7  V W X Y8  Z9  [:  \;  ]J ^J _J `J aJ bJ cJ dJ e J f J g J h J i J jJ kJ lJ mJ nJ oJ pJ qJ rJ sJ tJ uJ v w x yJ zJ { |J }J ~ J J   !                                       j j j 6   6 6 6 6 6  6 !6 #6 %6 '6 (6 Z] [] \] ]] ^] _])) `] a] b] c] d] e]           ! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 1 3 5 7 9 :F ;F <F =F >F ?F @F AF BF CF DF EF FF GF HF IF JF               F F F F F F  F !F "F #F $F %F &F 'F (F )F *F +F ,F -F .F /F 0F 1F 2F 3F 4F 5F 6F 7F 8F 9F   !  " # $ % & ' ( ) * + , )) - . / 0 1 2 3 4  5! 6" 7# 8$ 9% :& ;' <( =) >* ?+ @, A- B. C/ D0 E1 F2 G3 H5 I6 J7 K8 L9 M: N; O< P= Q> R? S@ TA UB VC WD XE Y Z [  \  ]  ^  _  ` a b c d e f g h i j k l m n o p q r  s! t" u# v$ w% x& y' z( {) |* }+ ~, - . / 0 1 2 3 4 5 6 7 8 9 : ; Tn Un Vn Wn Xn Yn Zn [n \n ]n ^n _n `n an bn cn dn en fn)) gn hn in jn kn ln mn nn on pn qn rn                  ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ \ ] ^ _ ` a b c d e f g h i j             ! " # $ % & ' ( ? @ )) A  a a [> C > #? $? ^ ^ ^ !^ "^ # ^ $ ^ % ^ & ^ ' ^ ( ) * + , - . / 0 1  2  3? 4A 5C 6F 7 8. 9. : ; <. =. >. ?$ @. A: B: CP DQ E( F) G4 H4. I% J  K' L( M) NB. O,b PT: QV: R+ S4 Tm U[r VI Wm XZ: Ym Zm [K \7 ]'m ^9 _L `= a> b? cM dN eD f g h i j" k$ l' m$ nP? oQ? p; q  r ; sU t u v w x y zA {B |% }~ ~*& +& ,&  Sa a y   q  B  B)) B B B   1& b c y y & ' y # / 3 # # # %; ';  y  y * \N * ~ & W y y [    *   \  ] ^ &      d   3    +   @* ! "  3 #   i    i i $ % 3  &   ' 3 (   ) * + !3 , - . / (3 4  0 1 +3       2   3 1 4 5  8 6  ;    7   8 9 :  )) /6 $     W    L                        6 6 6 6 6   ! " # $ % & ' ( ) *F + , -7 . / 0 1+N 2 3 4 5D 6. 7. 8'Z 9.N : . ; <$N =. >. ?%N @. A! B$. C%. D(. E&N F# G0 H$ I8. J2 K<. L?. M@. NC. OF. P( Q/N Rm S* Tm U'N V+ Wm Xm Y- Zm [!m \[: ]0N ^,m _0m `(N a8m b=m c@m dCm e2 f g  h  i j)N k l6 m n o1N p,N )) qGZ r# s*N t( u* v-N w2N x1 y6 z {: |: }~ ~~ ~ ~ : !: #: $: On %: &: ': (: ): *: +:  -: ! _^ U  ~ .: /: 0: 1:  ~  ~ M N ~ P ~ 2: 3:   4: 5: 6:   -B ~ 7: 8: 9: :: 6 ;: ~ <: =: >: .R ?: ' @: +* ;] <] =] >] ?] @] A] B] C] D] E] F] G] H] I] J] N> K& L& N& 3 3  H I <2 'i +i B W; F  H  "3   $3 %3    W  C )) c X ! z R] T] U] Y 3 &  9 B" : ; 6~   P Q v *v   w x y 1v    C $  & b   b ] J   F a  1 a ?  R X / Z Y Z [   \ ] / !/ "/ #/ $/ %/ &/ '/ ( / ) / * / + / ,/ -/ ./ // 0/ 1/ 2/ 3/ 4/ 5/ 6/ 7/ 8 9 : ; <M = >P: ? @ A r B r C D' E( F4Z G! H5. I J  K L+ M<? N=? O- P* Q@? R2 S.b T. UC? V W Xm)) Y Z  [M \@Z ] ^-m _1m `4m aZ b[ cBZ dL? e f< gU^ h4 i^ j" kV^ l"2 mX^ n3 o6 p= q'& r* s- t0 u v. w x y  z" {# |; }1 ~/ O  3  $ +  :  =  ~  ;  -  D  7 H 4& L B Q b^ * , / R d^ U @ %B  y /] D % & '  2] ~ 8 5] k 6] 8] * * &6 *7 p "* ~ ~ ,r 8; v^ :; 9  27 67 =* i v  "  a C& 3 " " "  i " !~  )) i i  %i >2 S&   Y 3 (~ v z ? ; Hn  In M 0" Z& @ A  -6 -~  z .~ P] S] 7"  a a a F a 5~ ;   < j j a a a Q" +v 8~ 9~ a&    9 "j A     & : & D: 3n  ]    F  a ? ?   -  !?  Z  $   '? ! " # $- % & & & '1 (3 )7 *: +; ,< -> .@ /C 0D 1F 2I 3K 4M 5O 6Q 7=6 8& 9U :& ;I <4? = >N ?O @^)) A B C  D E  F& G Hh I<j J& K=. L& M:Z N>6 OU P<n QA? R S: T U5 V W j XJ YK ZL [N \O ]I? ^  _ ` F aDa b  c4 d` eX f\ g\ h; i; jK6 k_ l m- nO oR? pS? qFj r< s. t1 u3 vb w^ x2 y%2 zr {c |Q }@n ~5n B 6 2  G 8 ; /& [Z  7 0& ;  3 Pn " # % I   ; M - 7 ~ 7 7 X  Z 6n +2 ,; "  %r ba 0] Y Z u m^ * a Qn m N o 3 8 ~ 7n -7)) ` u  e  >&  u : / 0 "  9n Fn Gn b   " I& n i . #  < 6 = > v " "" %" T&  J L ( , . 0 N] >   ! "   ,~  v \& ]& ^& 8R 8" 2 9R '     D"   I J     \   R" / 2  E ) S   " @ % #j $j N D H  > . 0 ] ] ] ] ]  ]  ]    , Y *  1   E:   ! "` #b $! %  &, '6 (!b)) )K *? +4 ,r -O .Q /S 0T 1U 2A 3L 4N 5n 6Z 7> 8Sr 9Tr :H ;Vr <Wr =- > ? @  A  B  C  D Ee F.. G6 H;j IR Jk K LG M N O4 Pn Q7 R3 S6 T U V W2 X Y Z9 [: \3 ]4 ^4 _V ` a b8 cCZ dC e f%& g( h* i/ jI kJ l( m&> n o<N p q  r$ s+ t; u= v- wU? xW? y0 z~ {7 |8 }B ~ar br :  : ": H 7 .> 'R )R *R +R @ =  U @ B E G > ? @ A Ta 5& U Lj 6& y C)) Oj *; 8& a 6 .; :& e 9 j  !7 ! " # 6 4; U H ; 3 _ Y 22  >   2* 4* =; G> *6 j J>  ]  " 0 v M>    O> P> 2R 3R 2 ,n 1  3 B C D F G F 8  ;i 3 z  -" ." n )3 V n o ,3           r F n o _& p   J2 b K 83   M r s u v <  =  Z  ?  @  A  Z  &  2 Z  B    T    ))      ,  Z  n    :      V  X  2  0  (  *  ! H "  # I $ " % % & J ' ;n ( ) > *  + G , & - & . %a /  0  1  2 > 3 B 4 I 5 K 6 < 7  8 : 9 : : Ur ; . < ? = 06 >  ? . @  A " B 16 C 26 D ). E ,. F /. G 1. H  I / J  K r L ] M  N +b O . P 0 Q  R & S m T 5 U 6 V & W  X E? Y Aj Z C [ F \ Aa ]  ^ 3 _ : ` V a 2 b > c 4b d 0 e V f & g > h DZ i 6 j 1 k #> l  m 8 n n o b p  q '] r # s : t + u + v > w j x 3 y *> z @ { B | ? } ( ~ )  cr    5 ))   ; 6  ? _Z B %  bZ  7 0 -] B  B 0 V 6 : ; < e^ 7 &n V ^ E `a h^ R Y 3 ia y 2B  L "7 ) V 6; ~ <& V  + # E Z " ;;  37 77 ~ ~  3 / ` a R c 3 M& v 5 @ N; ;2 V v Y E E ] 9 K  <i  L]  &3  ? vn  B D     # I + V] /y 4 K 6   X] 53  I2   ))  93      !j  Ln    D  j  C:    Mn  DN , O b K #    C             >  >  B      &j  /    3  &? & !  " 6 # 9 $ \ % : & < ' E (  ) . * ! + 6 ,  -  .  /  0 R 1  2 0 3 X 4 1 5 $ 6 R 7  8 E 9 % :  ;  <  =  >  ? > @ 9a A IN B n C :a D 7j E 8j F 9j G :j H , I V J V K  L  M  N 6 O 2 P 5 Q 1 R m S m T m U m V :N W J X F? Y c Z ]r [  \  ]  ^  _  `  a  b  c " d # e $ f ' g ) h + i 4n j Q k ' l 7)) m 9 n : o 7 p r q  r & s 9b t :b u 9 v O w x 4 y 8 z ?b { @b |  } A ~ P   ^ Q 3 5 ; S F  ! T  ; O6 V W X Y    Z [ 1 \  !B 7> 9> ;> & J K 7 V : ; i^ j^ >> l^ @> A C o^   /2 ^ n  q * # c ) T   ~ [  ?& 42 @& A& B& D& F& " i " i i U "^ :2 3 /   Z  *y &~ +y K & ) - / I '3 a l m)) 6  7  ( % z   = ?  5 E2 V [ A ) (v u :R ;R  <R =R ?R @R AR 0 0v BR =  yn  |n            W "   Z Z  E  V  W  n  X    R    A^    R      D    F  G  R / ! + " > #  $ # %  & ( ' * ( , ) / * r + r , H - r . e& / g& 0 Z 1  2 > 3 @ 4 B 5 P 6 $b 7  8  9 . : . ; . < @ = . > r ? & @ R A ` B a C 0 D r E  F 2 G 2. H  I 8Z J  K m L p M  N D. O ] P  Q m R  S  T m)) U  V . W X  Y  Z 2 [ 1 \ d ] 0 ^ 5 _ 2m `  a 3 b ! c G6 d 2 e % f Z g r h , i  j  k  l  m # n La o '> p 8 q ) r 9 s  t ; u . v * w ^ x _ y `r z =N { ` | >N } F ~ /  0 1   =r VZ >r  \Z ;  ^Z "r 7 Cn #n ^^   ) 3> ( * . 2 4 1  Mj :> [ $B 2 3 4 5 7 8 : ; b 2; 3; ~ N Qj 7 * % * < M +7 ( ; N <    J "  " P i V , fj e " i U 4 )) i 82 T 0r U &y 'y (y 2 R; -i [ ^ _ 4i U& ?2  <  A2 X& Y& 5 5R -n # 7R ,y -y .y /~ 0~ P @  <" ( ) R "N #N T ?        C '   :        N  >  '  )    sn - 2 1  3            Z      )  V      .  Y  ,  %?  ^ + ! 2 " 5N #  $  % 3 & = ' 2 ( 4 ) 8 *  + M , b - P . R /  0 +? 1 ,? 2 -? 3 > 4 X 5  6 Y 7 $ 8 > 9 Z : W ; ' < A)) =  > J ? 'b @  A . B  C  D Nn E  F 9? G  H ;a I > J h& K j L  M  N ;Z O 9N P > Q  R  S  T  U  V  W  X  Y  Z  [ 2 \  ] (m ^ Ba _ Ca ` 5m a AZ b S^ c  d " e $& f  g b: h c: i 5 j ; k 5 l ) m \ n ^ o ; p T? q R r % s ] t ! u " v # w Pa x R y R z 9 { - | k& } l& ~ e  e  -& 4 6 8   N   S   J B e B B B 4> 7 N 7 7 F 5> n $; ~ > ] [a 'B (B ;& * ( &r ) /B 0B & O ' P 6B 7B 9B)) ( R ,7 F> e _ /R n Xj Zj 1R 3 H> I> K> X 2  *  +   i -  i .  i " $^ %^ $ /i 2  5i 7i +" v 3  #  2 (^  N )^ *^ 4  5   -^ - 2r 5 7  9  < ! = #   L 2^ @ B & B  4^ ;    V  E  G  6^    Z  9^ :^ Z ;^ <^ Z  U    W  !  $    (  HN  +  -    ]  B        )  Z Z ! 5 " ! # " $ #)) %  & > ' F^ ( 5 ) Z * ^ + T , > -  . r / 8 0 < 1 !Z 2  3 K 4  5  6  7 %Z 8 6 9 6 :  ; P <  =  > 6 ? H @  A 3Z B  C T D *. E  F Xr G 1 H i I & J  K % L Q^ M * N + O / P 6 Q -b R ) S 7 T j U : V > W /b X ! Y " Z  [  \  ]  ^ 2 _ ; ` : a 9m b #& c A d = e ; f 3 g 5b h - i G j  k K l L m ; n P o Q p R q S r , s  t  u  v 5 w >b x X? y ; z ; { ; |  } B ~ An   1   ; 9 N6   />  r  " Nb D 2> . / $n  #r Q6 a^  +)) - 0 1 j  ^ ,2 j C /; g^ -R 1] k^ & ' 4] un * F * * 02  * !* #*  &* 3 .* U 3* 5* 7*   v V  Q  E; b v T  @    V  P& - " C K C % v V L  M]  K  N    h i  k  '  . l # .^ 0y G H P r @  L"  K2 6y  Z [ \ ] ^ xn zn  =  > T   '  n ()) B U >^ N ?^  M O Q  S T U W r  Z \  b !c& "R #. $$ % 2 & 'G (G^ )4 *"b +? ,@ -! .  /J 0E 1" 29 3I^ 4J^ 5L 6. 7R 8, 9& :8a ; V <[ =\ >. ?. @. AE BR C D! EO^ F G H I& J^ KN L% M2 NS: O>a P?? Q R4 S  Ta Ub V2 W2 X0b Y1 Za [R^ \7 ]8 ^9 _R ` a:m be cJ? dM? eN? f g] h$ i; j% ka l> mY^ n o4 pR q8b rA sB t;b u) vJ wV? x; y. zL {j& |; } R ~n ; 2)) "R 4  R < (R   Fb 7 8 9 : ; 4  ^ #     P Q ?  7 7 S H C 7 ? D  F   G I )n    ^ n^ 3 Dn N D n  q^ r^ O P 8n :]  3 )  " * 32  `   J R - Q c 3  #  v  K  %y L; 7  3 P; Q& S; 8 j  Z  3 )"    ` n  z  z 9 b e j  $ j .3  +^  03 13 m (  #v       A)) R T   Jn  = Kn e  e    >  U : a 8^  < I   =^     E :n   ( C B^  6 > C a a  E  2 R ! "n #'j $P %/ & ' ( ) *L + ,N - . / 0 1 2V 3-a 4J 5> 6> 7. 8  9R :%b ;. <, =. >. ?b @  A B C D^ E-. F0. G$ H6. I9. J' K) L, M  NE. OG. PU: QW: RX: SY: T. U/ V Wm Xm Ym Zm ["m \$m ]5 ^]: _#] `_: a6 b>m c; dZ e< f g3 h5)) i!> j k l* m n? o pZ^ q7 rE sH t2 u, v: wl: x- y+> zm: {B |9 }. ~7 0  B p: 2 6 : < $ 5  B Gb Ib Kb Lb Ob Qb G Sb Ub 6     > B A y B 2 3 +; ` b d 6 y f g h i K L M K y 5B  )r :B s^ u  3  u u v ,   ^  > " y  "    e  v    I;    N K; ; g $ O; W (i  Q>   2i  ' * &^ '^ J)) F   1" 4 4" BN    & 6  z , - . / " s &v 'v 0^ = + #  b  j 3r ] 7~ ,v :~ :3 V <3      CN +   EN 3N FN 4N V   X GN N  ?  ?  ? )  "? Nr * + ] Z   ! " # $ % & ' ( )  *" +# ,$ -% .& /( 0) 1* 2+ 3<6 4/a 52a 65a 7 8 9> :K^ ;L^ < = > ? @ A B C D E F G  H I J K8N L  M>j N>? O P/ )) QH R S' T: U V W X Y ZD [, \8 ]9 ^^r _< `; a b9 c< d2 e 2 f gO? h; iP j k% l+ m2 n o p" qT r$ s* t u% v& w$V x%V y&V z'V {(V |)V }*V ~+V ,V -V .V /V 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V :V ;V <V =V >V ?V @V AV BV CV DV EV FV GV HV IV JV KV LV MV NV OV PV QV RV SV TV UV                             ))     ! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H           A %    N N a a V H  > D  Z    Z   R $ V Y '  N &  Lr Mr > > +  Or & F 2 M N !O " b #F $] %; &F 'F (6 )M *;6 +D , -I .A /W 0N 1G 2W 3 4C 5E 6 7> 8! )* 9K: :L: ;L <5? =J >) ?- @1Z A B. C* D E F  G" H# I1 J;? Kn L  M3 NT O. P0 Q2 R5 S@j T8 U; V m Wm Xm Ym Zm [#m \%m ])m ^.m _3m `6m a;m b?m cAm dDm e fF g] h$] i j"> k$> l%> m: n4 o(> pb qi: r  s/ t( u v. w/ x+ y! zM {' |/ }C ~0 7 PZ RZ  7 WZ   YZ   ]Z ~ A  ~ aZ ? $ C F B G ; ) O C Q 5 VN WN Va Wa Xa Ya Za \a ]a _a aa ca da ea ga ja   3B ** S     *r R E>  r t F @B  3 17 +  . AB @N     V   AN  v  v  v v v L 0 ' O& ( h i % j  Y; ) k z @2 z R> S>  L M N O P  R S _ Q]  V / q  v  $v t G2 1y   B   b  c 1n z  -v ! * T" < A: < 2 F b A B  E    #   W &   a   %j  H      # R R C^  ** ! & "  #  $L %& &D ' ( R ) / *3 + R ,] -d& .Y /Z 0-j 1/j 20j 31j 42j 53j 64j 75j 86j 9V : ;R < 6 =O: >Y ?. @ AS B] C/ D+ E F Gg H<a IR J:. K>. LS MA. N?j OV PR Q RR SR T U8 Vm W2 X2 Y6 Z m [Bj \N ]b ^/ _R `7m a"n b c d e f g1 h  i j6b kIa lW^ mD nL6 o( p` q6 r8 s' ta u- v/ w x5 y, z]^ { |IZ }LZ ~F o:  e   <  B  +]  : = e e ! H e A ; e ^ 3&   * * P R # F H I # Y \ # @ * ^a  * 7 # y  e ^ ^ ^ ( y * 5; p^  b W   $* '*   n 9; F 0R  e  a %  a i ^  E& G& " .r " " 3  # f 3 W    X N  #"  ( 3i ) 8i + #3 n #   \    # N C2   " $ ( D  b ! 6 /n 0n   : Q /   :   `& .6 F N 8 t "  b b  b I b ; M b * * ? V  S b b   F Z N V    N ^  - $ ' K ]  _ !V "a #+ $ %' &V '+ ( )0 *5 +% , -8 .' /H: 0 1 2  3- 4"Z 5#Z 6$Z 7O 82 92 :2 ;. <" =/ > ?Q @(b A B 6 C&. D E) F, G5Z HR I  J;. K LU M& N  O2 P- Q RV S T UI V/ Wm XMN Ym Z" [Y \ ] ]*m ^2b _ `X a b@ cK? d1 e f  g  h%] i  j4 k&] l m: nEZ oFZ p q! r& s  tI u<b v=b w> x)& yQa zE {R |: ** }; ~C P  E  7 n *] > TN Hj  UN Ij Jj Kj  ~ K L  N d &  y R Ua 8 7& ^ $ ? T E 'n U V L 6 J Z 3]  * -2 B * l T "6 * 9]   + , - (* ,* 07 w  # 6* 8* :* @; >*  a \ r   j  : F  $y G 92  i 86 !i ,6 K] )i  J \  N     V&   *  M B2 6 ] N p   O] % ) O     z 7  ** b : > * O V q   >R d ! 9 "  # > >  F J K F  ! F  Q b  Z  L   ? 2  b   n J F * [ L  G !n " & # $ % &(j ' & (*j )1 * +7 , -@ .B /,j 0I: 1 2J: 3 4# 5 6D 7 8F 9  :X ; V <B = > ? @L AM^ BN C V Dj E" F* G% H^ I=a J6r K* L9Z M n NN O4 P` Q6 R  S T U F V, W X Y. Z F [V \!] ]+m ^/m _ `# aP b cB d** e f g h% i jA ke: l&& m7b ng: o9 p% q" rGj s' t) u4 v  wK x5 y z&2 { |JZ } ~n:  G  F (2  = 7 <    @ `Z I  E 4  $ # V     7 7 W   Nj S (; $r  y  y # $ %  * X  *    5 j   7] #7 $7 '7 (7  ( y  a I Uj   !  47 ;* 1 v v v _ " 62  8 T i  S T  V v  3 R& T; D  # Sn : z 9i**   = W&   2"    u  ! # ^ W> & X> > A D 33 /^ F  :  8 F" C Y] 63  W X  u e  f g 2n  ? B B:     C G n  / 2 4 5 6 8 9 ; < ? @ A  ^ ^    >   , !D^ "E^ #c $e % &0 ' ( )9 * +"a ,#a -$a .&a /'a 0(a 1)a 2*a 3.a 40a 53a 6n 7 8T 9 : . ;. <&b = > ?6? @_ A7? B CR: D E& Fr G H I:? J K=j L3 ** M& N' O0 P1 Q R j S  TB? U< V & W X j Y ZG? [F \Cj ]I ^K _M ``: aQ bNN cBm d eDj fEj g h. iH j; kON lM m ; n& o' p( q7 r s, tPN u v w, x y; z: {HZ |KZ }MZ ~NZ OZ QZ SZ TZ UZ XZ   !r  B %   " C ,:   N M L   ' ( ) B )2   c^ 7 *2 _ 9& -; H  * X  *  * y % 'r * ' * * %7 B> )7 N t^  .7 )* -* /* 1*  = ?  <* 3 i B;** N S gj H& " " ?  i i /     A X          d :i [ e f   T> U> V> 6R  & " -3   % + * v  v !v "v %v  z z  z 2y 3y 4y 5y Y . # 4r 7r 3 8r  @ ?r @r Ar Br Cr Dr Er Fr Gr Hr Ir Jr Kr  7 " % N P   a a b I b % Z R a   - ! "7 # $(? % &) ' ( ) *#b +U ,6N -9 .f& /9 0  1H 2J 3n 4:*"* 5> 6 7S 8& 9] :M: ;r <N: =  >Q: ?& @  A!. B6 C'. D6 En F] G3. H7. I: J: K: L: M2 N O?a PW Q@a R S<Z T=Z U?Z V W X Y Z [ \&m ]{ ^ _ `"& a  bT^ cFa d e7 f g hHa i= jd: kJa lKa mf: nh: oB pC qj: rF sk: tOa u v)> w(& x6 y9 zP {  | }  ~Ab Bb Cb Db Eb -> 9 $R y K 2 Hb Jb 3 Mb Pb 5 Rb Tb 7 `^ J B  !;  T . "B #B = 4 5 * &B Q )B H 0; 1; fa ha "*%*               %* b /7  x O <; >; ?; A; ~ aj dj  ~ C; F; j #y  J& S "   M; "~ Rn #~ $~ %~ U; V; &" '~ )~ *~ U   z z  z  /" 3" V @  E  F 5" : ,^ 4 T W] z =" ?" @" A" C" E" G" H" J" M" P"  V   3^ O : U"    " V 7^ (   ] b b&       V    X   & Z ] Z Z Z  %*(*    a   !  "F: # a $!a %  & '2 (- ) *Pr +5 , -*? .G: /N 0 1= 2+a 3/? 4& 54a 66a 77a 8 9G :& ; <( = >Z ?\ @ A& Bb C6 DR EM F# G*b H Ij Jl Ko L M N O P Q Rm SX T m U V W X0 Y\r Z [1b \/ ]"] ^ _3b `6 a<m bS c d e f g h i! j# k& l( mi& n@ o$ pMa qNa r(] sr t< u> v: w^ x  y? zB {= |B }B ~* Ra   r 7 .& #R %R Q R    B     B(*+*  B = B + u S ]  B $ G XN YN ZN ! [N ]N  *B +B ,B 7  7 * * * (r 4B 3 ~ 8B ;B 7; 12 +r >B Sj Tj Vj Wj Yj [j \j ]j ^j _j bj ej  L> -r u   /r   i v      7  Q; B !" $" '" X; Z; v *" v v N > +~   b     Q [& 6"  ` v , 9" :" >" Y> *  U V " I" S - U V  V S" 0 5r P ;  5^ {n    +*.*   : : : :    b   # > 2 @ 2    6 , .  G  G  1 ! "L2 # $ % & ' ( )2 * +6 , - 2 .: /; 0  1 2,a 3 R 41a 5Y 6= 7&Z 8. 9(Z :*Z ;+Z <,Z =-Z >.Z ?/Z @2Z A". BJN Cj DN^ E  F> G6Z H7Z I2 J( K6 Ltn M N, OYr PZr Q1 R/ S/ T/ U/ V/ WD? X N Y Z0 [?6 \@6 ]A6 ^B6 _C6 `D6 aE6 bF6 cH6 dI6 eJ6 f g h i; j ; k l m# n5 o36 p46 q56 r66 s76 t uO v= w$2 x?.*1* y@ zN {B |R }N ~   P M6 '2 I J &R   ; ; ,R   ; 0>  7 P6 a O K r  ";  7 7 #;  &; ); 7  c <>  M ^ I J   3 *  Pj Rj Q $ $6 <B = 9 : u^  * 0*   - " 57 +n  cj  "  52 3 " ,  J;  =  ? i i "i #i &i *i ,i .i 0i G I 6i M    g ,"  O   *3  ' *  D2 v ; < Q B 231*4* ! 8  :  43 " < K" N" 73 7 ? $   D ( ;3 V"  > w  x Z Z  +   P @  &  = 2  @^  = ) A B C D E F H I J K L !M "N #O $P %Q &R 'S (T )U *V +W ,X -Y .Z /[ 0\ 1 2 3 4 5 6 7 8 9  :  ;F <] =N >& ?] @& A)b B8 CK D7N EM2 FN2 GO2 HP2 IQ2 JR2 KS2 LT2 MU2 NV2 OW2 PX2 QY2 RZ2 S[2 T\2 U]2 V^2 W_2 X`2 Ya2 Zb2 [c2 \ ] ^_ _ `Y 4*7* aEa b;N ca: dGa e8 f! g$ h!2 i0 j k[ l#2 mN nA o pR qD rG s)] t  u  v6 w; x7 y,> z< {> |: }D ~a D   QN RN SN ! "  ? > , " n n 1> cZ & % < > r , %n T @ 9  O    7    W (n => .B ?> ?N 1B A> .2 y $ &7 C> D> =B X  n s S *n j )6  " 9* F +6 `j # i  " " i  i 72 !^ ,  @ 1 A 4R #^ 0   1   )y 1i7*:*  ("   j j          a 8  e e $ /3 ' .   C ;"  : n E F2 S Z> H2 E , O" 1^  !V "V 1 .v /v Q R r r Z Z  > a        > %   Z Z  ' )    . 0  !  D Z 4 F H ![ "8 #N $  % &:6 ' (Q )R *S +V ,= -H^ . /] 0Qr 1Rr 2 R 3[ 4\ 5; 6 7r 8r 9)Z :2 ;j <2 =] >[ ?' @% Aj Bc Cn Dd Ef F  GLN HF:*=* I/ J F K F L M N6 O Pj Q!n R S T r U  V j W X! Y ZH? [W \\: ]!& ^^: _O ` a7 b: c d e f2 g> h i! j=n k l m_r n>n o p q) r?n sV t[^ u\^ v8 w0 x  y: z {6 |@ }!R ~2  1  3 4 Bn 7 ZZ  > ! A  N     7 2&  7 F ,]  N ^ B D E   6> 8> T  .] r f^  F * V G S  V I       3 3 ^  ?B ** . =&  3 En   =*@* u ?* W i  D; v G; H; < d e i > i A N N $i =2 N N  N ) H e !N  z   1r    ]  ]  ] ] ] ] ] .n G  H z J 0 z    Z  z        z > )v    z W  S = !  #  : : *  >  & & A    D n G : a > *       96 " z E C b b   ! " 2 #d $f % &)? ')j (+j ) 2 * +& ,j -? .^ / 0.j@* ) 1H 2.? 30? 41? 5 6 7 8 92? :3? ;I <# =. >K ?0Z @. A#. B r C8? D+. E FKN G+ H$ I- Jn KP^ L M3 N_ O& PL Q- R3 SM T>Z U V W X Y Z [  \ ] ^ _ ` a b! cU d# eE fj g? h@ i& jB kC > )v    z W  S = !  #  : : *  >  & & A    D n G : a > *       96 " z E C b b   ! " 2 #d $f % &)? ')j (+j ) 2 * +& ,j -? .^ / 0.jCHECKUSEsCHGtCHGDATSTRUC-CHKuCHKABSADRvCHKALTHOMEwCHKDOMCHKPRIHOMExCHKRELADRyCHKSCBzCHM|CHMONIS{CHMVEC|CHN}CIADBEMPTYCIASHUTDOWNCIASTARTINGUPCIATERMINATEDCIBLIMCIPORTCIRCUITo CIRCUITCIRCUITCIRCULARCJLCLASDISABCLASMISSCLASNPCLASS=CLASS?CLASSI CLASShCLASSCLASSCLASSCLASSCLASSCLASSCLASSCLASSCLASSCLASSCLASSESCLASSESCLASUNKCLAUSE CLAUSE CLAUSECLAUSECLEANINGm CLEARINGCLEARINGHOUSECLEARINGHOUSE"CLEARINGHOUSES#CLEARINGHOUSES*CLERK CLICLICLICLICLICLIENTCLIENTCLIENTCLIENT CLIENT#CLIENT{CLIENTCLIENTCLIENTCLIENTCLIENTCLIENTCLIENTCLIENTCLOSE CLIENTNOTIFYCLIERRCLIFAILCLIFRCEXTCLIMISMATCHCLIPBOARDCLIPBOARDCLIPBOARDCLIPBOARDCLIPBOARDFAILCLIPBOARDLOCKEDCLIPBOARDNODATACLIPBOARDZEROCLIPROTCLISYMTBLCLITABLESCLITBLFAILCLITBLPROTCLIWARNMSGCLOCKOCLOSECLOSE[CLOSEgCLOSECLOSECLIENTCLOSEDCLOSEDCLOSEDELCLOSEDICCLOSEERRCLOSEERRCLOSEERRCLOSEERRCLOSEFAIL[CLOSEFOREIGNCLOSEINCLOSEINCLOSEINCLOSEOUTCLOSEOUTCLOSEOUTCLOSEOUTCLOSESERVERCLOSING&CLOSINGCLOSINGCLOSINGCLOSINGCLOSINGCLOSINGCLOSINGCLOSINGCLOSINGCLOSINGCLOSINGCLOSINGCLOSINGCLOSINGCLREFCFERCLSTBLERRCLUBELBASCLUEXITCLUGDIFFCLULISTCLUPDIFFCLUSCOMMCLUSTER@CLUSTERDCLUSTERFCLUSTERCLUSTERCLUSTERCLUSTERCLUSTERCLUSTERCLUSTERCLUSTERCLUSTERCLUSTERCLUSTERCLUSTERCLUSTERCLUSTERCLUSTERCLUSTERCLUSTERCLUSTERCLUSTERS\CMDERRORCMDINPUTCMDLINCMDNOTALLINPIPCMDNOTEXCMDNOTFNDCMDNOTVLDCMDOBSCMDOBSCMDPROCCMDSYNTAXCMDSYNTAXCMDTOOLONGCMDTOOLONGCMKRNLCMODSUPRCMODUSERCMPOUTF11CNFCNFCNFLTQUALSCNFOVRCNFQUAVALCNSCNTRLm CNTRLYCNTRSOBSCNVERRCNVRTINGCNXMGRERRCOBCODCODECODECODECODE#CODE$CODE)CODE-CODE.CODE1CODE3CODE4CODE5CODE6CODE9CODEICODETCODEZCODEcCODElCODEpCODEsCODEvCODEzCODE|CODE}CODE~CODE CODECODECODECODECODECODECODECODECODECODECODECODECODECODECODECODECODECODECODECODGENWARNCOFCOICOLLATE COLLECTCOLLECTIONCOLLERRCOLUMNSCOMCOMCOMCOMBCLUCOMBINATIONCOMBINATIONCOMBINATIONCOMBINECOMCODCOMFAILCOMFILCOMFILEMTYCOMMAmCOMMACOMMANDCOMMANDCOMMANDCOMMAND%COMMAND(COMMAND/COMMANDHCOMMANDTCOMMAND\COMMAND_COMMAND`COMMAND`COMMANDaCOMMANDbCOMMANDqCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMAND COMMAND COMMAND COMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDCOMMANDS)COMMANDSCOMMAND_REPEATCOMMAS COMMERRORCOMMHARDCOMMIT0COMMONCOMMONCOMMSYNCCOMMUNICATECOMMUNICATINGCOMMUNICATIONCOMMUNICATIONSCOMMUNICATIONSCOMMUNICATIONSCOMMUNICATIONSCOMM_FAILCOMOREXECOMPAQ COMPARECOMPAREDCOMPATCOMPATIBILITYCOMPILATIONCOMPILATIONCOMPILATIONCOMPILATIONCOMPILATIONCOMPILEDCOMPILEFAILCOMPILER*COMPLETECOMPLETED COMPLETED! COMPLETED" COMPLETED# COMPLETED$ COMPLETED% COMPLETED& COMPLETEDCOMPLETEDCOMPLETEDCOMPLETELYCOMPLETELY(COMPLETIONCOMPLEXCOMPLIANCECOMPLXCOMPLYNCOMPLYFAILCOMPONENT COMPONENT COMPONENTCOMPONENTCOMPRESSCOMPRESS COMPRESSED3COMPRESSED;COMPRESSEDSCOMPRESSEDCOMPRESSIONSCOMPRESSIONCONABORTCONAPPLICATIONCONATMPTCONCATCONCATENATECONCEALEDCONDCAFTCONDCINCONDITION)CONDITIONVCONDITIONWCONDITIONnCONDITIONCONDITIONCONDITIONCONDITIONCONDITIONCONDITIONCONDITIONCONDITIONCONDITIONCONDITIONALMCONDNAFTCONDNINCONDVAFTCONDVINCONDZAFTCONDZINCONERRCONFAILCONFBASADRCONFCONCONFDEFREQCONFDELCONFDISCONFFACCONFIGERRCONFIGURATION CONFIGURATIONCONFIGURATIONCONFIGURATIONCONFIGURECONFIGUREDXCONFIGUREDCONFIRMCONFIRMINPUTCONFIXMEMCONFLICTNCONFLICTCONFLICTCONFLICTCONFLICTCONFLICTING CONFLICTING CONFLICTING CONFLICTING CONFLICTING CONFLICTING' CONFLICTINGCONFLICTINGCONFLICTINGCONFLICTINGCONFLICTINGCONFLICTINGCONFLICTS CONFLICTSCONFLICTSCONFMEMCONFNEGCONFNOCONCONFNODISCONFNONNEGCONFNOPARM CONFNOQUAL CONFOPTION CONFOUTPUTS CONFPARM CONFQUAL CONFQUAL CONFQUAL CONFQUAL CONFQUAL2 CONFQUAVAL CONFROUTIMG CONLOST CONNDELETEONLY CONNECFAIL CONNECT CONNECThCONNECT CONNECTCONNECTCONNECTCONNECTCONNECTCONNECTCONNECTCONNECTED CONNECTING CONNECTING CONNECTING CONNECTING%CONNECTIONCONNECTIONCONNECTION CONNECTION CONNECTIONCONNECTION CONNECTION